微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| NF A50-110-12 | 鋁和鋁合金.廢料.第12部分:一種合金組成的車床切屑 | (Aluminium and aluminium alloys - Scrap - Part 12 : turnings consisting of one single alloy.) |
| NF A82-041 | 電阻焊接.汽車工業中多點焊接用的帶分離式二次線組的變壓器.特殊規范 | (Resistance welding. Transformers with two separate secondary windings for multispot welding as used in automobile industry. Particular specifications.) |
| NF A82-113 | 電阻焊設備.汽車工業中多點點焊用帶兩個單獨副線圈的變壓器的特殊規范 | (RESISTANCE WELDING EQUIPMENT. PARTICULAR SPECIFICATIONS APPLICABLE TO TRANSFORMERS WITH TWO SEPARATE SECONDARY WINDINGS FOR MULTI-SPOT WELDING, AS USED IN THE AUTOMOBILE INDUSTRY. (EUROPEAN STANDARD EN ISO 7284).) |
| NF C20-003-5 | 環境條件分類.第3部分:環境參數及其嚴酷度組的分類.第5節:地面車輛裝置 | (Classification of environmental conditions. Part 3 : classification of groups of environmental parameters and their severities. Section 5 : ground vehicle installations.) |
| NF C46-904-6 | 使用配電線運載系統的配電車.第6部分:A-XDR編碼規則 | (Distribution automation using distribution line carrier systems - Partie 6 : A-XDR encoding rule.) |
| NF C47-740 | 家用和類似用途的自動電控制設備.第2部分:汽車啟動繼電器的特殊要求 | (Automatic electrical controls for household and similar use. Part 2 : particular requirements for motor starting relays.) |
| NF C58-982-2 | 電動道路車輛驅動用二次電池.第2部分:動態放電性能試驗和動態耐久試驗 | (Secondary batteries for the propulsion of electric road vehicles - Part 2 : dynamic discharge performance test and dynamic endurance test.) |
| NF C58-982-3 | 電動道路車輛推進用蓄電池.第3部分:性能和壽命試驗(城市車輛的交通相容性) | (Secondary batteries for the propulsion of electric road vehicles - Part 3 : performance and life testing (traffic compatible, urban use vehicles).) |
| NF C63-975-2-1 | 電動車輛充電系統.第 21部分: 對交/直流電源導電連接的電動車輛的要求 | (Electric vehicle conductive charging system - Part 21 : electric vehicle requirements for conductive connection to an a.c./d.c supply.) |
| NF C63-975-2-2 | 電動車輛充電系統.第 22部分: 交流電動車輛充電站 | (Electric vehicle conductive charging system - Part 22 : AC electric vehicle charging station.) |
| NF C72-101-3 | 白熾燈.安全規范.第3部分:鹵鎢燈(非車用) | (Incandescent lamps - Safety specifications - Part 3 : tungsten-halogen lamps (non-vehicle).) |
| NF C72-105 | 鹵鎢燈(非車輛用).性能規范 | (Tungsten halogen lamps (non-vehicle) - Performance specifications.) |
| NF C73-895 | 家用和類似用途電器的安全.第2-95部分:住宅用垂直移動汽車門驅動裝置的特殊要求 | (Safety of household and similar electrical appliances - Part 2-95 : particular requirements for drives for vertically moving garage doors for residential use.) |
| NF C91-012 | 車輛,船舶,內燃機驅動裝置.無線電干擾特性.不包括那些安裝在車輛/小船/自身有驅動的裝置中的或類似車輛/小 | () |
| NF C91-025 | 車載、船載和設備上的接收機保護用無線電干擾特性.極限值和測量方法 | (Radio disturbance characteristics for the protection of receivers used on board vehicles, boats and on devices - Limits and methods of measurement.) |
| NF D35-357 | 專用液化石油氣設施規范.車輛和小艇中安裝的房間用密封式液化石油氣空間加熱設備 | (Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats.) |
| NF D35-358 | 旅游居住車和其他道路車輛的液化石油天然氣裝置用規范 | (Specification for the installation of LPG-systems for habitation purposes in leisure accommodation vehicles and other road vehicles.) |
| NF E03-501 | ISO微型車螺紋.牙形件 | (ISO miniature screw threads.profile.) |
| NF E03-502 | ISO微型車螺紋.總圖 | (ISO miniature screw threads.general plan.) |
| NF E03-503 | ISO微型車螺紋.公差.總圖 | (ISO miniature screw threads.tolerances.general plan.) |
| NF E03-504 | ISO微型車螺紋.公差.極限尺寸表 | (ISO miniature screw threads.tolerances.tables for limits of sizes.) |
| NF E26-115 | 摩托車圓鏈.特性和試驗方法 | (MOTOR CYCLE CHAINS. CHARACTERISTICS AND TEST METHODS.) |
| NF E29-733 | 氣瓶.用作機動車燃料的天然氣的車上存儲用高壓氣瓶 | (Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles.) |
| NF E29-735 | 移動式氣瓶.蓄電池動力車.設計、生產、標識和檢驗 | (Transportable gas cylinders - Battery-vehicles - Design, manufacture, identification and testing.) |
| NF E29-780 | 可運輸儲氣瓶.永久氣體和液化氣(乙炔除外)用蓄電池驅動車輛.灌裝時的檢驗 | (Transportable gas cylinders - Battery vehicles for permanent and liquefied gases (excluding acetylene) - Inspection at time of filling.) |
| NF E52-043 | 起重和裝卸.手動鏈?zhǔn)交?術語和一般特性 | (Lifting and handling. Hand-operated chain hoists. Terminology and general characteristics.) |
| NF E52-057 | 起重和裝卸.手搖滾筒式絞車.術語和一般特征 | (Lifting and handling. Hand-operated drum winches.) |
| NF E52-060 | 起重和裝卸.電動滑車.術語和一般特性 | (Lifting and handling. Electrically-operated hoists.) |
| NF E52-093 | 起重和裝卸.手動鏈?zhǔn)交?一般設計規則.試驗 | (LIFTING AND HANDLING. MANUALLY OPERATED CHAIN PULLEY BLOCKS GENERAL RULES FOR CONSTRUCTION. TESTS.) |
| NF E52-094 | 起重和裝卸.手動鏈?zhǔn)交?使用規則(手拉葫蘆除外) | (LIFTING AND HANDLING. MANUALLY OPERATED CHAIN PULLEY BLACKS. GENERAL RULES FOR USE. (EXCLUDING BLOCKS WITH OPERATING HANDLE).) |
| NF E52-096 | 起重和裝卸.手搖滾筒式絞車.使用規則 | (LIFTING AND HANDLING. MANUALLY OPERATED DRUM HOISTS. GENERAL RULES FOR USE.) |
| NF E52-115-2 | 提升設備.分類.第2部分:汽車起重機 | (Lifting appliances - Classification - Part 2 : mobile cranes.) |
| NF E52-300 | 輕便機車上安裝的安全裝置.特征和檢驗 | (DEAD MAN`S DEVICES FOR LOCOTRACTOR. SPECIFICATIONS AND CHECKINGS.) |
| NF E56-005-1 | 地下采礦機械.地下作業用移動機械.安全.第1部分:橡膠輪胎車輛 | (Machines for underground mines - Mobile machines working underground - Safety - Part 1 : rubber tyred vehicles.) |
| NF E56-005-2 | 地下采礦機械.地下作業用移動機械.安全.第1部分:軌道機車 | (Machines for underground mines - Mobile machines working underground - Safety - Part 2 : rail locomotives.) |
| NF E58-007 | 土方機械.翻斗車.術語和工業規范 | (Earth-moving machinery. Dumpers. Terminology and commercial specifications.) |
| NF E58-053 | 土方機械.翻車保護結構.實驗室試驗和性能要求 | (Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements.) |
