    
|
| 編號 | 中文名稱 | 英文名稱 |
| BS EN 123500-800-1991 | 電子器件質量評定協調體系.性能詳細規范:有貫通連接的撓性印制電路板 | (Harmonized system of quality assessment for electronic components - Capability detail specification: flexible printed boards with through-connections) |
| BS EN 12351-1999 | 工業閥門.帶法蘭連接的閥門用保護帽 | (Industrial valves - Protective caps for valves with flanged connections) |
| BS EN 12352-2000 | 交通控制設備.報警和安全燈裝置 | (Traffic control equipment - Warning and safety light devices) |
| BS EN 12353-2000 | 化學消毒劑和防腐變劑.殺細菌劑和殺真菌劑活性測定用微生物菌系的保存 | (Chemical disinfectants and antiseptics - Preservation of microbial strains used for the determination of bactericidal and fungicidal activity) |
| BS EN 12354-1-2000 | 建筑聲學.從件性能評定建筑物的聲學性能.房間之間對氣載聲音的隔決 | (Building acoustics - Estimation of acoustic performance in buildings from the performance of elements - Airborne sound insulation between rooms) |
| BS EN 12354-2-2000 | 建筑物聲學.由單性能對建筑物聲音性能評價.房屋間沖擊聲音的隔絕 | (Building acoustics - Estimation of acoustic performance in buildings from the performance of elements - Impact sound insulation between rooms) |
| BS EN 12354-3-2000 | 建筑物聲學.由單性能對建筑物聲音性能評價.對室外氣載聲音的隔絕 | (Building acoustics - Estimation of acoustic performance in buildings from the performance of elements - Airborne sound insultation against outdoor sound) |
| BS EN 12354-4-2000 | 建筑聲學.從件性能評定建筑物的聲學性能.室內到室外的聲音傳遞 | (Building acoustics - Estimation of acoustic performance in buildings from the performance of elements - Transmission of indoor sound to the outside) |
| BS EN 12354-6-2004 | 建筑聲學.從件性能評估建筑物的聲學性能.封閉空間吸聲 | |
| BS EN 12355-2003 | 食品加工機械.剝皮機和去膜機.安全和衛生要求 | (Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requirements) |
| BS EN 1236-1995 | 肥料.容積(松)密度的測定 | (Fertilizers - Determination of bulk density (loose)) |
| BS EN 123600-1997 | 電子器件質量評定協調體系.分規范.連接起來的撓曲-剛性多層印制電路板 | (Harmonized system of quality assessment for electronic components - Sectional specification - Flex-rigid multilayer printed boards with through connections) |
| BS EN 12365-1-2003 | 建筑五金.門、窗、百葉窗和幕墻用襯墊及擋風雨條.性能要求和分類 | (Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Performance requirements and classification) |
| BS EN 12365-2-2003 | 建筑五金.門、窗、百葉窗和幕墻用襯墊及擋風雨條.線性壓力試驗方法 | (Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Linear compression force test methods) |
| BS EN 12365-3-2003 | 建筑五金.門、窗、百葉窗和幕墻用襯墊及擋風雨條.偏移復原試驗方法 | (Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Deflection recovery test method) |
| BS EN 12365-4-2003 | 建筑五金.門、窗、百葉窗和幕墻用襯墊及擋風雨條.加速老化后復原試驗方法 | (Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Recovery after accelerated ageing test method) |
| BS EN 12368-2000 | 交通控制設備.信號燈頭 | (Traffic control equipment - Signal heads) |
| BS EN 12369-1-2001 | 木質板材.結構設計的特性值.纖維板和碎料板 | (Wood-based panels - Characteristic values for structural design - OSB, particleboards and fireboards) |
