ANSI——美國國家標準（英中對照翻譯）目錄4

編號	中文名稱	英文名稱
ANSI C12.14-1982	電度表用磁帶脈沖記錄器	Magnetic tape pulse recorders for electricity meters
ANSI C12.15-1990	機電式電度表計量用固態最大需用瓦時計	Solid-state demand registers for electromechanical watthour meters
ANSI C12.16-1991	固態電量計	Solid-state electricity meters
ANSI C12.17-1991	電度表用盒式固態脈沖存儲器	Cartridge-type solid-state pulse recorders for electricity metering
ANSI C12.20-2003	0.2和0.5的精確度等級的電量計	(Electricity Meters 0.2 and 0.5 Accuracy Classes )
ANSI C12.4-1984	機械式最大需量記錄器	Mechanical demand registers
ANSI C12.5-1978	耗熱表	Thermal Demand Meters
ANSI C12.6-1987	測量用移相器的標電和端子的布置	Marking and arrangement of terminals for phase-shifting devices used in metering
ANSI C12.7-2005	電度表插座要求
ANSI C12.8-1981	整裝A型基座裝置的電度表、測試裝置和操縱臺	Test blocks and cabinets for installation of self-contained A-base watthour meters
ANSI C12.9-2005	變壓器額定儀表用測試開關
ANSI C135.1-1979	架空線路用鍍鋅鋼制螺栓和螺母	Galvanized Steel Bolts and Nuts for Overhead Line Construction
ANSI C135.3-1987	架設電線桿和傳輸線路用鍍鋅鐵方頭螺釘	Zinc-coated ferrous lag screws for pole and transmission line construction
ANSI C135.38-1987	鍍鋅鐵制帶墊圈的螺栓和帶墊圈的螺母	Zinc-coated ferrous washerhead bolts and washer nuts
ANSI C135.4-1987	架空線路架設用鍍鋅鐵制吊環螺母和眼螺栓	Zinc-coated ferrous eyebolts and nuts for overhead line construction
ANSI C135.5-1987	架空線路架設用鍍鋅鐵制吊環螺母和眼螺栓	Zinc-coated ferrous eyenuts and eyebolts for overhead line construction
ANSI C136.1-1991	白熾路燈的選擇指南	Roadway ligthing - Filament lamps - Guide for selection
ANSI C136.1-2004	道路照明.白熾燈.選擇指南
ANSI C136.12-2004	道路照明設備用汞燈的選擇指南
ANSI C136.13-2004	道路和區域照明設備.木制電桿的金屬支架
ANSI C136.14-2004	道路和區域照明設備.水平發光高強度放電燈內封閉式側裝橢圓形照明燈
ANSI C136.16-2004	道路照明設備中封閉式柱頂安裝照明燈具
ANSI C136.2-2004	道路照明設備.燈具的電壓分級
ANSI C136.21-1987	道路照明.與柱頂安裝式發光設備共用的垂直榫頭照明設備	Roadway Lighting - Vertical Tenons Used with Post-Top-Mounted Luminaires
ANSI C136.21-2004	道路照明.柱頂安裝式照明設備用立式榫頭
ANSI C136.22-1988	道路照明設備發光體的內標簽	Roadway Lighting Equipment - Internal Labeling of Luminaires
ANSI C136.22-2004	道路照明設備.燈具的內標簽
ANSI C136.27-2005	鐵路和區域照明設備.隧道和地道照明燈具
ANSI C136.3-2005	道路照明設備.照明裝置附件
ANSI C136.33-2005	公路和區域照明設備.高強度放電點火器用插接式插孔和插頭
ANSI C136.34-2004	道路和區域照明設備.道路和區域照明燈具的裝飾保護罩
ANSI C136.4-2003	道路照明設備.串行插座和串行插座孔	(Roadway Lighting Equipment - Series Sockets and Series-Socket Receptacles )
ANSI C136.6-2004	道路照明設備.路燈的金屬頭和反光器組件.機械互換性與光學互換性
ANSI C136.9-1990	道路照明設備.用于金屬頭燈座支撐組件.機械互換性	Roadway Lighting Equipment - Socket Support Assemblies for Metal Heads - Mechanical Interchangeability
ANSI C136.9-2004	道路照明.金屬頭中使用的燈座支撐組件的機械互換性
