微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| DIN 1055-10 | 結構物的設計基礎和作用.第10部分:起重機和機械引起的作用 | Basis of design and action on structures - Part 10: Actions induced by cranes and machinery |
| DIN 15001-1 | 起重機.第1部分:詞匯、按型號的分類 | Cranes; Vocabulary, classification according to type |
| DIN 15001-2 | 起重機:第2部分:詞匯.按用途分類 | Cranes; Vocabulary, classification according to application |
| DIN 15002 | 起重機.承載裝置.詞匯 | Lifting appliances; Load carrying devices; Vocabulary |
| DIN 15018-1 | 起重機.鋼結構.驗證和計算 | Cranes; steel structures; verification and analyses |
| DIN 15018-2 | 起重機.鋼結構.設計與制造原則 | Cranes; steel structures; principles of design and construction |
| DIN 15018-3 | 起重機.有關鋼結構的原理.車載起重機的計算 | Cranes; principles relating to steel structures; design of cranes on vehicles |
| DIN 15019-1 | 起重機.第1部分:除無軌安裝移動式起重機和浮吊之外的所有起重機的穩定性 | Cranes; Stability for All Cranes Except Non-rail Mounted Mobile Cranes and Except Floating Cranes |
| DIN 15019-2 | 起重機.無軌安裝移動式起重機的穩定性 第2部分:試驗載荷與計算 | Cranes; Stability for Non Rail-mounted Mobile Cranes; Test Loading and Calculation |
| DIN 15020-2 | 起重機.第2部分:鋼索傳動原則.使用中監視 | Lifting Appliances; Principles Relating to Rope Drives; Supervision during Operation |
| DIN 15022 | 起重機.提升高度.作業速度 | Cranes; lifting hights, operating speeds |
| DIN 15023 | 起重機.懸臂起重機和帶懸臂梁的龍門式起重機.工作半徑 | Cranes; slewing cranes and portal cranes with cantilever, radii |
| DIN 15024 | 起重機和系列起重設備.雙梁起重機的軌距（中心至中心） | Cranes and serial lifting appliances, track gauges (center to center) for double girder crabs |
| DIN 15025 | 起重機.起重機駕駛室內操縱桿的操縱方向和配置 | Cranes; Direction of actuation and arrangement of controls in crane cabins |
| DIN 15049 | 帶有電動葫蘆或類似提升絞車的起重機.帶滑動軸承的軌道輪 | Cranes with electric hoists or similar hoist gear; track wheels with plain bearings |
| DIN 15050 | 人工操作起重機.帶滾動軸承的軌道輪 | Hand-driven cranes; track wheels with roller bearings |
| DIN 15053 | 起重機.減速齒輪、連接尺寸、外形規格、輸出力矩 | Cranes; reduction gears, connecting dimensions, contour gauges, output torques |
| DIN 15055 | 煉鋼廠、軋鋼機和起重機.用油壓的過盈配合.用途、尺寸、結構 | Steelworks, rolling mills and cranes; interference fits using oil under pressure; application, dimensions, design |
| DIN 15057 | 起重機.滾珠和滾柱軸承的蓋.連接尺寸 | Cranes; covers for ball and roller bearings, connecting dimensions |
| DIN 15061-1 | 起重機.繩索槽輪的槽剖面 | Lifting appliances; groove profiles for wire rope sheaves |
| DIN 15061-2 | 起重機.鋼絲繩卷筒上的槽形 | Cranes; groove profiles for wire rope drums |
| DIN 15062-1 | 起重機.繩輪.選擇范圍和直徑與寬度的配合 | Cranes; rope pulleys; selected ranges and correlation of diameters and overall widths |
| DIN 15062-2 | 起重機.繩輪.軸承和輪轂尺寸 | Cranes; rope pulleys; dimensions of hubs and bearings |
| DIN 15070 | 提升設備.起重機軌道輪的計算 | Cranes; basic calculation of crane rail wheels |
| DIN 15071 | 提升設備.起重機軌道輪的承載的測定 | Cranes; determination of bearing load of crane rail wheels |
