微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ANSI B16.18 | 鑄銅合金焊錫連接壓力配件 | Cast Copper Alloy Solder Joint Pressure Fittings |
| ANSI B212.1 | 硬質合金坯料、釬焊和實心單點工具 | Carbide Blanks, Brazed and Solid Single-Point Tools |
| ANSI B212.14 | 銷鎖扣型固定器用帶轉位刀片的硬質合金座 | Carbide Seats Used with Indexable Inserts for Pin Lock-Type Holders |
| ANSI B212.15 | 切削工具.硬質合金鑲嵌鉆頭的磚砌體鉆及其磚砌體鉆的毛坯 | Cutting tools - Carbide-tipped masonry drills and blanks for carbide-tipped masonry drills |
| ANSI B212.16 | 切削工具.硬質合金圓頭銼坯料 | Cutting Tools - Blanks for Carbide Burs |
| ANSI B212.2 | 切削工具.夾緊型刀柄夾持器用的帶可轉位鑲嵌刀片的硬質合金刀座 | Cutting Tools - Carbide Seats Used with Indexable Inserts for Clamp-Type Holders |
| ANSI B212.7 | 切削工具.硬質合金工具工業中使用的螺紋緊固件 | Cutting tools - Threaded fasteners used in the carbide tooling industry |
| ANSI B212.8 | 切削工具.麻花鉆、鉸刀、端銑刀和任選鉆桿用硬質合金坯料 | Cutting Tools - Carbide Blanks for Twist Drills, Reamers, End Mills, and Random Rod |
| ANSI B212.9 | 可傾斜圓盤鋸用硬質合金坯料 | Carbide Blanks for Tipping Circular Saws |
| ANSI B94.47M | 夾緊式刀具夾持器用的與可轉位刀片一起使用的硬質合金斷屑器 | Carbide chip breakers used with indexable inserts for clamp type holders |
| ANSI H35.1/H 35.1M | 鋁材的美國國家標準合金和回火名稱與符號注冊系統 | American National Standard Alloy and Temper Designation Systems for Aluminum |
| ANSI H35.4 | 非合金鋁的命名與符號系統 | Designation System for Unalloyed Aluminum |
| ANSI/AAMI/ISO 10993-15 | 醫療器械的生物學評價.第15部分:金屬與合金降解產物的識別與定量 | Biological Evaluation of Medical Devices - Part 15: Identification and Quantification of Degradation Products from Metals and Alloys |
| ANSI/ADA 1 | 汞齊和牙科汞用合金 | Alloy for Amalgam and Dental Mercury |
| ANSI/ADA 109 | 存放牙科汞合金廢料法和汞合金廢料儲存/船載集裝箱要求 | Procedures for Storing Dental Amalgam Waste and Requirements for Amalgam Waste Storage/Shipment Containers |
| ANSI/ADA 14 | 牙科用鉻鈷鑄造合金 | Casting Alloy, Dental Chromium-Cobalt |
| ANSI/ADA 2 | 牙科金合金用石膏粘結鑄造精密模 | Gypsum-Bonded Casting Investment for Dental Gold Alloy |
| ANSI/ADA 5 | 牙科鑄模合金 | Dental Casting Alloys |
| ANSI/ADA 88 | 牙科用青銅合金 | Dental Brazing Alloys |
| ANSI/API RP578 | 新的和原有合金管系統的材料檢定程序 | Material Verification Program for New and Existing Alloy Piping Systems |
| ANSI/ASME B16.22 | 鍛銅和銅合金釬焊接壓力連接件 | Wrought Copper and Copper Alloy Solder-Joint Pressure Fittings |
| ANSI/ASME B16.23 | DWV鑄銅合金釬焊連接排水配件 | Cast Copper Alloy Solder Joint Drainage Fittings: DWV |
| ANSI/ASME B16.24 | 鑄銅合金管法蘭和法蘭配件:等級150、300、600、900、1500和2500 | Cast Copper Alloy Pipe Flanges and Flanged Fittings: Classes 150, 300, 600, 900, 1500, and 2500 |
| ANSI/ASME B16.26 | 青銅擴口管用鑄銅合金配件 | Cast Copper Alloy Fittings for Flared Copper Tubes |
| ANSI/ASME B16.29 | DWV型鍛銅和鍛銅合金釬焊排水配件 | Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings - DWV |
| ANSI/ASME B16.50 | 鍛造銅及銅合金釬焊承壓配件 | Wrought Copper and Copper Alloy Braze-Joint Pressure Fittings |
| ANSI/ASTM A1018 | 片鋼和帶鋼、厚卷材、熱軋、高強度低合金結構碳鋼以及改良可模塑高強度鈳或釩低合金鋼規范 | Specification for Steel, Sheet and Strip, Heavy Thickness Coils, Hot Rolled, Carbon, Structural, High-Strength Low-Alloy, Columbium or Vanadium, and High-Strength Low-Alloy With Improved Formability |
| ANSI/ASTM A182/A 182M | 高溫設備用鍛制或軋制合金鋼管法蘭、鍛制管件、閥門及零件規范 | Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service |
| ANSI/ASTM A193/A 193M | 高溫設備用合金鋼和不銹鋼螺栓材料規范 | Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service |
| ANSI/ASTM A194/A 194M | 高壓和高溫設備用碳素鋼與合金鋼螺栓和螺母規范 | Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure and High-Temperature Service |
| ANSI/ASTM A213/A 213M | 鍋爐、過熱器和熱交換器用無縫鐵素體和奧氏體合金鋼管規范 | Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes |
| ANSI/ASTM A265 | 鎳及鎳基合金復合鋼板規范 | Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate |
| ANSI/ASTM A320/A 320M | 低溫設備用合金鋼螺栓材料規范 | Specification for Alloy-Steel Bolting Materials for Low-Temperature Service |
| ANSI/ASTM A427 | 冷軋和熱軋用鍛制合金鋼輥規范 | Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction |
| ANSI/ASTM A450 | 碳素鋼管、鐵素體合金鋼管及奧氏體合金鋼管規范 | Specification for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes |
| ANSI/ASTM A494/A 494M | 鎳和鎳合金鑄件規范 | Specification for Castings, Nickel and Nickel Alloy |
| ANSI/ASTM A608 | 高溫承壓設備用離心鑄造鐵鉻鎳高合金鋼管規范 | Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures |
| ANSI/ASTM A668 | 工業用普通碳素鋼和合金鋼鍛件規范 | Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use |
| ANSI/ASTM A709/A 709M | 橋梁用碳素鋼和高強度低合金結構型鋼、鋼板、鋼棒及調質合金結構鋼棒規范 | Specification for Carbon and High-Strength Low-Alloy Structural Steel Shapes, Plates, and Bars and Quenched-and-Tempered Alloy Structural Steel Plates for Bridges |
| ANSI/ASTM A712 | 軟磁性合金電阻率測試方法 | Test Method for Electrical Resistivity of Soft Magnetic Alloys |
| ANSI/ASTM A743/A 743M | 普通耐腐蝕鉻鐵及鎳鉻鐵合金鑄件規范 | Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion-Resistant, for General Application |
| ANSI/ASTM A753 | 鎳鐵軟磁合金規范 | Specification for Nickel-Iron Soft Magnetic Alloys |
| ANSI/ASTM A768 | 渦輪機轉子及軸用經真空處理的12/T%鉻合金鋼鍛件規范 | Specification for Vacuum-Treated 12/T% Chromium Alloy Steel Forgings for Turbine Rotors and Shafts |
| ANSI/ASTM A801/A 801M | 鐵鈷高磁性飽和合金規范 | Specification for Iron-Cobalt High Magnetic Saturation Alloys |
| ANSI/ASTM A837 | 滲碳合金鋼鍛件規范 | Specification for Steel Forgings, Alloy, for Carburizing Applications |
| ANSI/ASTM A838 | 繼電器用易切鐵素體不銹軟磁合金規范 | Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloys for Relay Applications |
| ANSI/ASTM A901 | 半成品型非晶磁芯合金規范 | Specification for Amorphous Magnetic Core Alloys Semi-Processed Types |
| ANSI/ASTM A904 | 50鎳-50鐵粉末冶金(P/M)軟磁合金規范 | Specification for 50 Nickel-50 Iron Powder Metallurgy (P/M) Soft Magnetic Alloys |
| ANSI/ASTM A940 | 渦輪轉子用差溫?zé)崽幚碚婵仗幚礓撳懠?、合金?guī)范 | Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors |
| ANSI/ASTM B102 | 鉛和錫合金壓模鑄件規范 | Specification for Lead and Tin Alloy Die Castings |
| ANSI/ASTM B127 | 鎳銅合金(UNS N04400)板、薄板和帶材規范 | Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip |
| ANSI/ASTM B163 | 無縫鎳和鎳合金冷凝和熱交換管規范 | Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes |
| ANSI/ASTM B164 | 鎳銅合金條材、棒材和線材規范 | Specification for Nickel-Copper Alloy Rod, Bar, and Wire |
| ANSI/ASTM B165 | 無縫鎳銅合金(UNS N04400)管規范 | Specification for Nickel-Copper Alloy (UNS N04400) Seamless Pipe and Tube |
| ANSI/ASTM B166 | 鎳鉻鐵合金(UNS N06600, N06601, and N06690)及鎳鉻鈷鉬合金(UNS N06617)條材、棒材及線材規范 | Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, and N06690) and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Rod, Bar, and Wire |
| ANSI/ASTM B167 | 無縫鎳鉻鐵合金(UNS N06600, N06601, and N06690)管規范 | Specification for Nickel-Chromium-Iron Alloy (UNS N06600, N06601, and N06690) Seamless Pipe and Tube |
| ANSI/ASTM B168 | 鎳鉻鐵合金(UNS N06600, N06601 and N06690)及鎳鉻鈷鉬合金(UNS N06617)板、薄板和帶材規范 | Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601 and N06690) and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Plate, Sheet, And Strip |
| ANSI/ASTM B240 | 壓模鑄錠中鋅合金規范 | Specification for Zinc Alloys in Ingot Form for Die Castings |
| ANSI/ASTM B327 | 鋅壓模鑄造合金的主要合金規范 | Specification for Master Alloys Used in Making Zinc Die Casting Alloys |
| ANSI/ASTM B333 | 鎳鉬合金板、薄板和帶材規范 | Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip |
| ANSI/ASTM B335 | 鈮鉬合金棒材規范 | Specification for Nickel-Molybdenum Alloy Rod |
| ANSI/ASTM B344 | 電氣加熱元件用拉制或軋制鎳-鉻合金及鎳-鉻-鐵合金規范 | Specification for Drawn or Rolled Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating Elements |
| ANSI/ASTM B366 | 工廠鍛壓鎳和鎳合金配件規范 | Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings |
| ANSI/ASTM B407 | 鎳鐵鉻合金無縫管規范 | Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube |
| ANSI/ASTM B408 | 鎳鐵鉻合金桿材和棒材規范 | Specification for Nickel-Iron-Chromium Alloy Rod and Bar |
| ANSI/ASTM B409 | 鎳鐵鉻合金板材、薄板材和帶材規范 | Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip |
| ANSI/ASTM B423 | 鎳鐵鉻鉬銅合金(UNS N08825 and UNS N08221)無縫管規范 | Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825 and UNS N08221) Seamless Pipe and Tube |
| ANSI/ASTM B424 | 鎳鐵鉻鉬銅合金(UNS N08825 and N08221)板、薄板及帶材規范 | Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and N08221) Plate, Sheet, and Strip |
| ANSI/ASTM B425 | 鎳鐵鉻鉬銅合金(UNS N08825 and UNS N08221)桿材和棒材規范 | Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and N08221) Rod and Bar |
| ANSI/ASTM B434 | 鎳鉬鉻鐵合金(UNS N10003)板、薄板和帶材規范 | Specification for Nickel-Molybdenum-Chromium-Iron Alloy (UNS N10003) Plate, Sheet, and Strip |
| ANSI/ASTM B443 | 鎳鉻鉬鈳合金(UNS N06625)板、薄板和帶材規范 | Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625) Plate, Sheet, and Strip |
| ANSI/ASTM B444 | 鎳鉻鉬鈳合金(UNS N06625)管規范 | Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625) Pipe and Tube |
| ANSI/ASTM B446 | 鎳鉻鉬鈳合金(UNS N06625)條材和棒材規范 | Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625) Rod and Bar |
| ANSI/ASTM B464 | UNS NO8020、UNS NO8024和UNS NO8026合金焊管規范 | Specification for Welded UNS N08020, UNS N08024, and UNS N08026 Alloy Pipe |
| ANSI/ASTM B468 | UNS NO8020、UNS NO8024和UNS NO8026合金焊管規范 | Specification for Welded UNS N08020, UNS N08024, and UNS N08026 Alloy Tubes |
| ANSI/ASTM B471 | UNS NO8020、UNS NO8026和UNS NO8024鎳合金彈簧絲規范 | Specification for UNS N08020, UNS N08026, and UNS N08024 Nickel Alloy Spring Wire |
| ANSI/ASTM B473 | UNS NO8020、UNS NO8026及UNS NO8024鎳合金棒材和線材規范 | Specification for UNS N08020, UNS N08026, and UNS N08024 Nickel Alloy Bar and Wire |
| ANSI/ASTM B474 | UNS NO8020、UNS NO8026和UNS NO8024鎳合金電熔焊管規范 | Specification for Electric Fusion Welded UNS N08020, UNS N08026, and UNS N08024 Nickle Alloy Pipe |
| ANSI/ASTM B512 | 鎳鉻硅合金(UNS N08330)坯料和棒材規范 | Specification for Nickel-Chromium-Silicon Alloy (UNS N08330) Billets and Bars |
| ANSI/ASTM B514 | 鎳鐵鉻合金焊管規范 | Specification for Welded Nickel-Iron-Chromium Alloy Pipe |
| ANSI/ASTM B515 | UNS NO8800、UNS N08810和UNS NO8811合金焊管規范 | Specification for Welded UNS N08800, UNS N08810, and UNS N08811 Alloy Tubes |
| ANSI/ASTM B516 | 鎳鉻鐵合金(UNS N06600) UNS N06025 and UNS N06045焊管規范 | Specification for Welded Nickel-Chromium-Iron Alloy (UNS N06600) UNS N06025 and UNS N06045 Tubes |
| ANSI/ASTM B517 | 鎳鉻鐵合金(UNS N06600) UNS N06025 and N06045焊管試驗方法 | Test Method for Welded Nickel-Chromium-Iron-Alloy (UNS N06600) UNS N06025 and N06045 Pipe |
| ANSI/ASTM B522 | 金銀鉑電觸點合金規范 | Specification for Gold-Silver-Platinum Electrical Contact Alloy |
| ANSI/ASTM B535 | 鎳鐵鉻硅合金(UNS N08330 and UNS N08332)無縫管規范 | Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and UNS N08332) Seamless Pipe |
| ANSI/ASTM B536 | 鎳鐵鉻硅合金板材、薄板材及帶材規范 | Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Plate, Sheet, and Strip |
| ANSI/ASTM B541 | 金電觸點合金規范 | Specification for Gold Electrical Contact Alloy |
| ANSI/ASTM B546 | 電熔焊接鎳鉻鈳鉬合金(UNS N06617)、鎳鐵鉻硅合金(UNS N08330 and UNS N08332)、 鎳鉻鐵合金(UNS N06025)和 | Specification for Electric-Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe |
| ANSI/ASTM B563 | 鈀銀銅電觸點合金規范 | Specification for Palladium-Silver-Copper Electrical Contact Alloy |
| ANSI/ASTM B573 | 鎳鉬鉻鐵合金(UNS N10003)棒材規范 | Specification for Nickel-Molybdenum-Chromium-Iron Alloy (UNS N10003) Rod |
| ANSI/ASTM B574 | 低碳鎳鉬鉻,低碳鎳鉻鉬和低碳鎳鉻鉬鎢合金棒規范 | Specification for Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-Chromium-Molybdenum and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Rod |
| ANSI/ASTM B575 | 低碳鎳鉬鉻和低碳鎳鉻鉬合金板、薄板及帶材規范 | Specification for Low-Carbon Nickel-Molybdenum-Chromium and Low-Carbon Nickel-Chromium-Molybdenum Alloy Plate, Sheet, and Strip |
| ANSI/ASTM B581 | 鎳鉻鐵鉬銅合金棒規范 | Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod |
| ANSI/ASTM B582 | 鎳鉻鐵鉬銅合金板材、薄板材及帶材規范 | Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip |
| ANSI/ASTM B603 | 電加熱元件的拉伸或輥軋鐵鉻鋁合金規范 | Specification for Drawn or Rolled Iron-Chromium-Aluminum Alloys for Electrical Heating Elements |
| ANSI/ASTM B619 | 焊接用鎳和鎳鈷合金管規范 | Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe |
| ANSI/ASTM B621 | 鎳鐵鉻鉬合金(UNS N08320)棒材規范 | Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod |
| ANSI/ASTM B622 | 無縫鎳和鎳鈷合金管規范 | Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube |
| ANSI/ASTM B626 | 焊接鎳和鎳鈷合金管規范 | Specification for Welded Nickel and Nickel-Cobalt Alloy Tube |
| ANSI/ASTM B637 | 高溫工作沉淀硬化鎳合金棒材、鍛件及鍛坯規范 | Specification for Precipitation Hardening Nickel Alloy Bars, Forgings, and Forging Stock for High-Temperature Service |
| ANSI/ASTM B639 | 高溫設備用沉積硬化含鈷合金桿材、棒材、鍛件和鍛造坯料規范 | Specification for Precipitation Hardening Cobalt-Containing Alloys (UNS R30155 and UNS R30816) Rod, Bar, Forgings, and Forging Stock for High-Temperature Service |
| ANSI/ASTM B649 | 鎳鐵鉻鉬銅低碳合金(UNS N08904)、鎳鐵鉻鉬銅氮低碳合金(UNS N08925,UNS N08031和UNS N08926)和鉻鎳鐵氮低 | Specification for Ni-Fe-Cr-Mo-Cu Low-Carbon Alloy (UNS N08904) and Ni-Fe-Cr-Mo-Cu-N Low Carbon Alloys (UNS 08925, UNS N08031, and UNS N08925) Cr-Ni-Fe-N Low Carbon (UNS R20033) |
| ANSI/ASTM B663 | 銀鎢硬質合金電觸點材料規范 | Specification for Silver-Tungsten Carbide Electrical Contact Material |
| ANSI/ASTM B669 | 鍛造及壓模鑄用鋅鋁合金鑄錠規范 | Specification for Zinc-Aluminum Alloys in Ingot Form for Foundry and Die Castings |
| ANSI/ASTM B670 | 高溫設備用沉淀硬化鎳合金板材、薄板材及帶材規范 | Specification for Precipitation-Hardening Nickel Alloy (UNS N07718) Plate, Sheet, and Strip for High-Temperature Service |
| ANSI/ASTM B672 | 穩定的鎳鐵鉻鉬鈮合金棒材及線材規范 | Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Bar and Wire |
| ANSI/ASTM B690 | 鐵鎳鉻鉬合金(UNS N08366 and UNS No8367)無縫管規范 | Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS No8367) Seamless Pipe and Tube |
| ANSI/ASTM B691 | 鐵鎳鉻鉬合金(UNS N08366 And UNS N08367)條材、棒材及線材規范 | Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 And UNS N08367) Rod, Bar, and Wire |
| ANSI/ASTM B704 | UNS NO6625和UNS NO8825合金焊管規范 | Specification for Welded UNS N06625 and UNS N08825 Alloy Tubes |
| ANSI/ASTM B705 | 鎳合金焊接管規范 | Specification for Nickel-Alloy (UNS N06625 and N08825) Welded Pipe |
| ANSI/ASTM B709 | 鐵鎳鉻鉬合金(UNS No8028)板材、薄板和帶材 | Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS No8028) Plate, Sheet, and Strip |
| ANSI/ASTM B710 | 鎳鐵鉻硅合金焊接管規范 | Specification for Nickel-Iron-Chromium Silicon-Alloy Welded Pipe |
| ANSI/ASTM B719 | 鎳鉻鉬鈷鎢鐵硅合金(UNS N06333)棒材規范 | Specification for Nickel-Chromium-Molybdenum-Cobalt- Tungsten-Iron-Silicon Alloy (UNS N06333) Bar |