ANSI C136.9-2004	道路照明.金屬頭中使用的燈座支撐組件的機械互換性	(Roadway Lighting - Socket Support Assemblies for Use in Metal Heads, Mechanical Interchangeability )
ANSI C18.1M Part 1-2005	干電池和電池組.規范
ANSI C18.1M Part 2-2003	有水溶電解質的便攜式原電池和蓄電池組.安全標準	(Portable Primary Cells and Batteries with Aqueous Electrolyte - Safety Standard )
ANSI C18.2M Part 1-2003	便攜式可再充電電池和蓄電池組.總則和規范	(Portable Rechargeable Cells and Batteries- General and Specifications )
ANSI C18.3M Part 1-2005	便攜式鋰原電池和電池組.總則和規范
ANSI C18.3M Part 2-2004	便攜式鋰原電池和蓄電池.安全標準
ANSI C18.3M Part 2-2004	便攜式鋰原電池和蓄電池.安全標準	(Portable Lithium Primary Cells and Batteries - Safety Standard )
ANSI C18.3M-1991	原電池.鋰原電池.規范	Primary Batteries - Lithium Primary Batteries - Specifications
ANSI C2-2002	國家電氣安全規程	(National Electrical Safety Code )
ANSI C29.1-1988	電絕緣子.試驗法	Electrical Power Insulators - Test Methods
ANSI C29.10-1989	濕法瓷絕緣子.室內裝置型	Wet-Process Porcelain Insulators - Indoor Apparatus Type
ANSI C29.11-1989	架空輸電線用合成懸掛絕緣子.試驗	Composite Suspension Insulators for Overhead Transmission Lines - Tests
ANSI C29.18-2003	絕緣子復合材料.配線柱型	(Insulators Composite - Distribution Line Post Type )
ANSI C29.2-1992	濕法工藝瓷絕緣子和鋼化玻璃絕緣子(懸式)	Insulators - Wet-process porcelain and toughened glass - Suspension type
ANSI C29.3-1986	濕法瓷絕緣子.柱式	Wet Process Porcelain Insulators - Spool Type
ANSI C29.4-1989	濕法瓷絕緣子.張緊式	Wet-Process Porcelain Insulators - Strain Type
ANSI C29.5-1984	濕法瓷絕緣子.低壓和中壓型	Wet-Process Porcelain Insulators - Low- and Medium-Voltage Types
ANSI C29.8-1985	濕法瓷絕緣子.帽式和針式裝置型	Wet-Process Porcelain Insulators - Apparatus, Cap and Pin Type
ANSI C29.9-1983	濕法瓷絕緣子.接線柱型裝置	Wet-Process Porcelain Insulators - Apparatus, Post-Type
ANSI C37.12-1991	由對稱電流限定的交流高壓斷路器.規范指南	AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis - Specifications Guide
ANSI C37.121-1989	開關設備.變電所.要求	Switchgear - Unit Substations - Requirements
ANSI C37.32-2002	高壓空氣間隔開關、中斷器開關、出始故障開關、接地開關、總線支持和附件控制的電壓范圍.優選參量、結構指	(High-Voltage Air Disconnect Switches Interrupter Switches, Fault Initiating Switches, Grounding Switches, Bus supports and Accessories Control Voltage Ranges - Schedule of Preferred Ratings, Construction Guidelines and Specifications )
ANSI C37.33-1987	開關設備.高壓空氣開關.額定控制電壓及其范圍(附加表1).補充件C37.33A-1990	Switchgear - High-Voltage Air Switches - Rated Control Voltages and Their Ranges (Addition to Table 1); Supplement C 37.33A - 1990
ANSI C37.33a Supplement-1990	高壓空氣開關裝置的額定控制電壓及其范圍(附加至表1)(ANSI C37.33-87的補充件)	Switchgear - High-voltage air switches - Rated control voltages and their ranges; Supplement
ANSI C37.44-1981	配電用油斷路器和熔斷體	Distribution Oil Cutouts and Fuse Links