| DIN 15072 | 起重機.起重機軌道輪的觸軌面輪廓和不同軌輪直徑軌道的數據表 | Cranes; tread profile of crane rail wheels and table of rails for different wheel diameters |
| DIN 15073 | 起重機.導頻軌道輪的一覽表 | Cranes; table of crane rail wheels |
| DIN 15074 | 起重機..無齒輪帶滑動軸承的起重機凸緣導軌輪 | Cranes; flanged crane rail wheels with plain bearings, without gear wheel |
| DIN 15075 | 起重機.帶齒輪的裝有關節軸承的有法蘭的起重機軌道輪 | Cranes; flanged crane rail wheels, with plain bearings, with gear wheel |
| DIN 15076 | 起重機.不帶齒輪的裝有關節軸承的帶輪胎的有法蘭的起重機軌道輪 | Cranes; flanged crane rail wheels with tyre, with plain bearings, without gear wheel |
| DIN 15077 | 起重機.帶滑動軸承和齒輪的帶輪箍的起重機凸緣導軌輪. | Cranes; flanged crane rail wheels with tyre, with plain bearings, with gear wheel |
| DIN 15078 | 起重機.不帶齒輪的裝有滾子軸承的有法蘭的起重機軌道輪 | Cranes; flanged crane rail wheels, with roller bearings, without gear wheel |
| DIN 15079 | 起重機.帶滾柱軸承和齒輪的起重機帶凸緣導軌輪 | Cranes; flanged crane rail wheels, with roller bearings, with gear wheel |
| DIN 15080 | 起重機.帶滾柱軸承、無齒輪、帶輪箍的起重機凸緣導軌輪 | Cranes; flanged crane rail wheels with tyre, with roller bearings, without gear wheel |
| DIN 15081 | 起重機.帶滾柱軸承、齒輪、帶輪箍的起重機帶凸緣導軌輪 | Cranes; flanged crane rail wheels with tyre, with roller bearings, with gear wheel |
| DIN 15082-1 | 起重機.軌道輪.螺旋連接的齒輪 | Cranes; crane rail wheels, screwed-on gear wheels |
| DIN 15082-2 | 起重機.與大齒輪壓配合的帶滾柱軸承的起重機軌道輪 | Cranes; crane rail wheels with roller bearings, pressed-on gear wheels |
| DIN 15083 | 起重機；起重機導軌輪、機加的輪箍 | Cranes; crane rail wheels, machined tyres |
| DIN 15084 | 起重機.帶滾柱軸承起重機導軌輪.軸承蓋 | Cranes; crane rail wheels with roller bearings, bearing covers |
| DIN 15086 | 起重機.裝有軸套補償滾子軸承的起重機軌道輪. | Crane; crane rail wheels with roller bearings, flattening of axle bushes |
| DIN 15090 | 起重機.驅動輪裝置及從動輪裝置.組裝 | Cranes; driving wheel units and idler wheel units; assembly |
| DIN 15091 | 起重機.主動輪組和從動輪組.走輪軸 | Cranes; driving wheel units and idler wheel units; travelling wheel shafts |
| DIN 15092 | 起重機.驅動輪裝置及從動輪裝置.密封蓋 | Cranes; driving wheel units and idler wheel units; sealing covers |
| DIN 15093 | 起重機.主動輪組和從動輪組.走輪 | Cranes; driving wheel units and idler wheel units; travelling wheels |
| DIN 15094 | 起重機.主動輪組和從動輪組.軸承罩環 | Cranes; driving wheel units and idler wheel units; bearing cage rings |
| DIN 15095 | 起重機.驅動和轉動軸.安全盤、套筒、連接管 | Cranes; driven and rotating axles; securing discs, bushes, nipples |
| DIN 15400 | 起重吊鉤.材料、機械特性、承載能力和應力 | Lifting hooks; materials, mechanical properties, lifting capacity and stresses |
| DIN 15401-2 | 起重機用吊鉤.單鉤.帶螺紋軸的成品件 | Lifting hooks for lifting appliances; Single hooks; Finished parts with threaded shank |
| DIN 15402-1 | 起重機用吊鉤.（Ramshorn hooks）雙鉤.毛坯件 | Lifting hooks for lifting appliances; Ramshorn hooks; Unmaschined parts |
| DIN 15402-2 | 起重機用吊鉤.（Ramshorn hooks）雙鉤.帶螺紋軸的成品 | Lifting hooks for lifting appliances; Ramshorn hooks; Finished parts with threaded shank |
| DIN 15403 | 起重機的提升吊鉤.圓螺紋 | Lifting Hooks for Hoists; Knuckle Threads |
