微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| DIN 1052 | 木結構的設計.總則和建筑物用規則 | Design of timber structures - General rules and rules for buildings |
| DIN 1054 | 建筑地基.土方工程和地基的安全驗收 | Ground - Verification of the safety of earthworks and foundations |
| DIN 1055-1 | 對結構施加的作用力.第1部分:建筑材料、結構部件和貯存物料的密度和重量 | Action on structures - Part 1: Densities and weights of building materials, structural elements and stored materials |
| DIN 1055-2 | 建筑物的設計負荷.土壤特性值.比重、磨擦角、粘著力、墻壁摩擦角 | Design Loads for Buildings; Soil Characteristics; Specific Weight, Angle of Friction, Cohesion, Angle of Wall Friction |
| DIN 1055-3 | 對結構的作用.第3部分:建筑物的自重和施加載荷 | Action on structures - Part 3: Self-weight and imposed load in building |
| DIN 1055-6 Berichtigung 1 | 對結構物的作用.第6部分:建筑物的設計載荷和筒倉載荷.DIN 1005-6-2005的勘誤 | Actions on structures - Part 6: Design loads for buildings and loads in silo bins, Corrigenda to DIN 1005-6:2005-03 |
| DIN 1055-6 | 對結構物的作用.第6部分:建筑物的設計載荷和筒倉載荷 | Actions on structures - Part 6: Design loads for buildings and loads in silo bins |
| DIN 1055-7 | 對建筑物的作用.第7部分:熱作用 | Actions on structures - Part 7: Thermal actions |
| DIN 1057-1 | 獨立式煙囪用建筑材料.弧形磚.要求、檢驗、檢查 | Building materials for free-standing chimneys; compass bricks; requirements, testing, inspection |
| DIN 107 | 樓房建筑.左和右邊的標識 | Building construction; identification of right and left side |
| DIN 1080-4 | 土木建筑工程用術語、符號和單位.混凝土結構、復合鋼結構和混凝土中的鋼大梁 | Terms, Symbols and Units Used in Civil Engineering; Concrete Construction, Composite Steel Construction and Steel Girders in Concrete |
| DIN 1239 | 井筒、噴水池和其它供水建筑蓋扳.結構原理 | Coverings for wells, spring water chambers and other water supply construction - Principles for construction |
| DIN 1249-11 | 建筑用玻璃.玻璃邊緣.第11部分:邊緣類別和精加工概念與特性 | Glass in building; glass edges; concept, characteristics of edge types and finishes |
| DIN 1356-1 | 建筑物和土木工程圖紙.第1部分:類型、內容和表示法的一般規則 | Building and civil engineering drawings - Part 1: Types, content and general rules for representation |
| DIN 1356-6 | 技術產品文件.建筑和土木工程制圖.第6部分:建筑和施工場地文件 | Technical product documentation - Building and civil engineering drawings - Part 6: Documentation of buildings and construction sites |
| DIN 14034-6 | 消防用圖形符號.第6部分:建筑內部設備 | Graphical symbols for fire-brigade - Part 6: Equipments in buildings |
| DIN 14095 | 消防隊用建筑物構件平面圖 | Ground plans for components for buildings for fire brigade use |
| DIN 15306 | 電梯.住宅建筑物用載人電梯.功能尺寸 | Lifts - Passenger lifts in residential buildings - Functional dimensions |
| DIN 15309 | 升降機.非住宅建筑物用載人電梯和床式升降機.功能尺寸 | Lifts - Passenger lifts in non-residential buildings and bed lifts - Functional dimensions |
| DIN 15460 | 建筑材料用的負荷箱.安全要求 | Load box for building materials; safety requirements |
| DIN 15920-4 | 舞臺和攝影棚建筑設施.平臺種類.可任意移動的舞臺車 | Stage and studio set up; practicals, boat-trucks |
| DIN 18000 | 建筑物模數協調 | Modular coordination in building |
| DIN 18012 | 建筑物中的家用連接設施.空間要求和設計原則 | House service connection facilities in buildings - Space requirements, principles for planning |
| DIN 18015-1 | 民用建筑物的電氣裝置.第1部分:規劃原則 | Electrical installations in residential buildings - Part 1: Planning principles |
| DIN 18015-2 | 住宅建筑用電氣設備.第2部分:最小設備的種類和范圍 | Electrical installations in residential buildings - Part 2: Nature and extent of minimum equipment |
| DIN 18015-3 | 民用建筑物的電氣裝置.第3部分:電氣設備的布線和配置 | Electrical installations in residential buildings - Part 3: Wiring and disposition of electrical equipment |
| DIN 18073 | 樓房建筑的滾動百葉窗和遮蔽設備.概念和要求 | Roller shutters, solar shading and black-out equipment in building construction; concepts and requirements |
| DIN 18101 | 門.住宅建筑的門.門板尺寸.折頁和鎖的位置.尺寸的相關性 | Doors; doors for residential buildings; sizes of door leaves, position of hinges and lock, interdependence of dimensions |
| DIN 18111-1 | 門框.鋼門框.第1部分:磚石建筑中折式門的標準門框 | Door frames - Steel door frames - Part 1: Standard door frames for rebated doors in masonry |
| DIN 18122-1 | 建筑地基.勘探和試驗.狀態極限(濃度極限).第1部分:液流極限和塑性極限測定 | Soil, investigation and testing - Consistency limits - Part 1: Determination of liquid limit and plastic limit |
| DIN 18123 | 建筑地基.勘探和試驗.粒度分布的測定 | Soil, investigation and testing - Determination of grain-size distribution |
| DIN 18124 | 建筑地基.勘探和試驗.顆粒密度測定.毛細管比重計.寬口比重計 | Soil, investigation and testing - Determination of density of solid particles - Capillary pyknometer, wide mouth pycnometer |
| DIN 18126 | 建筑地基.勘探和試驗.最疏松和最致密巖層非粘結性土壤密度測定 | Soil, investigation and testing - Determination of density of non-cohesive soils for maximum and minimum compactness |
| DIN 18129 | 建筑地基.勘探和試驗.石灰含量測定 | Soil, investigation and testing - Determination of lime content |
| DIN 18147-2 | 三層煙囪用建筑材料和建筑部件.外層用的輕質混凝土元件.要求及檢驗 | Building material and building elements for three-layered chimneys; elements of light-weight concrete for the outer layer; requirements and tests |
| DIN 18150-1 | 煙囪建造用建筑材料和構件.第1部分:輕型混凝土煙道、同質煙囪、要求 | Building materials and components for building chimneys; lightweight concrete flues, homogenous chimneys, requirements |
| DIN 18150-2 | 一層煙囪用建筑材料和部件.輕質混凝土制煙道.檢驗和監督 | Building material and elements for one-layered chimneys; lightweight concrete flues; examination and supervision |
| DIN 18159-1 | 建筑工作現場發泡塑料用泡沫塑料.絕熱用現場聚氨酯泡沫塑料.應用、性能、實施、檢驗 | Cellular plastics as in-situ cellular plastics in building; in-situ polyurethane (PUR) foam for thermal insulation; application, properties, execution, testing |
| DIN 18159-2 | 建筑中現場發泡用泡沫塑料.絕熱用脲-甲醛樹脂現場發泡的泡沫塑料.應用、性能、制作、檢驗 | Cellular Plastics as in-situ Foam in Building; In-situ Foam Produced from Urea-formaldehyde (UF) Resin for Thermal Insulation; Application, Properties, Execution, Testing |
| DIN 18181 | 樓房建筑用石膏灰泥板.應用 | Gypsum plasterboards for building construction - Application |
| DIN 18195 Bb.1 | 建筑物防水.密封劑定位控制一致性的例子 | Water-proofing of buildings - Examples of positioning of sealants in accordance |
| DIN 18195-1 | 建筑物的防水層.第1部分:原理、定義及防水層類型的屬性 | Water-proofing of buildings - Part 1: Principles, definitions, attribution of waterproofing types |
| DIN 18195-10 | 建筑物的防水性.第10部分:防護層和防護措施 | Water-proofing of buildings - Part 10: Protective layers and protective measures |
| DIN 18195-2 | 建筑物的防水層.第2部分:材料 | Water-proofing of buildings - Part 2: Materials |
| DIN 18195-3 | 建筑物的防水層.第3部分:地面的要求和材料的工作特性 | Water-proofing of buildings - Part 3: Requirements to the ground and working properties of materials |
| DIN 18195-4 | 建筑物的防水層.第4部分:防地面潮氣(毛細水、存留水)和地板下及墻上非累積滲漏水的防水層的設計和施工 | Water-proofing of buildings - Part 4: Water-proofing against ground moisture (capillary water, retained water) and non-accumulating seepage water under floor slabs and on walls, design and execution |
| DIN 18195-5 | 建筑物的防水.第5部分:對地板和潮濕區域非壓力水的防水層.設計與施工 | Water-proofing of buildings - Part 5: Water-proofing against non-pressing water on floors and in wet areas; design and execution |
| DIN 18195-6 | 建筑物的防水層.第6部分:防外擠壓水和累積滲漏水的防水層.設計與施工 | Water-proofing of buildings - Part 6: Water-proofing against outside pressing water and accumulating seepage water; design and execution |
| DIN 18195-7 | 建筑物和構件的防水.防止護墻板因水壓原因漏水.第7部分:設計與工藝 | Waterproofing of buildings and structures; waterproofing sheeting subjected to hydrostatic pressure from the inside; design and workmanship |
| DIN 18195-8 | 建筑物的防水性.第8部分:活動連接接頭的防水性 | Water-proofing of buildings - Part 8: Water-proofing over joints for movements |
| DIN 18195-9 | 建筑物的防水性.第9部分:滲透、轉換、連接和端接 | Water-proofing of buildings - Part 9: Penetrations, transitions, connections and endings |
| DIN 18200 | 建筑產品的一致性評估.認證機構對建筑產品的認證 | Assessment of conformity for construction products - Certification of construction products by certification body |
| DIN 18202 | 建筑施工公差.建筑物 | Tolerances in building construction - Structures |
| DIN 18203-1 | 建筑施工尺寸公差.混凝土預制件.鋼筋混凝土預制件和預應力混凝土制件 | Tolerances in building construction - Part 1: Prefabricated components made of concrete, reinforced concrete and prestressed concrete |
| DIN 18203-2 | 建筑施工公差.第2部分:預制鋼部件 | Tolerances in building - Part 2: Prefabricated steel components |
| DIN 18203-3 | 建筑物的容差.木質板材制品的建筑物部件 | Tolerances for building; building components of timber and wood based panel products |
| DIN 18204-1 | 用紡織物和塑料薄膜(篷帳布)制造的建筑物和帳篷罩部件.第1部分:涂聚氯乙烯(PVC)的聚酯基底纖維 | Components for enclosures made of textile fabrics and plastic films (awnings) for structures and tents - Part 1: PVC coated polyester base fabric |
| DIN 18205 | 建筑設計簡介 | Brief for building design |
| DIN 18215 | 混凝土與鋼筋混凝土建筑物用木制模板.標準尺寸0.5m×1.5m厚21mm | Timer form boards for concrete and reinforced concrete structures; standard dimension 0,50 m × 1,50 m; thickness = 21 mm |
| DIN 18225 Bb.1 | 工業建筑.工業建筑中的交通道路.規定 | Industrial construction; traffic ways in industrial buildings; regulations |
| DIN 18225 | 工業建筑.工業建筑中的交通道路 | Industrial construction; traffic ways in industrial buildings |
| DIN 18230-1 | 工業建筑中的結構防火.第1部分:分析要求的耐火時間 | Structural fire protection in industrial buildings - Part 1: Analytically required fire resistance time |
| DIN 18230-2 | 工業建筑中結構防火.第2部分:倉庫庫存材料燃燒性能的測定.燒損系數m值 | Structural fire protection in industrial buildings - Part 2: Determination of combustion behaviour of materials in storage arrangement - Combustion factor m |
| DIN 18230-3 | 工業建筑中結構防火.第3部分:計算值 | Structural fire protection in industrial buildings - Part 3: Values for calculation |
| DIN 18234-1 | 建筑物大型屋頂?shù)姆阑鸢踩?從下部起火.第1部分:定義、要求和試驗.封閉式屋頂區 | Fire safety of large roofs for buildings - Fire exposure from below - Part 1: Definitions, requirements and tests; Roof areas without openings |
| DIN 18234-2 | 防止從下部起火的建筑物用大型屋頂?shù)姆阑鸢踩?第2部分:符合DIN18234-1要求的屋頂列表.無天窗的屋頂面積 | Fire safety of large roofs for buildings - Fire exposure from below - Part 2: List of roofs, which fulfil the requirements of DIN 18234-1; Roof areas without openings |
| DIN 18234-3 | 建筑物大型屋頂?shù)姆阑鸢踩?下部著火.第3部分:定義、要求及屋頂滲透和屋緣的試驗 | Fire safety of large roofs for buildings - Fire exposure from below - Part 3: Definitions, requirements and tests at roof penetrations and roof edges |
| DIN 18234-4 | 建筑物大型屋頂?shù)姆阑鸢踩?從下部著火.第4部分:符合DIN 18234-3要求的屋頂滲透和屋頂緣的鑲邊 | Fire safety of large roofs for buildings - Fire exposure from below - Part 4: List of roof penetrations and roof edges, which fulfil the requirements of DIN 18234-3 |
| DIN 18255 | 建筑用五金件.門把手、背面板和門框.定義、尺寸、要求和作標記 | Building hardware - Door lever handles, backplates and escutcheons - Definitions, dimensions, requirements and marking |
| DIN 18257 | 建筑用小五金.安全門板.定義、測量、要求和標記 | Building hardware - Security plates - Definitions, measurements, requirements, marking |
| DIN 18263-1 | 建筑五金.受控門鎖.第1部分:用曲軸傳動和螺旋彈簧的門鎖 | Building hardware - Controlled door closing devices with hydraulic damping - Part 1: Surface(top) mounted door closer with crank drive and spiral spring (pot-type door closer) |
| DIN 18263-4 | 建筑五金.受控門鎖.第4部分:帶自動旋轉葉片驅動的門鎖 | Building hardware - Controlled door closing devices - Part 4: Automatic swing-door operator |
| DIN 18264 | 建筑五金.單動門用彈簧門樞 | Building hardware; spring hinges for doors, single action |
| DIN 18265 | 建筑五金.雙動門用彈簧門樞 | Building hardware; spring hinges for doors, double action |
| DIN 18268 | 建筑五金件.門折頁.折頁基準線 | Building hardware; hinges for doors; reference-lines for hinges |
| DIN 18273 | 建筑五金件.防火門和防煙門把手組件.術語定義、尺寸、要求和試驗 | Building hardware - Lever handle units for fire doors and smoke control doors - Concepts and definitions, dimensions, requirements and testing |
| DIN 18299 | 建筑合同程序(VOB).第C部分:建筑合同通用技術規范(ATV).各種類型建筑工作總則 | Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - General rules applying to all types of construction works |
| DIN 18300 | 建筑合同程序(VOB).第C部分:建筑合同通用技術規范(ATV).土方工程 | Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Earthworks |
| DIN 18301 | 建筑合同程序(VOB).第C部分:建筑合同通用技術規范(ATV).鉆孔作業 | Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Drilling work |
| DIN 18302 | 建筑合同程序(VOB).第C部分: 建筑合同通用技術規范(ATV).地上鑿洞沉降作業 | Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Borehole sinking operations |
| DIN 18303 | 建筑工程合同.第C部分:建筑工程通用技術規范.鋪設工程 | Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV); Timbering to trenchwork |
| DIN 18304 | 建筑工程承包條例.第C部分:建筑工程通用技術規范.打樁工程 | Contract procedures for building works - Part C: General technical specifications in building works; Pile driving |
| DIN 18305 | 建筑工程承包條例.第C部分:建筑工程通用技術規范.預排水工程 | Contract procedures for building works - Part C: General technical specifications for building works (ATV); Predraining works |
| DIN 18306 | 建筑工程承包條例.第C部分:建筑工程通用技術規范.污水工程 | Contract procedures for building works - Part C: General technical specifications for building works; Sewage channel works |
| DIN 18307 | 建筑合同程序(VOB).第C部分:建筑合同通用技術規范(ATV).建筑物外壓力管道工程管敷設 | Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Laying of pressure pipework outside buildings |
| DIN 18308 | 建筑工程合同.第C部分:建筑工程通用技術規范.排水工程 | Contract procedures for building works - Part C: General technical specifications for building works; Drainage work |
| DIN 18309 | 建筑工程合同.第C部分:建筑工程通用技術規范.灌漿工程 | Contract procedures for buildings works - Part C: General technical specifications for building works; Grouting works |
| DIN 18310 | 建筑工程合同.第C部分:建筑工程通用技術規范.河流、堤壩和海岸沙灘安全防御工程 | Contracts procedures for buildings works - Part C: General technical specifications for building works; Security works at water, dikes and costal dunes |
| DIN 18311 | 建筑合同程序(VOB).第C部分:建筑合同通用技術規范(ATV).挖泥工程 | Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Dredging work |
| DIN 18312 | 建筑工程合同.第C部分:建筑工程通用技術規范.地下建筑工程 | Contract procedures for building works - Part C: General technical specifications for building works; Underground construction work |
| DIN 18313 | 建筑工程合同.第C部分:建筑工程通用技術規范.帶支撐液隔墻工程 | Contract procedures for building works - Part C: General technical specifications for building works; Works for diaphragm walls with supporting liquids |
| DIN 18314 | 建筑合同程序(VOB).第C部分:建筑合同通用技術規范(ATV).噴注混凝土工程 | Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Sprayed concrete work |
| DIN 18315 | 建筑合同程序(VOB).第C部分:建筑合同通用技術規范(ATV).道路建設.無膠凝材料路面 | Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Road construction - Surfacings without binders |
| DIN 18316 | 建筑合同程序(VOB).第C部分:建筑合同通用技術規范(ATV).道路建設.水硬性膠凝材料路面層 | Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Road construction - Surfacings with hydraulic binders |
| DIN 18317 | 建筑合同程序(VOB).第C部分:建筑合同通用技術規范(ATV).道路建設.瀝青路面 | Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Road construction - Asphalt surfacings |
| DIN 18318 | 建筑合同程序(VOB).第C部分:建筑合同通用技術規范(ATV).道路建設.接頭易斷裂的方塊鋪石和混凝土路面及環境 | Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Road construction - Dry-jointed sett and slab pavements, and surrounds |
| DIN 18319 | 建筑工程承包條例.第C部分:建筑工程通用技術規范.管道掘進工程 | Contract procedures for building works - Part C: General technical specifications for building works; Pipe drilling works |
| DIN 18320 | 建筑合同程序(VOB).第C部分:建筑合同通用技術規范(ATV).園林設計工程 | Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Landscape work |
| DIN 18322 | 建筑合同程序(VOB).第C部分:建筑合同通用技術規范(ATV).地下電纜敷設工作 | Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Underground cable laying work |
| DIN 18325 | 建筑工程合同.第C部分:建筑工程通用技術規范.鐵路工程 | Contract procedures for building works - Part C: General technical specifications for building works; Railway track works |
| DIN 18330 | 建筑合同程序(VOB).第C部分:建筑合同通用技術規范(ATV).磚石砌筑建筑工程 | Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Masonry work |
| DIN 18331 | 建筑合同程序(VOB).第C部分:建筑合同通用技術規范(ATV).混凝土工程 | Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Concrete work |
| DIN 18332 | 建筑工程合同.第C部分:建筑工程通用技術規范.毛石作業 | Contract procedures for building works - Part C: General technical specifications for building works; Ashlar works |
| DIN 18333 | 建筑工程承包條例.第C部分:建筑工程通用技術規范.鑄石工程 | Contract procedures for building works - Part C: General technical specifications for building works; Cast stone works |
| DIN 18334 | 建筑合同程序(VOB).第C部分:建筑合同通用技術規范(ATV).木工 | Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Carpentry |
| DIN 18335 | 建筑工程合同.第C部分:建筑工程通用技術規范.鋼結構建筑工程 | Contract procedures for building works - Part C: General technical specifications for building works; Steel construction works |
| DIN 18336 | 建筑工程合同.第C部分:建筑工程通用技術規范.防水工程 | Contract procedures for building works - Part C: General technical specifications for building works; Water-proofing works |
| DIN 18338 | 建筑合同程序(VOB).第C部分:建筑合同通用技術規范(ATV).屋頂鋪設工程 | Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Roofing work |
| DIN 18339 | 建筑工程合同.第C部分:建筑工程通用技術規范.冷作工 | Contract procedures for building works - Part C: General technical specifications for building works; Sheet metal works |
| DIN 18340 | 建筑合同程序(VOB).第C部分:建筑合同通用技術規范(ATV). 干襯墊和隔斷作業 | Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Dry lining and partitioning work |
| DIN 18345 | 建筑合同程序(VOB).第C部分:建筑合同通用技術規范(ATV).外部熱絕緣復合系統作業 | Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Work on external thermal insulation composite systems |
| DIN 18349 | 建筑合同程序(VOB).第C部分:建筑合同通用技術規范(ATV).混凝土結構養護工程 | Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Repair work on concrete structures |
| DIN 18350 | 建筑合同程序(VOB).第C部分:建筑合同通用技術規范(ATV).抹灰和打底 | Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Plastering and rendering |
| DIN 18351 | 建筑合同程序(VOB).第C部分:建筑合同通用技術規范(ATV).后面通風的幕墻工程 | Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Work on back-ventilated curtain walling |
| DIN 18352 | 建筑合同程序(VOB).第C部分:建筑合同通用技術規范(ATV).墻面磚和地面磚 | Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Wall and floor tiling |
| DIN 18353 | 建筑合同程序(VOB).第C部分:建筑合同通用技術規范(ATV).地板找平層敷設 | Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Laying of floor screed |
| DIN 18354 | 建筑合同程序(VOB).第C部分:建筑合同通用技術規范(ATV).敷瀝青作業 | Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Asphalt flooring work |
| DIN 18355 | 建筑合同程序(VOB).第C部分:建筑合同通用技術規范(ATV).細木工 | Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Joinery |
| DIN 18356 | 建筑合同程序(VOB).第C部分:建筑合同通用技術規范(ATV).鑲木地板 | Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Laying of parquet flooring |
| DIN 18357 | 建筑合同程序(VOB).第C部分:建筑合同通用技術規范(ATV).門窗配件安裝 | Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Mounting of door and window hardware |
| DIN 18358 | 建筑合同程序(VOB).第C部分:建筑合同通用技術規范(ATV).卷門和類似設備的安裝 | Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Installation of roller shutters and similar equipment |
| DIN 18360 | 建筑工程合同.第C部分:建筑工程通用技術規范.金屬結構工程 | Contract procedures for building works - Part C: General technical specifications for building works; Metal construction works |
| DIN 18361 | 建筑工程合同.第C部分:建筑工程通用技術規范.玻璃鑲裝工程 | Contract procedures for building works - Part C: General technical specifications for building works; Glazing works |
| DIN 18363 | 德國建筑合同程序.第C部分:建筑工程通用技術規范.噴漆.覆層工程 | Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Painting and coatings work |
| DIN 18364 | 德國建筑合同程序.第C部分:建筑工程通用技術規范.鋼和鋁結構的防護工程 | Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Corrosion protection of steel structures |
| DIN 18365 | 建筑合同程序(VOB).第C部分:建筑合同通用技術規范(ATV).地面鋪裝作業 | Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Flooring work |
| DIN 18366 | 建筑合同程序(VOB).第C部分:建筑合同通用技術規范(ATV).墻和天花板裝飾涂層的應用 | Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Application of decorative coverings on walls and ceilings |
| DIN 18367 | 建筑工程合同.第C部分:建筑工程通用技術規范.木塊鋪砌路面工程 | Contract procedures for building works - Part C: General technical specifications for building works; Wood blocks paving works |
| DIN 18379 | 德國建筑合同程序.第C部分:建筑工程通用技術規范.房間通風系統 | Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Installation of air conditioning systems |
| DIN 18380 | 建筑合同程序(VOB).第C部分:建筑合同通用技術規范(ATV).中央供熱系統和熱水供應系統裝置 | Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Installation of central heating systems and hot water supply systems |
| DIN 18381 | 建筑合同程序(VOB).第C部分:建筑合同通用技術規范(ATV).建筑物內氣、水和排水管道工程的安裝 | Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Installation of gas, water and drainage pipework inside buildings |
| DIN 18382 | 建筑工程合同.第C部分:建筑工程通用技術規范.標稱電壓不超過36kV的低壓設備和中壓設備 | Contract procedures for building works - Part C: General technical specifications for building works; Low-voltage installation and medium-voltage installation with nominal voltages up to including 36 kV |
| DIN 18384 | 建筑工程承包條例.第C部分:建筑工程通用技術規范.避雷設備 | Contract procedure for building works - Part C: General technical specifications for building works; Lightning protection systems |
| DIN 18385 | 建筑工程合同.第C部分:建筑工程通用技術規范.輸送設備、電梯、自動扶梯和自動人行道 | Contract procedures for building works - Part C: General technical specifications for building works - Conveying installations, lifts, escalators and moving walkways |
| DIN 18386 | 建筑合同程序(VOB).第C部分:建筑合同通用技術規范(ATV).建筑物自動化和控制系統 | Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Building automation and control systems |
