微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ANSI Z21.23 | 煤氣器具恒溫器 | Gas Appliance Thermostats |
| ANSI Z21.23-2000 and ANSI Z 21.23a | 燃?xì)馄骶吆銣仄? | Gas Appliance Thermostats |
| ANSI Z21.23b | 燃?xì)馄骶吆銣仄? | Gas Appliance Thermostats |
| ANSI/AAMI II36 | 嬰兒恒溫箱 | Infant Incubators |
| ANSI/ARI 750 | 制冷劑恒溫膨脹閥 | Thermostatic Refrigerant Expansion Valves |
| ANSI/ASTM B753 | 恒溫組份合金規范 | Specification for Thermostat Component Alloys |
| ASTM B 106 | 恒溫金屬撓性的標準試驗方法 | Standard Test Methods for Flexivity of Thermostat Metals |
| ASTM B 223 | 恒溫金屬?gòu)椥阅Ａ康臉?biāo)準試驗方法(懸臂梁法) | Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method) |
| ASTM B 362 | 恒溫雙金屬制螺旋線圈的機械扭轉率的試驗方法 | Test Method for Mechanical Torque Rate of Spiral Coils of Thermostat Metal |
| ASTM B 389 | 恒溫雙金屬螺旋形線圈的熱偏轉率的標準試驗方法 | Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal |
| ASTM B 478 | 恒溫雙金屬橫向彎曲率的測試方法 | Test Method for Cross Curvature of Thermostat Metals |
| ASTM B 753 | 恒溫器組件用合金標準規范 | Standard Specification for Thermostat Component Alloys |
| ASTM D 1989 | 用微處理機控制的恒溫量熱器測量煤和焦炭總熱值的試驗方法 | Test Method for Gross Calorific Value of Coal and Coke by Microprocessor Controlled Isoperibol Calorimeters |
| ASTM E 1292 | 重力對流和強制通風恒溫箱 | Standard Specification for Gravity Convection and Forced Ventilation Incubators |
| ASTM E 487 | 化學材料的恒溫穩定性的標準試驗方法 | Standard Test Method for Constant-Temperature Stability Of Chemical Materials |
| BS 7478 | 恒溫散熱器閥的選擇和使用指南 | Guide to selection and use of thermostatic radiator valves |
| BS 7942 | 檢修機構用恒溫混合閥 | Thermostatic mixing valves for use in care establishments |
| BS EN 1111 | 衛生用具龍頭.恒溫混合閥(PN10).一般技術規范 | Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification |
| BS EN 1287 | 衛生排水塞.低壓恒溫混合閥.一般技術規范 | Sanitary tapware - Low pressure thermostatic mixing valves - General technical specifications |
| BS EN 215 | 恒溫散熱器控制閥.要求和試驗方法 | Thermostatic radiator valves - Requirements and test methods |
| BS EN 257 | 燃?xì)馄骶哂脵C(jī)械恒溫器 | Mechanical thermostats for gas-burning appliances |
| BS EN ISO 9046 | 建筑施工.連接產品.恒溫下密封劑的粘附/粘結性能的測定 | Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at constant temperature |
| DIN 1715-1 | 恒溫器用金屬.交貨技術條件 | Thermostat metals; technical delivery conditions |
| DIN 1715-2 | 恒溫器用金屬.熱曲率比的檢驗 | Thermostat metals; testing the specific thermal curvature |
| DIN 51900-2 | 固體和液體燃料檢驗.用彈式量熱計測定總熱值和計算凈熱值.第2部分:恒溫環境或固定套量熱計法 | Testing of solid and liquid fuels - Determination of the gross calorific value by the bomb calorimeter and calculation of the net calorific value - Part 2: Method using isoperibol ot static, jacket calorimeter |
| DIN 58945-1 | 微生物產品用恒溫箱.第1部分:術語、要求、使用 | Incubators for microbiological purposes; terms, requirements, use |
| DIN 58945-2 | 微生物產品用恒溫箱.第2部分:檢驗 | Incubators for microbiological purposes; testing |
| DIN EN 1111 | 衛生設備管件.恒溫混合閥(PN 10).通用技術規范 | Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification; German version EN 1111:1998 |
| DIN EN 1287 | 衛生器具管件.低壓恒溫混合閥.通用技術規范 | Sanitary tapware - Low pressure thermostatic mixing valves; general technical specification; German version EN 1287:1999 |
| DIN EN 215 | 恒溫散熱器閥.要求和試驗方法 | Thermostatic radiator valves - Requirements and test methods; German version EN 215:2004 + A1:2006 |
