    
|
相關查詢：
| 編號 | 中文名稱 | 英文名稱 |
| )Standard Specification for HFC-125 (Pentafluoroethane, C2HF5) | HF | )Standard Specification for HFC-125 (Pentafluoroethane, C2HF5)> |
| 0-1-2001傘齒輪負載容量的計算.說明及一般影響因素Calculation of load capacity of bevel gears - Calculation of load capacity of bevel gears - Introduction and general influence factors> | 0-1-2001傘齒輪負載容量的計算.說明及一般影響因素Calculation of load capacity of bevel gears - Calculation of load capacity of bevel gears - Introduction and general influence factors> | 1030 |
| 3-203-1996工業自動化系統和集成電路.產品數據表示和信息交流.第203部分:利用協議:性位控制設計Industrial automation systems and integration - Product data representation and exchange - Application protocol - Configuration controlled design> | 3-203-1996工業自動化系統和集成電路.產品數據表示和信息交流.第203部分:利用協議:性位控制設計Industrial automation systems and integration - Product data representation and exchange - Application protocol - Configuration controlled design> | 1030 |
| 3-31-1995工業自動化系統及集成.產品數據表示和交換.一致性試驗的方法論和基本結構:一般概念I(lǐng)ndustrial automation systems and integration - Product data representation and exchange - Conformance testing methodology and framework: general concepts> | 3-31-1995工業自動化系統及集成.產品數據表示和交換.一致性試驗的方法論和基本結構:一般概念I(lǐng)ndustrial automation systems and integration - Product data representation and exchange - Conformance testing methodology and framework: general concepts> | 1030 |
| 3-32-1998工業自動化系統和集成電路.產品數據表示和交換.一致性測試方法和結構:實驗室和試驗人員的要求Industrial automation systems and integration - Product data representation and exchange - Conformance testing methodology and framework: Requirements on testi | 3-32-1998工業自動化系統和集成電路.產品數據表示和交換.一致性測試方法和結構:實驗室和試驗人員的要求Industrial automation systems and integration - Product data representation and exchange - Conformance testing methodology and framework: Requirements on testing laboratories and clients> | 1030 |
| 3-44-1995工業自動化系統和集成.產品數據表示和信息交流.集成總資源:產品結構配置Industrial automation systems and integration - Product data representation and exchange - Integrated generic resources: Product structure configuration> | 3-44-1995工業自動化系統和集成.產品數據表示和信息交流.集成總資源:產品結構配置Industrial automation systems and integration - Product data representation and exchange - Integrated generic resources: Product structure configuration> | 1030 |
| ANSI (NFPA)T 2.25.1 R 2-2005 | 氣壓傳動.工業機械的系統標準.對ISO 4414-1998的補充.氣壓傳動.與系統相關的一般規則 | |
| ANSI Z223.1/NFPA 54-2005 | 國家燃?xì)庖?guī)程(同ANSI/NFPA 54) | |
| ANSI/(NFPA) T 2.12.1-1993 | 液力傳動.系統和產品.測量平均穩定狀態壓力的方法 | Hydraulic Fluid Power - Systems and Products - Method of Measuring Average Steady-State Pressure |
| ANSI/(NFPA) T 2.12.10-1993 | 液力傳動.系統和產品.常規測量,原理和公差 | Hydraulic Fluid Power - Systems and Products - Testing General Measurement, Principles, and Tolerances |