| ANSI/ASTM B722 | 鎳鉻鉬鈷鎢鐵硅合金(UNS N06333)無縫管規范 | Specification for Nickel-Chromium-Molybdenum-Colbalt- Tungsten-Iron-Silicon Alloy (UNS N06333) Seamless Pipe and Tube |
| ANSI/ASTM B725 | 焊接鎳(UNS N02200/UNS No2201)和鎳銅合金(UNS N04400)管規范 | Specification for Welded Nickel (UNS N02200/UNS No2201) and Nickel-Copper Alloy (UNS N04400) Pipe |
| ANSI/ASTM B726 | 鎳鉻鉬鈷鎢鐵硅合金 (UNS N06333)焊管規范 | Specification for Nickel-Chromium-Molybdenum-Colbalt- Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Tube |
| ANSI/ASTM B730 | 焊接鎳和鎳銅合金管(UNS N04400)規范 | Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Tube |
| ANSI/ASTM B739 | 鉬鐵鉻硅合金焊管規范 | Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Tube |
| ANSI/ASTM B749 | 鉛和鉛合金帶材、薄板材和板材產品規范 | Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products |
| ANSI/ASTM B750 | 熱浸涂層鋅5%鋁混合稀土合金(UNS Z38510)鑄錠規范 | Specification for Zinc-5 % Aluminum-Mischmetal Alloy (UNS Z38510) in Ingot Form for Hot-Dip Coatings |
| ANSI/ASTM B751 | 鎳和鎳合金無縫和焊管規范 | Specification for General Requirements for Nickel and Nickel Alloy Seamless and Welded Tube |
| ANSI/ASTM B753 | 恒溫組份合金規范 | Specification for Thermostat Component Alloys |
| ANSI/ASTM B76 | 電加熱用鎳鉻和鎳鉻鐵合金加速壽命試驗方法 | Test Method for Accelerated Life of Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating |
| ANSI/ASTM B77 | 電阻合金的熱電動力試驗方法 | Test Method for Thermoelectric Power of Electrical-Resistance Alloys |
| ANSI/ASTM B775 | 鎳和鎳合金無縫和焊管規范 | Specification for General Requirements for Nickel and Nickel Alloy Seamless and Welded Pipe |
| ANSI/ASTM B78 | 鐵鎳鋁合金電加熱加速壽命試驗方法 | Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating |
| ANSI/ASTM B791 | 鋅鋁合金鑄造和壓模鑄件規范 | Specification for Zinc-Aluminum (Za) Alloy Foundry and Die Castings |
| ANSI/ASTM B792 | 空殼鑄造鑄錠鋅合金規范 | Specification for Zinc Alloys in Ingot Form for Slush Casting |
| ANSI/ASTM B793 | 塑料注模和壓模鑄造鋅鑄造合金錠規范 | Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds |
| ANSI/ASTM B805 | UNS N07716、N07725和N09777沉淀硬化鎳合金鋼棒和鋼絲規范 | Specification for Precipitation Hardening Nickel Alloys UNS N07716, N07725 and N09777 Bar and Wire |
| ANSI/ASTM B814 | 鎳鉻鐵鉬鎢合金板材、薄板材和帶材規范 | Specification for Nickel-Chromium-Iron-Molybdenum-Tungsten Alloy (UNS N06920) Plate, Sheet, and Strip |
| ANSI/ASTM B815 | 鈷鉻鎳鉬鎢合金桿規范 | Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod |
| ANSI/ASTM B818 | 鈷鉻鎳鉬鎢合金(UNS R31233)板,薄板和帶材規范 | Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Plate, Sheet and Strip |
| ANSI/ASTM B829 | 鎳和鎳合金無縫管一般要求規范 | Specification for General Requirements for Nickel And Nickel Alloy Seamless Pipe and Tube |
| ANSI/ASTM B834 | 壓力強化粉末冶金鐵鎳鉻鉬和鎳鉻鉬鈳(Nb)合金管法蘭、管配件、閥門和零件規范 | Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625) Alloy Pipe Flanges, Fittings, Valves and Parts |
| ANSI/ASTM B84 | 精密電阻器合金電阻絲耐溫常數測試方法 | Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors |
| ANSI/ASTM B852 | 薄鋼板連續熱浸鍍鋅用鋅合金規范 | Specification for Zinc Alloys (Cgg) for Continuous Hot-Dip Galvanizing of Sheet Steel |
| ANSI/ASTM B86 | 鋅合金壓模鑄件規范 | Specification for Zinc-Alloy Die Castings |
| ANSI/ASTM B860 | 熱浸鍍鋅用鋅母合金規范 | Specification for Zinc Master Alloys for Use in Hot Dip Galvanizing |
| ANSI/ASTM B865 | 沉淀硬化鎳銅鋁合金(UNS N05500)棒材、桿材、線材、鍛件和鍛坯規范 | Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy (UNS N05500) Bar, Rod, Wire, Forgings, and Forging Stock |
| ANSI/ASTM B872 | 沉淀硬化鎳鐵鉻鈷(Nb)鈦鋁合金(UNS N09908)板、薄板及帶材規范 | Specification for Precipitation-Hardening Nickel-Iron-Chromium-Columbium (NB)-Titanium-Aluminum Alloy (UNS NO9908) Plate, Sheet and Strip |
| ANSI/ASTM B880 | 鎳、鎳合金及鈷合金化學檢驗分析限值一般要求規范 | Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys and Cobalt Alloys |
| ANSI/ASTM B894 | 鋅銅鋁合金壓模鑄件規范 | Specification for Zinc-Copper-Aluminum Alloy Die Castings |
| ANSI/ASTM B897 | 鋅及鋅合金特大鑄錠規范 | Specification for Zinc and Zinc Alloy Jumbo Ingot |
| ANSI/ASTM B899 | 有色金屬和合金術語 | Terminology Relating to Non-Ferrous Metals and Alloys |
| ANSI/ASTM B906 | 平軋鎳和鎳合金板材、薄板材和帶材的一般要求規范 | Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet and Strip |
| ANSI/ASTM B908 | 鋅合金鑄錠色碼使用慣例 | Practice for Use of Color Codes for Zinc Casting Alloy Ingot |
| ANSI/ASTM B914 | 鋼熱浸鍍鋅用鋅和鋅合金鑄錠顏色編碼慣例 | Practice for Color Codes on Zinc and Zinc Alloy Ingot for Use in Hot-Dip Galvanizing of Steel |
| ANSI/ASTM D3115 | 在高剪切力作用下潤滑劑對宇航合金的爆炸反應性的試驗方法(05.02) | Explosive Reactivity of Lubricants with Aerospace Alloys under High Shear, Method of Test for (05.02) |
| ANSI/ASTM D4340 | 排熱條件下發動機冷卻劑鑄造鋁合金腐蝕性測試方法 | Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants under Heat-Rejecting Conditions |
| ANSI/ASTM E1450 | 液態氦中結構合金的抗拉強度測試方法 | Test Method for Tension Testing of Structural Alloys in Liquid Helium |
| ANSI/ASTM E2250 | 水可混合金屬加工液中內毒素濃度測定 | Determination of Endotoxin Concentration in Water-Miscible Metalworking Fluids |
| ANSI/ASTM E866 | 黏結在蜂窩結構防護板上的鋁合金防腐粘結底層膠粘材料規范 | Specification for Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to be Adhesively Bonded in Honeycomb Shelter Panels (04.11) |
| ANSI/ASTM F1182 | 陽極鍍鋅合金規范 | Specification for Anodes, Sacrificial Zinc Alloy |
| ANSI/ASTM F1545 | 帶塑料內襯的鐵合金管、配件和法蘭規范 | Specification for Plastic-Lined Ferrous Metal Pipe, Fittings and Flanges |
| ANSI/AWS A5.10 | 無藥皮鋁和鋁合金焊條和焊棒規范 | Bare Aluminum and Aluminum Alloy Welding Electrodes and Rods, Specification for |
| ANSI/AWS A5.10/A 5.10M | 裸鋁和鋁合金焊接電極和焊條規范 | Specification for Bare Aluminum and Aluminum-Alloy Welding Electrodes and Rods |
| ANSI/AWS A5.11-97/A 5.11M | 氣體保護金屬極電弧焊用鎳和鎳合金電焊條規范 | Nickel and Nickel-Alloy Welding Electrodes for Shielded Metal Arc Welding, Specification for |
| ANSI/AWS A5.12/A 5.12M | 電弧焊接和切割用鎢及鎢合金焊條 | Specification for Tungsten and Tungsten-Alloy Electrodes for Arc Welding and Cutting |
| ANSI/AWS A5.14/A 5.14M | 鎳和鎳合金裸焊條和焊棒規范 | Specification for Nickel and Nickel-Alloy Bare Welding Rods and Electrodes |
| ANSI/AWS A5.16/A 5.16M | 鈦和鈦合金電焊條和焊條規范 | Specification for Titanium and Titanium Alloy Welding Electrodes and Rods |
| ANSI/AWS A5.19 | 鎂合金焊條和焊棒 | Magnesium Alloy Welding Electrodes and Rods |
| ANSI/AWS A5.2/A 5.2M | 氧燃料氣焊接的碳鋼和低合金鋼棒材的規范 | Specification for Carbon and Low Alloy Steel Rods for Oxyfuel Gas Welding |
| ANSI/AWS A5.23/A 5.23M | 埋弧焊用低合金鋼電極和助熔劑規范 | Specification for Low-Alloy Steel Electrodes and Fluxes for Submerged Arc Welding |
| ANSI/AWS A5.24/A 5.24M | 鋯和鋯合金焊接電極和焊條規范 | Specification for Zirconium and Zirconium Alloy Welding Electrodes and Rods |
| ANSI/AWS A5.25/A.25M | 碳鋼和高強度低合金鋼電渣焊用自耗品規范 | Specification for Consumables Used for Electroslag Welding of Carbon and High-Strength Low-Alloy Steels |
| ANSI/AWS A5.26/A 5.26M | 碳鋼和高強度低合金鋼氣電焊用自耗品規范 | Specification for Consumables Used for Electrogas Welding of Carbon and High-Strength Low-Alloy Steels |
| ANSI/AWS A5.28/A 5.28M | 氣體保護電弧焊用低合金鋼焊條和焊棒 | Low-Alloy Steel Electrodes and Rods for Gas Shielded Arc Welding |
| ANSI/AWS A5.29/A 5.29M | 熔劑芯電弧焊用低合金鋼焊條的規范 | Specification for Low-Alloy Steel Electrodes for Flux Cored Arc Welding |
| ANSI/AWS A5.3 | 保護金屬電弧焊用鋁和鋁合金電極 | Aluminum and Aluminum Alloy Electrodes for Shielded Metal Arc Welding |
| ANSI/AWS A5.3/A 5.3M | 保護金屬電弧焊用鋁和鋁合金電極 | Aluminum and Aluminum Alloy Electrodes for Shielded Metal Arc Welding |
| ANSI/AWS A5.34/A 5.34M | 助熔劑芯電弧焊接用鎳合金電極的規范 | Specification for Nickel-Alloy Electrodes for Flux Cored Arc Welding |
| ANSI/AWS A5.5/A 5.5M | 屏蔽金屬電弧焊用低合金鋼電焊條的規范 | Specification for Low-Alloy Steel Electrodes for Shielded Metal Arc Welding |
| ANSI/AWS A5.7/A 5.7M | 銅和銅合金裸焊條和電焊條規范 | Copper and Copper-Alloy Bare Welding Rods, and Electrodes, Specification for |
| ANSI/AWS C1.4M/C 1.4 | 碳鋼和低合金鋼電阻焊規范 | Specification for Resistance Welding of Carbon and Low-alloy Steels |
| ANSI/AWS C2.18 | 鋁、鋅及其合金和復合物的帶有熱噴覆層的鋼的保護 | Protection of Steel with Thermal Sprayed Coatings of Aluminum and Zinc and their Alloys and Composites |
| ANSI/AWS C2.23/C 2.23M | 鋁、鋅及其合金的熱噴鍍層(金屬化處理)和鋼防腐蝕保護復合材料的應用規范 | Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys and Composites for the Corrosion Protection of Steel |
| ANSI/AWS D10.7 | 鋁和鋁合金管氣體保護電弧焊推薦慣例 | Gas Shielded Arc Welding of Aluminum and Aluminum Alloy Pipe, Recommended Practices for |
| ANSI/AWS D10.7M/D 10.7 | 鋁和鋁合金管氣體保護電弧焊推薦規程 | Gas Shielded Arc Welding of Aluminum and Aluminum Alloy Pipe, Recommended Practices for |
| ANSI/AWS G2.1M/G 2.1 | 鍛造鎳基合金指南 | Guide for the Joining of Wrought Nickel-Base Alloys |
| ANSI/AWS G2.4/G 2.4M | 鈦和鈦合金熔焊指南 | Guide for the Fusion Welding of Titanium and Titanium Alloys |
| ANSI/CSA LC4 | 用于燃?xì)馀渌拖到y(tǒng)的壓接銅和銅合金配件 | Press-Connect Copper and Copper Alloy Fittings for Use in Fuel Gas Distribution Systems (same as CSA 6.32) |
| ANSI/IPC/EIA J-STD-006A | 電子釬焊用電子級釬料合金及助熔和非助熔固體釬料的要求 | Requirements for Electronic Grade Solder Alloys and Fluxed and Non-Fluxed Solid Solders for Electronic Soldering Applications |
| ANSI/SAE J1268 | 碳素鋼和合金工字鋼的可淬透性帶 | Hardenability Bands for Carbon and Alloy H Steels |
| ANSI/SAE J404 | SAE合金鋼的化學成分 | Chemical Compositions of SAE Alloy Steels |
| ASME B16.18 | 鑄銅合金軟釬焊連接壓力管件 | (Cast copper alloy solder joint pressure fittings) |
| ASME B16.22 | 鍛銅和銅合金釬焊壓力配件 | (Wrought copper and copper alloy solder joint pressure fittings) |
| ASME B16.23 | DWV類鑄銅合金釬焊連接排水管件 | (Cast copper alloy solder joint drainage fittings: DWV) |
| ASME B16.24 | 150、300、400、600、900、1500和2500 類鑄銅合金管法蘭和法蘭配件 | (Cast copper alloy pipe flanges and flanged fittings: Classes 150, 300, 400, 600, 900, 1500, and 2500) |
| ASME B16.26 | 青銅擴口管用鑄銅合金配件 | (Cast copper alloy fittings for flared copper tubes) |
| ASME B16.29 | DWV類可鍛銅和可鍛銅合金釬焊連接排水管接頭 | (Wrought copper and wrought copper alloy solder joint drainage fittings - DWV) |
| ASME B16.50 | 鍛造銅及銅合金硬焊結合壓力配件 | (Wrought copper and copper alloy braze-joint pressure fittings) |
| ASME B31.3 Cases NO. 2 | 壓力管道用套管規程.套管141:在ANSI/ASME B 31.3管道標準中鋁合金法蘭的使用規則 | (Cases code for pressure piping - Case 141: Rules for use of aluminium alloy flanges in ANSI/ASME B 31.3 piping) |
| ASTM A 1000 | 特制彈簧級碳鋼及合金鋼絲標準規范 | Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality |
| ASTM A 1002 | 鎳鋁有序合金鑄件的標準規范 | Standard Specification for Castings, Nickel-Aluminum Ordered Alloy |
| ASTM A 1008/A 1008Ma | 固溶淬火和燒固淬火的冷軋、碳鋼、結構鋼、高強度低合金鋼、可加工性改善的高強度低合金鋼薄板材的標準規范 | Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable |
| ASTM A 1011/A 1011M | 熱軋、碳鋼、結構鋼、高強度低合金鋼、可加工性改善的高強度低合金鋼和超高強度鋼薄板材和帶材的標準規范 | Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength |
| ASTM A 1012 | 無縫和焊接鐵素體、奧氏體和雙合金鋼冷凝器和帶整體散熱片的熱交換器管的標準規范 | Standard Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins |
| ASTM A 1016/A 1016Ma | 鐵素體合金鋼管、奧氏體合金鋼管和不銹鋼管一般要求的標準規范 | Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes |
| ASTM A 1017/A 1017M | 鉻鉬鎢合金鋼壓力容器板材的標準規范 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten |
| ASTM A 1018/A 1018M | 熱軋、碳素鋼、商品鋼、拉制鋼、結構鋼、高強度低合金鋼、可加工性改善的高強度低合金鋼和超高強度鋼薄板材 | Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength |
| ASTM A 102 | 釩鐵合金的標準規范 | Standard Specification for Ferrovanadium |
| ASTM A 1025 | 鐵合金一般要求的標準規范 | Standard Specification for Ferroalloys, General Requirements |
| ASTM A 1031 | 熱軋合金鋼、拉制鋼和結構鋼薄板和帶材、特厚卷材的標準規范 | Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled |
| ASTM A 1033 | 亞共析碳鋼和低合金鋼相位變換的定量測量和報告的標準規程 | Standard Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations |
| ASTM A 1040 | 規范鍛造碳素鋼、低合金鋼、合金鋼統一的標準等級組分的標準指南 | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Carbon, Low-Alloy, and Alloy Steels |
| ASTM A 1041/A 1041M | 較高強度鉻-鉬-鎢合金鋼壓力容器板的標準規范 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Higher Strength Chromium-Molybdenum-Tungsten |
| ASTM A 1046/A 1046M | 用熱浸工藝測定鋅鋁鎂合金涂覆的薄鋼板的標準規范 | Standard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process |
| ASTM A 1048/A 1048M | 高溫工作的高強度鉻鉬鎢合金鋼壓力容器鍛件的標準規范 | Standard Specification for Pressure Vessel Forgings, Alloy Steel, Higher Strength Chromium-Molybdenum-Tungsten for Elevated Temperature Service |
| ASTM A 108 | 冷加工碳素鋼和合金鋼棒材的標準規范 | Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished |
| ASTM A 132 | 鉬鐵合金標準規范 | Standard Specification for Ferromolybdenum |
| ASTM A 144 | 鎢鐵合金規范 | Specification for Ferrotungsten |
| ASTM A 182/A 182Ma | 高溫設備用鍛制或軋制合金和不銹鋼管法蘭、鍛制配件、閥門及零件的標準規范 | Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service |
| ASTM A 193/A 193M | 高溫或高壓設備及其他特殊用途的合金鋼和不銹鋼螺栓連接材料用標準規范 | Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or High Pressure Service and Other Special Purpose Applications |
| ASTM A 194/A 194Ma | 高壓或高溫設備或高壓高溫設備的螺栓用碳素鋼與合金鋼螺母的標準規范 | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both |
| ASTM A 203/A 203M | 壓力容器用鎳合金鋼板的標準規范 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel |
| ASTM A 204/A 204M | 壓力容器用鉬合金鋼板的標準規范 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum |
| ASTM A 209/A 209M | 鍋爐和過熱器用無縫碳鉬合金鋼管標準規范 | Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes |
| ASTM A 213/A 213Ma | 無縫鐵素體和奧氏體合金鋼鍋爐、過熱器和熱交換器管的標準規范 | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes |
| ASTM A 217/A 217M | 適合高溫設備的承壓部件用合金鋼和馬氏體不銹鋼鑄件的標準規范 | Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service |
| ASTM A 225/A 225M | 壓力容器用錳釩鎳合金鋼板標準規范 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel |
| ASTM A 231/A 231M | 鉻釩合金鋼彈簧絲的標準規范 | Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire |
| ASTM A 232/A 232M | 閥簧級鉻礬合金鋼的標準規范 | Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire |
| ASTM A 234/A 234M | 中溫與高溫設備用鍛制碳素鋼和合金鋼管道配件的標準規范 | Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service |
| ASTM A 242/A 242M | 高強度低合金結構鋼標準規范 | Standard Specification for High-Strength Low-Alloy Structural Steel |
| ASTM A 250/A 250M | 電阻焊接鐵素體合金鋼鍋爐和過熱器管的標準規范 | Standard Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes |
| ASTM A 288 | 渦輪發電機磁性定位環用碳素鋼和合金鋼鍛件 | Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators |
| ASTM A 289/A 289M | 發電機用無磁檔圈用合金鋼鍛件的標準規范 | Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators |
| ASTM A 29/A 29M | 熱鍛碳素鋼棒和合金鋼棒一般要求的標準規范 | Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for |
| ASTM A 290/A 290M | 減速齒輪用碳素鋼及合金鋼鍛件的標準規范 | Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears |
| ASTM A 291/A 291M | 小齒輪、齒輪和減速齒輪軸用碳素鋼和合金鋼鍛件的標準規范 | Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears |
| ASTM A 302/A 302M | 壓力容器用錳鉬和錳鉬鎳合金鋼板的標準規范 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel |
