微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ANSI/ASTM B799 | 亞硫酸/二氧化硫蒸氣測定金和鈀鍍層孔隙度的方法 | Test Method for Porosity in Gold and Palladium Coatings by Sulfurous Acid/Sulfur-Dioxide Vapor |
| ANSI/AWS C2.23/C 2.23M | 鋁、鋅及其合金的熱噴鍍層(金屬化處理)和鋼防腐蝕保護復合材料的應用規范 | Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys and Composites for the Corrosion Protection of Steel |
| ANSI/EIA 364-48 | 接插件金屬鍍層厚度測量的測試程序 | Test Procedure for Metallic Coating Thickness Measurements of Contacts |
| ASME B32.1 | 無鍍層金屬薄板的最佳厚度(0.250英寸及以下) | (Preferred thicknesses for uncoated thin flat metals (under 0,250 In.)) |
| ASTM A 1005/A 1005M | 雙埋弧焊、縱向和螺旋焊縫、平頭、無鍍層、鋼制總管的標準規范 | Standard Specification for Steel Line Pipe, Black, Plain End, Longitudinal and Helical Seam, Double Submerged-Arc Welded |
| ASTM A 1006/A 1006M | 激光束焊、平頭、無鍍層、鋼制總管的標準規范 | Standard Specification for Steel Line Pipe, Black, Plain End, Laser Beam Welded |
| ASTM A 309 | 用三點試驗法測定長鍍鋅薄鋼板鍍層重量和成分的標準試驗方法 | Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test |
| ASTM A 562/A 562M | 玻璃或擴散金屬鍍層的壓力容器用錳鈦合金碳素鋼板 | Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings |
| ASTM A 879/A 879M | 每面鍍層質量應予標明的電解鍍鋅薄鋼板標準規范 | Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface |
| ASTM A 90/A 90M | 鍍鋅和鍍鋅合金鋼鐵制品鍍層重量的標準試驗方法 | Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings |
| ASTM A 918 | 每面鍍層質量應予標明的電解鍍鋅鎳合金薄鋼板標準規范 | Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface |
| ASTM B 136 | 鋁表面陽極鍍層的著色阻力的測定方法 | Standard Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum |
| ASTM B 200 | 鋼及鐵合金表面鉛和鉛錫合金的電解沉積鍍層標準規范 | Standard Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys |
| ASTM B 244 | 用渦流儀器測量鋁陽極鍍層及其它非磁性基底金屬絕緣鍍層的厚度標準試驗方法 | Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments |
| ASTM B 252 | 電鍍層和轉化涂層用鋅合金壓模鑄件的制備 | Preparation of Zinc Alloy Die Castings for Electroplating and Conversion Coatings |
| ASTM B 281 | 電鍍層和轉化鍍層用銅和銅基合金的制備 | Preparation of Copper and Copper-Base Alloys for Electroplating and Conversion Coatings |
| ASTM B 380 | 裝飾電鍍層的涂膏密室耐蝕試驗標準試驗方法范 | Standard Test Method of Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure |
| ASTM B 456 | 銅+鎳+鉻及鎳+鉻的電解沉積鍍層標準規范 | Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium |
| ASTM B 457 | 鋁表面陽極鍍層阻抗測定的標準試驗方法 | Standard Test Method for Measurement of Impedance of Anodic Coatings on Aluminum |
| ASTM B 489 | 金屬表面電解沉積和自動催化沉積金屬鍍層延展性的彎曲試驗 | Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals |
| ASTM B 499 | 用磁性法測量磁性基底金屬的非磁性鍍層厚度的標準試驗方法 | Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals |
| ASTM B 504 | 用庫侖法測量金屬鍍層厚度的試驗方法 | Standard Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method |
| ASTM B 555 | 用滴定試驗法測量電解沉積金屬鍍層厚度 | Standard Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by the Dropping Test |
| ASTM B 578 | 電鍍層顯微硬度的標準試驗方法 | Standard Test Method for Microhardness of Electroplated Coatings |
| ASTM B 579 | 錫鉛合金的電解沉積鍍層(焊接板) | Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate) |
| ASTM B 580 | 鋁陽極氧化鍍層 | Anodic Oxide Coatings on Aluminum |
| ASTM B 604 | 塑料表面裝飾用銅加鎳鉻鍍層標準規范 | Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics |
| ASTM B 605a | 錫鎳合金電解沉積鍍層標準規范 | Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy |
| ASTM B 634 | 工程用銠電解沉積鍍層 | Standard Specification for Electrodeposited Coatings of Rhodium for Engineering Use |
| ASTM B 635 | 鎘錫機械沉積鍍層標準規范 | Standard Specification for Coatings of Cadmium-Tin Mechanically Deposited |