| NF E58-110 | 道路建筑車輛.瀝青混合成套設備.安全要求.(EN 536) | (ROAD CONSTRUCTION MACHINES. ASPHALT MIXING PLANTS. SAFETY REQUIREMENTS. (EUROPEAN STANDARD EN 536).) |
| NF E58-120 | 土方機械.安全.第6部分:自動傾卸車的要求 | (EARTH-MOVING MACHINERY. SAFETY. PART 6 : REQUIREMENTS FOR DUMPERS. (EUROPEAN STANDARD EN 474-6).) |
| NF E58-155 | 土方機械.翻斗車身支架和操作艙翻轉支架裝置 | (EARTH-MOVING MACHINERY. DUMPER BODY SUPPORT AND OPERATOR`S CAB TILT SUPPORT DEVICES.) |
| NF E60-022 | 車床絲杠的螺矩(數控車床除外) | (PITCHES OF SCREW LEAD OF LATHES (OTHER THAT NUMERICAL CONTROLLED LATHES).) |
| NF E60-101 | 通用平行車床的合格條件.精度測試 | (Acceptance conditions for general purpose parallel lathes. Testing of the accuracy.) |
| NF E60-102 | 數控臥式車床的試驗條件.精確度檢驗 | (TEST CONDITIONS FOR NUMERICAL CONTROL PARALLEL LATHES. TESTING OF THE ACCURACY.) |
| NF E60-103 | 機床.臥式軸六角自動車床和臥式單軸自動車床的試驗條件.精度試驗 | (Machine tools. Test conditions for horizontal spindle turret and single spindle automatic lathes. Testing of the accuracy.) |
| NF E60-105 | 單柱或雙柱立式車床.驗收條件和名稱.第1部分:概述 | (Acceptance conditions for vertical turning and boring lathes with one or two columns. Part 1 : general introduction.) |
| NF E60-106 | 單柱或雙柱立式車床.驗收條件和名稱.第2部分：固定或可移動卡盤車床.精確度檢驗 | (Acceptance conditions and nomenclature for vertical turning and boring lathes with one or two columns. Part 2 : lathes with a single fixed or movable table. Testing of accuracy.) |
| NF E60-107 | 機床.仿形車床和仿形輔助裝置.驗收條件.精確度檢驗 | (Machine-tools. Copying lathes and copying attachments. Acceptance conditions. Testing of accuracy.) |
| NF E60-150 | 機車.車間計量學原理 | (MACHINE TOOLS. PRINCIPLES OF WORKSHOP METROLOGY.) |
| NF E60-273 | 機床.測量噪音的常規工作條件.車床 | (Machine tools. Conventional working conditions for measurement of noise. Turning machines.) |
| NF E60-415 | 機床.車床和頂心.保護裝置強度的試驗 | (MACHINES TOOLS. LATHES AND TURNING CENTRES. STRENGTH TESTS FOR GUARDS.) |
| NF E60-416/A1 | 機床的安全.小型數字控制的轉向車床和轉向中心 | (Safety of machine tools - Small numerically controlled turning machines and turning centres.) |
| NF E60-417 | 機床的安全.大型數字控制的轉向車床和轉向中心 | (Safety of machine tools - Large numerically controlled turning machines and turning centres.) |
| NF E60-418 | 機床的安全.帶和不帶自動控制的手控車床 | (Safety of machine-tools - Manually controlled turning machines with or without automatic control.) |
| NF E60-425 | 機床.安全性.多軸自動車床 | (Machine tools - Safety - Multi-spindle automatic turning machines.) |
| NF E62-105 | 機床.車床頂尖.互換尺寸 | (Machine tools. Lathe centres. Sizes for interchangeability.) |
| NF E62-110 | 車床切削工具.軸頭和面板.可互換性尺寸.第2部分:凸輪鎖型 | (Machine-tools. Spindle noses and face plates . Sizes for interchangeability. Part 2 : camlock type.) |
| NF E62-111 | 車床主軸頭部和卡盤.卡口型 | (LATHE SPINDLE NOSES AND BACK PLATES. TYPE BAYONET.) |
| NF E64-061 | 木材加工機械.普通車床.驗收條件和術語.精確度檢驗 | (Woodworking machines. Acceptance conditions and nomenclature for turning lathes. Precision testing.) |
| NF E66-303 | 車刀和刨刀柄.選擇形狀和尺寸 | (Shanks for turning and planning tools - Shapes and dimensions of the section.) |
| NF E66-305 | 車刀的金屬碳化物刀片 | (CARBIDE TIPS FOR TURNING TOOLS.) |
| NF E66-311 | 可轉位刀片的車刀和仿形刀刀柄和刀片座.名稱與牌號 | (Turning and copying tool holders and cartridges for indexable inserts. Designation.) |
| NF E66-322 | 車床工具.帶硬金屬釬焊刀片的自動車刀 | (Turning tools. Tools with hardmetal inserts for turning on automatic machines.) |
| NF E66-344 | 帶可轉位刀片的車刀和仿形刀用單刃刀具夾頭.尺寸 | (Single-point tool holders for turning and copying, for indexable inserts. Dimensions.) |
| NF E66-363 | 高速鋼合金車床刀具.偏刀 | (TURNING TOOLS WITH SPEED STEEL INSERTS. OFFSET SIDE TURNING TOOLS.) |
| NF E66-364 | 高速鋼合金車床刀具.倒角車刀 | (TURNING TOOLS WITH SPEED STEEL INSERTS. OFFSET TURNING TOOLS FOR CORNER WORK.) |
| NF E66-365 | 高速鋼合金車床刀具.外圓車刀 | (STRAIGTH TURNING TOOLS WITH HIGH SPEED TIPS.) |
| NF E66-366 | 高速鋼合金車床刀具.寬臉方頭車刀 | (TURNING TOOLS WITH SPEED STEEL INSERTS. WIDE FACE SQUARE NOSE TURNING TOOLS.) |
| NF E66-367 | 高速鋼合金車床刀具.切槽刀 | (TURNING TOOLS WITH SPEED STEEL INSERTS. PARTING OFF TURNING TOOLS.) |
| NF E66-368 | 高速鋼合金車床刀具.切斷車刀 | (TURNING TOOLS WITH SPEED STEEL INSERTS. CUTTING OFF TOOLS.) |
| NF E66-369 | 高速鋼合金車床刀具.車外螺紋刀具 | (TURNING TOOLS WITH SPEED STEEL INSERTS. EXTERNAL THREADING TOOLS.) |
| NF E66-370 | 高速鋼合金車床刀具.鏜刀 | (TURNING TOOLS WITH SPEED STEEL INSERTS. BORING TOOLS.) |
| NF E66-371 | 高速鋼合金車床刀具.鏜孔端面刀具 | (TURNING TOOLS WITH SPEED STEEL INSERTS. INTERNAL SIDE TURNING TOOLS.) |
| NF E66-372 | 高速鋼合金車床刀具.擴孔鏜刀 | (TURNING TOOLS WITH SPEED STEEL INSERTS. RIGHT ANGLE PARTING OFF TURNING TOOLS.) |
| NF E66-373 | 高速鋼合金車床刀具.車內螺紋刀具 | (TURNING TOOLS WITH SPEED STEEL INSERTS. INTERNAL THREADING TOOLS.) |
| NF E66-510 | 車床刀尖的圓弧半徑 | (Corner radius of single point cutting tools.) |
| NF E66-551 | 車床用刀架 | (LATHE TOOL POSTS.) |
| NF E86-012 | 含空氣或氮?dú)獾牟挥没鸺訜岬暮唵螇毫θ萜?第2部分:用于汽車及其掛車制動和輔助系統的壓力容器 | (Simple unfired pressure vessels designed to contain air or nitrogen. Part 2 : pressure vessels for air braking and auxiliary systems for motor-vehicles and their trailers.) |
| NF E86-500-2 | 冷凍車輛.最大容量不超過1000升的便攜隔絕車輛.第2部分:設計,生產,檢驗和試驗 | (Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2 : design, fabrication, inspection and testing.) |
| NF E86-502-1 | 低溫車輛.大型可運輸真空絕緣車輛.第1部分:基本要求 | (Cryogenic vessels - Large transportable vacuum insulated vessels - Part 1 : fundamental requirements.) |
| NF E86-502-3 | 冷凍車輛.大型可運輸真空絕緣車輛.第3部分:運行要求 | (Cryogenic vessels - Large transportable vacuum insulated vessels - Part 3 : operational requirements.) |
| NF E86-511 | 低溫車輛.低溫柔性軟管 | (Cryogenic vessels - Cryogenic flexible hoses.) |
| NF E86-514 | 冷凍車輛.冷凍服務用泵 | (Cryogenic vessels - Pumps for cryogenic service.) |
