微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| CR 13909 | 識別卡系統 內部用薄柔性卡 驗收標準 | Identification card systems - Intersector thin flexible cards - Acceptance criteria |
| DL 490-1992(2005) | 大中型水輪發電機靜止整流勵磁系統及裝置安裝、驗收規程 | () |
| DL 5007 | 電力建設施工及驗收技術規范（火力發電廠焊接篇） | () |
| DL 5011-1992(2005) | 電力建設施工及驗收技術規范（汽輪機機組篇） | () |
| DL/T 1012 | 火力發電廠汽輪機監視和保護系統驗收測試規程 | () |
| DL/T 1048 | 標稱電壓高于1000V的交流用棒形支柱復合絕緣子—定義、試驗方法及驗收規則 | Composite post insulators for a.c with a nominal voltage greater than 1000V---Definitions,Test methods and acceptance criteria |
| DL/T 1068 | 水輪機進水液動碟閥選用、試驗及驗收導則 | Specification for hydraulic operation butterfly valve selection,test and acceptance of hydraulic turbine inlet |
| DL/T 446-1991(2005) | 水輪機模型驗收試驗規程 | () |
| DL/T 5017 | 水電水利工程壓力鋼管制造安裝及驗收規范 | Specifications for manufacture installation and acceptance of steel penstocks in hydroelectric and hydraulic engineering |
| DL/T 5018 | 水電水利工程鋼閘門制造安裝及驗收規范 | () |
| DL/T 5019-1994(2005) | 水利水電工程啟閉機制造、安裝及驗收規范 | () |
| DL/T 5031-1994(2005) | 電力建設施工及驗收技術規范(管道篇) | () |
| DL/T 5047-1995(2005) | 電力建設施工及驗收技術規范 鍋爐機組篇 | () |
| DL/T 5123 | 水電站基本建設工程驗收 規程 | () |
| DL/T 519 | 火力發電廠水處理用離子交換樹脂驗收標準 | () |
| DL/T 5190.4 | 電力建設施工及驗收技術規范 第4部分：電廠化學 | () |
| DL/T 5190.5 | 電力建設施工及驗收技術規范 第5部分：熱工儀表及控制裝置 | () |
| DL/T 5191 | 風力發電場項目建設工程驗收規程 | () |
| DL/T 521 | 真空凈油機驗收及使用維護導則 | () |
| DL/T 5210.1 | 電力建設施工質量驗收及評定規程 第1部分：土建工程 | () |
| DL/T 5344 | 電力光纖通信工程驗收規范 | () |
| DL/T 5403 | 火電廠煙氣脫硫工程調整試運及質量驗收評定規程 | Specification for commissioning and quality acceptance and evaluation of flue gas desulphurization for coal-fired power plant |
| DL/T 543-1994(2005) | 電廠用水處理設備質量驗收標準 | () |
| DL/T 602-1996(2005) | 架空絕緣配電線路施工及驗收規程 | () |
| DL/T 655 | 火力發電廠鍋爐爐膛安全監控系統驗收測試規程 | () |
| DL/T 656 | 火力發電廠汽輪機控制系統驗收測試規程 | () |
| DL/T 657 | 火力發電廠模擬量控制系統驗收測試規程 | () |
| DL/T 658 | 火力發電廠開關量控制系統驗收測試規程 | () |
| DL/T 659 | 火力發電廠分散控制系統驗收測試規程 | () |
| DL/T 665 | 水汽集中取樣分析裝置驗收標準 | () |
| DL/T 747 | 發電用煤機械采制樣裝置性能驗收導則 | () |
| DL/T 782 | 110kV及以上送變電工程啟動及竣工驗收規程 | () |
| DL/T 789 | 縣級電網調度自動化系統實用化要求及驗收 | () |
| DL/T 822 | 水電廠計算機監控系統試驗驗收規程 | () |
| DL/T 824 | 汽輪機電液調節系統性能驗收導則 | () |
| DL/T 851 | 聯合循環發電機組驗收試驗 | () |
| DL/T 909 | 正壓氣力除灰系統性能驗收試驗規程 | () |
| DL/T 913 | 火電廠水質分析儀器質量驗收導則 | () |
| DL/T 922 | 火力發電用鋼制通用閥門訂貨、驗收導則 | () |
| DL/T 951 | 火電廠反滲透水處理裝置驗收導則 | () |
| DL/T 952 | 火力發電廠超濾水處理裝置驗收導則 | () |