| ASTM A 304 | 有頂端淬火硬性要求的碳鋼及合金鋼棒材的標準規范 | Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements |
| ASTM A 308/A 308M | 經熱浸工藝涂層的鍍鉛錫(鉛錫合金)鐵薄板標準規范 | Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process |
| ASTM A 320/A 320Ma | 低溫設備用合金鋼和不銹鋼螺栓材料的標準規范 | Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for Low-Temperature Service |
| ASTM A 322 | 標準級合金鋼棒材的標準規范 | Standard Specification for Steel Bars, Alloy, Standard Grades |
| ASTM A 324 | 鈦鐵合金 | Standard Specification for Ferrotitanium |
| ASTM A 334/A 334Ma | 低溫設備用無縫和焊接碳素和合金鋼管的標準規范 | Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service |
| ASTM A 335/A 335M | 高溫設備用無縫鐵素體合金鋼管的標準規范 | Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service |
| ASTM A 336/A 336M | 壓力和高溫部件用合金鋼鍛件的標準規范 | Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts |
| ASTM A 350/A 350Ma | 管道部件用要求切口韌性試驗的碳素鋼與低合金鋼鍛件的標準規范 | Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components |
| ASTM A 350/A 350Mc | 管道部件用要求切口韌性試驗的碳素鋼與低合金鋼鍛件的標準規范 | Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components |
| ASTM A 353/A 353M | 壓力容器用經二次正火及回火處理的含9％鎳的合金鋼板標準規范 | Standard Specification for Pressure Vessel Plates, Alloy Steel, 9 Percent Nickel, Double-Normalized and Tempered |
| ASTM A 354 | 淬火和回火合金鋼螺栓、螺柱和其它外螺紋緊固件的標準規范 | Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners |
| ASTM A 355 | 摻氮用合金鋼棒 | Standard Specification for Steel Bars, Alloys, for Nitriding |
| ASTM A 356/A 356M | 汽輪機用厚壁不銹鋼、低合金鋼、碳素鋼和鋼鑄件標準規范 | Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines |
| ASTM A 369/A 369M | 高溫設備用鍛制和鏜加工碳素鋼管和鐵素體合金鋼管標準規范 | Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service |
| ASTM A 372/A 372M | 薄壁壓力容器用碳鋼和合金鋼鍛件的標準規范 | Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels |
| ASTM A 387/A 387Ma | 壓力容器用鉻鉬合金鋼板的標準規范 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum |
| ASTM A 391/A 391M | 80度(角度)合金鋼鏈條標準規范 | Standard Specification for Grade 80 Alloy Steel Chain |
| ASTM A 401/A 401M | 鉻硅合金鋼絲的標準規范 | Standard Specification for Steel Wire, Chromium-Silicon Alloy |
| ASTM A 420/A 420M | 低溫設備用鍛造碳鋼和合金鋼的管道配件用標準規范 | Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service |
| ASTM A 423/A 423M | 無縫和電焊低合金鋼管的標準規范 | Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes |
| ASTM A 426/A 426M | 高溫設備用離心澆鑄鐵素體合金鋼管的標準規范 | Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service |
| ASTM A 427 | 冷軋和熱軋用可鍛合金鋼軋輥標準規范 | Standard Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction |
| ASTM A 434 | 熱鍛或冷精軋經淬火及回火的合金鋼棒標準規范 | Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered |
| ASTM A 437/A 437M | 高溫用經特殊處理的渦輪型合金鋼螺栓材料標準規范 | Standard Specification for Alloy-Steel Turbine-Type Bolting Material Specially Heat Treated for High-Temperature Service |
| ASTM A 447/A 447M | 高溫用鎳鉻鐵合金鋼鑄件(25-12級)的標準規范 | Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service |
| ASTM A 450/A 450Ma | 碳素鋼管、鐵素體合金鋼管及奧氏體合金鋼管一般要求的標準規范 | Standard Specification for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes |
| ASTM A 470/A 470M | 渦輪轉子和軸用經真空處理的碳素鋼和合金鋼鍛件的標準規范 | Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts |
| ASTM A 471 | 渦輪轉子盤和葉輪用真空處理合金鋼鍛件的標準規范 | Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels |
| ASTM A 482 | 鉻鐵合金硅的標準規范 | Standard Specification for Ferrochrome-Silicon |
| ASTM A 483 | 硅錳合金標準規范 | Standard Specification for Silicomanganese |
| ASTM A 49 | 熱處理碳素鋼連接棒材、微合金連接棒材和法蘭連接棒材的標準規范 | Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars |
| ASTM A 490 | 最小抗拉強度為150ksi的熱處理合金鋼結構螺栓標準規范 | Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength |
| ASTM A 494/A 494M | 鎳和鎳合金鑄件的標準規范 | Standard Specification for Castings, Nickel and Nickel Alloy |
| ASTM A 495 | 硅鈣合金的標準規范 | Standard Specification for Calcium-Silicon Alloys |
| ASTM A 505 | 熱軋和冷軋合金鋼薄板與帶材一般要求的標準規范 | Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for |
| ASTM A 506 | 熱軋和冷軋合金鋼和結構合金鋼薄板材與帶材的標準規范 | Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled |
| ASTM A 507 | 熱軋和冷軋拉絲合金鋼片材和帶材的標準規范 | Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled |
| ASTM A 508/A 508Mb | 壓力容器用經淬火和回火真空處理的碳素鋼與合金鋼鍛件的標準規范 | Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels |
| ASTM A 513 | 電阻焊碳素鋼與合金鋼機械鋼管的標準規范 | Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing |
| ASTM A 514/A 514M | 焊接用經淬火與回火的高屈服強度合金鋼板的標準規范 | Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding |
| ASTM A 517/A 517M | 壓力容器用經回火與淬火的高強度合金鋼板 | Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered |
| ASTM A 519 | 無縫碳鋼和合金鋼機械裝管用標準規范 | Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing |
| ASTM A 522/A 522M | 低溫設備用鍛制或軋制含鎳8%和9%的合金鋼法蘭、配件、閥門和零件的標準規范 | Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service |
| ASTM A 530/A 530Ma | 專用碳素鋼和合金鋼管一般要求的標準規范 | Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe |
| ASTM A 533/A 533M | 壓力容器用經回火和淬火的錳鉬及錳鉬鎳合金鋼板 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel |
| ASTM A 540/A 540M | 特殊用合金鋼螺栓材料的標準規范 | Standard Specification for Alloy-Steel Bolting Materials for Special Applications |
| ASTM A 541/A 541M | 壓力容器部件用經淬火和回火的碳素鋼及合金鋼鍛件的標準規范 | Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components |
| ASTM A 542/A 542M | 壓力容器用經回火和淬火的鉻鉬、鉻鉬釩及鉻鉬釩鈦硼合金鋼板的標準規范 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium |
| ASTM A 543/A 543M | 壓力容器用經回火和淬火的鎳鉻鉬合金鋼板的標準規范 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum |
| ASTM A 550 | 鈮鐵合金的標準規范 | Standard Specification for Ferrocolumbium |
| ASTM A 553/A 553M | 壓力容器用經淬火和回火的含8%和9%鎳的合金鋼板的標準規范 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 8 and 9 Percent Nickel |
| ASTM A 560/A 560M | 鉻鎳合金鑄件的標準規范 | Standard Specification for Castings, Chromium-Nickel Alloy |
| ASTM A 562/A 562M | 玻璃或擴散金屬鍍層的壓力容器用錳鈦合金碳素鋼板 | Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings |
| ASTM A 563 | 碳和合金鋼螺母標準規范 | Standard Specification for Carbons and Alloy Steel Nuts |
| ASTM A 563M | 碳素鋼和合金鋼螺母(米制)用標準規范 | Standard Specification for Carbon and Alloy Steel Nuts (Metric) |
| ASTM A 568/A 568M | 高強度、低合金、熱軋和冷軋?zhí)妓乇“邃撘话阋蟮臉?biāo)準規范 | Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for |
| ASTM A 572/A 572M | 高強度低合金鈳釩結構鋼標準規范 | Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel |
| ASTM A 574 | 合金鋼內六角螺釘標準規范 | Standard Specification for Alloy Steel Socket-Head Cap Screws |
| ASTM A 574M | 合金鋼內六角螺釘(米制)標準規范 | Standard Specification for Alloy Steel Socket-Head Cap Screws [Metric] |
| ASTM A 579/A 579Ma | 超強度合金鋼鍛件的標準規范 | Standard Specification for Superstrength Alloy Steel Forgings |
| ASTM A 588/A 588M | 4英寸(100mm)厚、最小屈服點50ksi(345MPa)的高強度低合金結構鋼標準規范 | Standard Specification for High-Strength Low-Alloy Structural Steel with 50 ksi [345 MPa] Minimum Yield Point to 4-in. [100-mm] Thick |
| ASTM A 592/A 592M | 壓力容器用經回火和淬火的高強度低合金鋼鍛制配件和零件標準規范 | Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Fittings and Parts for Pressure Vessels |
| ASTM A 595/A 595M | 建筑用錐形、高強度低合金或低碳鋼管的標準規范 | Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use |
| ASTM A 606 | 改進防大氣腐蝕性的熱軋和冷軋高強度低合金鋼薄板和帶材的標準規范 | Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance |
| ASTM A 608/A 608M | 高溫壓力設備用離心鑄造的鐵鉻鎳高合金鋼管標準規范 | Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperature |
| ASTM A 609/A 609M | 碳素鋼,低合金鋼和馬氏體不銹鋼鑄件及其超聲波檢驗 | Castings, Carbon, Low-Alloy and Martensitic Stainless Steel, Ultrasonic Examination Thereof |
| ASTM A 610 | 尺寸測量用鐵合金的取樣和試驗的標準試驗方法 | Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size |
| ASTM A 618/A 618M | 熱塑焊接和無縫高強度低合金結構鋼管的標準規范 | Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing |
| ASTM A 633/A 633M | 正火的高強度低合金結構鋼板標準規范 | Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates |
| ASTM A 635/A 635M | 高強度低合金和可加工性改善的高強度低合金熱軋?zhí)妓亟Y(jié)構薄板鋼、帶鋼和重型粗卷鋼一般要求的標準規范 | Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for |
| ASTM A 638/A 638M | 高溫設備用沉積硬化鐵基超級合金棒、鍛件及鍛坯料標準規范 | Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service |
| ASTM A 645/A 645M | 經特殊熱處理的5%鎳合金鋼壓力容器板的標準規范 | Standard Specification for Pressure Vessel Plates, Five Percent Nickel Alloy Steel, Specially Heat Treated |
| ASTM A 646/A 646M | 航行器和航空器鍛件用優質合金鋼大方坯和坯段的標準規范 | Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings |
| ASTM A 653/A 653M | 用熱浸處理鍍鋅或鍍鋅鐵合金鋼薄板的標準規范 | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process |
| ASTM A 656/A 656M | 具有改良可模鍛性的熱軋結構鋼制高強度低合金板標準規范 | Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability |
| ASTM A 668/A 668M | 一般工業用碳素鋼和合金鋼鍛件的標準規范 | Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use |
| ASTM A 678/A 678M | 淬火和回火的碳素鋼和高強度低合金結構鋼板的標準規范 | Standard Specification for Quenched-and-Tempered Carbon and High-Strength Low-Alloy Structural Steel Plates |
| ASTM A 681 | 工具鋼合金的標準規范 | Standard Specification for Tool Steels Alloy |
| ASTM A 689 | 彈簧用碳素鋼及合金鋼棒的標準規范 | Standard Specification for Carbon and Alloy Steel Bars for Springs |
| ASTM A 690/A 690M | 在海洋環境中使用耐大氣腐蝕的高強度低鎳銅合金工字形磷鋼樁和薄板磷鋼樁用標準規范 | Standard Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments |
| ASTM A 691 | 高溫下高壓裝置用電熔焊碳素鋼和合金鋼管的標準規范 | Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures |
| ASTM A 694/A 694M | 高壓傳輸設備用管法蘭、配件、閥門及零件用碳素鋼及合金鋼鍛件的標準規范 | Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service |
| ASTM A 706/A 706Ma | 混凝土加筋用低合金異形鋼筋和無節鋼筋的標準規范 | Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement |
| ASTM A 707/A 707M | 低溫設備用鍛制碳素鋼和合金鋼法蘭的標準規范 | Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service |
| ASTM A 710/A 710M | 沉淀硬化低碳鎳-銅-鉻-鉬-鈮合金結構鋼板的標準規范 | Standard Specification for Precipitation-Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates |
| ASTM A 712 | 軟磁性合金電阻率的標準試驗方法 | Standard Test Method for Electrical Resistivity of Soft Magnetic Alloys |
| ASTM A 714 | 高強度低合金焊接和無縫鋼管的標準規范 | Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe |
| ASTM A 723/A 723M | 高強度壓力元件用合金鋼鍛件的標準規范 | Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application |
| ASTM A 729/A 729M | 公共交通和電氣鐵路設施用熱處理的合金鋼輪軸的標準規范 | Standard Specification for Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service |
| ASTM A 732/A 732M | 一般用途熔模鑄造碳鋼和低合金鋼及高溫用高強度鈷合金鋼鑄件標準規范 | Standard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures |
| ASTM A 734/A 734Ma | 經淬火和回火的合金鋼與高強度低合金鋼壓力容器板標準規范 | Standard Specification for Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel, Quenched-and-Tempered |
| ASTM A 735/A 735M | 中溫和低溫壓力容器用低碳錳鉬鈳合金鋼板的標準規范 | Standard Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for Moderate and Lower Temperature Service |
| ASTM A 736/A 736M | 壓力容器用低碳時效硬化的鎳銅鉻鉬鈮和鎳銅錳鉬鈮合金鋼板的標準規范 | Standard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium and Nickel-Copper-Manganese-Molybdenum-Columbium Alloy Steel |
| ASTM A 737/A 737M | 高強度低合金鋼壓力容器板的標準規范 | Standard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel |
| ASTM A 739a | 高溫或加壓部件或高溫加壓部件用熱軋合金鋼棒標準規范 | Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both |
| ASTM A 744/A 744M | 嚴酷條件下使用的耐腐蝕鎳鉻鐵合金鑄件的標準規范 | Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service |
| ASTM A 749/A 749M | 熱軋高強度碳素低合金鋼帶材的標準規范 | Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for |
| ASTM A 752 | 合金鋼條和粗圓鋼絲的標準規范 | Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel |
| ASTM A 752M | 合金鋼條和粗圓鋼絲(米制)一般要求的標準規范 | Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel [Metric] |
| ASTM A 753 | 煅制鎳鐵軟磁合金標準規范 | Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080) |
| ASTM A 765/A 765M | 符合強制韌性要求的碳素鋼和低合金鋼壓力容器部件鍛件的標準規范 | Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements |
| ASTM A 768/A 768M | 渦輪機轉子及軸用經真空處理的含鉻12%的合金鋼鍛件的標準規范 | Standard Specification for Vacuum-Treated 12 % Chromium Alloy Steel Forgings for Turbine Rotors and Shafts |
| ASTM A 781/A 781M | 一般工業用鋼鑄件及合金鑄件通用要求的標準規范 | Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use |
| ASTM A 782/A 782M | 經淬火和回火的錳鉻鉬硅鋯合金鋼壓力容器板的標準規范 | Standard Specification for Pressure-Vessel Plates, Quenched-and-Tempered, Manganese-Chromium-Molybdenum-Silicon Zirconium Alloy Steel |
| ASTM A 786/A 786M | 熱軋制碳素鋼、低合金鋼、高強度低合金鋼及合金鋼樓板的標準規范 | Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates |
| ASTM A 792/A 792Ma | 經熱浸工藝涂層55%鋁鋅合金鐵薄板材標準規范 | Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process |
| ASTM A 800/A 800M | 奧氏體合金鋼鑄件中鐵素體含量估算的標準實施規程 | Standard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof |
| ASTM A 801 | 鍛造鐵-鈷高磁飽和合金的標準規范 | Standard Specification for Wrought Iron-Cobalt High Magnetic Saturation Alloys (UNS R30005 and K92650) |
| ASTM A 829/A 829M | 合金結構鋼板的標準規范 | Standard Specification for Alloy Structural Steel Plates |
| ASTM A 832/A 832M | 壓力容器用鉻鉬釩合金鋼板的標準規范 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium |
| ASTM A 835 | 鐵合金與附加合金的尺寸的標準規范 | Standard Specification for Sizes of Ferroalloys and Alloy Additives |
| ASTM A 835/A 835M | 鐵合金和合金添加劑尺寸的標準規范 | Standard Specification for Sizes of Ferroalloys and Alloy Additives |
| ASTM A 837/A 837M | 滲碳用合金鋼鍛件標準規范 | Standard Specification for Steel Forgings, Alloy, for Carburizing Applications |
| ASTM A 838 | 繼電器用易切鐵素體不銹軟磁合金棒標準規范 | Standard Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloy Bar for Relay Applications |
| ASTM A 844/A 844M | 壓力容器用直接淬火加工的含鎳9%的合金鋼板標準規范 | Standard Specification for Steel Plates, 9 % Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process |
| ASTM A 847/A 847M | 提高耐大氣腐蝕性的冷成型焊接和無縫高強度低合金結構管道用標準規范 | Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance |
| ASTM A 852/A 852M | 最小屈服強度為70ksi(485MPa)厚度為4英寸(100mm)的經淬火和回火的低合金結構鋼板標準規范 | Standard Specification for Quenched and Tempered Low-Alloy Structural Steel Plate with 70 ksi [485 MPa] Minimum Yield Strength to 4 in. [100 mm] Thick |
| ASTM A 855/A 855M | 鋅-5%鋁-鈰合金涂覆鋼絲繩的標準規范 | Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Wire Strand |
| ASTM A 856/A 856M | 鋅-5%鋁-鈰合金涂覆碳素鋼絲的標準規范 | Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire |
| ASTM A 859/A 859M | 壓力容器部件用時效硬化合金鋼鍛件的標準規范 | Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components |
| ASTM A 860/A 860M | 鍛制高強度低合金鋼對縫焊接配件標準規范 | Standard Specification for Wrought High-Strength Low-Alloy Steel Butt-Welding Fittings |
| ASTM A 871/A 871M | 耐大氣腐蝕的高強度低合金結構鋼板標準規范 | Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance |
