    
|
相關查詢：
| 編號 | 中文名稱 | 英文名稱 |
| ANSI (NFPA)T 2.25.1 R 2-2005 | 氣壓傳動.工業機械的系統標準.對ISO 4414-1998的補充.氣壓傳動.與系統相關的一般規則 | |
| ANSI 1-1990 | 小型鍋爐的測試程序 | Mini-Rail Boiler Testing Procedure |
| ANSI 13-1988 | 盒式錄像磁帶.2英寸四路磁帶(SMPTE) | Video Recording-Cartridge Spools - 2-in Quadruplex Tape (SMPTE) |
| ANSI 5609-2004 | 可轉位刀片用鏜桿.尺寸 | |
| ANSI 5609-2004 | 可轉位刀片用鏜桿.尺寸 | (Boring bars for indexable inserts - Dimensions ) |
| ANSI A 10.12-1998 | 挖掘的安全要求 | Safety Requirements for Excavation |
| ANSI A 10.13-2001 | 鋼結構構件的安全要求 | Safety Requirements for Steel Erection |
| ANSI A 10.15-1995 | 建造和拆除操作.挖溝的安全要求 | Construction and Demolition Operations - Dredging, Safety Requirements for |
| ANSI A 10.16-1995 | 建造和拆除操作.豎井,隧道,藻井的安全要求 | Construction and Demolition Operations - Safety Requirements for Tunnels, Shafts, and Caissons |
| ANSI A 10.17-1997 | 熱混合瀝青建筑的安全操作規程 | Safe Operating Practices for Hot Mix Asphalt (HMA) Construction |
| ANSI A 10.18-1996 | 建造和拆除操作.臨時地板孔墻開孔和樓梯口及其他無保護邊界的安全要求 | Construction and Demolition Operations - Safety Requirements for Temporary Floor Holes, Wall Openings, Stairways and Other Unprotected Edges |
| ANSI A 10.31-1995 | 建造和拆除操作.挖掘起重機的安全要求,定義和規范 | Construction and Demolition Operations - Safety Requirements, Definitions, and Specifications for Digger Derricks |
| ANSI A 10.34-2001 | 施工現場及其鄰近的公眾的保護 | Protection of the Public on and Adjacent to Construction Sites |
| ANSI A 10.37-1996 | 建造和拆除操作.在建造和拆除操作中的砂礫系統 | Construction and Demolition Operations - Debris Net Systems Used During Construction and Demolition Operations |
| ANSI A 10.39-1996 | 健康審核程序的結構安全 | Construction Safety and Health Audit Program |
| ANSI A 10.42-2000 | 建筑企業的施工資格和責任 | Rigging Qualifications and Responsibilities in the Construction Industry |
| ANSI A 10.7-1998 | 建造和拆除.商業用爆炸和炸藥.運輸,儲存,處理和使用的安全要求 | Construction and Demolition - Commercial Explosives and Blasting Agents - Safety Requirements for Transportation, Storage, Handling and Use |
| ANSI A 10.9-1997 | 建造和拆除操作.混凝土和磚石工程 | Construction and Demolition Operations - Concrete and Masonry Work |
| ANSI A 108.10-1992 | 灰漿固定規范 | Specifications for Installation of Grout in Tilework (included in ANSI A108.1-1992) |
| ANSI A 108.11-1992 | 粘結性襯墊部件的內部裝修規范 | Specifications for Inior Installations of Cementitious Backer Units (included in ANSI A108.1-1992) |
| ANSI A 108.1a-1992 | 用波特蘭水泥灰漿用濕固定法安裝陶瓷磚的規范 | Specifications for Installation of Ceramic Tile in the Wet-Set Method, with Portland Cement Mortar (included in ANSI A108.1-1992) |
