微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| NF T54-918-1-1999 | 建筑物內污物和污水排放(低、高溫)用塑料管道系統.苯乙烯共聚物混合物(SAN+PVC).第1部分:管道,配件和系統規 | (Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Styrene copolymer blends (SAN + PVC) - Part 1 : specifications for pipes, fittings and the system.) |
| NF J82-956-1996 | 內河航運船只.污水排放用連接件 | (Inland navigation vessels. Connections for the discharge of waste water.) |
| NF T54-062-1-1999 | 建筑物內污物和污水排放(低、高溫)用塑料管道系統.聚丙烯(PP).第1部分:管道、配件和系統規范 | (Plastics piping systems for soils and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1 : specifications for pipes, fittings and the system.) |
| NF P16-364-3-2003 | 地下非壓力排水和污水管網更新用塑料管道系統.第3部分:緊配合管用襯層 | (Plastics piping systems for renovation of underground non-pressure drainage and sewerage network - Part 3 : lining with close-fit pipes.) |
| NF T54-300-2-2003 | 普通用水、排水、污水地上和地下壓力系統用塑料管道系統.聚乙烯(PE).第2部分:管道 | (Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 2 : pipes.) |
| NF T54-300-4-2003 | 普通用水、排水、污水地下和地上壓力系統用塑料管道系統.聚乙烯(PE).第4部分:閥門 | (Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 4 : valves.) |
| NF P15-910-2001 | 在非收集污水區域與家用污水凈化有關的服務活動.自身污水處理裝置診斷及其維修合同化指南 | (Service activities relating to domestic sewerage purification in non-collective sewerage areas - Guidelines for a diagnosis of self-contained sewerage installations and for the contractualization of t) |
| NF P16-321-1/A3-1999 | 雨水和污水管道用陶土管、配件及管連接件.第1部分:要求 | (Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 1 : requirements.) |
| NF T54-300-5-2003 | 普通用水、排水、污水地下和地上壓力系統用塑料管道系統.聚乙烯(PE).第5部分:系統的適用性 | (Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 5 : fitness for purpose of the system.) |
| NF P16-321-3-1992 | 雨水管和污水管用陶土管、配件和管道連接件.第3部分:試驗方法(EN 295-3) | (Vitrified clay pipes and fittings and pipe joints for drains and sewers. Part 3 : test methods.) |
| NF P16-321-5-1994 | 排水及污水用陶土管道,配件和管接頭.第5部分:多孔陶土管道和配件的要求(EN 295-5) | (Vitrified clay pipes and fittings and pipe joints for drains and sewers. Part 5 : requirements for perforated vitrified clay pipes and fittings.) |
| NF T54-300-1-2003 | 普通用水、排水、污水地上和地下壓力系統用塑料管道系統.聚乙烯(PE).第1部分:總則 | (Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 1 : general.) |
| NF D18-211-2002 | 生活污水排放旋塞.鎳鉻電鍍覆層的一般規范 | (Sanitary tapware - General specification for electrodeposited coatings of Ni-Cr.) |
| NF P16-364-4-2003 | 地下非壓力排水和污水網用塑料管道系統.第4部分:現場固化管用的管襯 | (Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4 : lining with cured-in-place pipes.) |
| NF P16-104-2001 | 外部建筑排水和污水系統翻新和修理用構件的一般要求 | (General requirements for components used for renovation and repair of drain and sewer systems outside buildings.) |
