標準號 |
中文名稱 |
英文名稱 |
| ANSI/ISA 12.00.01-2002 |
在I級0、1或2區危險位置上用的電氣設備:一般要求 |
(Electrical Apparatus for Use in Class I, Zones 0, 1 & 2 Hazardous (Classified) Locations: General Requirements ) |
| ANSI/ISA 12.00.01-2005 |
在I級0和1區危險場所用的電氣設備.一般要求 |
|
| ANSI/ISA 12.02.01-2002 |
I級0,1,&2危險區使用的電氣設備.內在防爆安全“i“ |
(Electrical Apparatus for Use in Class I, Zones 0, 1, & 2 Hazardous (Classified) Locations - Intrinsic Safety “i“ ) |
| ANSI/ISA 12.10.05-2004 |
20,21和22危險區域(已劃分的)中使用的電氣裝置.20,21和22危險區域的分類 |
|
| ANSI/ISA 12.12.02-2003 |
I級2區危險場所用電氣設備.“n“型防護電氣設備 |
(Electrical Apparatus for Use in Class I Zone 2 Hazardous (Classified) Locations - Type of Protection “n“ ) |
| ANSI/ISA 12.13.01-2000 |
性能要求,燃燒氣體檢測器 |
Performance Requirements, Combustible Gas Detectors |
| ANSI/ISA 12.13.01-2002 |
燃燒氣體檢測器的性能要求 |
(Performance Requirements, Combustible Gas Detectors ) |
| ANSI/ISA 12.16.01(IEC 60079-7)-2002 |
I類1型地帶災害地址設置用電子設備:增加安全性“e“的防護類型 |
(Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations: Type of Protection - Increased Safety “e“ ) |
| ANSI/ISA 12.16.01-2002 |
I級1危險區使用的電氣設備.防護類型:增安型“e“ |
(Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations: Type of Protection - Increased Safety “e“ ) |
| ANSI/ISA 12.27.01-2002 |
電系統和易燃加工流體間加工密封要求 |
(Requirements for Process Sealing Between Electrical Systems and Flammable or Combustible Process Fluids ) |
| ANSI/ISA 60079-1(12.22.01)-2005 |
等級I、危險區域1(已分級)場所用電氣器具:保護類型.阻燃d型 |
|
| ANSI/ISA 60079-18(12.23.01)-2005 |
等級I、危險區域1(已分級)場所用電氣器具:保護類型.密封m型 |
|
| ANSI/ISA 61010-1(82.02.01) 2004, Annex DV US-2005 |
測量、控制和實驗室用電氣設備的安全要求.第1部分:一般要求 |
|
| ANSI/ISA 61010-1(82.02.01) 2004, Annex DV US-2005 |
測量、控制和實驗室用電氣設備的安全要求.第1部分:一般要求 |
|
| ANSI/ISA 61010-1(82.02.01), CSA-C 22.2, No. 1010-1, UL-61010-1-2004 |
電氣和電子試驗、測量、控制和相關設備:一般要求 |
|
| ANSI/ISA 61010-1(82.02.01)-2004 |
電力和電子試驗、測量、控制和相關設備:一般要求 |
|
| ANSI/ISA 67.06.01-2002 |
在核發電廠中有關和儀器頻道安全的性能監測 |
(Performance Monitoring for Nuclear Safety-Related Instrument Channels in Nuclear Power Plants ) |
| ANSI/ISA 75.01.01-2002 |
尺寸控制閥用流量方程式 |
(Flow Equations for Sizing Control Valves ) |
| ANSI/ISA 75.08.01-2002 |
整體式帶凸緣的球型控制閥體的面對面尺寸(類型125、150、250、300和600) |
(Face-to-Face Dimensions for Integral Flanged Globe-Style Control Valve Bodies (Classes 125, 150, 250, 300, and 600) ) |
| ANSI/ISA 75.08.02-2003 |
無凸緣的控制閥端面間的尺寸(級別150、300和600) |
(Face-to-Face Dimensions for Flangeless Control Valves (Classes 150, 300, and 600) ) |
| ANSI/ISA 75.08.05-2002 |
端頭對焊球型控制閥的面對面尺寸(類型150、300、600、900、1500和2500) |
(Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves (Classes 150, 300, 600, 900, 1500, and 2500) ) |
| ANSI/ISA 75.08.06-2002 |
帶凸緣的球型控制閥體的面對面尺寸(類型900、1500和2500) |