| ANSI/(NFPA) T 2.13.1 R3-1998 | 工業液力傳動系統耐火液體的使用規程 | Use of Fire-Resistant Fluids for Industrial Hydraulic Fluid Power Systems, Practice for the |
| ANSI/(NFPA) T 2.13.4-1994 | 信息報告.液壓用液體的保存,維護和處置推薦規程 | Information Report - Recommendations for Conservation, Maintenance, and Disposal of Hydraulic Fluids |
| ANSI/(NFPA) T 2.13.5-1991 | 液力傳動.工業系統.高水含量液體的操作規程 | Hydraulic Fluid Power - Industrial Systems - Practice for the Use of High Water Content Fluids |
| ANSI/(NFPA) T 2.13.7 R1-1997 | 液力傳動.石油流體.總體調節 | Hydraulic Fluid Power - Petroleum Fluids - Prediction of Bulk Moduli |
| ANSI/(NFPA) T 2.13.8-1997 | 液力傳動.耐火液體.定義,分類和試驗 | Hydraulic Fluid Power - Fire Resistant Fluids - Definitions, Classifications, and Testing |
| ANSI/(NFPA) T 2.24.2-1997 | 液壓動力系統.提高密封可信度的方法 | Hydraulic Fluid Power Systems - Methods to Improve Sealing Reliability |
| ANSI/(NFPA) T 2.30.1-1994 | 液壓動力感應器選擇的指南 | Guide for Selection of Fluid Power Pressure Transducers |
| ANSI/(NFPA) T 2.6.1 R2-2000 | 液動件.NFPA/T 2.6.1 R2-2000補充件:液動件壓力額定值.檢驗疲勞和確定含金屬外殼的液動件的壓力的碎裂壓力額定值的方法 | Fluid Power Components - Method for Verifying the Fatigue and Establishing the Burst Pressure Ratings of the Pressure Containing Envelope of a Metal Fluid Power Component |
| ANSI/(NFPA) T 2.9.11-1989 | 液力傳動.系統中油樣品顆粒含量的測定方法 | Hydraulic Fluid Power-Method of Determining the Particulate Count of an Oil Sample from a System (Using Liquid Automatic Counters) |
| ANSI/(NFPA) T 2.9.14-1993 | 液力傳動.液體污染.重力計方法對固體污染水平的測定 | Hydraulic Fluid Power - Fluid Contamination - Determination of Solid Contaminant Level by the Gravimetric Method |
| ANSI/(NFPA) T 3.10.17-1995 | 有限壽命液體過濾壓力/壽命比.檢驗壓力過濾器受壓力外殼的疲勞壽命比率和破損壓力比率的方法 | Finite Life Hydraulic Filter Pressure/Life Rating - Method for Verifying the Fatigue Life Rating and the Burst Pressure Rating of the Pressure Containing Envelope of a Spin-On Hydraulic Filter |
| ANSI/(NFPA) T 3.10.4 R1-1991 | 液力傳動.過濾器和分離器.圖形符號補充 | Hydraulic Fluid Power - Filters and Separators - Graphic Symbols Supplement |
| ANSI/(NFPA) T 3.10.5.1 R2-2000 | 液壓過濾器/分離器外殼.NFPA/T 2.6.1 R2-2000補充件:液動件壓力額定值.檢驗疲勞和確定含金屬外殼的液動過濾器/分離器的壓力的碎裂壓力額定值的方法 | |
| ANSI/(NFPA) T 3.12.10 R2-2000 | 空氣管路過濾器、調節器和/或潤滑器.NFPA/T 2.6.1 R2-2000補充件:液動件壓力額定值.檢驗疲勞和確定含金屬外殼的液動過濾器、調節器和/或潤滑器的壓力的碎裂壓力額定值的方法 | |
| ANSI/(NFPA) T 3.12.3 R2-1991 | 氣壓液動.壓力調節器.工業類型 | Pneumatic Fluid Power - Pressure Regulator - Industrial Type |
| ANSI/(NFPA) T 3.16.2 R1-1997 | 液力傳動.非整體工業貯液器的設計 | Hydraulic Fluid Power - Design for Nonintegral Industrial Reservoirs |
| ANSI/(NFPA) T 3.16.3 R1-1997 | 液力傳動.非整體工業動力件的要求 | Hydraulic Fluid Power - Requirements for Nonintegral Industrial Power Units |