| NF T54-914-1-2000 | 建筑物內污物和污水排放(低、高溫)用塑料管道系統.丙烯腈-丁二烯-苯乙烯共聚物.第1部分:管道,配件和系統規 | (Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1 : requirements for pipes, fittings and th) |
| NF P16-150-6-1998 | 建筑物外部排水和污水系統.第6部分:泵設備 | (Drain and sewer systems outside buildings. Part 6 : pumping installations.) |
| NF T54-917-1-2000 | 建筑物內污物和污水排放(低、高溫)用塑料管道系統.聚乙烯(PE).第1部分:管道,配件和系統規范 | (Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 1 : specifications for pipes, fittings and the system.) |
| NF U44-041-1985 | 肥料.污水處理副產物污泥.名稱和技術條件 | (Fertilizers and soil conditioners. Sludge resulting from the treatment of sewage. Denominations and specifications.) |
| NF T54-037-1981 | 塑料.未增塑聚氯乙烯管道元件.生活污水無壓排放設備用密封圈接頭.使 用特性 | (Plastics. Un-plasticized PVC parts dor piping. Simple assemblies with sealing rings for domestic water drainage piping. End use test. Specification.) |
| NF P16-700-5-1999 | 廢水處理設備.第5部分:污水池處理 | (Wastewater treatment plants - Part 5 : lagooning processes.) |
| NF P16-700-9-2002 | 污水處理廠.第9部分:氣味控制和通風 | (Wastewater treatment plants - Part 9 : odour control and ventilation.) |
| NF T54-300-3-2003 | 普通用水、排水、污水地下和地上壓力系統用塑料管道系統.聚乙烯(PE).第3部分:管件 | (Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 3 : fittings.) |
| NF X33-006-1998 | 水質.取樣.第13部分:污水管和水處理廠淤泥的取樣指南 | (WATER QUALITY. SAMPLING. PART 13 : GUIDANCE ON SAMPLING OF SLUDGES FROM SEWAGE AND WATER TREATMENT WORKS. (EUROPEAN STANDARD EN ISO 5667-13).) |
| NF P41-102-1942 | 配水.術語.污水排放 | (WATER SUPPLY. TERMINOLOGY. SEWAGE DISPOSAL.) |
| NF U44-108-1982 | 城市污水處理后的污泥.泥漿.用于批量平均含量的取樣 | (FLUID SLUDGE FROM TREATMENT OF URBAN SEWAGE. SAMPLING FOR ESTIMATING THE AVERAGE CONTENT OF A BATCH.) |
| NF T57-214-1-1998 | 地下排水系統和壓力下污水排放的塑料管道系統.基于不飽和聚酯 樹脂(UP)的玻璃增強熱固塑料.第1部分:一般性( | (Plastics piping systems for underground drainage and sewerage under pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Part 1 : general.) |
| NF X43-103-1996 | 空氣質量.氣味測量.污水氣味測量.超閥限方法 | (AIR QUALITY. OLFACTOMETRIC MEASUREMENTS. MEASUREMENT OF THE ODOUR OF A GAZEOUS EFFLUENT. SUPRA-THRESHOLD METHODS.) |
| NF P16-364-1-2003 | 地下非壓力排水和污水管網更新用塑料管道系統.第1部分:總則 | (Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1 : general.) |
| NF P16-700-3-2001 | 污水處理廠.第3部分:預處理 | (Wastewater treatment plants - Part 3 : preliminary treatment.) |
| NF A48-820-1994 | 污水排放用球墨鑄鐵管、配件、附件及其接頭.要求和試驗方法 | (Ductile iron pipes, fittings, accessories and their joints for sewerage application. Requirements and tests methods.) |
| NF P16-700-10-2001 | 污水處理廠.第10部分:安全原則 | (Wastewater treatment plants - Part 10 : safety principles.) |
| NF P16-321-7-1996 | 排水及污水用陶土管道.配件和管接頭.第7部分:陶土管道和管道插孔用連接件的要求 | (Vitrified clays pipes and fittings and pipe joints for drains and sewers. Part 7 : requirements for vitrified clay pipes and joints for pipe jacking.) |