| ANSI A 108.1b-1992 | 用干的或漬漿的波特蘭水泥灰漿在彎曲的波特蘭水泥灰漿凝固床上安裝陶瓷磚的規范 | Specifications for Installation of Ceramic Tile on a Cured Portland Cement Mortar Setting Bed with Dry-Set or Latex Portland Cement Mortar (included in ANSI A108.1-1992) |
| ANSI A 108.1c-1992 | 簽訂合同者的選擇規范.用干的或漬漿的波特蘭水泥灰漿在彎曲的波特蘭水泥灰漿床上安裝陶瓷磚或用波特蘭混凝土灰漿用濕固定方法安裝陶瓷磚 | |
| ANSI A 108.4-1992 | 用有機粘結劑或水可清洗的環氧樹脂陶瓷磚粘結劑的陶瓷磚的安裝規范 | Specifications for Installation of Ceramic Tile with Organic Adhesives or Water Cleanable Tile Setting Epoxy Adhesive (included in ANSI A108.1-1992) |
| ANSI A 108.5-1992 | 用干固定的波特蘭水泥灰漿或漬漿的波特蘭水泥灰漿的陶瓷磚的安裝規范 | Specifications for Installation of Ceramic Tile with Dry-Set Portland Cement Mortar or Latex Portland Cement Mortar (included in ANSI A108.1-1992) |
| ANSI A 108.6-1992 | 用耐化學藥品的水可清洗釉面磚粘結的和環氧樹脂的陶瓷磁磚安裝規范 | Specifications for Installation of Ceramic Tile with Tile with Chemical Resistant, Water Cleanable Tile Setting and Grouting Epoxy (included in ANSI A108.1-1992) |
| ANSI A 108.8-1992 | 用耐化學藥品的灰漿和灌漿安裝陶瓷磚的規范 | Specifications for Installation of Ceramic Tile with Chemical Resistant Furan Mortar and Grout (included in ANSI A108.1-1992) |
| ANSI A 108.9-1992 | 用改良的樹脂乳化的灰漿和灌漿的陶瓷磚的安裝規范 | Specifications for Installation of Ceramic Tile with Modified Epoxy Emulsion Mortar/Grout (included in ANSI A108.1-1992) |
| ANSI A 118.1-1992 | 干固定的波特蘭水泥灰漿規范 | Specifications for Dry-Set Portland Cement Mortar (included in ANSI A108.1-1992) |
| ANSI A 118.2-1992 | 導電的干固定的波特蘭水泥灰漿規范 | Specifications for Conductive Dry-Set Portland Cement Mortar (included in ANSI A108.1-1992) |
| ANSI A 118.3-1992 | 耐化學藥品的水可清洗的磁磚安裝和灌漿環氧樹脂和水可清洗的固定磁磚粘結劑規范 | Specifications for Chemical Resistant, Water Cleanable Tile-Setting and Grouting Epoxy and Water Cleanable Tile Setting Epoxy Adhesive (included in ANSI A108.1-1992) |
| ANSI A 118.4-1992 | 浸漿波特蘭水泥灰漿規范 | Specifications for Latex Portland Cement Mortar (included in ANSI A108.1-1992) |
| ANSI A 118.5-1992 | 磁磚安裝用耐化學藥品的樹脂灰漿規范 | Specifications for Chemical Resistant Furan Resin Mortars and Grouts for Tile Installation (included in ANSI A108.1-1992) |
| ANSI A 118.6-1992 | 陶瓷磚灌漿規范 | Specifications for Ceramic Tile Grouts (included in ANSI A108.1-1992) |
| ANSI A 118.8-1992 | 改良環氧樹脂乳化灰漿灌漿規范 | Specifications for Modified Epoxy Emulsion Mortar Grout (included in ANSI A108.1-1992) |
| ANSI A 118.9-1992 | 粘結性襯墊部件的規范 | Specifications for Cementitious Backer Units (included in ANSI A108.1-1992) |
| ANSI A 119.2-1996 | 娛樂車輛 | Recreational Vehicles |
| ANSI A 119.4-1996 | 娛樂車輛的停車和停放場地 | Recreational Vehicle Parks and Campgrounds |
| ANSI A 119.5-1998 | 停車拖車 | Park Trailers |
| ANSI A 1264.2-2001 | 行走/工作表面的耐滑性裝置 | Provision of Slip Resistance on Walking/Working Surfaces |