| DIN EN 2591-615 | 航空航天系列.光電連接件.試驗方法.第615部分:光學元件.恒溫下電纜連接完整性 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 615: Optical elements; Connection integrity at temperature; German and English version EN 2591-615:2001 |
| DIN EN 2794-004 | 航空航天系列.額定電流為20A至50A的單極的恒溫補償電路斷路保護開關.第004部分:UNC螺紋端子.產品標準 | Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A - Part 004: UNC thread terminals; product standard; German version EN 2794-004:1999 |
| DIN EN ISO 9046 | 房屋建筑.連接產品.恒溫下密封膠的粘附/粘合性能的測定 | Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at constant temperature (ISO 9046:2002); German version EN ISO 9046:2004 |
| EN 1287 | 衛生間泄水器 低壓恒溫混合閥 通用技術規范 | Sanitary tapware - Low pressure thermostatic mixing valves - General technical specifications |
| EN 215-1-1987+AC1 | 恒溫散熱閥 第1部分：要求和試驗方法 | Thermostatic radiator valves; Part 1: Requirements and test methods |
| EN 257 | 燃?xì)馄骶哂脵C(jī)械恒溫器 | Mechanical thermostats for gas-bruning appliances |
| EN 29046 | 房層建筑 密封膠 恒溫下粘合性能的測定 | Building construction - Jointing products - Determination of adhesion/cohesion properties at constant temperatures (ISO 9046:1987) |
| IEC 60389-1 AMD 1 | 主要用于通信設備和采用類似技術的電子應用方面的恒溫開關 第1部分:一般要求和測量方法 修改1 | Thermostatic switches primarily for use in equipment for telecommunications and in electronic applications employing similar techniques. Part 1 : General requirements and measuring methods |
| IEC 60389-1 | 主要用于通信設備和采用類似技術的電子應用方面的恒溫開關 第1部分:一般要求和測量方法 | Thermostatic switches primarily for use in equipment for telecommunications and in electronic applications employing similar techniques. Part 1 : General requirements and measuring methods |
| ISO 9046 | 建筑結構.連接產品.恒溫下密封劑的粘附和粘結性能的測定 | Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at constant temperature |
| JB/T 5376 | 低溫恒溫槽 技術條件 | () |
| JB/T 5377 | 恒溫水槽 技術條件 | () |
| JB/T 9518 | 恒溫油槽 技術條件 | () |
| JIS B8481 | 室內恒溫器 | Room thermostats |
| JIS F9702 | 造船.裝添系統恒溫器 | Shipbuilding -- Filled system thermostats |
| JIS H7103 | Ti-Ni類形狀記憶合金絲材的恒溫拉力試驗方法 | Method of fixed temperature tensile test for wires of Ti-Ni shape memory alloys |
| JIS H7104 | 形狀記憶合金螺旋彈簧的恒溫負荷試驗方法 | Method of fixed temperature load test for coil spring of shape memory alloys |
| NF C47-110 | 家用自動裝置.環境恒溫調節器 | (Automatic devices for household use. Rooms thermostats.) |
| NF C47-120 | 家用自動裝置.局部供暖設備中恒溫器的專用規則 | (Automatic devices for household use. Particular requirements on thermostats incorporated in fixed room heaters.) |
| NF C93-450 | 電子元件質量保證體系.電氣和電子設備用恒溫器.一般規定 | (Electronic components. Electrical thermostatic switches for use in electronic equipments.) |
| NF D36-500 | 燃?xì)馄骶哂脵C(jī)械式恒溫器 | (Mechanical thermostats for gas-burning appliances.) |
| NF P52-002-1 | 散熱器恒溫閥.第1部分:試驗方法的要求 | (Thermostatic radiator valves. Part 1 : requirements and test methods.) |
| NF X15-140 | 空氣濕度的測量.氣候?qū)嶒?yàn)室和恒溫室.表征和檢定 | (Measurement of air moisture - Climatic and thermostatic chambers - Characterisation and verification.) |
| QB/T 1741 | 電熱片蚊香用恒溫電加熱器 | () |
| prEN 1042 | 塑料管道系統 聚烯烴管和/或配件間的熔接連接件 恒溫下內部壓力抵抗力的測定 | Plastics piping systems - Fusion joints between polyolefin pipes and/or fittings - Determination of resistance to internal pressure at constant temperature |
| prEN 215-2 | 恒溫散熱閥 第2部分：連接尺寸和細節 | Thermostatic radiator valves; part 2: dimensions and details on connection |
| 編號 | 中文名稱 | 英文名稱 |