| NF P16-100-1997 | 自流系統泄放、排水和污水管部件的一般要求 | (General requirements for components used in discharge pipes, drains and sewers for gravity systems.) |
| NF P16-321-4-1995 | 排水管和污水管用的陶土管和配件及管接頭.第4部分:專用配件、轉換接頭和可互換附件的要求(EN 295-4) | (Vitrified clay pipes and fittings and pipe joints for drains and sewers. Part 4 : requirements for special fittings, adaptors and compatible accessories.) |
| NF T54-919-1-1999 | 建筑物內污物和污水排放(低、高溫)用塑料管道系統.氯化聚氯乙烯(PVC-C).第1部分:管道,配件和系統規范 | (Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1 : specifications for pipes, fittings and the system.) |
| NF P16-321-6-1996 | 排水及污水用陶土管道.配件和管接頭.第6部分:陶土管道的出入水孔的要求 | (Vitrified clay pipes and fittings and pipe joints for drains and sewers. Part 6 : requirements for vitrified clay manholes.) |
| NF P16-150-7-1998 | 建筑物外管道和污水系統.第6部分:維修和操作(歐洲標準EN 752-7) | (DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS. PART 7 : MAINTENANCE AND OPERATIONS. (EUROPEAN STANDARD EN 752-7).) |
| NF T90-341-1995 | 水質.通過化學藥品和污水對活性污泥中微生物硝酸化抑制作用的鑒定方法(EN ISO 9509) | (Water quality. Method for assessing the inhibition of nitrification of activated sludge micro-organisms by chemicals and waste water.) |
| NF H96-112-2-1999 | 垃圾收集用提升設備.第2部分:容量500-1300升的移動廢料容器用轉軸式提升設備的技術規范和安全要求 | (Lifting devices for refuse collection. Part 2 : technical specifications and safety requirements concerning trunnion lifting devices used for mobile waste containers with capacities from 500 l to 1 300 l.) |
| NF P81-201-1993 | 垃圾收集用提升設備.第3部分:容量80-1300升的移動廢料容器用冠形和轉軸式提升設備的技術規范和安全要求 | (Lifting devices for refuse collection. Part 3 : technical specifications and safety requirements concerning comb and trunnion lifting devices used for mobile waste containers with capacities from 80 l to 1 300 l.) |
| NF R17-112-1-1998 | 垃圾收集車及其相關提升裝置.一般要求和安全要求.第1部分:尾部負載的垃圾收集車 | (Refuse collection vehicles and their associated lifting devices. General requirements and safety requirements. Part 1 : rear-end loaded refuse collection vehicles.) |
| NF H96-112-4-1999 | 垃圾收集用提升設備.第4部分:檢驗提升設備的要求和試驗方法 | (LIFTING DEVICES FOR REFUSE COLLECTION. PART 4 : REQUIREMENTS FOR CHECKING THE LIFTING DEVICE AND TEST METHODS.) |
| NF R10-302-1991 | 道路車輛.垃圾收集車發出的空中噪聲測量 | (ROAD VEHICLES. MEASUREMENT OF AIR BORNE NOISE EMITTED BY REFUSE COLLECTION VEHICLES.) |
| NF H96-110-4-1997 | 垃圾運送箱.第4部分:有寬耳軸或圓錐形和/或梳齒提升設備用容積從750L到1700L的四輪運送箱.尺寸和設計(歐洲 | (MOBILE WASTE CONTAINERS. PART 4 : CONTAINERS WITH 4 WHEELS WITH A CAPACITY FROM 750 L TO 1700 L WITH FLAT LID(S), FOR WIDE TRUNNION OR BG-AND/OR WIDE COMB LIFTING DEVICE. DIMENSIONS AND DESIGN. (EUROPEAN STANDARD EN 840-4).) |
| NF H96-110-6-1997 | 垃圾運送箱.第6部分:安全和健康要求(歐洲標準EN 840-6) | (MOBILE WASTE CONTAINERS. PART 6 : SAFETY AND HEALTH REQUIREMENTS. (EUROPEAN STANDARD EN 840-6).) |
| 編號 | 中文名稱 | 英文名稱 |