(Face-to-Face Dimensions for Flanged Globe-Style Control Valve Bodies (Classes 900, 1500, and 2500) ) |
| ANSI/ISA 75.08.09-2005 |
滑動桿無凸緣控制閥的端面間尺寸(類型150、300和600) |
|
| ANSI/ISA 76.00.02-2002 |
表面安裝流體分配件用模塊化件.第1部分:合成橡膠密封件 |
(Modular Component Interfaces for Surface-Mount Fluid Distribution Components--Part 1: Elastomeric Seals ) |
| ANSI/ISA 77.20-2005 |
礦物燃料發電廠模擬器.功能要求 |
|
| ANSI/ISA 77.41.01-2005 |
礦物燃料發電廠鍋爐燃燒控制裝置 |
|
| ANSI/ISA 77.44.02-2001 |
化石燃料動力工廠蒸氣溫度控制系統.一體型 |
Fossil Fuel Power Plant Steam Temperature Control System - Once-Through Type |
| ANSI/ISA 77.70-2005 |
礦物燃料發電廠設備管道安裝 |
|
| ANSI/ISA 84.00.01Part 1-2004 |
功能安全.加工工業部門的安全儀表測量系統.第1部分:框架、定義、系統、硬件和軟件要求 |
|
| ANSI/ISA 84.00.01Part 2-2004 |
功能安全.加工工業部門的安全儀表測量系統.第2部分:應用指南.信息 |
|
| ANSI/ISA 84.00.01Part 3-2004 |
功能安全.加工工業部門的安全儀表化系統.第3部分:所要求的安全完整性等級的測定指南.信息化 |
|
| ANSI/ISA 88.00.03-2003 |
按批控制.第3部分:總的生產模式和現場生產模式以及表示法 |
(Batch Control Part 3: General and Site Recipe Models and Representation ) |
| ANSI/ISA 95.00.01-2000 |
企業整體控制集成.第1部分:模型和術語 |
Enterprise-Control System Integration, Part 1: Models and Terminology |
| ANSI/ISA 95.00.02-2001 |
企業控制系統一體化.第2部分:對象模型屬性 |
Enterprise-Control System Integration - Part 2: Object Model Attributes |
| ANSI/ISA 98.00.01-2002 |
控制系統技術員的資格和認證 |
(Qualifications and Certification of Control System Technicians ) |
| ANSI/ISA RP 12.15 Part II-1990 |
硫化氫檢測工具的安裝、操作和維修 |
Installation, Operation, and Maintenance of Hydrogen Sulfide Detection Instruments |
| ANSI/ISA RP 12.6-1995 |
危險場所的布線實施規程.工具.第I部分:內部安全 |
Wiring Practices for Hazardous (Classified) Locations - Instrumentation - Part I: Intrinsic Safety |
| ANSI/ISA RP12.13.02-2002 |
可燃氣體檢測裝置的安裝、運行和維護推薦實施規程 |
(Recommended Practice for the Installation, Operation, and Maintenance of Combustible Gas Detection Instruments ) |
| ANSI/ISA S 12.01.01-1999 |
危險地點電氣裝置的信息和定義 |
Definitions and Information Pertaining to Electrical Apparatus in Hazardous (Classified) Locations |
| ANSI/ISA S 12.06.01-1995 |
危險(分級)地區的布線規程.設備.第I部分: 內在安全性 |
Wiring Practices for Hazardous (Classified) Locations - Instrumentation - Part I: Intrinsic Safety |
| ANSI/ISA S 12.12-1994 |
I、II級、2區和III級、1、2區危險場所用不易燃電氣設備 |
Nonincendive Electrical Equipment for Use in Class I and II, Division 2, and Class III, Divisions 1 and 2, Hazardous (Classified) Locations |
| ANSI/ISA S 12.22.01-2001 |
I級1區危險地帶使用的電驅動裝置:防護型.防火d |
Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations: Type of Protection - Flameproof d |
| ANSI/ISA S 5.4-1991 |
測量環路圖示 |
Instrument Loop Diagrams |
| ANSI/ISA S 50.02 Part 2-1992 |
工業控制系統用字段總線標準.第2部分:物理層規范和服務定義 |
Fieldbus Standard for Use in Industrial Control Systems Part 2: Physical Layer Specification and Service Definition |
| ANSI/ISA S 67.04 Part 1-1994 |