| NF E90-411 | 機械振動.工業貨車.駕駛員座椅振動的實驗室評價和規范 | (Mechanical vibration - Industrial trucks - Laboratory evaluation and specification of operator seat vibration.) |
| NF E90-451-1 | 機械振動.車輛座位振動評價的實驗室方法.第1部分:基本要求 | (Mechanical vibration. Laboratory method for evaluating vehicle seat vibration. Part 1 : basic requirements.) |
| NF F00-072 | 鐵路車輛.密實橡膠制擠壓件 | (GENERAL RAILWAY EQUIPMENT. COMPACT-RUBBER EXTRUDED PARTS.) |
| NF F00-103 | 鐵路車輛.概論.有關鐵路經濟的量、單位和符號.定義和起草規則 | (ROLLING STOCK. GENERALITIES. QUANTITIES,UNITS AND SYMBOLS RELATING TO THE RAILWAY ECONOMICS. DEFINITIONS AND DRAFTING RULES.) |
| NF F00-125-1 | 鐵路設施.設備的環境條件.平板車輛上的設備 | (Railway applications - Environmental conditions for equipment - Part 1 : equipment on board rolling stock.) |
| NF F00-701 | 鐵路設備梗概.車輛每個車輪靜態負荷的測量.稱重設備和控制 | (RAILWAY EQUIPMENT IN GENERAL. MEASUREMENT OF THE STATIC LOADS PER EACH WHEEL OF THE VEHICLES. WEIGHING INSTALLATIONS AND CONTROL.) |
| NF F00-702 | 鐵路設施.機車和軌道間的動態相互作用.力測量法 | (RAILWAY APPLICATIONS. DYNAMIC INTERACTION BETWEEN VEHICLES AND TRACKS. FORCE MEASUREMENT METHOD.) |
| NF F01-002 | 鐵路車輛.絞鏈 | (RAILWAY TRANSPORT EQUIPMENT. HINGE PLATES.) |
| NF F01-003 | 鐵路車輛.涂漆或類似銘牌用的字體 | (RAILWAY TRANSPORT EQUIPMENT. LETTERS FOR PAINTED OR SIMILAR INSCRIPTIONS.) |
| NF F01-014 | 鐵路車輛.Ａ型和Ｃ型車軸 | (RAILWAY TRANSPORT EQUIPMENT. TYPE A AND C MACHINING CENTRES FOR AXLES.) |
| NF F01-015/AM1 | 火車運輸設備.帶有開槽螺紋末端的非鉆孔軸.開槽螺紋末端 | (RAILWAY TRANSPORT EQUIPMENT. UNBORED AXLES WITH GROOVED SCREW-ENDS. GROOVED SCREW-ENDS.) |
| NF F01-018 | 鐵路運輸設備.帶螺紋端頭和有槽端頭的未鉆孔軸.車輪抱閘裝置 | (RAILWAY TRANSPORT EQUIPMENT. UNBORED AXLES WITH THREADED AND SLOTTED ENDS. WHEEL LOCKING DEVICES.) |
| NF F01-026 | 鐵路車輛.車軸.輪,輪箍和輪副的標記.標記定義 | (Rolling stock. Marking of the axles, wheels, tyres and wheels sets. Definition of the marks.) |
| NF F01-027 | 鐵路運輸設備.車軸標記.用mm表示尺寸 | (Railway transport equipment. Marking of the axles. Dimensions in millimetres.) |
| NF F01-028 | 鐵路車輛.車輪標記 | (Rolling stock. Marking of wheels and tyres.) |
| NF F01-030 | 鐵路車輛.中型絞鏈 | (RAILWAY TRANSPORT EQUIPMENT. MEDIUM SIZED HINGES.) |
| NF F01-031 | 鐵路車輛.大型鉸鏈 | (RAILWAY TRANSPORT EQUIPMENT. HEAVY-DUTY HINGES.) |
| NF F01-032 | 鐵路車輛.中型和大型鉸鏈. 軸 | (RAILWAY TRANSPORT EQUIPMENT. MEDIUM AND HEAVY-DUTY HINGES. PINS.) |
| NF F01-033 | 鐵路車輛.槽鋼彈簧片定中心用的定位銷 | (RAILWAY TRANSPORT EQUIPMENT. STEADY PINS FOR CENTERING LAMINATED SPRINGS IN GROOVED PLATES.) |
| NF F01-034 | 鐵路車輛.屬于一個鐵路管理機構的集裝箱和各種車輛（機車除外）的識別牌 | (RAILWAY TRANSPORT EQUIPMENT. IDENTIFICATION PLATE FOR CONTAINERS AND ALL VEHICLES (OTHER THAN LOCOMOTIVES) BELONGING TO A RAILWAY ADMINISTRATION.) |
| NF F01-035 | 鐵路車輛.特種車輛的許可證和識別牌 | (RAILWAY TRANSPORT EQUIPMENT. AUTHORIZATION AND IDENTIFICATION PLATE FORPRIVATELY-OWNED VEHICLES.) |
| NF F01-039 | 鐵路車輛.聯接鈕 | (RAILWAY TRANSPORT EQUIPMENT. HOOKING PINS.) |
| NF F01-041 | 鐵路車輛.手柄. 外形尺寸. 安裝 | (RAILWAY TRANSPORT EQUIPMENT. HANDLES - GAUGES - FIXINGS.) |
| NF F01-042 | 鐵路車輛.鐵路車輛和類似車輛運行中的定位標 | (Railway trnasport equipment. Positioning of railway carriages and similar vehicles.) |
| NF F01-044 | 鐵路器材.列車定位 | (ROLLING STOCK. ORIENTATION OF THE LIFT OF CARRIAGES.) |
| NF F01-046 | 鐵路車輛.冷彎或熱彎鋼板彈簧.組彈簧片.公差 | (RAILWAY TRANSPORT EQUIPMENT. HOT OR COLD FLANGED COACH SPRINGS. MOUNTED SPRINGS. TOLERANCES.) |
| NF F01-047 | 鐵路車輛.熱彎或冷彎鋼板彈簧.板簧片 | (RAILWAY TRANSPORT EQUIPMENT. HOT OR COLD FLANGED COACH SPRINGS. SPRING LEAVES.) |
| NF F01-048 | 鐵路車輛.熱彎或冷彎鋼板彈簧, 彈簧箍. 公差. 工作尺寸 | (RAILWAY TRANSPORT EQUIPMENT. HOT OR COLD FLANGED COACH SPRINGS. FLANGES. TOLERANCES. FUNCTIONAL DIMENSIONS.) |
| NF F01-049 | 鐵路車輛.熱彎或冷彎鋼板彈簧. ＵＩＣ型鍵. 銷. 邊 | (RAILWAY TRANSPORT EQUIPMENT. HOT OR COLD FLANGED COACH SPRINGS : U.I.C. TYPE WEDGES. KEYS. CHOCKS.) |
| NF F01-054 | 鐵路車輛.ＢＥＲＮＥ板手控制的活動方塊裝裝置. 極限尺寸 | (RAILWAY TRANSPORT EQUIPMENT. BERNE KEY OPERATED SOCKETS. DIMENSION LIMITS.) |
| NF F01-055 | 鐵路車輛.緊線器. 信號燈和牽引桿 | (ROLLING STOCK. TURNBUCKLES AND DRAW BARS FOR TIGHTENERS.) |
| NF F01-079 | 鐵路車輛.輪箍用四腳扣環 | (RAILWAY TRANSPORT EQUIPMENT. RECTANGULAR TYRE CLIP.) |
| NF F01-080 | 鐵路車輛.絞孔輪箍. 公差（用四角環扣安裝） | (RAILWAY TRANSPORT EQUIPMENT. BORED TYRES. TOLERANCES. (FITTED WITH RECTANGULAR TYRE CLIP).) |
| NF F01-082 | 鐵路車輛.管路. 軟管接頭（非金屬） | (RAILWAY TRANSPORT EQUIPMENT. PIPEWORK. FIXING OF NON-METALLIC FLEXIBLE PIPES.) |
| NF F01-082M | 鐵路車輛.管路.軟管接頭(非金屬) | () |
| NF F01-084 | 鐵路車輛.管路. 雙錐形連接環 | (Railway transport equipment. Pipework. Biconical rings.) |
| NF F01-101 | 鐵路車輛.鐵路車輛.按法國NF 01-501標準的設計樣板制作的鐵路車輛舉升裝置 | (RAILWAY ROLLING STOCK. LIFTING OF RAILWAY VEHICLES FITTING THE CONSTRUCTION GAUGE SPECIFED IN FRENCH STANDARD NF F 01-501.) |
| NF F01-104 | 鐵路車輛.箱用軸承. 驗收檢驗 | (Railway transport equipment. Rolling bearings for railway axle-boxes. Acceptance inspection.) |
| NF F01-115 | 鐵路車輛.標準軌道車輛的輪對. 特點 | (Railway rolling stock. Wheel profils for standard gauge rolling stock. Characteristics.) |
| NF F01-116 | 鐵路車輛.車輪組件和轉向架.非動力軸.設計方法 | (Railway applications - Wheelsets and bogies - Non-powered axles - Design method.) |
| NF F01-117 | 鐵路車輛.車輪組件和轉向架.動力軸.設計方法 | (Railway applications - Wheelsets and bogies - Powered axles - Design method.) |
| NF F01-120 | 鐵路車輛.車軸. 術語. 定義. 制圖規則 | (Railway transport equipment. Plain axles. Terminology. Definitions. Rules for the preparation of technical drawings.) |
| NF F01-121 | 軸承箱用車軸. 公差. 表面狀態 | (ROLLING STOCK. AXLES FOR ROLLER-BEARING AXLE-BOXES. TOLERANCES. SURFACE CONDITIONS. SPECIAL DIMENSIONAL INDICATIONS.) |
| NF F01-123 | 鐵路車輛.車軸.實心軸.質量規定 | (Railway rolling stock. Full axles. Quality requirements.) |
