微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| NF A03-001 | 金屬材料.拉伸試驗.第1部分:常溫試驗方法 | (Metallic materials - Tensile testing - Part 1 : method of test at ambient temperature.) |
| NF A03-002 | 金屬材料.靜態單軸向試驗機的驗正.第1部分:拉伸/壓縮試驗機 | (Metallic materials - Verification of static uniaxial testing machines - Part 1 : tension/compression testing machines.) |
| NF A03-003 | 金屬材料.用于驗證單軸向試驗機的作用力檢驗儀的校準 | (Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines.) |
| NF A03-004 | 金屬材料.單軸向試驗用伸長計的校準 | (Metallic materials - calibration of extensometers used in uniaxial testing.) |
| NF A03-011 | 金屬材料.擺錘式?jīng)_擊試驗.第1部分:試驗方法 | (Metallic materials. Charpy impact test. Part 1 : test method.) |
| NF A03-012 | 金屬材料.夏比沖擊試驗.第2部分:試驗機的檢定(沖擊擺).(歐洲標準EN 10045-2) | (Metallic materials. Charpy impact test. Part 2 : verification of the testing machine (pendulum impact).) |
| NF A03-021 | 金屬材料.硬度試驗.第1部分:洛氏表面硬度試驗.(15N、30N、45N、15T、30T和45T刻度) | (METALLIC MATERIALS. HARDNESS TEST. PART 1 : ROCKWELL TEST (SCALES A, B, C, D, E, F, G, H, K) AND ROCKWELL SUPERFICIAL TEST (SCALES 15N, 30N, 45N, 15T, 30T AND 45T). (EUROPEAN STANDARD EN 10109-1).) |
| NF A03-031 | 金屬材料.布氏硬度試驗.第1部分:試驗方法(ISO 6506-81) | (METALLIC MATERIALS. BRINELL HARDNESS TEST. PART 1 : TEST METHOD. (EUROPEAN STANDARD EN 10003-1).) |
| NF A03-091 | 金屬材料.管材(全截面).彎曲試驗 | (Metallic materials. Tube (in full section). Bend test.) |
| NF A03-093 | 金屬材料.管.拉力試驗 | (Metallic materials. Tube. Drift expanding test.) |
| NF A03-096 | 金屬材料.管材.環形拉伸試驗 | (METALLIC MATERIALS. TUBE. RING TENSILE TEST. (EUROPEAN STANDARD EN 10237).) |
| NF A03-152-2 | 金屬材料.布氏硬度試驗.第2部分:試驗機的驗證和校正 | (Metallic materials. Brinell hardness test. Part 2 : verification and calibration of testing machines.) |
| NF A03-152-3 | 金屬材料.布氏硬度試驗.第3部分:標準試塊的校正 | (Metallic materials. Brinell hardness test. Part 3 : calibration of reference blocks.) |
| NF A03-153-2 | 金屬材料.洛氏硬度試驗.第2部分:試驗機(刻度 A, B, C, D, E, F, G, H, K, N, T)的驗證和校正 | (Metallic materials. Rockwell hardness test. Part 2 : verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T).) |
| NF A03-153-3 | 金屬材料.洛氏硬度試驗.第3部分:標準試塊的校正(刻度 A, B, C, D, E, F, G, H, K, N, T) | (Metallic materials. Rockwell hardness test. Part 3 : calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T).) |
| NF A03-154-1 | 金屬材料.維氏硬度試驗.第1部分:試驗方法 | (Metallic materials. Vickers hardness test. Part 1 : test method.) |
| NF A03-154-2 | 金屬材料.維氏硬度試驗.第2部分:試驗機械的校準 | (Metallic materials. Vickers hardness test. Part 2 : verification of testing machines.) |
| NF A03-154-3 | 金屬材料.維氏硬度試驗.第3部分:標準塊的校準 | (Metallic materials. Vickers hardness test. Part 3 : calibration of reference blocks.) |
