微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| BS 2000-450 | 石油及其制品的試驗方法.柴油.用高頻往復式裝置評定燃油的潤滑性.試驗方法 | Methods of test for petroleum and its products - Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Test method |
| BS 3818 | 柴油機車及有軌內燃機車自動密封加油接頭規范 | Specification for self-sealing fuelling couplings for diesel locomotives and diesel railcars |
| BS 6380 | 符合BS EN 590和BS 2869 A2級及D級柴油機燃料和煤氣油的低溫性能和寒冷氣候使用指南 | Guide to low temperature properties and cold weather use of diesel fuels and gas oils conforming to BS EN 590 and classes A2 and D of BS 2869 |
| BS 6680 | 煤礦和其他沼氣敏感礦用柴油機防火設備規范 | Specification for flameproof equipment for diesel engines for use in coal mines and other mines susceptible to firedamp |
| BS AU 141a | 道路車輛用柴油機性能規范 | Specification for the performance of diesel engines for road vehicles |
| BS AU 261 | 柴油發動機.60度錐孔的高壓噴油管端部連接器 | Diesel engines. High-pressure fuel injection pipe end-connections with 60 female cone |
| BS CWA 15145 | 機動車燃料.內燃機用柴油乳劑中的水.要求和試驗方法 | Automotive fuels - Water in diesel fuel emulsions for use in internal combustion engines - Requirements and test methods |
| BS DD ISO/TS 23556 | 去除潤滑油中柴油機煙灰用裝置的性能試驗方法.初始過濾效率 | Performance test method for diesel engine soot-removal devices in lubricating oils - Initial filtration efficiency |
| BS EN 116 | 柴油和家用加熱用燃料.冷式過濾器堵塞點的確定 | Diesel and domestic heating fuels - Determination of cold filter plugging point |
| BS EN 12662 | 石油及其產品的試驗方法.液態石油產品.柴油中污染物的測定 | Methods of test for petroleum and its products - Liquid petroleum products - Determination of contamination in middle distillates |
| BS EN 12827 | 內河航運船只.柴油傳送裝置用的連接件 | Inland navigation vessels - Connections for the transfer of diesel oil |
| BS EN 13341 | 家用燃料油、煤油和柴油燃料的地上存儲用熱塑性固定儲油罐.通過陰離子聚合吹塑聚乙烯儲油罐、旋轉模制聚乙 | Thermoplastics static tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded polyethylene, rotationally moulded polyethylene and polyamide 6 by anionic polymerization tanks - Requirements and test methods |
| BS EN 14214 | 機動車燃料.柴油發動機用脂肪酸甲脂.要求和試驗方法 | Automotive fuels - Fatty acid methylesters (FAME) for diesel engines - Requirements and test methods |
| BS EN 14274 | 石油及其產品的試驗方法.車用燃料.汽油及柴油質量的評估.燃料質量監測系統(FQMS) | Methods of test for petroleum and its products - Automotive fuels - Assessment of petrol and diesel quality - Fuel quality monitoring system (FQMS) |
| BS EN 14275 | 車用燃料.汽油及柴油質量的評估.零售點油泵及商業點燃料自動售貨機的抽樣 | Automotive fuels - Assessment of petrol and diesel fuel quality - Sampling from retail site pumps and commercial site fuel dispensers |
| BS EN 14530 | 工作場所空氣.柴油顆粒物質的測定.一般要求 | Workplace atmospheres - Determination of diesel particulate matter - General requirements |
| BS EN 590 | 機動車燃料.柴油.要求和試驗方法 | Automotive fuels - Diesel - Requirements and test methods |
| BS EN ISO 12156-1 | 柴油.用高頻往復裝置(HFRR)進行潤滑性能評定.試驗方法 | Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Test method |
| BS EN ISO 13759 | 石油和石油產品的試驗方法.石油產品.柴油燃料中硝酸烷基酯的測定.光譜法 | Methods of test for petroleum and its products - Petroleum products - Determination of alkyl nitrate in diesel fuels - Spectrometric method |
| BS EN ISO 16147 | 小艇.艇內柴油發動機.裝在發動機上的燃油和電氣元件 | Small craft - Inboard diesel engines - Engine-mounted fuel and electrical components |
| BS EN ISO 20844 | 石油和相關產品.使用柴油注射器噴嘴測定含聚合物油的剪切穩定性 | Petroleum and related products - Determination of the shear stability of polymer-containing oils using a diesel injector nozzle |
| BS EN ISO 21487 | 小艇.永久性安裝的汽油和柴油燃油罐 | Small craft - Permanently installed petrol and diesel fuel tanks |