| ASTM A 873/A 873M | 壓力容器用鉻鉬合金鋼薄板和帶材 | Steel Sheet and Strip, Chromium-Molybdenum Alloy for Pressure Vessels |
| ASTM A 875/A 875M | 熱浸處理的鍍鋅-5%鋁合金的鋼薄板用標準規范 | Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process |
| ASTM A 877/A 877M | 閥簧級鉻硅合金鋼絲的標準規范 | Standard Specification for Steel Wire, Chromium-Silicon Alloy Valve Spring Quality |
| ASTM A 878/A 878M | 閥簧級改進的鉻硅合金鋼絲的標準規范 | Standard Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality |
| ASTM A 891/A 891M | 渦輪轉子轉盤和轉輪用沉淀硬化鐵基超耐熱合金鍛件的標準規范 | Standard Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels |
| ASTM A 90/A 90M | 帶鋅或鋅合金涂層的鋼鐵制品上涂層重量(質量)用標準試驗方法 | Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings |
| ASTM A 901 | 半成品型非晶形磁芯合金的標準規范 | Standard Specification for Amorphous Magnetic Core Alloys, Semi-Processed Types |
| ASTM A 906/A 906M | 懸掛式提升設備用等級 80 和 等級100 的合金鋼鏈?zhǔn)降跛鞯臉?biāo)準規范 | Standard Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting |
| ASTM A 909/A 909M | 一般工業用微量合金鋼鍛件用標準規范 | Standard Specification for Steel Forgings, Microalloy, for General Industrial Use |
| ASTM A 915/A 915M | 化學要求同鍛件類似的碳素鋼和合金鋼的標準規范 | Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades |
| ASTM A 918 | 要求標識各表面鍍層重量的電解液工藝處理的涂覆鋅-鎳合金鋼薄板材的標準規范 | Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface |
| ASTM A 920/A 920M | 具有機械特性,微合金,熱鍛,高質量鋼棒的標準規范 | Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties |
| ASTM A 920/A 920Ma | 具有機械特性的微合金熱鍛高質量鋼棒標準規范 | Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties |
| ASTM A 921/A 921M | 后熱鍛用微合金,高質量,熱鍛鋼棒的標準規范 | Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging |
| ASTM A 925 | 地面架空線用鋅-5%鋁-鈰合金涂覆鋼絞線的標準規范 | Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand |
| ASTM A 940/A 940M | 差溫?zé)崽幚碚婵仗幚礓撳懠?、合金鋼鍛件的?biāo)準規范 | Standard Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors |
| ASTM A 941a | 與鋼、不銹鋼、相關合金和鐵合金相關的術語 | Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys |
| ASTM A 945/A 945M | 改良可焊接性、可加工性及韌性用低碳限硫的高強度低合金結構鋼板的標準規范 | Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness |
| ASTM A 946 | 耐腐蝕和耐熱用鉻,鉻-鎳和硅合金鋼板,薄板和帶的標準規范 | Standard Specification for Chromium, Chromium-Nickel and Silicon Alloy Steel Plate, Sheet, and Strip for Corrosion and Heat Resisting Service |
| ASTM A 952/A 952M | 鍛造等級 80 和等級100 的合金鋼提升組件和焊接聯接桿的標準規范 | Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links |
| ASTM A 957/A 957M | 一般工業用共同要求的熔模鑄造鋼和合金的標準規范 | Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use |
| ASTM A 958 | 帶拉伸要求,化學要求的類似于標準鑄造等級的鑄鋼,碳和合金的標準規范 | Standard Specification for Steel Castings, Carbon and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades |
| ASTM A 968/A 968M | 耐腐蝕和耐熱設備用鉻、鉻鎳和硅合金鋼棒及型材的標準規范 | Standard Specification for Chromium, Chromium-Nickel, and Silicon Alloy Steel Bars and Shapes for Corrosion and Heat-Resisting Service |
| ASTM A 973/A 973M | 100級合金鋼鏈的標準規范 | Standard Specification for Grade 100 Alloy Steel Chain |
| ASTM A 983/A 983M | 中速柴油機用連續晶粒流動鍛造碳鋼及合金鋼曲軸的標準規范 | Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines |
| ASTM A 989/A 989M | 高溫設備用熱等靜壓壓制的合金鋼法蘭、配件、閥門和部件的標準規范 | Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service |
| ASTM A 99 | 錳鐵合金標準規范 | Standard Specification for Ferromanganese |
| ASTM A 990 | 防腐設備承壓部件用特殊控制的鐵鎳鉻及鎳合金鑄件的標準規范 | Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure Retaining Parts for Corrosive Service |
| ASTM A 994 | 鋼、不銹鋼及相關合金產品規范的編輯程序和格式的標準指南 | Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys |
| ASTM A 999/A 999Ma | 合金鋼及不銹鋼管一般要求的標準規范 | Standard Specification for General Requirements for Alloy and Stainless Steel Pipe |
| ASTM B 100a | 橋梁和其它結構用鍛制銅合金軸承和膨脹中厚板及薄板的標準規范 | Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use |
| ASTM B 102 | 鉛和錫合金壓模鑄件的標準規范 | Standard Specification for Lead- and Tin-Alloy Die Castings |
| ASTM B 105 | 電導體用硬拉銅合金線標準規范 | Standard Specification for Hard-Drawn Copper Alloy Wires for Electric Conductors |
| ASTM B 107/B 107M | 鎂合金擠壓棒材、桿材、型材、管材和線材用標準規范 | Standard Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire |
| ASTM B 108 | 鋁合金永久模型鑄造件的標準規范 | Standard Specification for Aluminum-Alloy Permanent Mold Castings |
| ASTM B 111/B 111M | 銅和銅合金無縫冷凝器管和孔塞坯料的標準規范 | Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock |
| ASTM B 122/B 122M | 銅鎳錫合金、銅鎳鋅合金(鎳銀)和銅鎳合金板材、薄板材、帶材及軋制棒材的標準規范 | Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar |
| ASTM B 124/B 124M | 銅和銅合金鍛造桿材、棒材和型材的標準規范 | Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes |
| ASTM B 127 | 鎳銅合金(UNS N04400)板、薄板和帶材的標準規范 | Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip |
| ASTM B 131 | 銅合金彈頭火帽殼的標準規范 | Standard Specification for Copper Alloy Bullet Jacket Cups |
| ASTM B 151/B 151M | 銅鎳鋅合金(鎳銀)和銅鎳桿材及棒材的標準規范 | Standard Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar |
| ASTM B 153 | 銅和銅合金管膨脹(針試驗)的標準試驗方法 | Standard Test Method for Expansion (Pin Test) of Copper and Copper-Alloy Pipe and Tubing |
| ASTM B 154 | 銅合金的硝酸亞汞試驗用標準試驗方法 | Standard Test Method for Mercurous Nitrate Test for Copper Alloys |
| ASTM B 163 | 無縫鎳和鎳合金冷凝器及熱交換器管的標準規范 | Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes |
| ASTM B 164 | 鎳銅合金桿材、棒材和線材標準規范 | Standard Specification for Nickel-Copper Alloy Rod, Bar, and Wire |
| ASTM B 165 | 無縫鎳銅合金管標準規范(UNS N04400) | Standard Specification for Nickel-Copper Alloy (UNS N04400)* Seamless Pipe and Tube |
| ASTM B 166 | 鎳鉻鐵合金(UNS N06600、N06601、N06603、N06690、N06693、N06025和N06045)和鎳鉻鈷鉬合金(UNS N06617)桿材 | Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, and N06045)* and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Rod, Bar, and Wire |
| ASTM B 167 | 鎳-鉻-鐵合金(UNS N06600、N06601、N06603、N06690、N06693、N06025和N06045)和鎳-鉻-鈷-鉬合金(UNS N06617 | Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, and N06045)* and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Seamless Pipe and Tube |
| ASTM B 168 | 鎳-鉻-鐵合金(UNS N06600、N06601、N06603、N06690、N06693、N06025和N06045)和鎳-鉻-鈷-鉬合金(UNS N06617 | Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, and N06045) and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Plate, Sheet, and Strip |
| ASTM B 171/B 171M | 壓力容器、冷凝器和熱交換器用銅合金板材和薄板材的標準規范 | Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers |
| ASTM B 176 | 銅合金壓模鑄件標準規范 | Standard Specification for Copper-Alloy Die Castings |
| ASTM B 179 | 全鑄造工藝的鑄錠和熔融成形鑄件中鋁合金的標準規范 | Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes |
| ASTM B 189 | 電氣用鉛涂覆和鉛合金涂覆軟銅線的標準規范 | Standard Specification for Lead-Coated and Lead-Alloy-Coated Soft Copper Wire for Electrical Purposes |
| ASTM B 19 | 銅鋅合金薄板材、帶材、板材、棒材和圓盤的標準規范 | Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks |
| ASTM B 194 | 銅鈹合金中厚板、薄板、帶材和軋制棒材標準規范 | Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar |
| ASTM B 196/B 196M | 銅鈹合金桿材和棒材的標準規范 | Standard Specification for Copper-Beryllium Alloy Rod and Bar |
| ASTM B 197/B 197M | 銅-鈹合金線的標準規范 | Standard Specification for Copper-Beryllium Alloy Wire |
| ASTM B 199 | 鎂合金永久鑄模鑄件用標準規范 | Standard Specification for Magnesium-Alloy Permanent Mold Castings |
| ASTM B 200 | 鋼及鐵合金表面鉛和鉛錫合金的電解沉積鍍層標準規范 | Standard Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys |
| ASTM B 206/B 206M | 銅-鎳-鋅(鎳銀)合金線和銅-鎳合金線用標準規范 | Standard Specification for Copper-Nickel-Zinc (Nickel Silver) Wire and Copper-Nickel Alloy Wire |
| ASTM B 208 | 砂型鑄造、硬模鑄造、離心鑄造和連續鑄造銅合金鑄件抗拉試驗用試樣制備的標準實施規范 | Standard Practice for Preparing Tension Test Specimens for Copper Alloy Sand, Permanent Mold, Centrifugal, and Continuous Castings |
| ASTM B 209 | 鋁和鋁合金薄板材和板材的標準規范 | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate |
| ASTM B 209M | 鋁和鋁合金薄板材和板材(米制)的標準規范 | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate [Metric] |
| ASTM B 210 | 拉制無縫鋁和鋁合金管的標準規范 | Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes |
| ASTM B 210M | 拉制鋁和鋁合金無縫管的標準規范(米制) | Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes [Metric] |
| ASTM B 211 | 鋁及鋁合金棒材、條材和線材標準規范 | Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire |
| ASTM B 211M | 鋁及鋁合金棒材、條材和線材(米制)標準規范 | Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire [Metric] |
| ASTM B 221 | 鋁和鋁合金擠壓棒材、桿材、金屬絲、型材和管道的標準規范 | Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes |
| ASTM B 221M | 鋁和鋁合金擠壓棒材、桿材、線材、型材和管材用標準規范(米制) | Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes [Metric] |
| ASTM B 23 | 白色金屬軸承合金(商品名稱為"巴氏合金")的標準規范 | Standard Specification for White Metal Bearing Alloys (Known Commercially as "Babbitt Metal") |
| ASTM B 234 | 冷凝器及熱交換器用鋁和鋁合金拉制無縫管的標準規范 | Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers |
| ASTM B 234M | 冷凝器及熱交換器用鋁和鋁合金拉制無縫管的標準規范(米制) | Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers [Metric] |
| ASTM B 240 | 鑄造和壓模鑄件用鑄錠結構中鋅和鋅鋁(ZA)合金的標準規范 | Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings |
| ASTM B 241/B 241M | 鋁及鋁合金無縫管和擠制管標準規范 | Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube |
| ASTM B 247a | 鋁和鋁合金壓模鍛件、手工鍛件和軋制環形鍛件的標準規范 | Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings |
| ASTM B 247Ma | 鋁和鋁合金壓模鍛件、手工鍛件和軋制環形鍛件的標準規范(米制) | Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings [Metric] |
| ASTM B 248 | 鍛制銅和銅合金厚板、薄板、帶材及軋制棒材的一般要求的標準規范 | Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar |
| ASTM B 248M | 鍛制銅和銅合金厚板材、薄板材、帶材及軋制棒材的一般要求的標準規范(米制) | Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar [Metric] |
| ASTM B 249/B 249M | 鍛制銅及銅合金棍材、棒材、型材和鍛件一般要求的標準規范 | Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings |
| ASTM B 250/B 250M | 可鍛銅合金線一般要求的標準規范 | Standard Specification for General Requirements for Wrought Copper Alloy Wire |
| ASTM B 251 | 鍛制無縫銅及銅合金管一般要求的標準規范 | Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube |
| ASTM B 252 | 電鍍層和轉化涂層用鋅合金壓模鑄件的制備 | Preparation of Zinc Alloy Die Castings for Electroplating and Conversion Coatings |
| ASTM B 253 | 電鍍用鋁合金的制備標準指南 | Standard Guide for Preparation of Aluminum Alloys for Electroplating |
| ASTM B 26/B 26M | 鋁合金砂型鑄件標準規范 | Standard Specification for Aluminum-Alloy Sand Castings |
| ASTM B 265b | 鈦及鈦合金帶材、薄板及板材標準規范 | Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate |
| ASTM B 271 | 銅基合金離心澆鑄件用標準規范 | Standard Specification for Copper-Base Alloy Centrifugal Castings |
| ASTM B 275 | 鑄造和鍛造某些有色金屬和合金的標準實施規程匯編 | Standard Practice for Codification of Certain Nonferrous Metals and Alloys, Cast and Wrought |
| ASTM B 276 | 硬質合金表觀孔隙率的標準試驗方法 | Standard Test Method for Apparent Porosity in Cemented Carbides |
| ASTM B 281 | 電鍍層和轉化鍍層用銅和銅基合金的制備 | Preparation of Copper and Copper-Base Alloys for Electroplating and Conversion Coatings |
| ASTM B 283 | 銅及銅合金壓模鍛件(熱壓)的標準規范 | Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed) |
| ASTM B 294 | 硬質合金硬度的測試方法 | Test Method for Hardness Testing of Cemented Carbides |
| ASTM B 296 | 鎂合金鑄件和鍛件回火名稱與符號的標準實施規程 | Standard Practice for Temper Designations of Magnesium Alloys, Cast and Wrought |
| ASTM B 308/B 308M | 鋁合金6061-T6標準結構型材標準規范 | Standard Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles |
| ASTM B 30a | 銅基合金錠的標準規范 | Standard Specification for Copper Alloys in Ingot Form |
| ASTM B 313/B 313M | 鋁和鋁合金圓焊接管標準規范 | Standard Specification for Aluminum and Aluminum-Alloy Round Welded Tubes |
| ASTM B 315 | 無縫銅合金管和莞標準規范 | Standard Specification for Seamless Copper Alloy Pipe and Tube |
| ASTM B 316/B 316M | 鉚接和冷鐓鋁及鋁合金線材與棒材標準規范 | Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods |
| ASTM B 317/B 317M | 電氣用鋁和鋁合金擠壓棒材、桿材、管和結構型材的標準規范 | Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor) |
| ASTM B 319 | 電鍍用鉛和鉛合金的制備 | Standard Guide for Preparation of Lead and Lead Alloys for Electroplating |
| ASTM B 327 | 制作鋅壓模合金用鋁合金硬化劑標準規范 | Standard Specification for Master Alloys Used in Making Zinc Die Casting Alloys |
| ASTM B 333 | 鎳鉬合金板、薄板和帶材標準規范 | Standard Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip |
| ASTM B 335 | 鎳鉬合金桿材標準規范 | Standard Specification for Nickel-Molybdenum Alloy Rod |
| ASTM B 338a | 冷凝器和熱交換器用無縫和焊接鈦與鈦合金管的標準規范 | Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers |
| ASTM B 344 | 電加熱元件用拉制或軋制鎳鉻及鎳鉻鐵合金標準規范 | Standard Specification for Drawn or Rolled Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating Elements |
| ASTM B 345/B 345M | 氣體和油傳輸和配送管道系統用鋁及鋁合金無縫管和無縫擠制管標準規范 | Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube for Gas and Oil Transmission and Distribution Piping Systems |
| ASTM B 348a | 鈦和鈦合金棒材和坯錠的標準規范 | Standard Specification for Titanium and Titanium Alloy Bars and Billets |
| ASTM B 350/B 350M | 核工業用鋯和鋯合金鑄錠的標準規范 | Standard Specification for Zirconium and Zirconium Alloy Ingots for Nuclear Application |
| ASTM B 351 | 核用熱軋和冷加工鋯及鋯合金棒材、桿材和線材標準規范 | Standard Specification for Hot-Rolled and Cold-Finished Zirconium and Zirconium Alloy Bars, Rod, and Wire for Nuclear Application |
| ASTM B 351/B 351M | 核設備用熱軋和冷加工鋯和鋯合金棒材、桿材和線材的標準規范 | Standard Specification for Hot-Rolled and Cold-Finished Zirconium and Zirconium Alloy Bars, Rod, and Wire for Nuclear Application |
| ASTM B 352 | 核用鋯及鋯合金板、帶材和板標準規范 | Standard Specification for Zirconium and Zirconium Alloy Sheet, Strip, and Plate for Nuclear Application |
| ASTM B 352/B 352M | 核設備用鋯和鋯合金薄板,帶和板材的標準規范 | Standard Specification for Zirconium and Zirconium Alloy Sheet, Strip, and Plate for Nuclear Application |
| ASTM B 353 | 核設施(核燃料覆層除外)用鍛制鋯及鋯合金無縫與焊接管的標準規范 | Standard Specification for Wrought Zirconium and Zirconium Alloy Seamless and Welded Tubes for Nuclear Service (Except Nuclear Fuel Cladding) |
| ASTM B 359/B 359M | 具有整體散熱葉片的冷凝器及熱交換器用無縫銅和銅合金管標準規范 | Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins |
| ASTM B 361 | 工廠加工的鍛制鋁及鋁合金焊接件的標準規范 | Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings |
| ASTM B 363a | 無縫和焊接的非合金鈦及鈦合金焊接配件標準規范 | Standard Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings |
| ASTM B 364 | 鉭及鉭合金鑄錠標準規范 | Standard Specification for Tantalum and Tantalum Alloy Ingots |
| ASTM B 365 | 鉭及鉭合金桿材和線材標準規范 | Standard Specification for Tantalum and Tantalum Alloy Rod and Wire |
| ASTM B 366b | 工廠制鍛造鎳和鎳合金配件的標準規范 | Standard Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings |
| ASTM B 367 | 鈦和鈦合金鑄件的標準規范 | Standard Specification for Titanium and Titanium Alloy Castings |