| BS EN 12369-2-2004 | 木質板材.結構設計的特性值.膠合板 | |
| BS EN 1237-1995 | 肥料.容積(松)密度測定 | (Fertilizers - Determination of bulk density (tapped)) |
| BS EN 12370-1999 | 天然石料的試驗方法.抗鹽結晶性能的測定 | (Natural stone test methods - Determination of resistance to salt crystallization) |
| BS EN 123700-1997 | 電子件質量評定協調系統.分規范.連接起來的撓曲-剛性雙面印制電路板 | (Harmonized system of quality assessment for electronic components - Sectional specification - Flex-rigid double sided printed boards with through connections) |
| BS EN 12371-2001 | 天然石料試驗方法.抗凍性測定 | (Natural stone test methods - Determination of frost resistance) |
| BS EN 12372-1999 | 天然石料的試驗方法.集中負載下抗彎強度的測定 | (Natural stone test methods - Determination of flexural strength under concentrated load) |
| BS EN 12373-1-2001 | 鋁及鋁合金.陽極氧化.鋁上裝飾和保護用陽極氧化覆層的規定方法 | (Aluminium and aluminium alloys - Anodizing - Method for specifying decorative and protective anodic oxidation coatings on aluminium) |
| BS EN 12373-10-1999 | 鋁和鋁合金.陽極氧化.使用磨損射流設備對陽極氧化涂層主要特殊磨損抗性的測定 | (Aluminium and aluminium alloys - Anodizing - Measurement of mean specific abrasion resistance of anodic oxidation coatings using an abrasive jet test apparatus) |
| BS EN 12373-11-2001 | 鋁和鋁合金.陽極氧化.20°、45°、60°和85°角的陽極氧化覆層的鏡面反射系數和鏡面光澤的測量 | (Aluminium and aluminium alloys - Anodizing - Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 ? 45 ? 60 ? and 85 degrees) |
| BS EN 12373-12-2001 | 鋁和鋁合金.陽極氧化.用集成球形儀器測量鋁表面反射特性 | (Aluminium and aluminium alloys - Anodizing - Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments) |
| BS EN 12373-13-2001 | 鋁和鋁合金.陽極氧化.用角度光度計或濾色角度光度計測量鋁表面反射特性 | (Aluminium and aluminium alloys - Anodizing - Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer) |
| BS EN 12373-14-2001 | 鋁和鋁合金.陽極氧化.陽極氧化涂層鏡相清析的視覺測定.表格刻度法 | (Aluminium and aluminium alloys - Anodizing - Visual determination of image clarity of anodic oxidation coatings - Chart scale method) |
| BS EN 12373-15-2001 | 鋁和鋁合金.陽極氧化.通過變形對陽極氧化涂層耐裂開性的評價 | (Aluminium and aluminium alloys - Anodizing - Assessment of resistance of anodic oxidation coatings to cracking by deformation) |
| BS EN 12373-16-2001 | 鋁及鋁合金.陽極氧化.陽極氧化薄覆層連續性檢查.硫酸銅試驗 | (Aluminium and aluminium alloys - Anodizing - Check for continuity of thin anodic oxidation coatings - Copper sulfate test) |
| BS EN 12373-17-2001 | 鋁及鋁合金.陽極氧化.電介質擊穿潛能的測定 | (Aluminium and aluminium alloys - Anodizing - Determination of electric breakdown potential) |
| BS EN 12373-18-2001 | 鋁及鋁合金.陽極氧化.斑蝕評定的等級系統.圖表法 | (Aluminium and aluminium alloys - Anodizing - Rating system for the evaluation of pitting corrosion - Chart method) |
| BS EN 12373-19-2001 | 鋁及鋁合金.陽極氧化.斑蝕評定的等級系統.坐標法 | Aluminium and aluminium alloys - Anodizing - Rating system for the evaluation of pitting corrosion - Grid method |