ANSI C37.45-1981	配電用封裝式單極空氣開關	Distribution Enclosed Single-Pole Air Switches
ANSI C37.50-1989	開關設備.封裝式低壓交流電力線路斷路器.試驗程序	Switchgear - Low-Voltage AC Power Circuit Breakers Used in Enclosures - Test Procedures
ANSI C37.51-1989	開關設備.金屬封裝低壓交流電力線路斷路器的開關裝置組件.一致性試驗程序	Switchgear - Metal-Enclosed Low-Voltage AC Power-Circuit-Breaker Switchgear Assemblies - Conformance Test Procedures
ANSI C37.52-1974	封閉裝低壓交流電力線路保護器的試驗程序	Test Procedures for Low-Voltage AC Power Circuit Protectors Used in Enclosures
ANSI C37.53.1-1989	開關設備.高壓限流電機起動器熔斷器.一致性試驗程序	Switchgear - High-Voltage Current-Limiting Motor-Starter Fuses - Conformance Test Procedures
ANSI C37.54-2003	用作具有金屬外殼的開關設備組件中可移動件的室內交流高壓線路斷路器的合格試驗程序	(Conformance Test Procedures for Indoor Alternating Current High-Voltage Circuit Breakers Applied as Removable Elements in Metal-Enclosed Switchgear Assemblies )
ANSI C37.55-1989	開關設備.金屬封裝開關裝置組件.一致性試驗程序	Switchgear - Metal-Clad Switchgear Assemblies - Conformance Test Procedures
ANSI C37.55-2003	中壓金屬包覆的開關設備附件.合格試驗規程	(Medium Voltage Metal-Clad Switchgear Assemblies -- Conformance Test Procedures )
ANSI C37.57-1990	開關設備.金屬封裝斷路開關組件.一致性試驗	Switchgear - Metal-Enclosed Interrupter Switchgear Assemblies - Conformance Testing
ANSI C37.57-2003	開關設備.金屬封裝的斷續器開關設備組件.一致性試驗	(Switchgear - Metal-Enclosed Interrupter Switchgear Assemblies - Conformance Testing )
ANSI C37.58-1990	開關設備.金屬封裝開關設備用室內交流中壓開關.一致性試驗程序	Switchgear - Indoor AC Medium-Voltage Switches for Use in Metal-Enclosed Switchgear - Conformance Test Procedures
ANSI C37.58-2003	金屬封裝的開關設備中使用的室內交流中壓開關的一致性試驗程序	(Conformance Test Procedures for Indoor AC Medium Voltage Switches for Use in Metal-Enclosed Switchgear )
ANSI C37.72-1987	交流電系統用人工操作的、正面不帶電有負載的斷路開關和可分離連接器的開關	Manually-operated, dead-front padmounted switchgear with load interrupting switches and separable connectors for alternating-current systems
ANSI C37.85-1989	開關設備.交流高壓電力真空斷路器.X射線輻射極限的安全要求	Switchgear - Alternating-Current High -Voltage Power Vacuum Interrupters - Safety Requirements for X-Radiation Limits
ANSI C37.85-2002	電源開關設備用交流高壓電力真空斷路器的X射線輻射限值	(Interrupters Used in Power Switchgear, X-Radiation Limits for AC High-Voltage Power Vacuum )
ANSI C39.1-1981	電氣模擬指示裝置的要求	Requirements for Electrical Analog Indicating Instruments
ANSI C50.10-1990	旋轉電機.同步電機	Rotating Electrical Machinery - Synchronous Machines
ANSI C50.12-1982	水輪機用凸極同步發電機和發電機/電動機的要求	Requirements for Salient-Pole Synchronous Generators and Generator/Motors for Hydraulic Turbine Applications