| ASTM B 369 | 銅-鎳合金鑄件標準規范 | Standard Specification for Copper-Nickel Alloy Castings |
| ASTM B 371/B 371M | 銅-鋅-硅合金桿材的標準規范 | Standard Specification for Copper-Zinc-Silicon Alloy Rod |
| ASTM B 372 | 無縫銅及銅合金矩形波導管標準規范 | Standard Specification for Seamless Copper and Copper-Alloy Rectangular Waveguide Tube |
| ASTM B 381a | 鈦和鈦合金鍛件的標準規范 | Standard Specification for Titanium and Titanium Alloy Forgings |
| ASTM B 386 | 鉬和鉬合金板、薄板、帶材和箔的標準規范 | Standard Specification for Molybdenum and Molybdenum Alloy Plate, Sheet, Strip, and Foil |
| ASTM B 387 | 鉬及鉬合金棒、條和線材 | Molybdenum and Molybdenum Alloy Bar, Rod and Wire |
| ASTM B 390 | 鎢硬質合金表觀晶粒尺寸及其分布的評定 | Evaluating Apparent Grain Size and Distribution of Cemented Tungsten Carbides |
| ASTM B 392 | 鈮和鈮合金棒材、桿材及線材標準規范 | Standard Specification for Niobium and Niobium Alloy Bar, Rod, and Wire |
| ASTM B 393 | 鈮和鈮合金帶材、薄板及板材的標準規范 | Standard Specification for Niobium and Niobium Alloy Strip, Sheet, and Plate |
| ASTM B 394 | 鈮和鈮合金無縫及焊接管標準規范 | Standard Specification for Niobium and Niobium Alloy Seamless and Welded Tubes |
| ASTM B 395/B 395M | U型彎曲無縫銅和銅合金熱交換器和冷凝器管的標準規范 | Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes |
| ASTM B 398/B 398M | 電氣用鋁合金6201-T81線的標準規范 | Standard Specification for Aluminum-Alloy 6201-T81 Wire for Electrical Purposes |
| ASTM B 399/B 399M | 同心絞捻的鋁合金6201-T81導線標準規范 | Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors |
| ASTM B 403 | 鎂合金熔模鑄件的標準規范 | Standard Specification for Magnesium-Alloy Investment Castings |
| ASTM B 406 | 硬質合金橫向斷裂強度的標準試驗方法 | Standard Test Method for Transverse Rupture Strength of Cemented Carbides |
| ASTM B 407 | 鎳鐵鉻合金無縫管的標準規范 | Standard Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube |
| ASTM B 408 | 鎳鐵鉻合金桿材和棒材用標準規范 | Standard Specification for Nickel-Iron-Chromium Alloy Rod and Bar |
| ASTM B 409 | 鎳鐵鉻合金厚板材、薄板材和帶材用標準規范 | Standard Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip |
| ASTM B 411 | 銅鎳硅合金桿材和棒材標準規范 | Standard Specification for Copper-Nickel-Silicon Alloy Rod and Bar |
| ASTM B 411/B 411M | 銅-鎳-硅合金桿材和棒材標準規范 | Standard Specification for Copper-Nickel-Silicon Alloy Rod and Bar |
| ASTM B 412 | 銅鎳硅合金絲標準規范 | Standard Specification for Copper-Nickel-Silicon Alloy Wire |
| ASTM B 422 | 銅-鋁-硅-鈷合金、銅-鎳-硅-鎂合金、銅-鎳-硅合金、銅-鎳-鋁-鎂合金和銅-鎳-錫合金薄板材和帶材的標準規范 | Standard Specification for Copper-Aluminum-Silicon-Cobalt Alloy, Copper-Nickel-Silicon-Magnesium Alloy, Copper-Nickel-Silicon Alloy, Copper-Nickel-Aluminum-Magnesium Alloy, and Copper-Nickel-Tin Alloy Sheet and Strip |
| ASTM B 423 | 鎳鐵鉻鉬銅合金無縫管道標準規范(UNS N08825 and N08221) | Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825 and N08221)* Seamless Pipe and Tube |
| ASTM B 424 | 鎳鐵鉻鉬銅合金(UNS N08825和UNS N08221)板材、薄板及帶材的標準規范 | Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221)* Plate, Sheet, and Strip |
| ASTM B 425 | 鎳鐵鉻鉬銅合金(UNS N08825和UNS N08221)桿材和棒材標準規范 | Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221) Rod and Bar |
| ASTM B 427 | 齒輪用青銅合金鑄件標準規范 | Standard Specification for Gear Bronze Alloy Castings |
| ASTM B 428 | 矩形和正方形銅和銅合金管扭轉角的標準試驗方法 | Standard Test Method for Angle of Twist in Rectangular and Square Copper and Copper Alloy Tube |
| ASTM B 429/B 429M | 擠壓型鋁合金管和管道的標準規范 | Standard Specification for Aluminum-Alloy Extruded Structural Pipe and Tube |
| ASTM B 432 | 包銅及包銅合金鋼板的標準規范 | Standard Specification for Copper and Copper Alloy Clad Steel Plate |
| ASTM B 434 | 鎳鉬鉻鐵合金(UNS N10003、UNS N10242)厚板材、薄板材和帶材用標準規范 | Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, UNS N10242)* Plate, Sheet, and Strip |
| ASTM B 443 | 鎳鉻鉬鈮合金(UNS N06625)和鎳鉻鉬硅合金(UNS N06219)板、薄板和帶材標準規范 | Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219)* Plate, Sheet, and Strip |
| ASTM B 444 | 鎳鉻鉬鈮合金(UNS N06625和UNS N06852)和鎳鉻鉬硅合金(UNS N06219)管道和管用標準規范 | Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube |
| ASTM B 446 | 鎳鉻鉬鈮合金(UNS N06625)、鎳鉻鉬硅合金(UNS N06219)和鎳鉻鉬鎢合金(UNS N06650)桿材和棒材標準規范 | Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625), Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219), and Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650)* Rod and Bar |
| ASTM B 453/B 453M | 銅鋅鉛合金(含鉛青銅)桿材、棒材和型材的標準規范 | Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and Shapes |
| ASTM B 455 | 銅鋅鉛合金(加鉛黃銅)擠壓型材的標準規范 | Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Extruded Shapes |
| ASTM B 462 | 腐蝕性鍛制或軋制的UNS N06030、N06022、N06035、N06200、N06059、N06686、N08020、N08024、N08026、N08367 | Specification for Forged or Rolled UNS N06030,N06022,N06035,N06200,N06059,N06686,N08020,N08024,N08026,N08367,N10276,N10665, N10675,N10629, N08031,N06045, N06025, & R20033 Alloy Pipe Flanges, Forged Fitting, & Values & Parts for Corrosive |
| ASTM B 463 | UNS N08020、UNS N08026和UNS N08024合金板、薄板和帶材標準規范 | Standard Specification for UNS N08020, UNS N08026, and UNS N08024 Alloy Plate, Sheet, and Strip |
| ASTM B 464 | 焊接的UNS NO8020、NO8024和NO8026合金管的標準規范 | Standard Specification for Welded UNS N08020, N08024, and N08026 Alloy Pipe |
| ASTM B 465 | 銅鐵合金板、薄板、帶材和軋制棒材標準規范 | Standard Specification for Copper-Iron Alloy Plate, Sheet, Strip, and Rolled Bar |
| ASTM B 466 | 無縫銅鎳合金管 | Seamless Copper-Nickel Pipe and Tube |
| ASTM B 468 | 焊接的UNS N08020、N08024和N08026合金管標準規范 | Standard Specification for Welded UNS N08020, N08024, and N08026 Alloy Tubes |
| ASTM B 469 | 壓力設備用無縫銅合金管 | Seamless Copper Alloy Tubes for Pressure Applications |
| ASTM B 471 | UNS NO8020、UNS NO8026和UNS NO8024鎳合金彈簧絲 | UNS N08020, UNS N08026 and UNS N08024 Nickel Alloy Spring Wire |
| ASTM B 472a | 鎳合金坯錠和再鍛用棒材的標準規范 | Standard Specification for Nickel Alloy Billets and Bars for Reforging |
| ASTM B 473 | UNS N08020、UNS N08024和UNS N08026鎳合金棒材和線材的標準規范 | Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire |
| ASTM B 475 | UNS N08020、UNS N08024和UNS N08026鎳合金圓編織線的標準規范 | Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Round Weaving Wire |
| ASTM B 477 | 金銀鎳電觸點合金標準規范 | Standard Specification for Gold-Silver-Nickel Electrical Contact Alloy |
| ASTM B 479 | 與食品接觸的和其它用途的撓性包裝材料用退火鋁及鋁合金箔標準規范 | Standard Specification for Annealed Aluminum and Aluminum-Alloy Foil for Flexible Barrier, Food Contact, and Other Applications |
| ASTM B 480 | 電鍍用鎂和鎂合金制備的標準指南 | Standard Guide for Preparation of Magnesium and Magnesium Alloys for Electroplating |
| ASTM B 481 | 電鍍用鈦和鈦合金的制備 | Preparation of Titanium and Titanium Alloys for Electroplating |
| ASTM B 482 | 電鍍用鎢和鎢合金的制備 | Preparation of Tungsten and Tungsten Alloys for Electroplating |
| ASTM B 483 | 普通拉制鋁及鋁合金管 | Aluminum and Aluminum-Alloy Drawn Tubes for General Purpose Applications |
| ASTM B 483/B 483M | 通用鋁和鋁合金拉制管的標準規范 | Standard Specification for Aluminum and Aluminum-Alloy Drawn Tubes for General Purpose Applications |
| ASTM B 491/B 491M | 通用鋁和鋁合金擠制圓管的標準規范 | Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications |
| ASTM B 493 | 鋯及鋯合金鍛件 | Zirconium and Zirconium Alloy Forgings |
| ASTM B 495 | 鋯及鋯合金鑄錠的標準規范 | Standard Specification for Zirconium and Zirconium Alloy Ingots |
| ASTM B 505/B 505M | 銅合金連續澆鑄件的標準規范 | Standard Specification for Copper Alloy Continuous Castings |
| ASTM B 511 | 鎳鐵鉻硅合金棒和型材標準規范 | Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Bars and Shapes |
| ASTM B 512 | 鎳鉻硅合金坯料和棒材標準規范 | Standard Specification for Nickel-Chromium-Silicon Alloy (UNS N08330) Billets and Bars |
| ASTM B 514 | 焊接的鎳鐵鉻合金管標準規范 | Standard Specification for Welded Nickel-Iron-Chromium Alloy Pipe |
| ASTM B 515 | 焊接的UNS N08120、UNS NO8800、UNS N08810和UNS NO8811合金管標準規范 | Standard Specification for Welded UNS N08120, UNS N08800, UNS N08810, and UNS N08811 Alloy Tubes |
| ASTM B 516 | 焊接的鎳鉻鐵合金(UNS N06600、UNS N06603、UNS N06025和UNS N06045)管標準規范 | Standard Specification for Welded Nickel-Chromium-Iron Alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045 Tubes) |
| ASTM B 517 | 焊接鎳鉻鐵合金(UNS N06600、UNS N06603、UNS N06025和UNS N06045)管的標準規范 | Standard Specification for Welded Nickel-Chromium-Iron-Alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045) Pipe |
| ASTM B 521 | 鉭和鉭合金無縫和焊接管標準規范 | Standard Specification for Tantalum and Tantalum Alloy Seamless and Welded Tubes |
| ASTM B 522 | 金銀鉑電接觸合金標準規范 | Standard Specification for Gold-Silver-Platinum Electrical Contact Alloy |
| ASTM B 523/B 523M | 無縫和焊接鋯及鋯合金管的標準規范 | Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Tubes |
| ASTM B 524/B 524M | 鋁合金芯加強的同心絞捻鋁導線標準規范 | Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Alloy Reinforced (ACAR, 1350/6201) |
| ASTM B 535 | 鎳鐵鉻硅合金(UNS N08330和N08332)無縫管道和管用標準規范 | Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Seamless Pipe and Tube |
| ASTM B 536 | 鎳-鐵-鉻-硅合金(UNS N08330和N08332)厚板材、薄板材和帶材的標準規范 | Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Plate, Sheet, and Strip |
| ASTM B 540 | 電觸點用鈀合金標準規范 | Standard Specification for Palladium Electrical Contact Alloy |
| ASTM B 541 | 電接觸用金合金標準規范 | Standard Specification for Gold Electrical Contact Alloy |
| ASTM B 546 | 電熔焊接鎳鉻鈷鉬合金(UNS N06617)、鎳鐵鉻硅合金(UNS N08330和UNS N08332)、鎳鉻鐵鋁合金(UNS N06603)、鎳 | Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe |
| ASTM B 547/B 547M | 成形的和電弧焊接的鋁及鋁合金圓管標準規范 | Standard Specification for Aluminum and Aluminum-Alloy Formed and Arc-Welded Round Tube |
| ASTM B 548 | 壓力容器用鋁合金板的超聲波檢驗的標準試驗方法 | Standard Test Method for Ultrasonic Inspection of Aluminum-Alloy Plate for Pressure Vessels |
| ASTM B 550/B 550M | 鋯和鋯合金棒材及線材的標準規范 | Standard Specification for Zirconium and Zirconium Alloy Bar and Wire |
| ASTM B 551/B 551M | 鋯和鋯合金帶材、薄板材和厚板材的標準規范 | Standard Specification for Zirconium and Zirconium Alloy Strip, Sheet, and Plate |
| ASTM B 557 | 鍛造和鑄造的鋁及鎂合金制品的抗拉試驗的標準試驗方法 | Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products |
| ASTM B 557M | 鍛造和鑄造鋁合金和鎂合金制品的抗拉測試的標準試驗方法(米制) | Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products [Metric] |
| ASTM B 558 | 電鍍用鎳合金的制備 | Preparation of Nickel Alloys for Electroplating |
| ASTM B 560 | 新的錫鉛合金的標準規范 | Standard Specification for Modern Pewter Alloys |
| ASTM B 563 | 電接觸用鈀銀銅合金標準規范 | Standard Specification for Palladium-Silver-Copper Electrical Contact Alloy |
| ASTM B 564a | 鎳合金鍛件用標準規范 | Standard Specification for Nickel Alloy Forgings |
| ASTM B 565 | 鋁和鋁合金鉚釘及冷鐓頭絲與棒材的剪切試驗的標準試驗方法 | Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods |
| ASTM B 570 | (UNS Nos. C17000和C17200)銅-鈹合金鍛件和擠壓件的標準規范 | Standard Specification for Copper-Beryllium Alloy (UNS Nos. C17000 and C17200) Forgings and Extrusions |
| ASTM B 573 | 鎳鉬鉻鐵合金(UNS N10003、N10242)棒材標準規范 | Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, N10242)* Rod |
| ASTM B 574 | 低碳鎳鉬鉻、低碳鎳鉻鉬、低碳鎳鉬鉻鉭、低碳鎳鉻鉬銅和低碳鎳鉻鉬鎢合金桿標準規范 | Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Rod |
| ASTM B 575 | 低碳鎳鉻鉬、低碳鎳鉻鉬銅、低碳鎳鉻鉬鉭和低碳鎳鉻鉬鎢合金板、薄板及帶材的標準規范 | Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Plate, Sheet, and Strip |
| ASTM B 579 | 錫鉛合金的電解沉積鍍層(焊接板) | Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate) |
| ASTM B 581 | 鎳鉻鐵鉬銅合金棒標準規范 | Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod |
| ASTM B 582 | 鎳鉻鐵鉬銅合金板、薄板及帶材標準規范 | Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip |
| ASTM B 584a | 一般用途銅合金砂型鑄造件的標準規范 | Standard Specification for Copper Alloy Sand Castings for General Applications |
| ASTM B 591 | 銅鋅錫和銅鋅錫鐵鎳合金板、薄板、帶材及軋制的棒材標準規范 | Standard Specification for Copper-Zinc-Tin and Copper-Zinc-Tin-Iron-Nickel Alloys Plate, Sheet, Strip, and Rolled Bar |
| ASTM B 592 | 銅鋅鋁鈷合金、銅鋅錫鐵板、薄板、帶材及軋制的棒材標準規范 | Standard Specification for Copper-Zinc-aluminum-Cobalt Alloy, Copper-Zinc-Tin-Iron Alloy Plate, Sheet, Strip, and Rolled Bar |
| ASTM B 593 | 銅合金彈簧材料彎曲疲勞試驗的標準試驗方法 | Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials |
| ASTM B 594 | 航空設備用鋁合金鍛制品超聲波檢驗的標準實施規程 | Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products for Aerospace Applications |
| ASTM B 596 | 金銅合金電接觸材料標準規范 | Standard Specification for Gold-Copper Alloy Electrical Contact Material |
| ASTM B 598 | 抗拉試驗中確定銅合金偏置屈服強度的標準實施規程 | Standard Practice for Determining Offset Yield Strength in Tension for Copper Alloys |
| ASTM B 599 | 鎳鐵鉻鉬鈳穩定合金板、薄板及帶材標準規范 | Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip |
| ASTM B 600 | 鈦及鈦合金表面的去垢和清洗 | Descaling and Cleaning Titanium and Titanium Alloy Surfaces |
| ASTM B 601 | 銅和銅合金用回火標志的標準分類.鍛造和鑄造 | Standard Classification for Temper Designations for Copper and Copper Alloys - Wrought and Cast |
| ASTM B 603 | 電熱元件用拉制或軋制鐵-鉻-鋁合金的標準規范 | Standard Specification for Drawn or Rolled Iron-Chromium-Aluminum Alloys for Electrical Heating Elements |
| ASTM B 605a | 錫鎳合金電解沉積鍍層標準規范 | Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy |
| ASTM B 606 | 鋼芯鋁和鋁合金導線用高強度鍍鋅(電鍍)鋼芯線的標準規范 | Standard Specification for High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced |
| ASTM B 611 | 硬質合金的耐磨性的試驗方法 | Test Method for Abrasive Wear Resistance of Cemented Carbides |
| ASTM B 614 | 鋯及鋯合金表面的除垢和清洗的標準實施規程 | Standard Practice for Descaling and Cleaning Zirconium and Zirconium Alloy Surfaces |
| ASTM B 617 | 電觸點貨幣銀合金標準規范 | Standard Specification for Coin Silver Electrical Contact Alloy |
| ASTM B 619 | 焊接的鎳和鎳鈷合金管的標準規范 | Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe |
| ASTM B 620 | 鎳鐵鉻鉬合金板、薄板及帶材標準規范 | Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Plate, Sheet, and Strip |
| ASTM B 621 | 鎳鐵鉻鉬合金棒材標準規范 | Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod |
| ASTM B 622 | 無縫鎳和鎳鈷合金管的標準規范 | Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube |
| ASTM B 624 | 電子用高強度高傳導率銅合金線的標準規范 | Standard Specification for High-Strength, High-Conductivity Copper-Alloy Wire for Electronic Application |
| ASTM B 626 | 焊接鎳和鎳鈷合金管標準規范 | Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Tube |
| ASTM B 628 | 銀銅低共熔電觸頭合金標準規范 | Standard Specification for Silver-Copper Eutectic Electrical Contact Alloy |
| ASTM B 629 | 電鍍用鉬和鉬合金的制備 | Preparation of Molybdenum and Molybdenum Alloys for Electroplating |
| ASTM B 632/B 632M | 鋁合金軋制支撐板標準規范 | Standard Specification for Aluminum-Alloy Rolled Tread Plate |
| ASTM B 637 | 高溫設備用淀積硬化鎳合金棒材、鍛件和鍛坯的標準規范 | Standard Specification for Precipitation-Hardening Nickel Alloy Bars, Forgings, and Forging Stock for High-Temperature Service |