| DL/T 968 | 高壓直流輸電工程啟動及竣工驗收規程 | () |
| DL/T 998 | 石灰石—石膏濕法煙氣脫硫裝置性能驗收試驗規范 | () |
| GB 10060 | 電梯安裝驗收規范 | Code for acceptance of lifts installation |
| GB 16007 | 大骨節病病區控制及考核驗收辦法 | Control，checking and accepting methodsof kashin-beck disease area |
| GB 17681 | 易燃易爆罐區安全監控預警系統驗收技術要求 | Technical requirements of acceptance for safety monitoring，controlling and early warning system of inflammable and explosive tank farm |
| GB 7121 | 農林輪式拖拉機防護裝置強度試驗方法和驗收條件 | Agricultural and forestrywheeled tractors--Protective structures--Test method in the strength and acceptance conditions |
| GB/T 10325 | 定形耐火制品抽樣驗收規則 | Shaped refractory products--Sampling and acceptance testing |
| GB/T 10490 | 輕型燃汽輪機驗收試驗規范 | Light weight gas turbines acceptance test specification |
| GB/T 14100 | 燃?xì)廨啓C驗收試驗 | Gas turbines--Acceptance tests |
| GB/T 15613 | 水輪機模型驗收試驗規程 | Code for model acceptance tests of hydraulic turbines |
| GB/T 15659 | 農村初級電氣化驗收規程 | The acceptance examination code of primary rural electrification |
| GB/T 15773 | 水土保持綜合治理驗收規范 | Regulation of acceptance for comprehensive control of soil erosion |
| GB/T 1604 | 商品農藥驗收規則 | Commodity pesticide regulations for acceptance |
| GB/T 16857.1 | 產品幾何量技術規范(GPS)坐標測量機的驗收檢測和復檢檢測第1部分:詞匯 | Geometrical product specification(GPS)--Acceptance and reverification tests for coordinate measuring machines--Part 1:Vocabulary |
| GB/T 16857.2 | 產品幾何技術規范(GPS) 坐標測量機的驗收檢測和復檢檢測 第2部分: 用于測量尺寸的坐標測量機 | Geometrical Product Specifications(GPS) - Acceptance and reverification tests for coordinate measuring machines(CMM) - Part 2: CMMs used for measuring size |
| GB/T 16857.4 | 產品幾何量技術規范(GPS)坐標測量機的驗收檢測和復檢檢測第4部分: 在掃描模式下使用的坐標測量機 | Geometrical Product Specifications(GPS)--Acceptance andreverification tests for coordinate measuring machines(CMM)--Part 4: CMMs used in scanning measuring mode |
| GB/T 16857.5 | 產品幾何量技術規范(GPS)坐標測量機的驗收檢測和復檢檢測第5部分:使用多探針探測系統的坐標測量機 | Geometrical Product Specifications(GPS)--Acceptance and reverification tests for coordinate measuring machines(CMM)--Part 5:CMMs using multiple-stylus probing systems |
| GB/T 16857.6 | 產品幾何技術規范(GPS) 坐標測量機的驗收檢測和復檢檢測 第6部分:計算高斯擬合要素的誤差的評定 | Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features |
| GB/T 17425 | 貨車車鉤、鉤尾框采購和驗收技術條件 | Purchase and acceptance of couplersand coupler yokes for freight service |