| ANSI/(NFPA) T 3.19.25-1998 | 信息報告.液動系統.密封裝置.彈性密封體和排除裝置的儲存,處理和安裝 | Information Report - Fluid Power Systems - Sealing Devices - Storage, Handling, and Installation of Elastomeric Seals and Exclusion Devices |
| ANSI/(NFPA) T 3.19.32-1992 | 旋轉軸蓋型密封件.第2部分:詞匯 | Rotary Shaft Lip Type Seals - Part 2: Vocabulary |
| ANSI/(NFPA) T 3.20.14-1990 | 氣動快速反應耦合.塞尺寸 | Pneumatic Quick-Action Couplings - Plug Dimensions |
| ANSI/(NFPA) T 3.20.15-1991 | 液力傳動.快速反應耦合.急流面 | Hydraulic Fluid Power - Quick-Action Coupling - Flush Face Type |
| ANSI/(NFPA) T 3.20.8 R2-2000 | 速動連接件.NFPA/T 2.6.1 R2-2000補充件:液動件壓力額定值.檢驗疲勞和確定含金屬外殼的液動速動連接件的壓力的碎裂壓力額定值的方法 | |
| ANSI/(NFPA) T 3.21.16-1997 | 氣壓液動.氣動產品的通信和標簽 | Pneumatic Fluid Power - Labeling and Communication of Pneumatic Products |
| ANSI/(NFPA) T 3.21.3-1990 | 氣壓液動.固定件的流動率試驗過程和報告方法. | Pneumatic Fluid Power - Flow Rating Test Procedure and Reporting Method - for Fixed Orifice Components |
| ANSI/(NFPA) T 3.21.4 R2-2000 | 氣動閥.NFPA/T 2.6.1 R2-2000補充件:液動件壓力額定值.檢驗疲勞和確定含金屬外殼的液動氣動閥的壓力的碎裂壓力額定值的方法 | Pneumatic valve - Pressure rating supplement to NFPA/T2.6.1 R2-2000, Fluid power components - Method for verifying the fatigue and establishing the burst pressure ratings of the pressure containing envelope of a metal fluid power pneumatic valve |
| ANSI/(NFPA) T 3.21.8-1990 | 氣壓液動.反應時間的測量.直接控制閥門 | Pneumatic Fluid Power - Measurement of Response Time - Directional Control Valves |
| ANSI/(NFPA) T 3.28.9 R1-1989 | 液壓動力系統和產品.移動部件流動控制.圖解方法 | Fluid Power Systems and Products - Moving Parts Fluid Controls - Method of Diagramming |
| ANSI/(NFPA) T 3.29.2 R2-2000 | 壓力開關.NFPA/T 2.6.1 R2-2000補充件:液動件壓力額定值.檢驗疲勞和確定含金屬外殼的液動壓力開關的壓力的碎裂壓力額定值的方法 | Pressure switch - Pressure rating supplement to NFPA/T2.6.1 R2-2000, Fluid power components - Method for verifying the fatigue and establishing the burst pressure ratings of the pressure containing envelope of a metal fluid power pressure switch |
| ANSI/(NFPA) T 3.4.7 R2-2000 | 蓄能器.NFPA/T 2.6.1 R2-2000補充件:液動件壓力額定值.檢驗疲勞和確定含金屬外殼的液動蓄能器的壓力的碎裂壓力額定值的方法 | Accumulator - Pressure rating supplement to NFPA/T2.6.1 R2-2000, Fluid power components - Method for verifying the fatigue and establishing the burst pressure ratings of the pressure containing envelope of a metal fluid power accumulator |
| ANSI/(NFPA) T 3.5.14 R1-1997 | 液力傳動.直接控制閥門.分界特性的測定方法 | Hydraulic Fluid Power - Directional Control Valve - Method for Determining the Metering Characteristics |
| ANSI/(NFPA) T 3.5.26 R2-2000 | 液壓閥.NFPA/T 2.6.1 R2-2000補充件:液動件壓力額定值.檢驗疲勞和確定含金屬外殼的液動液壓閥的壓力的碎裂壓力額定值的方法 | Hydraulic valve - Pressure rating supplement to NFPA/T2.6.1 R2-2000, Fluid power components - Method for verifying the fatigue and establishing the burst pressure ratings of the pressure containing envelope of a metal fluid power hydraulic valve |