| NF A03-155-1 | 金屬材料.硬度和材料參數的儀器壓痕試驗.第1部分:試驗方法 | (Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1 : test method.) |
| NF A03-155-2 | 金屬材料.硬度和材料參數的儀器壓痕試驗.第2部分:試驗機的檢定和校準 | (Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2 : verification and calibration of testing machines.) |
| NF A03-155-3 | 金屬材料.硬度和材料參數的儀器壓痕試驗.第3部分:硬度標準塊的校準 | (Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3 : calibration of reference blocks.) |
| NF A03-159 | 金屬材料.厚度3mm或小于3mm的板材或帶材.反向彎曲試驗 | (Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test.) |
| NF A03-356 | 金屬材料 | (Metallic materials.) |
| NF A03-652 | 金屬材料.薄板材和帶材.埃里克森壓凹試驗 | (Metallic materials - Sheet and strip - Erichsen cupping test.) |
| NF A03-750 | 金屬材料.張力的單軸蠕變試驗.試驗方法 | (Metallic materials - Uniaxial creep testing in tension - Method of test.) |
| NF A03-760-1 | 金屬材料.拉伸應力松弛試驗.第1部分:試驗機規程 | (Metallic materials - Tensile stress relaxation testing - Part 1 : procedure for testing machines.) |
| NF A05-411 | 金屬材料抗腐蝕性防護.大氣環境中腐蝕的可能性.大氣環境中腐蝕性的分類、確定和評價 | (Protection of metallic materials against corrosion - Corrosion likelihood in atmospheric environment - Classification, determination and estimation of corrosivity of atmospheric environments.) |
| NF A05-412-1 | 金屬材料的防腐.土壤腐蝕的可能性.第1部分:總則 | (Protection of metallic materials against corrosion - Corrosion likelihood in soil - Part 1 : general.) |
| NF A05-412-2 | 金屬材料的防腐.土壤腐蝕的可能性.第2部分:低合金和非合金黑色金屬材料 | (Protection of metallic materials against corrosion - Corrosion likelihood in soil - Part 2 : low alloyed and non alloyed ferrous materials.) |
| NF A06-352 | 黑色金屬材料的化學分析.鋼和鐵中砷的測定.分光光度法(歐洲標準EN ISO 10212) | (Chemical analysis of ferrous materials. Determination of arsenic in steel and iron. Spectrophotometric method.) |
| NF A06-392-1 | 黑色金屬材料的化學分析.鋼和鐵中氧的測定.第1部分:取樣和制備鋼樣品用于測定氧 | (Chemical analysis of ferrous materials - Determination of oxygen in steel and iron - Part 1 : sampling and preparation of steel samples for oxygen determination.) |
| NF A08-328 | 黑色金屬材料的化學分析.鋼鐵中鉻的測定.火焰原子吸收光譜測定法 | (Chemical analysis of ferrous materials. Determination of chromium in steels and irons. Flame atomic absorption spectrometric method.) |
| NF A09-201 | 無損檢驗.用X和γ射線進行金屬材料射線檢查的一般原則 | (Non-destructive testing. General principles for radiographic examination of metallic materials by X- and gamma rays.) |
| NF A09-250-3 | 無損檢驗.射線檢驗.第3部分:用X-射線和γ射線進行金屬材料射線檢驗的一般原理 | (Non-destructive testing - Radioscopic testing - Part 3 : general principles of radioscopic testing of metallic materials by X- and gamma rays.) |
| NF A49-865 | 金屬材料.重量損失磨損試驗(歐洲標準EN 10274) | (METALLIC MATERIALS. DROP WEIGHT TEAR TEST. (EUROPEAN STANDARD EN 10274).) |
| NF A49-866 | 金屬材料.管圈液壓試驗 | (METALLIC MATERIALS. TUBE RING HYDRAULIC PRESSURE TEST. (EUROPEAN STANDARD EN 10275).) |