| DIN 18421 | 建筑合同程序(VOB).第C部分:建筑合同通用技術規范(ATV).服務設施隔離 | Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Insulation of service installations |
| DIN 18451 | 德國建筑合同程序.第C部分:建筑工程通用技術規范.腳手架作業 | Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Scaffolding work |
| DIN 18459 | 建筑合同程序(VOB).第C部分:建筑合同通用技術規范(ATV).拆除和解構工作 | Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Demolition and dismantling work |
| DIN 18516-4 | 回火安全玻璃板制背部通風、非承重的建筑物外圍墻.要求和檢驗 | Back-ventilated, non-loadbearing, external enclosures of buildings, made from tempered safety glass panels; requirements and testing |
| DIN 18540 | 建筑物用填縫密封劑的外墻接合處密封 | Sealing of exterior wall joints in building using joint sealants |
| DIN 18560-1 | 房屋建筑中的地板找平層.第1部分:一般要求、檢驗和建筑 | Floor screeds in building construction - Part 1: General requirements, testing and construction |
| DIN 18560-2 | 房屋建筑中的地板找平層.第2部分:絕緣層上的地板找平層和保暖地板找平層 | Floor screeds in building construction - Part 2: Floor screeds and heating floor screeds on insulation layers |
| DIN 18560-3 | 房屋建筑中的地板刮板.第3部分:粘結地板刮板 | Floor screeds in building construction - Part 3: Bonded screed |
| DIN 18650-1 | 建筑五金.電動人行門.第1部分:產品要求和試驗方法 | Building hardware - Powered pedestrian doors - Part 1: Product requirements and test methods |
| DIN 18650-2 | 建筑五金.電動人行門.第2部分:電動人行門的安全性 | Building hardware - Powered pedestrian doors - Part 2: Safety at powered pedestrian doors |
| DIN 18799-1 | 建筑工程用爬梯.第1部分:帶兩根支柱的爬梯.安全性要求和試驗 | Ladders for construction works - Part 1: Ladders with two uprights; safety requirements and tests |
| DIN 18799-2 | 建筑工程用爬梯.第2部分:帶一根支柱的爬梯.安全性要求和試驗 | Ladders for construction works - Part 2: Ladders with one upright; safety requirements and tests |
| DIN 18799-3 | 建筑工程用爬梯.第3部分:煙囪用爬梯.安全性要求和試驗 | Ladders for construction works - Part 3: Ladders for chimneys; safety requirements and tests |
| DIN 18801 | 鋼結構建筑.設計和建造 | Structural steel in building; design and construction |
| DIN 18807-1/A1 | 建筑物用梯形板材.鋼梯形板材.一般要求、承載能力計算.修改件A1 | Trapezoidal sheeting in building - Trapezoidal steel sheeting - General requirements and determination of loadbearing capacity by calculation; Amendment A1 |
| DIN 18807-2/A1 | 建筑物用梯形板材.鋼梯形板材.進行強度試驗并評定.修改件A1 | Trapezoidal sheeting in building - Steel trapezoidal sheeting - Execution and evaluation of ultimate strenth tests; Amendment A1 |
| DIN 18807-3 | 建筑物中梯形護墻板.梯形鋼板.結構分析和設計 | Trapezoidal sheeting in building; trapezoidal steel sheeting; structural analysis and design |
| DIN 18807-3/A1 | 建筑物用梯形型材.鋼梯形型材.分析、結構和設計.修改件A1 | Trapezoidal sheeting in building - Steel trapezoidal sheeting - Analysis, structural and design; Amendment A1 |
| DIN 18807-7 | 建筑物用梯形板材.第7部分:鋁制梯形板材及其連接件.通過試驗對承載能力的測定 | Trapezoidal sheeting in buildings - Part 7: Aluminium trapezoidal sheeting and their connections; determination of load bearing capacity by test |
| DIN 18807-9 | 建筑物的梯形薄板.第9部分:鋁梯形型材及其連接件.使用和構造 | Trapezoidal sheeting in buildings - Part 9: Aluminium trapezoidal sheeting and their connections; application and construction |
| DIN 18808 | 鋼結構建筑物.以承受靜負荷為主的空心型材支撐結構 | Steel structures; structures made from hollow sections subjected to predominantly static loading |
| DIN 18902 | 馬廄建筑用上釉陶土構件.飼料槽、瓦、水槽、尺寸、要求和檢驗 | Vitrified clay elements for stable construction; mangers, tiles, troughs; sizes, requirements, testing |
| DIN 18918 | 風景設計中的植被技術.穩定土壤的生物方法.植草和種植穩定法.活的植物材料和無生命材料及建筑構件、組合施 | Vegetation technology in landscaping - Biological methods of site stabilization - Stabilization by seeding and planting, stabilization by means of living plant material, dead material and building elements, combined construction methods |
| DIN 18960 | 建筑的用戶成本 | User costs of buildings |
| DIN 1946-6 | 通風和空調.第6部分:居住建筑物的通風.要求、性能和驗收(VDI通風實施規程) | Ventilation and air conditioning - Part 6: Ventilation for residential buildings; requirements, performance, acceptance (VDI ventilation code of practice) |
| DIN 19531-10 | 建筑物污水和污物排放系統用未增塑聚氯乙烯(PVC-U)套管道和配件.第10部分:燃燒性能、質量控制和安裝的推薦 | Pipes and fittings made of unplasticized polyvinyl chloride (PVC-U) socket for waste and soil discharge systems inside buildings - Part 10: Fire behaviour, quality control and installation recommendations |
| DIN 19535-10 | 建筑物內耐熱水排污系統(HT)用高密度聚乙烯(PE-HD)管和管件.第10部分:防火性能、質量控制和安裝的推薦規范 | High-density polyethylene (PE-HD) pipes and fittings for hot-water resistant waste and soil discharge systems (HT) inside buildings - Part 10: Fire behaviour, quality control and installation recommendations |
| DIN 19538-10 | 建筑物內耐熱污水和污物排放系統用氯化的聚氯乙烯(PVC-C)管道和配件.第10部分:燃燒性能、質量控制和安裝的 | Pipes and fittings made of chlorinated polyvinyl chloride (PVC-C) for hot-water resistant waste and soil discharge systems inside buildings - Part 10: Fire behaviour, quality control and installation recommendations |
| DIN 19560-10 | 建筑物中耐熱的廢水和污物排放系統用聚丙烯(PP)管材和管接頭.第10部分:燃燒特性.質量控制和推薦標準 | Pipes and fittings made of polypropylene (PP) for hot water resistant waste and soil discharge systems inside buildings - Part-10: Fire behaviour, quality control and installation recommendations |
| DIN 19561-10 | 建筑物內部耐熱水的廢水和污物排放系統用苯乙烯共聚物制管和管件.第10部分:燃燒性能、質量控制和安裝的推薦 | Pipes and fittings made of styrene-copolymerisats for hot water resistant waste and soil discharge systems inside buildings - Part 10: Fire behaviour, quality control and installation recommendations |
| DIN 19569-7 | 污水處理廠.建筑結構和技術設備的設計原理.第7部分:人類污物接收站 | Sewage treatment plants - Principles for the design of structures and technical equipment - Part 7: Station for the transfer of faecal sewage |
| DIN 1960 | 建筑工程承包條例.第A部分:建筑工程合同條款總則 | Contract procedures for building works - Part A: General directions of contract letting for building works |
| DIN 1961 | 德國建筑合同程序.第B部分:有關建筑工程施工的一般合同條件 | Construction contract procedures(VOB) - Part B: General conditions of contract relating to the execution of construction works |
| DIN 19661-1 | 水工建筑結構.第1部分.交叉結構工程、涵洞工程和排水工程 | Hydraulic structures - Part 1: Crossing works, culvert works and drain works |
| DIN 22434-8 | 無煙煤礦井下照明.照明工藝設計原理.第8部分:建筑工地用 | Underground lighting in hardcoal mining - Lighting-technological planning bases - Part 8: For building sites |
| DIN 24100-1 | 建筑和建筑材料工業用機械.機械粉碎.第1部分:與材料加工相關的概念 | Machines for the building and building material industries; mechanical comminution; concepts relating to materials processing |
| DIN 24100-2 | 建筑和建筑材料工業用機械.機械粉碎.第2部分:術語、規格 | Machines for the building and building material industries; mechanical comminution; terms, sizes |
| DIN 24117 | 建筑設備和建筑材料機械.混凝土泵用配送桿.計算原則和穩定性 | Construction equipment and building material machinery - Distributing mast for concrete pumps - Principles of calculation and stability |
| DIN 24118 | 建筑設備和建筑材料機械.混凝土傳送管道.尺寸 | Construction equipment and building material machinery - Concrete delivery pipelines - Dimensions and calculations |
| DIN 25457-6 | 放射性廢料和核技術設備部件的釋放放射性強度測量方法.第6部分:建筑物橡膠和建筑物 | Activity measurement methods for the release of radioactive waste materials and nuclear facility components - Part 6: Building rubble and buildings |
| DIN 25487 | 核電廠建筑物的防水 | Water-proofing of buildings for nuclear power plants |
| DIN 276-1 Berichtigung 1 | 建筑物成本.第1部分:建筑物結構.對DIN 276-1-2006勘誤 | Building costs - Part 1: Building construction, Corrigenda to DIN 276-1:2006-11 |
| DIN 276-1 | 高層建筑成本.第1部分:建筑物 | Building costs - Part 1: Building construction |
| DIN 277-1 | 建筑物的面積和體積.第1部分:術語和計算基礎 | Areas and volumes of buildings - Part 1: Terminology, bases of calculation |
| DIN 277-2 | 建筑物的面積和體積.第2部分:純地面面積的分類(使用面積、技術操作面積和環行面積) | Areas and volumes of buildings - Part 2: Classification of net ground areas (utilization areas, technical operating areas and circulation areas) |
| DIN 277-3 | 建筑物的面積和體積.第3部分:數量和相關單位 | Areas and volumes of building - Part 3: Quantities and reference units |
| DIN 3227 | 建筑物飲用水供水閥.角輔助閥.要求和試驗 | Valves for potable water supply in buildings - Angle service valves - Requirements and tests |
| DIN 32736 Bb.1 | 建筑物管理.服務的定義和范圍.服務的比較 | Building Management - Definitions and scope of services - Comparison of services |
| DIN 32736 | 建筑物管理.服務的定義和范圍 | Building Management - Definitions and scope of services |
| DIN 32835-2 | 技術產品文件.設備管理文件.第2部分:建筑物用文件 | Technical product documentation - Facility management documentation - Part 2: Building occupancy documentation |
| DIN 4074-2 | 木材建筑構件用木材.建筑原木（針葉樹材）的質量條件 | Building Timber for Wood Building Components; Quality Conditions for Building Logs (Softwood) |
| DIN 4102-12 | 建筑材料和建筑構件的耐燃性能.第3部分:電纜系統的電路整體性維護.要求和試驗 | Fire behaviour of building materials and building components - Part 12: Circuit integrity maintenance of electric cable systems; requirements and testing |
| DIN 4102-13 | 建筑材料和構件的耐燃性能.耐火玻璃窗.概念、要求和試驗 | Fire behaviour of building materials and elements; fire resistant glazing; concepts, requirements and testing |
| DIN 4102-14 | 建筑材料和構件的耐燃性能.用熱輻射器測定地面覆層系統的燃燒特性 | Fire behaviour of building materials and elements; determination of the burning behaviour of floor covering systems using a radiant heat source |
| DIN 4102-15 | 建筑材料和構件耐燃性.防火豎井 | Fire behaviour of building materials and elements "Brandschacht" |
| DIN 4102-17 | 建筑材料和構件的防火性能.第17部分:礦物纖維絕緣材料熔點的測定.概念、要求和檢驗 | Fire behaviour of building materials and elements; determination of melting point of mineral fibre insulating materials; concepts, requirements and testing |
| DIN 4102-18 | 建筑材料和構件的防火性能.防火間隔.第18部分:自動關閉驗證(連續性性能檢驗) | Fire behaviour of building materials and components; fire barriers, verification of automatic closure (continuous performance test) |
| DIN 4102-22 | 建筑材料和構件的耐燃性能.第22部分:基于部分安全因素設計的DIN 4102-4的應用標準 | Fire behaviour of building materials and building components - Part 22: Application standard for DIN 4102-4 based on the design of partial safety factors |
| DIN 4102-3 | 建筑材料和構件的耐燃性能.耐火墻和不承重外墻.概念.要求和檢驗 | Fire Behaviour of Building Materials and Building Components; Fire Walls and Non-load-bearing External Walls; Definitions, Requirements and Tests |
| DIN 4102-4 | 建筑材料和建筑構件的耐火性能.概要和分級的建筑材料、構件和特種構件的應用 | Fire behaviour of building materials and building components; synopsis and application of classified building materials, components and special components |
| DIN 4102-4/A1 | 建筑材料和構件的耐燃性能.第4部分:分類的建筑材料、構件和特殊構件對照表和應用.修改件A1 | Fire behaviour of building materials and building components - Part 4: Synopsis and application of classified building materials, components and special components; Amendment A1 |
| DIN 4102-6 | 建筑材料和構件的耐燃性能.通風管道.定義、要求和試驗 | Fire Behaviour of Building Materials and Building Components; Ventilation Ducts; Definitions, Requirements and Tests |
| DIN 4102-7 | 建筑材料和構件耐燃性能.第7部分:屋頂.定義、要求和檢測 | Fire behaviour of building materials and building components - Part 7: Roofing; definitions, requirements and testing |
| DIN 4102-8 | 建筑材料和構件的耐燃性能.第8部分:小型試驗爐 | Fire behaviour of building materials and components - Part 8: Small scale test furnace |
| DIN 4102-9 | 建筑材料和構件易燃性.電纜抗穿透密封.術語 、要求和試驗 | Fire behaviour of building materials and elements; seals for cable penetrations; concepts, requirements and testing |
| DIN 4107 | 地基.觀察建造和建成的的建筑物的沉降 | Suboil; Settlement observations during and after construction of structures |
| DIN 4108 Bb.1 | 建筑物的隔熱.索引.主題目錄 | Thermal insulation in buildings; indexes; list of subjects |
| DIN 4108 Bb.2 | 建筑物中的隔熱和節能.熱橋.規劃和施工實例 | Thermal insulation and energy economy in buildings - Thermal bridges - Examples for planning and performance |
| DIN 4108-2 | 建筑物熱保護和節能.第2部分:最低絕熱要求 | Thermal protection and energy economy in buildings - Part 2: Minimum requirements to thermal insulation |
| DIN 4108-7 | 建筑物絕熱和能量經濟學.第7部分:建筑物氣密性.計劃和執行的要求、推薦標準和實例 | Thermal insulation and energy economy of buildings - Part 7: Airtightness of building, requirements, recommendations and examples for planning and performance |
| DIN 4109 Bb.1 | 建筑物隔音.結構實例和計算方法 | Sound insulation in buildings; construction examples and calculation methods |
| DIN 4109 Bb.1/A1 | 建筑物隔音.建筑實例和計算方法.修改件A1 | Sound insulation in buildings - Construction examples and calculation methods; Amendment A1 |
| DIN 4109 Bb.2 | 建筑物隔音.設計及施工指南.增強隔音效果建議.個人居住和工作區內隔音措施推薦標準 | Sound insulation in buildings; guidelines for planning and execution; proposals for increased sound insulation; recommendations for sound insulation in personal living and working areas |
| DIN 4109 Bb.3 | 建筑物隔音.根據實驗室聲音衰減指數Rw計算DIN4109規定舒適性評估指數Rw,R | Sound insulation in buildings - Calculation of R'<(Index)w,R> for assessing suitability as defined in DIN 4109 on the basis of the sound reduction index R<(Index)w> determined in laboratory tests |
| DIN 4109-11 | 建筑物隔音.第11部分:隔音檢定.質量和適用性檢驗 | Sound insulation in buildings - Part 11: Verification of sound insulation; Quality and suitability testing |
| DIN 4109 | 建筑物隔音.要求和檢驗 | Sound insulation in buildings; requirements and testing |
| DIN 4109/A1 | 建筑物的隔音處理.要求和驗證.修改件A1 | Sound insulation in buildings - Requirements and verifications; Amendment A1 |
| DIN 4123 | 現有建筑物范圍內的挖掘、地基和托換工程 | Excavations, foundations and underpinnings in the area of existing buildings |
| DIN 4140 | 工業和建筑設備的隔絕措施.隔熱和隔冷方式 | Insulation work on industrial installations and building equipment - Execution of thermal and cold insulations |
| DIN 4141-2/A1 | 建筑業支架.第2部分:橋梁鉸接系統.修改件1 | Structural bearings - Part 2: Articulation systems for bridges; Amendment 1 |
| DIN 4149 | 德國地震區建筑物.設計載荷、分析和建筑物結構設計 | Buildings in german earthquake areas - Design loads, analysis and structural design of buildings |
| DIN 4150-1 | 建筑物振動.第1部分:振動參數預測 | Vibrations in buildings - Part 1: Prediction of vibration parameters |
| DIN 4150-2 | 建筑物振動.第2部分:對建筑物內人員的影響 | Vibrations in buildings - Part 2: Effects on persons in buildings |
| DIN 4150-3 | 建筑物振動.第3部分:對建筑物結構的影響 | Vibration in buildings - Part 3: Effects on structures |
| DIN 4172 | 建筑結構的模數協調 | Modular Co-ordination in Building Construction |
| DIN 4301 | 土木工程和樓房建筑用鐵渣和金屬渣 | Ferrous and non-ferrous metallurgical slag for civil engineering and building construction use |
| DIN 4426 | 建筑物維修用安全設備.工作場所和通道的安全要求.設計和建造 | Equipment for building maintenance - Safety requirements for workplaces and accesses - Design and execution |
| DIN 45635-33 | 機器空氣噪聲的測量.包絡面法.建筑設備 | Measurement of airborne noise emitted by machines; enveloping surface method, construction equipment |
| DIN 45680 Bb.1 | 相鄰建筑低頻躁音侵?jǐn)_測量和評估.工業設施評估指南 | Measurement and assessment of low-frequency noise immissions in the neighbourhood - Guidelines for the assessment for industrial plants |
| DIN 45680 | 相鄰建筑低頻躁音侵?jǐn)_測量和評估 | Measurement and assessment of low-frequency noise immissions in the neighbourhood |
| DIN 459-1 | 建筑材料機械.混凝土和灰漿用攪拌機.第1部分:性能和尺寸的術語和定義 | Building material machines - Mixers for concrete and mortar - Part 1: Terms, determination of performance, sizes |
| DIN 459-2 | 建筑材料機械.混凝土和灰漿用攪拌機.第2部分:混凝土攪拌機的攪拌效率的檢驗規程 | Building material machines - Mixers for concrete and mortar - Part 2: Procedure for the examination of the mixing efficiency of concrete mixers |
| DIN 50929-2 | 金屬腐蝕.在承受外部腐蝕條件下金屬材料的腐蝕概率.建筑物內部使用的構件 | Corrosion of metals; probability of corrosion of metallic materials when subject to corrosion from the outside; service components inside buildings |
| DIN 51231-1 | 材料試驗機.建筑構件檢驗設備.第1部分:底板 | Material testing machines - Testing equipment for structural components - Part 1: Floor slabs |
| DIN 51302-2 | 材料試驗機.拉伸.加壓和彎曲試驗機的檢驗.建筑材料壓力試驗機的鉤檢驗 | Materials testing machines - Strain cylinder test method for compression testing machines for concrete |
| DIN 51308 | 建筑中應用和測量力用輔助裝置的驗證.夾緊裝置、液壓缸、夾緊工具用功率計 | Verification of auxiliary devices for application and measuring of forces in building - clamp-devices, hydraulic cylinders, dynamometer for clamp aim |
| DIN 52161-1 | 木材防腐劑的檢驗.木材中木材防腐劑的檢定.使用中結構建筑木材的抽樣 | Testing of wood preservatives - Detection of wood preservatives in wood - Sampling from structural timber in service |
| DIN 52210-6 | 建筑物聲學檢驗.氣載噪聲和隔音.第6部分:噪聲級差測量 | Testing of acoustics in buildings; airborne impact and sound insulation; measurement of level difference |
| DIN 52221 | 建筑聲學試驗.建筑物內技術裝備產生的結構噪聲的測量 | Tests in building acoustics - Measurements of structure-borne sound produced by technical appliances in buildings |
| DIN 52338 | 建筑用平板玻璃的試驗方法.疊層玻璃的落球試驗 | Methods of testing flat glass for use in buildings; ball drop test on laminated glass |
| DIN 52450 | 非金屬無機建筑材料.小試件上的收縮率和膨脹的測定 | Testing of inorganic non-metallic building materials; determination of shrinkage and expansion on small specimens |
| DIN 52451-1 | 建筑物用密封材料的試驗.第1部分:自流平填縫材料質量和體積變化的測定 | Testing of sealing materials for buildings - Part 1: Determination of change in mass and volume of self-levelling joint sealants |
| DIN 52452-1 | 建筑物密封材料與其他建筑材料的相容性測試 | Testing of building sealants for compatibility with construction materials |
| DIN 52452-2 | 建筑業中密封材料檢驗.密封材料的兼容性.與化學制品的兼容性 | Testing of sealants in building construction; compatibility of sealants; compatibility with chemicals |
| DIN 52452-4 | 建筑結構用密封材料的檢驗.密封材料的兼容性.與其他防護涂層材料的可混用性 | Testing of sealing compounds in building constructions; compatibility of sealing products; compatibility with other protection coatings |
| DIN 52455-1 | 建筑業密封材料試驗.粘合和膨脹試驗.第1部分:標準氣候、水或高溫預處理 | Testing of sealing compounds in buildings constructions - Adhesion and expansion test - Part 1: Conditioning in standard atmospheres, water,or increased temperatures |
| DIN 52455-3 | 建筑結構中密封劑的試驗.粘附試驗和伸長試驗.第3部分:透過玻璃光線的影響 | Testing of sealants in building construction - Adhesion and extension test - Part 3: Influence of light through glass |
| DIN 52459 | 建筑密封材料的檢驗.回填材料吸水性的測定.蓄水能力 | Testing of building sealants; determination of the water absorption of backfill material; retentive capacity |
| DIN 52461 | 建筑施工中密封化合物的試驗.新用的可噴接縫產品的耐雨強度 | Testing of sealing compounds in building construction - Rain strength of just applied sprayable jointing products |
| DIN 52612-2 | 隔熱材料的試驗.用保護平板設備測定導熱系數.建筑業中使用的測量值的換算 | Tesing of thermal insulating materials; determination of thermal conductivity by means of the guarded hot plate apparatus; conversion of the measured values for building applications |
| DIN 52612-3 | 絕熱材料的檢驗.第3部分:采用保護式熱板設備對導熱性的測定.建筑業應用的疊層材料的熱敏電阻 | Testing of Thermal Insulating Materials; Determination of Thermal Conductivity by the Guarded Hot Plate Apparatus; Thermal Resistance of Laminated Materials for Use in Building Practice |
| DIN 56920-2 | 劇場技術.第2部分:劇場建筑物術語 | Theatre technics; nomenclature, theatre buildings |
| DIN 57100-724 | 額定電壓≤1kV的電力設備安裝建筑物.家具和類似設備用具.帶簾子的壁架裝飾罩內的電氣設備(VDE規范) | Erection of power installations with rated voltages up to 1000 V; electrical equipment in furniture and similar fitments, e.g. curtain-ledges, decorative covering [VDE Specification]ts décoratifs |
| DIN 58125 | 學校建筑.防止意外的建筑要求 | Construction of schools - Constructional requirements for accident prevention |
| DIN 6280-13 | 發電機組.活塞式內燃機驅動的發電機組.第13部分:醫院和公共建筑物的應急安全供電 | Generating sets - Reciprocating internal combustion engines driven generating sets - Part 13: For emergency power supply in hospitals and public buildings |
| DIN 6779-12 | 技術產品和技術產品文件標識分類系統.第12部分:建筑物和建筑技術 | Structuring principles for technical products and technical product documentation - Part 12: Buildings and building technology |
| DIN 68800-1 | 建筑物中使用的木材防護.通用規范 | Protection of timber used in buildings; general specifications |
| DIN 68800-2 | 木材防腐.第2部分:建筑物預防措施 | Protection of timber - Part 2: Preventive constructional measures in buildings |
| DIN 68800-5 | 建筑物中使用的木材的防護.以木料為基的材料的化學防防護措施 | Protection of timber used in buildings; preventive chemical protection for wood based materials |
| DIN 77400 | 清潔服務設施.學校建筑物.清潔處理要求 | Cleaning services - School buildings - Requirements for the cleaning |
| DIN 86287 | 船舶和海上建筑結構的管道.帶插接口和插套的鋼管和管接頭.鋪設和處理 | Pipework on ships and marine structures - Steel pipes and fittings with spigot and socket - Laying and treatment |
| DIN CEN/TS 13126-10 | 窗和落地窗用建筑五金和配件.要求和試驗方法.第10部分:力臂平衡系統 | Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 10: Arm balancing systems; German version CEN/TS 13126-10:2004 |
| DIN CEN/TS 13126-11 | 窗和落地窗用建筑五金和配件.要求和試驗方法.第11部分:頂懸伸出翻轉五金 | Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 11: Top hung projecting reversible hardware; German version CEN/TS 13126-11:2004 |
| DIN CEN/TS 13126-12 | 窗和落地窗用建筑五金和配件.要求和試驗方法.第12部分:邊懸伸出翻轉五金 | Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 12: Side-hung projecting reversible hardware; German version CEN/TS 13126-12:2004 |
| DIN CEN/TS 13126-13 | 窗和落地窗用建筑五金和配件.要求和試驗方法.第13部分:窗框平衡 | Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 13: Sash balances; German version CEN/TS 13126-13:2004 |
| DIN CEN/TS 13126-14 | 窗和落地窗用建筑五金和配件.要求和試驗方法.第14部分:窗框扣件 | Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 14: Sash fasteners; German version CEN/TS 13126-14:2004 |