核安全相關儀器的設置點 |
Setpoints for Nuclear Safety-Related Instrumentation |
| ANSI/ISA S 67.10-1994 |
核電站中使用的抽樣線管道標準 |
Sample-Line Piping and Tubing Standard for Use in Nuclear Power Plants |
| ANSI/ISA S 67.14-1994 |
核設施中測量和控制技術的鑒定和認證 |
Qualifications and Certification of Instrumentation and Control Technicians in Nuclear Facilities |
| ANSI/ISA S 7.0.01-1996 |
測量氣體的質量標準 |
Quality Standard for Instrument Air |
| ANSI/ISA S 71.03-1995 |
工藝測量和控制用環境條件:機械的影響 |
Environmental Conditions for Process Measurements and Control: Mechanical Influences |
| ANSI/ISA S 75.08.03-2001 |
承插焊接端頭和螺旋端頭球狀控制閥的面到面尺寸 |
Face-to-Face Dimensions for Socket Weld-End and Screwed-End Globe-Style Control Valves (ANSI Classes 150, 300, 600, 900, 1500, and 2500) |
| ANSI/ISA S 75.08.04-2001 |
對焊端頭球狀控制閥的面到面尺寸 |
Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves |
| ANSI/ISA S 75.08.07-2001 |
獨立法蘭球狀控制閥的面到面尺寸 |
Face-to-Face Dimensions for Separable Flanged Globe-Style Control Valves (Classes 150, 300, and 600) |
| ANSI/ISA S 75.15-1993 |
對焊端球狀控制閥的面對面尺寸(ANSI等級150、300、600、900、1500、2500) |
Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves (ANSI Classes 150, 300, 600, 900, 1500, and 2500) |
| ANSI/ISA S 75.19.01-2001 |
控制閥的靜水試驗 |
Hydrostatic Testing of Control Valves |
| ANSI/ISA S 77.20-1993 |
燒礦物燃料的動力設備模擬器.功能要求 |
Fossil-Fuel Power Plant Simulators - Functional Requirements |
| ANSI/ISA S 77.42.01-1999 |
化石燃料工廠回水控制系統.鼓型 |
Fossil Fuel Plant Feedwater Control System - Drum Type |
| ANSI/ISA S 77.44-1994 |
燒礦物燃料設備蒸氣溫度控制系統.筒式 |
Fossil Fuel Plant Steam Temperature Control System - Drum Type |
| ANSI/ISA S 77.70-1994 |
燒礦物燃料動力設備管道安裝 |
Fossil Fuel Power Plant Instrument Piping Installation |
| ANSI/ISA S 82.02.02-1996 |
測量、控制和實驗室用電力設備的安全要求 |
Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use |
| ANSI/ISA S 82.02.04-1996 |
測量、控制和實驗室用電力設備的安全要求.第2-032部分:電測量和試驗用手持電流線夾的特殊要求 |
Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 2-032: Particular Requirements for Hand-Held Current Clamps for Electrical Measurement and Test |
| ANSI/ISA S 84.01-1996 |
加工工業的安全儀器化系統的應用 |
Application of Safety Instrumented Systems for the Process Industries |
| ANSI/ISA S 92.02.01 Part 1-1998 |
氧化氯探測儀的性能要求(50-1000ppm全尺寸) |
Performance Requirements for Chlorine Monoxide Detection Instruments (50-1000 ppm Full Scale) |
| ANSI/ISA S 92.04.01 Part I-1996 |
探測缺氧或含氧豐富的空氣用儀器的性能要求 |
Performance Requirements for Instruments Used to Detect Oxygen-Deficient/Enriched Atmospheres |
| JIS A0001-1999 |
基本模數 |
(Basic module) |
| JIS A0002-1999 |
建筑模數術語 |
(Glossary of terms used in building module) |
| JIS A0003-1999 |
建筑構件的公差 |
(Tolerances for building) |
| JIS A0004-1999 |
建筑模數的配合原則 |
(Principle of modular coordination in buildings) |