| NF A50-110-8 | 鋁和鋁合金.廢料.第8部分:鋁分離工藝中切碎工藝產生的有色金屬材料組成的廢料 | (Aluminium and aluminium alloys - Scrap - Part 8 : scrap consisting of non-ferrous materials from shredding processes destined to aluminium separation processes.) |
| NF A80-230-1 | 焊接和合金過程.金屬材料幾何缺陷的分類.第1部分:熔焊(歐洲標準6520-1) | (Welding and allied processes. Classification of geometric imperfections in metallic materials. Part 1 : fusion welding.) |
| NF A80-230-2 | 焊接和相關工藝.金屬材料中幾何缺陷的分類.第2部分:帶壓焊接 | (Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 2 : welding with pressure.) |
| NF A81-331 | 焊接、硬釬焊和硬焊鋁及鋁合金用填充金屬材料.符號.規范 | (Filler materials for welding, brazing and braze welding aluminium and aluminium alloys. Symbolization. Specifications.) |
| NF A88-112 | 焊接操作人員.焊接操作人員用金屬材料全機械化和自動焊接用熔焊和阻焊裝置驗收試驗 | (Welding personnel. Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials.) |
| NF A89-010-1 | 金屬材料焊接工藝與驗收規范.第1部分:熔焊一般規則(歐洲標準EN 288-1) | (Specification and approval of welding procedures for metallic materials. Part 1 : general rules for fusion welding.) |
| NF A89-010-10 | 金屬材料焊接工藝的驗收和規范.第10部分:電子束焊接工藝規范 | (SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS. PART 10 : WELDING PROCEDURE SPECIFICATION FOR ELECTRON BEAM WELDING. (EUROPEAN STANDARD EN ISO 9956-10).) |
| NF A89-010-11 | 金屬材料焊接工藝的驗收和規范.第11部分:激光束焊接工藝規范 | (SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS. PART 11 : WELDING PROCEDURE SPECIFICATION FOR LASER BEAM WELDING. (EUROPEAN STANDARD EN ISO 9956-11).) |
| NF A89-010-2 | 金屬材料焊接工藝與驗收規范.第2部分:電弧焊焊接程序規范(歐洲標準EN 288-2) | (Specification and approval of welding procedures for metallic materials. Part 2 : welding procedure specification for arc welding.) |
| NF A89-010-3 | 金屬材料焊接工藝的驗收和規范.第3部分:鋼件電弧焊焊接工藝試驗(歐洲標準EN 288-3) | (Specification and approval of welding procedures for metallic materials. Part 3 : welding procedure tests for the arc welding of steels.) |
| NF A89-010-5 | 金屬材料焊接程序的規范和認可.第5部分:使用批準的電弧焊焊條進行認可 | (Specification and approval of welding procedures for metallic materials. Part 5 : approval by using approved welding consumables for arc welding.) |
| NF A89-010-6 | 金屬材料焊接程序的規范和認可.第6部分:有關以前試驗的認可 | (SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS. PART 6 : APPROVAL RELATED TO PREVIOUS EXPERIENCE. (EUROPEAN STANDARD EN 288-6).) |
| NF A89-010-7 | 金屬材料焊接程序的規范和認可.第七部分:使用電弧焊標準接程序進行認可 | (SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS. PART 7 : APPROVAL BY A STANDARD WELDING PROCEDURE FOR ARC WELDING. (EUROPEAN STANDARD EN 288-7).) |
| NF A89-010-8 | 金屬材料焊接程序的規范和認可.第八部分:利用預生產焊接試驗進行認可 | (SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATEIRALS. PART 8 : APPROVAL BY A PRE-PRODUCTION WELDING TEST. (EUROPEAN STANDARD EN 288-8).) |