| DIN 15404-1 | 起重機吊鉤.鍛制吊鉤交貨技術條件 | Lifting hooks; technical delivery conditions for forged hooks |
| DIN 15404-2 | 起重機吊鉤.軋制吊鉤交貨技術條件 | Lifting hooks; technical delivery conditions for laminated hooks |
| DIN 15405-1 | 起重機用吊鉤.第1部分:使用中鍛制吊鉤的檢驗 | Lifting hooks; inspection of forged hooks in service |
| DIN 15405-2 | 起重機吊鉤.軋制吊鉤使用中檢查 | Lifting hooks; In-service inspection of laminated hooks |
| DIN 15406 | 起重吊鉤.手工鍛制吊鉤的描繪，指令 | Lifting hooks; tracing of hand forged hooks, directives |
| DIN 15407-1 | 起重機用吊鉤.第1部分:插口鐵水包、組件用帶測點的疊層吊鉤.主要尺寸 | Lifting hooks; laminated hooks with a point for spigot ladles, assembly, principal dimensions |
| DIN 15408 | 起重機.雙滑輪下滑車.組件 | Cranes; twin sheave bottom blocks; assembly |
| DIN 15409 | 起重機.四滑輪下滑車.組件 | Cranes; quadruple sheave bottom blocks; assembly |
| DIN 15412-1 | 起重機的底座.第1部分:橫梁毛坯 | Bottom blocks for lifting appliances; cross pieces; unmachined parts |
| DIN 15412-2 | 起重機的底座.第2部分:橫梁成品 | Bottom blocks for lifting appliances; cross pieces; finished parts |
| DIN 15413 | 起重機的下滑車.提升吊鉤螺母 | Bottom blocks for lifting appliances; lifting hook nuts |
| DIN 15417 | 起重機.下滑車.帶滑動軸承的D型繩索輪 | Cranes; bottom blocks; type D rope pulleys with plain bearings |
| DIN 15418-1 | 起重機.下滑車.無內套帶深槽滾珠軸承的C型繩輪 | Cranes; bottom blocks; type C rope pulleys with deep groove ball bearing, without internal sleeve |
| DIN 15418-2 | 起重機的下滑車.無內軸套深滾道滾珠軸承的C型繩索滑輪的間隔套 | Cranes; bottom blocks; spacer sleeves for type C rope pulleys with deep groove ball bearing, without internal sleeve |
| DIN 15418-3 | 起重機的下滑車.無內軸套深滾道滾珠軸承的C型繩索滑輪的油封蓋 | Cranes; bottom blocks; sealing covers for type C rope pulleys with deep groove ball bearing, without internal sleeve |
| DIN 15421-1 | 起重機的下滑車.帶深滾道滾珠軸承和內軸套的B型繩索滑輪 | Cranes; bottom blocks; type B rope pulleys with deep groove ball bearing and internal sleeve |
| DIN 15421-2 | 起重機.下滑車.帶深滾道滾珠軸承和內套筒的B型繩索輪的內軸套和隔離套 | Cranes; bottom blocks; internal sleeves and spacer sleeves for type B rope pulleys with deep groove ball bearing and internal sleeve |
| DIN 15421-3 | 起重機.下滑車.帶深滾道滾珠軸承和內套筒的B型繩索輪的油封蓋 | Cranes; bottom blocks; sealing covers for type B rope pulleys with deep groove ball bearing and internal sleeve |
| DIN 15422-1 | 起重機.下滑車.帶圓柱形滾動軸承和內套筒的A型繩索輪 | Cranes; bottom blocks; type A rope pulleys with cylindrical rolling bearing and internal sleeve |
| DIN 15422-2 | 起重機.下滑車.帶圓柱形滾動軸承和內套筒的A型繩索輪的內軸套和隔離套 | Cranes; bottom blocks; internal sleeves and spacer sleeves for type A rope pulleys with cylindrical rolling bearing and internal sleeve |
| DIN 15422-3 | 起重機.下滑車.帶圓柱形滾動軸承和內套筒的A型繩索輪的油封蓋 | Cranes; bottom blocks; sealing covers for type A rope pulleys with cylindrical rolling bearing and internal sleeve |
| DIN 15450 | 起重機.移動驅動用萬向軸的評價 | Cranes; evaluating of cardan shafts for travelling drives |
| DIN 15451-1 | 起重機.萬向節軸.第1部分:主要尺寸 | Cranes; cardan shafts, principle dimensions |
