微信掃一掃，立即回復！
| 序號 | 編號 | 中文名稱 | 英文名稱 |
|---|---|---|---|
| 1 | GB/T 11699-2003 | 舷內機小艇錐度為1∶10的螺旋槳軸端和槳轂 | Small craft with inboard engine--Propeller shaft ends and bosses with 1∶10 taper |
| 2 | GB/T 12916-1991 | 船用金屬螺旋槳技術條件 | Specification for marine metallic propeller |
| 3 | GB/T 19309-2003 | 舷內機小艇錐度為1∶16的螺旋槳軸端和槳轂 | Small craft with inboard engine--Propeller shaft ends and bosses with 1∶16 taper |
| 4 | GB/T 13411-1992 | 船用可調螺距螺旋槳技術條件 | Technical requirements for marine controllable pitch propellers |
| 5 | NF J65-505-2-2003 | 船舶和海運技術.船用推進裝置.第2部分:可變槳矩的螺旋槳裝置詞匯 | (Ships and marine technology - Propulsion plants for ships - Part 2 : vocabulary for controllable-pitch propeller plants.) |
| 6 | NF L87-121-1966 | 螺旋槳.互換性 | (PROPELLER HUBS. INTERCHANGEABILITY CHARACTERISTICS.) |
| 7 | NF J65-120-1958 | 造船工業.軸線.螺旋槳螺母制動原則 | (SHIPBUILDING. SHAFT LINES. PRINCIPLES FOR LOCKING OF PROPELLER NUTS.) |
| 8 | NF J65-113-1958 | 造船工業.軸線.螺旋槳用圓螺母 | (SHIPBUILDING. SHAFT LINES. GROOVED PROPELLER NUTS.) |
| 9 | NF J65-115-1958 | 造船工業.軸線.螺旋槳用螺母蓋 | (SHIPBUILDING. SHAFT LINES. COMBINED NUTS AND SPINNERS.) |
| 10 | NF L87-110-1966 | 普通螺旋槳軸.組裝和標稱尺寸 | (PLAIN PROPELLER SHAFT. ASSEMBLY AND NOMINAL DIMENSIONS.) |
| 11 | NF J65-109-1958 | 造船工業.軸線.螺旋槳用帶座螺母 | (SHIPBUILDING. SHAFT LINES. COLLAR NUTS FOR PROPELLERS.) |
| 12 | NF J65-125-1958 | 造船工業.軸線.螺旋槳軸套前端的油封 | (SHIPBUILDING. SHAFT LINES. FORWARD GLANDS FOR PROPELLER HUPS.) |
| 13 | NF J65-111-1958 | 造船工業.軸線.螺旋槳用普通螺母和帶四個榫頭的罩形螺母 | (SHIPBUILDING. SHAFT LINES. ORDINARY AND CAP PROPELLER NUTS WITH 4 LUGS.) |
| 14 | NF L87-120-1966 | 普通螺旋槳軸.互換性 | (PLAIN PROPELLER SHAFT. INTERCHANGEABILITY CHARACTERISTICS.) |
| 15 | NF L87-123-1955 | 螺旋槳.尾錐 | (PROPELLER HUBS. REAR CONES.) |
| 16 | NF L87-125-1955 | 螺旋槳.緊固螺母 | (PROPELLER HUBS. LOCKNUTS.) |
| 17 | NF J65-505-1967 | 造船工業.內河航行.船用螺旋槳.定義 | (SHIPBUILDING. INLAND NAVIGATION. SHIPS SCREW PROPELLERS. DEFINITIONS.) |
| 18 | NF L87-122-1955 | 螺旋槳.頭錐 | (PROPELLER HUBS. FRONT CONES.) |
| 19 | QB/T 1069-1991 | 螺旋槳攪拌機 | () |
| 20 | HG/T 3796.9-2005 | 板式螺旋槳攪拌器 | () |
| 21 | ISO 484-1-1981 | 造船 船用螺旋槳 制造公差 第1部分:螺旋槳直徑>2.5m | Shipbuilding; Ship screw propellers; Manufacturing tolerances; Part 1 : Propellers of diameter greater than 2,50 m |