| NF F01-124 | 鐵路車輛.空心車軸.質量要求.公差.表面的狀況.特殊尺寸表示 | (Railway rolling stock drilled axles. Quality requirements. Tolerances. Surface conditions. Special dimensional indications.) |
| NF F01-125 | 鐵路車輛.輪對. 術語. 定義. 制圖規則 | (ROLLING STOCK. WHEELSETS. TERMINOLOGY. DEFINITIONS. RULES APPLICABLE TO DRAWING ARRANGEMENTS.) |
| NF F01-130 | 鐵路車輛.車輪. 術語. 定義. 制圖規則 | (Rolling stock. Wheels. Terminology. Definitions. Rules applicable to drawing arrangements.) |
| NF F01-131 | 鐵路車輛. 車輪. 公差. 表面狀態. 特殊定尺寸元件 | (ROLLING STOCK. WHEELS. TOLERANCES. SURFACE CONDITIONS. SPECIAL DIMENSIONAL INDICATIONS.) |
| NF F01-133 | 鐵路車輛.整體車輪.質量要求 | (Railway rolling stock. Solid wheels. Quality requirements.) |
| NF F01-134 | 鐵路車輛.極高速列車用整體輪.規范 | (RAILWAY ROLLING STOCK. SOLID WHEELS FOR VERY HIGH SPEED TRAINS. SPECIFICATIONS.) |
| NF F01-141 | 鐵路車輛. 軸承部件. 驗磁器檢驗 | (Rolling stock. Running gear. Magnetoscopic examination.) |
| NF F01-142 | 鐵路車輛.行走機構.超聲檢驗 | (Railway rolling stock. Running gear. Ultrasonic examination.) |
| NF F01-152 | 鐵路車輛.梯子和天橋及平臺用的防濕蓋板 | (ROLLING STOCK. GRATING FOR STEPS,GANGWAYS AND VESTIBULES.) |
| NF F01-200 | 鐵路車輛.鉸接.綜合 | (RAILWAY TRANSPORT EQUIPMENT. JOINTS. GENERAL REMARKS.) |
| NF F01-201 | 鐵路車輛.絞接.綜合 | (RAILWAY TRANSPORT EQUIPMENT. HIGH-QUALITY JOINTS WITH CLEVIS AND TENON WITH ROTATING PIN. CONSTITUENT PARTS.) |
| NF F01-202 | 鐵路車輛.轉動軸的精加工軸頸與外殼的聯接. 構件 | (RAILWAY TRANSPORT EQUIPMENT. ROUGH-QUALITY JOINTS WITH CLEVIS AND TENON AND ROTATING PIN. CONSTITUENT PARTS.) |
| NF F01-204 | 鐵路車輛.軸頸和外殼的粗加工聯接.構件 | (RAILWAY TRANSPORT EQUIPMENT. ROUGH-QUALITY JOINTS WITH CLEVIS AND TENON WITH FIXED PIN. CONSTITUENT PARTS.) |
| NF F01-205 | 鐵路車輛.精加工軸頸和外殼的聯接.構件 | (RAILWAY TRANSPORT EQUIPMENT. ROUGH-QUALITY LOOSE-FITTING JOINTS WITH CLEVIS AND TENON. CONSTITUENT PARTS.) |
| NF F01-206 | 鐵路車輛.耳軸聯接.構件 | (RAILWAY TRANSPORT EQUIPMENT. PIN JOINTS. CONSTITUENT PARTS.) |
| NF F01-211 | 鐵路車輛.軸頸和外殼的聯接.軸頸和外殼 | (RAILWAY TRANSPORT EQUIPMENT. CLEVIS AND TENON JOINTS. CLEVISES AND TENONS.) |
| NF F01-212 | 鐵路車輛.耳軸聯接.耳軸和桿 | (RAILWAY TRANSPORT EQUIPMENT. PIN JOINTS. PINS AND LEVERS.) |
| NF F01-215 | 鐵路設施.完成制造后而使用前的鐵道車輛的測試 | (Railway applications - Testing of rolling stock after completion of construction and before entry into service.) |
| NF F01-231 | 鐵路車輛.帶耳軸的軸頸和外殼的聯接.ＡＳ,ＡＧ型鋼制內環和外環 | (Rolling stock. Articulations with clevis and tenon and with gudgeon. Inner steel rings type as, ag.) |
| NF F01-232 | 鐵路車輛.軸頸和外殼的聯接.ＢＳ型銅制內環 | (RAILWAY TRANSPORT EQUIPMENT. CLEVIS AND TENON JOINTS. INNER BRASS RINGS TYPE BS.) |
| NF F01-233 | 鐵路車輛.耳軸聯接.ＥＡＣ,ＩＧ鋼制內鋼環 | (Rolling stock. Articulations with gudgeon. Inner and outer steel rings types AEG, lAG.) |
| NF F01-252 | 鐵路車輛.內部設備成分的確定 | (RAILWAY ROLLING STOCK. MOUNTING OF INTERIOR FITTINGS. DESIGN ARRANGEMENTS.) |
| NF F01-281 | 鐵路車輛.纖維加強熱固塑料材料 | (RAILWAY ROLLING STOCK. FIBRE REINFORCED THERMOSETING PLASTICS.) |
| NF F01-301 | 鐵路車輛.機車和掛車負載的重量和狀況 | (ROLLING STOCK. MASSES AND LOAD STATES OF POWERED VEHICLES AND COACHES.) |
| NF F01-302 | 鐵路車輛. 車輛術語. 工作和試驗車輛 | (ROLLING STOCK. SPECIFIC TERMS FOR ROLLING STOCK. WORKING AND TEST VEHICLES.) |
| NF F01-303 | 鐵路車輛. 提升作業用攝取點的定位圖形符號 | (ROLLING STOCK. GRAPHIC SYMBOLIZATION OF JACKING POINTS FOR LIFTING AND RERAILING OPERATIONS.) |
| NF F01-305 | 鐵路車輛.使用和維護的概念和可靠性 | (RAILWAY ROLLING STOCK. RELIABILITY,AND FIRST STEPS IN MAINTAINABILITY AND AVAIBILITY.) |
| NF F01-310 | 鐵路車輛.訂貨時,廠家及其供貨者之間提供技術的規定 | (RAILWAY ROLLING STOCK. DELIMITATION OF TECHNICAL ALLOWANCES BETWEEN THE CONSTRUCTORS AND THEIR SUPPLIERS FOR THE EXECUTION OF AN ORDER.) |
| NF F01-322 | 鐵路設施.鐵路車輛用電氣設備.透空式結構的電力電阻器規則 | (Railway applications - Electric equipment for rolling stock - Rules for power resistors of open construction.) |
| NF F01-373 | 鐵路設施.鐵路車輛.沖擊和振動試驗 | (Railway applications - Rolling stock equipment - Shock and vibration tests.) |
| NF F01-411 | 鐵路車輛.鐵路車輛或相關耐久滑行引導車用的液壓阻尼器 | (RAILWAY ROLLING STOCK. HYDRAULIC DAMPERS FOR RAILWAY OR RELATED PERMANENT GUIDING VEHICLES.) |
| NF F01-492-1 | 鐵路車輛.玻璃門窗(窗戶及其它).第1部分. | (RAILWAY ROLLING STOCK. GLASS BAYS (WINDOWS AND OTHER). PART 1.) |
| NF F01-492-2 | 鐵路車輛.玻璃門窗.第2部分:幾何公差 | (RAILWAY ROLLING STOCK. GLASS BAYS. PART 2 : GEOMETRICAL MARGES.) |
| NF F01-502 | 鐵路車輛.坡度過渡車輛的行駛 | (ROLLING STOCK. RUNNING OVER TRANSITION FROM ONE GRADIENT TO ANOTHER.) |
| NF F01-510 | 鐵路車輛.車上的食品保持和加工的環境條件 | (RAILWAY ROLLING STOCK. ENVIRONNEMENT CONDITIONS SUSTAINED OR PRODUCED BY DEVICES OR ORGANS IN VEHICLES.) |
| NF F01-701 | 米制鐵軌車輛用125和130mm輪箍的安裝 | (RAILWAY TRANSPORT EQUIPMENT. FITTING 125 AND 130 MM TYRES FOR METRE GAUGE ROLLING STOCK.) |
| NF F01-802 | 鐵路車輛.分類和試驗的定義 | (ROLLING STOCK. CLASSIFICATION AND DEFINITION OF TESTS.) |
| NF F01-810 | 鐵路車輛.非合金鋼或低合金鋼電弧焊和電阻焊接頭.設計與施工規則 | (RAILWAY ROLLING STOCK. ARC AND RESISTANCE WELDED JOINTS OF UNALLOYED OR LOW ALLOYED STEELS. RULES FOR CONCEPTION AND REALIZATION.) |
| NF F01-812-1 | 鐵路車輛.鋼的電弧和電阻焊接接頭.第1部分:對接焊和角接接頭中缺陷驗收準則 | (RAILWAY ROLLING STOCK. ART AND RESISTANCE WELDED JOINTS OF STEELS. PART 1 : ACCEPTANCE CRITERIA FOR DEFECTS IN WELDED BUTT AND CORNER JOINTS.) |
| NF F01-815 | 鐵路車輛.橡膠基彈性部件 | (RAILWAY ROLLING STOCK. RUBBER-BASED ELASTIC PARTS.) |
| NF F01-820 | 鐵路車輛.車身用鋁合金焊接接頭(焊縫) | (RAILWAY ROLLING STOCK. WELDED JOINTS OF PRODUCTS IN ALUMINIUM ALLOY FOR BODYWORK. CHARACTERIZATION.) |
| NF F02-049 | 鐵路車輛.鎖緊連接的液壓緊固和放松. 噴油導管 | (RAILWAY TRANSPORT EQUIPMENT. OIL INJECTION DUCTS FOR HYDRAULIC SCOTCHING AND UNSCOTCHING OF TIGHTENED ASSEMBLIES.) |
| NF F02-049M1 | 鐵路車輛.鎖緊連接的液壓緊固和松釋噴油導管 | () |