| ASTM B 639 | 高溫用沉積硬化鈷(UNS R30155 和 UNS R30816)合金條材、棒材、鍛件和鍛造坯定的標準規范 | Standard Specification for Precipitation Hardening Cobalt-Containing Alloys (UNS R30155 and UNS R30816) Rod, Bar, Forgings, and Forging Stock for High-Temperature Service |
| ASTM B 643 | 銅鈹合金無縫管標準規范 | Standard Specification for Copper-Beryllium Alloy Seamless Tube |
| ASTM B 644 | 銅合金添加劑的標準規范 | Standard Specification for Copper Alloy Addition Agents |
| ASTM B 645 | 鋁合金線性彈性平面應變斷裂韌性測試的標準實施規程 | Standard Practice for Linear-Elastic Plane-Strain Fracture Toughness Testing of Aluminum Alloys |
| ASTM B 646a | 鋁合金斷裂韌性試驗的標準實施規程 | Standard Practice for Fracture Toughness Testing of Aluminum Alloys |
| ASTM B 647 | 用維氏硬度儀測定鋁合金壓痕硬度的試驗方法 | Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage |
| ASTM B 648 | 用巴氏壓痕儀測定鋁合金壓痕硬度的標準試驗方法 | Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor |
| ASTM B 649 | 鎳鐵鉻鉬銅氮低碳合金(UNS N08925、UNS N08031、UNS N08354和UNS N08926)、鉻鎳鐵氮低碳合金(UNS R20033)棒 | Standard Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, UNS N08354, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire, and Ni-Cr-Fe-Mo-N Alloy (UNS N08936) Wire |
| ASTM B 652/B 652M | 鈮鉿合金鑄錠標準規范 | Standard Specification for Niobium-Hafnium Alloy Ingots |
| ASTM B 653/B 653M | 無縫和焊接鋯和鋯合金焊接配件的標準規范 | Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Welding Fittings |
| ASTM B 654/B 654M | 鈮鉿合金箔、薄板材、帶材和板材的標準規范 | Standard Specification for Niobium-Hafnium Alloy Foil, Sheet, Strip, and Plate |
| ASTM B 655/B 655M | 鈮鉿合金棒材、桿材和線材標準規范 | Standard Specification for Niobium-Hafnium Alloy Bar, Rod, and Wire |
| ASTM B 657 | 硬質合金中微觀結構金相鑒定指南 | Guide for Metallographic Identification of Microstructure in Cemented Carbides |
| ASTM B 658/B 658M | 無縫和焊接鋯和鋯合金管標準規范 | Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Pipe |
| ASTM B 661 | 鎂合金的熱處理標準實施規范 | Standard Practice for Heat Treatment of Magnesium Alloys |
| ASTM B 663 | 銀鎢硬質合金電觸點材料標準規范 | Standard Specification for Silver-Tungsten Carbide Electrical Contact Material |
| ASTM B 670 | 高溫設備用沉淀淬火鎳合金(UNS N07718) 厚板、薄板及帶材的標準規范 | Standard Specification for Precipitation-Hardening Nickel Alloy (UNS N07718) Plate, Sheet, and Strip for High-Temperature Service |
| ASTM B 672 | 鎳鐵鉻鉬鈮穩定合金(UNS N08700)棒材及線材的標準規范 | Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Bar and Wire |
| ASTM B 690 | 鐵鎳鉻鉬合金無縫管標準規范 | Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Seamless Pipe and Tube |
| ASTM B 691 | 鐵鎳鉻鉬合金桿材、棒材及線材標準規范 | Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Rod, Bar, and Wire |
| ASTM B 694 | 電纜護套用銅、銅合金、包銅青銅和包銅不銹鋼薄板和帶材標準規范 | Standard Specification for Copper, Copper-Alloy, Copper-Clad Bronze (CCB), Copper-Clad Stainless Steel (CCS), and Copper-Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable Shielding |
| ASTM B 698 | 無縫銅和銅合金管和管道的標準分類 | Standard Classification for Seamless Copper and Copper Alloy Plumbing Pipe and Tube |
| ASTM B 704 | 焊接UNS N06625、UNS N06219和UNS N08825合金管標準規范 | Standard Specification for Welded UNS N06625, UNS N06219 and UNS N08825 Alloy Tubes |
| ASTM B 705 | 鎳合金(UNS N06625、N06219和N08825)焊接管的標準規范 | Standard Specification for Nickel-Alloy (UNS N06625, N06219 and N08825) Welded Pipe |
| ASTM B 706 | 無縫銅合金管標準規范 | Standard Specification for Seamless Copper Alloy (UNS No. C69100) Pipe and Tube |
| ASTM B 708 | 鉭和鉭合金板、薄板和帶材標準規范 | Standard Specification for Tantalum and Tantalum Alloy Plate, Sheet, and Strip |
| ASTM B 709 | 鐵鎳鉻鉬合金板、薄板和帶材標準規范 | Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08028)* Plate, Sheet, and Strip |
| ASTM B 710 | 鎳鐵鉻硅合金焊接管標準規范 | Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Pipe |
| ASTM B 711 | 同心絞捻鋁合金鋼芯導線(AACSR)(6201)的標準規范 | Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy Conductors, Steel Reinforced (AACSR) (6201) |
| ASTM B 718 | 鎳鉻鉬鈷鎢鐵硅合金板,薄板和帶材的標準規范 | Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate, Sheet, and Strip |
| ASTM B 719 | 鎳鉻鉬鈷鎢鐵硅合金(UNS N06333)棒標準規范 | Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Bar |
| ASTM B 722 | 鎳-鉻-鉬-鈷-鎢-鐵硅合金(UNS N06333)無縫管道和管標準規范 | Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Seamless Pipe and Tube |
| ASTM B 723 | 鎳鉻鉬鈷鎢鐵硅合金焊接管的標準規范 | Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Pipe |
| ASTM B 724 | 用新式輕便非卡尺型儀器測量鋁合金壓痕硬度的標準試驗方法 | Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Newage, Portable, Non-Caliper-Type Instrument |
| ASTM B 725 | 鎳(UNS N02200/UNS N02201)和鎳合金(UNS N04400)焊接管的標準規范 | Standard Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Pipe |
| ASTM B 726 | 鎳鉻鉬鈷鎢鐵硅合金(UNS N06333)焊接管的標準規范 | Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Tube |
| ASTM B 729 | 無縫UNS N08020、UNS NO8026和UNS NO8024鎳合金管的標準規范 | Standard Specification for Seamless UNS N08020, UNS N08026, and UNS N08024 Nickel-Alloy Pipe and Tube |
| ASTM B 736 | 鋁、鋁合金和鋁包層鋼電纜屏蔽材料標準規范 | Standard Specification for Aluminum, Aluminum Alloy and Aluminum-Clad Steel Cable Shielding Stock |
| ASTM B 739 | 鉬鐵鉻硅合金焊接管標準規范 | Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Tube |
| ASTM B 740 | 銅鎳錫旋節合金帶材的標準規范 | Standard Specification for Copper-Nickel-Tin Spinodal Alloy Strip |
| ASTM B 744/B 744M | 波紋鋁管用鋁合金薄板的標準規范 | Standard Specification for Aluminum Alloy Sheet for Corrugated Aluminum Pipe |
| ASTM B 746/B 746M | 現場栓接管、管拱和拱用波紋鋁合金結構板的標準規范 | Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches |
| ASTM B 749 | 鉛和鉛合金帶材、薄板和板材產品標準規范 | Standard Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products |
| ASTM B 750 | 熱浸涂層用錠鐵模型中GALFAN(鋅-5%鋁-含鈰稀土)合金的標準規范 | Standard Specification for GALFAN (Zinc-5 % Aluminum-Mischmetal) Alloy in Ingot Form for Hot-Dip Coatings |
| ASTM B 751 | 鎳和鎳合金焊接管一般要求的標準規范 | Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Tube |
| ASTM B 753 | 恒溫器組件合金的標準規范 | Standard Specification for Thermostat Component Alloys |
| ASTM B 754 | 銅及銅合金帶材平面偏差的測量和記錄的測試方法 | Standard Test Method for Measuring and Recording the Deviations from Flatness in Copper and Copper Alloy Strip |
| ASTM B 755 | 鎳鉻鉬鎢合金板、薄板和帶材標準規范 | Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Plate, Sheet, and Strip |
| ASTM B 756 | 鎳鉻鉬鎢合金(UNS N06110)棒材和桿材標準規范 | Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06110) Rod and Bar |
| ASTM B 757 | 鎳鉻鉬鎢合金焊接管標準規范 | Standard Specification for Nickel-Chromium-Molybdenum-Tungsten-Alloys (UNS N06110) Welded Pipe |
| ASTM B 758 | 鎳鉻鉬鎢合金焊接管標準規范 | Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Welded Tube |
| ASTM B 759 | 鎳鉻鉬鎢合金管標準規范 | Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Pipe and Tube |
| ASTM B 76 | 電加熱用鎳鉻和鎳鉻鐵合金的加速壽命的試驗方法 | Test Method for Accelerated Life of Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating |
| ASTM B 763 | 閥門用銅合金砂型鑄件標準規范 | Standard Specification for Copper Alloy Sand Castings for Valve Applications |
| ASTM B 768 | 銅鈷鈹合金和銅鎳鈹合金帶材和板材標準規范 | Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Strip and Sheet |
| ASTM B 769 | 鋁合金的剪切測試用標準試驗方法 | Standard Test Method for Shear Testing of Aluminum Alloys |
| ASTM B 77 | 電阻合金的熱電功率用標準試驗方法 | Standard Test Method for Thermoelectric Power of Electrical-Resistance Alloys |
| ASTM B 770 | 通用銅鈹合金砂型鑄件的標準規范 | Standard Specification for Copper-Beryllium Alloy Sand Castings for General Applications |
| ASTM B 771 | 硬質合金短桿斷裂韌度的試驗方法 | Standard Test Method for Short Rod Fracture Toughness of Cemented Carbides |
| ASTM B 774 | 低熔點合金的標準規范 | Standard Specification for Low Melting Point Alloys |
| ASTM B 775 | 鎳和鎳合金焊接管一般要求的標準規范 | Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Pipe |
| ASTM B 776 | 鉿和鉿合金帶材、薄板材和厚板材的標準規范 | Standard Specification for Hafnium and Hafnium Alloy Strip, Sheet, and Plate |
| ASTM B 78 | 電加熱用鐵鉻鋁合金的加速壽命的試驗方法 | Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating |
| ASTM B 780 | 含銀75%、銅24.5%及鎳0.5%的電觸點合金標準規范 | Standard Specification for 75% Silver, 24.5% Copper, 0.5% Nickel Electrical Contact Alloy |
| ASTM B 792 | 空殼鑄造用鑄模中的鋅合金錠標準規范 | Standard Specification for Zinc Alloys in Ingot Form for Slush Casting |
| ASTM B 793 | 薄板金屬成型壓模和塑料注模用鋅鑄造合金錠標準規范 | Standard Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds |
| ASTM B 795 | 確定粉末鍛鋼部件中合金和非合金鐵雜質百分比的標準試驗方法 | Standard Test Method for Determining the Percentage of Alloyed or Unalloyed Iron Contamination Present in Powder Forged (P/F) Steel Parts |
| ASTM B 796 | 低合金粉末鍛鋼部件的非金屬雜質含量的標準測試方法 | Standard Test Method for Nonmetallic Inclusion Content of Powders Intended for Powder Forging (P/F) Applications |
| ASTM B 80 | 鎂合金沙鑄件的標準規范 | Standard Specification for Magnesium-Alloy Sand Castings |
| ASTM B 800 | 電氣用退火及中溫回火8000系列鋁合金線的標準規范 | Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes-Annealed and Intermediate Tempers |
| ASTM B 802/B 802M | 鋼芯鋁導線(ASCR)用涂覆鋅-5%鋁-混合稀土合金鋼芯線的標準規范 | Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR) |
| ASTM B 803 | 鋼芯鋁和鋁合金導線用涂覆高強度鋅-5%鋁-混合稀土合金鋼芯線的標準規范 | Standard Specification for High-Strength Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced |
| ASTM B 805 | 淀積硬化鎳合金鋼棒和鋼絲的標準規范 | Standard Specification for Precipitation Hardening Nickel Alloys Bar and Wire |
| ASTM B 806 | 通用銅合金永久鑄模鑄件的標準規范 | Standard Specification for Copper Alloy Permanent Mold Castings for General Applications |
| ASTM B 807/B 807M | 鋁合金用擠壓溶液熱處理的標準實施規范 | Standard Practice for Extrusion Press Solution Heat Treatment for Aluminum Alloys |
| ASTM B 811 | 核反應堆燃料包殼用鍛制鋯合金無縫管的標準規范 | Standard Specification for Wrought Zirconium Alloy Seamless Tubes for Nuclear Reactor Fuel Cladding |
| ASTM B 813 | 銅和銅合金管釬焊用液體和軟膏狀助溶劑的標準規范 | Standard Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube |
| ASTM B 814 | 鎳-鉻-鐵-鉬-鎢合金(UNS N06920)厚板材、薄板材和帶材標準規范 | Standard Specification for Nickel-Chromium-Iron-Molybdenum-Tungsten Alloy (UNS N06920) Plate, Sheet, and Strip |
| ASTM B 815 | 鈷鉻鎳鉬鎢合金桿標準規范 | Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod |
| ASTM B 817 | 粉末冶金(P/M)鈦合金結構元件標準規范 | Standard Specification for Powder Metallurgy (P/M) Titanium Alloy Structural Components |
| ASTM B 818 | 鈷鉻鎳鉬鎢合金板、薄板和帶材標準規范 | Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Plate, Sheet and Strip |
| ASTM B 820 | 銅和銅合金帶材可成型性測定用彎曲試驗的標準試驗方法 | Standard Test Method for Bend Test for Determining the Formability of Copper and Copper Alloy Strip |
| ASTM B 824 | 銅合金鑄件一般要求的標準規范 | Standard Specification for General Requirements for Copper Alloy Castings |
| ASTM B 828 | 用銅、銅合金管和配件釬焊制作毛細管接縫的標準實施規程 | Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings |
| ASTM B 829a | 鎳和鎳合金無縫管的一般要求的標準規范 | Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube |
| ASTM B 831 | 薄鋁合金制品剪切試驗的標準試驗方法 | Standard Test Method for Shear Testing of Thin Aluminum Alloy Products |
| ASTM B 833 | 鋼材防腐蝕用熱噴鍍(金屬化)的鋅和鋅合金金屬絲標準規范 | Standard Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) for the Corrosion Protection of Steel |
| ASTM B 834 | 壓力強化粉末冶金鐵鎳鉻鉬和鎳鉻鉬鈳(Nb)合金管法蘭、管配件、閥門和零件標準規范 | Standard Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625) Alloy Pipe Flanges, Fittings, Valves, and Parts |
| ASTM B 84 | 精密電阻器用合金絲溫度電阻常數的標準試驗方法 | Standard Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors |
| ASTM B 840 | 鋅鈷合金沉積物用電解鍍層標準規范 | Standard Specification for Electrodeposited Coatings for Zinc Cobalt Alloy Deposits |
| ASTM B 841 | 鋅鎳合金沉積物用電解鍍層標準規范 | Standard Specification for Electrodeposited Coatings for Zinc Nickel Alloy Deposits |
| ASTM B 842 | 鋅鐵合金沉積物用電解鍍層標準規范 | Standard Specification for Electrodeposited Coatings for Zinc Iron Alloy Deposits |
| ASTM B 843 | 陰極保護用鎂合金陽極的標準規范 | Standard Specification for Magnesium Alloy Anodes for Cathodic Protection |
| ASTM B 846a | 銅和銅合金的標準術語 | Standard Terminology for Copper and Copper Alloys |
| ASTM B 85 | 鋁合金壓模鑄件標準規范 | Standard Specification for Aluminum-Alloy Die Castings |
| ASTM B 852 | 薄鋼板熱浸鍍鋅用連續鍍鋅級(CGG)鋅合金的標準規范 | Standard Specification for Continuous Galvanizing Grade (CGG) Zinc Alloys for Hot-Dip Galvanizing of Sheet Steel |
| ASTM B 858 | 用氨蒸氣試驗測定銅合金對應力腐蝕裂紋敏感度的標準試驗方法 | Standard Test Method for Ammonia Vapor Test for Determining Susceptibility to Stress Corrosion Cracking in Copper Alloys |
| ASTM B 86 | 鋅及鋅鋁(ZA)合金鑄件和壓鑄件的標準規范 | Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings |
| ASTM B 860 | 熱浸鍍鋅用鋅主合金的標準規范 | Standard Specification for Zinc Master Alloys for Use in Hot Dip Galvanizing |
| ASTM B 861a | 鈦和鈦合金無縫鋼管的標準規范 | Standard Specification for Titanium and Titanium Alloy Seamless Pipe |
| ASTM B 862b | 鈦和鈦合金焊接管道的標準規范 | Standard Specification for Titanium and Titanium Alloy Welded Pipe |
| ASTM B 863a | 鈦和鈦合金絲的標準規范 | Standard Specification for Titanium and Titanium Alloy Wire |
| ASTM B 865 | 沉淀硬化鎳銅鋁合金(UNS N05500)棒材、桿材、線材、鍛件和鍛坯的標準規范 | Standard Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy (UNS N05500) Bar, Rod, Wire, Forgings, and Forging Stock |
| ASTM B 870 | 銅鈹合金鍛制和擠制合金的標準規范 | Standard Specification for Copper-Beryllium Alloy Forgings and Extrusions Alloys (UNS Nos. C17500 and C17510) |
| ASTM B 871 | 鋁合金產品撕裂測試的標準試驗方法 | Standard Test Method for Tear Testing of Aluminum Alloy Products |
| ASTM B 872 | 淀積硬化鎳合金金屬板、薄板和帶材的標準規范 | Standard Specification for Precipitation-Hardening Nickel Alloys Plate, Sheet, and Strip |
| ASTM B 879 | 鎂和鎂合金上非電解質轉換涂層的標準規范 | Standard Practice for Applying Non-Electrolytic Conversion Coatings on Magnesium and Magnesium Alloys |
| ASTM B 880 | 鎳、鎳合金及鈷合金的化學檢驗分析限值一般要求的標準規范 | Standard Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys, and Cobalt Alloys |
| ASTM B 881 | 鋁和鎂合金產品的相關標準術語 | Standard Terminology Relating to Aluminum- and Magnesium- Alloy Products |
| ASTM B 884 | 用于超導的鈮鈦合金坯料、棒材和條材的標準規范 | Standard Specification for Niobium-Titanium Alloy Billets, Bar, and Rod for Superconducting Applications |
| ASTM B 888 | 電連接器或彈簧觸點生產用銅合金帶材的標準規范 | Standard Specification for Copper Alloy Strip for Use in Manufacture of Electrical Connectors or Spring Contacts |
| ASTM B 890 | 用X射線熒光光譜法測定鎢合金和鎢硬金屬的金屬成分用標準試驗方法 | Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry |
| ASTM B 891 | 帶集成散熱片的無縫和焊接鈦及鈦合金冷凝器和熱交換器管的標準規范 | Standard Specification for Seamless and Welded Titanium and Titanium Alloy Condenser and Heat Exchanger Tubes With Integral Fins |
| ASTM B 892 | 壓模鑄造用鋅銅鋁合金錠標準規范 | Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy in Ingot Form for Die Castings |
| ASTM B 894 | 鋅銅鋁合金壓鑄件標準規范 | Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy Die Castings |