| DIN CEN/TS 13126-15 | 窗和落地窗用建筑五金和配件.要求和試驗方法.第15部分:滑輪 | Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 15: Rollers; German version CEN/TS 13126-15:2004 |
| DIN CEN/TS 13126-16 | 窗和落地窗用建筑五金和配件.要求和試驗方法.第16部分:提升和滑動系統配件 | Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 16: Fittings for lift and slide systems; German version CEN/TS 13126-16:2004 |
| DIN CEN/TS 13126-17 | 窗和落地窗用建筑五金和配件.要求和試驗方法.第17部分:傾斜和滑動系統配件 | Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 17: Fittings for tilt and slide systems; German version CEN/TS 13126-17:2004 |
| DIN CEN/TS 13126-2 | 窗和落地窗用建筑五金和配件.要求和試驗方法.第2部分:窗銷把手 | Building hardware, fittings for windows and door hight windows - Requirements and test methods - Part 2: Casement fastener handles; German version CEN/TS 13126-2:2004 |
| DIN CEN/TS 13126-3 | 窗和落地窗用建筑五金和配件.要求和試驗方法.第3部分:長插銷和滑鈕的操縱配件 | Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 3: Manoeuvring fittings for espagnolette bolts/sliding button; German version CEN/TS 13126-3:2004 |
| DIN CEN/TS 13126-4 | 窗和落地窗用建筑五金和配件.要求和試驗方法.第4部分:長插銷 | Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 4: Espagnolette bolts; German version CEN/TS 13126-4:2004 |
| DIN CEN/TS 13126-5 | 窗和落地窗用建筑五金和配件.要求和試驗方法.第5部分:開窗限制設備 | Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 5: Devices that restrict the opening of windows; German version CEN/TS 13126-5:2004 |
| DIN CEN/TS 13126-6 | 窗和落地窗用建筑五金和配件.要求和試驗方法.第6部分:(有或無摩擦系統的)可變幾何形狀固定鉸鏈 | Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 6: Variable geometry stay hinges (with or without a friction system); German version CEN/TS 13126-6:2004 |
| DIN CEN/TS 13126-9 | 窗和門高窗戶的建筑物五金和配件.要求和試驗方法.第9部分:尖軸鉸鏈 | Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 9: Pivot hinges; German version CEN/TS 13126-9:2004 |
| DIN CEN/TS 14383-3 | 犯罪行為預防.城市規劃和建筑物設計.第3部分:住宅 | Prevention of crime - Urban planning and building design - Part 3: Dwellings; German version CEN/TS 14383-3:2005 |
| DIN CEN/TS 15231 | 建筑自動化、控制和建筑管理中開放式數據通信.LONWORKS和BAC網之間的地圖 | Open data communication in building automation, controls and building management - Mapping between LONWORKS and BACnet; English version CEN/TS 15231:2006 |
| DIN CEN/TS 15331 | 建筑物維修設備的設計、管理和控制準則.德文版本 CEN/TS 15331-2005 | Criteria for design, management and control of maintenance services for buildings; German version CEN/TS 15331:2005 |
| DIN CEN/TS 15379 | 建筑管理.設備術語和使用范圍 | Building management - Terminology and scope of services; German version CEN/TS 15379:2006 |
| DIN CEN/TS 15447 | 建筑產品指南下防火試驗反應中的固定和安裝 | Mounting and fixing in reaction to fire tests under the Construction Products Directive; German version CEN/TS 15447:2006 |
| DIN EN 10169-2 | 連續有機覆層(覆層帶卷)扁平鋼軋材.第2部分:建筑物外部設施用品 | Continuously organic coated (coil coated) steel flat products - Part 2: Products for building exterior applications; English version of DIN EN 10169-2:2006-07 |
| DIN EN 10169-3 | 連續有機覆層(覆層帶卷)扁平鋼軋材.第3部分:建筑物內部設施用品 | Continuously organic coated (coil coated) steel flat products - Part 3: Products for building interior applications; German version EN 10169-3:2003 |
| DIN EN 1036 Bb.1 | 建筑物玻璃.室內部鍍銀浮法玻璃鏡.說明 | Glass in building - Mirrors from silver-coated float glass for internal use - Explanations |
| DIN EN 1036 | 建筑業玻璃.室內涂銀浮法玻璃鏡 | Glass in building - Mirrors from silver-coated float glass for internal use; German version EN 1036:1999 |
| DIN EN 1051-1 | 建筑物玻璃.玻璃空心磚和玻璃鋪面.第1部分:定義和描述 | Glass in building - Glass blocks and glass pavers - Part 1: Definitions and description; German version EN 1051-1:2003 |
| DIN EN 1051-2 | 建筑玻璃.玻璃磚和玻璃地面磚.第2部分:合格/產品標準的評定 | Glass in building - Glass blocks and glass pavers - Part 2: Evaluation of conformity/Product standard; German version EN 1051-2:2007 |
| DIN EN 1054 | 塑料管道系統.建筑物排污熱塑管道系統.連接件氣密性試驗方法 | Plastics piping systems - Thermoplastics piping systems for soil and waste discharge - Test method for airtightness of joints; German version EN 1054:1995 |
| DIN EN 1055 | 塑料管道系統.建筑物排水排污熱塑制管道系統.耐溫度循環試驗方法 | Plastics piping systems - Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for resistance to elevated temperature cycling; German version EN 1055:1996 |
| DIN EN 1062-11 Berichtigung 1 | 色漆和清漆.外部磚石建筑和混凝土用覆層材料和涂覆系統.第11部分:試驗前的調節方法.對DIN EN 1062-11-2002 | Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 11: Methods of conditioning before testing; German version EN 1062-11:2002, Corrigenda to DIN EN 1062-11:2002-10; German version EN 1062-11:2002/AC:2005 |
| DIN EN 1062-11 | 色漆和清漆.外部磚石建筑和混凝土用覆層材料和涂覆系統.試驗前的修整方法 | Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 11: Methods of conditioning before testing; German version EN 1062-11:2002 |
| DIN EN 1063 | 建筑物玻璃.安全玻璃.防彈玻璃試驗和分類 | Glass in building - Security glazing - Testing and classification of resistance against bullet attack; German version EN 1063:1999 |
| DIN EN 1091 | 建筑物外真空排污系統 | Vacuum sewerage systems outside buildings; German version EN 1091:1996 |
| DIN EN 1096-1 | 建筑業玻璃.涂層玻璃.第1部分:定義和分率 | Glass in building - Coated glass - Part 1: Definitions and classification; German version EN 1096-1:1998 |
| DIN EN 1096-2 | 建筑物玻璃.涂層玻璃.第2部分:A、B、S級涂層要求和試驗方法 | Glass in building - Coated glass - Part 2: Requirements and test methods for class A, B and S coatings; German version EN 1096-2:2001 |
| DIN EN 1096-3 | 建筑物玻璃.涂層玻璃.第3部分:C、D類涂層的要求和試驗方法 | Glass in building - Coated glass - Part 3: Requirements and test methods for class C and D coatings; German version EN 1096-3:2001 |
| DIN EN 1096-4 | 建筑物用玻璃.涂層玻璃.第4部分:合格評價/產品標準 | Glass in building - Coated glass - Part 4: Evaluation of conformity/Product standard; German version EN 1096-4:2004 |
| DIN EN 1125 | 建筑五金.用水平桿控制的應急出口裝置.要求和試驗方法 | Building hardware - Panic exit devices operated by a horizontal bar - Requirements and test methods (includes Amendment A1:2001); German version EN 1125:1997 + A1:2001 |
| DIN EN 1154 Bb.1 | 建筑五金件.控制門的關閉裝置.固定尺寸和安裝 | Building hardware - Controlled door closing devices - Fixing dimensions and installation |
| DIN EN 1154 Berichtigung 1 | 建筑五金.控制門鎖緊裝置.要求和檢驗方法(包括修改件A1-2002) | Building hardware - Controlled door closing devices - Requirements and test methods (includes amendment 1:2002); German version EN 1154:1996 + A1:2002, Corrigenda to DIN EN 1154:2003-04; German version EN 1154:1996/AC:2006 |
| DIN EN 1154 | 建筑物五金件.受控門鎖裝置.要求和試驗方法 | Building hardware - Controlled door closing devices - Requirements and test methods (includes amendment A1:2002); German version EN 1154:1996 + A1:2002 |
| DIN EN 1155 Berichtigung 1 | 建筑五金.旋轉門用電源固定裝置.要求和檢驗方法(包括修改件A1-2002) | Building hardware - Electrically powered hold-open devices for swing doors - Requirements and test methods (includes amendment A1:2002); German version EN 1155:1997 + A1:2002, Corrigenda to DIN EN 1155:2003-04; German version EN 1155:1997/AC:2006 |
| DIN EN 1155 | 建筑物五金件.旋轉門電動定位裝置.要求和試驗方法 | Building hardware - Electrically powered hold-open devices for swing doors - Requirements and test methods (includes amendment A1:2002); German version EN 1155:1997 + A1:2002 |
| DIN EN 1158 Berichtigung 1 | 建筑五金.門鎖緊裝置.要求和試驗方法(包括修改件A1-2002) | Building hardware - Door coordinator devices - Requirements and test methods (includes amendment A1:2002); German version EN 1158:1997 + A1:2002, Corrigenda to DIN EN 1158:2003-04; German version EN 1158:1997/AC:2006 |
| DIN EN 1158 | 建筑五金件.門調節裝置.要求和試驗方法 | Building hardware - Door coordinator devices - Requirements and test methods (includes amendment A1:2002); German version EN 1158:1997 + A1:2002 |
| DIN EN 1172 | 銅和銅合金.建筑用薄板和帶材 | Copper and copper alloys - Sheet and strip for building purposes; German version EN 1172:1996 |
| DIN EN 12050-1 | 建筑物和施工場地廢水提升裝置.制造和試驗原理.第1部分:含糞便廢水提升裝置 | Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 1: Lifting plants for wastewater containing faecal matter; German version EN 12050-1:2001 |
| DIN EN 12050-2 | 建筑物和現場用廢水提升裝置.施工和試驗原理.第2部分:無糞便廢水的提升裝置 | Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 2: Lifting plants for faecal-free wastewater; German version EN 12050-2:2000 |
| DIN EN 12050-3 | 建筑物和施工場地廢水提升裝置.制造和試驗原理.第3部分:限制使用的含糞便廢水提升裝置 | Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 3: Lifting plants for wastewater containing faecal matter for limited application; German version EN 12050-3:2000 |
| DIN EN 12050-4 | 建筑物和施工場地廢水提升裝置.制造和試驗原理.第4部分:無糞便廢水和含糞便廢水單向閥 | Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 4: Non-return valves for faecal-free wastewater and wastewater containing faecal matter; German version EN 12050-4:2000 |
| DIN EN 12051 | 建筑五金.門窗用螺栓.要求和試驗方法 | Building hardware - Door and window bolts - Requirements and test methods; German version EN 12051:1999 |
| DIN EN 12056-1 | 建筑物重力排水系統.第1部分:總則和性能要求 | Gravity drainage systems inside buildings - Part 1: General and performance requirements; German version EN 12056-1:2000 |
| DIN EN 12056-2 | 建筑物內重力排水系統.第2部分:衛生管道的布局和計算 | Gravity drainage systems inside buildings - Part 2: Sanitary pipework, layout and calculation; German version EN 12056-2:2000 |
| DIN EN 12056-3 | 建筑物重力排水系統.第3部分:屋頂排水、布局和計算 | Gravity drainage systems inside buildings - Part 3: Roof drainage, layout and calculation; German version EN 12056-3:2000 |
| DIN EN 12056-4 | 建筑物重力排水系統.第4部分:廢水提升設備、布置和計算 | Gravity drainage systems inside buildings - Part 4: Wastewater lifting plants, layout and calculation; German version EN 12056-4:2000 |
| DIN EN 12056-5 | 建筑物重力排水系統.第5部分:安裝、試驗及操作、維護和用戶說明書 | Gravity drainage systems inside buildings - Part 5: Installation and testing, instructions for operation, maintenance and user; German version EN 12056-5:2000 |
| DIN EN 12085 | 建筑業用隔熱材料.試樣線性尺寸測定 | Thermal insulating products for building applications - Determination of linear dimensions of test specimen; German version EN 12085:1997 |
| DIN EN 12086 | 建筑物絕熱產品.水蒸氣滲透性測定 | Thermal insulating products for building applications - Determination of water vapour transmission properties; German version EN 12086:1997 |
| DIN EN 12087 | 建筑用隔熱制品.用浸漬法測定長期吸水性 | Thermal insulating products for building applications - Determination of long term water absorption by immersion; German version EN 12087:1997 + A1:2006 |
| DIN EN 12088 | 建筑業用隔熱材料.通過滲透測定吸水量 | Thermal insulating products for building applications - Determination of long term water absorption by diffusion; German version EN 12088:1997 |
| DIN EN 12089 | 建筑物用熱絕緣產品.彎曲性能的測定; 德文版本 EN 12089:1997 | Thermal insulating products for building applications - Determination of bending behaviour; German version EN 12089:1997 |
| DIN EN 12090 | 建筑業用隔熱材料.剪切性能測定 | Thermal insulating products for building applications - Determination of shear behaviour; German version EN 12090:1997 |
| DIN EN 12091 | 建筑業用隔熱材料.耐霜露性測定 | Thermal insulating products for building applications - Determination of freeze-thaw resistance; German version EN 12091:1997 |
| DIN EN 12097 | 建筑物通風.空氣管道.空氣管道系統維護用空管組件要求 | Ventilation for buildings - Ductwork - Requirements for ductwork components to facilitate maintenance of ductwork systems; English version of DIN EN 12097:2006-11 |
| DIN EN 12109 | 建筑物內的真空排水系統 | Vacuum drainage systems inside buildings; German version EN 12109:1999 |
| DIN EN 12114 | 建筑物熱性能.建筑構件和部件透氣率.實驗室試驗方法 | Thermal performances of buildings - Air permeability of building components and building elements - Laboratory test method; German version EN 12114:2000 |
| DIN EN 1213 | 建筑閥門.建筑物飲用水銅合金截止閥.試驗和要求 | Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements; German version EN 1213:1999 |
| DIN EN 12150-1 | 建筑物用玻璃.熱鋼化硅酸鹽安全玻璃.第1部分:定義和說明 | Glass in building - Thermally toughened soda lime silicate safety glass - Part 1: Definition and description; German version EN 12150-1:2000 |
| DIN EN 12150-2 | 建筑物用玻璃.熱鋼化鈉鈣安全玻璃.第2部分:合格評價/產品標準 | Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard; German version EN 12150-2:2004 |
| DIN EN 12158-1 | 建筑物載貨提升機.第1部分:帶可達平臺的提升機 | Builders hoists for goods - Part 1: Hoists with accessible platforms; German version EN 12158-1:2000 |
| DIN EN 12158-2 | 建筑用貨物提升機.第2部分:帶不可達承載裝置的斜提升機 | Builders hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices; German version EN 12158-2:2000 |
| DIN EN 12159 | 帶垂直升降機箱的人和物料用建筑提升機 | Builders hoists for persons and materials with vertically guided cages; German version EN 12159:2000 |
| DIN EN 12170 | 建筑物的采暖系統.關于操作、維護和使用方面的文件制備程序.采暖系統要求有受過訓練的操作員; 德文版本 EN | Heating systems in buildings - Procedure for the preparation of document in respect of operation, maintenance and use - Heating systems requiring a trained operator; German version EN 12170:2002 |
| DIN EN 12171 | 建筑物的采暖系統.操作、維護和使用的文件制備程序.采暖系統操作員不須培訓; 德文版本 EN 12171:2002 | Heating systems in buildings - Procedure for the preparation of document for operation, maintenance and use - Heating systems not requiring a trained operator; German version EN 12171:2002 |
| DIN EN 1218-3 | 木材加工機械的安全性.開榫機.第3部分:建筑木材切割用手工喂料式帶滑動工作臺的開榫機; 德文版本 EN 1218-3 | Safety of woodworking machines - Tenoning machines - Part 3: Hand fed tenoning machines with sliding table for cutting structural timbers; German version EN 1218-3:2001 |
| DIN EN 12206-1 | 色漆和清漆.建筑用鋁和鋁合金涂層.第1部分:從涂料粉制備的涂層 | Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from coating powder; German version EN 12206-1:2004 |
| DIN EN 12209 Berichtigung 1 | 建筑五金.門鎖和插銷.機控鎖,插銷和鎖片.要求和試驗方法 | Building hardware - Locks and latches - Mechanically operated locks, latches and locking plates - Requirements and test methods; German version EN 12209:2003, Corrigenda to DIN EN 12209:2004-03; German version EN 12209:2003/AC:2005 |
| DIN EN 12209 | 建筑物五金.鎖和閂.機械鎖、閂和鎖板.要求和試驗方法 | Building hardware - Locks and latches - Mechanically operated locks, latches and locking plates - Requirements and test methods; German version EN 12209:2003 |
| DIN EN 12220 | 建筑物內通風.空氣管道.一般通風用圓形法蘭尺寸 | Ventilation for buildings - Ductwork - Dimensions of circular flanges for general ventilation; German version EN 12220:1998 |
| DIN EN 12236 | 建筑物通風.管道懸吊裝置和支撐物.強度要求 | Ventilation for buildings - Ductwork hangers and supports - Requirements for strength; German version EN 12236:2002 |
| DIN EN 12237 | 建筑物的通風.管道作業.圓形薄金屬板管道的強度和泄漏 | Ventilation for buildings - Ductwork - Strength and leakage of circular sheet metal ducts; German version EN 12237:2003 |
| DIN EN 12238 | 建筑物通風.空氣終端裝置.混流的空氣動力學試驗和額定值 | Ventilation for buildings - Air terminal devices - Aerodynamic testing and rating for mixed flow application; German version EN 12238:2001 |
| DIN EN 12239 | 建筑物通風.空氣終端裝置.空氣動力試驗和流動置換速率. | Ventilation for buildings - Air terminal devices - Aerodynamic testing and rating for displacement flow applications; German version EN 12239:2001 |
| DIN EN 12320 | 建筑五金.掛鎖和掛鎖配件.要求和試驗方法 | Building hardware - Padlocks and padlock fittings - Requirements and test methods; German version EN 12320:2001 |
| DIN EN 12337-1 | 建筑物玻璃.化學增強鈉鈣安全玻璃.第1部分:定義和描述 | Glass in building - Chemically strengthened soda lime silicate glass - Part 1: Definition and description; German version EN 12337-1:2000 |
| DIN EN 12337-2 | 建筑物用玻璃.化學增強鈉鈣安全玻璃.第2部分:合格評價/產品標準 | Glass in building - Chemically strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard; German version EN 12337-2:2004 |
| DIN EN 12354-1 | 建筑聲學.從產品性能評定建筑物的聲學性能.第1部分:房間之間對氣載聲音的隔絕 | Building acoustics - Estimation of acoustic performance of buildings from the performance of products - Part 1: Airborne sound insulation between rooms; German version EN 12354-1:2000 |
| DIN EN 12354-2 | 建筑聲學.根據元件性能評估建筑物聲學性能.第2部分:房間沖擊聲隔絕 | Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 2: Impact sound insulation between rooms; German version EN 12354-2:2000 |
| DIN EN 12354-3 | 建筑聲學.根據元件性能評定建筑物聲學性能.第3部分:室外氣載聲隔絕 | Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 3: Airborne sound insulation against outdoor sound; German version EN 12354-3:2000 |
| DIN EN 12354-4 | 建筑聲學.根據元件性能評估建筑物的聲學性能.第4部分:室內到室外聲音傳遞 | Building acoustics - Estimation of acoustic performance of buildings from the performance of products - Part 4: Transmission of indoor sound to the outside; German version EN 12354-4:2000 |
| DIN EN 12354-6 | 建筑聲學.從元件性能評估建筑物的聲學性能.第6部分:封閉空間的聲音吸收 | Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 6: Sound absorption in enclosed spaces; German version EN 12354-6:2003 |
| DIN EN 12365-1 | 建筑五金.門、窗、百葉窗和幕墻用密封墊和擋風雨條.第1部分:性能要求和分類 | Building hardware - Gaskets and weatherstripping for doors, windows, shutters and curtain walling - Part 1: Performance requirements and classification; German version EN 12365-1:2003 |
| DIN EN 12365-2 | 建筑五金.門、窗、百葉窗和幕墻用密封墊和擋風雨條.第2部分:線性壓力試驗方法 | Building hardware - Gaskets and weatherstripping for doors, windows, shutters and curtain walling - Part 2: Linear compression force test methods; German version EN 12365-2:2003 |
| DIN EN 12365-3 | 建筑五金.門、窗、百葉窗和幕墻用密封墊和擋風雨條.第3部分:彎曲回復試驗方法 | Building hardware - Gaskets and weatherstripping for doors, windows, shutters and curtain walling - Part 3: Deflection recovery test method; German version EN 12365-3:2003 |
| DIN EN 12365-4 | 建筑五金.門、窗、百葉窗和幕墻用密封墊和擋風雨條.第4部分:加速老化后回復的試驗方法 | Building hardware - Gaskets and weatherstripping for doors, windows, shutters and curtain walling - Part 4: Recovery after accelerated ageing test method; German version EN 12365-4:2003 |
| DIN EN 12429 | 建筑業隔熱材料.在特定的溫度和濕度條件下調節濕度平衡 | Thermal insulating products for building applications - Conditioning to moisture equilibrium under specified temperature and humidity conditions; German version EN 12429:1998 |
| DIN EN 12430 | 建筑用隔熱制品.在點載荷下測定性能 | Thermal insulating products for building applications - Determination of behaviour under point load; German version EN 12430:1998 + A1:2006 |
| DIN EN 12431 | 建筑用隔熱制品.浮隔地板絕緣制品的厚度測定 | Thermal insulating products for building applications - Determination of thickness for floating floor insulating products; German version EN 12431:1998 + A1:2006 |
| DIN EN 12524 | 建筑材料和產品.濕熱性能.表列設計值 | Building materials and products - Hygrothermal properties - Tabulated design values; German version EN 12524:2000 |
| DIN EN 1253-1 | 建筑物用集水溝.第1部分:要求 | Gullies for buildings - Part 1: Requirements; German version EN 1253-1:2003 |
| DIN EN 1253-2 | 建筑物的集水溝.第2部分:試驗方法 | Gullies for buildings - Part 2: Test methods; German version EN 1253-2:2003 |
| DIN EN 1253-3 | 建筑物的雨水進口.第3部分:質量控制 | Gullies for buildings - Part 3: Quality control; German version EN 1253-3:1999 |
| DIN EN 1253-4 | 建筑物的雨水進口.第4部分:入口封蓋物 | Gullies for buildings - Part 4: Access covers; German version EN 1253-4:1999 |
| DIN EN 1253-5 | 建筑物用集水溝.第5部分:可截流輕液體的集水溝 | Gullies for buildings - Part 5: Gullies with light liquids closure; German version EN 1253-5:2003 |
| DIN EN 12588 | 鉛和鉛合金.建筑用軋制鉛薄板 | Lead and lead alloys - Rolled lead sheet for building purposes; English version of DIN EN 12588:2007-03 |
| DIN EN 12589 | 建筑物通風.空氣終端設備.恒速和變速終端設備空氣動力學試驗和額定值 | Ventilation for buildings - Air terminal units - Aerodynamic testing and rating of constant and variable rate terminal units; German version EN 12589:2001 |
| DIN EN 12599 | 建筑物通風.已安裝的通風和空調系統交付使用試驗程序和測量方法 | Ventilation for buildings - Test procedures and measuring methods for handing over installed ventilation and air conditioning systems; German version EN 12599:2000 |
| DIN EN 12600 | 建筑物玻璃.擺錘試驗.沖擊試驗方法和平板玻璃分類 | Glass in building - Pendulum tests - Impact test method and classification for flat glass; German version EN 12600:2002 |
| DIN EN 12603 | 建筑物玻璃.魏布爾分布玻璃強度數據置信區間和適配性程序 | Glass in building - Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data; German version EN 12603:2002 |
| DIN EN 12629-1 | 混凝土和硅酸鹽建筑材料生產機械.安全性.第1部分:通用要求 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 1: Common requirements; German version EN 12629-1:2000 |
| DIN EN 12629-2 | 制造混凝土和硅酸鈣建筑產品的設備.安全.第2部分:砌塊制造機 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 2: Block making machines; German version EN 12629-2:2002 |
| DIN EN 12629-3 | 制造混凝土和硅酸鈣建筑產品的設備.安全.第3部分:滑動和轉盤機 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 3: Slide and turntable machines; German version EN 12629-3:2002 |
| DIN EN 12629-5-1 | 生產混凝土和硅酸鹽建筑產品用機器.安全.第5-1部分:垂直軸的管道制造機械 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-1: Pipe making machines manufacturing in the vertical axis; German version EN 12629-5-1:2003 |
| DIN EN 12629-5-2 | 生產混凝土和硅酸鹽建筑產品用機器.安全.第5-2部分:水平軸的管道制造機械 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-2: Pipe making machines manufacturing in the horizontal axis; German version EN 12629-5-2:2003 |
| DIN EN 12629-5-3 | 生產混凝土和硅酸鹽建筑產品用機器.安全.第5-3部分:管道預加應力機械 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-3: Pipe prestressing machines; German version EN 12629-5-3:2003 |
| DIN EN 12629-5-4 | 生產混凝土和硅酸鹽建筑產品用機器.安全.第5-4部分:混凝土管道涂層機械 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-4: Concrete pipe coating machines; German version EN 12629-5-4:2003 |
