微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| BIP 3045-2006 | 不銹鋼和交付條件.BS EN 10088不銹鋼標準CD-ROM | Stainless steels and delivery conditions - BS EN 10088 Stainless steel standards CD-ROM |
| BS 1429 | 通用工程彈簧用退火圓鋼絲規范 | Specification for annealed round steel wire for general engineering springs |
| BS 1823-1973 | 醫院手術示范室與病房用不銹鋼空心器皿的規范 | Specification for stainless steel hollow-ware for use in hospital operating-theatres and wards |
| BS 3056-8-1987 | 耐火磚尺寸.第8部分:鋼鐵水包用磚規范 | Sizes of refractory bricks - Specification for bricks for ladles |
| BS 4147-1980 | 鋼鐵防護用瀝青基熱覆層材料(包括相應的底漆)規范 | Specification for bitumen-based hot-applied coating materials for protecting iron and steel, including suitable primers where required |
| BS 4164-2002 | 鋼鐵防護用煤柏油基熱覆材料(包括相應的底漆)規范 | Specification for coal-tar-based hot-applied coating materials for protecting iron and steel, including a suitable primer |
| BS 4515-2-1999 | 陸地和近海鋪設的鋼管焊接規范.雙聯法不銹鋼管道 | Specification for welding of steel pipelines on land and offshore - Duplex stainless steel pipelines |
| BS 4677-1984 | 輸送液體用奧氏體不銹鋼管件的電弧焊規范 | Specification for arc welding of austenitic stainless steel pipework for carrying fluids |
| BS 4825-1-1992 | 食品工業及其他衛生設施用不銹鋼管及接頭.第1部分:管規范 | Stainless steel tubes and fittings for the food industry and other hygienic applications - Specification for tubes |
| BS 4825-2-1992 | 食品工業及其他衛生設施用不銹鋼管及接頭.第2部分:彎頭和三通規范 | Stainless steel tubes and fittings for the food industry and other hygienic applications - Specification for bends and tees |
| BS 4825-3-1992 | 食品工業及其他衛生設施用不銹鋼管及配件.夾緊型連接件規范 | Stainless steel tubes and fittings for the food industry and other hygienic applications - Specification for clamp type couplings |
| BS 4825-4-1992 | 食品工業及其他衛生設施用不銹鋼管及接頭.第4部分:螺紋(IDF型)管接頭規范 | Stainless steel tubes and fittings for the food industry and other hygienic applications - Specification for threaded (IDF type) coupling |
| BS 4825-5-1992 | 食品工業及其他衛生設施用不銹鋼管及接頭.第5部分:凹環形連接管接頭規范 | Stainless steel tubes and fittings for the food industry and other hygienic applications - Specification for recessed ring joint type couplings |
| BS 4880-1-1973 | 小便池規范.第1部分:不銹鋼小便池 | Specification for urinals - Stainless steel slab urinals |
| BS 5194-1-1991 | 外科器械.第1部分:不銹鋼規范 | Surgical instruments. Specification for stainless steel |
| BS 5245-1975 | 不銹鋼軟釬焊連接用磷酸基焊劑 | Specification for phosphoric acid based flux for soft soldered joints in stainless steel |
| BS 5482-1-2005 | 家用丁烷-丙烷燃?xì)庋b置的操作規范.永久性住宅、居住區公園和商業化處所中的鋼管尺寸不超過DN25和波紋不銹鋼 | Code of practice for domestic butane- and propane-gas-burning installations - Installations at permanent dwellings, residential park homes and commercial presmises, with installation pipework sizes not exceeding DN 25 for steel and DN 28 for corrugated stainless steel or copper |
| BS 5950-5-1998 | 建筑物鋼鐵架結構應用.冷成型薄式量規剖面設計實用規程. | Structural use of steelwork in building - Code of practice for design of cold formed thin gauge sections |
| BS 6200-6.1-1990 | 鋼、鐵和其他黑色金屬抽樣與分析.第6部分:火焰吸收光譜測定法導則.第1節: 鋼鐵火焰原子吸收光譜法化學分析 | Sampling and analysis of iron, steel and other ferrous metals - Guidelines on atomic absorption spectrometric techniques - Recommendations for the drafting of standard methods for the chemical analysis of iron and steel by flame atomic absorption spectrometry |