| DIN 15451-2 | 起重機.萬向節軸.第2部分:法蘭連接 | Cranes; cardan shafts, connection to coupling flange |
| DIN 15452 | 起重機.萬向軸的連接法蘭 | Cranes; coupling flanges for cardan shafts |
| DIN 15453 | 起重機.萬向節軸、安裝方向、維護、搬運和存放 | Cranes; cardan shafts, directives for installation, maintainance, handling and storage |
| DIN 22400 | 提升機的控制裝置.采礦用起重機和絞車 | Control units of winding engines; hoists and winches for mining |
| DIN 4132 Bb.1 | 起重機走道.鋼結構.計算、設計與制造原則.說明 | Craneways; Steel structures, Principles for calculation, design and construction, Explanations |
| DIN 4132 | 起重機走道.鋼結構.計算、設計與制造原則 | Craneways; Steel structures; Principles for calculation, design and construction |
| DIN 4212 | 加筋混凝土和預應力混凝土起重機軌道.設計和施工 | Reinforced concrete and prestressed concrete craneways; design and construction |
| DIN 45635-61 | 機器噪音測量.氣載噪聲測量.包面法.起重機 | Measurement of airborne noise emitted by machines; enveloping surface method; cranes |
| DIN 536-1 | 起重機軌道.A型、尺寸、截面特點、帶底腳緣的起重機軌道用鋼的品種 | Craine rails; dimensions, sectional properties, steel grades for crane rails with foot flange, form A |
| DIN 536-2 | F 型(扁形)起重機軌道.第2部分:尺寸、靜態值、鋼品級 | Crane Rails, Type F (Flat); Dimensions, Static Values, Steel Grades |
| DIN CEN/TS 13001-3-1 Berichtigung 1 | 起重機.一般設計.第3-1部分:鋼結構性能的極限狀態和合格檢驗 | Cranes - General design - Part 3-1: Limit states and proof of competence of steel structures; German version CEN/TS 13001-3-1:2004, Corrigenda to DIN CEN/TS 13001-3-1:2005-03; German version CEN/TS 13001-3-1:2004/AC:2006 |
| DIN CEN/TS 13001-3-1 | 起重機.一般設計.第3-1部分:鋼結構性能的極限狀態和檢驗 | Cranes - General design - Part 3-1: Limit states and proof of competence of steel structures; German version CEN/TS 13001-3-1:2004 |
| DIN CEN/TS 13001-3-2 Berichtigung 1 | 起重機.一般設計.第3-2部分:滑輪組中鋼索性能的極限狀態和檢驗 | Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems; German version CEN/TS 13001-3-2:2004, Corrigenda to DIN CEN/TS 13001-3-2:2005-03; German version EN 13001-3-2:2004/AC:2006 |
| DIN CEN/TS 13001-3-2 | 起重機.一般設計.第3-2部分:滑輪組中鋼索性能的極限狀態和檢驗 | Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems; German version CEN/TS 13001-3-2:2004 |
| DIN EN 12077-2 | 起重機安全.健康和安全要求.第2部分:限制和指示裝置 | Cranes safety - Requirements for health and safety - Part 2: Limiting and indicating devices; German version EN 12077-2:1998 |
| DIN EN 1255 | 內河航運船只.旋臂起重機 | Inland navigation vessels - Swing derricks; German version EN 1255:1995 |
| DIN EN 12644-1 | 起重機.使用和試驗資料.第1部分:說明書 | Cranes - Information for use and testing - Part 1: Instructions; German version EN 12644-1:2001 |
| DIN EN 12644-2 | 起重機.使用和試驗信息.第2部分:標記 | Cranes - Informations for use and testing - Part 2: Marking; German version EN 12644-2:2000 |
| DIN EN 12999 | 起重機.裝載起重機 | Cranes - Loader cranes; German version EN 12999:2002 |
| DIN EN 12999/A1 | 起重機.負載起重機 | Cranes - Loader cranes; German version EN 12999:2002/A1:2004 |
| DIN EN 12999/A2 | 起重機.裝載起重機 | Cranes - Loader cranes; German version EN 12999:2002/A2:2006 |