| DIN EN 12629-6 | 生產混凝土和硅酸鈣建筑產品用機器.安全.第6部分:生產預制加筋產品的固定和移動設備 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products; German version EN 12629-6:2004 |
| DIN EN 12629-7 | 生產混凝土和硅酸鹽建筑產品用機器.安全.第7部分:預應力產品的長線生產用固定和移動設備 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 7: Stationary and mobile equipment for long line manufacture of prestressed products; German version EN 12629-7:2004 |
| DIN EN 12629-8 | 制造混凝土和硅酸鹽建筑產品用生產設備.安全.第8部分:制造硅酸鹽(和混凝土)建筑產品用機器和設備 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 8: Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete); German version EN 12629-8:2002 |
| DIN EN 12664 | 建筑材料和產品的熱性能.用保溫板和熱流計測定耐熱性.中等耐熱性和低耐熱性干燥產品和潮濕產品 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products with medium and low thermal resistance; German version EN 12664:2001 |
| DIN EN 12667 | 建筑材料和產品熱性能.用保溫板和熱流計測定耐熱性.高耐熱性和中等耐熱性產品 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance; German version EN 12667:2001 |
| DIN EN 12758 | 建筑物用玻璃.玻璃裝配和空氣隔聲.定義和性能測定; 德文版本 EN 12758-1:2001 | Glass in building - Glazing and airborne sound insulation - Definitions and determination of properties; German version EN 12758-1:2001 |
| DIN EN 12763 | 建筑物排水系統纖維水泥管道和配件.尺寸和交貨技術條件 | Fibre-cement pipes and fittings for discharge systems for buildings - Dimensions and technical terms of delivery; German version EN 12763:2000 |
| DIN EN 1279-1 | 建筑用玻璃.絕緣玻璃組件.第1部分:概論、尺寸公差和系統描述規則 | Glass in building - Insulating glass units - Part 1: Generalities, dimensional tolerances and rules for the system description; German version EN 1279-1:2004 |
| DIN EN 1279-2 | 建筑玻璃.隔聲玻璃組件.第2部分:長期試驗法和透濕性要求 | Glass in building - Insulating glass units - Part 2: Long term test method and requirements for moisture penetration; German version EN 1279-2:2002 |
| DIN EN 1279-3 | 建筑物玻璃.絕緣玻璃組件.第3部分:長期試驗方法以及漏氣率和氣體濃度公差要求 | Glass in building - Insulating glass units - Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances; German version EN 1279-3:2002 |
| DIN EN 1279-4 | 建筑物用玻璃.絕緣玻璃組件.第4部分:邊緣密封件的物理屬性的試驗方法; 德文版本 EN 1279-4:2002 | Glass in building - Insulating glass units - Part 4: Methods of test for the physical attributes of edge seals; German version EN 1279-4:2002 |
| DIN EN 1279-5 | 建筑物用玻璃.絕緣玻璃組件.第5部分:合格評價 | Glass in building - Insulating glass units - Part 5: Evaluation of conformity; German version EN 1279-5:2005 |
| DIN EN 1279-6 | 建筑物用玻璃.絕緣玻璃組件.第6部分:工廠生產控制和周期試驗; 德文版本 EN 1279-6:2002 | Glass in building - Insulating glass units - Part 6: Factory production control and periodic tests; German version EN 1279-6:2002 |
| DIN EN 12792 | 建筑物通風.符號、術語和圖形符號 | Ventilation for buildings - Symbols, terminology and graphical symbols; German version EN 12792:2003 |
| DIN EN 12828 | 建筑物中的供暖系統.水基供暖系統的設計 | Heating systems in buildings - Design of water-based heating systems; German version EN 12828:2003 |
| DIN EN 12831 Bb.1 | 建筑物中的加熱系統.設計熱負荷的計算方法.國家標準附錄NA | Heating systems in buildings - Method for calculation of the design heat load - National Annex NA |
| DIN EN 12831 Bb.1/A1 | 建筑物加熱系統.設計熱負載的計算方法.國家附錄NA.修改件A1 | Heating systems in buildings - Method for calculation of the design heat load - National Annex NA; Amendment A1 |
| DIN EN 12831 | 建筑物供暖系統.設計供熱量計算方法 | Heating systems in buildings - Method for calculation of the design heat load; German version EN 12831:2003 |
| DIN EN 12865 | 建筑物構件和單元件濕熱性能.脈動空氣壓力下外墻系統防雨性能測定 | Hygrothermal performance of building components and building elements - Determination of the resistance of external wall systems to driving rain under pulsating air pressure; German version EN 12865:2001 |
| DIN EN 12878 | 基于水泥和/或石灰的建筑材料著色用顏料.規范和試驗方法 | Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test; English version of DIN EN 12878:2006-05 |
| DIN EN 1288-1 | 建筑物玻璃.玻璃彎曲強度測定.第1部分:玻璃試驗基本原則 | Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass; German version EN 1288-1:2000 |
| DIN EN 1288-2 | 建筑物玻璃.玻璃彎曲強度測定.第2部分:平板玻璃試樣表面大面積同軸雙環試驗 | Glass in building - Determination of the bending strength of glass - Part 2: Coaxial double ring test on flat specimens with large test surface areas; German version EN 1288-2:2000 |
| DIN EN 1288-3 | 建筑物用玻璃.玻璃彎曲強度測定.第3部分:(四點彎曲)兩點支撐試樣試驗 | Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending); German version EN 1288-3:2000 |
| DIN EN 1288-4 | 建筑物玻璃.玻璃彎曲強度測定.第4部分:U型玻璃試驗 | Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass; German version EN 1288-4:2000 |
| DIN EN 1288-5 | 建筑物玻璃.玻璃彎曲強度測定.第5部分:平板玻璃試樣表面小面積同軸雙環試驗 | Glass in building - Determination of the bending strength of glass - Part 5: Coaxial double ring test on flat specimens with small test surface areas; German version EN 1288-5:2000 |
| DIN EN 12898 | 建筑物玻璃.熱輻射測定 | Glass in building - Determination of the emissivity; German version EN 12898:2001 |
| DIN EN 12939 | 建筑材料和產品熱性能.用防護熱板和熱流量計測定熱阻.厚產品的高熱阻和中熱阻 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance; German version EN 12939:2000 |
| DIN EN 13009 | 建筑材料和產品濕熱性能.濕膨脹系數測定 | Hygrothermal performance of building materials and products - Determination of hygric expansion coefficient; German version EN 13009:2000 |
| DIN EN 13022-1 | 建筑玻璃.建筑密封玻璃.第1部分:支撐和無支撐單層和多層玻璃的建筑密封玻璃系統的玻璃產品 | Glass in building - Structural sealant glazing - Part 1: Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple glazing; English version of DIN EN 13022-1:2006-08 |
| DIN EN 13022-2 | 建筑玻璃.建筑密封玻璃.第2部分:安裝規范 | Glass in building - Structural sealant glazing - Part 2: Assembly rules; English version of DIN EN 13022-2:2006-08 |
| DIN EN 13024-1 | 建筑用玻璃.熱鋼化硼硅酸鹽安全玻璃.第1部分:定義和說明; 德文版本 EN 13024-1:2002 | Glass in building - Thermally toughened borosilicate safety glass - Part 1: Definition and description; German version EN 13024-1:2002 |
| DIN EN 13024-2 | 建筑用玻璃.熱鋼化硼硅酸鹽安全玻璃.第2部分:合格評價/產品標準 | Glass in building - Thermally toughened borosilicate safety glass - Part 2: Evaluation of conformity/Product standard; German version EN 13024-2:2004 |
| DIN EN 1303 | 建筑五金.鎖用圓柱形鎖芯.要求和試驗方法 | Building hardware - Cylinders for locks - Requirements and test methods; German version EN 1303:2005 |
| DIN EN 13030 | 建筑物通風.終端.通氣孔模擬雨試驗 | Ventilation for buildings - Terminals - Performance testing of louvres subjected to simulated rain; German version EN 13030:2001 |
| DIN EN 13053 | 建筑物通風.空氣調節裝置.裝置、部件和零件的額定值與性能 | Ventilation for buildings - Air handling units - Rating and performance for units, components and sections; German version EN 13053:2006 |
| DIN EN 13090 | 建筑物燃?xì)夤艿缆菁y接頭再密封方法 | Means for resealing threaded joints of gas pipework in buildings; German version EN 13090:2000 |
| DIN EN 13107 | 載人用索道裝置的安全要求.土木工程建筑 | Safety requirements for cableway installations designed to carry persons - Civil engeneering works; German version EN 13107:2004 |
| DIN EN 13126-1 | 建筑五金件.窗和落地窗的要求和試驗方法.第1部分:所有類型五金件的通用要求 | Building hardware - Requirements and test methods for windows and doors height windows - Part 1: Requirements common to all types of hardware English version of DIN EN 13126-1:2006-05 |
| DIN EN 13126-7 | 建筑五金.窗和門高窗的要求和試驗方法.第7部分:指形拉手 | Building hardware - Requirements and test methods for windows and door height windows - Part 7: Finger catches; German version EN 13126-7:2007 |
| DIN EN 13126-8 | 建筑五金件.窗和落地窗的要求和試驗方法.第8部分:傾斜和旋轉以及先傾斜和只旋轉的五金件 | Building hardware - Requirements and test methods for windows and doors height windows - Part 8: Tilt & Turn, Tilt-First and Turn-Only hardware English version of DIN EN 13126-8:2006-05 |
| DIN EN 13141-1 | 建筑物的通風.住宅通風用組件/產品的性能試驗.第1部分:外部和內部安裝的空氣傳送設備 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 1: Externally and internally mounted air transfer devices; German version EN 13141-1:2004 |
| DIN EN 13141-2 | 建筑物的通風.住宅通風用組件/產品的性能試驗.第2部分:排氣和供氣終端裝置 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 2: Exhaust and supply air terminal devices; German version EN 13141-2:2004 |
| DIN EN 13141-3 | 建筑物的通風.住宅通風用組件/產品的性能試驗.第3部分:住宅用排油煙機 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 3: Range hoods for residential use; German version EN 13141-3:2004 |
| DIN EN 13141-4 | 建筑物的通風.住宅用通風組件/產品的性能試驗.第4部分:住宅通風系統中使用的風扇 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 4: Fans used in residential ventilation systems; German version EN 13141-4:2004 |
| DIN EN 13141-5 | 建筑物通風.住宅通風用部件/產品的性能檢驗.通道和屋頂出口終端裝置 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 5: Cowls and roof outlet terminal devices; German version EN 13141-5:2004 |
| DIN EN 13141-6 | 建筑物的通風.住宅用通風組件/產品的性能試驗.第6部分:獨院住宅用排氣通風系統封殼 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 6: Exhaust ventilation system packages used in a single dwelling; German version EN 13141-6:2004 |
| DIN EN 13141-7 | 建筑物的通風.住宅通風用組件/產品的性能試驗.第7部分:獨戶住宅機械通風系統用機械供氣和排氣通風裝置(包括 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 7: Performance testing of mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for single family dwellings; German version EN 13141-7:2004 |
| DIN EN 13141-8 | 建筑物的通風.住宅通風用組件/產品的性能試驗.第8部分:機械通風系統的非輸送管供應和排氣通風元件(包括熱恢 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 8: Performance testing of un-ducted mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for a single room English version of DIN EN 13141-8:2006-05 |
| DIN EN 13142 | 建筑物的通風.住宅用通風組件/產品.必須和可選的性能特征 | Ventilation for buildings - Components/products for residential ventilation - Required and optional performance characteristics; German version EN 13142:2004 |
| DIN EN 13162 Berichtigung 1 | 建筑物用隔熱產品.工廠制礦物棉(MW)制品.規范 | Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification; German version EN 13162:2001, Corrigenda to DIN EN 13162:2001-10; German version EN 13162:2001/AC:2005 |
| DIN EN 13162 | 建筑物絕熱產品.工廠制礦棉制品.規范 | Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification; German version EN 13162:2001 |
| DIN EN 13163 Berichtigung 1 | 建筑物隔熱產品.工廠制彈性聚苯乙烯(EPS)制品.規范 | Thermal insulation products for buildings - Factory made products of expanded polystyrene (EPS) - Specification; German version EN 13163:2001, Corrigenda to DIN 13163:2001-10; German version EN 13163:2001/AC:2005 |
| DIN EN 13163 | 建筑物隔熱產品.工廠制彈性聚苯乙烯制品.規范 | Thermal insulation products for buildings - Factory made products of expanded polystyrene (EPS) - Specification; German version EN 13163:2001 |
| DIN EN 13164 Berichtigung 1 | 建筑物用絕熱產品.工廠制作的擠壓聚亞氨酯泡沫塑料(XPS)產品.規范 | Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification; German version EN 13164:2001, Corrigenda to DIN EN 13164:2001-10; German version EN 13164:2001/AC:2005 |
| DIN EN 13164 | 建筑物隔熱產品.工廠制彈性聚苯乙烯泡沫制品.規范 | Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification; German version EN 13164:2001 |
| DIN EN 13164/A1 | 建筑物用熱隔絕產品.擠壓聚苯乙烯泡沫的工廠制產品.規范 | Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification; German version EN 13164:2001/A1:2004 |
| DIN EN 13165 Berichtigung 1 | 建筑物用絕熱產品.工廠制作的硬質聚亞氨酯(PUR)泡沫塑料產品.規范 | Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification; German version EN 13165:2001 + A1:2004 + A2:2004, Corrigenda to DIN EN 13165:2005-02; German version EN 13165:2001/AC:2005 |
| DIN EN 13165 | 建筑物用隔熱產品.工廠制硬質聚氨酯泡沫制品.規范 | Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification; German version EN 13165:2001 + A1:2004 + A2:2004 |
| DIN EN 13166 Berichtigung 1 | 建筑物用絕熱產品.工廠生產的酚醛泡沫(PF)產品.規范 | Thermal insulation products for buildings - Factory made products of phenolic foam (PF) - Specification; German version EN 13166:2001, Corrigenda to DIN EN 13166:2001-10; German version EN 13166:2001/AC:2005 |
| DIN EN 13166 | 建筑物隔熱產品.工廠制酚醛泡沫制品.規范 | Thermal insulation products for buildings - Factory made products of phenolic foam (PF) - Specification; German version EN 13166:2001 |
| DIN EN 13166/A1 | 建筑物用熱隔絕產品.酚醛泡沫的工廠制產品.規范 | Thermal insulation products for buildings - Factory made products of phenolic foam (PF) - Specification; German version EN 13166:2001/A1:2004 |
| DIN EN 13167 Berichtigung 1 | 建筑物用絕熱產品.工廠制作的蜂窩狀玻璃產品(CG).規范 | Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification; German version EN 13167:2001, Corrigenda to DIN EN 13167:2001-10; German version EN 13167:2001/AC:2005 |
| DIN EN 13167 | 建筑物隔熱產品.工廠制多孔泡沫玻璃制品.規范 | Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification; German version EN 13167:2001 |
| DIN EN 13167/A1 | 建筑物用熱隔絕產品.工廠制泡沫玻璃產品.規范 | Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification; German version EN 13167:2001/A1:2004 |
| DIN EN 13168 Berichtigung 1 | 建筑物用絕熱產品.工廠生產的木絲(WW)產品.規范 | Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification; German version EN 13168:2001, Corrigenda to DIN EN 13168:2001-10; German version EN 13168:2001/AC:2005 |
| DIN EN 13168 | 建筑物隔熱產品.工廠制木纖維制品.規范 | Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification; German version EN 13168:2001 |
| DIN EN 13168/A1 | 建筑物用熱隔絕產品.工廠制木絲產品.規范 | Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification; German version EN 13168:2001/A1:2004 |
| DIN EN 13169 Berichtigung 1 | 建筑物用絕熱產品.工廠制作的膨脹的珍珠巖產品(EPB).規范 | Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification; German version EN 13169:2001, Corrigenda to DIN EN 13169:2001-10; German version EN 13169:2001/AC:2005 |
| DIN EN 13169 | 建筑物隔熱產品.工廠制彈性珍珠巖制品.規范 | Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification; German version EN 13169:2001 |
| DIN EN 13169/A1 | 建筑物用熱隔絕產品.工廠制膨脹珍珠巖.規范 | Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification; German version EN 13169:2001/A1:2004 |
| DIN EN 13170 Berichtigung 1 | 建筑物用絕熱產品.工廠制作的膨脹軟木(ICB)產品.規范 | Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification; German version EN 13170:2001, Corrigenda to DIN EN 13170:2001-10; German version EN 13170:2001/AC:2005 |
| DIN EN 13170 | 建筑物隔熱產品.工廠制彈性軟木制品.規范 | Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification; German version EN 13170:2001 |
| DIN EN 13171 Berichtigung 1 | 建筑物用絕熱產品.工廠生產的木纖維產品.規范 | Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification; German version EN 13171:2001, Corrigenda to DIN EN 13171:2001-10; German version EN 13171:2001/AC:2005 |
| DIN EN 13171 | 建筑物隔熱產品.工廠制木纖維制品.規范 | Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification; German version EN 13171:2001 |
| DIN EN 13171/A1 | 建筑物用熱隔絕產品.工廠制木纖維產品.規范 | Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification; German version EN 13171:2001/A1:2004 |
| DIN EN 13180 | 建筑物通風.通氣管結構.軟管尺寸和機械要求 | Ventilation for buildings - Ductwork - Dimensions and mechanical requirements for flexible ducts; German version EN 13180:2001 |
| DIN EN 13181 | 建筑物通風.終端.煙囪的性能試驗 | Ventilation for building - Terminals - Performance testing of louvres subject to simulated sand; German version EN 13181:2001 |
| DIN EN 13182 | 建筑物的通風設備.通風空間氣流速度測量用設備要求 (包括技術勘誤 AC:2002); 德文版本 EN 13182:2002 + AC: | Ventilation for buildings - Instrumentation requirements for air velocity measurements in ventilated spaces (including corrigendum AC:2002); German version EN 13182:2002 + AC:2002 |
| DIN EN 13187 | 建筑物熱性能.建筑物表層熱不均勻性定性檢測.紅外線法 | Thermal performance of buildings - Qualitative detection of thermal irregularities in building envelopes - Infrared method (ISO 6781:1983, modified); German version EN 13187:1998 |
| DIN EN 13242 | 土木工程和道路建筑用非結合和液壓結合材料用集料 | Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction; German version EN 13242:2002 |
| DIN EN 13245-1 | 塑料.建筑物用未增塑聚氯乙烯型材.第1部分:淺色型材的名稱與符號 | Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 1: Designation of light coloured profiles; German version EN 13245-1:2004 |
| DIN EN 13264 | 建筑物通風.地板固定空氣終端裝置.結構分類試驗 | Ventilation for buildings - Floor mounted air terminal devices - Tests for structural classification; German version EN 13264:2001 |
| DIN EN 1329-1 | 建筑物污物和污水排放(低溫和高溫)用塑料管道系統.未增塑聚氯乙烯(PVC-U).第1部分:管道、配件和系統規范; | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system; German version EN 1329-1:1999 |
| DIN EN 13309 | 建筑機械.帶有內部電源的機器的電磁兼容性 | Construction machinery - Electromagnetic compatibility of machines with internal electrical power supply; German version EN 13309:2000 |
| DIN EN 13321-1 | 建筑物自動控制和建筑物管理中的開放數據通訊.家庭和建筑物用電子設備.第1部分:產品和系統要求 | Open data communication in building automation, controls and building management - Home and building electronic system - Part 1: Product and system requirements; German version EN 13321-1:2006 |
| DIN EN 13321-2 | 建筑物自動控制和建筑物管理中的開放數據通訊.家庭和建筑物電子系統.第2部分:KNXnet/IP通信 | Open data communication in building automation, controls and building management - Home and building electronic systems - Part 2: KNXnet/IP Communication; English version EN 13321-2:2006 |
| DIN EN 1337-11 | 建筑業軸承.第11部分:運輸、儲存和安裝 | Structural bearings - Part 11: Transport, storage and installation; German version EN 1337-11:1997 |
| DIN EN 1337-9 | 建筑業軸承.第9部分:防護 | Structural bearings - Part 9: Protection; German version EN 1337-9:1997 |
| DIN EN 13380 | 建筑物外部排水和下水道系統翻新和修理構件一般要求 | General requirements for components used for renovation and repair of drain and sewer systems outside buildings; German version EN 13380:2001 |
| DIN EN 13403 | 建筑物通風.非金屬管.絕緣板制管道 | Ventilation for buildings - Non-metallic ducts - Ductwork made from insulation ductboards; German version EN 13403:2003 |
| DIN EN 13438 Berichtigung 1 | 涂料和清漆.建筑用鍍鋅或鍍鋅粉鋼產品用的粉末有機涂層 | Paints and varnishes - Powder organic coatings for galvanized or sherardised steel products for construction purposes; German version EN 13438:2005, Corrigenda to DIN EN 13438:2006-01 |
| DIN EN 13438 | 色漆和清漆.建筑用鍍鋅或粉末鍍鋅鋼產品用的粉末有機涂層 | Paints and varnishes - Powder organic coatings for galvanized or sherardised steel products for construction purposes; German version EN 13438:2005 |
| DIN EN 13443-2 | 建筑物內水調節設備.機械過濾器.第2部分:顆粒額定值1μm到80μm(不含80μm).性能、安全和測試要求 | Water conditioning equipment inside buildings - Mechanical filters - Part 2: Particle rating 1 ?m to less than 80 ?m - Requirements for performance, safety and testing; German version EN 13443-2:2005+A1:2007 |
| DIN EN 13465 | 建筑物通風.住房中空氣流動率測定的計算方法 | Ventilation for buildings - Calculation methods for the determination of air flow rates in dwellings; German version EN 13465:2004 |
| DIN EN 13467 | 建筑設備和工業設施隔熱制品.預制管絕緣層尺寸、垂直度和線性度測定 | Thermal insulating products for building equipment and industrial installations - Determination of dimensions, squareness and linearity of preformed pipe insulation; German version EN 13467:2001 |
| DIN EN 13468 | 建筑設備和工業設施隔熱制品.痕量水溶性氯化物、氟化物、硅酸鹽、鈉離子和pH值測定 | Thermal insulating products for building equipment and industrial installations - Determination of trace quantities of water soluble chloride, fluoride, silicate, and sodium ions and pH; German version EN 13468:2001 |
| DIN EN 13469 | 建筑設備和工業設施隔熱制品.預制管絕緣層水蒸汽滲透率測定 | Thermal insulating products for building equipment and industrial installations - Determination of water vapour transmission properties of preformed pipe insulation; German version EN 13469:2001 |
| DIN EN 13470 | 建筑設備和工業設施隔熱制品.預制管絕緣層外觀密度測定 | Thermal insulating products for building equipment and industrial installations - Determination of the apparent density of preformed pipe insulation; German version EN 13470:2001 |
| DIN EN 13471 | 建筑設備和工業設施隔熱制品.熱膨脹系數測定 | Thermal insulating products for building equipment and industrial installations - Determination of the coefficient of thermal expansion; German version EN 13471:2001 |
| DIN EN 13472 | 建筑設備和工業設施用隔熱制品.部分浸入法測定預制管絕緣層的短期吸水性 | Thermal insulating products for building equipment and industrial installations - Determination of short term water absorption by partial immersion of preformed pipe insulation; German version EN 13472:2001 |
| DIN EN 13494 | 建筑物隔熱產品.隔熱材料基底涂層和粘合劑拉伸連接強度測定 | Thermal insulation products for building applications - Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material; German version EN 13494:2002 |
| DIN EN 13495 | 建筑物隔熱產品.外部隔熱復合系統(ETICS)耐拉脫的測定(泡沫塊試驗) | Thermal insulation products for building applications - Determination of the pull-off resistance of external thermal insulation composite systems (ETICS) (foam block test); German version EN 13495:2002 |
| DIN EN 13496 | 建筑物熱絕緣產品.玻璃纖維絕熱網機械特性測定 | Thermal insulation products for building applications - Determination of the mechanical properties of glass fibre meshes; German version EN 13496:2002 |
| DIN EN 13497 | 建筑物隔熱產品.外部復合隔熱系統(ETICS)耐沖擊測定 | Thermal insulation products for building applications - Determination of the resistance to impact of external thermal insulation composite systems (ETICS); German version EN 13497:2002 |
| DIN EN 13498 | 建筑物隔熱產品.外部復合隔熱系統(ETICS)耐穿透度測定 | Thermal insulation products for building applications - Determination of the resistance to penetration of external thermal insulation composite systems (ETICS); German version EN 13498:2002 |