| NF F02-303 | 鐵路車輛.齒輪及傳動齒輪 | (RAILWAY ROLLING STOCK. GEARS PINIONS AND WHEELS.) |
| NF F02-403 | 鐵路運輸設備.標準軌距車輛用140MM輪箍的安裝 | (RAILWAY TRANSPORT EQUIPMENT. FITTING 140 MM TYRES FOR STANDARD GAUGE ROLLING STOCK.) |
| NF F03-004 | 鐵路車輛.金屬螺釘. 沉頭和半沉頭. Ａ級. 符號Ｆ和ＦＢ | (Railway rolling stock. Grade A. Countersunk and raised countersunk notched head machine screws. Symbols F and FB.) |
| NF F03-005 | 鐵路車輛.金屬螺釘. 圓柱頭和球面圓柱頭. Ａ級. 符號Ｃ和ＣＲ | (Railway rolling stock. Grade A. Notched cheese head or notched dome head machine screws. Symbols C and CR.) |
| NF F03-006 | 鐵路車輛.開槽懦半沉頭螺釘一螺母. Ａ級. 符號ＦＢＰ | (Railway rolling stock. Grade A. Slotted or notched raised countersunk head screws nuts. Symbol FBP.) |
| NF F03-007 | 鐵路車輛.半球形螺母和球形圓柱螺母, Ａ級, 符號Ｒ和ＣＲ | (Railway rolling stock. Grade A. Round head and domed head nuts. Symbols R and CR.) |
| NF F03-016 | 鐵路車輛.開槽沉頭螺釘, 螺母. Ａ級. ＦＰ | (Railway rolling stock. Grade A. Slotted countersunk head screws nuts. Symbol FP.) |
| NF F03-301 | 鐵路車輛.貨車拖車和類似車輛的負載和狀態 | (ROLLING STOCK. WEIGHTS AND STATES OF LOAD OF WAGONS AND ASSIMILATED VEHICLES FREIGHT.) |
| NF F07-021 | 鐵路固定設備和車輛.電磁干擾.輻射場的測量 | (RAILWAY FIXED EQUIPMENT AND ROLLING STOCK. ELECTROMAGNETIC DISTURBANCES. MEASURMENT OF RADIANT FIELD.) |
| NF F07-022 | 鐵路固定設備和車輛.電磁干擾.縱向感應的電動勢測量 | (RAILWAY FIXED EQUIPMENT AND ROLLING STOCK. ELECTROMAGNETIC DISTURBANCES. MEASUREMENT OF LONGITUDINAL INDUCED ELECTROMOTIVE FORCE.) |
| NF F07-024 | 鐵路固定設備和車輛.電磁干攏.鐵路信號和電信電纜50H2頻率的屏蔽系數的確定和測量 | (RAILWAY FIXED EQUIPMENT AND ROLLING STOCK. ELECTROMAGNETIC DISTURBANCES. DETERMINATION AND MEASUREMENT OF SCREENING FACTOR WITH A FREQUENCY OF 50 HZ OF RAILWAY SIGNALLING AND TELECOMMUNICATION CABLES.) |
| NF F07-121-3-1 | 鐵路應用.電磁兼容性.第3-1部分:滾動運貨.火車和完整車輛 | (Railway applications - Electromagnetic compatibility - Part 3-1 : rolling stock - Train and complete vehicle.) |
| NF F07-238 | 鐵路設施.機車車輛和列車探測系統間的兼容性 | (Railway applications - Compatibility between rolling stock and train detection systems.) |
| NF F10-101 | 鐵路滾動存貨車.滾動貨車緩沖.一般規則 | (RAILWAY ROLLING STOCK. BUFFERS FOR FREIGHT ROLLING STOCK. GENERAL RULES.) |
| NF F10-102 | 鐵路車輛.貨物運輸車緩沖.車殼和元件部分 | (RAILWAY ROLLING STOCK. BUFFERS FOR FREIGHT ROLLING STOCK. ENVELOPES AND COMPONENT PARTS.) |
| NF F10-103 | 鐵路滾動存貨車.滾動貨車緩沖.105MM沖程彈性系統 | (RAILWAY ROLLING STOCK. BUFFERS FOR FREIGHT ROLLING STOCK. ELASTIC SYSTEM OF 105 MM STROKE.) |
| NF F10-104 | 鐵路滾動存貨車.滾動貨車緩沖.130MM和150MM沖程彈性系統 | (RAILWAY ROLLING STOCK. BUFFERS FOR FREIGHT ROLLING STOCK. ELASTIC SYSTEM OF 130 MM AND 150 MM STROKE.) |
| NF F10-105 | 鐵路滾動存貨車.滾動貨車緩沖.緩沖和組成部分的試驗和試驗方法 | (RAILWAY ROLLING STOCK. BUFFERS FOR FREIGHT ROLLING STOCK. TESTS AND TESTS METHODS FOR BUFFERS AND THEIR COMPONENT PARTS.) |
| NF F10-402 | 鐵路車輛. 1MN牽引鉤 | (Railway transport equipment. Coupling hooks of 1 mn.) |
| NF F10-404 | 鐵路車輛.0.25MN的聯接螺釘 | (Railway transport equipment. Coupling screw of 0,25 mn.) |
| NF F10-405 | 鐵路車輛.０. ２５ＭＮ牽引鉤 | (Rolling stock. 0,25 mn coupling hook.) |
| NF F10-407 | 鐵路車輸. ０. ８５ＭＮ聯接螺桿 | (Railway transport equipment. Coupling screw of 0,85 mn.) |
| NF F10-408 | 鐵路車輛. ０. ６０ＭＮ牽引鉤 | (Rolling stock. 0,60 mn coupling hook.) |
| NF F10-409 | 鐵路車輛.50噸拉緊螺桿 | (ROLLING STOCK. 0,50 MN COUPLING SCREW.) |
| NF F10-410 | 鐵路車輛.1.5MN的牽引鉤 | (ROLLING STOCK. 1,5 MN COUPLING HOOK.) |
| NF F10-411 | 鐵路車輛.1.35MN的連接螺桿 | (ROLLING STOCK. 1,35 MN COUPLING SCREW.) |
| NF F10-420 | 鐵路車輛.牽引車輛和拖車用車鉤、牽引裝置及驅動齒輪裝置 | (Railway rolling stock. Coupling, traction and driving gears for tractive and hauled stock.) |
| NF F11-001 | 鐵路車輛.手制動. 手輪. 外形尺寸和互換尺寸. 安裝 | (ROLLING STOCK. HAND BRAKE WHEELS.) |
| NF F11-002 | 鐵路車輛.手制動. 手柄. 外形尺寸和互換尺寸. 安裝 | (RAILWAY TRANSPORT EQUIPMENT. HAND BRAKE. HANDLES. OVERALL AND INTERCHANGEABILITY DIMENSIONS. MOUNTING.) |
| NF F11-003 | 鐵路車輛.手制動. 螺釘和螺母. 螺距和螺紋剖面. 螺釘傳動 | (RAILWAY TRANSPORT EQUIPMENT. HAND BRAKE. SCREWS AND NUTS. PITCHES AND PROFILES. SCREW DRIVES.) |
| NF F11-005 | 鐵路車輛.壓縮空氣制動裝置. 維修車間鑒定牌 | (RAILWAY TRANSPORT EQUIPMENT. AIR BRAKE EQUIPMENT. MAINTENANCE WORK-SHOP IDENTIFICATION BADGES.) |
| NF F11-010 | 鐵路車輛.液壓動力系統.圖解符號 | (RAILWAY ROLLING STOCK. FLUID POWER SYSTEMS. GRAPHIC SYMBOLS.) |
| NF F11-013 | 鐵路車輛.壓縮空氣制動. ２５mm自動制動裝置連接頭 | (Railway rolling stock. Compressed-air brake. Coupling head for 25 mm automatic brake pipe.) |
| NF F11-014 | 鐵路車輛.壓縮空氣制動裝置. 直通式自動制動連接頭 | (RAILWAY TRANSPORT EQUIPMENT. AIR BRAKE. DIRECT BRAKE COUPLING HEAD.) |
| NF F11-015 | 鐵路車輛. 空氣導管. ２５mm主要導管的連接頭 | (Railway rolling stock. Air pipes. Coupling head for 25 mm main brake pipe.) |
| NF F11-016 | 鐵路車輛.壓縮空氣制動裝置和空氣導管.25mm聯軸節的連接 | (RAILWAY TRANSPORT EQUIPMENT. AIR BRAKE AND AIR PIPES. 25 MM BRAKE-HOSE CONNECTING NIPPLE.) |
| NF F11-017 | 鐵路車輛.壓縮空氣制動裝置和空氣導管. ２５mm摩擦離合器 | (RAILWAY TRANSPORT EQUIPMENT. AIR BRAKE AND AIR PIPES. 25 MM HALF-COUPLINGS.) |
| NF F11-018 | 鐵路車輛.壓縮空氣制動裝置和空氣導管. 直徑為２５mm的管用軟管 | (RAILWAY TRANSPORT EQUIPMENT. AIR BRAKE AND AIR PIPES. FLEXIBLE HOSES FOR 25 MM PIPES.) |
| NF F11-025 | 鐵路車輛.帶Ｏ形密封圈的儀器管路的連接 | (RAILWAY TRACTION AND ROLLING STOCK. PIPEWORK CONNECTIONS ON DEVICES FITTED WITH O-RING SEAL PLUGS. INTERFACES.) |
| NF F11-027 | 鐵路車輛.綜合氣動管路控制板 | (RAILWAY ROLLING STOCK. PANELS WITH INTEGRATED PNEUMATIC CIRCUITS.) |
| NF F11-040 | 裝空氣或氮?dú)庥玫牟唤鸬囊话銐毫θ萜?第3部分:用于鐵路運輸車輛空氣制動和輔助氣動設備的鋼制壓力容器 | (Simple unfired pressure vessels designed to contain air or nitrogen. Part 3 : steel pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock.) |