| GB/T 17442 | 1級和2級直接接入靜止式交流有功電度表驗收檢驗 | Acceptance inspection fordirect connected alternating current static watt-hour meters for active energy (classes 1 and 2) |
| GB/T 17587.3 | 滾珠絲杠副第3部分:驗收條件和驗收檢驗 | Ball screws--Part 3:Acceptance conditions and acceptance tests |
| GB/T 17908 | 起重機和起重機械技術性能和驗收文件 | Cranes and lifting appliances--Technical characteristics and acceptance documents |
| GB/T 18002 | 中密度纖維板生產線驗收通則 | Acceptance generality of the medium densityfibreboard production line |
| GB/T 18264 | 刨花板生產線驗收通則 | Acceptance generality of the particle board production line |
| GB/T 18316 | 數字測繪產品檢查驗收規定和質量評定 | Specification for inspection，acceptance and quality assessment of digital surveying and mapping products |
| GB/T 18438 | 港口起重機驗收試驗規則 | Harbour crane--Acceptance test rule |
| GB/T 18440 | 港口起重機技術性能和驗收文件 | Harbour crane--Technical characteristics and acceptance documents |
| GB/T 18666 | 商品煤質量抽查和驗收方法 | Method for quality sport check and acceptanceof commercial coal |
| GB/T 18699.2 | 聲學隔聲罩的隔聲性能測定第2部分:現場測量(驗收和驗證用) | Acoustics--Determination of sound insulation performances of enclosures--Part 2:Measurements in situ (for acceptance and verification purposes) |
| GB/T 18713 | 太陽熱水系統設計、安裝及工程驗收技術規范 | Solar water heating systems--Design，installation and engineering acceptance |
| GB/T 18929 | 聯合循環發電裝置驗收試驗 | Acceptance tests for combined-cycle power plants |
| GB/T 19042.1 | 醫用成像部門的評價及例行試驗第3-1部分:X射線攝影和透視系統用X射線設備成像性能驗收試驗 | Evaluation and routine testing in medical imaging departments--Part 3-1: Acceptance test--Imaging performance of X-ray equipment for radiographic and radioscopic systems |
| GB/T 19042.2 | 醫用成像部門的評價及例行試驗第3-2部分:乳腺攝影X射線設備成像性能驗收試驗 | Evaluation and routine testing in medical imaging departments-Part 3-2:Acceptance tests-Imaging performance of mammographic X-ray equipment |
| GB/T 19042.3 | 醫用成像部門的評價及例行試驗第3-3部分:數字減影血管造影（DSA）X射線設備成像性能驗收試驗 | Evaluation and routine testing in medical imaging departments-Part 3-3:Acceptance tests-Imaging performance of X-ray equipment for digital subtraction angiography(DSA) |
| GB/T 19042.4 | 醫用成像部門的評價及例行試驗第3-4部分:牙科X射線設備成像性能驗收試驗 | Evaluation and routine testing in medical imaging departments-Part 3-4:Acceptance tests-Imaging performance of dental X-ray equipment |
| GB/T 19042.5 | 醫用成像部門的評價及例行試驗 第3-5部分：X射線計算機體層攝影設備成像性能驗收試驗 | Evaluation and routine testing in medical imaging departments - Part 3-5: Acceptance tests-Imaging performances of computed tomography X-ray equipment |
