微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| EN ISO 2566-1 | 鋼伸長值的換算 第1部分：碳素鋼和低合金鋼 | Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984) |
| ISO 10142 | 鋁生產用碳素材料 煅燒焦 用實驗室振動磨測定粒度穩定性 | Carbonaceous materials for use in the production of aluminium - Calcined coke - Determination of grain stability using a laboratory vibration mill |
| ISO 10143 | 鋁生產用碳素材料 電極用煅燒焦 顆粒電阻率的測定 | Carbonaceous materials for the production of aluminium - Calcined coke for electrodes - Determination of the electrical resistivity of granules |
| ISO 10236 | 鋁生產用碳素材料 電極用生焦和煅燒焦 松(緊裝)密度的測定 | Carbonaceous materials for the production of aluminium - Green coke and calcined coke for electrodes - Determination of bulk density (tapped) |
| ISO 10237 | 鋁生產用碳素材料 煅燒焦 殘余氫含量的測定 | Carbonaceous materials for use in the production of aluminium - Calcined coke - Determination of residual-hydrogen content |
| ISO 10238 | 鋁生產用碳素材料 電極用瀝青 儀器法測定硫含量 | Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Determination of sulfur content by an instrumental method |
| ISO 10384 | 用化學結構定義的熱軋?zhí)妓劁摪? | Hot-rolled carbon steel sheet as defined by chemical composition |
| ISO 10460 | 儲氣瓶.焊接的碳素鋼儲氣瓶.定期檢驗和試驗 | Gas cylinders - Welded carbon-steel gas cylinders - Periodic inspection and testing |
| ISO 11412 | 鋁生產用碳素材料 煅燒焦 水分測定 | Carbonaceous materials for the production of aluminium - Calcined coke - Determination of water content |
| ISO 11713 | 鋁生產用碳素材料 陰極碳塊和焙燒陽極 室溫下電阻率的測定 | Carbonaceous materials used in the production of aluminium - Cathode blocks and baked anodes - Determination of electrical resistivity at ambient temperature |
| ISO 12977 | 鋁生產用碳素材料 電極用瀝青 揮發分的測定 | Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Determination of volatile matter content |
| ISO 12979 | 鋁生產用碳素材料 電極用瀝青 喹啉不溶物中C/H比的測定 | Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Determination of C/H ratio in the quinoline-insoluble fraction |
| ISO 12980 | 鋁生產用碳素材料 電極用生焦和煅燒焦 X射線熒光分析 | Carbonaceous materials used in the production of aluminium - Green coke and calcined coke for electrodes - Analysis using an X-ray fluorescence method |
| ISO 12981-1 | 鋁生產用碳素材料 煅燒焦 對二氧化碳反應性的測定 第1部分:失重法 | Carbonaceous materials used in the production of aluminium - Calcined coke; Determination of the reactivity to carbon dioxide - Part 1: Loss in mass method |
| ISO 12982-1 | 鋁生產用碳素材料 煅燒焦 對空氣反應性的測定 第1部分:灼燒溫度法 | Carbonaceous materials used in the production of aluminium - Calcined coke; Determination of the reactivity to air - Part 1: Ignition temperature method |
| ISO 12984 | 鋁生產用碳素材料 煅燒焦 粒度分布的測定 | Carbonaceous materials used in the production of aluminium - Calcined coke - Determination of particle size distribution |
| ISO 12985-1 | 鋁生產用碳素材料 焙燒陽極和陰極碳塊 第1部分:用尺寸法測定表觀密度 | Carbonaceous materials used in the production of aluminium - Baked anodes and cathode blocks - Part 1: Determination of apparent density using a dimensions method |
| ISO 12985-2 | 鋁生產用碳素材料 焙燒陽極和陰極碳塊 第2部分:用靜流法測定表觀密度和開口孔隙率 | Carbonaceous materials used in the production of aluminium - Baked anodes and cathode blocks - Part 2: Determination of apparent density and of open porosity using a hydrostatic method |
| ISO 12986-1 | 鋁生產用碳素材料 預焙陽極和陰極碳塊 第1部分:用三點法測定抗彎強度/剪切強度 | Carbonaceous materials used in the production of aluminium - Prebaked anodes and cathode blocks - Part 1: Determination of bending/shear strength by a three-point method |
| ISO 12986-2 | 鋁生產用碳素材料.預焙陽極和陰極碳塊.第2部分:用四點法測定抗彎強度 | Carbonaceous materials used in the production of aluminium - Prebaked anodes and cathode blocks - Part 2: Determination of flexural strength by the four-point method |
| ISO 12988-1 | 鋁生產用碳素材料 焙燒陽極 二氧化碳反應性的測定 第1部分:失重法 | Carbonaceous materials used in the production of aluminium - Baked anodes - Determination of the reactivity to carbon dioxide - Part 1: Loss in mass method |
