微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| DIN 1158 | 鉤釘 | Hook nails |
| DIN 11860 | 乳品機械.壓力接頭用鉤形扳手 | Dairying machines; hook spanners for compression fittings |
| DIN 12895-2 | 金屬實驗室儀器.鉤形連接件 | Metal laboratory ware; hook connector |
| DIN 13122 | 醫療器械.1 1帶齒直式鉤鉗 | Medical instruments - Tenaculum forceps 1 × 1 teeth, straight |
| DIN 14851 | 頂棚吊鉤 | Ceiling hook |
| DIN 15105 | 起重設備用吊鉤.帶環單鉤 | Lifting hooks for lifting appliances; point hooks with collar |
| DIN 15106 | 提升吊鉤.簡單承載吊鉤的安全卡子 | Lifting hooks; safety catch for simple load hook |
| DIN 15400 | 起重吊鉤.材料、機械特性、承載能力和應力 | Lifting hooks; materials, mechanical properties, lifting capacity and stresses |
| DIN 15401-1 | 提升設備用起重鉤.單鉤.毛坯件 | Lifting hooks for lifting appliances; Single hooks; Unmachined parts |
| DIN 15401-2 | 起重機用吊鉤.單鉤.帶螺紋軸的成品件 | Lifting hooks for lifting appliances; Single hooks; Finished parts with threaded shank |
| DIN 15402-1 | 起重機用吊鉤.（Ramshorn hooks）雙鉤.毛坯件 | Lifting hooks for lifting appliances; Ramshorn hooks; Unmaschined parts |
| DIN 15402-2 | 起重機用吊鉤.（Ramshorn hooks）雙鉤.帶螺紋軸的成品 | Lifting hooks for lifting appliances; Ramshorn hooks; Finished parts with threaded shank |
| DIN 15403 | 起重機的提升吊鉤.圓螺紋 | Lifting Hooks for Hoists; Knuckle Threads |
| DIN 15404-1 | 起重機吊鉤.鍛制吊鉤交貨技術條件 | Lifting hooks; technical delivery conditions for forged hooks |
| DIN 15404-2 | 起重機吊鉤.軋制吊鉤交貨技術條件 | Lifting hooks; technical delivery conditions for laminated hooks |
| DIN 15405-1 | 起重機用吊鉤.第1部分:使用中鍛制吊鉤的檢驗 | Lifting hooks; inspection of forged hooks in service |
| DIN 15405-2 | 起重機吊鉤.軋制吊鉤使用中檢查 | Lifting hooks; In-service inspection of laminated hooks |
| DIN 15406 | 起重吊鉤.手工鍛制吊鉤的描繪，指令 | Lifting hooks; tracing of hand forged hooks, directives |
| DIN 15407-1 | 起重機用吊鉤.第1部分:插口鐵水包、組件用帶測點的疊層吊鉤.主要尺寸 | Lifting hooks; laminated hooks with a point for spigot ladles, assembly, principal dimensions |
| DIN 15407-2 | 插口鐵水包疊層鉚合式單鉤.第2部分:部件 | Laminated point hooks for spigot ladles; components |
| DIN 15411 | 提升設備.下滑車的提升吊鉤懸吊裝置 | Lifting appliances; lifting hook suspensions for bottom blocks |
| DIN 15413 | 起重機的下滑車.提升吊鉤螺母 | Bottom blocks for lifting appliances; lifting hook nuts |
| DIN 1804 | 鉤形扳手用開槽圓螺母.ISO米制細牙螺紋 | Slotted Round Nut for Hook Spanner; ISO Metric Fine Thread |
| DIN 1810 | 鉤形扳手 | Hook wrenches |
| DIN 20044 | 液壓動力傳輸管路用S型鉤環鎖定聯接器.尺寸、要求和試驗 | Staple-lock couplings type S for hydraulic power-transmission circuits - Dimensions, requirements, testing |
| DIN 20583 | 礦車.鉤環型連接器 | Mine cars - Shackle coupling |
| DIN 20619 | 礦山用懸架單軌道.帶懸掛鉤的卷繩滾筒.尺寸和要求 | Suspended monorails for mining; winding-drum with suspension hook; dimensions and requirements |
| DIN 20635 | 礦山單軌架空道.懸掛鉤環 | Monorails for mining - Suspensions shackles |
| DIN 22253 | 鏈?zhǔn)竭B接器.鏈鉤型連接器裝置.尺寸、要求、檢驗 | Chain connectors; shackle type connector units; dimensions, requirements, testing |