| DIN EN 13000 | 起重機.移動式起重機 | Cranes - Mobile cranes; German version EN 13000:2004 |
| DIN EN 13001-1 Berichtigung 1 | 起重機.一般設計.第1部分:一般原則和要求 | Cranes - General design - Part 1: General principles and requirements; German version EN 13001-1:2004, Corrigenda to DIN EN 13001-1:2005-04; German version EN 13001-1:2004/AC:2006 |
| DIN EN 13001-1 | 起重機.一般設計.第1部分:總則和要求 | Cranes - General design - Part 1: General principles and requirements; German version EN 13001-1:2004 |
| DIN EN 13001-2 | 起重機.一般設計.第2部分:負載作用 | Cranes - General design - Part 2: Load actions; German version EN 13001-2:2004+AC:2006+A1:2006 |
| DIN EN 13135-1 | 起重機.安全.設計.設備要求.第1部分:電工設備 | Cranes - Safety - Design - Requirements for equipment - Part 1: Electrotechnical equipment; German version EN 13135-1:2003 |
| DIN EN 13135-2 Berichtigung 1 | 起重機.設備.第2部分:非電氣化學設備 | Cranes - Equipment - Part 2: Non-elektrotechnical equipment; German version EN 13135-2:2004, Corrigenda to DIN EN 13135-2:2005-02; German version EN 13135-2:2004/AC:2005 |
| DIN EN 13135-2 | 起重機.設備.第2部分:非電工設備 | Cranes - Equipment - Part 2: Non-electrotechnical equipment; German version EN 13135-2:2004 |
| DIN EN 13155 | 起重機.非固定式荷載提升附屬裝置 | Cranes - Non fixed load lifting attachments; German version EN 13155:2003+A1:2005 |
| DIN EN 13157 | 起重機.安全.手動提升設備 | Cranes - Safety - Hand powered lifting equipment; German version EN 13157:2004 |
| DIN EN 13557 | 起重機.控制器和控制站 | Cranes - Controls and control stations; German version EN 13557:2003+A1:2005 |
| DIN EN 13586 Berichtigung 1 | 起重機.入口 | Cranes - Access; German version EN 13586:2004; Corrigenda to DIN EN 13586:2004-07; German version EN 13586:2004/AC:2007 |
| DIN EN 13586 | 起重機.檢修孔 | Cranes - Access; German version EN 13586:2004 |
| DIN EN 13852-1 Berichtigung 2 | 起重機.海上起重機.第1部分:通用海上起重機.DIN EN 13852-1-2004技術勘誤 | Cranes - Offshore cranes - Part 1: General-purpose offshore cranes; German version EN 13852-1:2004, Corrigendum to DIN EN 13852-1:2004-10; German version EN 13852-1:2004/AC:2007 |
| DIN EN 13852-1 | 起重機.海上起重機.第1部分:通用海上起重機 | Cranes - Offshore cranes - Part 1: General-purpose offshore cranes; German version EN 13852-1:2004 |
| DIN EN 13852-2 | 起重機.海上起重機.第2部分:浮動式起重機 | Cranes - Offshore cranes - Part 2: Floating cranes; German version EN 13852-2:2004 |
| DIN EN 14238 | 起重機.手控加載操作設備 | Cranes - Manually controlled load manipulating devices; German version EN 14238:2004 |
| DIN EN 14439 | 起重機.安全.塔式起重機 | Cranes - Safety - Tower cranes; English version of DIN EN 14439:2007-03 |
| DIN EN 14492-1 | 起重機.電力驅動絞車和提升設備.第1部分:電力驅動絞車 | Cranes - Power driven winches and hoists - Part 1: Power driven winches; English version of DIN EN 14492-1:2007-02 |
| DIN EN 14492-2 | 起重機.電動鏈式提升機.第2部分:電動吊車 | Cranes - Power driven winches and hoists - Part 2: Power driven hoists; English version of DIN EN 14492-2:2007-04 |