| ANSI A 136.1-1992 | 陶瓷磚安裝用有機粘結劑規范 | Organic Adhesives for Installation of Ceramic Tile (included in ANSI A108.1-1992) |
| ANSI A 250.11-2001 | 推薦的鋼機架建造方法 | Recommended Erection Instructions for Steel Frames |
| ANSI A 250.6-1997 | 標準鋼門五金 | Hardware on Standard Steel Doors (Reinforcement-Application) |
| ANSI A 250.7-1997 | 鋼門和鋼門框架的命名 | Nomenclature for Steel Doors and Steel Door Frames |
| ANSI A 92.2-2001 | 車載高架旋轉架空裝置 | Vehicle-Mounted Elevating and Rotating Aerial Devices |
| ANSI A10.10-1990 | 建筑業用的臨時及便攜式采暖器件和設備的安全要求 | Safety requirements for temporary and portable space heating devices and equipment used in the construction industry |
| ANSI A10.11-1989 | 修建和拆除工作期間用的安全網 | Construction and Demolition Operations - Personnel and Debris Nets |
| ANSI A10.14-1991 | 供建筑和拆除工作用安全帶、裝具、繩索、救生索的要求 | Construction and demolition operations - Requirements for safety belts, harnesses, lanyards and lifelines for constrution and demolition use |
| ANSI A10.20-1988 | 修建和拆除的瓷磚、水磨石和大理石作業時的安全要求 | Construction and Demolition - Ceramic Tile, Terrazzo and Marble Work - Safety Requirements |
| ANSI A10.28-1990 | 懸吊在起重機或轉臂起重機上的工作平臺安全要求 | Safety requirements for work platforms suspended from cranes or derricks for construction and demolition operations |
| ANSI A10.3-1995 | 修建和拆除工作中用的炸藥驅動緊固系統的安全要求 | Construction and demolition operations - Safety requirements for powder-actuated fastening systems |
| ANSI A10.32-2004 | 建設和拆毀工作中防人員跌落的安全要求 | |
| ANSI A10.33-1992 | 多個建筑和拆除工程中的安全、衛生方面的要求 | Construction and demolition operations - Safety and health programm - Requirements for multi-employer projects |
| ANSI A10.4-2004 | 載人升降機和雇員用電梯的安全要求 | |
| ANSI A10.5-1992 | 運料用升降機的安全要求 | Safety requirements for material hoists |
| ANSI A10.6-1990 | 拆除工程的安全要求 | Safety requirements for demolition operations |
| ANSI A10.8-1988 | 修建和拆除工作用的腳手架的安全要求 | Construction and Demolition Operations - Scaffolding - Safety Requirements |
| ANSI A108.1 Reihe-1992 | 瓷磚鋪設的規范 | Specifications for the installation of ceramic tile |
| ANSI A112.14.1-1975 | 回水閥 | Backwater valves |
| ANSI A112.19.5-1979 | 廁所水浮筒、水箱及小便池的修整 | Trim for water-closet bowls, tanks, and urinals (dimensional standards) |
| ANSI A118.10-1993 | 薄狀瓷磚和規格石料安裝中的載面、粘接、防水層 | Load bearing, bonded, waterproof membranes for thin-set ceramic tile and dimension stone installations |
| ANSI A119.2-2002 | 娛樂車輛 | (Recreational Vehicles ) |
| ANSI A119.5-2005 | 公園掛車 | |
| ANSI A1264.1-1995 | 樓板、墻壁開口及非居住區的樓梯、圍欄類的安全要求 | Safety requirements for workplace floor and wall openings, stairs and railing systems |