| DIN 30389 | 動力裝置螺旋扣和牽引掛鉤用帶圓螺紋的六角螺母和槽頂螺母 | Hexagon and castle nuts with knuckle thread - For motive power units turnbuckles and drawbars |
| DIN 34300 | 救護設備.帶安全繩環的救護鉤 | Rescue equipment - Rescue hooks with safety eyelet holes |
| DIN 4000-152 | 產品特性表設計.第152部分:扳手.機工扳手、套筒扳手、鉤形板手、插銷扳手 | Tabular layouts of properties - Part 152: Wrenches - Engineers wrenches, box wrenches, hook wrenches, pin wrenches |
| DIN 43167-2 | 工作電壓為交流1000V以下、直流1500V以下架空接觸線用棒式絕緣子.帽、U型螺栓和鉤頭螺栓 | Rod-type insulator for overhead contact lines for operating voltages up to 1000 V a.c. and 1500 V d.c.; caps, u-bolts and hook bolt |
| DIN 462 | 機床.按DIN 1804鉤形扳手用開槽圓螺母的內舌墊圈 | Machine Tools; Internal Tab Washers for Slotted Round Nuts for Hook Spanner according to DIN 1804 |
| DIN 46262-4 | 低壓用螺栓接線柱.第4部分:開口環、.鉤環、墊圈、墊片 | Low-voltage stud-terminals; snap rings, shackles, washers, shims |
| DIN 48055-3 | 通信架空線路用絕緣子心軸.鉤型心軸 | Insulator spindles for telecommunication overhead-lines; hook-shaped spindles |
| DIN 48154-1 | 架空電力線.第1部分:S形掛鉤絕緣子.絕緣體 | Power current overhead lines; shackle insulators S, insulator bodies |
| DIN 48154-2 | 架空電力線.第2部分:S形掛鉤絕緣子.弓形件 | Power current overhead lines; shackle insulators S, bows |
| DIN 48319 | 帶鉤螺釘 | Hook screws |
| DIN 49781 | 街道照明器用蹬形掛鉤. | Suspension stirrup for street lighting fittings |
| DIN 49980 | 照明設備.屋頂掛鉤.頂棚罩 | Luminaires; ceiling hooks, ceiling cups |
| DIN 5046 | 肉和其它食品用懸鉤.S鉤 | Hooks for meat and other foods; S-hook |
| DIN 5047 | 肉和其它食品用的懸掛鉤.管軌滑動掛鉤 | Hooks for meat and other food; tubular track sliding hook |
| DIN 5048 | 肉和其它食品用懸掛鉤.管軌滾子掛鉤 | Hooks for meat and other food; tubular track roller hook |
| DIN 51302-2 | 材料試驗機.拉伸.加壓和彎曲試驗機的檢驗.建筑材料壓力試驗機的鉤檢驗 | Materials testing machines - Strain cylinder test method for compression testing machines for concrete |
| DIN 5287 | 單件制單鉤彈簧鉤 | Simplex hook spring hooks made of one piece |
| DIN 5289 | 剪刀形彈簧保險鉤 | Scissors snap |
| DIN 5290-1 | 有鎖緊螺母的輕金屬彈簧鉤.尺寸、要求、檢驗 | Snap hook from light metal; with setting nut; dimensions, requirements and testing |
| DIN 5297-2 | 帶固定圓環和橢圓環的彈簧鎖鉤 | Spring snap with fixed round eye and oval eye |
| DIN 5299 | 半圓鋼絲、圓鋼絲及鍛造的彈簧保險鉤 | Snap hook half-round wire, round wire and forged |
| DIN 5406 | 滾動軸承.鎖緊墊圈.止動鉤安全平墊圈 | Rolling bearings; lockwashers; safety plate, lockclip |
| DIN 5683-2 | 浮標錨鏈卸扣、錨轉環和轉鉤 | Buoy chains shackles, swivels, swivel hooks |
| DIN 5688-1 | 帶鉤式或環式端配件的5級鏈?zhǔn)降跛? | Grade 5 chain slings with hook or ring type terminal fittings |
| DIN 5699 | 傳動帶輸送機用U型鏈節（U形鉤環） | Chain U-links (shackles) for conveyors |
| DIN 58288 | 醫療器械；Langenbeck式傷口拉鉤 | Medical instruments; retractor type Langenbeck |
| DIN 58292 | 醫療器械；氣管鉤 | Medical instruments; tracheal hook |
| DIN 58295 | 醫療器械；Volkmann式骨科用拉鉤 | Medical instruments; retractor type Volkmann |
| DIN 58805-1 | 骨髓插釘用器械.第1部分:螺紋式拔釘鉤 | Instruments for intramedullary nailing; extracting hook with thread |
| DIN 62150 | 圓型緯編機用鉤針.圓形掛綜桿 | Spring bearded needles for circular weft knitting machines; round shank |