| NF F11-042 | 裝空氣或氮?dú)庥玫囊话悴唤鸬膲毫θ萜?第4部分:用于鐵路運輸車輛空氣制動和輻助氣動設備的鋁合金壓力容器 | (Simple unfired pressure vessels designed to contain air or nirogen. Part 4 : aluminium alloy pressure vessels designed for air braking equipment and auxiliary penumatic equipment for railway rolling stock.) |
| NF F11-044 | 鐵路車輛.剎車裝置及氣動裝置用復合材料制壓縮空氣罐 | (RAILWAY ROLLING STOCK. COMPRESSED AIR TANK IN COMPOSITE MATERIAL DESIGNED FOR BRAKING EQUIPMENT AND PNEUMATIC EQUIPMENT.) |
| NF F11-050 | 鐵路車輛. 帶Ｏ形密封圈的塞子 | (RAILWAY TRACTION AND ROLLING STOCK-PLUGS WITH O-RING SEAL.) |
| NF F11-051 | 鐵路車輛.O形密封圈圈的選擇,標志.尺寸和公差 | (RAILWAY ROLLING STOCK. SELECTION OF O RINGS. DESIGNATION,DIMENSIONS AND TOLERANCES.) |
| NF F11-069 | 鐵路車輛.氣動部件檢驗設備的用接頭 | (ROLLING STOCK. CONNECTIONS FOR PNEUMATIC-GEAR CONTROL EQUIPMENT.) |
| NF F11-070 | 鐵路車輛.軌道車和類似車輛壓縮空氣管路用快速連接和快速耦合 | (RAILWAY ROLLING STOCK. QUICK HOSE ASSEMBLIES AND QUICK-ACTION COUPLINGS FOR THE COMPRESSED-AIR CIRCUITS OF RAIL AND RAIL-ASSIMILABLE VEHICLES.) |
| NF F11-100 | 鐵路車輛.氣動裝置和電路用壓縮空氣的質量 | (Railway rolling stock. Quality of compressed air for pneumatic apparatuses and circuits use.) |
| NF F11-101 | 鐵路車輛.有凸緣的氣動要裝置的接頭和密封接觸面 | (Railway rolling stock. Connecting and airtight interfaces for flanged pneumatic apparatuses.) |
| NF F11-102 | 鐵路車輛.氣動和電氣動器具防止外部沖擊的保護程度 | (RAILWAY ROLLING STOCK. DEGREES OF PROTECTION AGAINST EXTERNAL ATTACKS TO PNEUMATIC AND ELECTROPNEUMATIC APPARATUSES.) |
| NF F11-281 | 鐵路車輛.腳闡金屬型芯的鑒定程序 | (RAILWAY ROLLING STOCK. APPROVAL PROCEDURE FOR BRAKE-SHOES INSERTS.) |
| NF F11-285 | 鐵路車輛.閘板的鑒定程序 | (RAILWAY ROLLING STOCK. APPROVAL PROCEDURE FOR BRAKE DISKS.) |
| NF F11-286 | 鐵路車輛.盤式制動器生產線的控制程序 | (RAILWAY ROLLING STOCK. APPROVAL PROCEDURE FOR DISK BRAKE LININGS.) |
| NF F11-291 | 鐵路車輛.用復合材料制的制動板 | (RAILWAY ROLLING STOCK. BRAKE SHOE INSERTS MADE OF COMPOSITE MATERIALS.) |
| NF F11-292 | 鐵路車輛.用焙燒材料制的剎車閘瓦托 | (RAILWAY ROLLING STOCK. BRAKE SHOE INSERTS MADE OF SINTERED MATERIALS.) |
| NF F11-296 | 鐵路車輛.用復合材料制的圓制動墊 | (RAILWAY ROLLING STOCK. DISK BRAKE LININGS MADE OF COMPOSITE MATERIALS.) |
| NF F11-297 | 鐵路車輛.金屬粉末燒結材料制盤式制動襯片 | (RAILWAY ROLLING STOCK. DISK BRAKE LININGS MADE OF SINTERED MATERIALS.) |
| NF F11-380 | 鐵路車輛.壓縮空氣橡膠軟管 | (RAILWAY ROLLING STOCK. COMPRESSED-AIR RUBBER HOSES.) |
| NF F11-400 | 鐵路車輛. 可折卸支架的制動塊,概述 | (RAILWAY ROLLING STOCK. BRAKE-SHOES WITH REMOVABLE INSERTS. GENERAL.) |
| NF F11-401 | 鐵路車輛. 可折卸支架的制動塊. 銷鐵支架低摩擦用閘瓦托 | (RAILWAY ROLLING STOCK. BRAKE-SHOES WITH REMOVABLE INSERTS. BRAKE-SHOES INSERT HOLDERS FOR INSERTS MADE OF CAST-IRON AND WITH A LOW COEFFICIENT OF FRICTION.) |
| NF F11-402 | 鐵路車輛. 可拆卸支架的制動塊.磷鑄件２５０和３２０制動塊 | (RAILWAY ROLLING STOCK. BRAKE-SHOES WITH REMOVABLE INSERTS. 250 MM AND 320 MM INSERTS,MADE OF PHOSPHOROUS CAST IRON.) |
| NF F11-403 | 鐵路車輛. 可拆卸支架的制動塊.用非鑄件的其它低摩擦系數材料制的２５０和３００制動塊 | (RAILWAY ROLLING STOCK. BRAKE-SHOES WITH REMOVABLE INSERTS. 250 MM AND 320 MM INSERTS,MADE OF MATERIALS WITH A LOW COEFFICIENT OF FRICTION OTHER THAN CAST IRON.) |
| NF F11-404 | 鐵路車輛. 可拆卸支架的制動塊, 高摩擦系數支架用閘瓦托 | (RAILWAY ROLLING STOCK. BRAKE-SHOES WITH REMOVABLE INSERTS. BRAKE-SHOES INSERT HOLDERS FOR INSERTS WITH A HIGH COEFFICIENT OF FRICTION.) |
| NF F11-405 | 鐵路車輛. 可拆卸支架加制動塊. 高摩擦系數材料制２５０和３００制動塊 | (RAILWAY ROLLING STOCK. BRAKE-SHOES WITH REMOVABLE INSERTS. 250 MM AND 320 MM INSERTS,MADE OF MATERIALS WITH A HIGH COEFFICIENT OF FRICTION.) |
| NF F11-410 | 鐵路車輛. 盤式制動器.概述 | (RAILWAY ROLLING STOCK. DISK BRAKES. GENERAL.) |
| NF F11-411 | 鐵路車輛. 盤式制動器. 直徑為５９０. ６１０和６４０盤式制動墊片 | (RAILWAY ROLLING STOCK. DISK BRAKES. BRAKE LINING HOLDER,FOR DISKS OF DIAMETER 590,610 AND 640 MM.) |
| NF F11-412 | 鐵路車輛. 盤式制動器. 直徑為５９０. ６１０和６４０盤用有機物質制動墊片 | (RAILWAY ROLLING STOCK. DISK BRAKES. BRAKE LININGS,MADE OF ORGANIC MATERIALS,FOR DISKS OF DIAMETER 590,610 AND 640 MM.) |
| NF F11-414 | 鐵路車輛.盤式制動器.可交換性.尺寸 | (RAILWAY ROLLING STOCK. DISKS BRAKE. INTERCHANGEABILITY. DIMENSIONS.) |
| NF F11-415 | 鐵路車輛.帶鑄鐵制齒冠的制動盤 | (RAILWAY ROLLING STOCK. BRAKE DISCS WITH CAST IRON RING.) |
| NF F11-416 | 鐵路車輛.帶鋼環的制動圓板 | (RAILWAY ROLLING STOCK. BRAKE DISCS WITH STEEL RING.) |
| NF F11-600 | 鐵路車輛.氣動設備和電氣動設備的氣密性試驗 | (RAILWAY ROLLING. AIRTIGHTNESS TESTS FOR PNEUMATIC AND ELECTROPNEUMATIC EQUIPEMENT.) |
| NF F11-806 | 鐵路車輛.壓縮空氣電路用截止塞閥 | (RAILWAY ROLLING STOCK. SHUT-OFF PLUG VALVES, FOR COMPRESSED AIR CIRCUITS.) |
| NF F12-001 | 鐵路車輛.客車內頂燈. 外形尺寸.安裝 | (RAILWAY TRANSPORT EQUIPMENT. CEILING LIGHTS. CLEARANCE GAUGES AND FIXINGS.) |
| NF F12-100 | 鐵路設施.公共交通系統鐵路車輛用電力照明 | (Railway applications - Electrical lighting for rolling stock in public transport systems.) |
| NF F12-445 | 鐵路車輛.聚碳酸酯光漫射器 | (ROLLING STOCK. LIGHT DIFFUSERS MADE OF POLYCARBONATE.) |
| NF F13-011 | 鐵路車輛.空調.墻上換氣通道用的穿越道及尺寸 | (RAILWAY ROLLING STOCK. AIRCONDITIONING. DIMENSIONS AND CLEARANCES RESERVED FOR VG-LENGTH AIR CONDUITS.) |
| NF F13-012-0 | 鐵路車輛.空調系統舒適度的測定.試驗.概述 | (RAILWAY ROLLING STOCK. DETERMINATION OF COMFORT CONNECTED WITH AN AIR-CONDITIONING SYSTEM FOR RAILWAY VEHICLES. TEST. GENRALITY.) |
| NF F13-012-1 | 鐵路車輛.空調系統舒適度的測定.通風試驗 | (RAILWAY ROLLING STOCK. DETERMINATION OF COMFORT CONNECTED WITH AN AIR-CONDITIONING SYSTEM FOR RAILWAU VEHICLES. AERAULIC TEST.) |
| NF F13-012-2 | 鐵路車輛.鐵路車輛用空調系統舒適度的測定.熱試驗 | (RAILWAY ROLLING STOCK. DETERMINATION OF COMFORT CONNECTED WITH AN AIR-CONDITIONING SYSTEM FOR RAILWAY VEHICLES. THERMIC TEST.) |
| NF F13-012-3 | 鐵路車輛.空調系統舒適度的測定.電氣試驗 | (RAILWAY ROLLING STOCK. DETERMINATION OF COMFORT CONNECTED WITH AN AIR-CONDITIONING SYSTEM FOR RAILWAY VEHICLES. ELECTRICAL TEST.) |
| NF F13-012-5 | 鐵路車輛.空調系統舒適度的測定.安全試驗 | (RAILWAY ROLLING STOCK. DETERMINATION OF COMFORT CONNECTED WITH AN AIR-CONDITIONING SYSTEM FOR RAILWAY VEHICLES. SAFETY TEST.) |
