微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| IEC 60051-3 AMD 1 | 直接作用模擬指示電測量儀表及其附件 第3部分:功率表和無功功率表的特殊要求 修改1 | Direct acting indicating analogue electrical-measuring instruments and their accessories - Part 3: Special requirements for wattmeters and varmeters; Amendment 1 |
| IEC 60051-3 | 直接作用模擬指示電測量儀表及其附件 第3部分:功率表和無功功率表的特殊要求 | Direct acting indicating analogue electrical measuring instruments and their accessories. Part 3 : Special requirements for wattmeters and varmeters |
| IEC 60051-5 | 直接作用模擬指示電測量儀表及其附件 第5部分:相位表、功率因數表和同步指示器的特殊要求 | Direct acting indicating analogue electrical measuring instruments and their accessories. Part 5: Special requirements for phase meters, power factor meters and synchroscopes. |
| IEC 60072-1 | 旋轉電機的尺寸及功率等級 第1部分:機座號:56～400、凸緣號:55～1080 | Dimensions and output series for rotating electrical machines; part 1: frame numbers 56 to 400 and flange numbers 55 to 1080 |
| IEC 60072-2 | 旋轉電機的尺寸及功率等級 第2部分:機座號:355～1000、凸緣號:1180～2360 | Dimensions and output series for rotating electrical machines; part 2: frame numbers 355 to 1000 and flange numbers 1180 to 2360 |
| IEC 60072-3 | 旋轉電機的尺寸及功率等級 第3部分:內裝式小功率電機、凸緣號:BF10～BF50 | Dimensions and output series for rotating electrical machines; part 3: small built-in motors; flange numbers BF10 to BF50 |
| IEC 60115-2-1 | 電子設備用固定電阻器 第2-1部分:空白詳細規范:低功率非線繞固定電阻器 評定水平E | Sectional specification : Fixed resistor networks in which not all resistors are individually measurable. Part 2 : Sectional specification: Fixed low-power non-wirewound resistors. Blank detail specification: Fixed low-power non-wirewound resistors. Assessment level E |
| IEC 60115-2 | 電子設備用固定電阻器 第2部分:分規范:低功率非線繞固定電阻器 | Sectional specification : Fixed resistor networks in which not all resistors are individually measurable. Part 2 : Sectional specification: Fixed low-power non-wirewound resistors |
| IEC 60115-2-2 | 電子設備用固定電阻器 第2-2部分:空白詳細規范:低功率非線繞固定電阻器 評定水平F | Fixed resistors for use in electronic equipment; part 2: blank detail specification: fixed low-power non-wirewound resistors; assessment level F |
| IEC 60115-4 AMD 1 | 電子設備用固定電阻器 第4部分:分規范:功率型固定電阻器 評定水平E 修改1 | Fixed resistors for use in electronic equipment; part 4: sectional specification: fixed power resistors; amendment 1 |
| IEC 60115-4-1 AMD 1 | 電子設備用固定電阻器 第4-1部分:詳細規范:功率型固定電阻器 評定水平E 修改1 | Fixed resistors for use in electronic equipment; part 4: blank detail specification: fixed power resistors; assessment level E; amendment 1 |
| IEC 60115-4-1 | 電子設備用固定電阻器 第4-1部分:空白詳細規范:功率型固定電阻器 評定水平E | Sectional specification : Fixed resistor networks in which not all resistors are individually measurable. Part 4 : Sectional specification: Fixed power resistors. Blank detail specification: Fixed power resistors. Assessment level E |
| IEC 60115-4-101 | 電子設備用固定電阻器 第4-101部分:詳細規范:軸向引線的線繞功率型固定電阻器 穩定度等級5% 評定水平E | Fixed resistors for use in electronic equipment - Part 4: Detail specification: Fixed power wirewound resistors with solderable axial wire leads - Stability class 5% - Assessment level E |
| IEC 60115-4-102 | 電子設備用固定電阻器 第4-102部分:詳細規范:軸向引線的線繞功率型固定電阻器 穩定度等級1% 評定水平E | Fixed resistors for use in electronic equipment - Part 4: Detail specification: Fixed power wirewound resistors with solderable axial wire leads - Stability class 1% - Assessment level E |