| JIS A0005-1966 |
建筑物開口部構件標準公稱尺寸 |
(Standard nominal size of opening components for buildings) |
| JIS A0006-1966 |
建筑用板的標準尺寸 |
(Standard size of boards for buildings) |
| JIS A0007-1967 |
建筑用鐵制框架墻壁構件的標準公稱尺寸 |
(Standard nominal size of steel framed wall component for buildings) |
| JIS A0008-1967 |
建筑用鐵制框架屋頂構件的標準公稱尺寸 |
(Standard nominal size of steel framed roof component for buildings) |
| JIS A0009-1970 |
建筑物活動隔墻構件的公稱尺寸 |
(Nominal dimension of movable partition components for buildings) |
| JIS A0012-1980 |
住宅衛生設備的模數組合尺寸 |
(Modular co-ordination -- Sizes of sanitary unit for dwellings) |
| JIS A0013-1980 |
住宅壁式廚房設備的模數組合尺寸 |
(Modular co-ordination -- Sizes of wall type kitchen unit for dwellings) |
| JIS A0014-1976 |
住宅空調設備的模數組合尺寸 |
(Modular co-ordinating sizes of air-conditioning unit for dwellings) |
| JIS A0015-1976 |
住宅管道系統的模數組合尺寸 |
(Modular co-ordinating sizes of piping unit for dwellings) |
| JIS A0016-1979 |
貯藏組合間墻內容納機器空間的模數協調尺寸 |
(Modular coordination-coordinating size of opening for built-in appliances in storage furniture) |
| JIS A0017-1998 |
廚房設備.組合尺寸 |
(Kitchen equipment -- Coordinating sizes) |
| JIS A0018-1992 |
住宅配套設備單的模數協調尺寸 |
(Modular co-ordination of equipment unit for dwellings) |
| JIS A0030-1994 |
建筑構件性能的分類 |
(Classification of performance for building elements) |
| JIS A0101 ERRATUM 1-2003 |
勘誤 |
(ERRATUM) |
| JIS A0101-2003 |
土木工程制圖通則 |
(General rules for civil engineering drawings) |
| JIS A0150-1999 |
建筑制圖通則 |
(Drawing office practice for architecture and building (General rules)) |
| JIS A0151-1961 |
門、窗符號 |
(Symbols for windows and doors) |
| JIS A0201-1971 |
建筑用室內外裝飾材料術語 |
(Glossary of terms used in finishing building materials for interior and exterior uses) |
| JIS A0202-2000 |
隔熱.詞匯 |
(Thermal insulation -- Vocabulary) |
| JIS A0203-1999 |
混凝土術語 |
(Concrete terminology) |
| JIS A0204 ERRATUM 1-2002 |
地質地圖.圖例的符號、顏色、圖形、術語和表示(勘誤1) |
(Geological map -- Symbols, colors, patterns, terms, and presentation of legend (Erratum 1)) |
| JIS A0204-2002 |
地質圖.符號、顏色、圖形、術語和圖例的表示 |
(Geological map -- Symbols, colors, patterns, terms, and presentation of legend) |
| JIS A1101-1998 |
混凝土塌落度的試驗方法 |
(Method of test for slump of concrete) |
| JIS A1102-1999 |
集料的篩分試驗方法 |
(Method of test for sieve analysis of aggregates) |
| JIS A1103 ERRATUM 1-2003 |
JIS A1103的技術勘誤1 |
(ERRATUM) |
| JIS A1103-2003 |
測定集料通過75mum試驗篩的量的試驗方法 |
(Method of test for amount of material passing test sieve 75 mum in aggregates) |
| JIS A1104 ERRATUM 1-2000 |
集料的單容重和集料實積率的測定方法(勘誤1) |
(Methods of test for bulk density of aggregates and solid content in aggregates (Erratum 1)) |
| JIS A1104-1999 |
集料的單容重和集料實積率的測定方法 |
