微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| DIN 12217 | 實驗室玻璃器皿.硼硅酸鹽3.3玻璃管 | Laboratory glassware - Tubes made of borosilicate glass 3.3 |
| DIN 17567 | 硼鐵.交貨技術條件 | Ferroboron - Technical delivery conditions |
| DIN 25421 | 裂變物質溶液硼硅玻璃拉希格圈中子吸收劑的使用 | Use of borosilicate glass raschig rings as a neutron absorber in solutions of fissile material |
| DIN 38405-17 | 德國對水.廢水和淤泥的統一檢驗法.陰離子（Ｄ組）.硼酸鹽離子的測定（Ｄ１７） | German Standard Methods for the Analysis of Water, Waste Water and Sludge; Anions (Group D); Determination of Borate Ions (D 17) |
| DIN 4000-134 | 性能表.第134部分:含金剛石和氮化硼的不可旋轉制品 | Tabular layouts of properties - Part 134: Non rotating products with diamond or boron nitride |
| DIN 50449-2 | 半導體工藝材料試驗.通過紅外線吸收測定半導體中雜質含量.第2部分:砷化鎵中的硼 | Testing of materials for semiconductor technology - Determination of impurity content in semiconductors by infrared absorption - Part 2: Boron in gallium arsenide |
| DIN 51079-1 | 陶瓷材料的檢驗.作為原材料和材料成分的碳化硅的化學分析.第1部分:用碳酸鈉和硼酸分解 | Testing of ceramic materials - Chemical analysis of silicon carbide used as raw material and as constituent in materials - Part 1: Decomposition with sodium carbonate and boric acid |
| DIN 51086-1 | 氧化原材料和陶瓷、玻璃和釉瓷材料的試驗,第1部分:氧化硼的測定 | Testing of oxidic raw materials and materials for ceramics, glass and glazes - Part 1: Determination of boric oxide |
| DIN 51443 | 潤滑劑的試驗.潤滑油中硼含量的測定.用原子吸收光譜法直接測定 | Testing of lubricants; determination of the boron content in lubricating oils; direct determination by Atomic Absorption Spectrometry (AAS) |
| DIN 51443-2 | 潤滑劑試驗.硼含量測定.第2部分:通過感應耦合等離子體用光發射光譜分析直接測定 | Testing of lubricants - Determination of the boron content - Part 2: Direct determination by optical emission spectral analysis with inductively coupled plasma (ICP OES) |
| DIN 65116 | 航空和航天.硼纖維增強的模塑材料.層壓試件的制備 | Aerospace; boron fibre reinforced mouldings, preparation of test laminates |
| DIN 65117 | 航空和航天.預浸漬單向硼纖維層(BFK-浸漬體)，尺寸、質量 | Aerospace; preimpregnated unidirectional boron fibres (BFK-prepreg), dimensions, masses |
| DIN 7080 | 低溫范圍內無限制的硼硅酸鹽玻璃制抗壓圓形視孔玻璃 | Pressure resistant circular sight glasses of borosilicate glass without limitation in the range of low temperature |
| DIN 7081 | 低溫范圍內無限制的抗壓長方形硼硅玻璃觀察鏡 | Pressure resistant oblong sight glasses of borosilicate glass without limitation in the range of low temperature |
| DIN EN 10200 | 黑色金屬材料的化學分析.鋼中硼含量的測定.分光光度法 | Chemical analysis of ferrous materials; determination of boron in steel by spectrophotometry; german version EN 10200:1991 |
| DIN EN 13024-1 | 建筑用玻璃.熱鋼化硼硅酸鹽安全玻璃.第1部分:定義和說明; 德文版本 EN 13024-1:2002 | Glass in building - Thermally toughened borosilicate safety glass - Part 1: Definition and description; German version EN 13024-1:2002 |
| DIN EN 13024-2 | 建筑用玻璃.熱鋼化硼硅酸鹽安全玻璃.第2部分:合格評價/產品標準 | Glass in building - Thermally toughened borosilicate safety glass - Part 2: Evaluation of conformity/Product standard; German version EN 13024-2:2004 |