| IEC 60115-4 | 電子設備用固定電阻器 第4部分:分規范:功率型固定電阻器 | Sectional specification : Fixed resistor networks in which not all resistors are individually measurable. Part 4 : Sectional specification: Fixed power resistors |
| IEC 60115-4-2 | 電子設備用固定電阻器 第4-2部分:空白詳細規范:功率型固定電阻器 評定水平F | Fixed resistors for use in electronic equipment; part 4: blank detail specification: fixed power resistors; assessment level F |
| IEC 60115-4-3 | 電子設備用固定電阻器 第4-3部分:空白詳細規范:帶散熱的功率型固定電阻器 評定水平H | Fixed resistors for use in electronic equipment; part 4: blank detail specification: fixed power resistors, heat-sink types; assessment level H |
| IEC 60151-10 | 電子管電性能的測量 第10部分:音頻輸出功率和失真的測量方法 | Measurements of the electrical properties of electronic tubes. Part 10 : Methods of measurement of audio-frequency output power and distortion |
| IEC 60151-11 | 電子管電性能的測量 第11部分:射頻輸出功率的測量方法 | Measurements of the electrical properties of electronic tubes. Part 11 : Methods of measurement of radiofrequency output power |
| IEC 60235-5 | 微波管電性能的測量 第5部分:小功率振蕩速調管 | Measurement of the electrical properties of microwave tubes. Part 5 : Low-power oscillator klystrons |
| IEC 60235-6 | 微波管電性能的測量 第6部分:大功率速調管 | Measurement of the electrical properties of microwave tubes. Part 6 : High-power klystrons |
| IEC 60244-2 AMD 1 | 無線電發射機的測量方法 第2部分:帶寬、帶外功率和非本振功率 修改1 | Methods of measurement for radio transmitters. Part 2 : Bandwidth, out-of-band power and power of non-essential oscillations |
| IEC 60244-2 | 無線電發射機的測量方法 第2部分:帶寬、帶外功率和非本振功率 | Methods of measurement for radio transmitters. Part 2 : Bandwidth, out-of-band power and power of non-essential oscillations |
| IEC 60244-2A AMD 1 | 無線電發射機的測量方法 第2部分:帶寬、帶外功率和非本振功率 補充1:附錄 修改1 | Methods of measurement for radio transmitters. Part 2 : Bandwidth, out-of-band power and power of non-essential oscillations. First supplement: Appendices |
| IEC 60244-2A | 無線電發射機的測量方法 第2部分:帶寬、帶外功率和非本振功率 補充1:附錄 | Methods of measurement for radio transmitters. Part 2 : Bandwidth, out-of-band power and power of non-essential oscillations. First supplement: Appendices |
| IEC 60244-2B | 無線電發射機的測量方法 第2部分:帶寬、帶外功率和非主振功率 補充2:用于電話及聲音廣播發射機的帶寬及帶外 | Methods of measurement for radio transmitters. Part 2 : Bandwidth, out-of-band power and power of non-essential oscillations. Second supplement: Modulating signals for the measurement of bandwidth and out-of-band power of transmitters for telephony and sound broadcasting |
| IEC 60255-12 | 電氣繼電器 第12部分:兩個輸入激勵量的方向繼電器和功率繼電器 | Electrical relays. Part 12 : Directional relays and power relays with two input energizing quantities |
| IEC 60268-16 | 聲系統設備.第16部分:用語音傳輸系數測定語音清晰度的目標額定功率 | Sound system equipment - Part 16: Objective rating of speech intelligibility by speech transmission index |
| IEC 60393-4-1 | 電子設備用電位器 第4-1部分:空白詳細規范:單圈旋轉功率電位器 評定水平E | Potentiometers for use in electronic equipment; part 4: blank detail specification: singel-turn rotary power potentiometers; assessment level E |
| IEC 60393-4 | 電子設備用電位器 第4部分:分規范:單圈旋轉功率電位器 | Potentiometers for use in electronic equipment; part 4: sectional specification: single-turn rotary power potentiometers |