| 22 | ISO 484-2-1981 | 造船 船用螺旋槳 制造公差 第2部分:螺旋槳直徑0.80m～2.50m(包括2.50m) | Shipbuilding; Ship screw propellers; Manufacturing tolerances; Part 2 : Propellers of diameter between 0,80 and 2,50 m inclusive |
| 23 | ANSI/ASHRAE 87.3P-2001 | 螺旋槳通風機風扇振動試驗方法.診斷試驗方法 | Method of Testing Propeller Fan Vibration - Diagnostic Test Methods |
| 24 | ANSI/ASHRAE 87.2-2002 | 檢測螺旋槳式風機可靠性的現場試驗法 | In-Situ Method of Testing Propeller Fans for Reliability |
| 25 | ASTM D 5096-2002 | 測定杯形風速計或螺旋槳風速計性能的標準試驗方法 | Standard Test Method for Determining the Performance of a Cup Anemometer or Propeller Anemometer |
| 26 | BS MA 86-1979 | 船舶制造用術語詞匯.船舶用螺旋槳對等術語詞匯表 | Glossary of terms used in shipbuilding: list of equivalent terms for ship screw propellers |
| 27 | BS 7161-1990 | 內列發動機船舶的螺旋漿軸端和螺旋槳轂規范 | Specification for propeller shaft ends and bosses for inboard-engined pleasure craft |
| 28 | BS EN ISO 3715-2-2001 | 船舶和海上技術.船用推進裝置.可變距螺旋槳設備詞匯 | Ships and marine technology - Propulsion plants for ships - Vocabulary for controllable-pitch propeller plants |
| 29 | ISO 8845 Technical Corrigendum 1-1995 | 舷內機小艇 帶1:16錐度的螺旋槳軸端和軸轂 技術勘誤1 | Small craft with inboard engine - Propeller shaft ends and bosses with 1:16 taper; Technical Corrigendum 1 |
| 30 | ISO 3715-1978 | 造船 船用螺旋槳 術語對照表 三種語言版 | Shipbuilding; Ship screw propellers; List of equivalent terms Trilingual edition |
| 31 | ISO 3715 AMD 1-1986 | 造船 船用螺旋槳 術語對照表 修改1 三種語言版 | Shipbuilding; ship screw propellers; list of equivalent terms; amendment 1 |
| 32 | ISO 8845-1994 | 舷內機小艇 帶1:16錐度的螺旋槳軸端和軸轂 | Small craft with inboard engine - Propeller shaft ends and bosses with 1:16 taper |
| 33 | JIS W4606-1995 | 飛行器渦輪軸和渦輪螺旋槳發動機通用規范 | General specification of turboshaft and turboprop engines for aircraft |
| 34 | JIS F4804-1999 | 船用小型螺旋槳的固定部件.錐度為1:16 | Fixing parts of ships' small propellers, Taper 1:16 |
| 35 | JIS F4803-1999 | 造船.船用螺旋槳.制造公差.第2部分:直徑在0.8至2.5M之間含0.8M、2.5M的螺旋槳 | Shipbuilding -- Ship screw propellers -- Manufacturing tolerances -- Part 2: Propellers of diameter between 0.80 and 2.50 m inclusive |
| 36 | JIS F4802-1999 | 造船.船用螺旋槳.制造公差.第1部分:直徑大于2.5M的螺旋槳 | Shipbuilding -- Ship screw propellers -- Manufacturing tolerances -- Part 1: Propellers of diameter greater than 2.50 m |
| 37 | JIS F4801-1999 | 船用小型螺旋槳的固定部件.錐度1:10 | Fixing parts of ships' small propellers, Taper 1:10 |
| 序號 | 編號 | 中文名稱 | 英文名稱 |