| ISO 12988-2 | 鋁生產用碳素材料.焙燒陽極.二氧化碳反應性的測定.第2部分:熱解重量分析法 | Carbonaceous materials used in the production of aluminium - Baked anodes - Determination of the reactivity to carbon dioxide - Part 2: Thermogravimetric method |
| ISO 12989-1 | 鋁生產用碳素材料 焙燒陽極和部碳塊 空氣反應性的測定 第1部分:失重法 | Carbonaceous materials used in the production of aluminium - Baked anodes and sidewall blocks - Determination of the reactivity to air - Part 1: Loss in mass method |
| ISO 12989-2 | 鋁生產用碳素材料.焙燒陽極和部碳塊.空氣反應性的測定.第2部分:熱重分析法 | Carbonaceous materials used in the production of aluminium - Baked anodes and sidewall blocks - Determination of the reactivity to air - Part 2: Thermogravimetric method |
| ISO 14422 | 鋁生產用碳素材料 冷壓糊料 取樣方法 | Carbonaceous materials used in the production of aluminium - Cold-ramming pastes - Methods of sampling |
| ISO 14428 | 鋁生產用碳素材料.冷和微溫沖壓漿料.烘烤時的膨脹/收縮 | Carbonaceous materials for the production of aluminium - Cold and tepid ramming pastes - Expansion/shrinkage during baking |
| ISO 20203 | 鋁生產中使用的碳素材料.煅燒焦炭.用X-射線衍射法測定煅燒石油焦的晶體粒度 | Carbonaceous materials used in the production of aluminium - Calcined coke - Determination of crystallite size of calcined petroleum coke by X-ray diffraction |
| ISO 2566-1 | 鋼 伸長值的換算 第1部分:碳素鋼和低合金鋼 | Steel; Conversion of elongation values; Part 1 : Carbon and low alloy steels |
| ISO 3573 | 商品級和沖壓級熱軋?zhí)妓劁摫“? | Hot-rolled carbon steel sheet of commercial and drawing qualities |
| ISO 3574 | 商品級和沖壓級冷軋?zhí)妓劁摫“? | Cold-reduced carbon steel sheet of commercial and drawing qualities |
| ISO 3575 | 商品級和沖壓級連續熱鍍鋅碳素鋼薄板 | Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities |
| ISO 4960 | 碳含量大于0.25%的冷軋?zhí)妓劁搸? | Cold-reduced carbon steel strip with a carbon content over 0,25 % |
| ISO 4998 | 結構質量的連續熱浸鋅覆層碳素薄鋼板 | Continuous hot-dip zinc-coated carbon steel sheet of structural quality |
| ISO 4999 | 商用、拉制和建筑用連續熱鍍錫(鉛合金)冷軋?zhí)妓乇′摪? | Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities |
| ISO 5000 | 商品級及拉伸級連續熱浸鍍鋁-硅冷軋?zhí)妓劁摫“? | Continuous hot-dip aluminium-silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities |
| ISO 5001 | 玻璃搪瓷用冷軋?zhí)妓乇′摪? | Cold-reduced carbon steel sheet for vitreous enamelling |
| ISO 5002 | 商品級和沖壓級熱軋和冷軋電鍍鋅碳素薄鋼板 | Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities |
| ISO 5931 | 鋁生產用碳素材料 煅燒焦和煅燒碳產品 用艾氏卡法測定全硫含量 | Carbonaceous materials used in the production of aluminium - Calcined coke and calcined carbon products - Determination of total sulfur by the Eschka method |
| ISO 5939 | 鋁生產用碳素材料 電極用瀝青 水含量的測定 共沸蒸餾(Dean and Stark)法 | Carbonaceous materials for the production of aluminium; Pitch for electrodes; Determination of water content; Azeotropic distillation (Dean and Stark) method |
| ISO 5940 | 鋁生產用碳素材料 電極用瀝青 用環和球法測定軟化點 | Carbonaceous materials for the production of aluminium; Pitch for electrodes; Determination of softening point by the ring-and-ball method |
| ISO 5950 | 商品級和沖壓級連續電鍍錫冷軋?zhí)妓乇′摪? | Continuous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities |
| ISO 5954 | 按硬度要求冷軋?zhí)妓乇′摪? | Cold-reduced carbon steel sheet according to hardness requirements |
| ISO 6257 | 鋁生產用碳素材料.電極用瀝青.取樣 | Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Sampling |
| ISO 6317 | 商品級和沖壓級熱軋?zhí)妓劁搸? | Hot-rolled carbon steel strip of commercial and drawing qualities |
| ISO 6375 | 鋁生產用碳素材料 電極用焦 取樣 | Carbonaceous materials for the production of aluminium; Cokes for electrodes; Sampling |
| ISO 6376 | 鋁生產用碳素材料 電極用瀝青 甲苯不溶物含量的測定 | Carbonaceous materials for the production of aluminium; Pitch for electrodes; Determination of content of toluene-insoluble material |
| ISO 65 | 按照ISO 7/1 車螺紋的碳素鋼管 | Carbon steel tubes suitable for screwing in accordance with ISO 7/1 |