| GB/T 19046 | 醫用電子加速器驗收試驗和周期檢驗規程 | Medical electron accelerators--Acceptance and periodic tests |
| GB/T 19063 | 液體食品包裝設備驗收規范 | Acceptance specification of packaging equipment for liquid food |
| GB/T 19498 | 農林拖拉機防護裝置靜態試驗方法和驗收技術條件 | The static testing method and accepting technical comdition of the protective structures on agricultural and forestry tractors |
| GB/T 19519 | 標稱電壓高于1000V的交流架空線路用復合絕緣子----定義、試驗方法及驗收準則 | Composite insulators for a.c.overhead lines with a nominal voltage greater than 1 000V--Definitions，test methods and acceptance criteria |
| GB/T 20019 | 熱噴涂熱噴涂設備的驗收檢查 | Thermal spraying -- Acceptance inspection of thermal spraying equipment |
| GB/T 20043 | 水輪機、蓄能泵和水泵水輪機水力性能現場驗收試驗規程 | Field Acceptance Test to Determine the Hydraulic Performance of Hydraulic Turbine,storage pumps and pump-turbines |
| GB/T 20050 | 游樂設施檢驗驗收 | Amusement devices inspect acceptance |
| GB/T 20238 | 木質地板鋪裝、驗收和使用規范 | Installation, inspection and usage guidelines for wooden flooring |
| GB/T 20299.2 | 建筑及居住區數字化技術應用 第2部分：檢測驗收 | Digital technique application of building and residence community - Part 2: Test and acceptance |
| GB/T 20319 | 風力發電機組 驗收規范 | Code for acceptance of Wind turbines generator systems |
| GB/T 20946 | 起重用短環鏈 驗收總則 | () |
| GB/T 20969.3 | 特殊環境條件 高原機械 第3部分：高原型工程機械選型、驗收規范 | () |
| GB/T 2101 | 型鋼驗收、包裝、標志及質量證明書的一般規定 | General requirements of acceptance，packaging，marking and certification for section steel |
| GB/T 2102 | 鋼管的驗收、包裝、標志和質量證明書 | Acceptance, packing, marking and quality certification of steel pipe |
| GB/T 2103 | 鋼絲驗收、包裝、標志及質量證明書的一般規定 | General provisions for checking，packing，marking and quality certification of steel wire |
| GB/T 21031 | 節水灌溉設備現場驗收規程 | () |
| GB/T 2317.4 | 電力金具驗收規則、標志與包裝 | Acceptance inspection，marking and packing for electric power fittings |
| GB/T 2700 | 黃麻麻紗、線的驗收規定 | Jute yarns and threads--Acceptance inspection regulation |
| GB/T 3216 | 回轉動力泵水力性能驗收試驗1級和2級 | Rotodynamic pumps-Hdraulic peformance acceptance tests-Grades 1 and 2 |
| GB/T 3302 | 日用陶瓷器驗收、包裝、標志、運輸、儲存規則 | Rule of acceptance， pack，mark， transport and reserve for domestic ceramic ware |
| GB/T 3650 | 鐵合金驗收、包裝、儲運、標志和質量證明書的一般規定 | The general rules for inspection，packing，storing transportation，marking and certification of ferroalloy |