ANSI C50.13-1989	旋轉電機.圓柱形轉子同步發電機	Rotating Electrical Machinery - Cylindrical-Rotor Synchronous Generators
ANSI C50.14-1977	燃氣輪機驅動的圓柱形轉子同步發電機的要求	Requirements for combustion gas turbine driven cylindrical rotor synchronous generators
ANSI C50.15-1989	旋轉電機.氫冷燃氣渦輪驅動圓柱形轉子同步發電機.要求	Rotating Electrical Machinery - Hydrogen-Cooled, Combustion-Gas-Turbine-Driven, Cylindrical-Rotor Synchronous Generators - Requirements
ANSI C57.12.10-1988	變壓器.不大于230KV,833/958至8333/10417KVA,單相以及750/862至60000/80000/100000KVA,三相,無負載抽頭變換和3750/4687至于60000/80000/100000KVA有負載抽頭變換.安全要求
ANSI C57.12.13-1982	成套設備包括變電站用充液變壓器的一致性要求	Conformance Requirements for Liquid-Filled Transformers Used in Unit Installations, Including Unit Substations
ANSI C57.12.25-1990	變壓器.可拆絕緣高壓連接器的安裝在基座上的間隔式自冷單相配電變壓器.高壓不大于34500Y接地/19920伏,低壓240/120伏,容量不大于167千伏安.要求
ANSI C57.12.27-1982	安裝在基座上的設備包括成套變電所在內的用充液配電變壓器的一致性要求	Conformance Requirements for Liquid-Filled Distribution Transformers Used in Pad-Mounted Installations, Including Unit Substations
ANSI C57.12.50-1981	高壓601至34500伏,低壓120至600伏,容量單相1至500千伏安和三相15至500千伏安,通風干式配電變壓器的要求	Ventilated Dry-Type Distribution Transformers, 1 to 500 kVA, Single-Phase and 15 to 500 kVA, Three-Phase, with High-Voltage 601 to 34 500 Volts, Low-Voltage 120 to 600 Volts, Requirements for; Correction June 1982
ANSI C57.12.51-1981	高壓601至34500伏,低壓208Y/120至4160伏三相容量不小于501千伏安,通風干式電力變壓器的要求	Requirements for Ventilated Dry-Type Power Transformers, 501 kVA and Larger, Three-Phase, with High-Voltage 601 to 34 500 Volts, Low-Voltage 208Y/120 to 4160 Volts
ANSI C57.12.52-1981	高壓:601至34500伏.低壓:208Y/120至4160伏,三相容量不小于501千伏安,密封干式電力變壓器的要求	Requirements for Sealed Dry-Type Power Transformers, 501 kVA and Larger, Three-Phase, with High-Voltage 601 to 34 500 Volts, Low-Voltage 208Y/120 to 4160 Volts
ANSI C57.12.55-1987	變壓器.包括成套變電所在內的成套設備用干式變壓器.一致性標準	Transformers - Dry-Type Transformers Used in Unit Installations, Including Unit Substations - Conformance Standard
ANSI C57.12.70-1978	配電和電力變壓器用終端標志和連接法	Terminal Markings and Connections for Distribution and Power Transformers
ANSI C63.12-1987	電磁兼容性限值推薦標準	Electromagnetic compatibility limits - Recommended practice
ANSI C63.14-1992	電磁兼容性(EMC),電磁脈沖(EMP)和靜電放電(ESD)的技術詞典	Dictionary for technologies of electromagnetic campatibility (EMC), electromagnetic pulse (EMP), and electrostatic discharge (ESD)
ANSI C63.4-1992	低壓電氣和電子儀器發生的9千赫茲至40千兆赫茲范圍的無線電噪聲的測量方法	Methods of measurement of radio-noise - Emissions from low-voltage electrical and electronic equipment in the range of 9 kHz to 40 GHz