| BS EN ISO 5165 | 石油產品.柴油點火質量的測定.十六烷發動機法 | Petroleum products - Determination of the ignition quality of diesel fuels - Cetane engine method |
| BS EN ISO 6246 | 石油產品.輕餾分燃料和柴油燃料的含膠量.噴射蒸發法 | Petroleum products - Gum content of light and middle distillate fuels - Jet evaporation method |
| BS EN ISO 8861 | 造船.柴油機船舶發動機室的通風.設計要求和計算依據 | Shipbuilding - Engine-room ventilation in diesel-engined ships - Design requirements and basis of calculations |
| BS ISO 12156-2 | 柴油.用高頻往復裝置(HFRR)進行潤滑油評定.極限值 | Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Limit |
| BS ISO 12345 | 柴油發動機.燃料噴射設備的清潔度評定 | Diesel engines - Cleanliness assessment of fuel injection equipment |
| BS ISO 13296 | 柴油發動機.高壓燃料噴射管組件.一般要求和尺寸 | Diesel engines - High-pressure fuel injection pipe assemblies - General requirements and dimensions |
| BS ISO 13555-1 | 柴油發動機.柴油噴注設備動態調速的檢查程序.預調節 | Diesel engines - Procedure for checking the dynamic timing of diesel fuel injection equipment - Preconditioning |
| BS ISO 13555-2 | 柴油機.柴油機噴油系統動態定時的檢查程序.試驗方法 | Diesel engines - Procedure for checking the dynamic timing of diesel fuel injection equipment - Test method |
| BS ISO 13555-3 | 柴油發動機.柴油噴射設備動態計時的檢驗規程.計時設備的驗證 | Diesel engines - Procedure for checking the dynamic timing of diesel fuel injection equipment - Validation of timing devices |
| BS ISO 14681 | 柴油發動機.燃料噴射泵試驗.燃料噴嘴的校準 | Diesel engines - Fuel injection pump testing - Calibrating fuel injectors |
| BS ISO 19438 | 內燃機用柴油燃料和汽油過濾器.用粒子計數和污物滯留量測定過濾效率 | Diesel fuel and petrol filters for internal combustion engines - Filtration efficiency using particle counting and contaminant retention capacity |
| BS ISO 22241-1 | 柴油發動機.NOx還原劑AUS 32.質量要求 | Diesel engines - NOx reduction agent AUS 32 - Quality requirements |
| BS ISO 22241-2 | 柴油發動機.NOx還原劑AUS 32.試驗方法 | Diesel engines - NOx reduction agent AUS 32 - Test methods |
| BS ISO 2697 | 柴油發動機.燃料噴嘴."S"尺寸 | Diesel engines - Fuel nozzles - Size "S" |
| BS ISO 2974 | 柴油機.60°錐孔的高壓油管接頭管端部連接 | Diesel engines - High-pressure fuel injection pipe end-connections with 60 ° female cone |
| BS ISO 4010 | 柴油發動機.針栓型滯后校準噴嘴 | Diesel engines - Calibrating nozzle, delay pintle type |
| BS ISO 4020 | 道路車輛.柴油發動機的燃油濾清器.試驗方法 | Road vehicles - Fuel filters for diesel engines.Test methods |
| BS ISO 4093 | 柴油發動機.噴油泵.試驗用高壓管 | Diesel engines - Fuel injection pumps - High-pressure pipes for testing |
| BS ISO 6519 | 柴油機.噴油泵.軸端和轂盤的錐度 | Diesel engines - Fuel injection pumps - Tapers for shaft ends and hubs |
| BS ISO 7026 | 柴油發動機.S1規格B型針栓式噴嘴的20、21、21.1和27型擰入式噴嘴固定器 | Diesel engines - Screw-in injection nozzle holders, types 20, 21, 21.1 and 27 for pintle nozzle size 'S1' type 'B' |
| BS ISO 7299-1 | 柴油發動機.泵用端面安裝法蘭.燃料油噴射泵 | Diesel engines - End-mounting flanges for pumps - Fuel injection pumps |
| BS ISO 7299 | 柴油發動機.燃油噴射泵用端面安裝法蘭 | Diesel engines - End-mounting flanges for fuel injection pumps |
| BS ISO 7612 | 柴油機.共軌燃料噴射系統用基座安裝直列式噴油泵和高壓供油泵.安裝尺寸 | Diesel engines - Base-mounted in-line fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems - Mounting dimensions |
| BS ISO 7654 | 道路車輛.柴油發動機用離心式燃油過濾器.安裝和連接尺寸 | Road vehicles - Spin-on fuel filters for diesel engines - Mounting and connecting dimensions |
| BS ISO 7879 | 柴油發動機.托架安裝直列式燃料噴射泵.安裝尺寸 | Diesel engines - Cradle mounted in-line fuel injection pumps - Mounting dimensions |
| BS ISO 8535-1 | 柴油發動機.高壓注射燃油管道用鋼管.無縫冷拔單壁管要求 | Diesel engines - Steel tubes for high-pressure fuel injection pipes - Requirements for seamless cold-drawn single-wall tubes |
| BS ISO 9102 | 柴油發動機.24、25、26和26.1型擰入式噴嘴底座 | Diesel engines - Screw-in injection nozzle holders types 24, 25, 26 and 26.1 |
| 編號 | 中文名稱 | 英文名稱 |