| GB/T 3853 | 容積式壓縮機驗收試驗 | Displacement compressor--Acceptance tests |
| GB/T 3925 | 2.0級交流電度表的驗收方法 | Acceptance inspection of class 2 alternatingcurrent watthour meters |
| GB/T 4346.2 | 機床用手動自定心卡盤第2部分:驗收試驗規范(幾何精度檢驗) | Self-centring manually-operated chucks for machine tools--Part 2:Acceptance test specifications(geometrical tests) |
| GB/T 4751 | 戶用沼氣池質量檢查驗收規范 | Specification for check and acceptance of the quality for household anerobie digesters |
| GB/T 6404.1 | 齒輪裝置的驗收規范第1部分：空氣傳播噪聲的試驗規范 | Acceptance code for gear units-Part1:Test code for airborne sound |
| GB/T 6404.2 | 齒輪裝置的驗收規范第2部分：驗收試驗中齒輪裝置機械振動的測定 | Acceptance code for gear units-Part2:Determination of mechanical vibrations of gear units during acceptance testing |
| GB/T 6841 | 縫紉線驗收規則 | Acceptance examination regulation for sewing thread |
| GB/T 735 | 黃麻麻袋、麻布驗收規定 | Gunnybags， hessiancloth--Rules of acceptance |
| GB/T 8117 | 電站汽輪機熱力性能驗收試驗規程 | Rules for power plant steam turbine thermal acceptance tests |
| GB/T 90.1 | 緊固件驗收檢查 | Fasteners--Acceptance inspectiox |
| GB/T 9652.2 | 水輪機調速器與油壓裝置試驗驗收規程 | Test acceptance codes of governors and pressure oil supply units for hydro-turbines |
| HG 20202 | 脫脂工程施工及驗收規范 | () |
| HG 20203 | 化工機器安裝工程施工及驗收規范（通用規定） | () |
| HG 20225 | 化工金屬管道工程施工及驗收規范 | () |
| HG/T 3921 | 化學試劑 采樣及驗收規則 | Chemical reagent-Regulations for sampling and acceptance |
| HGJ 205 | 化工機器安裝工程施工及驗收規范（離心式壓縮機） | () |
| HGJ 206 | 化工機器安裝工程施工及驗收規范（中小型活塞式壓縮機） | () |
| HGJ 212 | 金屬焊接結構濕氣式氣柜施工及驗收規范 | () |
| HGJ 226 | 管式爐安裝工程施工及驗收規范 | () |
| HGJ 229 | 工業設備、管道防腐蝕工程施工及驗收規范 | () |
| JB/T 10082 | 電火花線切割機 制造與驗收技術要求 | () |
| JB/T 10397 | 離網型風力發電機組驗收規范 | () |
| JB/T 10694 | 進口二手挖掘機驗收規范 | () |
| JB/T 10770 | 真空技術 液環真空泵驗收規范 | Vacuum technology-Acceptance specifications for liquid ring vacuum pumps |
| JB/T 3226 | 木工刨床 制造與驗收技術條件 | () |
| JB/T 3375 | 鍋爐用材料入廠驗收規則 | () |
| JB/T 4068 | 刻模銑床 制造與驗收技術要求 | () |
| JB/T 4127.3 | 機械密封 產品驗收技術條件 | () |
| JB/T 4273 | 汽輪機轉速控制系統驗收試驗 | () |
| JB/T 50190 | 齒輪滾刀 壽命試驗方法及驗收條件 | () |
| JB/T 5234 | 工業控制計算機系統驗收大綱 | () |
| JB/T 5413－2007 | 混流泵、軸流泵開式葉片驗收技術條件 | Acceptance specification for mixed and axial flow pumps with open blades |
| JB/T 7175.4 | 滾動直線導軌副 第4部分：驗收技術條件 | Rolling Linear Guide-Part 4: Acceptance Specification |
| JB/T 7325 | 農林窄輪距輪式拖拉機防護裝置 強度試驗方法和驗收條件 | () |
| JB/T 7328 | 斗輪堆取料機 驗收技術規范 | () |