| ANSI/(NFPA) T 3.5.28 R1-1997 | 液力傳動.閥門.壓力不同的流量特性.測量和記錄方法 | Hydraulic Fluid Power - Valves - Pressure Differential-Flow Characteristic - Method of Measuring and Recording |
| ANSI/(NFPA) T 3.5.45-1996 | 液力傳動.兩孔滑動盒式閥門.容量 | Hydraulic Fluid Power - Two-Port Slip-In Cartridge Valves - Cavities (Technically equivalent to ISO 7368: 1989) |
| ANSI/(NFPA) T 3.5.46-1990 | 液力傳動.閥門.壓力釋放固定接口 | Hydraulic Fluid Power - Valves - Pressure Relief Mounting Interface |
| ANSI/(NFPA) T 3.6.29 R2-2000 | 連結桿或螺栓缸.NFPA/T 2.6.1 R2-2000補充件:液動件壓力額定值.檢驗疲勞和確定含金屬外殼的連結桿或螺栓缸的壓力的碎裂壓力額定值的方法 | |
| ANSI/(NFPA) T 3.6.31 R2-2000 | 伸縮缸和無螺栓端口結構缸.NFPA/T 2.6.1 R2-2000補充件:液動件壓力額定值.檢驗疲勞和確定含金屬外殼的液動伸縮缸和無螺栓端口液壓缸的壓力的碎裂壓力額定值的方法 | |
| ANSI/(NFPA) T 3.6.37-1991 | 液力傳動.氣缸.屈曲負載的測定方法 | Hydraulic Fluid Power - Cylinders - Method for Determining the Buckling Load |
| ANSI/(NFPA) T 3.6.54 R1-1997 | 液力傳動.氣缸孔.SAE直螺紋O形環和四螺栓法蘭孔.ISO直螺紋O形環和四螺栓法蘭孔.重載和輕載四方頭接棒氣缸 | Hydraulic Fluid Power - Cylinder Ports - SAE Straight Thread O-Ring and Four-Bolt Flange Ports - ISO Straight Thread O-Ring and Four-Bolt Flange Ports - Heavy-Duty and Light-Duty Square Head Tie Rod Cylinders |
| ANSI/(NFPA) T 3.6.59-1993 | 液力傳動.氣缸.緩沖性能 | Hydraulic Fluid Power - Cylinders - Cushion Performance |
| ANSI/(NFPA) T 3.6.7 R2-1996 | 流體動力系統和產品.正方形頭氣缸,固定尺寸 | Fluid Power Systems and Products - Square Head Industrial Cylinders - Mounting Dimensions |
| ANSI/(NFPA) T 3.9.17 R2-1997 | 液力傳動.無源替代泵.馬達和整體傳輸.基本性能數據的試驗和表示方法 | Hydraulic Fluid Power - Positive Displacement Pumps, Motors and Integral Transmissions - Method of Testing and Presenting Basic Performance Data |
| ANSI/(NFPA) T 3.9.2 R3-1998 | 液力傳動.定點替代泵和馬達.固定法蘭和軸末端的識別編碼和尺寸 | Hydraulic Fluid Power - Positive Displacement Pumps and Motors - Dimensions and Identification Code for Mounting Flanges and Shaft Ends |
| ANSI/(NFPA) T 3.9.20-1992 | 液力傳動.泵.壓力補償泵的基本性能數據的表示和試驗方法 | Hydraulic Fluid Power - Pumps - Method of Testing and Presenting Basic Performance Data for Pressure Compensated Pumps |
| ANSI/(NFPA) T 3.9.22 R2-2000 | 泵/電動機.NFPA/T 2.6.1 R2-2000補充件:液動件壓力額定值.檢驗疲勞和確定含金屬外殼的液動泵和電動機的壓力的碎裂壓力額定值的方法 | Pump/motor - Pressure rating supplement to NFPA/T2.6.1 R2-2000, Fluid power components - Method for verifying the fatigue and establishing the burst pressure ratings of the pressure containing envelope of a metal fluid power pump and motor |
| ANSI/(NFPA) T 3.9.31-2-1994 | 液力傳動.馬達特性的測定.第2部分:起動性 | Hydraulic Fluid Power - Determination of Characteristics of Motors - Part 2: Startability |