| IEC 60393-4-2 | 電子設備用電位器 第4-2部分:空白詳細規范:單圈旋轉功率電位器 評定水平F | Potentiometers for use in electronic equipment; part 4: blank detail specification: singel-turn rotary power potentiometers; assessment level F |
| IEC 60393-5-1 | 電子設備用電位器 第5-1部分:空白詳細規范:單圈旋轉低功率電位器 評定水平E | Potentiometers for use in electronic equipment; part 5: blank detail specification: singel-turn rotary low-power potentiometers; assessment level E |
| IEC 60393-5 | 電子設備用電位器 第5部分:分規范:單圈旋轉線繞和非線繞低功率電位器 | Potentiometers for use in electronic equipment; part 5: sectional specification: single-turn rotary low-power wirewound and non-wirewound potentiometers |
| IEC 60393-5-2 | 電子設備用電位器 第5-2部分:空白詳細規范:單圈旋轉低功率電位器 評定水平F | Potentiometers for use in electronic equipment; part 5: blank detail specification: singel-turn rotary low-power potentiometers; assessment level F |
| IEC 60510-2-7 | 衛星地面站用無線電設備的測量方法 第2部分:分系統測量 第7節:大功率放大器 | Methods of measurement for radio equipment used in satellite earth stations; part 2: measurements for sub-systems; section seven, high-power amplifier |
| IEC 60681-1 | 專用小功率電動機的尺寸 第1部分:燃油器電動機 | Dimensions of small power motors for definite purpose application. Part 1 : Oil burner motors |
| IEC 60747-8-2 | 半導體器件 分立器件 第8部分:場效應晶體管 第2節:外殼額定功率放大場效應晶體管空白詳細規范 | Semicoductor devices; discrete devices; part 8: field-effect transistors; section 2: blank detail specification for field-effect transistors for case-rated power amplifier applications |
| IEC 60835-3-6 | 數字微波無線電傳輸系統使用設備的測量方法 第3部分:衛星地面站的測量 第6節:大功率放大器 | Methods of measurement for equipment used in digital microwave transmission systems - Part 3: Measurements on satellite earth stations - Section 6: High-power amplifiers |
| IEC 61000-2-13 | 電磁兼容性(EMC) 第2-13部分:環境.輻射和傳導的大功率電磁(HEMP)環境 | Electromagnetic compatibility (EMC) - Part 2-13: Environment - High-power electromagnetic (HPEM) environments, radiated and conducted |
| IEC 61000-4-13 | 電磁兼容性.第4-13部分:試驗和測量技術.包括交流電功率點主要信號的低頻抗擾試驗諧波和中間諧波 | Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques; Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests |
| IEC 61000-4-17 Edition 1.1 | 電磁兼容性(EMC).第4-17部分:試驗和測量技術.直流電流輸入功率點通道.干擾試驗 | Electromagnetic compatibility (EMC) - Part 4-17: Testing and measuring techniques; Ripple on d.c. input power port immunity test |
| IEC 61000-4-30 | 電磁兼容性(EMC).第4-32部分:試驗和測量技術.功率質量測量方法 | Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques; Power quality measurement methods |
| IEC 61040 | 激光輻射用功率和能量測量探測器、儀器和設備 | Power and energy measuring detectors, instruments and equipment for laser radiation |
| IEC 61123 | 可靠性試驗 成功率驗證試驗方案 | Reliability testing; compliance test plans for success ratio |
| IEC 61161 | 0.5MHz～25MHz頻率范圍內液體中超聲波功率測量 | Ultrasonic power measurement in liquids in the frequency range 0,5 MHz to 25 MHz |
| IEC 61280-1-1 | 纖維光學通信子系統基本試驗程序 第1-1部分:一般通信子系統試驗程序 單模光纜發射器光輸出功率測量 | Fibre optic communication subsystem basic test procedures - Part 1-1: Test procedures for general communication subsystems - Transmitter output optical power measurement for single-mode optical fibre cable |
| IEC 61290-1-2 | 光學放大器.試驗方法.第1-2部分:光功率參數和增益參數.電頻譜分析儀法 | Optical amplifiers - Test methods - Part 1-2: Power and gain parameters - Electrical spectrum analyzer method |