| JB/T 7601.2 | 電線電纜專用設備 基本技術要求 第2部分 檢驗和驗收 | () |
| JB/T 7943.2 | 潤滑裝置及元件 檢查驗收規則 | () |
| JB/T 8058 | 空氣分離設備用活性氧化鋁 驗收技術條件 | () |
| JB/T 8074.1 | 機床用手動自定心卡盤 驗收試驗規范(幾何精度檢驗) | () |
| JB/T 8108.1 | 起重用短環鏈 驗收總則 | () |
| JB/T 8471 | 袋式除塵器 安裝技術要求與驗收規范 | () |
| JB/T 8715 | 汽車起重機和輪胎起重機回轉機構驗收規范 | () |
| JB/T 8896 | 工業機器人 驗收規則 | () |
| JB/T 9907.2 | 雙端面磨床 制造與驗收技術要求 | () |
| MT 716－2005 | 煤礦重要用途鋼絲繩驗收技術條件 | () |
| QB 6003 | 真空制鹽工業設備安裝工程施工及驗收規范 | () |
| QB/T 1111.3 | 精光刨床 制造與驗收技術條件 | () |
| QB/T 1187 | 皮鞋驗收,標志,包裝,運輸和貯存 | () |
| QB/T 1262 | 毛皮成品驗收規則 | () |
| QB/T 2801－2006 | 皮革成品驗收規則 | () |
| QB/T 6019 | 制漿造紙專業設備安裝工程施工質量驗收規范 | () |
| SDJ 280-1990(2005) | 電力建設施工及驗收技術規范(水工結構工程篇) | () |
| SDJ 69-1987(2005) | 電力建設施工及驗收技術規范(建筑工程篇) | () |
| SH 3501 | 石油化工劇毒、可燃介質管道工程施工及驗收規范 | () |
| SH 3533 | 石油化工給水排水管道工程施工及驗收規范 | () |
| SH 3534 | 石油化工筑爐工程施工及驗收規范 | () |
| SH/T 0317-1992(2003) | 石油產品試驗用瓷制器皿驗收技術條件 | () |
| SH/T 3064 | 石油化工鋼制通用閥門選用、檢驗及驗收 | () |
| SH/T 3135 | 石油化工混凝土水池工程施工及驗收規范 | () |
| SH/T 3506 | 管式爐安裝工程施工及驗收規范 | () |
| SH/T 3507 | 石油化工鋼結構工程施工及驗收規范 | () |
| SH/T 3528 | 石油化工鋼儲罐地基與基礎施工及驗收規范 | () |
| SH/T 3529 | 石油化工廠區豎向工程施工及驗收規范 | () |
| SH/T 3532 | 石油化工換熱設備施工及驗收規范 | () |
| SH/T 3538 | 石油化工機器設備安裝工程施工及驗收通用規范 | () |
| SH/T 3539 | 石油化工離心式壓縮機組施工及驗收規范 | () |
| SH/T 3540 | 鋼制換熱設備管束復合涂層施工及驗收規范 | () |
| SH/T 3541 | 石油化工泵組施工及驗收規范 | () |
| SH/T 3904 | 石油化工建設工程項目竣工驗收規定 | () |
| SY 0401 | 輸油輸氣管道線路工程施工及驗收規范 | () |
| SY 0402 | 石油天然氣站內工藝管道工程施工及驗收規范 | () |
| SY 0466 | 天然氣集輸管道施工及驗收規范 | () |
| SY 0466-1997(2005) | 天然氣集輸管道施工及驗收規范 | () |
| SY 0470 | 石油天然氣管道跨越工程施工及驗收規范 | () |
| SY 4200 | 石油天然氣建設工程施工質量驗收規范 通則 | Code for quality acceptance of oil and gas construction engineering General rule |
| SY 4201.1 | 石油天然氣建設工程施工質量驗收規范 設備安裝工程 第1部分：機泵類設備 | Code for quality acceptance of oil and gas construction engineering Equipment installation engineering Part 1:Mechanism and pump device |
| SY 4201.2 | 石油天然氣建設工程施工質量驗收規范 設備安裝工程 第2部分：塔類設備 | Code for quality acceptance of oil and gas construction engineering Equipment installation engineering Part 2:Tower device |
| SY 4201.3 | 石油天然氣建設工程施工質量驗收規范 設備安裝工程 第3部分：容器類設備 | Code for quality acceptance of oil and gas construction engineering Equipment installation engineering Part 3:Container equipments |
| SY 4201.4 | 石油天然氣建設工程施工質量驗收規范 設備安裝工程 第4部分：爐類設備 | Code for quality acceptance of oil and gas construction engineering Equipment installation engineering Part 4:Boiler device |