| DIN EN 13499 | 建筑物用保溫產品.基于多孔聚苯乙烯的外保溫復合系統(ETICS).規范 | Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on expanded polystyrene - Specification; German version EN 13499:2003 |
| DIN EN 13500 | 建筑物用保溫產品.基于礦棉的外保溫復合系統(ETICS).規范 | Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on mineral wool - Specification; German version EN 13500:2003 |
| DIN EN 13501-1 | 建筑產品和建筑物構件的火災分類.第1部分:根據著火試驗的反應數據分類 | Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests; German version EN 13501-1:2007 |
| DIN EN 13501-3 | 施工產品和建筑部件的燃燒性能分類.第3部分:對建筑服務設施中使用的產品和部件的耐火試驗數據進行分類:耐火 | Fire classification of construction products and building elements - Part 3: Classification using data from fire resistance tests on products and elements used in building service installations: fire resisting ducts and fire dampers; German version EN 13501-3:2005 |
| DIN EN 13501-4 | 施工產品和建筑部件燃燒性能分類.第4部分:煙控制系統構件耐火性試驗用數據分類 | Fire classification of construction products and building elements - Part 4: Classification using data from fire resistance tests on components of smoke control systems; German version EN 13501-4:2007 |
| DIN EN 13501-5 Berichtigung 1 | 施工產品和建筑部件的燃燒性能分類.第5部分:對外部屋頂燃燒試驗數據進行分類 | Fire classification of construction products and building elements - Part 5: Classification using data from external fire exposure to roofs tests; German version EN 13501-5:2005, Corrigenda to DIN EN 13501-5:2006-03 |
| DIN EN 13501-5 | 施工產品和建筑部件的燃燒性能分類.第5部分:對外部屋頂燃燒試驗數據進行分類.德文版本EN 13501-5-2005 | Fire classification of construction products and building elements - Part 5: Classification using data from external fire exposure to roofs tests; German version EN 13501-5:2005 |
| DIN EN 13508-1 | 建筑物外部排水和排污系統的條件.第1部分:一般要求 | Condition of drain and sewer systems outside buildings - Part 1: General requirements; German version EN 13508-1:2003 |
| DIN EN 13508-2 Berichtigung 1 | 建筑物外部排水和排污系統條件.第2部分:目視檢驗編碼系統.DIN EN 13508-2-2003技術勘誤 | Conditions of drain and sewer systems outside buildings - Part 2: Visual inspection coding system; German version EN 13508-2:2003, Corrigenda to DIN EN 13508-2:2003-09; German version EN 13508-2:2003/AC:2007 |
| DIN EN 13508-2 | 建筑物外部排水和排污系統條件.第2部分:目視檢驗編碼系統 | Conditions of drain and sewer systems outside buildings - Part 2: Visual inspection coding system; German version EN 13508-2:2003 |
| DIN EN 13541 | 建筑物玻璃.保險玻璃.防爆壓力試驗和分類 | Glass in building - Security glazing - Testing and classification of resistance against explosion pressure; German version EN 13541:2000 |
| DIN EN 13564-1 | 建筑物防淹裝置.第1部分:要求; 德文版本 EN 13564-1:2002 | Anti-flooding devices for buildings - Part 1: Requirements; German version EN 13564-1:2002 |
| DIN EN 13564-2 | 建筑物防水裝置.第2部分:試驗方法 | Anti-flooding devices for buildings - Part 2: Test methods; German version EN 13564-2:2002 |
| DIN EN 13564-3 | 建筑物用防水淹裝置.第3部分:質量保證 | Anti-flooding devices for buildings - Part 3: Quality assurance; German version EN 13564-3:2003 |
| DIN EN 13779 | 非居住用建筑物通風.通風和室內空調裝置的性能要求 | Ventilation for non-residential buildings - Performance requirements for ventilation and room-conditioning systems; German version EN 13779:2007 |
| DIN EN 13793 | 建筑物用保溫產品.周期性荷載下性能測定 | Thermal insulating products for building applications - Determination of behaviour under cyclic loading; German version EN 13793:2003 |
| DIN EN 13814 | 博覽會和露天游藝場機械和建筑物.安全 | Fairground and amusement park machinery and structures - Safety; German version EN 13814:2004 |
| DIN EN 13820 | 建筑物用保溫材料.有機物含量的測定 | Thermal insulating materials for building applications - Determination of organic content; German version EN 13820:2003 |
| DIN EN 13823 | 建筑產品燃燒試驗反應.建筑產品,包括遭受單一燃燒物熱襲擊的地板 | Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item; German version EN 13823:2002 |
| DIN EN 13828 | 建筑物用閥.建筑物內飲用水供應用手動銅合金和不銹鋼球閥.試驗和要求 | Building valves - Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings - Tests and requirements; German version EN 13828:2003 |
| DIN EN 13829 | 建筑物熱性能.建筑物空氣滲透率測定.風扇增壓法 | Thermal performance of buildings - Determination of air permeability of buildings - Fan pressurization method (ISO 9972:1996, modified); German version EN 13829:2000 |
| DIN EN 13986 | 建筑用木質板條.特性、合格評定和標記 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking; German version EN 13986:2004 |
| DIN EN 14095 | 建筑物內的水調節設備.鋁陽極電解質處理設備.性能、安全和試驗要求 | Water conditioning equipment inside buildings - Electrolytic treatment systems with aluminium anodes - Requirements for performance and safety, testing; German version EN 14095:2003 |
| DIN EN 14114 | 建筑設備和工業設施的濕熱性能.水蒸汽擴散計算.制冷管道絕緣系統; 德文版本 EN 14114:2002 | Hygrothermal performance of building equipment and industrial installations - Calculation of water vapour diffusion - Cold pipe insulation systems; German version EN 14114:2002 |
| DIN EN 14134 | 建筑物通風.住宅通風形態的性能試驗和安裝檢查 | Ventilation for buildings - Performance testing and installation checks of residential ventilation systems; German version EN 14134:2004 |
| DIN EN 14178-1 | 建筑物用玻璃.基本堿土硅酸鹽玻璃制品.第1部分:浮法玻璃 | Glass in building - Basic alkaline earth silicate glass products - Part 1: Float glass; German version EN 14178-1:2004 |
| DIN EN 14178-2 | 建筑物用玻璃.基本堿土硅酸鹽玻璃制品.第2部分:合格評價/產品標準 | Glass in Building - Basic alkaline earth silicate glass products - Part 2: Evaluation of conformity/Product standard; German version EN 14178-2:2004 |
| DIN EN 14179-1 | 建筑物用玻璃.吸熱熱鋼化硅酸鹽鈣鈉安全玻璃.第1部分:定義和描述 | Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 1: Definition and description; German version EN 14179-1:2005 |
| DIN EN 14179-2 | 建筑用玻璃.吸熱熱鋼化鈣鈉硅酸鹽安全玻璃.第2部分:合格評定/產品標準 | Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard; German version EN 14179-2:2005 |
| DIN EN 14239 | 建筑物通風.管道系統.管道系統表面積的測量 | Ventilation for buildings - Ductwork - Measurement of ductwork surface area; German Version EN 14239:2004 |
| DIN EN 14240 | 建筑物通風.冷凝天花板.試驗和等級 | Ventilation for buildings - Chilled ceilings - Testing and rating; German version EN 14240:2004 |
| DIN EN 14277 | 建筑物的通風.空氣終端裝置.在或接近ATD/充氣箱通過刻度傳感器測量氣流的方法 | Ventilation for buildings - Air terminal devices - Method for airflow measurement by calibrated sensors in or close to ATD/plenum boxes; English version of DIN EN 14277:2006-11 |
| DIN EN 14316-1 | 建筑物的熱絕緣產品.膨脹珍珠巖制品的現場熱絕緣成形.第1部分:粘結和松填裝產品的安裝前規范 | Thermal insulation products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation; German version EN 14316-1:2004 |
| DIN EN 14316-2 | 建筑物用熱絕緣產品.膨脹珍珠巖形成的現場熱絕緣產品.第2部分:安裝產品規范 | Thermal insulating products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 2: Specification for the installed products; English version of DIN EN 14316-2:2007-04 |
| DIN EN 14317-1 | 建筑物的熱絕緣產品.片狀蛭石產品的現場熱絕緣成形.第1部分:粘結和松填裝產品的安裝前規范 | Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation; German version EN 14317-1:2004 |
| DIN EN 14317-2 | 建筑物用熱絕緣產品.片狀蛭石形成的現場熱絕緣產品.第2部分:產品安裝規范 | Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 2: Specification for the installed products; English version of DIN EN 14317-2:2007-04 |
| DIN EN 14321-1 | 建筑物用玻璃.熱鋼化堿土硅酸鹽安全玻璃.第1部分:定義和描述 | Glass in building - Thermally toughened alkaline earth silicate safety glass - Part 1: Definition and description; German version EN 14321-1:2005 |
| DIN EN 14321-2 | 建筑物玻璃.熱鋼化堿土硅酸鹽安全玻璃.第2部分:合格評價/產品標準 | Glass in building - Thermally toughened alkaline earth silicate safety glass - Part 2: Evaluation of conformity/Product standard; German version EN 14321-2:2005 |
| DIN EN 14336 | 建筑物取暖系統.水基取暖系統的安裝和交付使用 | Heating systems in buildings - Installation and commissioning of water based heating systems; German version EN 14336:2004 |
| DIN EN 14337 | 建筑物的供熱系統.直接電房間供暖系統的設計和安裝.德文版本 EN 14337-2005 | Heating systems in buildings - Design and installation of direct electrical room heating systems; German version EN 14337:2005 |
| DIN EN 14383-1 | 犯罪防范.城市規劃和建筑設計.第1部分:專門術語的定義 | Prevention of crime - Urban planning and building design - Part 1: Definition of specific terms; Trilingual version EN 14383-1:2006 |
| DIN EN 14431 | 釉和搪瓷.用于建筑鋼板的瓷釉涂層的特性 | Vitreous and porcelain enamels - Characteristics of the enamel coatings applied to steel panels intended for architecture; German version EN 14431:2004 |
| DIN EN 14449 | 建筑物玻璃.夾層玻璃和夾層安全玻璃.合格評價/產品標準 | Glass in building - Laminated glass and laminated safety glass - Evaluation of conformity/Product standard; German version EN 14449:2005 |
| DIN EN 1451-1 | 建筑物結構體中的廢水和污物排放系統用塑料管道系統(低溫和高溫).聚丙烯(PP).第1部分:管、管接頭和管道系統 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system; German version EN 1451-1:1998 |
| DIN EN 14518 | 建筑物的通風.冷卻梁.無源冷卻梁的試驗和檢測 | Ventilation for buildings - Chilled beams - Testing and rating of passive chilled beams; German version EN 14518:2005 |
| DIN EN 1453-1 | 建筑物內污物和廢物排出(高溫和低溫)用承重墻管的塑料管道系統. 硬氯乙烯管(PVC-U).第1部分:管道和系統規范 | Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes and the system; German version EN 1453-1:2000 |
| DIN EN 1455-1 | 建筑結構中污物和廢水排放(低溫和高溫)用塑料管道系統.丙烯腈-丁二烯-苯乙烯共聚物.第1部分:管道、管件和系 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1: Specification for pipes, fittings and the system; German version EN 1455-1:1999 |
| DIN EN 14648 | 建筑五金.百葉窗配件.要求和試驗方法 | Building hardware - Fittings for shutters - Requirements and test methods; German version EN 14648:2007 |
| DIN EN 14652 | 建筑物內水處理設備.薄膜分離設備.性能、安全和試驗的要求 | Water conditioning equipment inside buildings - Membrane separation devices - Requirements for performance, safety and testing; German version EN 14652:2005+A1:2007 |
| DIN EN 14678-1 | LPG設備和附件.自動供應站的LPG設備的建筑和性能.第1部分:自動售貨機 | LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers English version of DIN EN 14678-1:2006-05 |
| DIN EN 14706 | 建筑設備和工業裝置用隔熱產品.最高使用溫度的測定.德文版本 EN 14706-2005 | Thermal insulation products for building equipment and industrial installations - Determination of maximum service temperature; German version EN 14706:2005 |
| DIN EN 14707 | 建筑設備和工業設施用絕熱制品.預制管絕緣層的最高安全使用溫度測定.德文版本 EN 14707-2005 | Thermal insulation products for building equipment and industrial installations - Determination of maximum service temperature for preformed pipe insulation; German version EN 14707:2005 |
| DIN EN 14743 | 建筑物內水處理設備.軟化劑.性能、安全和測試的要求 | Water conditioning equipment inside buildings - Softeners - Requirements for performance, safety and testing; German version EN 14743:2005+A1:2007 |
| DIN EN 14811 | 鐵路設施.軌道.專用鐵軌.凹槽及其相關建筑 | Railway applications - Track - Special purpose rail - Grooved and associated construction; English version of DIN EN 14811:2006-10 |
| DIN EN 14812 | 建筑物內水處理設備.化學藥品劑量.預調劑量系統.性能要求、安全和試驗.德文版本EN 14812:2005+A1-2007 | Water conditioning equipment inside buildings - Chemical dosing systems - Pre-set dosing systems - Requirements for performance, safety and testing; German version EN 14812:2005+A1:2007 |
| DIN EN 1487 | 建筑物閥門.液壓安全類.試驗和要求 | Building valves - Hydaulic safety groups - Tests and requirements; German version EN 1487:2000 |
| DIN EN 1488 | 建筑物閥門.膨脹類.試驗和要求 | Building valves - Expansion groups - Tests and requirements; German version EN 1488:2000 |
| DIN EN 1489 | 建筑物閥門.壓力安全閥門.試驗和要求 | Building valves - Pressure safety valves - Tests and requirements; German version EN 1489:2000 |
| DIN EN 14897 | 建筑物內水處理設備.水銀低壓紫外散熱器的使用設備.性能、安全和試驗要求 | Water conditioning equipment inside buildings - Devices using mercury low-pressure ultraviolet radiators - Requirements for performance, safety and testing; German version EN 14897:2006+A1:2007 |
| DIN EN 14898 | 建筑物內水處理設備.活性媒介過濾器.性能、安全和試驗要求 | Water conditioning equipment inside buildings - Active media filters - Requirements for performance, safety and testing; German version EN 14898:2006+A1:2007 |
| DIN EN 1490 | 建筑物閥門.組合型溫度壓力安全閥.試驗和要求 | Building valves - Combined temperature and pressure relief valves - Tests and requirements; German version EN 1490:2000 |
| DIN EN 14908-1 | 建筑自動化、控制和建筑管理的開放數據通信.建筑物網絡協議.第1部分:協議棧 | Open Data Communication in Building Automation, Controls and Building Management - Building Network Protocol - Part 1: Protocol Stack; English version EN 14908-1:2005 |
| DIN EN 14908-2 | 建筑自動化、控制和建筑管理的開放式數據通信.控制網絡協議.第2部分:雙扭線通信 | Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 2: Twisted Pair Communication; English version EN 14908-2:2005 |
| DIN EN 14908-3 | 建筑自動控制和建筑管理的開放式數據通訊.控制網絡協議.第3部分:功率線信道規范 | Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 3: Power Line Channel Specification; English version EN 14908-3:2006 |
| DIN EN 14908-4 | 建筑自動控制和建筑管理用開放式數據通訊.控制網絡協議.第4部分:IP通訊 | Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 4: IP Communication; English version EN 14908-4:2006 |
| DIN EN 1491 | 建筑物閥門.膨脹閥門.試驗和要求 | Building valves - Expansions valves - Tests and requirements; German version EN 1491:2000 |
| DIN EN 15026 | 建筑物構件和元件的溫濕性能.用數值模擬評估潮氣傳遞 | Hygrothermal performance of building components and building elements - Assessment of moisture transfer by numerical simulation; German version EN 15026:2007 |
| DIN EN 1505 | 建筑物通風.矩形截面薄板制通風管道和異型件.尺寸 | Ventilation for buildings - Sheet metal air ducts and fittings with rectangular cross-section - Dimensions; German version EN 1505:1997 |
| DIN EN 1506 | 建筑物通風.圓形截面薄板制通風管道和異型件.尺寸 | Ventilation for buildings - Sheet metal air ducts and fittings with circular cross-section - Dimensions; German version EN 1506:2007 |
| DIN EN 1507 | 建筑物通風.矩形面薄板金屬送氣管.強度和泄漏要求 | Ventilation for buildings - Sheet metal air ducts with rectangular section - Requirements for strength and leakage; English version of DIN EN 1507:2006-07 |
| DIN EN 15161 | 建筑物內水調節設備.安全、操作、維護和修理 | Water conditioning equipment inside buildings - Installation, operation, maintenance and repair; English version of DIN EN 15161:2007-02 |
| DIN EN 1519-1 | 建筑結構中排污(低溫和高溫)用塑料管道系統.聚乙烯(PE).第1部分:管、管件和系統的規范 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system; German version EN 1519-1:1999 |
| DIN EN 15217 | 建筑物能量性能.表示建筑物能量性能和能量認證的方法 | Energy performance of buildings - Methods for expressing energy performance and for energy certification of buildings; German version EN 15217:2007 |
| DIN EN 15219 | 建筑物內水調節設備.祛除硝酸鹽設備.性能、安全和試驗要求 | Water equipment inside buildings - Nitrate removal devices - Requirements for performance, safety and testing; English version of DIN EN 15219:2007-02 |
| DIN EN 15232 | 建筑物的能量性能.建筑自動化、控制和建筑管理的效果 | Energy performance of buildings - Impact of Building Automation, Controls and Building Management; German version EN 15232:2007 |
| DIN EN 15239 | 建筑物通風.建筑物能量性能.通風系統檢驗指南 | Ventilation for buildings - Energy performance of buildings - Guidelines for inspection of ventilation systems; German version EN 15239:2007 |
| DIN EN 15240 | 建筑物通風.建筑物能量性能.空調系統檢驗指南 | Ventilation for buildings - Energy performance of buildings - Guidelines for inspection of air-conditioning systems; German version EN 15240:2007 |
| DIN EN 15241 | 建筑物通風.商用建筑物中通風和滲透風量引起能量損耗的計算方法;德文版本 EN 15241:2007 | Ventilation for buildings - Calculation methods for energy losses due to ventilation and infiltration in commercial buildings; German version EN 15241:2007 |
| DIN EN 15242 | 建筑物通風.包含滲透的住房中空氣流動率測定的計算方法 | Ventilation for buildings - Calculation methods for the determination of air flow rates in buildings including infiltration; German version EN 15242:2007 |
| DIN EN 15243 | 建筑物通風.帶室內空氣調節系統建筑物用室溫和負荷及能量的計算 | Ventilation for buildings - Calculation of room temperatures and of load and energy for buildings with room conditioning systems; German version EN 15243:2007 |
| DIN EN 15251 | 建筑物選址室內空氣質量、熱環境、照明和聲學設計和能量性能評估用室內環境輸入?yún)?shù) | Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics; German version EN 15251:2007 |
| DIN EN 15255 | 建筑物的能量性能.有效的房間制冷負荷計算.一般標準和確認程序 | Energy performance of buildings - Sensible room cooling load calculation - General criteria and validation procedures; German version EN 15255:2007 |
| DIN EN 15265 | 建筑物的能量性能.用動力學方法計算對流加熱和制冷所需的能量.一般標準和確認程序 | Energy performance of buildings - Calculation of energy needs for space heating and cooling using dynamic methods - General criteria and validation procedures; German version EN 15265:2007 |
| DIN EN 15266 | 建筑物中工作壓力等于0.5bar的氣體用不銹鋼柔性波管工具 | Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar; German version EN 15266:2007 |
| DIN EN 1527 | 鎖扣和建筑五金.推拉門和折疊門用五金件.要求和檢驗方法 | Building hardware - Hardware for sliding doors and folding doors - Requirements and test methods; German version EN 1527:1998 |
| DIN EN 15316-1 | 建筑物供熱系統.系統能量要求和系統功效的計算方法.第1部分:總論 | Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 1: General; German version EN 15316-1:2007 |
| DIN EN 15316-2-1 | 建筑物供熱系統.系統能量要求和系統功效的計算方法.第2-1部分:對流式供暖排放系統 | Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 2-1: Space heating emission systems; German version EN 15316-2-1:2007 |
| DIN EN 15316-2-3 | 建筑物的供熱系統.系統能量要求和系統功效的計算方法.第2-3部分:對流式供暖分配系統 | Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 2-3: Space heating distribution systems; German version EN 15316-2-3:2007 |
| DIN EN 15316-3-1 | 建筑物供暖系統.系統能量要求和系統功效的計算方法.第3-1部分:家用熱水系統需求特征(出水要求) | Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 3-1: Domestic hot water systems, characterisation of needs (tapping requirements); German version EN 15316-3-1:2007 |
| DIN EN 15316-3-3 | 建筑物供暖系統.系統能量要求和系統功效的計算方法.第3-3部分:家用熱水器系統 | Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 3-3: Domestic hot water systems, generation; German version EN 15316-3-3:2007 |
| DIN EN 15316-4-3 | 建筑物供熱系統.系統能量要求和系統功效的計算方法.第4-3部分:發熱系統和熱太陽能系統 | Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-3: Heat generation systems, thermal solar systems; German version EN 15316-4-3:2007 |
| DIN EN 15316-4-4 | 建筑物供熱系統.系統能量要求和系統功效的計算方法.第4-4部分:發熱系統和建筑綜合同時發熱發電系統 | Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-4: Heat generation systems, building-integrated cogeneration systems; German version EN 15316-4-4:2007 |
| DIN EN 15316-4-5 | 建筑物供熱系統.系統能量要求和系統功效的計算方法.第4-5部分:對流式供暖系統和區域供暖及大型容積系統的性 | Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-5: Space heating generation systems, the performance and quality of district heating and large volume systems; German version EN 15316-4-5:2007 |
| DIN EN 15316-4-6 | 建筑物供熱系統.系統能量要求和系統功效的計算方法.第4-6部分:發熱系統和光電系統 | Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-6: Heat generation systems, photovoltaic systems; German version EN 15316-4-6:2007 |
| DIN EN 15377-3 | 建筑物供暖系統.內部水基表面加熱和冷卻系統的設計.第3部分:再生能源的使用優化 | Heating systems in buildings - Design of embedded water based surface heating and cooling systems - Part 3: Optimizing for use of renewable energy sources; German version EN 15377-3:2007 |
| DIN EN 15434 | 建筑玻璃.建筑和/或抗紫外線密封材料的產品標準（用于暴露密封的建筑密封打光和/或絕緣玻璃單元） | Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals) English version of DIN EN 15434:2006-08 |
| DIN EN 15450 | 建筑物加熱系統.熱泵加熱系統的設計 | Heating systems in buildings - Design of heat pump heating systems; German version EN 15450:2007 |
| DIN EN 1565-1 | 建筑結構中污物和廢水排放(低溫和高溫)用塑料管道系統.苯乙烯共聚摻混料(SAN+PVC).第1部分:管道、管件和系 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Styrene copolymer blends (SAN+PVC) - Part 1: Specifications for pipes, fittings and the system; German version EN 1565-1:1998 |
| DIN EN 1566-1 | 建筑結構中污物和廢水排放(低溫和高溫)用塑料管道系統.氯化聚氯乙烯(PVC-C).第1部分:管道、管件和系統規范 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: Specifications for pipes, fittings and the system; German version EN 1566-1:1998 |
| DIN EN 1567 | 建筑物閥門.水減壓閥和組合水減壓閥.要求和試驗 | Building valves - Water pressure reducing valves and combination water pressure reducing valves - Requirements and tests; German version EN 1567:1999 |
| DIN EN 1602 | 建筑物絕熱產品.表觀密度測定 | Thermal insulating products for building applications - Determination of the apparent density; German version EN 1602:1996 |
| DIN EN 1603 | 建筑用隔熱制品.在持續正常實驗室條件(23℃/50%相對濕度)下測定尺寸穩定性 | Thermal insulating products for building applications - Determination of dimensional stability under constant normal laboratory conditions (23 °C/ 50 % relative humidity); German version EN 1603:1996 + A1:2006 |
| DIN EN 1604 | 建筑用隔熱制品.在特定溫度和濕度條件下測定尺寸穩定性 | Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions; German version EN 1604:1996 + A1:2006 |
| DIN EN 1605 | 建筑用隔熱制品.在特定的壓力負荷和溫度條件下測定變形 | Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions; German version EN 1605:1996 + A1:2006 |
| DIN EN 1606 | 建筑用隔熱制品.壓縮蠕變的測定 | Thermal insulating products for building applications - Determination of compressive creep; German version EN 1606:1996 + A1:2006 |
| DIN EN 1607 | 建筑物絕熱產品.表面垂直抗拉強度測定 | Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces; German version EN 1607:1996 |
| DIN EN 1608 | 建筑物絕熱產品.表面平行抗拉強度測定 | Thermal insulating products for building applications - Determination of tensile strength parallel to faces; German version EN 1608:1996 |
| DIN EN 1609 | 建筑用隔熱制品.用部分浸漬法測定短期吸水性能 | Thermal insulating products for building applications - Determination of dimensional short term water absorption by partial immersion; German version EN 1609:1996 + A1:2006 |