| BS 6200-6.2-1990 | 鋼、鐵和其他黑色金屬的抽樣與分析法.第6部分:原子吸收光譜測定法導則.第2節:用火焰原子吸收光譜法對鋼鐵進 | Sampling and analysis of iron, steel and other ferrous metals - Guidelines on atomic absorption spectrometric techniques - Recommendations for the application of flame atomic absorption spectrometry in standard methods for the chemical analysis of iron and steel |
| BS 6318-2 | 斗式升降機.第2部分:標定圓鋼連接鏈垂直斗式升降機尺寸規范 | Bucket elevators - Specification for dimensions of vertical bucket elevators with calibrated round steel link chains |
| BS 6362-1990 | 按BS21 "帶壓密接合螺紋接頭的管及配件管螺紋" 攻絲的不銹鋼管規范 | Specification for stainless steel tubes suitable for screwing in accordance with BS 21 'Pipe threads for tubes and fittings where pressure-tight joints are made on the threads' |
| BS 6521 | 校準圓鋼鏈節起重鏈正常使用和維修指南 | Guide for proper use and maintenance of calibrated round steel link lifting chains |
| BS 6593-1985 | 絞合紡織物和鋼鐵加強傳送帶的現場非機械連接實用規程 | Code of practice for on-site non-mechanical jointing of plied textile and steel reinforced conveyor belting |
| BS 6744-2001 | 用于混凝土的加筋用不銹鋼棒.要求和試驗方法 | Stainless steel bars for the reinforcement of and use in concrete - Requirements and test methods |
| BS 7252-1-1997 | 外科植入物用金屬材料.可鍛不銹鋼規范 | Metallic materials for surgical implants - Specification for wrought stainless steel |
| BS 7252-9-1993 | 外科植物入用金屬材料.第9部分:高氮不銹鋼規范 | Metallic materials for surgical implants - Specification for high-nitrogen stainless steel |
| BS 7838-1996 | 直徑達到28 mm的低壓氣體管道系統用的波紋狀不銹鋼半硬式管材和有關配件規范 | Specification for corrugated stainless steel semi-rigid pipe and associated fittings for low-pressure gas pipework of up to 28 mm |
| BS DD ENV 1090-6-2001 | 鋼結構的施工.不銹鋼的補充規則 | Execution of steel structures - Supplementary rules for stainless steel |
| BS EN 10021-1993 | 鋼鐵制品的一般交貨技術條件 | General technical delivery requirements for steel and iron products |
| BS EN 10028-7-2000 | 承受壓力用的平鋼板制品規范.不銹鋼 | Flat products made of steels for pressure purposes - Stainless steels |
| BS EN 10036-1991 | 黑色金屬材料的化學分析.鋼鐵中碳總含量的測定.在氧氣流中燃燒后的重力測定法 | Chemical analysis of ferrous materials - Determination of total carbon in steels and irons - Gravimetric method after combustion in a stream of oxygen |
| BS EN 10060 | 一般用途熱軋圓鋼棒.尺寸及形狀和尺寸公差 | Hot rolled round steel bars for general purposes - Dimensions and tolerances on shape and dimensions |
| BS EN 10071-1991 | 黑色金屬材料的化學分析.鋼鐵中錳含量的測定.電勢滴定法 | Chemical analysis of ferrous materials - Determination of manganese in steels and irons - Electrometric titration method |
| BS EN 10088-1-2005 | 不銹鋼.不銹鋼的清單 | Stainless steels - List of stainless steels |
| BS EN 10088-2-2005 | 不銹鋼.一般用途耐腐蝕鋼薄板/板材和帶材的交貨技術條件 | Stainless steels - Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| BS EN 10088-3-2005 | 不銹鋼.通用耐腐蝕鋼制半成品、棒材、桿材、線材、型材和光亮產品的交貨技術條件 | Stainless steels - Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| BS EN 10108 | 冷鍛和冷擠壓圓鋼棒.尺寸和公差 | Round steel rod for cold heading and cold extrusion - Dimensions and tolerances |
| BS EN 1011-3-2000 | 焊接.金屬材料焊接的推薦規范.不銹鋼的電弧焊接 | Welding - Recommendations for welding of metallic materials - Arc welding of stainless steels |