| NF A89-052-2 | 金屬材料焊接程序的規范和合格評定.焊接程序規范.第2部分:氣焊 | (Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 2 : gas welding.) |
| NF A89-057-11 | 金屬材料焊接程序規范和鑒定.焊接程序試驗.第11部分:電子和激光射線焊接 | (Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11 : electron and laser beam welding.) |
| NF A89-057-8 | 金屬材料焊接程序規范和鑒定.焊接程序試驗.第8部分:管對管-板接頭的焊接 | (Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8 : welding of tubes to tube-plate joints.) |
| NF A89-101-1 | 焊接.金屬材料焊接推薦.第1部分:電弧焊接的一般指南 | (WELDING. RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS. PART 1 : GENERAL GUIDANCE FOR ARC WELDING. (EUROPEAN STANDARD EN 1011-1).) |
| NF A89-101-1/A1 | 焊接.金屬材料焊接的推薦規范.第1部分:電弧焊接通用指南 | (Welding - Recommendations for welding of metallic materials - Part 1 : general guidance for arc welding.) |
| NF A89-101-2 | 焊接.金屬材料焊接的推薦規范.第2部分:鐵素體鋼的電弧焊 | (Welding - Recommendations for welding of metallic materials - Part 2 : arc welding of ferritic steel.) |
| NF A89-101-3 | 焊接.金屬材料焊接的推薦方法.第3部分:不銹鋼的電弧焊 | (Welding - Recommendations for welding of metallic materials - Part 3 : arc welding of stainless steels.) |
| NF A89-101-4 | 焊接.金屬材料焊接的推薦方法.第4部分:鋁和鋁合金的電弧焊 | (Welding - Recommendations for welding of metallic materials - Part 4 : arc welding of aluminium and aluminium alloys.) |
| NF A89-101-5 | 焊接.金屬材料焊接的推薦方法.第5部分:包層鋼焊接 | (Welding - Recommendations for welding of metallic materials - Part 5 : welding of clad steel.) |
| NF A89-204-2 | 金屬材料焊接的破壞試驗.硬度試驗.第2部分:焊接接縫的微硬度試驗(歐洲標準EN 1043-2) | (DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS. HARDNESS TEST. PART 2 : MICRO HARDNESS TESTING ON WELDED JOINTS. (EUROPEAN STANDARD EN 1043-2).) |
| NF A89-210 | 金屬材料焊接的破壞試驗.斷裂試驗.(歐洲標準EN 1320) | (DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS. FRACTURE TEST. (EUROPEAN STANDARD EN 1320).) |
| NF A89-211 | 金屬材料焊接的破壞試驗.焊接的低倍及顯微檢驗(歐洲標準EN 1321) | (DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS. MACROSCOPIC AND MICROSCOPIC EXAMINATION OF WELDS. (EUROPEAN STANDARD EN 1321).) |
| NF A89-250-1 | 焊接的質量要求.金屬材料的熔焊.第1部分:選擇和使用導則 | (Quality requirements for welding. Fusion welding of metallic materials. Part 1 : guidelines for selection and use.) |
| NF A89-250-2 | 焊接的質量要求.金屬材料的熔焊.第2部分:全面質量系統 | (Quality requirements for welding. Fusion welding of metallic materials. Part 2 : comprehensive quality requirements.) |
| NF A89-250-3 | 焊接的質量要求.金屬材料的熔焊.第3部分:標準質量要求 | (Quality requirements for welding. Fusion welding of metallic materials. Part 3 : standard quality requirements.) |
| NF A89-250-4 | 焊接的質量要求.金屬材料的熔焊.第4部分:基本質量要求 | (Quality requirements for welding. Fusion welding of metallic materials. Part 4 : elementary quality requirements.) |