| DIN EN 1620 | 生物技術.大規模處理和生產.與危險等級相應的建筑物 | Biotechnology - Large-scale process and production - Plant building according to the degree of hazard; German version EN 1620:1996 |
| DIN EN 1670 | 建筑五金器具.耐腐蝕.要求和試驗方法 | Building hardware - Corrosion resistance - Requirements and test methods; German version EN 1670:2007 |
| DIN EN 1671 | 建筑物外壓力排污系統 | Pressure sewerage systems outside buildings; German version EN 1671:1997 |
| DIN EN 1748-1-1 | 建筑玻璃.特種基礎產品.硼硅酸鹽玻璃.第1-1部分:定義和一般物理和機械性能 | Glass in building - Special basic products - Borosilicate glasses - Part 1-1: Definitions and general physical and mechanical properties; German version EN 1748-1-1:2004 |
| DIN EN 1748-1-2 | 建筑用玻璃.特種基礎產品.硼硅酸鹽玻璃.第1-2部分:合格評價/產品標準 | Glass in building - Special basic products - Borosilicate glasses - Part 1-2: Evaluation of conformity/Product standard; German version EN 1748-1-2:2004 |
| DIN EN 1748-2-1 | 建筑玻璃.特種基礎產品.玻璃陶瓷.第2-1部分:定義和一般物理和機械性能 | Glass in building - Special basic products - Glass ceramics - Part 2-1: Definitions and general physical and mechanical properties; German version EN 1748-2-1:2004 |
| DIN EN 1748-2-2 | 建筑用玻璃.特種基礎產品.玻璃陶瓷.第2-2部分:合格評價/產品標準 | Glass in building - Special basic products - Glass ceramics - Part 2-2: Evaluation of conformity/Product standard; German version EN 1748-2-2:2004 |
| DIN EN 1751 | 建筑物通風.氣配裝置.節流元件和閉鎖元件空氣動力檢驗 | Ventilation for buildings - Air terminal devices - Aerodynamic testing of dampers and valves; German version EN 1751:1998 |
| DIN EN 1775 | 供氣.建筑物用煤氣管道工程.最大工作壓力≤5bar.功能推薦 | Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations; German version EN 1775:2007 |
| DIN EN 179 | 建筑硬件.手柄或推轉柄操作的緊急出口裝置.要求和試驗方法 | Building hardware - Emergency exit devices operated by a lever handle or push pad - Requirements and test methods (includes Amendment A1:2001); German version EN 179:1997 + A1:2001 |
| DIN EN 1863-1 | 建筑物用玻璃.熱增強鈉鈣玻璃.第1部分:定義和說明 | Glass in building - Heat strengthened soda lime silicate glass - Part 1: Definition and description; German version EN 1863-1:2000 |
| DIN EN 1863-2 | 建筑物用玻璃.熱增強鈉鈣玻璃.第2部分:合格評價/產品標準 | Glass in building - Heat strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard; German version EN 1863-2:2004 |
| DIN EN 1870-1 | 木工機械安全.圓盤鋸床.第1部分:圓盤鋸架(帶和不帶滑動臺)、方板鋸和建筑工地用鋸 | Safety of woodworking machines - Circular sawing machines - Part 1: Circular saw benches (with and without sliding table), dimension saws and building site saws; German version EN 1870-1:2007 |
| DIN EN 1886 | 建筑物通風.中央室內通風設備.機械性能和測量方法 | Ventilation for buildings - Air handling units - Mechanical performance; German version EN 1886:1998 |
| DIN EN 1906 | 建筑五金件.杠桿式門拉手和旋鈕裝置.要求和試驗方法 | Building hardware - Lever handles and knob furniture - Requirements and test methods; German version EN 1906:2002 |
| DIN EN 1934 | 建筑物熱性能.熱阻測量.熱流計熱箱法.砌墻 | Termal performance of buildings - Determination of thermal resistance by hot box method using heat flow meter - Masonry; German version EN 1934:1998 |
| DIN EN 1935 | 建筑五金件.單軸鉸鏈.要求和試驗方法 | Building hardware - Single-axis hinges - Requirements and test methods; German version EN 1935:2002 |
| DIN EN 1946-1 | 建筑產品和建筑部件的熱性能.熱傳導性能實驗室評估專用準則.第1部分:通用準則 | Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 1: Common criteria; German version EN 1946-1:1999 |
| DIN EN 1946-2 | 建筑產品和建筑部件熱性能.熱傳導性能實驗室評估專用準則.第2部分:平板儀法測量 | Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 2: Measurements by the guarded hot plate method; German version EN 1946-2:1999 |
| DIN EN 1946-3 | 建筑產品和建筑部件熱性能.熱傳導性能實驗室評估專用準則.第3部分:熱流測量平板儀法 | Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 3: Measurements by the guarded heat flow meter method; German version EN 1946-3:1999 |
| DIN EN 1946-4 | 建筑產品和建筑部件的熱性能.實驗室評估熱傳導性能專用準則.第4部分:高溫箱測量法 | Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 4: Measurements by hot box methods; German version EN 1946-4:2000 |
| DIN EN 1946-5 | 建筑產品和部件熱性能.實驗室評估熱傳導性能專用準則.第5部分:管試驗測量法 | Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 5: Measurements by pipe test methods; German version EN 1946-5:2000 |
| DIN EN 1990/A1 | 歐洲法規:建筑設計基礎 | Eurocode: Basis of structural design English version of DIN EN 1990/A1:2006-04 |
| DIN EN 1991-1-1 | 歐洲法規1:對結構的作用.第1-1部分:一般作用.建筑物的比重、固有負荷和有效負荷 | Eurocode 1: Actions on structures - Part 1-1: General actions; Densities, self-weight, imposed loads for buildings; German version EN 1991-1-1:2002 |
| DIN EN 1991-1-2 | 歐洲法規1.對建筑物的作用.第1-2部分:一般作用.對建筑物防火的作用 | Eurocode 1 - Actions on structures - Part 1-2: General actions; Actions on structures exposed to fire; German version EN 1991-1-2:2002 |
| DIN EN 1991-4 | 歐洲法規1.建筑物作用.第4部分:筒倉和豎井 | Eurocode 1: Actions on structures - Part 4: Silos and tanks; English version of DIN EN 1991-4:2006-12 |
| DIN EN 1992-1-1 | 歐洲法規2.混凝土結構設計.第1-1部分:一般規則和建筑規則 | Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings; German version EN 1992-1-1:2004 |
| DIN EN 1993-1-1 Berichtigung 1 | 歐洲法規3:鋼結構的設計.第1-1部分:一般規則和建筑規則.DIN EN 1993-1-1-2005勘誤 | Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings; German version EN 1993-1-1:2005, Corrigenda to DIN EN 1993-1-1:2005-07; German version EN 1993-1-1:2005/AC:2006 |
| DIN EN 1993-1-1 | 歐洲法規3:鋼結構的設計.第1-1部分:一般規則和建筑物規則 | Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings; German version EN 1993-1-1:2005 |
| DIN EN 1994-1-1 | 歐洲法規4:復合鋼和混凝土結構的設計.第1-1部分:建筑規則和通用規則 | Eurocode 4: Design of composite steel and concrete structures - Part 1-1: General rules and rules for buildings; English version of DIN EN 1994-1-1:2004 |
| DIN EN 1995-1-1 | 歐洲法規 5:木材結構設計.第1-1部分：總則.一般原則和建筑原則.德文版本 EN 1995-1-1-2004 | Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings; German version EN 1995-1-1:2004 |
| DIN EN 1998-1 | 歐洲法規8:抗地震結構物設計.第1部分:建筑物的一般規則、地震作用和規則 | Eurocode 8: Design of structures for earthquake resistance - Part 1: General rules, seismic actions and rules for buildings; German version EN 1998-1:2004 |
| DIN EN 1998-3 | 歐洲法規8:抗地震結構設計.第3部分:建筑物的評定和翻新 | Eurocode 8: Design of structures for earthquake resistance - Part 3: Assessment and retrofitting of buildings; German version EN 1998-3:2005 |
| DIN EN 20140-10 | 聲學.建筑物和建筑物構件隔音性能測量.小型構件氣載聲隔離性能實驗室測量 | Acoustics - Measurement of sound insulation in buildings and of building elements - Part 10: Laboratory measurement of airborne sound insulation of small building elements; German version EN 20140-10:1992 |
| DIN EN 20140-2 | 聲學.建筑物和建筑物構件隔音性能測量.第2部分:精度數據的測定、驗證和應用 | Acoustics; measurement of sound insulation in buildings and of building elements; part 2: determination, verification and application of precision data (ISO 140-2:1991); German version EN 20140-2:1993 |
| DIN EN 26927 | 建筑結構.連接產品.密封劑.詞匯 | Building construction; jointing products; sealants; vocabulary (ISO 6927:1981); german version EN 26927:1990 |
| DIN EN 28394 | 建筑結構.連接產品.單組分密封劑可擠壓性的測定(ISO 8394:1988) | Building construction; jointing products; determination of extrudability of one-component sealants (ISO 8394:1988); german version EN 28394:1990 |
| DIN EN 29048 | 建筑結構.連接產品.用標準化的儀器測定密封劑的可擠壓性(ISO 9048:1987) | Building construction; jointing products; determination of extrudability of sealants using standardized apparatus (ISO 9048:1987); german version EN 29048:1990 |
| DIN EN 331 | 建筑物燃?xì)庠O(shè)備上的手動球閥和底部關閉錐形塞閥 | Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings; German version EN 331:1998 |
| DIN EN 356 | 建筑物玻璃.安全玻璃.防人力攻擊試驗和分類 | Glass in building - Security glazing - Testing and classification of resistance against manual attack; German version EN 356:1999 |
| DIN EN 357 | 建筑用玻璃.有透明或半透明玻璃制品的耐火鑲玻璃構件.耐火性分類 | Glass in building - Fire resistant glazed elements with transparent or translucent glass products - Classification of fire resistance; German version EN 357:2004 |
| DIN EN 410 | 建筑玻璃.窗玻璃發光特性和陽光輻射特性的測定 | Glass in building - Determination of luminous and solar characteristics of glazing; German version EN 410:1998 |
| DIN EN 459-1 | 建筑石灰.第1部分:定義、規范和符合性準則 | Building lime - Part 1: Definitions, specifications and conformity criteria; German version EN 459-1:2001 |
| DIN EN 459-2 | 建筑石灰.第2部分:試驗方法 | Building lime - Part 2: Test methods; German version EN 459-2:2001 |
| DIN EN 459-3 | 建筑石灰.第3部分:合格評定 | Building lime - Part 3: Conformity evaluation; German version EN 459-3:2001 |
| DIN EN 50090-2-1 | 住家和建筑物用電氣系統(HBES).第2-1部分:系統綜述.體系結構; 德文版本 EN 50090-2-1:1994 | Home and Building Electronic Systems (HBES) - Part 2-1: System overview; architecture; German version EN 50090-2-1:1994 |
| DIN EN 50090-2-2 | 住宅和建筑物電子系統(HBES).第2-2部分:系統概述.一般技術要求 | Home and Building Electronic Systems (HBES) - Part 2-2: System overview - General technical requirements; German version EN 50090-2-2:1996 + Corrigendum:1997 + A1:2002 + A2:2007 |
| DIN EN 50090-2-3 | 住宅和建筑物的電子系統(HBES).第2-3部分:系統綜述.HBES中產品的一般功能性安全要求 | Home and Building Electronic Systems (HBES) - Part 2-3: System overview - General functional safety requirements for products intended to be integrated in HBES; German version EN 50090-2-3:2005 |
| DIN EN 50090-3-1 | 住家和建筑物用電氣系統(HBES).第3-1部分:使用特點.使用構造介紹; 德文版本 EN 50090-3-1:1994 | Home and Building Electronic Systems (HBES) - Part 3-1: Aspects of application; introduction to the application structure; German version EN 50090-3-1:1994 |
| DIN EN 50090-3-2 | 家用和建筑物用電子系統(HBES).第3-2部分:使用方面.1類HBES的用戶說明 | Home and Building Electronic Systems (HBES) - Part 3-2: Aspects of application - User process for HBES Class 1; German version EN 50090-3-2:2004, text English |
| DIN EN 50090-4-1 | 家用和建筑物用電子系統.第4-1部分:媒介獨立層.HBES 1級應用層 | Home and Building Electronic Systems (HBES) - Part 4-1: Media independent layers - Application layer for HBES Class 1; German version EN 50090-4-1:2004, text English |
| DIN EN 50090-4-2 | 家用和建筑物用電子系統(HBES).第4-2部分:介質獨立層.1級HBES運輸層、網絡層和數據鏈路層的通用部分 | Home and Building Electronic Systems (HBES) - Part 4-2: Media independent layers - Transport layer, network layer and general parts of data link layer for HBES Class 1; German version EN 50090-4-2:2004, text English |
| DIN EN 50090-5-1 | 家用和建筑物用電子系統(HBES).第5-1部分:介質和介質相關層.1類HBES用輸電線 | Home and Building Electronic Systems (HBES) - Part 5-1: Media and media dependent layers - Power line for HBES Class 1; German version EN 50090-5-1:2005, text English |
| DIN EN 50090-5-2 | 家用和建筑物用電子系統(HBES).第5-2部分:介質和介質相關層.基于HBES1類的雙扭線網絡 | Home and Building Electronic Systems (HBES) - Part 5-2: Media and media dependent layers - Network based on HBES Class 1, Twisted Pair; German version EN 50090-5-2:2004, text English |
| DIN EN 50090-5-3 | 家用和建筑物用電子系統(HBES).第5-3部分:媒介和媒介附屬層.無線電頻率 | Home and Building Electronic Systems (HBES) - Part 5-3: Media and media dependent layers - Radio frequency; English version EN 50090-5-3:2006 |
| DIN EN 50090-7-1 | 家用和建筑物用電子系統(HBES).第7-1部分:系統管理.管理規程 | Home and Building Electronic Systems (HBES) - Part 7-1: System management - Management procedures; German version EN 50090-7-1:2004, text English |
| DIN EN 50090-8 | 家用和建筑物用電子系統(HBES).第8部分:產品合格評定 | Home and Building Electronic Systems (HBES) - Part 8: Conformity assessment of products; German version EN 50090-8:2000 |
| DIN EN 50098-1 | 建筑群中信息電纜敷設.第1部分:ISDN基礎連接 | Customer premises cabling for information technology - Part 1: ISDN basic access; German version EN 50098-1:1998 + A1:2002 + Corrigendum January 2003 |
| DIN EN 50098-2 | 建筑物信息電纜敷設.第2部分:2048 千字節/秒ISDN初級多路傳送連接和租用專線網絡接口 | Customer premises cabling for information technology - Part 2: 2048 kbit/s ISDN primary access and leased line network interface; German version EN 50098-2:1996 |
| DIN EN 50173-3 | 信息技術.通用布線系統.第3部分:工業建筑 | Information technology - Generic cabling systems - Part 3: Industrial premises; German version EN 50173-3:2007 |
| DIN EN 50173-4 | 信息技術.通用布線系統.第4部分:住宅建筑 | Information technology - Generic cabling systems - Part 4: Residential premises; German version EN 50173-4:2007 |
| DIN EN 50174-2 | 信息技術.電纜安裝.第2部分:建筑物內的安裝計劃和慣例. | Information technology - Cabling installation - Part 2: Installation planning and practices inside buildings; German version EN 50174-2:2000 |
| DIN EN 50288-2-1 | 用于模擬和數字通信和控制的多元金屬電纜.第2-1部分:100MHZ及以下的屏蔽電纜的分規范.水平和建筑物主干電纜 | Multi-element metallic cables used in analogue and digital communication and control - Part 2-1: Sectional specification for screened cables characterised up to 100 MHz - Horizontal and building backbone cables; German version EN 50288-2-1:2003 |
| DIN EN 50288-3-1 | 用于模擬和數字通信和控制的多元金屬電纜.第3-1部分:100MHZ及以下的非屏蔽電纜的分規范.水平和建筑物主干電 | Multi-element metallic cables used in analogue and digital communication and control - Part 3-1: Sectional specification for unscreened cables characterised up to 100 MHz - Horizontal and building backbone cables; German version EN 50288-3-1:2003 |
| DIN EN 50288-4-1 | 用于模擬和數字通信和控制的多元金屬電纜.第4-1部分:600MHZ及以下的非屏蔽電纜的分規范.水平和建筑物主干電 | Multi-element metallic cables used in analogue and digital communication and control - Part 4-1: Sectional specification for screened cables characterised up to 600 MHz - Horizontal and building backbone cables; German version EN 50288-4-1:2003 |
| DIN EN 50288-5-1 | 用于模擬和數字通信和控制的多元件金屬電纜.第5-1部分:250 MHz及以下的屏蔽電纜的分規范.水平及建筑物主電 | Multi-element metallic cables used in analogue and digital communication and control - Part 5-1: Sectional specification for screened cables characterized up to 250 MHz - Horizontal and building backbone cables; German version EN 50288-5-1:2003 |
| DIN EN 50288-6-1 | 用于模擬和數字通信和控制的多元件金屬電纜.第6-1部分:250 MHz及以下的非屏蔽電纜的分規范.水平和建筑物主 | Multi-element metallic cables used in analogue and digital communication and control - Part 6-1: Sectional specification for unscreened cables characterised up to 250 MHz - Horizontal and building backbone cables; German version EN 50288-6-1:2003 |
| DIN EN 50310 | 建筑物內信息技術設備連接和接地應用 | Application of equipotential bonding and earthing in buildings with information technology equipment; German version EN 50310:2006 |
| DIN EN 50428 | 家用和類似固定電氣設備用開關.并列標準.家庭和建筑物電子系統(HBES)用開關和相關附件 | Switches for household and similar fixed electrical installations - Collateral standard - Switches and related accessories for use in home and building electronic systems (HBES); German version EN 50428:2005 |
| DIN EN 572-1 | 建筑用玻璃.基本鈉鈣玻璃制品.第1部分:定義和一般物理及機械特性 | Glass in building - Basic soda lime silicate glass products - Part 1: Definitions and general physical and mechanical properties; German version EN 572-1:2004 |
| DIN EN 572-2 | 建筑用玻璃.基本鈉鈣玻璃制品.第2部分:平板玻璃 | Glass in building - Basic soda lime silicate glass products - Part 2: Float glass; German version EN 572-2:2004 |
| DIN EN 572-3 | 建筑用玻璃.基本鈉鈣玻璃制品.第3部分:拋光嵌絲玻璃 | Glass in building - Basic soda lime silicate glass products - Part 3: Polished wire glass; German version EN 572-3:2004 |
| DIN EN 572-4 | 建筑用玻璃.基本鈉鈣玻璃制品.第4部分:拉制平板玻璃 | Glass in building - Basic soda lime silicate glass products - Part 4: Drawn sheet glass; German version EN 572-4:2004 |
| DIN EN 572-5 | 建筑用玻璃.基本鈉鈣玻璃制品.第5部分:壓花玻璃 | Glass in building - Basic soda lime silicate glass products - Part 5: Patterned glass; German version EN 572-5:2004 |
| DIN EN 572-6 | 建筑用玻璃.基本鈉鈣玻璃制品.第6部分:嵌絲壓花玻璃 | Glass in building - Basic soda lime silicate glass products - Part 6: Wired patterned glass; German version EN 572-6:2004 |
| DIN EN 572-7 | 建筑用玻璃.基本鈉鈣玻璃制品.第7部分:嵌絲或不嵌絲的槽形玻璃 | Glass in building - Basic soda lime silicate glass products - Part 7: Wired or unwired channel shaped glass; German version EN 572-7:2004 |
| DIN EN 572-8 | 建筑用玻璃.基本鈉鈣玻璃產品.第8部分:供貨和最終切割尺寸 | Glass in building - Basic soda lime silicate glass products - Part 8: Supplied and final cut sizes; German version EN 572-8:2004 |
| DIN EN 572-9 | 建筑用玻璃.基本鈉鈣玻璃產品.第9部分:合格性評定/產品標準 | Glass in building - Basic soda lime silicate glass products - Part 9: Evaluation of conformity/Product standard; German version EN 572-9:2004 |
| DIN EN 60617-11 | 線圖圖形符號.第11部分:建筑物與地形測量平面圖和線圖 | Graphical symbols for diagrams - Part 11: Architectural and topographical installation plans and diagrams (IEC 60617-11:1996); German version EN 60617-11:1996 |
| DIN EN 60794-2-21 | 光纜.第2-21部分:室內光纜.建筑群用多模光纖配電電纜的詳細規范(IEC 60794-2-21-2005) | Optical fibre cables - Part 2-21: Indoor cables - Detailed specification for multi-fibre optical distribution cables for use in premises cabling (IEC 60794-2-21:2005); German version EN 60794-2-21:2006 |
| DIN EN 60794-2-31 | 光學纖維電纜.第2-31部分:室內電纜.建筑群布纜用光纖帶狀電纜的詳細規范(IEC 60794-2-31:2005) | Optical fibre cables - Part 2-31: Indoor cables - Detailed specification for optical fibre ribbon cables for use in premises cabling (IEC 60794-2-31:2005); German version EN 60794-2-31:2006 |
| DIN EN 60794-3-12 | 光纜電纜.第3-12部分:室外電纜.建筑布線用管道和直埋通信光纜的詳細規范 | Optical fibre cables - Part 3-12: Outdoor cables - Detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling (IEC 60794-3-12:2005); German version EN 60794-3-12:2006 |
| DIN EN 62305-2 Bb.1 | 雷電防護.第2部分:風險管理:建筑物風險評估.補充件1:德國的雷電威脅 | Protection against lightning - Part 2: Risk management: Assessment of risk for structures - Supplement 1: Lightning threat in Germany |
| DIN EN 62305-2 Bb.2 | 避雷.第2部分:風險管理.附錄2:建筑物風險評估計算方式 | Protection against lightning - Part 2: Risk management - Supplement 2: Calculation assistance for assessment of risk for structures |
| DIN EN 62305-3 Bb.1 | 避雷系統.第3部分:對建筑物的物理損傷和壽命危害.補充件1:應用DIN EN 62305-3(VDE 0185-305-3)的補充信息 | Protection against lightning - Part 3: Physical damage to structures and life hazard - Supplement 1: Additional information for the application of DIN EN 62305-3 (VDE 0185-305-3) |
| DIN EN 62305-3 Bb.2 | 避雷系統.第3部分:對建筑物的物理損傷和壽命危害.補充件2:特殊建筑物的補充信息 | Protection against lightning - Part 3: Physical damage to structures and life hazard - Supplement 2: Additional information for special structures |
| DIN EN 62305-3 Bb.3 | 避雷系統.第3部分:對建筑物的物理損傷和壽命危害.補充件3:測試和維護避雷系統的補充信息 | Protection against lightning - Part 3: Physical damage to structures and life hazard - Supplement 3: Additional information for the testing and maintenance of lightning protection systems |
| DIN EN 62305-3 Berichtigung 1 | 雷電防護.第3部分:建筑物物理損壞和生命危險.DIN EN 62305-3 (VDE 0185-305-3)-2006技術勘誤 | Protection against lightning - Part 3: Physical damage to structures and life hazard (IEC 62305-3:2006, modified); German version EN 62305-3:2006, Corrigenda to DIN EN 62305-3 (VDE 0185-305-3):2006-10; German version CENELEC-Cor.:2006 to EN 62305-3:2006 |
| DIN EN 62305-3 | 避雷系統.第3部分:對建筑物的物理損傷和壽命危害(IEC 62305-3-2006, 修改) | Protection against lightning - Part 3: Physical damage to structures and life hazard (IEC 62305-3:2006, modified); German version EN 62305-3:2006 |
| DIN EN 62305-4 Berichtigung 1 | 雷電防護.第4部分:建筑物內電氣和電子系統.DIN EN 62305-4 (VDE 0185-305-4)-2006技術勘誤 | Protection against lightning - Part 4: Electrical and electronic systems within structures (IEC 62305-4:2006); German version EN 62305-4:2006, Corrigenda to DIN EN 62305-4 (VDE 0185-305-4):2006-10; German version CENELEC-Cor.:2006 to EN 62305-4:2006 |
| DIN EN 62305-4 | 避雷.第4部分:建筑物中電氣和電子系統(IEC 62305-4-2006) | Protection against lightning - Part 4: Electrical and electronic systems within structures (IEC 62305-4:2006); German version EN 62305-4:2006 |
| DIN EN 673 | 建筑物用玻璃.傳熱系數(U值)的測定.計算方法 | Glass in building - Determination of thermal transmittance (U value) - Calculation method (including Amendment A1:2000 + Amendment A2:2002); German version EN 673:1997 + A1:2000 + A2:2002 |
| DIN EN 674 | 建筑物用玻璃.導熱系數(U值)的測定.防護熱板法 | Glass in building - Determination of the thermal transmittance (U value) - Guarded hot plate method; German version EN 674:1997 |
| DIN EN 675 | 建筑物用玻璃.導熱系數(U值)的測定.熱流量計法 | Glass in building - Determination of the thermal transmittance (U value) - Heat flow meter method; German version EN 675:1997 |
| DIN EN 752 Bb.1 | 建筑物外的污水和排放系統.索引 | Drain and sewer systems outside buildings - Index |
| DIN EN 752-1 | 建筑物外部排水系統.第1部分:概述和定義 | Drain and sewer systems outside buildings - Part 1: Generalities and definitions; German version EN 752-1:1995 |
| DIN EN 752-2 | 建筑物外部排水系統.第2部分:性能要求 | Drain and sewer systems outside buildings - Part 2: Performance requirements; German version EN 752-2:1996 |
| DIN EN 752-3 | 建筑物外部排水系統.第3部分:規劃 | Drain and sewer systems outside buildings - Part 3: Planning; German version EN 752-3:1996 |
| DIN EN 752-4 | 建筑物外部排水系統.第4部分:液壓設計和對環境的考慮 | Drain and sewer systems outside buildings - Part 4: Hydraulic design and environmental considerations; German version EN 752-4:1997 |
| DIN EN 752-5 | 建筑物外部排水系統.第5部分:整理復原 | Drain and sewer systems outside buildings - Part 5: Rehabilitation; German version EN 752-5:1997 |
| DIN EN 752-6 | 建筑物外部排水和污水系統.第6部分:泵設備 | Drain and sewer systems outside buildings - Part 6: Pumping installations; German version EN 752-6:1998 |
