微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| IEC 61340-4-4 | 靜電學.第4-4部分:專用的標準試驗方法.柔性中間散貨集裝箱(FIBC)的靜電學分類 | Electrostatics - Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC) |
| ISO 10327 | 航空器 航空貨運用合格的航空集裝箱 規范和試驗 | Aircraft - Certified aircraft container for air cargo - Specification and testing |
| ISO 10368 | 貨物保溫集裝箱.遠程調節監控 | Freight thermal containers - Remote condition monitoring |
| ISO 10374 AMD 1 | 集裝箱 自動識別 修改1 | Freight containers - Automatic identification; Amendment 1 |
| ISO 10374 | 集裝箱 自動識別 | Freight containers; automatic identification |
| ISO 10525 | 6m及6m以上長度平衡重式貨運集裝箱搬運車 附加穩定性試驗 | Counterbalanced trucks handling freight containers of 6 m (20 ft) length and above - Additional stability tests |
| ISO 11242 | 航空器 貨運集裝箱壓力均衡要求 | Aircraft - Pressure equalization requirements for cargo containers |
| ISO 1161 AMD 1 | 貨運集裝箱系列1.角配件.規范.修改件1:45ft集裝箱 | Series 1 freight containers - Corner fittings - Specification; Amendment 1: 45 ft containers |
| ISO 1161 Technical Corrigendum 1 | 系列1集裝箱 角件 技術要求 技術勘誤1 | Series 1 freight containers; corner fittings; specification; technical corrigendum 1 |
| ISO 1161 | 系列1集裝箱 角件 技術要求 | Series 1 freight containers; Corner fittings; Specification |
| ISO 13562-2 | 伸縮臂式工業車輛 第2部分:6m及以上長度貨運集裝箱叉車附加穩定性試驗 | Industrial variable-reach trucks - Part 2: Additional stability tests for trucks handling freight containers of 6 m length and above |
| ISO 13563-2 | 單邊負載叉車 第2部分：搬運6m及以上長度集裝箱的叉車的附加穩定性試驗 | Single side loading fork-lift trucks - Part 2: Additional stability tests for trucks handling freight containers of 6 m length and above |
| ISO 14829 | 貨運集裝箱.貨運集裝箱搬運用跨運車.穩定性的計算 | Freight containers - Straddle carriers for freight container handling - Calculation of stability |
| ISO 1496-1 AMD 1 | 系列1集裝箱 技術要求與試驗 第1部分:一般用途通用貨物集裝箱 修改1:1AAA和1BBB型集裝箱 | Series 1 freight containers; specification and testing; part 1: general cargo containers for general purposes; amendment 1: 1AAA and 1BBB containers |
| ISO 1496-1 AMD 2 | 系列1集裝箱 技術要求與試驗 第1部分:一般用途通用貨物集裝箱 修改2 | Series 1 freight containers - Specification and testing - Part 1: General cargo containers for general purpose; Amendment 2 |
| ISO 1496-1 AMD 3 | 系列1集裝箱.規范和試驗.第1部分:一般用途通用貨物集裝箱.修改件3 | Series 1 freight containers - Specification and testing - Part 1: General cargo containers for general purposes; Amendment 3 |
| ISO 1496-1 AMD 4 | 系列1貨運集裝箱.規范和試驗.第1部分:一般用途的貨運集裝箱.修改件4 | Series 1 freight containers - Specification and testing - Part 1: General cargo containers for general purposes; Amendment 4 |
| ISO 1496-1 AMD 5 | 系列1集裝箱.技術要求與試驗.第1部分:一般用途通用貨物集裝箱.修改件5:門端安全性 | Series 1 freight containers - Specification and testing - Part 1: General cargo containers for general purposes; Amendment 5: Door end security |
| ISO 1496-1 | 系列1集裝箱 技術要求與試驗 第1部分:一般用途通用貨物集裝箱 | Series 1 freight containers; specification and testing; part 1: general cargo containers for general purposes |
| ISO 1496-2 AMD 1 | 系列1集裝箱.技術要求與試驗.第2部分:保溫集裝箱.修改件1 | Series 1 freight containers - Specification and testing - Part 2: Thermal containers; Amendment 1 |
| ISO 1496-2 Technical Corrigendum 1 | 系列1集裝箱.技術要求與測試.第2部分:保溫集裝箱.技術勘誤1 | Series 1 freight containers - Specification and testing - Part 2: Thermal containers; Technical Corrigendum 1 |