| NF F13-012-6 | 鐵路車輛.空調系統舒適度的測定.驗收規定 | (RAILWAY ROLLING STOCK. DETERMINATION OF COMFORT CONNECTED WITH AN AIR-CONDITIONING SYSTEM FOR RAILWAY VEHICLES. REQUIREMENTS FOR ACCEPTANCE.) |
| NF F13-013 | 鐵路車輛.空調系統空氣密封性試驗 | (RAILWAY ROLLING STOCK. AIRTIGHTNESS TEST OF AN AIR-CONDITIONING SYSTEM FOR RAILWAY VEHICLES.) |
| NF F13-016-1 | 鐵路設施.主干線機車車輛空調設備.第1部分:舒適度參數 | (Railway applications - Air conditioning for main line rolling stock - Part 1 : comfort parameters.) |
| NF F13-209 | 鐵路車輛.非機械通風的電采暖散熱器 | (RAILWAY ROLLING STOCK. ELECTRIC RADIATORS,WITHOUT MECHANICAL VENTILATION.) |
| NF F13-825 | 鐵路車輛.空調或通風裝置用合成纖維末道空氣過濾網 | (RAILWAY ROLLING STOCK. FINISHER AIR FILTERS, WITH SYNTHETIC FIBRES, FOR CONDITIONING OR VENTILATING UNITS.) |
| NF F13-835 | 鐵路車輛.有防護裝置的機械通風電采暖器具 | (RAILWAY ROLLING STOCK. ELECTRIC AIR HEATERS WITH SHIELDED ELEMENTS,WITH FORCED VENTILATION.) |
| NF F14-003 | 鐵路車輛.鐵路車輛信號裝置.活動信號裝置. 插旗架. 特性 | (Rolling stock. Flag bracket. Removable signalling.) |
| NF F14-024 | 鐵路車輛.速度、信號位置和行程記錄--指示器.性能與合格要求 | (RAILWAY ROLLING STOCK. SPEED, SIGNAL POSITION AND TRAVEL RECORDER-INDICATOR. CHARACTERISTIC AND APPROVAL REQUIREMENTS.) |
| NF F14-402 | 鐵路車輛.鐵路車輛信號裝置. 固定信號.電信號.位置和特性 | (RAILWAY TRANSPORT EQUIPMENT. SIGNALLING EQUIPMENT FOR RAIL VEHICLES. FIXED SIGNALLING. ELECTRIC SIGNALS. ARRANGEMENT AND CHARACTERISTICS.) |
| NF F15-001 | 鐵路車輛.司機室和工作臺的通道.結構要求 | (ROLLING STOCK. ACCESS TO DRIVER`S CABS AND PLATFORMS. CONSTRUCTIONAL REQUIREMENTS.) |
| NF F15-002 | 鐵路車輛.動力機組前端高部位通道 | (ROLLING STOCK. ACCESS TO THE HIGHER PART OF THE FRONT-ENDS OF POWER UNITS. CONSTRUCTIONAL REQUIREMENTS.) |
| NF F15-003 | 鐵路車輛.調軌車手扶欄桿的位置 | (ROLLING STOCK. POSITIONING OF SHUNTERS` HANDRAILS.) |
| NF F15-004 | 鐵路車輛.操作部件用手柄和扶手 | (ROLLING STOCK. HANDLES AND HANDRAILS FOR SHUNTERS.) |
| NF F15-818 | 鐵路車輛.正面的擋風玻璃 | (RAILWAY ROLLING STOCK. FRONTAL WINDSCREENS.) |
| NF F16-101 | 鐵路車輛.防火性能.材料的選擇 | (ROLLING STOCK. FIRE BEHAVIOUR. MATERIALS CHOOSING.) |
| NF F16-102 | 鐵路車輛.防火性能.電器設備管用材料的選擇、應用 | (Railway rolling stock. Fire behaviour. Materials choosing, application for electric equipments.) |
| NF F16-103 | 鐵路車輛.消防.設計安排 | (ROLLING STOCK. FIRE PROTECTION AND FIRE FIGHTING. DESIGN ARRANGEMENTS.) |
| NF F16-201 | 鐵路車輛.座席耐火試驗 | (RAILWAY ROLLING STOCK. FIRE RESISTANCE TEST FOR SEATS.) |
| NF F17-001 | 鐵路車輛.鐵路車輛車體的結構要求 | (Railway applications - Structural requirements of railway vehicle bodies.) |
| NF F17-011 | 鐵路車輛.車輛及其附助裝置空氣密封性的測定方法.試驗和結果的說明 | (RAILWAY ROLLING STOCK. MEASUREMENT METHODS OF AIRTIGHTNESS OF RAILWAY VEHICLE AND ITS ELEMENTS. TESTS AND INTERPRETATION OF RESULTS.) |
| NF F18-001 | 鐵路車輛.錳鋼磨損板.特性.焊接規定 | (ROLLING STOCK. WEARING PLATES MADE OF MANGANESES STEEL. CHARACTERISTICS. WELDING PRESCRIPTIONS.) |
| NF F18-101 | 鐵路車輛.軸用的轉動軸箱.內軸頸.術語.概念 | (RAILWAY ROLLING STOCK. ROLLER-BEARING AXLE-BOXES FOR WHEELSETS WITH OUTSIDE AXLE-JOURNALS.) |
| NF F18-102 | 鐵路車輛.帶外軸頸車軸用軸承車軸箱.允差.表面狀況 | (RAILWAY ROLLING STOCK. ROLLER BEARING AXLE BOXES FOR OUTSIDE AXLE JOURNALS. TOLERANCES. SURFACE FINISH.) |
| NF F18-103 | 鐵路車輛.帶外軸頸車軸用軸承車軸箱.材料.質量 | (RAILWAY ROLLING STOCK. ROLLER BEARING AXLE BOXES FOR OUTSIDE AXLE JOURNALS. MATERIALS. QUALITY.) |
| NF F18-201 | 鐵路車輛.滾動軸承箱箱體的試驗方法.在軸箱試驗機上進行熱試驗 | (RAILWAY ROLLING STOCK. METHOD OF TESTING ROLLER BEARING AXLE-BOX CASES. THERMAL TEST ON AXLE BOXES TEST MACHINE.) |
| NF F18-202 | 鐵路車輛.滾動軸箱的試驗方法.在軸箱試驗機上進行疲勞強度的試驗 | (RAILWAY ROLLING STOCK. METHOD OF TESTING ROLLING BEARINGS FOR AXLE-BOXES. ENDURING TEST ON AXLE BOXES TEST MACHINE.) |
| NF F18-206 | 鐵路車輛用具.軸箱.性能試驗 | (Railway applications. Axleboxes. Performance testing.) |
| NF F18-831 | 鐵路車輛.裝置和牽引機車用滾動軸承.質量要求 | (RAILWAY ROLLING STOCK. ROLLING BEARINGS FOR DRIVES AND TRACTION MOTORS. QUALITY REQUIREMENTS.) |
| NF F18-832 | 鐵路車輛.軸箱用的滾柱軸承.質量規定 | (RAILWAY ROLLING STOCK. AXLEBOX ROLLER BEARINGS. QUALITY REQUIREMENTS.) |
| NF F19-141-1 | 鐵路車輛.通過在車體和元件部分噴漆進行防護和裝飾 | (RAILWAY ROLLING STOCK. PROTECTION AND ORNEMENTATION BY PAINTING OF CAR BODY AND COMPONENTS PARTS. PART 1 : GENERAL PRESCRIPTIONS.) |
| NF F19-141-2 | 鐵路車輛.通過在車體和元件部分噴漆進行防護和裝飾.第2部分:噴涂系統的裝飾性和實用性 | (RAILWAY ROLLING STOCK. PROTECTION AND ORNEMENTATION BY PAINTING OF CAR BODY AND COMPONENTS PARTS. PART 2 : DESCRIPTION AND UTILIZATION OF PAINT SYSTEMS (EXCEPT WAGONS).) |
| NF F19-201 | 鐵路車輛.涂料和標志.一般規定和試驗方法 | (Railway rolling stock. Paint materials and marks. General instructions and tests method.) |
| NF F19-211 | 鐵路車輛.機車部件鑒定用的醇酸樹脂 | (RAILWAY ROLLING STOCK. ALKYD RESIN PAINTS FOR MARKING PARTS OF ROLLING STOCK.) |
| NF F19-212 | 鐵路車輛.用轉印法打印車箱標識牌和銘牌用清漆 | (RAILWAY ROLLING STOCK. VARNISH FOR APPLICATION OF MARKS AND REGISTRATIONS,OF VEHICLES,BY TRANSFER.) |
| NF F19-216 | 鐵路車輛.洗滌底漆 | (RAILWAY ROLLING STOCK. WASH PRIMER.) |
| NF F19-217 | 鐵路車輛.鍍鋅層的高含量 | (RAILWAY ROLLING STOCK. HIGH CONTENT OF ZINC COATING.) |
| NF F19-218 | 鐵路車輛.溫度高達350℃用防腐蝕涂料 | (RAILWAY ROLLING STOCK. ANTICORROSIVE PAINT RESISTANT TO TEMPERATURES UP TO 350 DEGREES CELSIUS.) |
| NF F19-219 | 鐵路車輛.工廠底漆 | (RAILWAY ROLLING STOCK. SHOP PRIMER.) |
| NF F19-220 | 鐵路車輛.環氧樹脂涂料.涂二層的保護和裝飾體系 | (RAILWAY ROLLING STOCK. EPOXY RESIN PAINTS. TWO-COAT PROTECTION AND DECORATION SYSTEM.) |
| NF F19-222 | 鐵路車輛.醇酸樹脂涂料.單層保護體系 | (RAILWAY ROLLING STOCK. ALKYD RESIN PAINTS. MONOCOAT PROTECTION SYSTEM.) |
| NF F19-223 | 鐵路車輛.環氧樹脂漆.應力條件下防腐保護裝置 | (RAILWAY ROLLING STOCK. EPOXY RESIN PAINTS. PROTECTION SYSTEM TO PREVENT THE CORROSION UNDER STRESS.) |