| BS EN 12373-2-1999 | 鋁和鋁合金.陽極氧化.陽極氧化涂層單位面積(表面密度)質量的測定.重量劑法 | Aluminium and aluminium alloys - Anodizing - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method |
| BS EN 12373-3-1999 | 鋁和鋁合金.陽極氧化.陽極氧化涂層單位面積(表面密度)質量的測定.用分束顯微鏡的非損測量 | Aluminium and aluminium alloys - Anodizing - Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope |
| BS EN 12373-4-1999 | 鋁和鋁合金.陽極氧化.預先酸處理的染料污點密封試驗的陽極氧化涂層吸收強度損失的評估 | Aluminium and aluminium alloys - Anodizing - Estimation of loss of absorptive power of anodic oxidation coatings after sealing by dye spot test with prior acid treatment |
| BS EN 12373-5-1999 | 鋁和鋁合金.陽極氧化.通過導納測量對密封陽極氧化物涂層質量的評估 | Aluminium and aluminium alloys - Anodizing - Assessment of quality of sealed anodic oxidation coatings by measurement of admittance |
| BS EN 12373-6-1999 | 鋁和鋁合金.陽極氧化.未預先酸處理的浸入磷酸/鉻酸溶液后質量損失測定對密封陽極氧化涂層質量的評估 | (Aluminium and aluminium alloys - Anodizing - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution witho) |
| BS EN 12373-7-1999 | 鋁和鋁合金.陽極氧化.預先酸處理的浸入磷酸/鉻酸溶液后質量損失測定對密封陽極氧化涂層質量的評估 | Aluminium and aluminium alloys - Anodizing - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution with prior acid treatment |
| BS EN 12373-8-1999 | 鋁和鋁合金.陽極氧化.有色陽極氧化涂層對紫外光和熱的比較牢固度的測定 | (Aluminium and aluminium alloys - Anodizing - Determination of the comparative fastness to ultra-violet light and heat of coloured anodic oxidation coatings) |
| BS EN 12373-9-1999 | 鋁和鋁合金.陽極氧化.使用磨損輪磨損試驗設備對陽極氧化涂層磨損指數和磨損抗性的測量 | (Aluminium and aluminium alloys - Anodizing - Measurement of wear resistance and wear index of anodic oxidation coatings using an abrasive wheel wear test apparatus) |
| BS EN 12374-1998 | 包裝.軟管.術語 | (Packaging - Flexible tubes - Terminology) |
| BS EN 12375-1998 | 包裝.軟鋁管.壁厚度的測定方法 | (Packaging - Flexible aluminium tubes - Wall thickness determination method) |
| BS EN 12376-1999 | 體外診斷醫療裝置.使用生物斑漬體外診斷劑發生器提供的信息 | (In vitro diagnostic medical devices - Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology) |
| BS EN 12377-1999 | 包裝材料.軟道.封閉氣密性的試驗方法 | (Packaging - Flexible tubes - Test method for the airtightness of closures) |
| BS EN 1238-1999 | 粘合劑.熱塑性粘合劑軟點測定(環形和球形) | (Adhesives - Determination of the softening point of thermoplastic adhesives (ring and ball)) |
| BS EN 12380-2002 | 排水系統用進氣閥.要求、試驗方法和合格評定 | (Air admittance valves for drainage systems - Requirements, test methods and evaluation of conformity) |
| BS EN 123800-1997 | 電子件質量評定協調系統.分規范.連接起來的柔性多層印制電路板 | (Harmonized system of quality assessment for electronic components - Sectional specification - Flexible multilayer printed boards with through connections) |
| BS EN 12381-2005 | 健康信息學.健康護理特殊問題的時間標準 | |
| BS EN 12384-1999 | 銅和銅合金.帶材彈性彎曲極限值的測定 | (Copper and copper alloys - Determination of spring bending limit on strip) |