| ISO 6791 | 鋁生產用碳素材料 電極用瀝青 喹啉不溶物含量的測定 | Carbonaceous materials for the production of aluminium; Pitch for electrodes; Determination of contents of quinoline-insoluble material |
| ISO 6932 | 最高含碳量為0.25%的冷軋?zhí)妓劁搸? | Cold-reduced carbon steel strip with a maximum carbon content of 0,25 % |
| ISO 6997 | 鋁生產用碳素材料 煅燒焦 表觀油含量的測定 加熱法 | Carbonaceous materials for the production of aluminium; Calcined coke; Determination of apparent oil content ; Heating method |
| ISO 6998 Technical Corrigendum 1 | 鋁生產用碳素材料 電極用瀝青 焦化值的測定 技術勘誤1 | Carbonaceous materials for the production of aluminium - Pitch for electrodes - Determination of coking value; Technical Corrigendum 1 |
| ISO 6998 | 鋁生產用碳素材料 電極用瀝青 焦化值的測定 | Carbonaceous materials for the production of aluminium - Pitch for electrodes - Determination of coking value |
| ISO 6999 | 鋁生產用碳素材料 電極用瀝青 密度的測定 比重瓶法 | Carbonaceous materials for the production of aluminium; Pitch for electrodes; Determination of density; Pycnometric method |
| ISO 8003 | 鋁生產用碳素材料 電極用瀝青 動態粘度的測定 | Carbonaceous materials used in the production of aluminium; Pitch for electrodes; Measurement of dynamic viscosity |
| ISO 8004 | 鋁生產用碳素材料 煅燒焦和煅燒碳產品 二甲苯密度的測定 比重瓶法 | Carbonaceous materials for the production of aluminium; Calcined coke and calcined carbon products; Determination of the density in xylene; Pyknometric method |
| ISO 8005 | 鋁生產用碳素材料.生焦炭和煅燒焦炭.灰分含量的測定 | Carbonaceous materials used in the production of aluminium - Green and calcined coke - Determination of ash content |
| ISO 8006 | 鋁生產用碳素材料 電極用瀝青 灰分的測定 | Carbonaceous materials used in the production of aluminium; Pitch for electrodes; Determination of ash |
| ISO 8007-1 | 鋁生產用碳素材料 單個材料的取樣方案和取樣 第1部分:陰極塊 | Carbonaceous materials used in the production of aluminium - Sampling plans and sampling from individual units - Part 1: Cathode blocks |
| ISO 8007-2 | 鋁生產用碳素材料 單個材料的取樣方案和取樣 第2部分:預焙陽極 | Carbonaceous materials used in the production of aluminium - Sampling plans and sampling from individual units - Part 2: Prebaked anodes |
| ISO 8007-3 | 鋁生產用碳素材料.單個材料的取樣方案和取樣.第3部分:側墻磚 | Carbonaceous materials used in the production of aluminium - Sampling plans and sampling from individual units - Part 3: Sidewall blocks |
| ISO 8658 | 鋁生產用碳素材料 未煅燒和煅燒焦 火焰原子吸收光譜法測定痕量元素 | Carbonaceous materials for use in the production of aluminium - Green and calcined coke - Determination of trace elements by flame atomic absorption spectroscopy |
| ISO 8723 | 鋁生產用碳素材料 煅燒焦 油含量的測定 溶劑萃取法 | Carbonaceous materials for the production of aluminium; Calcined coke; Determination of oil content; Method by solvent extraction |
| ISO 9055 | 鋁生產用碳素材料 電極用瀝青 用氧彈法測定硫含量 | Carbonaceous materials for the production of aluminium; pitch for electrodes; determination of sulfur content by the bomb method |
| ISO 9088 | 鋁生產用碳素材料 預焙陽極和陰極塊 用比重瓶法測定二甲苯密度 | Carbonaceous materials used for the production of aluminium - Cathode blocks an prebacked anodes - Determination of the density in xylene by a pyknometric method |
| ISO 9406 | 鋁生產用碳素材料 焦碳 用重量分析法測定揮發物的含量 | Carbonaceous materials for the production of aluminium - Green coke - Determination of volatile matter content by gravimetric analysis |
| ISO/TS 14423 | 鋁生產用碳素材料 冷壓糊 通過喹啉萃取和測定聚焦體尺寸分布來測定有效粘接劑含量和聚焦體含量 | Carbonaceous materials used in the production of aluminium - Cold-ramming pastes - Determination of effective binder content and aggregate content by extraction with quinoline, and determination of aggregate size distribution |
| ISO/TS 14425 | 鋁生產用碳素材料 冷壓糊 未焙燒糊料的揮發物含量的測定 | Carbonaceous materials used in the production of aluminium - Cold-ramming pastes - Determination of volatile-matter content of unbaked pastes |
| prEN 2160 | 航空航天系列 飛行器控制用涂鋅碳素鋼軟鋼絲繩、結構、尺寸、負載 | Flexible wire ropes for aircraft controls in zinc coated carbon steel; construction, dimensions, loads; Aerospace series |
| 編號 | 中文名稱 | 英文名稱 |