| 編號 | 中文名稱 | 英文名稱 |
| ANSI B109.4
| 自動膜式天然氣工作調節器
| Self-Operated Diaphragm-Type Natural Gas Service Regulators
|
| ANSI Z21.18
| 煤氣裝置的壓力調節器(同 CSA 6.3)
| Gas Appliance Pressure Regulators (same as CSA 6.3)
|
| ANSI Z21.80
| 線性壓力調節器(同CSA 6.22)
| Line Pressure Regulators (same as CSA 6.22)
|
| ANSI Z21.80a
| 管路壓力調節器
| Line Pressure Regulators (Same as CSA 6.22a)
|
| ANSI/AHAM RAC-1
| 房間空氣調節器
| Room Air Conditioners
|
| ANSI/ASHRAE 127
| 計算機與數據處理間單體氣調節器分級測試方法
| Method of Testing for Rating computer and Data Processing Room Unitary Air Conditioners
|
| ANSI/ASTM F1201
| 0oF以上的管道設備中流體調節器配件的規范
| Specification for Fluid Conditioner Fittings in Piping Applications Above 0oF
|
| ANSI/FCI 70-3
| 調節器座泄漏
| Regulator Seat Leakage
|
| ANSI/FCI 99-2
| 減壓調節器能力
| Pressure Reducing Regulator Capacity
|
| ANSI/IEEE 62
| 電力設備的診斷現場試驗指南.第1部分:充油電力變壓器、調節器和電抗器
| Guide for Diagnostic Field Testing of Electric Power Apparatus - Part 1: Oil Filled Power Transformers, Regulators, and Reactors
|
| ANSI/IEEE 958
| 發電站中2400至13800V輔助系統上可調速交流傳動裝置的應用指南
| Guide for Application of AC Adjustable-Speed Drives on 2,400 to 13,800 Volt Auxiliary Systems in Electric Power Generating Stations
|
| ANSI/NEMA 61800-1
| 可調速電力驅動系統.第1部分:一般要求.低壓可調速直流電驅動系統的額定值規范
| Adjustable Speed Electrical Power Drive Systems - Part 1: General Requirements - Rating Specifications for Low Voltage Adjustable Speed d.c. Power Drive Systems
|
| ANSI/UL 252
| 壓縮氣體調節器
| Compressed Gas Regulators
|
| ANSI/UL 252A
| 壓縮氣體調節器附件
| Compressed Gas Regulator Accessories
|
| ANSI/UL 484
| 房間空氣調節器的安全標準
| Standard for Safety for Room Air Conditioners
|
| ASTM F 1201
| 溫度大于零華氏度的管道用流體調節器配件
| Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F
|
| ASTM G 175
| 醫療和應急設備用氧氣調節器的引燃敏感性和耐故障性評價的標準試驗方法
| Standard Test Method for Evaluating the Ignition Sensitivity and Fault Tolerance of Oxygen Regulators Used for Medical and Emergency Applications
|
| IEEE 62
| 電力裝置鑒別現場試驗指南.第1部分:油浸式電力變壓器,調節器和電抗器
| (Guide for diagnostic field testing of electrical power apparatus - Part 1: Oil filled power transformers, regulators, and reactors)
|
| UL 252
| 加壓縮煤氣調節器
| (Compressed gas regulators )
|
| UL 252A
| 壓縮氣體調節器附件
| (Compressed gas regulator accessories )
|
| UL 60730-2-11A
| 家用和類似用途的自動電氣控制裝置.第2部分:能量調節器的特殊要求
| (Automatic electrical controls for household and similar use - Part 2: Particular requirements for energy regulators )
|
| UL 873
| 溫度指示和調節器
| (Temperature-indicating and -regulating equipment )
|
| 編號 | 中文名稱 | 英文名稱 |