| BS EN 12385-1-2002 | 鋼絲繩.安全.一般要求 | (Steel wire ropes - Safety - General requirements) |
| BS EN 12385-10-2004 | 鋼絲繩.安全.一般用途螺旋繩 | |
| BS EN 12385-10-2004 | 鋼絲繩.安全.一般結構物用螺旋繩 | |
| BS EN 12385-2-2003 | 鋼絲繩.安全.定義、命名和分類 | (Steel wire ropes - Safety - Definitions, designation and classification) |
| BS EN 12385-3-2004 | 鋼絲繩.安全.使用和維護信息 | |
| BS EN 12385-4-2002 | 鋼絲繩.安全.一般提升用標準繩索 | Steel wire ropes - Safety - Stranded ropes for general lifting applications |
| BS EN 12385-5-2002 | 鋼絲繩.安全.提升設備用標準繩索 | Steel wire ropes - Safety - Stranded ropes for lifts |
| BS EN 12385-6-2004 | 鋼絲繩.安全.礦井物用股絞繩 | |
| BS EN 12385-7-2002 | 鋼絲繩.安全.礦井用鎖絲鋼絲繩 | Steel wire ropes - Safety - Locked coil ropes for mine shafts |
| BS EN 12385-8-2002 | 鋼絲繩.安全.空中索道設備載人用標準拖拉鋼絲繩 | Steel wire ropes - Safety - Stranded hauling and carrying-hauling ropes for cableway installations designed to carry persons |
| BS EN 12385-9-2002 | 鋼絲繩.安全.空中索道設備載人用鎖絲輸送鋼絲繩 | Steel wire ropes - Safety - Locked coil carrying ropes for cableway installations designed to carry persons |
| BS EN 12386-1999 | 用于人飲用水的化學藥品.硫酸銅 | Chemicals used for treatment of water intended for human consumption - Copper sulfate |
| BS EN 1239-1998 | 膠粘劑.凍結-熔化穩定性 | (Adhesives - Freeze-thaw stability) |
| BS EN 12390-1-2000 | 硬化混凝土試驗.樣品和模型的形狀、尺寸和其它要求 | (Testing hardened concrete - Shape, dimensions and other requirements for specimens and moulds) |
| BS EN 12390-2-2000 | 硬化混凝土試驗.強度試驗用樣品的制備和養護 | Testing hardened concrete - Making and curing specimens for strength tests |
| BS EN 12390-3-2002 | 硬化混凝土試驗.試樣的壓縮強度 | Testing hardened concrete - Compressive strength of test specimens |
| BS EN 12390-4-2000 | 硬化混凝土試驗.壓縮強度.試驗機規范 | (Testing hardened concrete - Compressive strength - Specification for testing machines) |
| BS EN 12390-5-2000 | 硬化混凝土試驗.試樣的彎曲強度 | (Testing hardened concrete - Flexural strength of test specimens) |
| BS EN 12390-6-2000 | 硬化混凝土試驗.試樣的抗拉伸撕裂強度 | (Testing hardened concrete - Tensile splitting strength of test specimens) |
| BS EN 12390-7-2000 | 硬化混凝土試驗.密度 | (Testing hardened concrete - Density of hardened concrete) |
| BS EN 12390-8-2000 | 硬化混凝土試驗.加壓時水的滲透深度 | (Testing hardened concrete - Depth of penetration of water under pressure) |
| BS EN 12391-1-2004 | 煙囪.金屬煙囪用執行標準.非室內封裝加熱設備用煙囪 | |
| BS EN 12391-1-2004 | 煙囪.金屬煙囪用執行標準.非室內封裝加熱設備用煙囪 | |
| BS EN 12392-2000 | 鋁和鋁合金.鍛壓產品.用于生產壓力設備的產品的特殊要求 | (Aluminium and aluminium alloys - Wrought products - Special requirements for products intended for the production of pressure equipment) |
| BS EN 12393-1-1999 | 清淡食品.農藥殘留物氣相色譜測定用多種殘留法.第1部分:概述 | (Non-fatty foods - Multiresidue methods for the gas chromatographic determination of pesticide residues - General considerations) |
| BS EN 12393-2-1999 | 清淡食品.農藥殘留物氣相色譜測定用多種殘留法.第2部分:萃取和凈化的方法 | Non-fatty foods - Multiresidue methods for the gas chromatographic determination of pesticide residues - Methods for extraction and clean-up |
