微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ANSI Z136.1 Errata | 激光的安全使用.勘誤表 | Safe use of lasers; Errata |
| ANSI Z136.1 | 激光器的安全使用 | Safe Use of Lasers |
| ANSI Z136.2 | 激光二極管和LED光源的光纖通信系統的安全使用 | Safe Use of Optical Fiber Communication Systems Utilizing Laser Diode and LED Sources |
| ANSI Z136.3 | 保健設施中激光器的安全使用 | Safe Use of Lasers in Health Care Facilities |
| ANSI Z136.4 | 危害評定用激光器安全測量的美國國家標準推薦實施規程 | American National Standard Recommended Practice for Laser Safety Measurements for Hazard Evaluation |
| ANSI Z136.5 | 教育機構中激光設備的安全使用 | Safe Use of Lasers in Educational Institutions |
| ANSI Z136.6 | 戶外激光器的安全使用 | Safe Use of Lasers Outdoors |
| ANSI/ASME B89.4.19 | 基于球形坐標測量系統的激光器性能評價 | Performance Evaluation of Laser Based Spherical Coordinate Measurement Systems |
| ANSI/AWS C7.2 | 激光束焊接、切割和打孔推薦規程 | Recommended Practices for Laser Beam Welding, Cutting, and Drilling |
| ANSI/EIA/TIA 455-127 | 多模激光器的光譜特征 | Spectral Characterization of Multimode Lasers |
| ANSI/EIA/TIA 455-48B | 光纖包覆層直徑的激光類儀器測量 | Measurement of Optical Fiber Cladding Diameter Using Laser-Based Instruments |
| ANSI/NFPA 115 | 激光器防火措施 | Laser Fire Protection |
| ANSI/TIA-455-130 | 激光二極管的高溫壽命試驗 | Elevated Temperature Life Test for Laser Diodes |
| ANSI/TIA-455-48B | 利用激光儀器測量光纖包覆層直徑 | Measurement of Optical Fiber Cladding Diameter Using Laser-Based Instruments |
| ANSI/TIA-568-B.1-4 | 商用建筑電信電纜敷設標準.第1部分:一般要求.補充件4. 第6類850nm激光優選的50/125微米多模纖維的鑒別 | Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 4 - Recognition of Category 6 and 850 nm laser-Optimized 50/125 Micron Multi-mode Fiber |
| ANSI/TIA/EIA 455-128 | 半導體激光器閾值電流的測定程序 | Procedures for Determining Threshold Current of Semiconductor Lasers |
| ANSI/TIA/EIA 455-130 | 激光二極管的抗高溫壽命試驗 | Elevated Temperature Life Test for Laser Diodes |
| ANSI/TIA/EIA 455-48B | 用激光測量?jī)x測量光纖連皮直徑 | Measurement of Optical Fiber Cladding Diameter Using Laser-Based Instruments |
| ANSI/TIA/EIA 568-B.1-4 | 商用建筑電信電纜敷設標準.第1部分:一般要求.附錄4.類別6、850nm激光優選50/125微米多模纖維 | Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 4 - Recognition of Category 6 and 850 nm laser-Optimized 50/125 Micron Multi-mode Fiber |
| ASTM A 1006/A 1006M | 激光束焊、平頭、無鍍層、鋼制總管的標準規范 | Standard Specification for Steel Line Pipe, Black, Plain End, Laser Beam Welded |
| ASTM C 1070 | 用激光擴散法測定氧化鋁和石英粒度分布的試驗方法 | Test Method for Determining Particle Size Distribution of Alumina or Quartz by Laser Light Scattering |
| ASTM D 3460 | 有白色水印和無水印的票據、油印機、復印機、復照和激光打印機用按尺寸切割的辦公用紙的標準規范 | Standard Specification for White Watermarked and Unwatermarked Bond, Mimeo, Spirit Duplicator, Reprographic, and Laser Printer Cut-Sized Office Papers |
| ASTM D 4464 | 激光散射測定催化材料粒度分布的標準試驗方法 | Standard Test Method for Particle Size Distribution of Catalytic Material by Laser Light Scattering |
| ASTM D 5174 | 用脈沖激光磷光光度法測定水中微量鈾的標準試驗方法 | Standard Test Method for Trace Uranium in Water by Pulsed-Laser Phosphorimetry |
| ASTM D 6187 | 帶有氮激光感應熒光的石油污染位點的錐形透度計技術特性的標準操作規程 | Standard Practice for Cone Penetrometer Technology Characterization of Petroleum Contaminated Sites with Nitrogen Laser-Induced Fluorescence |
| ASTM D 6466 | 用Sirolan激光掃描纖維直徑分析儀測定羊毛和其它動物纖維直徑的標準試驗方法 | Standard Test Method for Diameter of Wool and Other Animal Fibers By Sirolan-Laserscan Fiber Diameter Analyser |
| ASTM D 7134 | 用矩陣輔助激光解吸/離子化(MALDI)-飛行時間(TOF)質譜(MS)法測定無規立構聚苯乙烯的平均分子量和分子量分布 | Standard Test Method for Molecular Mass Averages and Molecular Mass Distribution of Atactic Polystyrene by Matrix Assisted Laser Desorption/Ionization (MALDI)-Time of Flight (TOF) Mass Spectrometry (MS) |
| ASTM D 7153 | 航空燃料凍結點的標準試驗方法(自動激光法) | Standard Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method) |
| ASTM E 1458 | 用光掩模原版校準檢驗激光繞射粒子定尺寸儀器的試驗方法 | Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask Reticles |
| ASTM F 1364 | 使用校準設備驗證干涉激光成像無損輪胎檢驗系統檢驗?zāi)芰Φ臉?biāo)準實施規范 | Standard Practice for Use of a Calibration Device to Demonstrate the Inspection Capability of an Interferometric Laser Imaging Nondestructive Tire Inspection System |
| ASTM F 1457 | 與激光打印機相關的術語 | Standard Terminology Relating to Laser Printers |
| ASTM F 1457b | 與激光打印機相關的標準術語 | Standard Termninology Relating to Laser Printers |
| ASTM F 1497a | 導管軸耐激光性能測定的標準試驗方法 | Standard Test Method for Determining Laser Resistance of the Shaft of Tracheal Tubes |
| ASTM F 1628 | 激光外科學用套箍和未套箍氣管導管及有關治療的標記和標志的標準規范 | Standard Specification for Labeling and Marking of Cuffed and Uncuffed Tracheal Tubes and Related Treatments Intended for Use During Laser Surgery |
| IEEE 647 | 單軸激光陀螺規格導則和試驗規程 | (Format guide and test procedure for single-axis laser gyros) |
| 編號 | 中文名稱 | 英文名稱 |