| NF A89-500 | 焊縫的無損檢驗.金屬材料用一般規則 | (Non-destructive examination of welds. General rules for metallic materials.) |
| NF A89-500/A1 | 焊接無損檢驗.金屬材料的一般規則 | (Non-destructive examination of welds - General rules for metallic materials.) |
| NF A89-573 | 金屬材料焊縫的有損檢驗.電阻點焊的扭轉試驗 | (Destructive tests on welds in metallic materials - Torsion test of resistance spot welds.) |
| NF A89-574 | 金屬材料焊接的無損檢驗.電阻焊接.電阻縫焊的壓力試驗 | (Destructive test on welds in metallic materials - Resistance welding - Pressure test on resistance seam welds.) |
| NF A89-575 | 金屬材料焊接的無損檢驗.測量δ鐵素體用的取樣方法 | (Destructive tests on welds in metallic materials - Method for taking samples for delta ferrite measurement.) |
| NF A89-600 | 焊接.金屬材料的弧雙端螺栓焊接(歐洲標準EN ISO 14555) | (WELDING. ARC STUD WELDING OF METALLIC MATERIALS. (EUROPEAN STANDARD EN ISO 14555).) |
| NF A89-601 | 焊接.金屬材料的摩擦焊接 | (Welding - Friction welding of metallic materials.) |
| NF A91-474 | 金屬材料上的轉化涂層.單位面積涂層質量的測定.重量分析法 | (Conversion coatings on metallic materials - Determination of coating mass per unit area - Gravimetric methods.) |
| NF A95-301 | 粉末冶金.硬金屬除外的燒結金屬材料.取樣 | (POWDER METALLURGY. SINTERED METAL MATERIALS EXCLUDING HARDMETALS. SAMPLING.) |
| NF A95-311 | 粉末冶金.透氣燒結金屬材料.密度和開氣孔率的測定 | (POWDER METALLURGY. PERMEABLE SINTERED METAL MATERIALS. DETERMINATION OF DENSITY AND OPEN POROSITY.) |
| NF A95-322 | 硬金屬除外的燒結金屬材料.拉伸試驗塊 | (Sintered metal materials, excluding hardmetals - Tensile test pieces.) |
| NF A95-323/A1 | 不包括硬質合金的燒結金屬材料.橫向斷裂強度的測定.修改件1:精確說明 | (Sintered metal materials, excluding hardmetals - Determination of transverse rupture strength - Amendment 1 : precision statement.) |
| NF A95-326 | 除硬金屬外的燒結金屬材料.無缺口試件 | (Sintered metal materials, excluding hardmetals. Unnotched impact test piece.) |
| NF A95-327 | 粉末冶金.硬金屬除外的燒結金屬材料.疲勞試驗用試件 | (Powder metallurgy. Sintered metal materials excluding hardmetals. Fatigue test pieces.) |
| NF A95-329 | 粉末冶金.硬金屬除外的燒結金屬材料.維氏顯微硬度的測定 | (POWDER METALLURGY. SINTERED METAL MATERIALS EXCLUDING HARDMETALS. MEASUREMENT OF VICKERS MICROHARDNESS.) |
| NF A95-342 | 粉末冶金.包括硬金屬在內的燒結金屬材料.顯微照相檢查技術 | (POWDER METALLURGY. SINTERED MATERIALS INCLUDING HARDMETALS. MICROGRAPHIC EXAMINATION TECHNIQUES.) |
| NF A95-771-1 | 燒結金屬材料.規范.第1部分:用液體潤滑劑浸漬的軸承材料 | (Sintered metal materials. Specifications. Part 1 : materials, for bearings, impregnated with liquid lubricant.) |
| NF C20-907 | 固體非金屬材料暴露于引燃源的可燃性.試驗方法清單 | (Flammability of solid non metallic materials when exposed to flame sources - List of test methods.) |
| NF E01-201-4 | 壓力設備.金屬材料的技術交貨條件的確立 | (Pressure equipment - Part 4 : establishment of technical delivery conditions for metallic materials.) |