| BS EN 12393-3-1999 | 清淡食品.農藥殘留物氣相色譜測定用多種殘留法.第2部分:測定和確定試驗 | Non-fatty foods - Multiresidue methods for the gas chromatographic determination of pesticide residues - Determination and confirmatory tests |
| BS EN 12396-1-1999 | 清淡食品.二硫化基甲酸鹽和二硫化四烷基秋蘭姆殘留物的測定.第1部分:分光光度法 | (Non-fatty foods - Determination of dithiocarbamate and thiuram disulfide residues - Spectrometric method) |
| BS EN 12396-2-1999 | 清淡食品.二硫化基甲酸鹽和二硫化四烷基秋蘭姆殘留物的測定.第2部分:色相氣譜法 | Non-fatty foods - Determination of dithiocarbamate and thiuram disulfide residues - Gas chromatographic method |
| BS EN 12396-3-2000 | 清淡食品.二硫化基甲酸鹽和二硫化四烷基秋蘭姆殘留物的測定.紫外分光光度黃酸鹽法 | Non-fatty foods - Determination of dithiocarbamate and thiuram disulfide residues - UV spectrometric xanthogenate method |
| BS EN 12397-2004 | 載人用索道裝置的安全要求.操作 | |
| BS EN 124-1994 | 車輛和行人通過區域的排水溝蓋和人孔蓋.設計要求、型號試驗、標志 | Gully tops and manhole tops for vehicular and pedestrian areas - Design requirements, type testing, marking, quality control |
| BS EN 1240-1998 | 膠粘劑.羥基值和/或羥基含量的測定 | Adhesives - Determination of hydroxyl value and/or hydroxyl content |
| BS EN 12400-2002 | 窗和人行門.機械耐久性.要求和分類 | Windows and pedestrian doors - Mechanical durability - Requirements and classification |
| BS EN 12402-1999 | 鉛和鉛合金.分析用取樣的方法 | Lead and lead alloys - Methods of sampling for analysis |
| BS EN 12405-2002 | 煤氣表.氣體體積電子計數裝置 | Gas meters - Gas-volume electronic conversion devices |
| BS EN 12406-1999 | 交換容器.C級熱交換容器.尺寸和一般要求 | Swap bodies - Thermal swap bodies of class C. Dimensions and general requirements |
| BS EN 12407-2000 | 天然石試驗方法.巖相檢驗 | Natural stone test methods - Petrographic examination |
| BS EN 12408-2004 | 載人用索道裝置的安全要求.質量控制 | |
| BS EN 12409-1999 | 橡膠和塑料機械.熱成形機.安全要求 | Rubber and plastics machines - Thermoforming machines - Safety requirements |
| BS EN 1241-1998 | 膠粘劑.酸值測定 | Adhesives - Determination of acid value |
| BS EN 12410-1999 | 交換容器.A級熱交換容器.尺寸和一般要求 | Swap bodies - Thermal swap bodies of class A. Dimensions and general requirements |
| BS EN 12412-2-2003 | 窗、門和百葉窗的熱性能.用隔熱箱法測定熱傳遞.框 | (Thermal performance of windows, doors and shutters - Determination of thermal transmittance by hot box method - Frames) |
| BS EN 12412-4-2003 | 窗、門和百葉窗的熱性能.用隔熱箱法測定熱傳遞.卷升百葉箱 | (Thermal performance of windows, doors and shutters - Determination of thermal transmittance by hot box method - Roller shutter boxes) |
| BS EN 12413-1999 | 粘合磨料制品的安全要求 | (Safety requirements for bonded abrasive products) |
| BS EN 12414-1999 | 車輛停泊控制設備.付款和出票機器.技術和功能要求 | Vehicle parking control equipment - Pay and display ticket machine - Technical and functional requirements |
| BS EN 12415-2001 | 機床的安全.小型數控車床和車床頂尖 | (Safety of machine tools - Small numerically controlled turning machines and turning centres) |