| DIN 62151 | 圓型緯編機用鉤針.扁平有槽掛綜桿 | Spring bearded needles for circular weft knitting machines; flat groove shank |
| DIN 62154 | 鉤針成形平機的沉降片.術語和定義 | Sinkers for straight bar knitting machines; terms and definitions |
| DIN 68856-4 | 家具用五金件.家具裝配附件術語.閂、掛鉤.調節器 | Hardware for furniture; terms for furniture fittings; holding devices, flap stays, lid stays |
| DIN 695 | 帶鉤式或環式端配件的2級鏈?zhǔn)降跛? | Grade 2 chain slings with hook or ring type terminal fittings |
| DIN 72786-1 | 公路車輛風擋刮水器系統.弧刷臂.第1部分:掛鉤固定用A型刮水器刮板 | Windscreen wiper systems for road vehicles - Wiper arm - Part 1: Type A wiper blades for hook fastening |
| DIN 74053-1 | 牽引車和拖車之間的機械連接件.50 mm 牽引車掛鉤孔眼.第1部分:帶襯套 | Mechanical connections between towing vehicles and trailers - 50 mm drawbar-eye - Part 1: With sleeve |
| DIN 74054-1 | 牽引車和掛車的機械連接.第1部分:帶套筒的 40 mm 牽引車掛鉤眼 | Mechanical connections between towing vehicles and trailers; 40 mm drawbar-eye with sleeve |
| DIN 74080 | 鉸接式汽車列車的掛鉤裝置.50半掛車的轉盤接合.功能和安裝尺寸、要求 | Coupling devices for articulated road trains; 50 semi-trailer fifth wheel coupling pin; functional and mounting dimensions, requirements |
| DIN 74083 | 鉸接式汽車列車的掛鉤裝置.90半掛車的轉盤接合.功能和安裝尺寸、要求 | Coupling devices for articulated road trains; 90 semi-trailer fifth wheel coupling pin; functional and mounting dimensions, requirements |
| DIN 7540 | 5級環鉤. | Eye hooks, grade 5 |
| DIN 7541 | 提升設備.大孔環掛鉤.5級 | Lifting appliances; large-eye hooks; grade 5 |
| DIN 81310 | 船上推拉門帶鉤頭彈簧閂的彈簧鎖 | Rim-locks with hook latch-bolt for sliding doors on ships |
| DIN 81404 | 門鉤用懸掛門扣 | Suspension catch for door hooks |
| DIN 81405 | 門鉤和門鉤環 | Door hooks and corresponding eye |
| DIN 81406 | 活板門用自落式門鉤 | Door-fallhook for trap-doors |
| DIN 81407 | 衣夾、窗簾鉤、毛巾鉤 | Clothes-pegs, curtain hooks, towel hooks |
| DIN 81408 | 帶螺紋鉤 | Screwing-hooks |
| DIN 81420 | 鋼制門鉤 | Door hooks, made of steel |
| DIN 82017 | 貨物吊鉤 | Cargo hooks |
| DIN 82018 | 船貨吊鉤轉環 | Cargo hook swivels |
| DIN 82019 | Ramshorn 螺紋桿鉤.帶雙耳和帶孔眼的米制螺紋桿 | Ramshorn shank hooks; shank with metric thread, with double lug and with eye |
| DIN 82101 Berichtigung 1 | 提升、拖引、捆索用元件.D形鉤環.非合金優質鋼.DIN 82101-2005的技術勘誤 | Components for lifting, towing, lashing - Shackle, dee - Non-alloy quality steel, Corrigenda to DIN 82101:2005-09 |
| DIN 82101 | 提升、拖引、捆索用元件.D形鉤環.非合金優質鋼 | Components for lifting, towing, lashing - Shackle, dee - Non-alloy quality steel |
| DIN 82102 | 提升、拖引、捆索用元件.D形鉤環.不銹鋼 | Components for lifting, towing, lashing - Shackle, dee - Stainless steels |
| DIN 82103 | 提升、拖引、捆索用元件.弓形鉤環.不銹鋼 | Components for liftig, towing, lashing - Shackle, bow - Stainless steels |
| DIN EN 1147 Bb.1 | 符合DIN EN 1147的消防隊用便攜式梯子.消防梯、掛鉤梯、伸縮梯、組合梯、承窩件和多功能梯 | Portable ladders for fire brigade in accordance to DIN EN 1147 - Stick ladder, hook ladder, extending ladder, sectional ladder, socket part, multifunction ladder |