| ISO 1496-2 | 系列1集裝箱 技術要求與試驗 第2部分:保溫集裝箱 | Series 1 freight containers - Specification and testing - Part 2: Thermal containers |
| ISO 1496-3 AMD 1 | 貨運集裝箱系列1.規范和試驗.第3部分:液體、氣體和加壓的干散料用液罐集裝箱.修改件1:外部限制(縱向)動態試 | Series 1 freight containers - Specification and testing - Part 3: Tank containers for liquids, gases and pressurized dry bulk; Amendment 1: Testing of the external restraint (longitudinal) dynamic |
| ISO 1496-3 | 系列1集裝箱 技術要求與試驗 第3部分:液體、氣體及加壓干散貨用罐式集裝箱 | Series 1 freight containers - Specification and testing - Part 3: Tank containers for liquids, gases and pressurized dry bulk |
| ISO 1496-4 AMD 1 | 系列1集裝箱 技術要求與試驗 第4部分:無壓干散貨集裝箱 修改1:1AAA和1BBB型集裝箱 | Series 1 freight containers - Specification and testing - Part 4: Non-pressurized containers for dry bulk; Amendment 1: 1AAA and 1BBB containers |
| ISO 1496-4 Technical Corrigendum 1 | 系列1集裝箱.技術要求與試驗.第4部分:不加壓的干散料集裝箱 | Series 1 freight containers - Specification and testing - Part 4: Non-pressurized containers for dry bulk |
| ISO 1496-4 | 系列1集裝箱 技術要求與試驗 第4部分:無壓干散貨集裝箱 | Series 1 freight containers; specification and testing; part 4: non-pressurized containers for dry bulk |
| ISO 1496-5 AMD 1 | 系列1集裝箱 技術要求與試驗 第5部分:平臺式和臺架式集裝箱 修改1 | Series 1 freight containers; specification and testing; part 5: platform and platform-based containers; amendment 1: 1AAA and 1BBB containers |
| ISO 1496-5 AMD 2 | 貨運集裝箱系列1.規范和試驗.第5部分:平臺式和臺架式集裝箱.修改件2 | Serie 1 freight containers - Specification and testing - Part 5: Platform and platform-based containers; Amendment 2 |
| ISO 1496-5 | 系列1集裝箱 技術要求與試驗 第5部分:平臺式和臺架式集裝箱 | Series 1 freight containers; specification and testing; part 5: platform and platform-based containers |
| ISO 15871 | 工業車輛 集裝箱搬運和抓斗臂操作用指示燈規范 | Industrial trucks - Specification for indicator lights for container handling and grappler arm operations |
| ISO 17363 | RFID供應鏈應用.貨運集裝箱 | Supply chain applications of RFID - Freight containers |
| ISO 18185-1 | 貨運集裝箱.電子密封.第1部分:通信協議 | Freight containers - Electronic seals - Part 1: Communication protocol |
| ISO 18185-2 | 貨運集裝箱.電子密封.第2部分:應用要求 | Freight containers - Electronic seals - Part 2: Application requirements |
| ISO 18185-3 | 貨運集裝箱.電子密封.第3部分:環境特征 | Freight containers - Electronic seals - Part 3: Environmental characteristics |
| ISO 18185-4 | 貨運集裝箱.電子密封.第4部分:數據保護 | Freight containers - Electronic seals - Part 4: Data protection |
| ISO 18185-5 | 貨運集裝箱.電子密封.第5部分:物理層 | Freight containers - Electronic seals - Part 5: Physical layer |
| ISO 21898 | 包裝.非危險貨物用軟的過渡性散貨集裝箱 | Packaging - Flexible intermediate bulk containers (FIBCs) for non-dangerous goods |
| ISO 2308 | 起重能力30噸以下的貨運集裝箱吊鉤 基本要求 | Hooks for lifting freight containers of up to 30 tonnes capacity; Basic requirements |
| ISO 3874 AMD 1 | 系列1集裝箱 裝卸與加固 修改1 | Series 1 freight containers - Handling and securing; Amendment 1: Twistlocks, latchlocks, stacking fittings and lashing rod systems for securing of containers |
| ISO 3874 AMD 2 | 貨運集裝箱系列1.搬運和固定.第2次修改:1AAA和1BBB集裝箱 | Series 1 freight containers - Handling and securing; Amendment 2: Vertical tandem lifting |