| IEC 61290-1-3 | 光學放大器.試驗方法.第1-3部分:光功率參數和增益參數.光功率計法 | Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method |
| IEC 61290-7-1 | 光學纖維放大器 基礎規范 第7-1部分:頻帶外插入損耗的測量方法 濾波光功率計 | Optical fibre amplifiers - Basic specification - Part 7-1: Test methods for out-of-band insertion losses - Filtered optical power meter |
| IEC 61300-2-14 | 纖維光學互連器件和無源元件.基本試驗和測量程序.第2-14部分:試驗.光學功率控制和損壞閾特性 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-14: Tests - Optical power handling and damage threshold characterization |
| IEC 61300-3-31 | 光纖互連裝置和無源部件.基本試驗和測量程序.第3-34部分:檢驗和測量.纖維光學源的耦合功率比測量 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-31: Examinations and measurements; Coupled power ratio measurement for fibre optic sources |
| IEC 61307 | 工業微波加熱設備 測定輸出功率的試驗方法 | Industrial microwave heating installations - Test methods for the determination of power output |
| IEC 61308 | 高頻電介質加熱設備.測定輸出功率的試驗方法 | High-frequency dielectric heating installations - Test methods for the determination of power output |
| IEC 61315 | 纖維光學功率計校準 | Calibration of fibre optic power meters |
| IEC 61400-21 | 風輪發電機系統 第21部分：管道連接風輪機功率質量特性的測量和評定 | Wind turbine generator systems - Part 21: Measurement and assessment of power quality characteristics of grid connected wind turbines |
| IEC 61523-2 | 延遲計算和功率計算標準.第2部分:互補金屬氧化物半導體(CMOS)專用集成電路(ASIC)程序庫用配套延遲計算規范 | Delay and power calculation standards - Part 2: Pre-layout delay calculation specification for CMOS ASIC libraries |
| IEC 61580-8 | 波導測量方法 第8部分:波導功率容量 | Methods of measurement for waveguides - Part 8: Waveguide power holding capability |
| IEC 61683 | 光伏系統 功率調節器 效率測量程序 | Photovoltaic systems - Power conditioners - Procedure for measuring efficiency |
| IEC 61803 Corrigendum 1 | 高壓直流(HVDC)變流站功率損失的測定 | Determination of power losses in high-voltage direct current (HVDC) converter stations |
| IEC 61803 | 高壓直流(HVDC)變流站功率損失的測定 | Determination of power losses in high-voltage direct current (HVDC) converter stations |
| IEC 61922 | 高頻感應加熱裝置.測定發生器功率輸出的試驗方法 | High-frequency induction heating installations - Test methods for the determination of power output of the generator |
| IEC 61954 Corrigendum 1 | 輸電和配電系統用電力電子設備.靜態無功功率補償器用晶閘管閥的試驗 | Power electronics for electrical transmission and distribution systems - Testing of thyristor valves for static VAR compensators |
| IEC 61954 | 輸電和配電系統用電力電子設備 靜態無功功率補償器用晶閘管閥的試驗 | Power electronics for electrical transmission and distribution systems - Testing of thyristor valves for static VAR compensators |
| IEC 62018 | 信息技術設備的功率消耗.測量方法 | Power consumption of information technology equipment - Measurement methods |
| IEC 62087 | 聲頻、視頻和相關設備功率消耗量的測量方法 | Methods of measurement for the power consumption of audio, video and related equipment |
| IEC 62132-4 | 集成電路.150kHz-1GHz電磁抗擾度的測量.第4部分:直接射頻功率注入法 | Integrated circuits - Measurement of electromagnetic immunity 150 kHz to 1 GHz - Part 4: Direct RF power injection method |
| IEC/TR 62271-308 | 高壓開關設備和控制設備.第308部分:不對稱短路試驗功率T100a指南 | High-voltage switchgear and controlgear - Part 308: Guide for asymmetrical short-circuit breaking test duty T100a |
| IEC/TS 61400-14 | 風輪機.第14部分:表面聲功率級和音調值聲明 | Wind turbines - Part 14: Declaration of apparent sound power level and tonality values |
| 編號 | 中文名稱 | 英文名稱 |