| ASTM B 897 | 鋅及鋅合金大鑄錠和坯錠的外形標準規范 | Standard Specification for Configuration of Zinc and Zinc Alloy Jumbo and Block Ingot |
| ASTM B 899 | 有色金屬和合金的相關標準術語 | Standard Terminology Relating to Non-ferrous Metals and Alloys |
| ASTM B 90/B 90M | 鎂合金薄板材和板材的標準規范 | Standard Specification for Magnesium-Alloy Sheet and Plate |
| ASTM B 900 | 美國政府機構用銅和銅合金軋制品包裝的標準實施規程 | Standard Practice for Packaging of Copper and Copper Alloy Mill Products for U.S. Government Agencies |
| ASTM B 906 | 壓延鎳和鎳合金板材、薄板和帶材的一般要求的標準規范 | Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip |
| ASTM B 908 | 鋅合金鑄錠的色碼使用的標準規程 | Standard Practice for the Use of Color Codes for Zinc Casting Alloy Ingot |
| ASTM B 91 | 鎂合金鍛件的標準規范 | Standard Specification for Magnesium-Alloy Forgings |
| ASTM B 914 | 鋼的熱浸鍍鋅中使用的鋅及鋅合金錠色碼的標準規程 | Standard Practice for Color Codes on Zinc and Zinc Alloy Ingot for Use in Hot-Dip Galvanizing of Steel |
| ASTM B 917/B 917M | 整個工藝用鋁合金鑄件熱處理的標準實施規程 | Standard Practice for Heat Treatment of Aluminum-Alloy Castings from All Processes |
| ASTM B 918 | 鍛造鋁合金的熱處理的標準實施規程 | Standard Practice for Heat Treatment of Wrought Aluminum Alloys |
| ASTM B 92/B 92M | 再熔煉用非合金鎂錠和鎂棒的標準規范 | Standard Specification for Unalloyed Magnesium Ingot and Stick For Remelting |
| ASTM B 920 | 用次氯酸鈉液的蒸氣測定金屬襯底上金和鈀合金覆層孔隙度的標準實施規范 | Standard Practice for Porosity in Gold and Palladium Alloy Coatings on Metal Substrates by Vapors of Sodium Hypochlorite Solution |
| ASTM B 921 | 鋁和鋁合金上覆蓋的非六價鉻層的標準規范 | Standard Specification for Non-hexavalent Chromium Conversion Coatings on Aluminum and Aluminum Alloys |
| ASTM B 924 | 具有整體散熱葉片的冷凝器及熱交換器用無縫及焊接鎳合金管標準規范 | Standard Specification for Seamless and Welded Nickel Alloy Condenser and Heat Exchanger Tubes With Integral Fins |
| ASTM B 926 | 用燈標表測定鋁及鋁合金平箔中氣泡的標準方法 | Standard Method for Pinhole Determination in Aluminum and Aluminum Alloy Plain Foil by Means of a Light Table |
| ASTM B 928/B 928M | 海上服務和類似環境用高鎂鋁合金薄板材和板材的標準規范 | Standard Specification for High Magnesium Aluminum-Alloy Sheet and Plate for Marine Service and Similar Environments |
| ASTM B 929 | 銅鎳錫旋節合金棒材和桿材的標準規范 | Standard Specification for Copper-Nickel-Tin Spinodal Alloy Rod and Bar |
| ASTM B 93/B 93M | 砂型鑄件、硬模鑄件和壓模鑄件鑄錠用鎂合金的標準規范 | Standard Specification for Magnesium Alloys in Ingot Form for Sand Castings, Permanent Mold Castings, and Die Castings |
| ASTM B 930 | 確定燒結碳化鎢(硬質合金)中不規則大顆粒的頻度和粒徑額定值的標準試驗方法 | Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals) |
| ASTM B 932 | 低碳鎳、鉻、鉬、釓合金板、薄板材和帶材的標準規范 | Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum-Gadolinium Alloy Plate, Sheet, and Strip |
| ASTM B 936 | 銅鉻鐵鈦合金板、薄板、帶材和軋制棒材的標準規范 | Standard Specification for Copper-Chromium-Iron-Titanium Alloy Plate, Sheet, Strip and Rolled Bar |
| ASTM B 938 | 銅鈹合金鍛件和擠制件的標準規范 | Standard Specification for Copper-Beryllium Alloy Forgings and Extrusions (UNS Nos. C17500 and C17510) |
| ASTM B 94 | 鎂合金壓模鑄件的標準規范 | Standard Specification for Magnesium-Alloy Die Castings |
| ASTM B 941 | 電工用耐熱鋁鋯合金絲的標準規范 | Standard Specification for Heat Resistant Aluminum-Zirconium Alloy Wire for Electrical Purposes |
| ASTM B 943 | 電子設備熱噴涂用鋅和鋅合金線的標準規范 | Standard Specification for Zinc and Tin Alloy Wire Used in Thermal Spraying for Electronic Applications |
| ASTM B 945 | T1、T2、T5、和T10型回火產品的梯度溫度成形加工的冷擠壓鋁合金的標準規范 | Standard Practice for Aluminum Alloy Extrusions Press Cooled from an Elevated Temperature Shaping Process for Production of T1, T2, T5 and T10-Type Tempers |
| ASTM B 947 | 鋁合金厚板用熱軋鋼機溶解熱處理的標準實施規范 | Standard Practice for Hot Rolling Mill Solution Heat Treatment for Aluminum Alloy Plate |
| ASTM B 949 | 鋅和鋅合金產品一般要求的標準規范 | Standard Specification for General Requirements for Zinc and Zinc Alloy Products |
| ASTM B 950 | 銅和銅合金產品規范的編輯程序和格式的標準指南 | Standard Guide for Editorial Procedures and Form of Product Specifications for Copper and Copper Alloys |
| ASTM B 951 | 鑄造和鍛造非合金鎂及鎂合金的代碼化用標準實施規程 | Standard Practice for Codification of Unalloyed Magnesium and Magnesium-Alloys, Cast and Wrought |
| ASTM B 952 | 旋轉鑄造用錠狀鋅合金的標準規范 | Standard Specification for Zinc Alloys in Ingot Form for Spin Casting |
| ASTM B 953 | 光譜化學分析用鎂和鎂合金取樣的標準實施規程 | Standard Practice for Sampling Magnesium and Magnesium Alloys for Spectrochemical Analysis |
| ASTM B 954 | 用原子發射光譜法分析鎂和鎂合金的標準試驗方法 | Standard Test Method for Analysis of Magnesium and Magnesium Alloys by Atomic Emission Spectrometry |
| ASTM B 96/B 96M | 一般用途和壓力容器用銅硅合金板材、薄板、帶材和軋制棒材的標準規范 | Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels |
| ASTM B 99/B 99M | 一般用途的硅銅合金線材的標準規范 | Standard Specification for Copper-Silicon Alloy Wire for General Applications |
| ASTM C 752 | 核純級的銀銦鎘合金標準規范 | Standard Specification for Nuclear-Grade Silver-Indium-Cadmium Alloy |
| ASTM C 760 | 核純級銀銦鎘合金的化學及光譜化學分析方法 | Test Methods for Chemical and Spectrochemical Analysis of Nuclear-Grade Silver-Indium-Cadmium Alloys |
| ASTM D 1730 | 涂漆用鋁和鋁合金表面預處理標準實施規范 | Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting |
| ASTM D 1732 | 涂漆用鎂合金表面預處理的標準實施規范 | Standard Practices for Preparation of Magnesium Alloy Surfaces for Painting |
| ASTM D 2201 | 試驗涂料及相關鍍覆產品用鍍鋅和鍍鋅合金鋼板的制備的標準操作規程 | Standard Practice for Preparation of Zinc-Coated and Zinc-Alloy-Coated Steel Panels for Testing Paint and Related Coating Products |
| ASTM D 3115 | 高剪切應力下潤滑劑與航空用合金爆炸反應性的標準試驗方法 | Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear |
| ASTM D 3185 | 包括混合物和油的SBR（苯乙烯合金橡膠）的橡膠評估的標準試驗方法 | Standard Test Methods for Rubber-Evaluation of SBR (Styrene-Butadiene Rubber) Including Mixtures With Oil |
| ASTM D 4340 | 在排熱條件下發動機冷卻劑對鑄造鋁合金腐蝕性的標準試驗方法 | Standard Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants Under Heat-Rejecting Conditions |
| ASTM D 4673 | 丙烯腈-丁二烯-苯乙烯(ABS)塑料及合金模壓和擠壓材料的標準分類系統 | Standard Classification System for Acrylonitrile-Butadiene-Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials |
| ASTM D 6208 | 用恒電流測量鋁及其合金的再鈍化電位的標準試驗方法 | Standard Test Method for Repassivation Potential of Aluminum and Its Alloys by Galvanostatic Measurement |
| ASTM D 6492 | 鋅及鋅/鋁合金涂覆鋼上六價鉻檢測的標準實施規程 | Standard Practice for Detection of Hexavalent Chromium On Zinc and Zinc/Aluminum Alloy Coated Steel |
| ASTM D 6865 | 丙烯氰-苯乙烯-丙烯酸鹽和丙烯氰-EPDM-苯乙烯塑料和合金模制和擠壓材料的標準分類系統 | Standard Classification System for Acrylonitrile-Styrene-Acrylate (ASA) and Acrylonitrile-EPDM-Styrene (AES) Plastics and Alloys Molding and Extrusion Materials |
| ASTM E 1009 | 分析碳和低合金鋼用光輻射真空分光儀的評估 | Standard Practice for Evaluating an Optical Emission Vacuum Spectrometer to Analyze Carbon and Low-Alloy Steel |
| ASTM E 101 | 用點對面技術做鋁和鋁合金光譜分析的試驗方法 | Test Method for Spectrographic Analysis of Aluminum and Aluminum Alloys by the Point-to-Plane Technique |
| ASTM E 1019 | 鋼、鐵、鎳和鈷合金中碳、硫、氮和氧含量測定的標準試驗方法 | Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and in Iron, Nickel, and Cobalt Alloys |
| ASTM E 106 | 銅鈹合金的化學分析標準試驗方法 | Standard Test Methods for Chemical Analysis of Copper-Beryllium Alloys |
| ASTM E 1158 | 金屬和金屬合金生產材料的脈沖縱波超聲檢驗用的標準塊的材料選擇與制造的標準指南 | Standard Guide for Material Selection and Fabrication of Reference Blocks for the Pulsed Longitudinal Wave Ultrasonic Examination of Metal and Metal Alloy Production Material |
| ASTM E 1159 | 熱電偶材料的標準規范.鉑-銠合金和鉑 | Standard Specification for Thermocouple Materials, Platinum-Rhodium Alloys, and Platinum |
| ASTM E 118 | 銅鉻合金的化學分析試驗方法 | Test Methods for Chemical Analysis of Copper-Chromium Alloys |
| ASTM E 121 | 銅碲合金的化學分析標準試驗方法 | Standard Test Methods for Chemical Analysis of Copper-Tellurium Alloys |
| ASTM E 1251 | 用原子發射光譜法分析鋁和鋁合金的標準試驗方法 | Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Atomic Emission Spectrometry |
| ASTM E 127 | 超聲波標準參考鋁合金塊的制造及檢驗標準實施規程 | Standard Practice for Fabricating and Checking Aluminum Alloy Ultrasonic Standard Reference Blocks |
| ASTM E 1277 | 用ICP發射光譜測定法對鋅-5%鋁-鈰合金作化學分析的標準試驗方法 | Standard Test Method for Chemical Analysis of Zinc-5% Aluminum-Mischmetal Alloys by ICP Emission Spectrometry |
| ASTM E 1282 | 規定金屬及其合金的化學成分并選擇取樣的實際操作與定量分析方法 | Standard Guide for Specifying the Chemical Compositions and Selecting Sampling Practices and Quantitative Analysis Methods for Metals, Ores, and Related Materials |
| ASTM E 129 | 用粉末技術做熱離子鎳合金光譜分析的試驗方法 | Test Method for Spectrographic Analysis of Thermionic Nickel Alloys by the Powder Technique |
| ASTM E 1306 | 測定化學成分用電弧溶化法制備金屬及合金式樣的標準實施規程 | Standard Practice for Preparation of Metal and Alloy Samples by Electric Arc Remelting for the Determination of Chemical Composition |
| ASTM E 1338 | 計算機化材料特性數據庫的金屬和合金的識別 | Guide for Identification of Metals and Alloys in Computerized Material Property Databases |
| ASTM E 1339 | 計算機管理材料性能數據庫中鋁合金和零件的識別 | Identification of Aluminum Alloys and Parts in Computerized Material Property Databases |
| ASTM E 1409 | 用惰性氣體熔解技術測定鈦及鈦合金中氧和氮的標準試驗方法 | Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique |
| ASTM E 1447 | 惰性氣體熔解熱傳導/紅外檢測法測定鈦和鈦合金中氫的標準試驗方法 | Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity/Infrared Detection Method |
| ASTM E 1450 | 液氦中結構合金抗拉試驗的標準試驗方法 | Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium |
| ASTM E 1473 | 鎳、鈷和耐高溫合金化學分析用標準試驗方法 | Standard Test Methods for Chemical Analysis of Nickel, Cobalt, and High-Temperature Alloys |
| ASTM E 1497 | 水混合金屬加工液的安全使用的標準實施規程 | Standard Practice for Safe Use of Water-Miscible Metal Removal Fluids |
| ASTM E 1552 | 使用氫等離子體光譜計測定鋯和鋯合金中鉿的標準試驗方法 | Standard Test Method for Determining Hafnium in Zirconium and Zirconium Alloys Using the D-C Argon Plasma Spectrometer |
| ASTM E 1615 | 使用鋅鐵合金法測定微量鐵的標準試驗方法 | Standard Test Method for Iron in Trace Quantities Using the FerroZine Method |
| ASTM E 1659 | 電鍍鎳鋅合金薄鋼板的涂層重量和化學分析的標準試驗方法 | Standard Test Methods Coating Weight and Chemical Analysis of Zinc-Nickel Alloy Electrolytically Coated on Steel Sheet |
| ASTM E 1793 | 連入泡沫和梁型可移動遮蔽物的鋁合金制備的標準實施規程 | Standard Practice for Preparation of Aluminum Alloy for Bonding in Foam and Beam Type Transportable Shelters |
| ASTM E 1826 | 鋁合金粘結用低揮發性有機化合物耐腐蝕粘合底漆的標準規范 | Standard Specification for Low Volatile Organic Compound (VOC) Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded |
| ASTM E 1834 | 電熱原子吸收光譜法測定鎳合金中鉛的標準試驗方法 | Standard Test Method for Determination of Lead in Nickel Alloys by Electrothermal Atomic Absorption Spectrometric Method |
| ASTM E 1835 | 火焰原子吸收光譜法分析鎳合金的標準試驗方法 | Standard Test Method for Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry |
| ASTM E 1852 | 用電熱原子吸收光譜測定法測定碳和低合金鋼中銻低含量的標準試驗方法 | Standard Test Method for Determination of Low Levels of Antimony in Carbon and Low-Alloy Steel by Electrothermal Atomic Absorption Spectrometry |
| ASTM E 1916 | 混合金屬的識別和/或分離標準指南 | Standard Guide for Identification and/or Segregation of Mixed Lots of Metals |
| ASTM E 1917 | 用雙氧釩磷鉬酸鹽分子吸收光譜測定法測定鎳、鎳鐵和鎳合金中磷含量的標準試驗方法 | Standard Test Method for Determination of Phosphorous in Nickel, Ferronickel, and Nickel Alloys by the Phosphovanadomolybdate Molecular Absorption Spectrometric Method |
| ASTM E 1938 | 用二安替比林甲烷分子吸收光譜測定法測定鎳合金中鈦含量的標準試驗方法 | Standard Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Molecular Absorption Spectrometric Method |
| ASTM E 1941 | 高熔點和活性金屬及其合金中碳含量測定的標準試驗方法 | Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys |
| ASTM E 212 | 用桿對桿技術對碳素鋼及低合金鋼做光譜分析的方法 | Method for Spectrographic Analysis of Carbon and Low-Alloy Steel by the Rod-to-Rod Technique |
| ASTM E 215 | 無縫鋁合金管的電磁檢驗用的標準化設備 | Standardizing Equipment for Electromagnetic Examination of Seamless Aluminum-Alloy Tube |
| ASTM E 2371 | 用原子輻射等離子體光譜測定法分析鈦和鈦合金的標準試驗方法 | Standard Test Method for Analysis of Titanium and Titanium Alloys by Atomic Emission Plasma Spectrometry |
| ASTM E 243 | 銅及銅合金管的電磁(渦流)檢驗 | Standard Practice for Electromagnetic (Eddy-Current) Examination of Copper and Copper-Alloy Tubes |
| ASTM E 2465 | 用X射線熒光光譜測定法分析不銹鋼和合金鋼的標準試驗方法 | Standard Test Method for Analysis of Ni-Base Alloys by X-ray Fluorescence Spectrometry |
| ASTM E 255 | 化學成分測定用銅和銅合金取樣的標準實施規范 | Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition |
| ASTM E 272 | 高強度銅基和鎳銅合金鑄件用參考射線照片 | Standard Reference Radiographs for High-Strength Copper-Base and Nickel-Copper Alloy Castings |
| ASTM E 293 | 用溶解技術測定低合金鋼中酸溶性鋁的光譜分析試驗法 | Method for Spectrographic Determination of Acid-Soluble Aluminum in Low-Alloy Steel by the Solution Technique |
| ASTM E 32 | 測定化學成分用鐵合金及鋼添加劑的取樣 | Sampling Ferroalloys and Steel Additives for Determination of Chemical Composition |
| ASTM E 322 | 低合金鋼和鑄鐵的X射線發射光譜測定分析法 | Standard Test Method for X-Ray Emission Spectrometric Analysis of Low-Alloy Steels and Cast Irons |
| ASTM E 34 | 鋁和鋁基合金化學分析的標準試驗方法 | Standard Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys |
| ASTM E 340 | 金屬和合金宏觀腐蝕的標準試驗方法 | Standard Test Method for Macroetching Metals and Alloys |
| ASTM E 35 | 鎂和鎂合金的化學分析試驗方法 | Standard Test Methods for Chemical Analysis of Magnesium and Magnesium Alloys |
| ASTM E 350 | 碳素鋼、低合金鋼、硅電工鋼、鐵鑄錠和熟鐵化學分析的標準試驗方法 | Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron |
| ASTM E 352 | 工具鋼及其它類似中合金鋼和高合金鋼化學分析的標準試驗方法 | Standard Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels |
| ASTM E 353 | 不銹鋼、耐熱鋼、馬氏體鋼和其它類似的鉻鎳鐵合金化學分析的標準試驗方法 | Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys |
| ASTM E 354 | 高溫鋼、電工鋼、磁鋼和其它類似的鐵、鎳和鈷合金化學分析的標準試驗方法 | Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys |
| ASTM E 363 | 鉻和鉻鐵合金化學分析的標準試驗方法 | Standard Test Methods for Chemical Analysis of Chromium and Ferrochromium |
| ASTM E 367 | 鈮鐵合金的化學分析標準方法 | Standard Methods for Chemical Analysis of Ferroniobium |
| ASTM E 372 | 鎂硅鐵合金中鈣和鎂的測定用標準試驗方法 | Standard Test Method for Determination of Calcium and Magnesium in Magnesium Ferrosilicon |
| ASTM E 407 | 微蝕金屬和合金的標準實施規程 | Standard Practice for Microetching Metals and Alloys |
| ASTM E 415a | 碳和低合金鋼光輻射真空光譜測定分析的標準試驗方法 | Standard Test Method for Optical Emission Vacuum Spectrometric Analysis of Carbon and Low-Alloy Steel |
| ASTM E 426 | 無縫焊接管形產品、奧氏體不銹鋼的類似合金的電磁(渦電流)檢驗 | Standard Practice for Electromagnetic (Eddy-Current) Examination of Seamless and Welded Tubular Products, Austenitic Stainless Steel and Similar Alloys |
| ASTM E 47 | 鋅壓鑄合金的化學分析試驗方法 | Test Methods for Chemical Analysis of Zinc Die-Casting Alloys |
| ASTM E 478 | 銅合金化學分析的標準試驗方法 | Standard Test Methods for Chemical Analysis of Copper Alloys |