| ISO 3874 AMD 3 | 系列1集裝箱.裝卸與加固.修改件3:雙垛軌道車操作 | Series 1 freight containers - Handling and securing; Amendment 3: Double stack rail car operations |
| ISO 3874 AMD 4 | 貨運集裝箱系列1.搬運和固定.修改件4:45ft集裝箱 | Series 1 freight containers - Handling and securing - Amendment 4: 45 ft Containers |
| ISO 3874 | 系列1集裝箱 裝卸與加固 | Series 1 freight containers - Handling and securing |
| ISO 4118 | 空運貨物.用于大容量飛行器底艙的非適航審定的集裝箱.規范和試驗 | Air cargo - Non-certified containers for the lower deck of large-capacity aircraft - Specification and testing |
| ISO 4128 | 航空器 按空運標準型式制造的集裝箱 | Aircraft; Air mode modular containers |
| ISO 6346 | 集裝箱 代碼、識別和標記 | Freight containers - Coding, identification and marking |
| ISO 6359 | 貨運集裝箱.數據摘要板 | Freight containers; Consolidated data plate |
| ISO 6517 | 航空貨運設備 大型飛機底艙專用并經合格審定的基座固定的集裝箱 | Air cargo equipment; base-restrained certified containers exclusively for the lower deck of high-capacity aircraft |
| ISO 668 AMD 1 | 貨運集裝箱系列1.分類、尺寸和容量.修改件1 | Series 1 freight containers - Classification, dimensions and ratings; Amendment 1 |
| ISO 668 AMD 2 | 貨運集裝箱系列1.分類、尺寸和額定容量.修改件2:45' 集裝箱 | Series 1 freight containers - Classification, dimensions and ratings; Amendment 2: 45' containers |
| ISO 668 | 系列1集裝箱 分類、尺寸和額定值 | Series 1 freight containers - Classification, dimensions and ratings |
| ISO 6965 | 航空器 裝吊航空貨運集裝箱和大件貨物的自行式龍門起重機 功能要求 | Aircraft; Self-propelled gantry for lifting air cargo containers and outsize cargoes; Functional requirements |
| ISO 8058 | 航空貨運 隔熱集裝箱 熱效率要求 | Air cargo - Insulated container - Thermal efficiency requirements |
| ISO 830 Technical Corrigendum 1 | 集裝箱 詞匯 兩種語言版 技術勘誤1 | Freight containers - Vocabulary; Technical corrigendum 1 |
| ISO 830 | 集裝箱.詞匯 | Freight containers - Vocabulary |
| ISO 8323 | 集裝箱 空/陸/水(聯運)通用集裝箱 技術要求與試驗 | Freight containers; Air/surface (intermodal) general purpose containers; Specification and tests |
| ISO 9669 AMD 1 | 系列1集裝箱 罐式集裝箱接口 修改1:3節和4節 | Series 1 freight containers; interface connections for tank containers; amendment 1: sections 3 and 4 |
| ISO 9669 | 系列1集裝箱 罐式集裝箱接口 | Series 1 freight containers; interface connections for tank containers |
| ISO 9711-1 | 集裝箱 與船載集裝箱有關的信息 第1部分:箱位坐標 | Freight containers; information related to containers on board vessels; part 1: bay plan system |
| ISO 9897 Technical Corrigendum 1 | 集裝箱 集裝箱設備的數據交換(CECEX):一般通訊代碼 技術勘誤1 | Freight containers - Container equipment data exchange (CEDEX) - General communication codes; Technical Corrigendum 1 |
| ISO 9897 | 集裝箱 集裝箱設備的數據交換(CECEX):一般通訊代碼 | Freight containers - Container equipment data exchange (CEDEX) - General communication codes |
| ISO/PAS 17712 | 貨運集裝箱.機械密封 | Freight containers - Mechanical seals |
| ISO/TR 15069 | 系列1集裝箱 裝卸與加固 ISO 3874 附錄A的基本原理 | Series 1 freight containers - Handling and securing - Rationale for ISO 3874 Annex A |
| ISO/TR 15070 AMD 1 | 系列1集裝箱 結構檢驗標準的基本原理.修改件1:結構一體化指南 | Series 1 freight containers - Rationale for structural test criteria; Amendment 1: Guidance on structural integrity |
| ISO/TR 15070 AMD 2 | 貨運集裝箱系列1.結構試驗標準的基本原理.修改件2 | Series 1 freight containers - Rationale for structural test criteria; Amendment 2 |
| ISO/TR 15070 | 系列1集裝箱 結構檢驗標準的基本原理 | Series 1 freight containers - Rationale for structural test criteria |
| 編號 | 中文名稱 | 英文名稱 |