| DIN EN 752-7 | 建筑物外部排水和污水系統.第7部分:維護和使用 | Drain and sewer systems outside buildings - Part 7: Maintenance and operations; German version EN 752-7:1998 |
| DIN EN 805 | 供水.建筑物外部系統和元件要求 | Water supply - Requirements for systems and components outside buildings; German version EN 805:2000 |
| DIN EN 806-1 | 建筑物內部飲用水輸送設備規范.第1部分:總則; 德文版本 EN 806-1:2001 + A1:2001 | Specifications for installations inside buildings conveying water for human consumption - Part 1: General; German version EN 806-1:2001 + A1:2001 |
| DIN EN 806-2 | 建筑物內部人類生活用水輸送設備規范.第2部分:設計 | Specification for installations inside buildings conveying water for human consumption - Part 2: Design; German version EN 806-2:2005 |
| DIN EN 806-3 | 建筑物內部人類生活用水輸送設備規范.第3部分:管尺寸.簡化法 | Specifications for installations inside buildings conveying water for human consumption - Part 3: Pipe sizing - Simplified method; English version of DIN EN 806-3:2006-07 |
| DIN EN 822 | 建筑物熱絕緣產品.長度和寬度測定 | Thermal insulating products for building applications - Determination of length and width; German version EN 822:1994 |
| DIN EN 823 | 建筑物熱絕緣產品.厚度測定 | Thermal insulating products for building applications - Determination of thickness; German version EN 823:1994 |
| DIN EN 824 | 建筑物熱絕緣產品.垂直度測定 | Thermal insulating products for building applications - Determination of squareness; German version EN 824:1994 |
| DIN EN 825 | 建筑物熱絕緣產品.平直度測定 | Thermal insulating products for building applications - Determination of flatness; German version EN 825:1994 |
| DIN EN 826 | 建筑物絕熱產品.壓縮性測定 | Thermal insulating products for building applications - Determination of compression behaviour; German version EN 826:1996 |
| DIN EN 832 | 建筑物的熱性能.供熱用能量需求量的計算.住宅建筑（包括勘誤AC-2002) | Thermal performance of building - Calculation of energy use for heating - Residential buildings (includes Corrigenda AC:2002); German version EN 832:1998 + AC:2002 |
| DIN EN 877 | 建筑物排水用鑄鐵管道、管件及其接頭和附件.要求、試驗方法和質量保證 | Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance; German version EN 877:1999 |
| DIN EN 877/A1 | 建筑物排水用鑄鐵管道、管件、接頭和附件.要求、試驗方法和質量保證 | Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance; German version EN 877:1999/A1:2006 |
| DIN EN 988 | 鋅和鋅合金.建筑用軋制板料規范 | Zinc and zinc alloys - Specification for rolled flat products for building; German version EN 988:1996 |
| DIN EN ISO 10211-1 | 建筑結構中的熱橋.熱流和表面溫度.第1部分:一般計算方法 | Thermal bridges in building construction - Heat flows and surface temperatures - Part 1: General calculation methods (ISO 10211-1:1995); German version EN ISO 10211-1:1995 |
| DIN EN ISO 10211-2 | 建筑結構熱橋.熱流和表面溫度計算.第2部分:線性熱橋 | Thermal bridges in building construction - Calculation of heat flows and surface temperatures - Part 2: Linear thermal bridges (ISO 10211-2:2001); German version EN ISO 10211-2:2001 |
| DIN EN ISO 10456 | 建筑材料和制品.申報和設計熱值的測定程序 | Building materials and products - Procedures for determining declared and design thermal values (ISO 10456:1999); German version EN ISO 10456:1999 |
| DIN EN ISO 10563 | 房屋建筑.密封膠.質量和體積變化的測定 | Building construction - Sealants - Determination of change in mass and volume (ISO 10563:2005); German version EN ISO 10563:2005 |
| DIN EN ISO 10590 | 房屋建筑.密封膠.浸水后在保持延伸狀態下測定密封膠的拉伸性能 | Building construction - Sealants - Determination of tensile properties of sealants at maintained extension after immersion in water (ISO 10590:2005); German version EN ISO 10590:2005 |
| DIN EN ISO 10591 | 房屋建筑.密封膠.浸水后密封膠的粘結/粘合性能測定 | Building construction - Sealants - Determination of adhesion/cohesion properties of sealants after immersion in water (ISO 10591:2005); German version EN ISO 10591:2005 |
| DIN EN ISO 11091 | 建筑制圖.園林設計制圖實用規程 | Construction drawings - Landscape drawing practice (ISO 11091:1994); German version EN ISO 11091:1999 |
| DIN EN ISO 11431 | 房屋建筑.連接件.密封膠受熱、遇水和透過玻璃的人造光照射后粘合力測定 | Building construction - Jointing products - Determination of adhesion/cohesion properties of saelants after exposure to heat, water and artificial light through glass (ISO 11431:2002); German version EN ISO 11431:2002 |
| DIN EN ISO 11432 | 房屋建筑.密封膠.耐壓性測定 | Building construction - Sealants - Determination of resistance to compression (ISO 11432:2005); German version EN ISO 11432:2005 |
| DIN EN ISO 11600 | 房屋建筑.連接件.密封件的分類和要求 | Building construction - Jointing products - Classification and requirements for sealants (ISO 11600:2002); German version EN ISO 11600:2003 |
| DIN EN ISO 11654 | 聲學.建筑物聲音吸收.聲音吸收評定 | Acoustics - Sound absorbers for use in buildings - Rating of sound absorption (ISO 11654:1997); German version EN ISO 11654:1997 |
| DIN EN ISO 12241 | 建筑設備和工業裝置絕熱.計算規則 | Thermal insulation for building equipment and industrial installations - Calculation rules (ISO 12241:1998); German version EN ISO 12241:1998 |
| DIN EN ISO 12543-1 | 建筑物玻璃.復合玻璃和復合安全玻璃.第1部分:成份定義和說明 | Glass in building - Laminated glass and laminated safety glass - Part 1: Definitions and description of component parts (ISO 12543-1:1998); German version EN ISO 12543-1:1998 |
| DIN EN ISO 12543-2 | 建筑玻璃.夾層玻璃和夾層安全玻璃.第2部分:夾層安全玻璃 | Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO 12543-2:1998); German version EN ISO 12543-2:1998 + A1:2004 |
| DIN EN ISO 12543-3 | 建筑物玻璃.復合玻璃和復合安全玻璃.第3部分:復合玻璃 | Glass in building - Laminated glass and laminated safety glass - Part 3: Laminated glass (ISO 12543-3:1998); German version EN ISO 12543-3:1998 |
| DIN EN ISO 12543-4 | 建筑物玻璃.復合玻璃和復合安全玻璃.第4部分:耐受性檢驗方法 | Glass in building - Laminated glass and laminated safety glass - Part 4: Test methods for durability (ISO 12543-4:1998); German version EN ISO 12543-4:1998 |
| DIN EN ISO 12543-5 | 建筑物玻璃.復合玻璃和復合安全玻璃.第5部分:尺寸和邊角加工 | Glass in building - Laminated glass and laminated safety glass - Part 5: Dimensions and edge finishing (ISO 12543-5:1998); German version EN ISO 12543-5:1998 |
| DIN EN ISO 12543-6 | 建筑物玻璃.復合玻璃和復合安全玻璃.第6部分:外觀 | Glass in building - Laminated glass and laminated safety glass - Part 6: Appearance (ISO 12543-6:1998); German version EN ISO 12543-6:1998 |
| DIN EN ISO 12569 | 建筑物熱性能.建筑物中空氣變化測定.示蹤氣體稀釋法 | Thermal performance of buildings - Determination of air change in buildings - Tracer gas dilution method (ISO 12569:2000); German version EN ISO 12569:2000 |
| DIN EN ISO 12570 | 建筑材料和產品濕熱性能.高溫下干燥法測定含水量 | Hygrothermal performance of building materials and products - Determination of moisture content by drying at elevated temperature (ISO 12570:2000); German version EN ISO 12570:2000 |
| DIN EN ISO 12571 | 建筑材料和產品濕熱性能.吸濕性能測定 | Hygrothermal performance of building materials and products - Determination of hygroscopic sorption properties (ISO 12571:2000); German version EN ISO 12571:2000 |
| DIN EN ISO 12572 | 建筑材料和產品濕熱性能.水蒸汽傳輸特性測定 | Hygrothermal performance of building materials and products - Determination of water vapour transmission properties (ISO 12572:2001); German version EN ISO 12572:2001 |
| DIN EN ISO 13370 | 建筑物熱性能.經由地面的熱傳遞.計算方法 | Thermal performance of buildings - Heat transfer via the ground - Calculation methods (ISO 13370:1998); German version EN ISO 13370:1998 |
| DIN EN ISO 13567-2 | 技術產品文件管理.計算機輔助設計(CAD)用各層的編制和命名.第2部分:建筑工程文件管理用概念、格式和代碼 (I | Technical product documentation - Organization and naming of layers for CAD - Part 2: Concepts, format and codes used in construction documentation (ISO 13567-2:1998); German version EN ISO 13567-2:2002 |
| DIN EN ISO 13786 | 建筑物構件熱性能.動態熱特性.計算方法 | Thermal performance of building components - Dynamic thermal characteristics - Calculation methods (ISO 13786:1999); German version EN ISO 13786:1999 |
| DIN EN ISO 13787 | 建筑設備和工業裝置用熱絕緣產品.聲明的導熱系數的測定 | Thermal insulation products for building equipment and industrial installations - Determination of declared thermal conductivity (ISO 13787:2003); German version EN ISO 13787:2003 |
| DIN EN ISO 13788 | 建筑物構件和元件濕熱性能.避免嚴重表面潮濕和冷凝的內表面溫度.計算方法 | Hygrothermal performance of building components and building elements - Internal surface temperature to avoid critical surface humidity and interstitial condensation - Calculation methods (ISO 13788:2001); German version EN ISO 13788:2001 |
| DIN EN ISO 13789 | 建筑物熱性能.熱傳輸損耗率.計算方法 | Thermal performance of buildings - Transmission heat loss coefficient - Calculation method (ISO 13789:1999); German version EN ISO 13789:1999 |
| DIN EN ISO 13790 | 建筑物的熱性能.房間取暖用能量的計算 | Thermal performance of buildings - Calculation of energy use for space heating (ISO 13790:2004); German version EN ISO 13790:2004 |
| DIN EN ISO 13791 | 建筑物的熱性能.夏季無機械通風冷卻時房間內部溫度的計算.通用標準和確認程序 | Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - General criteria and validation procedures (ISO 13791:2004); German version EN ISO 13791:2004 |
| DIN EN ISO 13792 | 建筑物的熱性能.無機器制冷條件下夏季房間內溫度的計算.簡化法 | Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - Simplified method (ISO 13792:2005); German version EN ISO 13792:2005 |
| DIN EN ISO 13793 | 建筑物熱性能.避免霜凍的地基熱設計 | Thermal performance of buildings - Thermal design of foundations to avoid frost heave (ISO 13793:2001); German version EN ISO 13793:2001 |
| DIN EN ISO 140-1 | 聲學.建筑物和建筑構件的隔音測量.第1部分:抑制側向傳播的實驗室試驗裝置的要求 | Acoustics - Measurement of sound insulation in buildings and of building elements - Part 1: Requirements for laboratory test facilities with suppressed flanking transmission (ISO 140-1:1997 + AM 1:2004); German version EN ISO 140-1:1997 + A1:2004 |
| DIN EN ISO 140-11 | 聲學.建筑物和建筑構件的隔聲測量.第11部分:輕型標準樓板上地板覆蓋物傳遞沖擊聲音降低的實驗室測量 | Acoustics - Measurement of sound insulation in buildings and of building elements - Part 11: Laboratory measurements of the reduction of transmitted impact sound by floor coverings on lightweight reference floors (ISO 140-11:2005); German version EN ISO 140-11:2005 |
| DIN EN ISO 140-14 | 聲學.建筑物和建筑構件的隔音測量.第14部分:場地的特殊情況的指南 | Acoustics - Measurement of sound insulation in buildings and of building elements - Part 14: Guidelines for special situations in the field (ISO 140-14:2004); German version EN ISO 140-14:2004 |
| DIN EN ISO 140-16 | 聲學.建筑物和建筑物構件的隔音測量.第16部分:通過附加襯套對噪音減少索引改進的實驗室測量(ISO 140-16:200 | Acoustics - Measurement of sound insulation in buildings and of building elements - Part 16: Laboratory measurement of the sound reduction index improvement by additional lining (ISO 140-16:2006); English version of DIN EN ISO 140-16:2006-11 |
| DIN EN ISO 140-18 | 聲學.建筑物和建筑構件的隔聲測量.第18部分:建筑物構件隔雨聲實驗室測量 | Acoustics - Measurement of sound insulation in buildings and of building elements - Part 18: Laboratory measurement of sound generated by rainfall on building elements (ISO 140-18:2006); English version of DIN EN ISO 140-18:2007-02 |
| DIN EN ISO 140-3 | 聲學.建筑物和建筑構件的隔聲測量.第3部分:建筑物構件空氣聲隔絕的實驗室測量 | Acoustics - Measurement of sound insulation in buildings and of building elements - Part 3: Laboratory measurements of airborne sound insulation of building elements (ISO 140-3:1995 + AM 1:2004); German version EN 20140-3:1995 + A1:2004 |
| DIN EN ISO 140-4 | 聲學.建筑物和建筑構件隔音性能測量.第4部分:房間氣載聲音隔絕現場測量 | Acoustics - Measurement of sound insulation in buildings and of building elements - Part 4: Field measurement of airborne sound insulation between rooms (ISO 140-4:1998); German version EN ISO 140-4:1998 |
| DIN EN ISO 140-5 | 聲學.建筑物和建筑構件隔音性能測量.第5部分:房屋正面和正面構件氣載聲隔絕測量 | Acoustics - Measurement of sound insulation in buildings and of building elements - Part 5: Field measurement of airborne sound insulation of facade elements and facades (ISO 140-5:1998); German version EN ISO 140-5:1998 |
| DIN EN ISO 140-6 | 聲學.建筑物和建筑構件隔音性能測量.第6部分:樓層板蹬踏聲隔絕實驗室測量 | Acoustics - Measurement of sound insulation in buildings and of building elements - Part 6: Laboratory measurements of impact sound insulation of floors (ISO 140-6:1998); German version EN ISO 140-6:1998 |
| DIN EN ISO 140-7 | 聲學.建筑物和建筑構件隔音性能測量.第7部分:建筑物樓層板蹬踏聲隔絕測量 | Acoustics - Measurement of sound insulation in buildings and of building elements - Part 7: Field measurements of impact sound insulation of floors (ISO 140-7:1998); German version EN ISO 140-7:1998 |
| DIN EN ISO 140-8 | 聲學.建筑物及建筑構件隔音性能測量.第8部分:標準負荷地板地板鋪覆物降低沖擊聲效果的實驗室測量 | Acoustics - Measurement of sound insulation in buildings and of building elements - Part 8: Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor (ISO 140-8:1997); German version EN ISO 140-8:1997 |
| DIN EN ISO 14438 | 建筑物用玻璃.能量平衡值的測定.計算方法 (ISO 14438:2002); 德文版本 EN ISO 14438:2002 | Glass in building - Determination of energy balance value - Calculation method (ISO 14438:2002); German version EN ISO 14438:2002 |
| DIN EN ISO 14683 | 建筑物熱橋.線性熱穿透系數.簡化方法和缺陷值 | Thermal bridges in building construction - Linear thermal transmittance - Simplified methods and default values (ISO 14683:1999); German version EN ISO 14683:1999 |
| DIN EN ISO 15148 | 建筑材料和產品溫濕吸收性.局部浸濕法測定吸水系數 | Hygrothermal performance of building materials and products - Determination of water absorption coefficient by partial immersion (ISO 15148:2002); German version EN ISO 15148:2002 |
| DIN EN ISO 15186-1 | 聲學.用聲強作建筑物和建筑構件的隔聲測量.第1部分:實驗室測量 | Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 1: Laboratory measurements (ISO 15186-1:2000); German version EN ISO 15186-1:2003 |
| DIN EN ISO 15748-1 | 船舶和航海技術.船舶和海上建筑物飲用水的供應.第1部分:規劃和設計 (ISO 15748-1:2002); 德文版本 EN ISO 1 | Ships and marine technology - Potable water supply on ships and marine structures - Part 1: Planning and design (ISO 15748-1:2002); German version EN ISO 15748-1:2002 |
| DIN EN ISO 15748-2 | 船舶和航海技術.船舶和海上建筑物飲用水的供應.第2部分:計算方法 (ISO 15748-2:2002); 德文版本 EN ISO 157 | Ships and marine technology - Potable water supply on ships and marine structures - Part 2: Method of calculation (ISO 15748-2:2002); German version EN ISO 15748-2:2002 |
| DIN EN ISO 15749-1 | 船舶和海上技術.船舶和海上建筑物的排水系統.第1部分:衛生排水系統設計 | Ships and marine technology - Drainage systems on ships and marine structures - Part 1: Sanitary drainage-system design (ISO 15749-1:2004); German version EN ISO 15749-1:2004 |
| DIN EN ISO 15749-2 | 船舶和海上技術.船舶和海上建筑物的排水系統.第2部分:重力系統用衛生排水和排水管道 | Ships and marine technology - Drainage systems on ships and marine structures - Part 2: Sanitary drainage, drain piping for gravity systems (ISO 15749-2:2004); German version EN ISO 15749-2:2004 |
| DIN EN ISO 15749-3 | 船舶和海上技術.船舶和海上建筑物排水系統.第3部分:真空系統用衛生排水和排水管道 | Ships and marine technology - Drainage systems on ships and marine structures - Part 3: Sanitary drainage, drain piping for vacuum systems (ISO 15749-3:2004); German version EN ISO 15749-3:2004 |
| DIN EN ISO 15749-4 | 船舶和海上技術.船舶和海上建筑物的排水系統.第4部分:衛生排水和污物排出管 | Ships and marine technology - Drainage systems on ships and marine structures - Part 4: Sanitary drainage, sewage disposal pipes (ISO 15749-4:2004); German version EN ISO 15749-4:2004 |
| DIN EN ISO 15749-5 | 船舶和海上技術.船舶和海上建筑物的排水系統.第5部分:甲板、貨艙和游泳池的排水 | Ships and marine technology - Drainage systems on ships and marine structures - Part 5: Drainage of decks, cargo spaces and swimming pools (ISO 15749-5:2004); German version EN ISO 15749-5:2004 |
| DIN EN ISO 15927-1 | 建筑物的濕熱性能.氣象數據的計算與顯示.第1部分:單一氣象元素的月均值和年均值 | Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 1: Monthly and annual means of single meteorological elements (ISO 15927-1:2003); German version EN ISO 15927-1:2003 |
| DIN EN ISO 15927-4 | 建筑物的溫濕性能.氣候數據的計算和表示.第4部分:取暖和制冷年使用能量評定用小時數據 | Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 4: Hourly data for assessing the annual energy use for heating and cooling (ISO 15927-4:2005); German version EN ISO 15927-4:2005 |
| DIN EN ISO 15927-5 | 建筑物的溫濕性能.氣候數據的計算和表示.第5部分:空間加熱用設計熱負載用數據 | Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 5: Data for design heat load for space heating (ISO 15927-5:2004); German version EN ISO 15927-5:2004 |
| DIN EN ISO 15927-6 | 建筑的溫濕性能.氣候數據的計算和表示.第6部分:積聚的溫差(戶外每日平均溫度的單位) | Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 6: Accumulated temperature differences (degree-days) (ISO 15927-6:2007); German version EN ISO 15927-6:2007 |
| DIN EN ISO 16000-10 | 室內空氣.第9部分:建筑產品和家具釋放揮發性有機化合物的測定.釋放試驗容器法 | Indoor air - Part 10: Determination of the emission of volatile organic compounds from building products and furnishing - Emission test cell method (ISO 16000-10:2006); English version of DIN EN ISO 16000-10:2006-06 |
| DIN EN ISO 16000-11 | 室內空氣.第11部分:建筑產品和家具釋放揮發性有機化合物的測定.取樣、樣品儲藏和試驗樣品制備 | Indoor air - Part 11: Determination of the emission of volatile organic compounds from building products and furnishing - Sampling, storage of samples and preparation of test specimens (ISO 16000-11:2006); English version of DIN EN ISO 16000-11:2006-06 |
| DIN EN ISO 16000-9 | 室內空氣.第9部分:建筑產品和家具釋放揮發性有機化合物的測定.釋放試驗室法 | Indoor air - Part 9: Determination of the emission of volatile organic compounds from building products and furnishing - Emission test chamber method (ISO 16000-9:2006); English version of DIN EN ISO 16000-9:2006-06 |
| DIN EN ISO 16032 | 聲學.建筑物服務設備的聲壓級測量.工程法 | Acoustics - Measurement of sound pressure level from service equipment in buildings - Engineering method (ISO 16032:2004); German version EN ISO 16032:2004 |
| DIN EN ISO 16484-2 | 建筑物自動化和控制系統.第2部分:硬件 | Building automation and control systems (BACS) - Part 2: Hardware (ISO 16484-2:2004); German version EN ISO 16484-2:2004 |
| DIN EN ISO 16484-3 | 建筑自動化和控制系統(BACS).第3部分:功能 | Building automation and control systems (BACS) - Part 3: Functions (ISO 16484-3:2005); German version EN ISO 16484-3:2005 |
| DIN EN ISO 16484-5 | 建筑物自動化和控制系統.第5部分:數據通信協議 | Building automation and control systems - Part 5: Data communication protocol (ISO 16484-5:2003); English version EN ISO 16484-5:2003 |
| DIN EN ISO 16484-6 | 建筑物自動控制系統.第6部分:數據通信.合格檢驗(ISO 16484-6-2005) | Building automation and control systems - Part 6: Data communication - Conformance testing (ISO 16484-6:2005); English version EN ISO 16484-6:2005 |
| DIN EN ISO 18233 | 聲學.建筑物和房間聲學新測量方法的應用(ISO 18233-2006) | Acoustics - Application of new measurement methods in building and room acoustics (ISO 18233:2006) English version of DIN EN ISO 18233:2006-08 |
| DIN EN ISO 19432 | 建筑施工機械和設備.便攜、手持、內燃機引擎驅動的切斷機.安全要求和試驗(ISO 19432:2006) | Building construction machinery and equipment - Portable, hand-held internal combustion engine driven cut-off machines - Safety requirements and testing (ISO 19432:2006); English version of DIN EN ISO 19432:2006-11 |
| DIN EN ISO 19900 | 石油和天然氣工業.近海建筑物的一般要求 | Petroleum and natural gas industries - General requirements for offshore structures (ISO 19900:2002); English version EN ISO 19900:2002 |
| DIN EN ISO 19901-1 | 石油和天然氣工業.海上建筑物的特殊要求.第1部分:Metocean設計和運行研究(ISO 19901-1-2005).英文版本EN IS | Petroleum and natural gas industries - Specific requirements for offshore structures - Part 1: Metocean design and operating considerations (ISO 19901-1:2005); English version EN ISO 19901-1:2005 |
| DIN EN ISO 19901-2 | 石油和天然氣工業.近海建筑物的特殊要求.第2部分:地震設計規程和標準 | Petroleum and natural gas industries - Specific requirements for offshore structures - Part 2: Seismic design procedures and criteria (ISO 19901-2:2004); English version EN ISO 19901-2:2004 |
| DIN EN ISO 19901-4 | 石油和天然氣工業.近海建筑物的特殊要求.第4部分:土工和地基設計考慮 | Petroleum and natural gas industries - Specific requirements for offshore structures - Part 4: Geotechnical and foundation design considerations (ISO 19901-4:2003); English version EN ISO 19901-4:2003 |
| DIN EN ISO 19901-5 | 石油和天然氣工業.近海建筑物的特殊要求.第5部分:設計和施工過程中的重量控制 | Petroleum and natural gas industries - Specific requirements for offshore structures - Part 5: Weight control during engineering and construction (ISO 19901-5:2003); English version EN ISO 19901-5:2003 |
| DIN EN ISO 19901-7 | 石油和天然氣工業.海上建筑物的特殊要求.第7部分:浮動式海上建筑物和移動式海上設備的定位系統(ISO 19901-7 | Petroleum and natural gas industries - Specific requirements for offshore structures - Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units (ISO 19901-7:2005); English version EN ISO 19901-7:2005 |
| DIN EN ISO 3766 | 建筑工程制圖.鋼筋混凝土的簡化畫法 | Construction drawings - Simplified representation of concrete reinforcement (ISO 3766:2003); German version EN ISO 3766:2003 |
| DIN EN ISO 4157-1 | 建筑圖樣.命名制度.第1部分:建筑物和建筑物組成部分 | Construction drawings - Designation systems - Part 1: Buildings and parts of buildings (ISO 4157-1:1998); German version EN ISO 4257-1:1998 |
| DIN EN ISO 4157-2 | 建筑圖樣.命名制度.第2部分:房間名稱與號碼 | Construction drawings - Designation systems - Part 2: Room names and numbers (ISO 4157-2:1998); German version EN ISO 4157-2:1998 |
| DIN EN ISO 4157-3 | 建筑圖樣.命名制度.第3部分:房間標識 | Construction drawings - Designation systems - Part 3: Room identifiers (ISO 4157-3:1998); German version EN ISO 4157-3:1998 |
| DIN EN ISO 6946 | 建筑部件與構件.熱電阻和傳熱系數.計算方法 | Building components and building elements - Thermal resistance and thermal transmittance - Calculation method (ISO 6946:1996 + Amd 1:2003) (includes Amendment A1:2003); German version EN ISO 6946:1996 + A1:2003 |