| BS EN 12416-1-2001 | 固定滅火系統.粉末系統.件的要求和試驗方法 | Fixed firefighting systems - Powder systems - Requiremments and test methods for components |
| BS EN 12416-2-2001 | 固定滅火系統.粉末系統.設計,構造和維修 | Fixed firefighting systems - Powder systems - Design, construction and maintenance |
| BS EN 12417-2001 | 機床.安全.組合加工中心機床 | (Machine tools - Safety - Machining centres) |
| BS EN 12418-2000 | 施工現場用磚石和石材切斷機.安全性 | (Masonry and stone cutting-off machines for job site - Safety) |
| BS EN 12419-1999 | 呼吸保護設備.帶全面罩、半面罩或四分之一面罩的輕型壓縮氣體管路呼吸裝置.要求、試驗、標記 | (Respiratory protective devices - Light duty construction compressed airline breathing apparatus incorporating a full face mask, half mask or quarter mask - Requirements, testing, marking) |
| BS EN 1242-1998 | 膠粘劑.異氰酸酯含量測定 | Adhesives - Determination of isocyanate content |
| BS EN 12420-1999 | 銅和銅合金.鍛件 | Copper and copper alloys - Forgings |
| BS EN 12421-1998 | 鎂及鎂合金.非合金鎂 | Magnesium and magnesium alloys - Unalloyed magnesium |
| BS EN 12422-1999 | 劍麻捆扎繩 | (Sisal twines) |
| BS EN 12423-1999 | 聚丙烯捆扎繩 | (Polypropylene twines) |
| BS EN 12424-2000 | 工業、商業和汽車用庫門.抗風荷載特性.分類 | (Industrial, commercial and garage doors and gates - Resistance to wind load - Classification) |
| BS EN 12425-2000 | 工業、商業和汽車用門.耐水滲透特性.分類 | (Industrial, commercial and garage doors and gates - Resistance to water penetration - Classification) |
| BS EN 12426-2000 | 工業、商業和汽車用門.透氣率.分類 | (Industrial, commercial and garage doors and gates - Air permeability - Classification) |
| BS EN 12427-2000 | 工業、商業和汽車用門.透氣率.試驗方法 | (Industrial, commercial and garage doors and gates - Air permeability - Test method) |
| BS EN 12428-2000 | 工業、商業和汽車用門.熱傳遞吸水.計算要求 | (Industrial, commercial and garage doors and gates - Thermal transmittance - Requirements for the calculation) |
| BS EN 12429-1998 | 建筑設施用熱絕緣產品.規定溫度和濕度條件下潮氣平衡的調節 | (Thermal insulating products for building applications - Conditioning to moisture equilibrium under specified temperature and humidity conditions) |
| BS EN 1243-1999 | 膠粘劑.氨基和氨基甲醛冷凝劑中自由甲醛的測定 | (Adhesives - Determination of free formaldehyde in amino and amidoformaldehyde condensates) |
| BS EN 12430-1998 | 建筑應用的熱絕緣產品.零負載下行為的測定 | (Thermal insulating products for building applications - Determination of behaviour under point load) |
| BS EN 12431-1998 | 建筑應用的熱絕緣產品.架空地板絕緣產品厚度的測定 | (Thermal insulating products for building applications - Determination of thickness for floating floor insulating products) |
| BS EN 12432-1998 | 體操器材.平衡木.功能和安全要求.試驗方法 | (Gymnastic equipment - Balancing beams - Functional and safety requirements, test methods) |
| BS EN 12433-1-2000 | 工業、商業和車庫用門.術語.門的類型 | (Industrial, commercial, and garage doors and gates - Terminology - Types of doors) |
Copyright ? 2008 Worldwide Translation.
寬天下翻譯公司版權所有.Tel:010-83345348