| ANSI A135.4-2004 | 基本的硬質纖維板 | |
| ANSI A135.5-2004 | 預制硬質纖維板嵌板 | |
| ANSI A14.3-1992 | 固定式梯子的安全要求 | Ladders - Fixed - Safety requirements |
| ANSI A14.3-2002 | 固定梯子的安全要求 | (Ladders - Fixed - Safety Requirements ) |
| ANSI A14.4-1992 | 工地用木梯的安全要求 | Safety Requirements for Job-Made Wooden Ladders |
| ANSI A14.9-2004 | 吊裝暗式爬高系統的安全要求 | |
| ANSI A161.2-1979 | 高壓層壓案臺板的性能標準 | Performance standards for fabricated high pressure decorative laminate countertops |
| ANSI A208.2-1994 | 室內用中密度纖維板 | Medium density fiberboard (MDF) |
| ANSI A224.1-1990 | 鋼門和門框涂底漆前的鋼板表面的試驗程序和驗收條件 | Test procedure and acceptance criteria for prime painted steel surfaces for steel doors and frames |
| ANSI A250.13-2003 | 擺動式門組件用防大風暴部件的檢驗和額定值 | (Testing and Rating of Severe Windstorm Resistant Components for Swinging Door Assemblies ) |
| ANSI A250.2-1984 | 隔熱鋼門系統的術語 | Nomenclature for insulated steel door systems |
| ANSI A250.4-1994 | 鋼門和金屬附件的耐久性的試驗程序和驗收標準 | Test procedure and acceptance criteria for physical endurance for steel doors and hardware reinforcings |
| ANSI A250.5-1994 | 鋼門、門框和吊鉤的加速物理耐久性試驗程序 | Accelerated physical endurance test procedure for steel doors, frames and frame anchors |
| ANSI A250.6-2003 | 標準鋼制門五金件(增強型) | (Hardware on Standard Steel Doors (Reinforcement-Application) ) |
| ANSI A250.8-2003 | 標準鋼門和門框的推薦性規范 | (Recommended Specifications for Standard Steel Doors and Frames ) |
| ANSI A300 Part 2-2004 | 樹木護理操作.樹木、灌木和其它木類植物的維護.標準規程.第2部分:施肥 | |
| ANSI A300 Part 4-2002 | 樹木管理培植.樹、灌木和其他樹木維護.樹的防電擊設備 | (Tree Care Operations - Tree, Shrub and Other Woody Plant Maintenance: Standard Practices - Part 4 - Lightning Protection Installation for Trees ) |
| ANSI A300 Part 5-2005 | 樹木護理操作.喬木、灌木和其他木類植物的養護.標準操作規程(場地規劃、開發和施工操作過程中對喬木和灌木的管理) | |
| ANSI A300 Part 6-2005 | 樹木維護用操作.喬木、灌木和其他木本植物的維護.標準實施規程(移栽) | |
| ANSI A300-1995 | 樹木防護.樹、灌木和其它木本植物的防護.標準規程 | Tree care operations - Tree, shrub and other woody plant maintenance - Standard practices |
| ANSI ATIS0100001-2004 | ETS用戶平面安全指南和要求 | |
| ANSI ATIS0152100-2005 | 與ITU-T建議G.711一起使用的包丟失隱蔽 | |
| ANSI ATIS0300002-2005 | POTS服務試驗用XML圖解界面 | |
| ANSI ATIS0300003-2005 | 缺陷管理用XML圖解界面(故障管理) | |
| ANSI ATIS0300202.a-2005 | 互連網操作.闡明5.3節呼叫優先策略的災害狀況下公共通信網絡的網絡管理指南 | |
| ANSI ATIS0300276.a-2005 | 操作、管理、維護和保障.公共通信網絡的安全要求:作為阻止有害通信的包過濾附加要求的管理平面用安全要求基線 | |
| ANSI ATIS0322000-2005 | 信息交換用通信業制造商、供應商和相關服務公司的表示 | |
| ANSI ATIS0325300-2005 | 信息交換用定位實體的識別 | |
| ANSI ATIS0326600-2005 | 電信.信息交換.用于北美電信系統的電信電路的識別用結構 | |
| ANSI ATIS0326900-2005 | 電信.信息交換.用于北美電信系統的追蹤信息格式的結構和表示 | |
| ANSI ATIS0610700a-2005 | 數字分級.格式規范(虛擬連接和LCAS) | |