| ANSI/(NFPA) T 3.9.33-1997 | 液力傳動.泵.負載感應泵基本性能數據的表示和試驗方法 | Hydraulic Fluid Power - Pumps - Method of Testing and Presenting Basic Performance Data for Load Sensing Pumps |
| ANSI/(NFPA) T3.19.25 R1-2004 | 信息報告.液壓系統.密封裝置.彈性密封件和隔離裝置的存儲、搬運和安裝 | |
| ANSI/(NFPA/JIC) T 2.24.1-1991 | 液力傳動.固定工業機械的系統標準 | Hydraulic Fluid Power - Systems Standard for Stationary Industrial Machinery |
| ANSI/IEEE 802.16/Conformance01-2003 | 與IEEE 802.16相一致的標準.第1部分:10-66GHz無線MAN-SC空中接口用協議實現一致性聲明(PICS)形式表 | (Standard for Conformance to IEEE Standard 802.16 - Part 1: Protocol Implementation Conformance Statement (PICS) Proforma for 10-66 GHz WirelessMAN-SC Air Interface ) |
| ANSI/IEEE 802.16/Conformance03-2004 | IEEE 802.16的一致性標準.第3部分:10-66 GHz MAN-SCT無線空中接口的無線電一致性試驗(RCT) | |
| ANSI/NFPA 1-2003 | 防火符號 | (Fire Prevention Code ) |
| ANSI/NFPA 1-2006 | 統一消防規范T | |
| ANSI/NFPA 10-1998 | 便攜式滅火器 | Portable Fire Extinguishers |
| ANSI/NFPA 10-2002 | 便攜式滅火器 | (Portable Fire Extinguishers ) |
| ANSI/NFPA 1000-1994 | 消防部門職業資格鑒定計劃的認證和認可 | Certification and Accreditation of Fire Service Professional Qualifications Programs |
| ANSI/NFPA 1000-2006 | 消防部門職業資格認可和認證體系標準 | |
| ANSI/NFPA 1001-1997 | 救火專業資格 | Fire Fighter Professional Qualifications |
| ANSI/NFPA 1001-2002 | 消防人員的專業資格 | (Fire Fighter Professional Qualifications ) |
| ANSI/NFPA 1002-1993 | 消防設備操作者的專業資格鑒定 | Fire Apparatus Driver/Operator Professional Qualifications |
| ANSI/NFPA 1002-2003 | 消防設備操作者的職業資格鑒定 | (Fire Apparatus Driver/Operator Professional Qualifications ) |
| ANSI/NFPA 1003-2005 | 機場消防隊員專業資格鑒定 | |
| ANSI/NFPA 1006-2003 | 援救人員專業資格標準 | (Standard for Rescue Technician Professional Qualifications ) |
| ANSI/NFPA 101-2003 | 建筑物和結構對于火中逃生的安全性 | (Safety to Life from Fire in Buildings and Structures ) |
| ANSI/NFPA 101-2006 | 生命安全性編碼器 | |
| ANSI/NFPA 101A-1998 | 人身安全保護選擇方法指南 | Guide On Alternative Approaches to Life Safety |
| ANSI/NFPA 101A-2004 | 人身安全保護選擇方法指南 | |
| ANSI/NFPA 101B-1998 | 出口編碼方法 | Means of Egress Code |
| ANSI/NFPA 101B-2002 | 出口編碼方法 | (Means of Egress Code ) |
| ANSI/NFPA 101M-1995 | 人身安全保護選擇方法 | Alternative Approaches to Life Safety |
| ANSI/NFPA 102-1995 | 裝配座椅、帳蓬和充氣結構 | Assembly Seating, Tents, and Air-Supported Structures |
| ANSI/NFPA 1021-1997 | 救火官員專業資格 | Fire Officer Professional Qualifications |
| ANSI/NFPA 1021-2003 | 消防人員職業資格 | (Fire Officer Professional Qualifications ) |
| ANSI/NFPA 1031-1993 | 消防檢查員的專業資格鑒定 | Professional Qualifications for Fire Inspector |
| ANSI/NFPA 1031-2003 | 消防檢查員的職業資格鑒定 | (Professional Qualifications for Fire Inspector ) |
| ANSI/NFPA 1033-1993 | 消防審查員的專業資格鑒定 | Professional Qualifications for Fire Investigator |