| DIN EN ISO 717-1 | 聲學.建筑物和建筑物構件的隔音參數.第1部分:氣載音隔絕(ISO 717-1-1996 + 修改件1:2006) | Acoustics - Rating of sound insulation in buildings and of building elements - Part 1: Airborne sound insulation (ISO 717-1:1996 + AM1:2006); English version of DIN EN ISO 717-1:1996 + A1:2006-11 |
| DIN EN ISO 717-2 | 聲學.建筑物和建筑物構件隔音評級.第2部分:沖擊聲隔絕(ISO 717-2-1996 + 修改件1:2006) | Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 717-2:1996 + AM1:2006); English version of DIN EN ISO 717-2:1996 + A1:2006-11 |
| DIN EN ISO 7389 | 房屋建筑.連接件.密封件的回彈性測定 | Building construction - Jointing products - Determination of elastic recovery of sealants (ISO 7389:2002); German version EN ISO 7389:2003 |
| DIN EN ISO 7390 | 房屋建筑.連接件.密封件的耐流動性測定 | Building construction - Jointing products - Determination of resistance to flow of sealants (ISO 7390:2002); German version EN ISO 7390:2003 |
| DIN EN ISO 8339 | 房屋建筑.密封件.拉伸性能(拉至斷裂)的測定 | Building construction - Sealants - Determination of tensile properties (Extension to break) (ISO 8339:2005); German version EN ISO 8339:2005 |
| DIN EN ISO 8340 | 房屋建筑.密封件.保持延伸狀態時拉伸性能的測定 | Building construction - Sealants - Determination of tensile properties at maintained extension (ISO 8340:2005); German version EN ISO 8340:2005 |
| DIN EN ISO 9046 | 房屋建筑.連接產品.恒溫下密封膠的粘附/粘合性能的測定 | Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at constant temperature (ISO 9046:2002); German version EN ISO 9046:2004 |
| DIN EN ISO 9047 | 房屋建筑.連接件.變溫下密封膠粘合性能的測定 | Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at variable temperatures (ISO 9047:2001); German version EN ISO 9047:2003 |
| DIN ISO 10209-4 | 技術產品文件.詞匯.第4部分:與建筑工程文件有關的術語 | Technical product documentation - Vocabulary - Part 4: Terms relating to construction documentation (ISO 10209-4:1999) |
| DIN ISO 128-23 | 技術制圖.畫法的一般原理.第23部分:建筑工程制圖線 | Technical drawings - General principles of presentation - Part 23: Lines on construction drawings (ISO 128-23:1999) |
| DIN ISO 21537-2 | 超磨料切割砂輪用夾具法蘭.第2部分:建筑和施工 | Clamping flanges for superabrasive cutting-off wheels - Part 2: Building and construction (ISO 21537-2:2004) |
| DIN ISO 21538 | 超磨料切割砂輪用坯件.安裝和固定孔.建筑施工和土木工程 | Blanks for superabrasive cutting-off wheels - Mounting and fixing bores - Building construction and civil engineering (ISO 21538:2004) |
| DIN ISO 3828 | 造船和海上建筑結構.甲板機械.詞匯 | Shipbuilding and marine structures; deck machinery; vocabulary; identical with ISO 3828:1984 |
| DIN ISO 4172 | 建筑工程圖紙.預制結構件的裝配圖 | Construction drawings; drawings for the assembly of prefabricated structures; identical with ISO 4172:1991 |
| DIN ISO 6105-1 | 超級研磨切割砂輪用坯件.第1部分:建筑物和土木工程用人工切割 | Blanks for superabrasive cutting-off wheels - Part 1: Manually guided cutting-off in building and civil engineering (ISO 6105-1:2004) |
| DIN ISO 6105-2 | 超級研磨切割砂輪用坯件.第2部分:建筑物和土木工程用手持式切割 | Blanks for superabrasive cutting-off wheels - Part 2: Hand-held cutting-off in building and civil engineering (ISO 6105-2:2004) |
| DIN ISO 614 | 造船和海上建筑物.矩形窗和側舷窗用鋼化安全玻璃板.強度無損檢驗的沖壓方法 | Shipbuilding and marine structures; toughened safety glass panes for rectangular windows and side scuttles; punch method of non-destructive strength testing; identical with ISO 614:1989 |
| DIN ISO 6284 | 技術圖樣.建筑圖樣.極限尺寸標注 | Construction drawings - Indication of limit deviations (ISO 6284:1996) |
| DIN ISO 7437 | 建筑圖樣.預制結構件生產圖樣一般規則 | Construction drawings; general rules for execution of production drawings for prefabricated structural components; identical with ISO 7437:1990 |
| DIN ISO 8560 | 建筑圖紙.建筑制圖.模塊尺寸、管線和柵架的表示法 | Construction drawings; representation of modular sizes, lines and grids; identical with ISO 8560:1986 |
| DIN ISO 9242 | 夾扭鉗和剪切鉗.建筑工人鉗.尺寸和試驗值; 等同采用 ISO 9242:1988 | Pliers and nippers - Construction worker's pincers - Dimensions and test values; identical with ISO 9242:1988 |
| DIN V 18004 | 施工作業中建筑產品的使用.符合DIN V 20000-103和DIN V 20000-104集料的試驗方法 | Use of building products in construction works - Test methods for aggregates according to DIN V 20000-103 and DIN V 20000-104 |
| DIN V 18160-1 Bb.2 | 煙囪.第1部分:設計和性能.粘土/陶瓷煙道襯塊依照DIN EN 1457的國家補充.常規建筑物煙囪用分類體系的規定 | Chimneys - Part 1: Design and performance; National supplement for the use of clay/ceramik flue liners according DIN EN 1457, allocation of the classification system for custom built chimneys |
| DIN V 18599-1 | 建筑物能效.計算加熱、冷卻、通風、家用熱水和照明用凈能、最終和初始能量.第1部分:通用平衡程序、術語、定 | Energy efficiency of buildings - Calculation of the net, final and primary energy demand for heating, cooling, ventilation, domestic hot water and lighting - Part 1: General balancing procedures, terms and definitions, zoning and evaluation of energy sources |
| DIN V 18599-10 | 建筑物能效.計算加熱、冷卻、通風、家用熱水和照明用凈能、最終和初始能量.第10部分:使用邊界條件和環境數 | Energy efficiency of buildings - Calculation of the net, final and primary energy demand for heating, cooling, ventilation, domestic hot water and lighting - Part 10: Boundary conditions of use, climatic data |
| DIN V 18599-2 | 建筑物能效.計算加熱、冷卻、通風、家用熱水和照明用凈能、最終和初始能量.第2部分:建筑物區域加熱和制冷的 | Energy efficiency of buildings - Calculation of the net, final and primary energy demand for heating, cooling, ventilation, domestic hot water and lighting - Part 2: Net energy demand for heating and cooling of building zones |
| DIN V 18599-3 | 建筑物能效.計算加熱、冷卻、通風、家用熱水和照明用凈能、最終和初始能量.第3部分:空調用凈能 | Energy efficiency of buildings - Calculation of the net, final and primary energy demand for heating, cooling, ventilation, domestic hot water and lighting - Part 3: Net energy demand for air conditioning |
| DIN V 18599-4 | 建筑物能效.計算加熱、冷卻、通風、家用熱水和照明用凈能、最終和初始能量.第4部分:照明的凈能和最終能量要 | Energy efficiency of buildings - Calculation of the net, final and primary energy demand for heating, cooling, ventilation, domestic hot water and lighting - Part 4: Net and final energy demand for lighting |
| DIN V 18599-5 | 建筑物能效.計算加熱、冷卻、通風、家用熱水和照明用凈能、最終和初始能量.第5部分:加熱系統最終能量要求 | Energy efficiency of buildings - Calculation of the net, final and primary energy demand for heating, cooling, ventilation, domestic hot water and lighting - Part 5: Final energy demand of heating systems |
| DIN V 18599-6 | 建筑物能效.計算加熱、冷卻、通風、家用熱水和照明用凈能、最終和初始能量.第6部分:住宅建筑通風系統和空氣 | Energy efficiency of buildings - Calculation of the net, final and primary energy demand for heating, cooling, ventilation, domestic hot water and lighting - Part 6: Final energy demand of ventilation systems and air heating systems for residential buildings |
| DIN V 18599-7 | 建筑物能效.計算加熱、冷卻、通風、家用熱水和照明用凈能、最終和初始能量.第7部分:非住宅建筑用空氣處理和 | Energy efficiency of buildings - Calculation of the net, final and primary energy demand for heating, cooling, ventilation, domestic hot water and lighting - Part 7: Final energy demand of air-handling and air-conditioning systems for non-residential buildings |
| DIN V 18599-8 | 建筑物能效.計算加熱、冷卻、通風、家用熱水和照明用凈能、最終和初始能量.第8部分:家用熱水系統凈能和最終 | Energy efficiency of buildings - Calculation of the net, final and primary energy demand for heating, cooling, ventilation, domestic hot water and lighting - Part 8: Net and final energy demand of domestic hot water systems |
| DIN V 18599-9 | 建筑物能效.計算加熱、冷卻、通風、家用熱水和照明用凈能、最終和初始能量.第9部分:熱電聯產最終和最初能量 | Energy efficiency of buildings - Calculation of the net, final and primary energy demand for heating, cooling, ventilation, domestic hot water and lighting - Part 9: Final and primary energy demand of combined heat and power generation plants |
| DIN V 20000-1 | 結構物中建筑產品的應用.第1部分:木基板材 | Application of construction products in structures - Part 1: Wood based panels |
| DIN V 20000-100 | 建筑物用建筑產品的應用.第100部分:符合DIN EN 934-2:2002-02的混凝土混合物 | Application of building products in structures - Part 100: Concrete admixtures according DIN EN 934-2:2002-02 |
| DIN V 20000-101 | 建筑物用建筑產品的應用.第101部分:符合DIN EN 934-2:2002-02的預應力鋼筋束用混合物 | Application of building products in structures - Part 101: Admixtures for grout for prestressing tendons according to DIN EN 934-4:2002-02 |
| DIN V 20000-102 | 施工作業中建筑產品的使用.第102部分:符合DIN EN 13383-1-2002的集料 | Use of building products in construction works - Part 102: Aggregates according to DIN EN 13383-1:2002-08 |
| DIN V 20000-103 | 施工作業中建筑產品的使用.第103部分:符合DIN EN 12620-2003的集料 | Use of building products in construction works - Part 103: Aggregates according to DIN EN 12620:2003-04 |
| DIN V 20000-104 | 施工作業中建筑產品的使用.第104部分:符合DIN EN 13055-1:2002-08的輕質集料 | Use of building products in construction works - Part 104: Lightweight aggregates according to DIN EN 13055-1:2002-08 |
| DIN V 20000-105 | 建筑工程中建筑產品的使用.第105部分:符合DIN EN 13450-2003的集料 | Use of building products in construction works - Part 105: Aggregates according to DIN EN 13450:2003-06 |
| DIN V 20000-120 | 建筑物中建筑產品的應用.第120部分:DIN EN 13369-2004的應用原則 | Application of building products in structures - Part 120: Application rules for DIN EN 13369:2004-09 |
| DIN V 20000-123 | 施工中用建筑產品.第123部分:符合DIN EN 13224-2004-11的加筋地板塊的使用規則 | Application of building products in structures - Part 123: Rules for the application of ribbed floor elements according to DIN EN 13224:2004-11 |
| DIN V 20000-124 | 施工中用建筑產品.第124部分:符合DIN EN 13225-2004的線性建筑部件的使用規則 | Application of building products in structures - Part 124: Rules for the application of linear structural elements according to DIN EN 13225:2004-12 |
| DIN V 20000-125 | 施工中用建筑產品.第125部分:符合DIN EN 13978-1-2005的水泥預制板車庫使用規則 | Application of building products in structures - Part 125: Rules for the application of precast concrete garages according to DIN EN 13978-1:2005-07 |
| DIN V 20000-2 Berichtigung 1 | 結構中建筑產品的應用.第2部分:預制的木材模板梁.技術勘誤到DIN V 20000-2:2006-07 | Application of construction products in structures - Part 2: Prefabricated timber formwork beams, Corrigenda to DIN V 20000-2:2006-07 |
| DIN V 20000-2 Berichtigung 2 | 結構中建筑產品應用.第2部分:預制的木材模板梁.對DIN V 20000-2-2006技術勘誤 | Application of construction products in structures - Part 2: Prefabricated timber formwork beams, Corrigenda to DIN V 20000-2:2006-07 |
| DIN V 20000-2 | 結構中建筑產品的應用.第2部分:預制的木材模板梁 | Application of construction products in structures - Part 2: Prefabricated timber formwork beams |
| DIN V 20000-201 | 建筑工程中建筑產品的使用.第201部分:根據歐洲標準的屋頂防水層用防水軟板的適配標準 | Use of building products in construction works - Part 201: Adaption standard for flexible sheets for waterproofing according to European standards for the use as waterproofing of roofs |
| DIN V 20000-401 | 結構物中建筑產品的應用.第401部分:符合DIN EN 771-1-2005的粘土砌塊的應用規則 | Application of building products in structures - Part 401: Rules for the application of clay masonry units according to DIN EN 771-1:2005-05 |
| DIN V 20000-402 | 結構物中建筑產品的應用.第402部分:符合DIN EN 771-2-2005的硅酸鈣砌塊的應用規則 | Application of building products in structures - Part 402: Rules for the application of calcium silicate masonry units according to DIN EN 771-2:2005-05 |
| DIN V 20000-403 | 結構物中建筑產品的應用.第403部分:符合DIN EN 771-3-2005的集料混凝土砌塊的應用規則 | Application of building products in structures - Part 403: Rules for the application of aggregate concrete masonry units according to DIN EN 771-3:2005-05 |
| DIN V 20000-404 | 建筑物內建筑產品的應用.第404:依照DIN EN 771-4-2005-05高壓蒸養加氣混凝土砌塊的應用規則 | Application of building products in structures - Part 404: Rules for the application of autoclaved aerated concrete masonry units according to DIN EN 771-4:2005-05 |
| DIN V 20000-412 | 結構中建筑產品的應用.第412部分:符合DIN EN 998-2-2003的圬工灰漿的應用規則 | Application of building products in structures - Part 412: Rules for the application of masonry mortar according DIN EN 998-2:2003-09 |
| DIN V 4085-100 Bb.1 | 建筑地基.地壓計算.第100部分:根據局部安全系數概念分析.計算實例 | Soil - Calculation of earth pressure - Part 100: Analysis in accordance with the partial safety factor concept; calculation examples |
| DIN V 4102-21 | 建筑物材料和建筑物組件的防火性能.第21部分:通風管道防火性能的評估 | Fire behaviour of building materials and building components - Part 21: Assessment of the performance of fire resistant air ducts |
| DIN V 4108-10 | 建筑物中隔熱和節能.熱絕緣材料的應用要求.第10部分:工廠制產品 | Thermal insulation and energy economy in buildings - Application-related requirements for thermal insulation materials - Part 10: Factory made products |
| DIN V 4108-4 | 建筑物中隔熱和節能.第4部分:溫濕設計值 | Thermal insulation and energy economy in buildings - Part 4: Hygrothermal design values |
| DIN V 4108-6 | 建筑物熱防護和節能.第6部分:年需熱能計算 | Thermal protection and energy economy in buildings - Part 6: Calculation of annual heat and energy use |
| DIN V 4701-10 Bb.1 | 建筑物中加熱和通風系統能效.第10部分:家用熱水源和通風設備.補充件1:系統實例 | Energy efficiency of heating and ventilation systems in buildings - Part 10: Heating, domestic hot water supply, ventilation; Supplement 1: Examples of systems |
| DIN V 4701-10 | 建筑物加熱和通風系統的能效.第10部分:供暖、家用熱水供應、通風 | Energy efficiency of heating and ventilation systems in buildings - Part 10: Heating, domestic hot water supply, ventilation |
| DIN V 4701-10/A1 | 建筑物中加熱和通風系統能效.第10部分:家庭熱水加熱源和通風 | Energy Efficiency of Heating and Ventilation Systems in Buildings - Part 10: Heating, Domestic Hot Water Supply, Ventilation |
| DIN V 4701-12 | 現有建筑物中加熱和通風裝置的能量評價.第12部分:熱和家用熱水的產生 | Energetic evaluation of heating and ventilation systems in existing buildings - Part 12: Heat generation and domestic hot water generation |
| DIN V ENV 1046 | 塑料管道系統.輸送水或污水用建筑結構外部系統.地上和地下安裝慣例 | Plastics piping and ducting systems - Systems outside building structures for the conveyance of water or sewage - Practices for installation above and below ground; German version ENV 1046:2001 |
| DIN V ENV 1090-1 | 鋼結構的施工.總規則和建筑物的規則 | Execution of steel structures - Part 1: General rules and rules for buildings; German version ENV 1090-1:1996 |
| DIN V ENV 12108 | 塑料管道系統.建筑物內人用冷熱水壓力管道安裝指南 | Plastics piping systems - Guidance for the installation inside buildings of pressure piping systems for hot and cold water intended for human consumption; German version ENV 12108:2001 |
| DIN V ENV 12977-1 | 太陽能供熱系統和部件.定制建筑系統.第1部分:一般要求 | Thermal solar systems and components - Custom built systems - Part 1: General requirements; German version ENV 12977-1:2001 |
| DIN V ENV 12977-2 | 太陽能供熱系統和部件.定制建筑系統.第2部分:試驗方法 | Thermal solar systems and components - Custom built systems - Part 2: Test methods; German version ENV 12977-2:2001 |
| DIN V ENV 12977-3 | 太陽能供熱系統和部件.定制建筑系統.第3部分:太陽能加熱系統存儲性能 | Thermal solar systems and components - Custom built systems - Part 3: Performance characterisation of stores for solar heating systems; German version ENV 12977-3:2001 |
| DIN V ENV 1329-2 | 建筑物內渣土和廢物傾倒用塑料管道系統(低和高溫).未增塑聚氯乙烯.第2部分:合格評定導則 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity; German version ENV 1329-2:2001 |
| DIN V ENV 13801 | 建筑結構內(低溫和高溫)渣土和廢棄物排放塑料管道系統.熱塑管.推薦安裝慣例 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Thermoplastics - Recommended practice for installation; German version ENV 13801:2001 |
| DIN V ENV 1451-2 | 建筑物內渣土和廢物傾倒用塑料管道系統(低溫和高溫).聚丙烯.第2部分:合格評定導則 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity; German version ENV 1451-2:2001 |
| DIN V ENV 1453-2 | 清除建筑物內部塵土和廢物(低溫和高溫)用帶結構管壁的塑料管道系統.未增塑聚氯乙烯(PVC-U).第2部分:合格評 | Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity; German version ENV 1453-2:2000 |
| DIN V ENV 1455-2 | 建筑結構中(低溫和高溫)渣土和廢物排放用塑料管道系統.丙烯腈-丁二烯-苯乙烯共聚物(ABS).第2部分:合格評定 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 2: Guidance for the assessment of conformity; German version ENV 1455-2:2001 |
| DIN V ENV 1519-2 | 建筑結構中(低溫和高溫)渣土和廢物排放用塑料管道系統.聚乙烯(PE).第2部分:合格評定指南 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 2: Guidance for the assessment of conformity; German version ENV 1519-2:2001 |
| DIN V ENV 1565-2 | 建筑結構中(低溫和高溫)渣土和廢物排放用塑料管道系統.苯乙烯共聚體混合物(SAN+PVC).第2部分:合格評定指南 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Styrene copolymer blends (SAN+PVC) - Part 2: Guidance for the assessment of conformity; German version ENV 1565-2:2001 |
| DIN V ENV 1566-2 | 建筑結構中(低溫和高溫)渣土和廢物排放用塑料管道系統.氯化聚氯乙烯(PVC-C).第2部分:合格評定指南 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly (vinyl chloride) (PVC-C) - Part 2: Guidance for the assessment of conformity; German version ENV 1566-2:2001 |
| DIN V ENV 1999-1-1 | 歐洲規范9:鋁結構設計.第1-1部分:一般規則.一般規則和建筑物規則 | Eurocode 9: Design of aluminium structures - Part 1-1: General rules; general rules and rules for buildings; German version ENV 1999-1-1:1998 |
| DIN V VDE V 0100-534 | 建筑物的電氣設施.第534部分:設備選擇和安裝.過電壓保護裝置 | Electrical installations of buildings - Part 534: Selection and erection of equipment - Devices for protection against overvoltages |
| DIN V VDE V 0800-2-548 | 建筑物的電氣設施.第5部分:電氣設備的選擇和安裝.第548節:信息技術設施用接地措施和等電位連接 | Electrical installations of buildings - Part 5: Selection and erection of electrical equipment - Section 548: Earthing arrangements and equipotential bonding for information technology installations (IEC 60364-5-548:1996) |
| DIN V VDE V 0826-1 | 監視系統.第1部分:住宅建筑、公寓和相似用途房屋中使用的危害警告系統.規劃、安裝、操作和維修 | Surveillance systems - Part 1: Hazard warning system for use in residential buildings, apartments and rooms with similar purposes - Planning, installation, operation and maintenance |
| DIN VDE 0100-442 | 建筑物電氣設備.第4部分:安全保護.第44章:過壓保護.第442節:高壓系統和接地間耐故障低壓裝置保護 | Electrical installations of buildings - Part 4: Protection for safety; Chapter 44: Protection against overvoltages; Section 442: Protection of low voltage installations against faults between high-voltage systems and earth; German version HD 384.4.442 S1:1997 |
| DIN VDE 0100-444 | 建筑物的電氣裝置.第4部分:防護措施.第44章:過電壓的防護.第444節:建筑物電氣裝置電磁干擾的防護 | Electrical installations of buildings - Part 4: Protection for safety; chapter 44: Protection against overvoltages; section 444: Protection against electromagnetic interferences (EMI) in installations of buildings (IEC 60364-4-444-1996, modified); German version CENELEC R064-004:1999 |
| DIN VDE 0100-520 | 建筑物電氣裝置.第5部分:電氣設備的選擇和安裝.第52章:布線系統 | Electrical installations of buildings - Part 5: Selection and erection of electrical equipment; Chapter 52: Wiring systems (IEC 60364-5-52:1993, modified); German version HD 384.5.52 S1:1995 + A1:1998 |
| DIN VDE 0100-537 | 建筑物的電氣設施.第5部分:電氣設備的選擇和安裝.第53章:開關設備和控制設備.第537節:隔離和開關電器 | Electrical installations of buildings - Part 5: Selection and erection of electrical equipment; Chapter 53: Switchgear and controlgear; Section 537: Devices for isolation and switching (IEC 60364-5-537:1981 + A1:1989, modified); German version HD 384.5.537 S2:1998 |
| DIN VDE 0100-551 | 建筑物的電氣設施.第5部分:電氣設備的選擇和安裝.第55章:其它設備.第551節:低壓發電機組 | Electrical installations of buildings - Part 5: Selection and erection of electrical equipment; Chapter 55: Other equipment; Section 551: Low-voltage generating sets (IEC 60364-5-551:1994); German version HD 384.5.551 S1:1997 |
| DIN VDE 0100-704 | 低壓電氣裝置.第7-704部分:專用裝置或場所的要求.建筑和拆除場所裝置 | Low-voltage electrical installations - Part 7-704: Requirements for special installations or locations - Construction and demolition site installations (IEC 60364-7-704:2005, modified); German implementation HD 60364-7-704:2007 + Cor. 1:2007 |
| DIN VDE 0100-722 | 額定電壓可達1kV的電力裝置的安裝.臨時性建筑物、旅游展覽車和大篷車 [VDE 規范] | Erection of power installations with rated voltages up to 1000 V; temporary buildings, vehicles for travelling exhibitions and caravans [VDE Specification] |
| DIN VDE 0100-732 | 額定電壓最高可達 1 kV 的電力設備安裝.第732部分:公共電纜網建筑物的電纜入口 | Erection of power installations with nominal voltages up to 1000 V - Part 732: Cables entries into buildings in public cable networks |
| DIN VDE 0100-740 | 低壓電氣裝置.第7-740:專用裝置或場所的要求.集市場所、公共游樂場和馬戲場的建筑物、娛樂裝置和售貨亭用臨 | Low-voltage electrical installations - Part 7-740: Requirements for special installations or locations - Temporary electrical installations for structures, amusement devices and booths at fairgrounds, amusement parks and circuses (IEC 60364-7-740:2000, modified); German implementation HD 60364-7-740:2006 |
| DIN VDE 0298-4 | 電力設備中電纜和導線的應用.第4部分:建筑物內及周圍固定鋪設的鎧裝和非鎧裝電纜以及軟電纜和軟導線的載流 | Application of cables and cords in power installations - Part 4: Recommended current-carrying capacity for sheathed and nonsheathed cables for fixed wirings in and around buildings and for flexible cables and cords |
| DIN-Fachbericht 142 | 定向系統.露天建筑物定向系統的要求 | Orientation systems - Requirements on orientation systems in open buildings |
| DIN-Fachbericht 151 | 技術產品文件.設備管理文件.建筑物文件 | Technical product documentation - Facility management documentation - Building documentation |
| DIN-Fachbericht CEN/TR 14788 | 建筑物通風.住宅通風系統的設計和定尺寸 | Ventilation for buildings - Design and dimensioning of residential ventilation systems; |
| DIN-Fachbericht CEN/TR 15226 | 建筑產品.產品技術規范中的聲處理 | Building products - Treatment of acoustics in product technical specifications; German version CEN/TR 15226:2006 |
| DIN-Fachbericht CEN/TR 15235 | 焊接.金屬建筑中的不完整性的評價法 | Welding - Methods for assessing imperfections in metallic structures; German version CEN/TR 15235:2005 |
| 編號 | 中文名稱 | 英文名稱 |