| BS EN 10136-1991 | 黑色金屬材料的化學分析.鋼鐵中鎳含量的測定.火焰原子吸收光譜測定法 | Chemical analysis of ferrous materials - Determination of nickel in steels and irons - Flame atomic absorption spectrometric method |
| BS EN 10151-2002 | 彈簧用不銹鋼帶材.交貨技術條件 | Stainless steel strip for springs - Technical delivery conditions |
| BS EN 10211-1996 | 鋼鐵材料的化學分析.鋼和鐵中鈦含量的測定.火焰原子吸收光譜法 | Chemical analysis of ferrous materials - Determination of titanium in steel and iron - Flame atomic absorption spectrometric method |
| BS EN 10217-7-2005 | 壓力用途焊接鋼管.交貨技術條件.不銹鋼管 | Welded steel tubes for pressure purposes - Technical delivery conditions - Stainless steel tubes |
| BS EN 10222-5-2000 | 壓力容器用鋼鍛件.馬口鐵鋼,奧氏體鋼,奧氏體-鐵素體不銹鋼 | Steel forgings for pressure purposes - Martensitic, austenitic and austenitic-ferritic stainless steels |
| BS EN 10228-4-1999 | 鋼鍛件無損檢驗.奧氏體和奧氏體-鐵素體不銹鋼鍛件超聲檢驗 | Non-destructive testing of steel forgings - Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings |
| BS EN 10250-4-2000 | 一般工程用敞口鋼模鍛件.不銹鋼 | Open steel die forgings for general engineering purposes - Stainless steels |
| BS EN 10263-5-2001 | 冷加工和冷擠壓鋼棒、棍和線.不銹鋼交付技術條件 | Steel rod, bars and wire for cold heading and cold extrusion - Technical delivery conditions for stainless steels |
| BS EN 10264-4-2002 | 鋼絲和鋼絲產品.繩索用鋼絲.不銹鋼絲 | Steel wire and wire products - Steel wire for ropes - Stainless steel wire |
| BS EN 10270-3-2001 | 機械彈簧鋼絲.不銹鋼彈簧鋼絲 | Steel wire for mechanical springs - Stainless spring steel wire |
| BS EN 10272-2000 | 壓力裝置用不銹鋼棒材 | Stainless steel bars for pressure purposes |
| BS EN 10276-1-2000 | 鐵素體材料的化學分析.鋼鐵中氧含量測定.氧測定用鋼樣品的抽樣和制備 | Chemical analysis of ferrous materials - Determination of oxygen in steel and iron - Sampling and preparation of steel samples for oxygen determination |
| BS EN 10276-2-2003 | 鋼鐵材料的化學分析.鋼和鐵中氧的含量測定.在惰性氣體中熔解后紅外法 | Chemical analysis of ferrous materials - Determination of oxygen in steel and iron - Infrared method after fusion under inert gas |
| BS EN 10296-1 | 機械和一般工程用焊接圓鋼管.技術交貨條件.非合金和合金鋼管 | Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Non-alloy and alloy steel tubes |
| BS EN 10307-2002 | 無損檢驗.厚度大于或等于6mm的奧氏體鐵素體不銹鋼體鋼扁平軋材的超聲波檢測(反射檢測法) | Non-destructive testing - Ultrasonic testing of austenitic and austentitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method) |
| BS EN 10312-2003 | 包括人生活用水在內的水成液輸送用焊接不銹鋼管.交貨技術條件 | Welded stainless steel tubes for the conveyance of aqueous liquids inclu ding water for human consumption - Technical delivery conditions |
| BS EN 1124-1-1999 | 污水系統用帶套管和孔座的縱向焊接不銹鋼管和配件.要求、測試和質量控制 | Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control |
| BS EN 1124-2-1999 | 廢水系統用插接式縱向焊接不銹鋼管道和配件.系統5.尺寸 | Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - System S. Dimensions |
| BS EN 1124-3-1999 | 污水系統用帶套管和孔座的縱向焊接不銹鋼管和配件.系統X、尺寸 | Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - System X; dimensions |
| BS EN 12072-2000 | 焊接消耗品.不銹鋼和耐熱鋼電弧焊用金屬線電極,金屬線和桿.分級 | Welding consumables - Wire electrodes, wires and rods for arc welding of stainless and heat-resisting steels - Classification |
| BS EN 12330-2000 | 金屬腐蝕防護.鋼鐵的鎘電解鍍層 | Corrosion protection of metals - Electrodeposited coatings of cadmium on iron or steel |