| ANSI/NFPA 1033-2003 | 消防審查員的職業資格鑒定 | (Professional Qualifications for Fire Investigator ) |
| ANSI/NFPA 1035-2005 | 公共消防培訓員專業資格鑒定 | |
| ANSI/NFPA 1041-2002 | 消防指揮員的專業資格鑒定 | Professional Qualifications for Fire Service Instructor |
| ANSI/NFPA 105-2003 | 防煙門和通風門組件的安裝 | (Smoke and Draft-Control Door Assemblies, Installation of ) |
| ANSI/NFPA 1051-2002 | 荒地防火人員的專業資格鑒定 | Wildland Fire Management Personnel Professional Qualifications |
| ANSI/NFPA 1061-2002 | 公共安全遠程通訊儀的專業資格鑒定標準 | Standard for Professional Qualifications for Public Safety Telecommunicator |
| ANSI/NFPA 1071-2000 | 緊急車輛技術專業資質標準 | Standard for Emergency Vehicle Technician Professional Qualifications |
| ANSI/NFPA 1071-2006 | 急救車技術人員職業資格標準 | |
| ANSI/NFPA 1081-2001 | 工業消防人員職業資格鑒定標準 | Standard for Industrial Fire Brigade Member Professional Qualifications |
| ANSI/NFPA 11-1998 | 低膨脹泡沫 | Low-Expansion Foam |
| ANSI/NFPA 11-2002 | 低膨脹泡沫 | (Low-Expansion Foam ) |
| ANSI/NFPA 11-2005 | 低、中、高膨脹泡沫系統標準 | |
| ANSI/NFPA 110-2002 | 應急和備用電源系統 | Emergency and Standby Power Systems |
| ANSI/NFPA 110-2005 | 應急和備用電源系統 | |
| ANSI/NFPA 111-1996 | 儲蓄電能和備用的電力系統 | Stored Electrical Energy Emergency and Standby Power Systems |
| ANSI/NFPA 111-2005 | 儲蓄電能應急和備用電源系統 | |
| ANSI/NFPA 1122-1997 | 無人駕駛火箭 | Unmanned Rockets |
| ANSI/NFPA 1122-2002 | 無人駕駛火箭 | (Unmanned Rockets ) |
| ANSI/NFPA 1123-1995 | 焰火的公開表演 | Public Display of Fireworks |
| ANSI/NFPA 1123-2006 | 焰火演示規范 | |
| ANSI/NFPA 1124-1995 | 焰火的制造、運輸和儲存 | Manufacture, Transportation, and Storage of Fireworks |
| ANSI/NFPA 1124-2003 | 煙火的制造、運輸和儲存 | (Manufacture, Transportation, and Storage of Fireworks ) |
| ANSI/NFPA 1124-2006 | 焰火和焰火制品的制造、運輸、儲存和零售規范 | |
| ANSI/NFPA 1125-2001 | 火箭發動機樣機的制造 | Manufacture of Model Rocket Engines |
| ANSI/NFPA 1126-1996 | 密集觀眾前的煙火施放 | Pyrotechnics before a Proximate Audience |
| ANSI/NFPA 1126-2006 | 臨近觀眾前的焰火制品的燃放標準 | |
| ANSI/NFPA 1127-1995 | 高功率火箭 | High Power Rocketry |
| ANSI/NFPA 1127-2002 | 高功率火箭 | (High Power Rocketry ) |
| ANSI/NFPA 1141-1990 | 樓群的防火方案 | Fire Protection in Planned Building Groups |
| ANSI/NFPA 1141-2003 | 樓群的防火方案 | (Fire Protection in Planned Building Groups ) |
| ANSI/NFPA 1144-2002 | 從森林火災中保護生命和財產 | (Protection of Life and Property from Wildfire ) |
| ANSI/NFPA 1145-2000 | 在手工救火中A級泡沫使用指南 | Guide for the Use of Class A Foams in Manual Structural Fire Fighting |
| ANSI/NFPA 1145-2006 | 在人工建筑救火中A級泡沫的使用指南 | |
| ANSI/NFPA 115-2003 | 激光器防火 | (Laser Fire Protection ) |
| ANSI/NFPA 1150-2004 | 化學物質及野外消防 |
Copyright ? 2008 Worldwide Translation.
寬天下翻譯公司版權所有.Tel:010-83345348
? 相關文章
成功案例：
服務語言:
英語翻譯 | 西班牙語翻譯 | 法語翻譯 | 意大利語翻譯 | 韓語翻譯 | 葡萄牙語翻譯 | 德語翻譯 | 日語翻譯
技術標準翻譯