| SY 4202 | 石油天然氣建設工程施工質量驗收規范 儲罐工程 | Code for quality acceptance of oil and gas construction engineering storage tank project |
| SY 4203 | 石油天然氣建設工程施工質量驗收規范 站內工藝管道工程 | Code for quality acceptance of oil and gas construction engineering station procedure pipeline project |
| SY 4204 | 石油天然氣建設工程施工質量驗收規范 油氣田集輸管道工程 | Code for quality acceptance of oil and gas construction engineering oil-gas field gathering and transportation pipeline engineering |
| SY 4205 | 石油天然氣建設工程施工質量驗收規范 自動化儀表工程 | Code for quality acceptance of oil and gas construction engineering automation instrumentation engineering |
| SY 4206 | 石油天然氣建設工程施工質量驗收規范 電氣工程 | Code for quality acceptance of oil and gas construction engineering |
| SY 4207 | 石油天然氣建設工程施工質量驗收規范 管道穿跨越工程 | Code for quality acceptance of oil and gas construction engineering pipeline crossing and aerial crossing engineering |
| SY/T 0323 | 玻璃纖維增強熱固性樹脂壓力管道施工及驗收規范 | () |
| SY/T 0324 | 直埋式鋼質高溫管道保溫預制施工驗收規范 | () |
| SY/T 0403 | 輸油泵組施工及驗收規范 | () |
| SY/T 0403-1998(2006年確認) | 輸油泵組施工及驗收規范 | () |
| SY/T 0404 | 加熱爐工程施工及驗收規范 | () |
| SY/T 0408 | 抽油機安裝工程施工及驗收規范 | () |
| SY/T 0419-1997(2005) | 油田專用水套加熱爐制造、安裝及驗收規范 | () |
| SY/T 0422-1997(2005) | 油田集輸管道施工及驗收規范 | () |
| SY/T 0448-1997(2005) | 油田油氣處理用鋼制壓力容器施工及驗收規范 | () |
| SY/T 0449-1997(2005) | 油氣田用鋼制常壓容器施工及驗收規范 | () |
| SY/T 0460 | 天然氣凈化裝置設備與管道安裝工程施工及驗收規范 | () |
| SY/T 4079 | 石油天然氣管道穿越工程施工及驗收規范 | () |
| SY/T 4108 | 輸油（氣）管道同溝敷設光纜（硅芯管）設計、施工及驗收規范 | () |
| SY/T 5954 | 開鉆前驗收項目及要求 | () |
| SY/T 6334-1997(2005) | 油、水井酸化設計與施工驗收規范 | () |
| SY/T 6680 | 石油鉆機和修井機出廠驗收規范 | Acceptance specification for petroleum drilling and servicing rigs |
| SYJ 4006-1990(2005) | 長輸管道陰極保護工程施工及驗收規范 | () |
| SYJ 4040 | 工業燃?xì)廨啓C安裝施工及驗收規范 | () |
| WB/T 1016 | 木地板鋪設面層驗收規范 | () |
| YB 4147 | 冶金建筑工程施工質量驗收規范 | () |
| YB 9010-1998(2006年確認) | 巖土工程驗收和質量評定標準 | () |
| YB 9250 | 帶肋鋼筋擠壓連接技術及驗收規程 | () |
| YB/T 4016-1991(2006年確認) | 玻璃窯用耐火制品抽樣和驗收方法 | () |
| YB/T 9008-1998(2006年確認) | 工程測量成果檢查驗收和質量評定標準 | () |
| YB/T 9009-1998(2006年確認) | 巖土工程勘察結檢查驗收和質量評定標準 | () |
| YB/T 9033-1998(2006年確認) | 供水水文地質勘察和供水管井工程檢查驗收和質量評定標準 | () |
| YBJ 207 | 冶金設備安裝工程質量驗收規范（液壓、氣動、潤滑設備系統） | () |
| YBJ 215 | YJ呋喃樹脂材料防腐蝕工程及驗收規程 | () |
| YBJ 217 | 冶金電氣設備安裝工程質量驗收規范 | () |
| YBJ 25 | 強夯設計施工及驗收規程 | () |
| YS/T 114-1992(2005) | 有色金屬企業能量平衡、電能平衡測試驗收標準 | () |
| 編號 | 中文名稱 | 英文名稱 |