| ASTM B 636 | 用螺旋收縮儀測量電鍍金屬鍍層內應力的方法 | Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer |
| ASTM B 659 | 金屬和無機物鍍層厚度的測量方法 | Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings |
| ASTM B 680 | 用酸溶解法測定鋁的陽極鍍層封閉質量的試驗方法 | Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution |
| ASTM B 681 | 用光截面顯微鏡測量鋁陽極鍍層厚度及不透明表面的其它透明涂層厚度的試驗方法 | Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Transparent Coatings on Opaque Surfaces Using the Light-Section Microscope |
| ASTM B 695 | 鋼鐵表面的鋅機械沉積鍍層標準規范 | Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel |
| ASTM B 696 | 鎘機械沉積鍍層標準規范 | Standard Specification for Coatings of Cadmium Mechanically Deposited |
| ASTM B 697 | 電沉積金屬鍍層和無機鍍層檢驗用抽樣方法的選擇 | Selection of Sampling Plans for Inspection of Electrodeposited Metallic and Inorganic Coatings |
| ASTM B 699 | 鋼鐵表面鎘真空沉積鍍層標準規范 | Standard Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel |
| ASTM B 764 | 多層鎳鍍層中單層的同步厚度和電極電勢測定的標準試驗方法(STEP試驗) | Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test) |
| ASTM B 765 | 電鍍層和相關金屬鍍層孔隙率和總?cè)毕菰囼?yàn)選擇的標準指南 | Standard Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and Related Metallic Coatings |
| ASTM B 799 | 用亞硫酸/SO2蒸汽測試金和鈀鍍層孔隙度的標準試驗方法 | Standard Test Method for Porosity in Gold and Palladium Coatings by Sulfurous Acid/Sulfur-Dioxide Vapor |
| ASTM B 840 | 鋅鈷合金沉積物用電解鍍層標準規范 | Standard Specification for Electrodeposited Coatings for Zinc Cobalt Alloy Deposits |
| ASTM B 841 | 鋅鎳合金沉積物用電解鍍層標準規范 | Standard Specification for Electrodeposited Coatings for Zinc Nickel Alloy Deposits |
| ASTM B 842 | 鋅鐵合金沉積物用電解鍍層標準規范 | Standard Specification for Electrodeposited Coatings for Zinc Iron Alloy Deposits |
| ASTM B 850 | 對鋼鍍層后處理以減小氫脆變危險的標準指南 | Standard Guide for Post-Coating Treatments of Steel for Reducing the Risk of Hydrogen Embrittlement |
| ASTM B 867 | 工程用鈀-鎳電鍍層的標準規范 | Standard Specification for Electrodeposited Coatings of Palladium-Nickel for Engineering Use |
| ASTM B 874 | 用于固體滲金屬處理的鉻擴散鍍層的標準規范 | Standard Specification for Chromium Diffusion Coating Applied by Pack Cementation Process |
| ASTM C 1349 | 建筑用聚碳酸酯鍍層平板玻璃的標準規范 | Standard Specification for Architectural Flat Glass Clad Polycarbonate |
| ASTM D 5367 | 用水或水/磨料噴洗時為防止鋼生銹用抑制劑處理的表面上鍍層評定的標準規范 | Standard Practice for Evaluating Coatings Applied Over Surfaces Treated With Inhibitors Used to Prevent Flash Rusting of Steel When Water or Water/Abrasive Blasted |
| ASTM D 5794 | 用離子色譜法測定電離子鍍層滲透率的標準導則 | Standard Guide for Determination of Anions in Cathodic Electrocoat Permeates by Ion Chromatography |
| ASTM D 6676 | 用內部加熱測定高溫下外部管道鍍層的陰極斷接的標準試驗方法 | Standard Test Method for Cathodic Disbonding of Exterior Pipeline Coatings at Elevated Temperatures Using Interior Heating |
| ASTM F 1135 | 緊固件用鉻酸鎘或鋅有機防蝕鍍層標準規范 | Standard Specification for Cadmium or Zinc Chromate Organic Corrosion Protective Coating for Fasteners |
| ASTM F 1136 | 緊固件用鋅/鋁防蝕鍍層的標準規范 | Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners |
| ASTM F 1941M | 螺紋緊固件電鍍層的標準規范(米制) | Standard Specification for Electrodeposited Coatings on Threaded Fasteners [Metric] |
| ASTM F 2024 | 羥磷灰石等離子噴鍍層相含量的X射線衍射測定標準實施規范 | Standard Practice for X-ray Diffraction Determination of Phase Content of Plasma-Sprayed Hydroxyapatite Coatings |
| ASTM G 18 | 鍍層管道連接件,配件及搭接板的試驗方法 | Test Method for Joints, Fittings and Patches in Coated Pipelines |
| ASTM G 33 | 金屬鍍層鋼樣品對大氣腐蝕檢測數據的記錄的標準操作規程 | Standard Practice for Recording Data from Atmospheric Corrosion Tests of Metallic-Coated Steel Specimens |
| 編號 | 中文名稱 | 英文名稱 |