| DIN EN 1595 | 硼硅酸鹽玻璃3.3制壓力設備.設計、制造和檢驗總則 | Pressure equipment made from borosilicate glass 3.3 - General rules for design, manufacture and testing; German version EN 1595:1997 |
| DIN EN 1748-1-1 | 建筑玻璃.特種基礎產品.硼硅酸鹽玻璃.第1-1部分:定義和一般物理和機械性能 | Glass in building - Special basic products - Borosilicate glasses - Part 1-1: Definitions and general physical and mechanical properties; German version EN 1748-1-1:2004 |
| DIN EN 1748-1-2 | 建筑用玻璃.特種基礎產品.硼硅酸鹽玻璃.第1-2部分:合格評價/產品標準 | Glass in building - Special basic products - Borosilicate glasses - Part 1-2: Evaluation of conformity/Product standard; German version EN 1748-1-2:2004 |
| DIN EN 3922 | 航空航天系列.NI-B41203 (NiCr7Si5B3)鎳基合金.硬釬焊用金屬填料.硼薄片 | Aerospace series - Nickel base alloy NI-B41203 (NiCr7Si5B3) - Filler metal for brazing - Borided foil; German version EN 3922:1998 |
| DIN EN 3926 | 航空航天系列.鎳基合金NI-B40001(NiSi5B3).硬釬焊填充金屬.硼化物箔 | Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing, borided foil; German version EN 3926:2001 |
| DIN EN 3935 | 航空航天系列.鎳基合金NI-B21001.銅焊用填充金屬、硼化物箔 | Aerospace series - Nickel base alloy NI-B21001 (NiCr15B4) - Filler metal for brazing, borided foil; German and English version EN 3935:2001 |
| DIN EN 3942 | 航空航天系列.鎳基合金NI-B41204(NiCr13Si4B3).硬釬焊填充金屬.硼化物箔 | Aerospace series - Nickel base alloy NI-B41204 (NiCr13Si4B3) - Filler metal for brazing, borided foil; German version EN 3942:2001 |
| DIN EN 4103 | 航空航天系列.鎳基合金NI-B40002.銅焊用填充金屬、硼化箔 | Aerospace series - Nickel base alloy NI-B40002 (NiSi4B2) - Filler metal for brazing, Borided foil; German and English version EN 4103:2001 |
| DIN EN ISO 13900 | 鋼.硼含量測定.蒸餾后姜黃色素光譜測定法 | Steel - Determination of boron content - Curcumin spectrophotometric method after distillation (ISO 13900:1997); German version EN ISO 13900:2002 |
| DIN EN ISO 21078-2 | 耐火制品中氧化硼(III)的測定.第2部分:用酸提取法測定粘合物中的氧化硼(III) | Determination of boron(III) oxide in refractory products - Part 2: Acid extraction method for the determination of boron(III) oxide in binder components (ISO 21078-2:2006); German version EN ISO 21078-2:2007 |
| DIN ISO 16462 | 鑲片或?qū)嵭牧⒎叫蔚痂傹X.尺寸、類型 | Cubic boron nitride inserts, tipped or solid - Dimensions, types (ISO 16462:2004) |
| DIN ISO 1802 | 天然濃縮橡膠膠乳.硼酸含量的測定 | Rubber latex, natural, concentrate - Determination of boric acid content (ISO 1802:1992) |
| DIN ISO 22917 | 超磨料.金剛石或立方體氮化硼砂輪的極限偏差和跳動誤差 | Superabrasives - Limit deviations and run-out tolerances for grinding wheels with diamond or cubic boron nitride (ISO 22917:2004) |
| DIN ISO 3585 | 3.3硼硅酸鹽玻璃.特性(ISO 3585-1998) | Borosilicate glass 3.3 - Properties (ISO 3585:1998) |
| DIN ISO 6104 | 超磨料制品.帶金剛石或立方氮化硼的旋轉磨削工具.一般評述、名稱與符號和多種語言術語 | Superabrasive products - Rotating grinding tools with diamond or cubic boron nitride - General survey, designation and multilingual nomenclature (ISO 6104:2005) |
| 編號 | 中文名稱 | 英文名稱 |