(Methods of test for bulk density of aggregates and solid content in aggregates) |
| JIS A1104-1999/ERRATUM 1-2000 |
集料的體積密度和集料中固體含量的試驗方法(勘誤1) |
(Methods of test for bulk density of aggregates and solid content in aggregates (Erratum 1)) |
| JIS A1105-2001 |
細集料中有機雜質的試驗方法 |
(Method of test for organic impurities in fine aggregate) |
| JIS A1106-1999 |
混凝土彎曲強度的試驗方法 |
(Method of test for flexural strength of concrete) |
| JIS A1107-1993 |
混凝土鉆芯樣和截梁試樣的采取及其試驗方法 |
(METHOD OF OBTAINING AND TESTING DRILLED CORES AND SAWED BEAMS OF CONCRETE) |
| JIS A1107-2002 |
混凝土鉆芯壓縮強度的抽樣及試驗方法 |
(Method of sampling and testing for compressive strength of drilled cores of concrete) |
| JIS A1108-1999 |
混凝土抗壓強度的試驗方法 |
(Method of test for compressive strength of concrete) |
| JIS A1109-1999 |
細集料的比重及吸水率的試驗方法 |
(Methods of test for density and water absorption of fine aggregates) |
| JIS A1110-1999 |
粗集料的比重及吸水率試驗方法 |
(Methods of test for density and water absorption of coarse aggregates) |
| JIS A1111-2001 |
細集料表面濕度的試驗方法 |
(Method of test for surface moisture in fine aggregate) |
| JIS A1112 ERRATUM 1-2003 |
JIS A1112的技術勘誤1 |
(ERRATUM) |
| JIS A1112-2003 |
新澆混凝土的沖洗分析試驗方法 |
(Method of test for washing analysis of fresh concrete) |
| JIS A1113-1999 |
混凝土抗張強度的試驗方法 |
(Method of test for splitting tensile strength of concrete) |
| JIS A1114-2002 |
混凝土棱柱形截塊強度的抽樣和試驗方法 |
(Method of sampling and testing for strength of sawed prism of concrete) |
| JIS A1115-1998 |
新澆混凝土的取樣方法 |
(Method of sampling fresh concrete) |
| JIS A1116-1998 |
新澆混凝土的容重和空氣含量的試驗方法 |
(Method of test for unit mass and air content mass type of fresh concrete) |
| JIS A1118-1997 |
容積法測量新澆混凝土中空氣含量的試驗方法 |
(Method of test for air content of fresh concrete byvolumetric method) |
| JIS A1119-1998 |
新攪拌混凝土中成分變化率的試驗方法 |
(Method of test for variability of constituents in freshly mixed concrete) |
| JIS A1120-1976 |
用德威爾試驗機作粗集料的磨損試驗方法 |
(Method of test for abrasion of coarse aggregate by use of the deval machine) |
| JIS A1121-2001 |
用洛杉磯試驗機測定粗集料耐磨性的試驗方法 |
(Method of test for resistance to abrasion of coarse aggregate by use of the Los Angeles machine) |
| JIS A1122 ERRATUM 1-2005 |
勘誤 |
|
| JIS A1122-1998 |
使用硫酸鈉的集料穩定性試驗方法 |
(Method of test for soundness of aggregates by use of sodium sulfate) |
| JIS A1123 ERRATUM 1-2004 |
勘誤 |
|
| JIS A1123-2003 |
混凝土泌水的試驗方法 |
(Method of test for bleeding of concrete) |
| JIS A1125-2001 |
干燥法測定集料的含水總量及表面濕度的試驗方法 |
(Methods of test for total moisture content of aggregate and surface moisture in aggregate by drying) |
| JIS A1126 ERRATUM 1-2001 |
用劃痕試驗進行粗集料中軟質顆粒含量的試驗方法(勘誤1) |
(Method of test for content of soft particles in coarse aggregate by scratching (Erratum 1)) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com