| BS EN 12502-4-2005 | 金屬材料腐蝕防護.配水和蓄水系統中腐蝕可能性的評價指南.不銹鋼的影響因素 | Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Influencing factors for stainless steels |
| BS EN 13025-2 | 包裝.輕型金屬容器.20000ml、25000ml和30000ml標稱容量不可移動蓋(活蓋)圓鋼和馬口鐵容器 | Packaging — Light gauge metal containers — Part 2: Non-removable head (tight head) round steel and tinplate containers with a nominal capacity of 20000 ml, 25000 ml and 30000 ml |
| BS EN 13025-3 | 包裝.輕型金屬容器.20000ml、25000ml和30000ml標稱容量可移動蓋(活蓋)圓鋼和馬口鐵容器 | Packaging — Light gauge metal containers — Part 3: Removable head (open head) round steel and tinplate containers with a nominal capacity of 20000 ml, 25000 ml and 30000 ml |
| BS EN 13322-2-2003 | 可運輸?shù)臍馄?可再充填的焊接鋼瓶.設計和制造.不銹鋼 | Transportable gas cylinders - Refillable welded steel gas cylinders - Design and construction - Stainless steel |
| BS EN 13828-2003 | 建筑物用閥.建筑物內飲用水供給用手動銅合金及不銹鋼球閥.試驗及要求 | Building valves - Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings - Tests and requirements |
| BS EN 14222-2003 | 不銹鋼火管鍋爐 | Stainless steel shell boilers |
| BS EN 14330 | 內河航行船舶.無檔錨鏈.圓鋼鏈 | Inland navigation vessels - Studless anchor chain - Round steel link chain |
| BS EN 14638-1-2006 | 可運輸?shù)臍馄?容量不超過150升的可再充氣焊接容器.焊接奧氏體的試驗方法證明設計的不銹鋼氣瓶 | Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Welded austenitic stainless steel cylinders made to a design justified by experimental methods |
| BS EN 1600-1997 | 焊接用料.不銹鋼和耐熱鋼手工金屬弧焊用的涂覆電極.分類 | Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat resisting steels - Classification |
| BS EN 1964-3-2000 | 移動式儲氣瓶.水容量由0.5升到150升(包括150升)的可再充氣的移動式無縫鋼制儲氣瓶的設計和建造規范.Rm值低 | Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres - Cylinders made of seamless stainless steel with an Rm value of less than 1 100 MPa |
| BS EN 24937-1991 | 鋼鐵.鉻含量測定.電勢或目視滴定法 | Steel and iron - Determination of chromium content - Potentiometric or visual titration method |
| BS EN 3145 | 熱軋圓鋼棒.標準公差.直徑6mm D 250mm.尺寸 | Round bars, hot rolled in steel - Normal tolerances - Diameter 6 mm D 250 mm - Dimensions |
| BS EN 502-2000 | 金屬屋面板.不銹鋼制全支撐產品規范 | Roofing products from metal sheet - Specification for fully supported products of stainless steel sheet |
| BS EN 508-1-2000 | 金屬制屋面產品.鋼,鋁和不銹鋼薄板材自撐式產品規范.鋼 | Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Steel |
| BS EN 508-2-2000 | 金屬制屋面產品.鋼,鋁和不銹鋼薄板材自撐式產品規范.鋁 | Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Aluminium |
| BS EN 508-3-2000 | 金屬制屋面產品.鋼,鋁和不銹鋼薄板材自撐式產品規范.不銹鋼 | Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Stainless steel |
| BS EN 60404-4-1997 | 磁性材料.鋼鐵直流磁性能的測量方法 | Magnetic materials - Methods of measurement of d.c. magnetic properties of iron and steel |
| BS EN 61249-7-1 | 互連接裝置用材料.第7部分:芯約束用材料分規范.第1節:銅/殷鋼/銅 | Materials for interconnection structures - Sectional specification set for restraining core materials - Copper/invar/copper |
| BS EN ISO 1127-1997 | 不銹鋼管.尺寸、公差和單位長度的常規質量 | Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length |
| BS EN ISO 14284-2002 | 鋼鐵.測定化學成分用的樣品的取樣和制備 | Steel and iron - Sampling and preparation of samples for the determination of chemical composition |