| ASTM E 527 | 統一編號系統(UNS)中金屬和合金編號的標準實施規程 | Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS) |
| ASTM E 53 | 用重量分析法測定非合金銅中銅含量的標準試驗方法 | Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry |
| ASTM E 536 | 鋅和鋅合金化學分析的標準試驗方法 | Standard Test Methods for Chemical Analysis of Zinc and Zinc Alloys |
| ASTM E 539 | 6鋁4釩鈦合金的X射線熒光光譜測定分析用標準試驗方法 | Standard Test Method for X-Ray Fluorescence Spectrometric Analysis of 6Al-4V Titanium Alloy |
| ASTM E 55 | 測定化學成分用鍛制有色金屬及其合金鑄件的取樣 | Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition |
| ASTM E 571 | 鎳及鎳合金管形制品的電磁(渦電流)檢驗 | Standard Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel Alloy Tubular Products |
| ASTM E 572a | 用X射線熒光光譜測定法分析不銹鋼和合金鋼的標準試驗方法 | Standard Test Method for Analysis of Stainless and Alloy Steels by X-ray Fluorescence Spectrometry |
| ASTM E 581 | 錳銅合金化學分析的標準試驗方法 | Standard Test Methods for Chemical Analysis of Manganese-Copper Alloys |
| ASTM E 62 | 銅和銅合金的化學分析標準試驗方法(光度測定法) | Standard Test Methods for Chemical Analysis of Copper and Copper Alloys (Photometric Methods) |
| ASTM E 634 | 光發射光譜測定分析用鋅和鋅合金取樣的標準實施規程 | Standard Practice for Sampling of Zinc and Zinc Alloys for Optical Emission Spectrometric Analysis |
| ASTM E 693 | 根據每個原子(DPA)、E706(ID)位移辨別鐵和低合金鋼中子照射特性的標準實施規程 | Standard Practice for Characterizing Neutron Exposures in Iron and Low Alloy Steels in Terms of Displacements Per Atom (DPA), E 706(ID) |
| ASTM E 696 | 鎢-錸合金熱電偶絲的標準規范 | Standard Specification for Tungsten-Rhenium Alloy Thermocouple Wire |
| ASTM E 716 | 光譜化學分析用鋁和鋁合金取樣 | Standard Practices for Sampling Aluminum and Aluminum Alloys for Spectrochemical Analysis |
| ASTM E 75 | 銅鎳及銅鎳鋅合金的化學分析試驗方法 | Test Methods for Chemical Analysis of Copper-Nickel and Copper-Nickel-Zinc Alloys |
| ASTM E 864 | 蜂窩狀保護板中要用粘合劑粘結的鋁合金表面準備的標準實施規范 | Standard Practice for Surface Preparation of Aluminum Alloys to be Adhesively Bonded in Honeycomb Shelter Panels |
| ASTM E 866 | 蜂窩狀保護板中粘結鋁合金用耐腐蝕粘合底漆的標準規范 | Standard Specification for Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels |
| ASTM E 88 | 測定化學成分用有色金屬及其合金鑄件的取樣 | Sampling Nonferrous Metals and Alloys in Cast Form for Determination of Chemical Composition |
| ASTM E 963 | 用鹽酸甲烷電解質從鎳和鎳鐵積超熱合金中進行相位的電解提取 | Standard Practice for Electrolytic Extraction of Phases from Ni and Ni-Fe Base Superalloys Using a Hydrochloric-Methanol Electrolyte |
| ASTM F 1058 | 外科植入物用煅制鈷-鉻-鎳-鉬-鐵合金 | Standard Specification for Wrought Cobalt-Chromium-Nickel-Molybdenum-Iron Alloy for Surgical Implant Applications |
| ASTM F 1108 | 外科植入物用Ti6Al4V合金鑄件的標準規范 | Standard Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406) |
| ASTM F 1108a | 外科移植用Ti6Al4V合金鑄件(UNS R56406)標準規范 | Standard Specification for Ti6Al4V Alloy Castings for Surgical Implants (UNS R56406) |
| ASTM F 1182 | 陽極,鍍鋅合金 | Standard Specification for Anodes, Sacrificial Zinc Alloy |
| ASTM F 1183 | 鋁合金鏈環柵欄結構 | Standard Specification for Aluminum Alloy Chain Link Fence Fabric |
| ASTM F 1295 | 外科植入設備用鍛制鈦-6鋁-7鈮合金的標準規范 | Standard Specification for Wrought Titanium-6 Aluminum-7 Niobium Alloy for Surgical Implant Applications (UNS R56700) |
| ASTM F 1345 | 鋅-5%鋁-鈰合金涂覆鋼連接鏈環欄柵結構 | Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric |
| ASTM F 136a | 外科植入設備用鍛制鈦6和鋁4釩特低雜質合金的標準規范(UNS R56401) | Standard Specification for Wrought Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401) |
| ASTM F 1466 | 金屬與陶瓷密封用鐵鎳鈷合金的標準規范 | Standard Specification for Iron-Nickel-Cobalt Alloys for Metal-to-Ceramic Sealing Applications |
| ASTM F 1472a | 外科植入設備用鍛制鈦6鋁4釩合金的標準規范(UNS R56400) | Standard Specification for Wrought Titanium -6Aluminum -4Vanadium Alloy for Surgical Implant Applications (UNS R56400) |
| ASTM F 15 | 鐵-鎳-鈷密封合金的標準規范 | Standard Specification for Iron-Nickel-Cobalt Sealing Alloy |
| ASTM F 1513 | 電子薄膜器件用純鋁(非合金)原材料標準規范 | Standard Specification for Pure Aluminum (Unalloyed) Source Material for Electronic Thin Film Applications |
| ASTM F 1537 | 外科植入物用鈷-28鉻-6鉬合金的標準規范(UNS R31537、UNS R31538和UNS R31539) | Standard Specification for Wrought Cobalt-28Chromium-6Molybdenum Alloys for Surgical Implants (UNS R31537, UNS R31538, and UNS R31539) |
| ASTM F 1545 | 有塑料內襯的鐵合金管、配件和法蘭的標準規范 | Standard Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges |
| ASTM F 1580 | 外科植入物涂敷用鈦及鈦-6鋁-4釩合金粉末的標準規范 | Standard Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of Surgical Implants |
| ASTM F 1684 | 低熱膨脹用鐵-鎳和鐵-鎳-鈷合金的標準規范 | Standard Specification for Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion Applications |
| ASTM F 1713 | 外科植入物用鍛制鈦-13鈮-13鋯合金的標準規范 | Standard Specification for Wrought Titanium-13Niobium-13Zirconium Alloy for Surgical Implant Applications |
| ASTM F 1813 | 外科植入物用鍛壓的鈦-12鉬-6鋯-2鐵合金(UNS R58120)的標準規范 | Standard Specification for Wrought Titanium-12 Molybdenum-6 Zirconium-2 Iron Alloy for Surgical Implant (UNS R58120) |
| ASTM F 2004 | 用熱分析法測定鎳-鈦合金轉變溫度的標準試驗方法 | Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis |
| ASTM F 2005 | 鎳-鈦型記憶合金的標準術語 | Standard Terminology for Nickel-Titanium Shape Memory Alloys |
| ASTM F 2063 | 醫療器械和外科植入物用鍛造鎳鈦形狀記憶合金標準規范 | Standard Specification for Wrought Nickel-Titanium Shape Memory Alloys for Medical Devices and Surgical Implants |
| ASTM F 2066 | 外科植入物用鍛制鈦-15鉬合金的標準規范(UNS R58150) | Standard Specification for Wrought Titanium-15 Molybdenum Alloy for Surgical Implant Applications (UNS R58150) |
| ASTM F 2082 | 通過彎曲和自由回復試驗測定鎳鈦形狀記憶合金轉變溫度的標準試驗方法 | Standard Test Method for Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery |
| ASTM F 2146 | 外科移植物用鍛造鈦-3鋁-2.5釩合金無縫管的標準規范(UNS R56320) | Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy Seamless Tubing for Surgical Implant Applications (UNS R56320) |
| ASTM F 2229 | 外科植入物用鍛制氮增強23錳-21鉻-1鉬低鎳不銹鋼合金棒材和線材的標準規范(UNS S29108) | Standard Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108) |
| ASTM F 2281 | 耐熱及高溫設備用不銹鋼和鎳合金螺栓、六角頭螺釘和螺柱的標準規范 | Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications |
| ASTM F 2282 | 機械緊固件用碳鋼和合金鋼絲、桿材、棒材的質量保證要求的標準規范 | Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners |
| ASTM F 2329 | 碳鋼和合金鋼螺栓、螺釘、墊圈、螺母和特殊螺紋緊固件用熱浸鍍鋅覆層的標準規范 | Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners |
| ASTM F 2384 | 用于外科植入物的鍛造鋯-2.5鈮合金的標準規范 | Standard Specification for Wrought Zirconium-2.5Niobium Alloy for Surgical Implant Applications (UNS R60901) |
| ASTM F 2437 | 與螺旋帽、螺栓、錨和螺柱用碳和合金鋼可壓縮墊圈式直讀張力指示器的標準規范 | Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs |
| ASTM F 2527 | 外科植入物用鍛造無縫和焊接及拉制的鈷合金小直徑管的標準規范（UNS R30003、 UNS R30008、 UNS R30035、 U | Standard Specification for Wrought Seamless and Welded and Drawn Cobalt Alloy Small Diameter Tubing for Surgical Implants (UNS R30003, UNS R30008, UNS R30035, UNS R30605, and UNS R31537) |
| ASTM F 256 | 含有18%或26%鉻的鉻鐵焊接用合金的標準規范 | Standard Specification for Chromium-Iron Sealing Alloys with 18 or 28 Percent Chromium |
| ASTM F 2581 | 外科植入物用鍛制氮增強的11錳-17鉻-3鉬低鎳不銹鋼合金棒材和金屬絲的標準規范 | Standard Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225) |
| ASTM F 2633 | 醫療設備和外科植入物用可鍛無縫鎳鈦形狀記憶合金管標準規范 | Standard Specification for Wrought Seamless Nickel-Titanium Shape Memory Alloy Tube for Medical Devices and Surgical Implants |
| ASTM F 30 | 鐵鎳密封合金標準規范 | Standard Specification for Iron-Nickel Sealing Alloys |
| ASTM F 31 | 42%鎳6%鉻鐵焊接用合金的標準規范 | Standard Specification for 42% Nickel-6% Chromium-Iron Sealing Alloy |
| ASTM F 541 | 合金鋼有眼螺栓的標準規范 | Standard Specification for Alloy Steel Eyebolts |
| ASTM F 560 | 外科植入物用非合金鉭的標準規范(UNS R05200、UNS R05400) | Standard Specification for Unalloyed Tantalum for Surgical Implant Applications (UNS R05200, UNS R05400) |
| ASTM F 562 | 外科植入用鍛制35鈷-35鎳-20鉻-10鉬合金標準規范(UNS R30035) | Standard Specification for Wrought 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for Surgical Implant Applications (UNS R30035) |
| ASTM F 568M | 碳素和合金鋼外螺紋米制緊固件標準規范 | Standard Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners |
| ASTM F 620 | 外科植入用α加β鈦合金鍛件的標準規范 | Standard Specification for Alpha Plus Beta Titanium Alloy Forgings for Surgical Implants |
| ASTM F 67 | 外科植入用非合金鈦(UNS R50250、UNS R50400、UNS R50550、UNS R50700)標準規范 | Standard Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700) |
| ASTM F 688 | 外科植入物用鍛制鈷35鎳20鉻10鉬合金板、薄板及箔標準規范 | Standard Specification for Wrought Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Plate, Sheet, and Foil for Surgical Implants (UNS R30035) |
| ASTM F 73 | 電子器件及燈泡用鎢錸合金絲 | Standard Specification for Tungsten-Rhenium Alloy Wire for Electron Devices and Lamps |
| ASTM F 75 | 外科植入術用鈷28鉻6鉬鑄件和鑄造合金的標準規范 | Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants (UNS R30075) |
| ASTM F 799 | 外科移植物用鈷28鉻6鉬合金鍛件(UNS R31537、R31538、R31539)標準規范 | Standard Specification for Cobalt-28Chromium-6Molybdenum Alloy Forgings for Surgical Implants (UNS R31537, R31538, R31539) |
| ASTM F 835 | 合金鋼凹半圓頭及平頂沉頭六角螺釘?shù)臉?biāo)準規范 | Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws |
| ASTM F 835M | 合金鋼凹半圓頭及平頂沉頭六角螺釘(米制)標準規范 | Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws [Metric] |
| ASTM F 90 | 外科植入物用鍛造鈷-20鉻-15鎢-10鎳合金的標準規范 | Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy for Surgical Implant Applications (UNS R30605) |
| ASTM F 912 | 合金鋼凹頭定位螺釘?shù)臉?biāo)準規范 | Standard Specification for Alloy Steel Socket Set Screws |
| ASTM F 912M | 合金鋼凹頭定位螺釘(米制)的標準規范 | Standard Specification for Alloy Steel Socket Set Screws [Metric] |
| ASTM F 945 | 航空發動機清洗材料對鈦合金的應力腐蝕標準試驗方法 | Standard Test Method for Stress-Corrosion of Titanium Alloys by Aircraft Engine Cleaning Materials |
| ASTM F 96 | 鍛制的銅和鎳電子級合金 | Electronic Grade Alloys of Copper and Nickel in Wrought Forms |
| ASTM F 961 | 外科植入物用鈷鎳鉻鉬合金鍛件標準規范 | Standard Specification for Cobalt-35 Nickel-20 Chromium-10 Molybdenum Alloy Forgings for Surgical Implants [UNS R30035] |
| ASTM G 101 | 低合金鋼耐大氣腐蝕評估的標準指南 | Standard Guide for Estimating the Atmospheric Corrosion Resistance of Low-Alloy Steels |
| ASTM G 103 | 在6%沸騰的氯化鈉溶液中進行鋁鋅鎂低銅合金的應力腐蝕斷裂試驗的標準實施規程 | Standard Practice for Evaluating Stress-Corrosion Cracking Resistance of Low Copper 7XXX Series Al-Zn-Mg-Cu Alloys in Boiling 6% Sodium Chloride Solution |
| ASTM G 110 | 將鋁合金浸入氯化鈉和過氧化氫溶液中進行熱處理時抗晶粒間腐蝕的評定 | Evaluating Intergranular Corrosion Resistance of Heat Treatable Aluminum Alloys by Immersion in Sodium Chloride + Hydrogen Peroxide Solution |
| ASTM G 112 | 進行鋁合金的剝離腐蝕試驗 | Conducting Exfoliation Corrosion Tests in Aluminum Alloys |
| ASTM G 123 | 沸騰酸化氯化鈉溶液中不同鎳合量不銹鋼合金應力腐蝕裂紋評定的標準試驗方法 | Standard Test Method for Evaluating Stress-Corrosion Cracking of Stainless Alloys with Different Nickel Content in Boiling Acidified Sodium Chloride Solution |
| ASTM G 139 | 用破壞載荷法測定可熱處理鋁合金制品的抗應力腐蝕開裂特性的標準試驗方法 | Standard Test Method for Determining Stress-Corrosion Cracking Resistance of Heat-Treatable Aluminum Alloy Products Using Breaking Load Method |
| ASTM G 146 | 高壓、高溫精煉氫設備中使用的雙金屬不銹合金/鋼板材非連接性評定的標準實施規程 | Standard Practice for Evaluation of Disbonding of Bimetallic Stainless Alloy/Steel Plate for Use in High-Pressure, High-Temperature Refinery Hydrogen Service |
| ASTM G 157 | 評價化學加工工業用煅鐵和鎳基抗腐蝕合金腐蝕特性的標準指南 | Standard Guide for Evaluating the Corrosion Properties of Wrought Iron- and Nickel-Based Corrosion Resistant Alloys for the Chemical Process Industries |
| ASTM G 186 | 測定氣漏檢測器液體溶劑是否能引起黃銅合金應力腐蝕斷裂的標準試驗方法 | Standard Test Method for Determining Whether Gas-Leak-Detector Fluid Solutions Can Cause Stress Corrosion Cracking of Brass Alloys |
| ASTM G 188 | 黃銅和其他銅合金用檢漏儀溶液的標準規范 | Standard Specification for Leak Detector Solutions Intended for Use on Brasses and Other Copper Alloys |
| ASTM G 2/G 2M | 在750°F蒸汽中或在680°F水中鋯、鉿及其合金產品的腐蝕測試的標準試驗方法 | Standard Test Method for Corrosion Testing of Products of Zirconium, Hafnium, and Their Alloys in Water at 680°F [360°C]or in Steam at 750°F [400°C] |
| ASTM G 28 | 煅制富鎳鉻軸承合金晶間腐蝕敏感性的探測用標準試驗方法 | Standard Test Methods of Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys |
| ASTM G 34 | 2XXX和7XXX系列鋁合金剝落腐蝕敏感性的試驗方法(EXCO 試驗) | Standard Test Method for Exfoliation Corrosion Susceptibility in 2XXX and 7XXX Series Aluminum Alloys (EXCO Test) |
| ASTM G 35 | 不銹鋼及有關鎳鉻鐵合金在連多硫酸中應力腐蝕斷裂靈敏性測定的標準實施規程 | Standard Practice for Determining the Susceptibility of Stainless Steels and Related Nickel-Chromium-Iron Alloys to Stress-Corrosion Cracking in Polythionic Acids |
| ASTM G 36 | 評定在沸騰的氯化鎂溶液中金屬及其合金的抗應力腐蝕斷裂 | Standard Practice for Evaluating Stress-Corrosion-Cracking Resistance of Metals and Alloys in a Boiling Magnesium Chloride Solution |
| ASTM G 37 | 用pH值為7.2的瑪特松(mattsson's)溶液評價銅鋅合金的應力腐蝕斷裂靈敏性 | Standard Practice for Use of Mattsson's Solution of pH 7.2 to Evaluate the Stress- Corrosion Cracking Susceptibility of Copper-Zinc Alloys |
| ASTM G 44 | 在3.5%氯化鈉中性溶液中用交替浸漬法的金屬及合金暴露的標準實施規程 | Standard Practice for Exposure of Metals and Alloys by Alternate Immersion in Neutral 3.5% Sodium Chloride Solution |
| ASTM G 47 | 測定高強度鋁合金制品應力腐蝕斷裂敏感性的標準試驗方法 | Standard Test Method for Determining Susceptibility to Stress-Corrosion Cracking of 2XXX and 7XXX Aluminum Alloy Products |
| ASTM G 48 | 用氯化鐵溶液測定不銹鋼及有關合金耐點腐蝕和縫隙腐蝕的標準試驗方法 | Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution |
| ASTM G 52 | 金屬及合金在海水表面暴露與評定的標準實施規范 | Standard Practice for Exposing and Evaluating Metals and Alloys in Surface Seawater |
| ASTM G 61 | 鐵鎳鈷基合金的局部腐蝕敏感性的循環動電勢極化強度的試驗方法 | Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys |
| ASTM G 64 | 熱處理鋁合金抗應力腐蝕斷裂性的標準分類 | Standard Classification of Resistance to Stress-Corrosion Cracking of Heat-Treatable Aluminum Alloys |
| ASTM G 66 | 5XXX系列鋁合金的剝落腐蝕敏感性的外觀評定的試驗方法(ASSET試驗) | Standard Test Method for Visual Assessment of Exfoliation Corrosion Susceptibility of 5XXX Series Aluminum Alloys (ASSET Test) |
| ASTM G 67 | 用接觸硝酸環境之后的重量損失來測定5XXX系列鋁合金晶間腐蝕敏感性的標準試驗方法(NAMLT 試驗) | Standard Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss After Exposure to Nitric Acid (NAMLT Test) |
| ASTM G 69 | 測定鋁合金潛在腐蝕性 | Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys |
| ASTM G 78 | 海水及其它含氯化物的水環境中鐵基和鎳基不銹合金的裂隙腐蝕試驗的標準指南 | Standard Guide for Crevice Corrosion Testing of Iron-Base and Nickel-Base Stainless Alloys in Seawater and Other Chloride-Containing Aqueous Environments |
| 編號 | 中文名稱 | 英文名稱 |