| DIN EN 1381 | 木結構.試驗方法.承重的鉤環接合.德文版本EN1381:1999 | Timber structures - Test methods - Load bearing stapled joints; German version EN 1381:1999 |
| DIN EN 13889 | 一般提升用鍛鋼帶銷U形環.固定D形環鉤和弓形環鉤. 6級安全要求 | Forged steel shackles for general lifting purposes - Dee shackles and bow shackles; Grade 6 - Safety; German version EN 13889:2003 |
| DIN EN 15020 | 鐵路設施.救援設備車鉤.性能要求、專用聯結幾何尺寸和試驗方法 | Railway applications - Rescue coupler - Performance requirements, specific interface geometry and test methods; English version of DIN EN 15020:2007-02 |
| DIN EN 1677-2 | 吊索元部件.安全.第2部分:8級鍛鋼制帶卡齒吊鉤 | Components for slings - Safety - Part 2: Forged steel lifting hooks with latch, grade 8; German version EN 1677-2:2000 |
| DIN EN 1677-3 | 吊索元部件.安全性.第3部分:8級鍛鋼制自鎖吊鉤 | Components for slings - Safety - Part 3: Forged steel self-locking hooks, grade 8; German version EN 1677-3:2001 |
| DIN EN 1677-5 | 吊索元件.安全性.第5部分:帶閂鎖的鍛壓鋼提升鉤,4級 | Components for slings - Safety - Part 5: Forged steel lifting hooks with latch, Grade 4; German version EN 1677-5:2001 |
| DIN EN 2591-6414 | 航空航天系列.光電連接件.試驗方法.第6414部分:光學元件.脫鉤拉索式光學連接件的失配性 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 6414: Optical elements; Unmating of lanyard release optical connection elements; German and English version EN 2591-6414:2001 |
| DIN EN 517 | 屋頂預制附件.屋頂安全吊鉤 | Prefabricated accessories for roofing - Roof safety hooks English version of DIN EN 517:2006-05 |
| DIN EN 846-8 | 磚石工程輔助元部件試驗方法.第8部分:擱柵吊鉤載荷能力和加載變形特性測定 | Methods of test for ancillary components for masonry - Part 8: Determination of load capacity and load-deflection characteristics of joist hangers(includes Amendment A1:2006); English version of DIN EN 846-8:2006-10 |
| DIN ISO 11406 | 商用道路車輛.帶尾部連接器的牽引車輛和掛鉤掛車間的機械連接器.互換性 | Commercial road vehicles - Mechanical coupling between towing vehicles with rear-mounted coupling and drawbar trailers - Interchangeability; identical with ISO 11406:1993 |
| DIN ISO 11825 | 紡織機械和附件.編織機用舌型針.針桿寬度和鉤針高度的調整 | Textile machinery and accessories - Latch-type needles for knitting machines - Coordination of shank widths and hook heights (ISO 11825:1995) |
| DIN ISO 2331 | 叉車.掛鉤型貨叉.詞匯 | Fork lift trucks, hook-on type fork arms; vocabulary |
| DIN ISO 8119-2 | 紡織機械和附件.針織機針.術語.第2部分:鉤針 | Textile machinery and acessories; neddles for knitting machines; terminology; bearded needles; identical with ISO 8119-2:1989 |
| DIN V 74053-10 | 牽引車和拖車之間的機械連接件.第10部分:帶襯套的 50 mm 牽引車掛鉤孔眼與中心軸掛車使用的附加規范 | Mechanical connections betweeen towing vehicles and trailers; drawbar eye 50 with sleeve; additional specifications for applications on centre axle trailers |
| DIN V 74054-10 | 牽引車和拖車之間的機械連接件.第10部分:帶襯套的 40 mm 牽引車掛鉤孔眼與中心軸掛車使用的附加規范 | Mechanical connections between towing vehicles and trailers; drawbar eye 40 with sleeve; additional specifications for applications on centre axle trailers |
| DIN V 81851 | K4 級錨鏈鋼纜.斜連接鉤環 | Anchor chain cables grade K4 - Kenter type joining shackles |
| 編號 | 中文名稱 | 英文名稱 |