| BS EN ISO 1461-1999 | 加工鋼鐵制品的熱浸鍍鋅層.規格和試驗方法 | Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods |
| BS EN ISO 16048-2003 | 耐腐蝕不銹鋼緊固件的鈍化 | Passivation of corrosion-resistant stainless-steel fasteners |
| BS EN ISO 2338-1998 | 未淬硬鋼和奧氏體不銹鋼制的平行銷 | Parallel pins of unhardened steel and austenitic stainless steel |
| BS EN ISO 3506-1-1998 | 耐腐蝕不銹鋼緊固件的機械特性.螺栓、螺釘和螺柱 | Mechanical properties of corrosion-resistant stainless-steel fasteners - Bolts, screws and studs |
| BS EN ISO 3506-2-1998 | 耐腐蝕不銹鋼緊固件的機械特性.螺母 | Mechanical properties of corrosion-resistant stainless-steel fasteners - Nuts |
| BS EN ISO 3506-3-1998 | 耐腐蝕不銹鋼緊固件的機械特性.不受拉伸應力作用的定位螺絲和同類緊固件 | Mechanical properties of corrosion-resistant stainless-steel fasteners - Set screws and similar fasteners not under tensile stress |
| BS EN ISO 3506-4-2003 | 耐腐蝕不銹鋼緊固件的機械特性.攻絲螺釘 | Mechanical properties of corrosion-resistant stainless-steel fasteners - Tapping screws |
| BS EN ISO 3651-1-1998 | 不銹鋼耐晶間腐蝕的測定.奧氏體和鐵素體－奧氏體(二相)不銹鋼.測定不銹鋼在硝酸介質中質量損失的腐蝕試驗 | ( Determination of resistance to intergranular corrosion of stainless steels - Austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in nitric acid medium by measurement of loss in mass (Huey test) |
| BS EN ISO 3651-2-1998 | 不銹鋼耐晶間腐蝕的測定.第2部分:鐵素體、奧氏體、鐵素體－奧氏體(二相)不銹鋼.含有硫酸的介質中的腐蝕試驗 | Determination of resistance to intergranular corrosion of stainless steels - Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric acid |
| BS EN ISO 7046-2-1995 | H型或Z型十字槽沉頭螺釘.A級產品.8.8級,不銹鋼和非鐵類金屬鋼特性 | Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A. Steel of property class 8.8, stainless steel and non-ferrous metals |
| BS EN ISO 7153-1-1991 | 外科器械.金屬材料.不銹鋼 | Surgical instruments - Metallic materials - Stainless steel |
| BS EN ISO 8249-2000 | 焊接.奧氏體和雙重鐵氧體奧氏體鎳不銹鋼焊接金屬中鐵素體數的測定 | Welding - Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals |
| BS EN ISO 8442-2-1998 | 與食品密切接觸的材料和物品.餐具和桌餐盤.不銹鋼和鍍銀餐具的要求 | Materials and articles in contact with foodstuffs - Cutlery and table holloware - Requirements for stainless steel and silver-plated cutlery |
| BS EN ISO 8733-1998 | 未淬硬鋼或奧氏體不銹鋼的帶內螺紋的平行銷 | Parallel pins with internal thread, of unhardened steel or austenitic stainless steel |
| BS EN ISO 8734-1998 | 淬硬鋼或馬氏體不銹鋼制平行銷(定位銷) | Parallel pins, of hardened steel or martensitic stainless steel (Dowel pins) |
| BS EN ISO 8735-1998 | 淬硬鋼和馬氏體不銹鋼制帶內螺紋的平行銷 | Parallel pins with internal thread, of hardened steel or martensitic stainless steel |
| BS EN ISO 9626-1991 | 醫療器具制造用的不銹鋼針管 | Stainless steel needle tubing for the manufacture of medical devices |
| BS ISO 15350-2001 | 鋼鐵.碳和硫總含量的測定.感應爐燃燒后的紅外線吸收法(常規法) | Steel and iron - Determination of total carbon and sulfur content - Infrared absorption method after combustion in an induction furnace (routine method) |
| BS ISO 15730-2001 | 金屬和其他無機涂層.采用電解拋光精加工和鈍化不銹鋼 | Metallic and other inorganic coatings - Electropolishing as a means of smoothing and passivating stainless steel |
| BS ISO 17058-2004 | 鋼鐵.砷含量的測定.分光光度法 | Steel and iron - Determination of arsenic content - Spectrophotometric method |
| DD ENV 1090-6-2001 | 鋼結構施工.不銹鋼的補充規則 | Execution of steel structures. Supplementary rules for stainless steel |
| 編號 | 中文名稱 | 英文名稱 |