| NF E29-492 | 工業閥門.金屬材料的薄片閥 | (Industrial valves - Diaphragm valves made of metallic materials.) |
| NF E29-648-1 | 可運輸儲氣瓶.儲氣瓶和閥門材料與氣含量的相容性.第1部分:金屬材料 | (Transportable gas cylinders. Compatibility of cylinder and valve materials with gas contents. Part 1 : metallic materials.) |
| NF E29-648-2 | 可移動式液化氣鋼瓶.內有氣體的鋼瓶和閥材料的配合性.第2部分:非金屬材料 | (Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2 : non-metallic materials.) |
| NF L06-387 | 航天結構用焊接和釬焊組裝件.用電子束焊接金屬材料組裝件 | (Weldments and brazements for aerospace structures. Joints of metallic materials by electron beam welding. Quality of weldments.) |
| NF L06-391 | 航天結構用焊接和釬焊組裝件.用擴散焊接法安裝金屬材料組裝件.焊接組裝件的質量 | (WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTION. ASSEMBLY OF METALLIC MATERIALS CARRIED OUT BY DIFFUSION WELDING. QUALITY OF WELDED ASSEMBLIES.) |
| NF L06-394 | 飛行器工業.航空與航天結構的焊接和釬焊. 用TIG方法的金屬材料焊接組件.焊接質量 | (AIRCRAFT INDUSTRIE. WELDMENTS AND BRAZEMENTS FOR AEROSPACE STRUCTURES. ASSEMBLY OF METALLIC MATERIALS WELDED BY TIG METHOD. QUALITY OF WELDMENTS.) |
| NF L06-850 | 航空航天系列.非金屬材料.設計產品.塑料粒子.技術規范 | (Aerospace series - Non metallic materials - Projecting products - Plastic particles - Technical specification.) |
| NF L10-005-1 | 航空航天系列.金屬材料.第1部分:常規命名 | (Aerospace series - Metallic materials - Part 1 : conventional designation.) |
| NF L10-006 | 航空航天系列.金屬材料.生產進度表、檢驗進度表、檢驗和試驗報告.定義、一般原理、制備和驗收 | (Aerospace series - Metallic materials - Manufacturing schedule, inspection schedule, inspection and test report - Definition, general principles, preparation and approval.) |
| NF L10-015 | 航空航天系列.金屬材料.金屬半成品產品尺寸標準的起草和說明規則 | (Aerospace series - Metallic materials - Rules for the drafting and presentation of dimensional standards for metallic semi-finished products.) |
| NF L10-020 | 航空和航天系列.金屬材料.一般結構和標準化.EN標準和其使用型之間的鏈接 | (Aerospace series. Metallic materials. General organization of standardization. Links between types of EN standards and their use.) |
| NF L10-100 | 航空和航天系列.非金屬材料分類用耐火性試驗方法 | (Aerospace series. Test methods for the flame resistance rating of non-metallic materials.) |
| NF L17-005 | 航空航天系列.非金屬材料.優選試驗溫度 | (Aerospace series. Non-metallic materials. Preferred test temperatures.) |
| NF L17-015 | 航空系列.非金屬材料.質量計劃的驗收和評價及建立的規則 | (Aerospace series - Non-metallic materials - Rules for the establishement, the evolutions and the acceptance of quality plans.) |
| NF L17-020 | 航空航天系列.非金屬材料.液相色譜法特性(高性能液相色譜法.靜擠壓色層分離法).分類法 | (AEROSPACE SERIES. NON-METALLIC MATERIALS. LIQUID CHROMATOGRAPHY CHARACTERIZATION (HIGH PERFORMANCE LIQUID CHROMATOGRAPHY. STERIC EXCLUSION CHROMATOGRAPHY). GENERAL METHODOLOGY.) |
| NF L17-021 | 航空航天系列.非金屬材料.樹脂,粘接劑,增強塑料,預浸漬.用液相色譜測定特性 | (AEROSPACE SERIES. NON-METALLIC MATERIALS. RESINS, ADHESIVES, REINFORCED PLASTICS, PREIMPREGNATES. CHARACTERISATION BY LIQUID CHROMATOGRAPHY.) |