| ANSI ATIS0700004-2005 | 大容量-空分多路存取(HC-SDMA) | |
| ANSI ATIS1000006-2005 | 信令系統No.7(SS7).應急電信服務(ETS) | |
| ANSI ATIS1000111-2005 | 信令系統No.7(SS7).信息傳輸部分(MTP) | |
| ANSI ATIS1000112-2005 | 信令系統No.7(SS7).信令連接控制部分(SCCP) | |
| ANSI ATIS1000113-2005 | 信令系統No.7(SS7).綜合業務數字網絡(ISDN)用戶部分 | |
| ANSI ATIS1000631-2005 | 信令系統No.7(SS7).高完成概率(HPC)網絡容量 | |
| ANSI B 11.3-2002 | 動力彎板機.制造、維修和使用安全要求 | Power Press Brakes, Safety Requirements for the Construction, Care, and Use of |
| ANSI B 16.18-2001 | 鑄銅合金釬料接頭壓力配件 | Cast Copper Alloy Solder Joint Pressure Fittings |
| ANSI B 18.16.3M-1982 | 普通轉矩式米制六角螺母和六角法蘭螺母的尺寸要求 | Nuts and Hex Flange Nuts, Dimensional Requirements for Prevailing-Torque-Type Steel Metric Hex |
| ANSI B 5.11-1964 | 多軸鉆頭用軸頭和可調接頭 | Spindle Noses and Adjustable Adapters for Multiple Spindle Drilling Heads |
| ANSI B 5.43-1977 | 組合機床標準 | Modular Machine Tool Standards |
| ANSI B 65.1-1995 | 安全標準.印刷機系統 | Safety Standard - Printing Press Systems |
| ANSI B 74.16-1995 | 檢驗金剛石磨料粒度的尺寸 | Checking the Size of Diamond Abrasive Grain |
| ANSI B 74.18-1996 | 涂有磨料的某種磨料粒度的等級 | Grading of Certain Abrasive Grain on Coated Abrasive Material |
| ANSI B 74.23-1999 | 鉆石立方體的硼氮磨料的相對晶體強度的測量 | Measuring the Relative Crystal Strengths of a Diamond Cubic Boron Nitride Grits |
| ANSI B 92.1-1996 | 漸開線花鍵及其檢驗.英制 | Involute Splines and Inspection, Inch Version |
| ANSI B 93.10M-1969 | 方頭液動滾筒的靜壓力額定值法 | Static Pressure Rating Methods of Square Head Fluid Power Cylinders |
| ANSI B 93.35M-1978 | 液動專用裝置的空腔尺寸(英制) | Fluid Power Exclusion Devices (Inch Series), Cavity Dimensions for |
| ANSI B 93.36M-1973 | 浮動式金屬和非金屬液壓活塞環槽的尺寸 | Floating Type Metallic and Non-Metallic Fluid Power Piston Rings, Groove Dimensions for |
| ANSI B 94.3-1965 | 車床和螺旋機械的直的切削片 | Straight Cut-Off Blades for Lathes and Screw Machines |
| ANSI B 94.8-1967 | 插入式刀形銑刀體 | Inserted Blade Milling Cutter Bodies |
| ANSI B11 TR 1-1993 | 機床的設計、安裝和使用的人機工程導則 | Ergonomic guidelines for the design, installation and use of machine tools |
| ANSI B11.1-1988 | 機床.機械動力壓力機的制造、維護和使用的安全要求 | Machine Tools - Mechanical Power Presses - Safety Requirements for Construction, Care and Use |
| ANSI B11.10-1990 | 機床.金屬鋸床的制造、維護和使用的安全要求 | Machine Tools - Metal Sawing Machines - Safety Requirements for Construction, Care and Use |
| ANSI B11.10-2003 | 金屬鋸床的制造、維護和使用的安全要求 | (Metal Sawing Machines, Safety Requirements for Construction, Care, and Use of ) |
Copyright ? 2008 Worldwide Translation.
寬天下翻譯公司版權所有.Tel:010-83345348
? 相關文章
成功案例：
服務語言:
英語翻譯 | 西班牙語翻譯 | 法語翻譯 | 意大利語翻譯 | 韓語翻譯 | 葡萄牙語翻譯 | 德語翻譯 | 日語翻譯
技術標準翻譯