| DIN EN 14502-1 | 起重機.載人用升降設備.第1部分:吊藍 | Cranes - Equipment for lifting persons - Part 1: Suspended baskets (includes Corrigendum AC:2005) English version of DIN EN 14502-1:2006-05 |
| DIN EN 14502-2 | 起重機.載人用提升設備.第2部分:升降控制臺 | Cranes - Equipment for the lifting of persons - Part 2: Elevating control stations; German version EN 14502-2:2005 |
| DIN EN 1494 | 可移動的起重機和相關提升設備 | Mobile or movable jacks and associated lifting equipment; German version EN 1494:2000 |
| DIN EN 14985 | 起重機.回轉式動臂起重機 | Cranes - Slewing jib cranes; German version EN 14985:2007 |
| DIN EN 1991-3 | 歐洲法規1:結構作用.第3部分:起重機和機械感應作用 | Eurocode 1: Actions on structures - Part 3: Actions induced by cranes and machinery; English version of DIN EN 1991-3:2007-03 |
| DIN EN 1993-6 | 歐洲法規3:鋼結構的設計.第6部分:起重機支撐結構 | Eurocode 3: Design of steel structures - Part 6: Crane supporting structures; German version EN 1993-6:2007 |
| DIN EN 45510-6-8 | 發電廠設備采購指南.第6-8部分:渦輪機輔助設備和起重機 | Guide for procurement of power station equipment - Part 6-8: Turbine auxiliaries; cranes; German version EN 45510-6-8:1999 |
| DIN EN 60204-32 | 機械的安全性.機器的電氣設備.第32部分:起重機械的要求 | Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines (IEC 60204-32:1998); German version EN 60204-32:1998 |
| DIN EN 818-1 | 起重用短鏈鎖.安全性.第1部分:一般驗收條件 | Short link chain for lifting purposes - Safety - Part 1: General conditions of acceptance; German version EN 818-1:1996 |
| DIN EN 818-2 | 起重用短環圓鋼鏈條.安全性.第2部分:8級止檔鏈中級公差圓鋼鏈條 | Short link chain for lifting purposes - Safety - Part 2: Medium tolerance chain for chain slings, grade 8; German version EN 818-2:1996 |
| DIN EN 818-3 | 起重用短環節鏈.安全性.第3部分:鏈式吊索用的中級公差的圓鋼鏈.質量等級4 | Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain slings; grade 4; German version EN 818-3:1999 |
| DIN EN 818-4 | 起重用短環圓鋼鏈條.安全性.第4部分:8級止檔鏈 | Short link chain for lifting purposes - Safety - Part 4: Chain slings, grade 8; German version EN 818-4:1996 |
| DIN EN 818-5 | 起重用短環節鏈.安全性.第5部分:鏈式吊瑣索.質量等級4 | Short link chain for lifting purposes - Safety - Part 5: Chain slings; grade 4; German version EN 818-5:1999 |
| DIN EN 818-6 | 起重用短環節鏈.安全性.第6部分:鏈式吊索.生產商提供的用于使用和維修的信息規范 | Short link chain for lifting purposes - Safety - Part 6: Chain slings; specification for information for use and maintenance to be provided by the manufacturer; German version EN 818-6:2000 |
| DIN EN ISO 13535 | 石油工業和天然氣工業.鉆井和生產設備.起重機設備 (ISO 13535:2000); 德文版本 EN ISO 13535:2000 (德文和 | Petroleum and natural gas industries - Drilling and production equipment - Hoisting equipment (ISO 13535:2000); German version EN ISO 13535:2000 (German and English texts) |
| DIN ISO 6045 | 造船和海上結構.懸臂起重機鵝頸形起重桿的軸承.組件和部件 | Shipbuilding and marine structures; bearings for derrick goosenecks; assemblies and components; identical with ISO 6045, edition 1987 |
| DIN-Fachbericht 126 | 國家應用文獻(NAD).DIN V ENV 1993-6的應用準則.歐洲法規3:第6部分:起重機軌道 | () |
| 編號 | 中文名稱 | 英文名稱 |