| NF L17-022 | 航空航天系列.非金屬材料.油類、液壓油和燃料.液體層析法特征 | (AEROSPACE SERIES. NON-METALLIC MATERIALS. OILS, HYDRAULIC FLUIDS, FUELS. CHARACTERISATION BY LIQUID CHROMATOGRAPHY.) |
| NF L17-301 | 航空航天系列.非金屬材料.結構膠粘劑.試驗方法.低漆厚度的測定 | (AEROSPACE SERIES. NON-METALLIC MATERIALS. STRUCTURAL ADHESIVES. TEST METHODS. DETERMINATION OF THE PRIMER THICKNESS. (EUROPEAN STANDARD EN 2781).) |
| NF L17-310-6 | 航空航天系列.非金屬材料.泡沫結構粘合劑.試驗方法.第6部分:吸水性的測定 | (Aerospace series - Non-metallic materials - Foaming structural adhesives - Test methods - Part 6 : determination of water absorption.) |
| NF L19-003 | 航空航天系列.元件和非金屬材料中的管腔蜂窩狀材料 | (AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS IN COMPONENT AND NON-METALLIC MATEIRALS. GENERALITIES.) |
| NF L22-031 | 緊固件.金屬材料的選擇 | (Fasteners - Selection of metallic materials.) |
| NF S91-243 | 牙科用金屬材料.抗腐蝕試驗方法 | (Dental metallic materials - Corrosion test methods.) |
| NF S94-051 | 外科植入物.金屬材料.鍛造不銹鋼 | (Implants for surgery - Metallic materials - Wrought stainless steel.) |
| NF S94-052 | 外科用植入物.金屬材料.第2部分:非金屬鈦 | (Implants for surgery. Metallic materials. Part 2 : unalloyed titanium.) |
| NF S94-053 | 外科植入物.金屬材料.第12部分:鍛造鈷/鉻/鉬合金 | (Implants for surgery. Metallic materials. Part 12 : wrought cobalt-chromium-molybdenum alloy.) |
| NF S94-054 | 外科植入物.金屬材料.第4部分:鈷鉻鉬鑄造合金 | (Implants for surgery. Metallic materials. Part 4 : cobalt-chromium-molybdenum casting alloy.) |
| NF S94-055 | 外科用植入物.金屬材料.第5部分:鍛制鈷-鉻-鎢-鎳合金 | (Implants for surgery. Metallic materials. Part 5 : wrought cobalt-chromium-tungsten-nickel alloy.) |
| NF S94-056 | 外科植入物.金屬材料.第6部分:鍛壓的鈷鎳鉻鉬合金 | (Implants for surgery. Metallic materials. Part 6 : wrought cobalt-nickel-chromium-molybdenum alloy.) |
| NF S94-057 | 外科植入物.金屬材料.可鍛和冷成型鈷鉻鎳鉬鐵合金 | (Implants for surgery. Metallic materials. Forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy.) |
| NF S94-058 | 外科植入物.金屬材料.第8部分:鍛壓的鈷鎳鉻鉬鎢鐵合金 | (Implants for surgery. Metallic materials. Part 8 : wrought cobalt-nickel-chromium-molybdenum-tungsten-iron alloy.) |
| NF S94-059 | 外科植入物.金屬材料.可鍛高氮不銹鋼 | (Implants for surgery. Metallic materials. Wrought high nitrogen stainless steel.) |
| NF S94-065 | 外科植入物金屬材料.基于磷酸鈣包被的砷,汞,鉻,鉛含量的測定 | (Materials for surgical implants. Determination of arsenic, mercury, cadmium and lead on coatings based on phosphate of calcium.) |
| NF S94-066 | 外科植入物金屬材料.磷酸鈣鈣/磷比數量的測定 | (Materials for surgical implants. Quantitative determination of the Ca/P ratio of calcium phosphates.) |
| NF S94-471 | 外科設備.金屬材料.第1部分:不銹鋼 | (Surgical instruments - Metallic materials - Part 1 : stainless steel.) |
| 編號 | 中文名稱 | 英文名稱 |