ANSI C63.5-1988	在電磁干擾(EMI)控制中校準天線以測量輻射的電磁兼容性	Electromagnetic compatibility - Radiated emission measurements in electromagnetic interference (EMI) control - Calibration of antennas
ANSI C63.7-1992	進行輻射測量的開放區試驗點構造指南	Guide for construction of open-area test sites for performing radiated emission measurements
ANSI C78.1-1991	熒光燈.快速啟動型.尺寸和電氣特性	Fluorescent Lamps - Rapid-Start Types - Dimensional and Electrical Characteristics
ANSI C78.1340-1990	電燈.450瓦230伏B75自鎮流汞燈	Electric Lamps - 450-Watt, 230-Volt, B75 Self-Ballasted Mercury Lamps
ANSI C78.1341-1990	電燈.750瓦120伏自鎮流汞燈	Electric Lamps - 750-Watt, 120-Volt Self-Ballasted Mercury Lamps
ANSI C78.1342-1990	電燈.160瓦120伏B87自鎮流汞燈	Electric Lamps - 160-Watt 120-Volt B87 Self-Ballasted Mercury Lamps
ANSI C78.1380-1988	電燈.250瓦,120伏.自鎮流水銀燈.規范	Electric Lamps - 250-Watt, 120-Volt Self-Ballasted Mercury Lamps - Specifications
ANSI C78.1381-1989	電燈.70瓦M85金屬鹵素燈	Electric Lamps - 70-Watt M85 Metal-Halide Lamps
ANSI C78.1401-1975	放映燈規格.雙觸點中環燈頭向上型	Dimensions for Projection Lamps - Double-Contact, Medium Ring, Base-Up Type
ANSI C78.1401-2004	雙觸點、中等環、燈頭向上型投影燈的規格
ANSI C78.1402-1975	放映燈規格.四腳預聚焦燈頭向下型	Dimensions for Projection Lamps - Four-Pin, Prefocus, Base-Down Type
ANSI C78.1402-2004	四腳、預聚焦、燈頭向下型放映燈的規格
ANSI C78.1404-1991	電燈.DNF放映燈	Electric Lamps - DNF Projection Lamp
ANSI C78.1406-1983	電燈.燈頭向下單觸點中聚焦投影燈.規格	Electric Lamps - Single-Contact Medium Prefocus Base-Down-Type Projection Lamps - Dimensions
ANSI C78.1406-2004	燈頭向下型單觸點、中聚焦放映燈的規格
ANSI C78.1407-1985	電燈.聚光燈.四腳聚焦投影燈反射器.規格	Electric Lamps - Condenser-Reflector, Four-Pin, Prefocus-Base Projection Lamps - Dimensions
ANSI C78.1407-2004	四腳、預聚焦型聚光反射器的放映燈的規格
ANSI C78.1408-1991	電燈.EJL放映燈	Electric Lamps - CBA Projection Lamp
ANSI C78.1408-2004	電燈.CBA放映燈
ANSI C78.1409-1991	電燈.EJL放映燈	Electric Lamps - EJL Projection Lamp
ANSI C78.1410-1991	電燈.ELB放映燈	Electric Lamps - ELB Projection Lamp
ANSI C78.1411-1991	電燈.ELC放映燈	Electric Lamps - ELC Projection Lamp
ANSI C78.1414-1988	電燈.DDM投影燈	Electric Lamps - DDM Projection Lamp
ANSI C78.1415-1989	電燈.DED放映燈	Electric Lamps - DED Projection Lamp
ANSI C78.1416-1991	電燈.FHS投影燈	Electric Lamps - FHS Projection Lamps
ANSI C78.1421-2002	投射燈尺寸和中心定位系統.GZ4基的35mm整體反射輪輞標準燈	(Dimensions and Centering Systems for Projection Lamps - 35mm Integral Reflector Rim Reference Lamps with GZ4 Bases )
ANSI C78.1422-1991	電燈.ENG投影燈	Electric Lamps - ENG Projection Lamp

立即獲取免費預算>>>

http://www.genron.com.cn/webpages/biaozhunfanyi-gongye/161.html

By WWT at 2008-12. [標準翻譯服務]