微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| JIS A1204 | 土壤粒度分布的試驗方法 | Test method for particle size distribution of soils |
| JIS A1223 | 土壤細粒度級含量的試驗方法 | Test method for fine fraction content of soils |
| JIS B4130 | 金剛石/立方晶體氮化硼產品.金剛石或立方晶體氮化硼的粒度 | Diamond/CBN products -- Grain sizes of diamond or cubic boron nitride |
| JIS G0551 | 鋼.表觀粒度的顯微測定 | Steels -- Micrographic determination of the apparent grain size |
| JIS G1641 | 鐵合金粒度分析和粒度測定用取樣方法 | Methods of sampling for size analysis of ferroalloys and size determination |
| JIS G5904 | 鑄造金屬丸及砂粒度的測試方法 | Testing method of cast shot and grit grain size |
| JIS H0501 | 鍛造銅及銅合金平均晶粒度評估的方法 | Methods for estimating average grain size of wrought copper and copper alloys |
| JIS K0302 | 廢氣中灰塵粒度分布的測量方法 | Measuring method for particle-size distribution of dusts in flue gas |
| JIS K5600-9-3 | 涂料的試驗方法.第9部分:涂料粉末.第3節:用激光衍射進行粒度分析 | Testing methods for paints -- Part 9: Coating powders -- Section 3: Particle size analysis by laser diffraction |
| JIS K6219-4 | 橡膠工業用炭黑.顆粒炭黑的特性.第4部分:測定顆粒粒度分布 | Carbon black for rubber industry -- Characteristics of pelletized carbon black -- Part 4: Determination of pellet size distribution |
| JIS M8108 | 鉻礦石、錳礦石、鐵錳礦石.取樣及水分、粒度分布的測定 | Chromium, manganese and ferruginous manganese ores -- Sampling and determination of moisture content and size distribution |
| JIS M8706 | 鐵礦石.篩分粒度測定方法 | Iron ores -- Determination of size distribution by sieving |
| JIS R1619 | 用液體沉積攝影法對細陶瓷顆粒的粒度分布進行測試的方法 | Testing method for size distribution of fine ceramic particles by liquid photosedimentation method |
| JIS R1622 | 細陶瓷粉末原料粒度分析用試樣制備的通則 | General rules for the sample preparation of particle size analysis of fine ceramic raw powder |
| JIS R1670 | 精細陶瓷微觀結構中粒度的試驗方法 | Testing method for grain size in microstructure of fine ceramics |
| JIS R2502 | 耐火泥粒度的試驗方法 | Testing method for grain size of refractory mortar |
| JIS R2552 | 注塊耐火材料粒度的試驗方法 | Testing method for grain size of castable refractories |
| JIS R2652 | 可鑄輕質耐火材料的粒度測試方法 | Testing method for grain size of light weight castable refractories |
| JIS R6001 | 粘接磨料的粒度 | Bonded abrasive grain sizes |
| JIS R6002 | 粘接磨料粒度的試驗方法 | Testing method for bonded abrasive grain size |
| JIS R6010 | 砂紙磨料的粒度 | Coated abrasive grain sizes |
| JIS R6011 | 砂布用研磨材料粗晶粒的粒度試驗方法 | Testing method for grain size of coated abrasive macrogrits (P12-P220) |
| JIS R6012 | 布砂紙磨料微粒的粒度試驗方法(P240-P2500) | Testing method for grain size of coated abrasive microgrits (P240-P2500) |
| JIS T5505-3 | 牙科旋轉儀器.金剛石儀器.第3部分:磨料粒度、牌號和色碼 | Dental rotary instruments -- Diamond instruments -- Part 3: Grit sizes, designation and colour code |
| JIS Z2510 | 金屬粉末.干燥篩析法測定粒度 | Metallic powders -- Determination of particle size by dry sieving |
| JIS Z8819-1 | 粒度分析結果的表示方法.第1部分:圖形表示 | Representation of results of particle size analysis -- Part 1: Graphical representation |
| JIS Z8819-2 | 粒度分析結果的表示.第2部分:平均粒度/直徑和粒度分布因素的計算 | Representation of results of particle size analysis -- Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions |
| JIS Z8822 | 通過液體中沉降粒子質量測定粒度分布 | Determination of particle size distribution by the mass of sediment-particles in liquid |
| JIS Z8823-1 | 離心液體沉淀法測定粒度分布.第1部分:一般原理和導則 | Determination of particle size distribution by centrifugal liquid sedimentation methods -- Part 1: General principles and guidelines |
| JIS Z8823-2 | 離心液體沉淀法測定粒度分布.第2部分:離心照相法 | Determination of particle size distribution by centrifugal liquid sedimentation methods -- Part 2: Photocentrifuge method |
| JIS Z8825-1 | 粒度分析.激光衍射法.第1部分:一般原理 | Particle size analysis -- Laser diffraction methods -- Part 1: General principles |
| 編號 | 中文名稱 | 英文名稱 |