| NF F19-283 | 鐵路車輛.二層保護系統用的醇酸樹脂漆 | (RAILWAY ROLLING STOCK. ALKYD RESIN PAINTS USED TO PROVIDE A TWO-COAT PROTECTION.) |
| NF F19-292 | 鐵路車輛.最后檢修作業 | (RAILWAY ROLLING STOCK. TOUCH UP PRIMER.) |
| NF F19-293 | 鐵路車輛.涂料 | (RAILWAY ROLLING STOCK. PAINT.) |
| NF F19-295 | 鐵路車輛.高固態單涂層清漆 | (RAILWAY ROLLING STOCK. HIGH SOLID MONOCOAT PAINT.) |
| NF F19-296 | 鐵路滾動存貨車.用阻罩的油灰使用 | (RAILWAY ROLLING STOCK. PUTTY APPLIED USING SPATTLE.) |
| NF F19-301 | 鐵路車輛.雙層保護系統用水溶性涂料 | (RAILWAY ROLLING STOCK. PAINTS WATERBORNES WITH WATER USED TO PROVIDE A TWO-COAT PROTECTION.) |
| NF F19-302 | 鐵路車輛.三層保護系統用水溶性涂料 | (RAILWAY ROLLING STOCK. PAINTS WATERBORNES WITH WATER USED TO PROVIDE A THREE-COAT PROTECTION.) |
| NF F19-303 | 鐵路車輛.鋁和鋁合金用含水涂料單分子薄膜 | (RAILWAY ROLLING STOCK. PAINT MONOCOAT WATERBORNE WITH WATER USED TO ALUMINIUM AND ALUMINIUM`S ALLOIES.) |
| NF F19-350 | 鐵路滾動存貨車.線圈涂層板鋁和鋁合金 | (RAILWAY ROLLING STOCK. COIL COATED SHEETS ALUMINIUM AND ALUMINIUM ALLOYS.) |
| NF F19-351 | 鐵路車輛.連續涂覆焊接鋼 | (RAILWAY ROLLING STOCK. CONTINUOUSLY WELDABLE PRIMER COATED SHEET STEEL.) |
| NF F19-352 | 鐵路車輛.內部氣體容器涂料 | (RAILWAY ROLLING STOCK. INSIDE AIR TANK PAINT.) |
| NF F19-355 | 鐵路車輛.電泳覆層制件 | (RAILWAY ROLLING STOCK. CATAPHORECTIC COATING PIECES.) |
| NF F19-447 | 鐵路車輛.隔聲水基產品 | (RAILWAY ROLLING STOCK. SOUNDPROOFED WATER BASED PRODUCE.) |
| NF F19-449 | 鐵路車輛.隔聲瀝青產品 | (RAILWAY ROLLING STOCK. SOUNDPROOFED BITUMINOUS PRODUCE.) |
| NF F19-477 | 鐵路車輛.聚酯樹脂熱固性粉末涂料 | (RAILWAY ROLLING STOCK. THERMO SETTING POWDER PAINTS MADE OF POLYESTER RESINS.) |
| NF F19-478 | 鐵路車輛.熱固性環氧樹脂漆粉 | (ROLLING STOCK. THERMO SETTING POWDER PAINTS MADE OF EPOXY RESINS.) |
| NF F19-480 | 鐵路車輛.轉印法標記和記錄車輛 | (Railway rolling stock. Marks and registration of vehicles by transfer.) |
| NF F19-481 | 鐵路車輛.自粘標記 | (RAILWAY ROLLING STOCK. SELF ADHESIVE MARKS.) |
| NF F19-483 | 鐵路滾動存貨車.亂涂頂板型 | (RAILWAY ROLLING STOCK. GRAFFITI PROOF TAPE.) |
| NF F19-501 | 鐵路車輛.滾動軸承用的油脂試驗方法.在軸箱試驗機上進行疲勞強度的試驗 | (RAILWAY ROLLING STOCK. METHOD OF TESTING GREASES FOR AXLE BOXES TO ROLLING BEARINGS. ENDURING TEST ON AXLE BOSES TEST MACHINE.) |
| NF F19-502 | 鐵路車輛.滾動軸用的油脂試驗方法.在試驗機上進行碰撞和振動強度的試驗 | (RAILWAY ROLLING STOCK. TEST METHOD OF GREASES FOR AXLE-BOXES TO ROLLING BEARING. VIBRATIONS AND SHOCKS ENDURING TEST ON MACHINE “ROPECS“.) |
| NF F19-503 | 鐵路車輛.軸箱的滾軸承用潤滑脂試驗方法.潤滑脂氧化穩定性的動態試驗 | (RAILWAY ROLLING STOCK. TESTS METHOD OF GREASES FOR AXLE-BOXES TO ROLLING BEARINGS. DYNAMIC TEST FOR STABILITY TO OXYDATION OF GREASE.) |
| NF F19-504 | 鐵路車輛.滾動軸承軸箱潤滑脂試驗方法.“R2F“機潤滑穩定性試驗 | (RAILWAY ROLLING STOCK. METHOD OF TEST FOR GREASES FOR ROLLER BEARING AXLE-BOXES. GREASE SUITABILITY TEST ON THE “R2F“ MACHINE.) |
| NF F19-505 | 鐵路車輛.轉動軸箱用的潤滑油試驗方法.在試驗臺上進行振動、碰撞、旋轉的強力試驗 | (RAILWAY ROLLING STOCK. TESTING METHOD OF GREASES FOR AXLE-BOXES WITH ROLLING BEARINGS. VIBRATIONS,SHOCKS,ROTATION AND PRESSURES ENDURING TEST ON “ROPECACS“ MACHINE.) |
| NF F19-601 | 鐵路車輛.再循環密封抽水馬桶里使用的添加劑 | (RAILWAY ROLLING STOCK. ADDITIVE PRODUCT USED IN RECIRCULATION RETENTION TOILETS.) |
| NF F19-809-1 | 鐵路車輛.原動力機械運輸用耐高壓油.第1部分:礦物油 | (RAILWAY ROLLING STOCK. OILS AT “EXTREME PRESSURE“ FOR THE MECHANICAL TRANSMISSIONS OF MOTIVE POWER UNITS. PART 1 : MINERAL OILS.) |
| NF F19-809-2 | 鐵路車輛.原動力機械運輸用耐高壓Huiles.第2部分:高壓穩定油.一般要求 | (RAILWAY ROLLING STOCK. HUILES “EXTREME PRESSURE“ OILS FOR MECHANICAL TRANSMISSIONS OF MOTIVE POWER UNITS. PART 2 : HIGH THERMAL STABILITY OIL. GENERAL INSTRUCTIONS.) |
| NF F19-809-3 | 鐵路車輛.原動力機械運輸用耐高壓油.第3部分:高熱穩定性油.后部固定機械的耐久性試驗 | (RAILWAY ROLLING STOCK. “EXTREME PRESSURE“ OILS FOR MECHANICAL TRANSMISSIONS OF MOTIVE POWER UNITS. PART 3 : HIGH THERMAL STABILITY OIL. ENDURANCE TEST METHOD ON FIXED POST MACHINE.) |
| NF F19-813 | 鐵路機車.軸箱中球面軸承用的潤滑油.質量規定 | (RAILWAY ROLLING STOCK. GREASES USED AS LUBRICANTS OF ROLLER BEARING AXLEBOXES. QUALITY REQUIREMENTS.) |
| NF F21-001 | 鐵路車輛.導電弓.特性和試驗 | (Railway rolling stock. Pantographs. Characteristics and tests.) |
| NF F21-002 | 鐵路車輛.車頂和集電弓用的絕緣架.特性和試驗 | (RAILWAY ROLLING STOCK. INSULATORS FOR PANTOGRAPHS AND ROOF CABLES. CHARACTERISTICS AND TESTS.) |
| NF F21-206-1 | 鐵路應用.滾動運貨.導電弓架:特性和試驗.第1部分:主線車輛的導電弓架 | (Railway applications - Rolling stock - Pantographs : characteristics and tests - Part 1 : pantographs for main line vehicles.) |
| NF F21-206-2 | 鐵路應用.滾動運貨.導電弓架:特性和試驗.第2部分:地下鐵道和輕型鐵路車輛的導電弓架 | (Railway applications - Rolling stock - Pantographs : characteristics and tests - Part 2 : pantographs for metro and light rail vehicles.) |
| NF F24-003 | 鐵路車輛.輕型器材.管道系統.帶復曲支承面套筒和尾端的可拆卸管和前端連接器 | (RAILWAY TRANSPORT EQUIPMENT. WEIGHT-SAVING EQUIPMENT. PIPEWORK. REMOVABLE PIPE AND NOSE COUPLINGS WITH TORIC BEARING SURFACE SLEEVES AND TAIL ENDS.) |
| NF F24-004 | 鐵路車輛.輕型器材.管道系統.由三個工件組成的帶復曲支承面套筒和尾端的可拆卸管和前端連接器 | (RAILWAY TRANSPORT EQUIPMENT. WEIGHT-SAVING EQUIPMENT. PIPEWORK. 3-PIECE REMOVABLE PIPE AND NOSE COUPLINGS WITH TORIC BEARING SURFACE SLEEVES AND TAIL ENDS.) |
| NF F24-005 | 鐵路車輛.輕型器材.管道系統.擺動式管接頭 | (RAILWAY TRANSPORT EQUIPMENT. WEIGHT-SAVING EQUIPMENT. PIPEWORK. SWIVEL CONNECTORS.) |
| NF F31-001 | 鐵路車輛.墻上固定的液體肥皂分配器. 外形尺寸. 安裝 | (RAILWAY TRANSPORT EQUIPMENT. SOAP DISPENSER WITH WALL-FIXING GAUGES-FIXINGS.) |
| NF F31-002 | 鐵路車輛.厚度為4.5-10mm的滑動窗玻璃用活動鈕. 窗玻璃孔 | (RAILWAY TRANSPORT EQUIPMENT. OPERATING BUTTON FOR SLIDING GLASS PANELS OF 4.5 TO 10 MM THICKNESS. CORRESPONDING HOLE IN GLASS PANEL.) |
| NF F31-003 | 鐵路車輛.列車運行去向牌和懸掛裝置 | (Railway rolling stock. Destination or locative outside plate and suspension device.) |
| NF F31-004 | 鐵路車輛.列車運行去向牌用牌插 | (RAILWAY TRANSPORT EQUIPMENT. SUSPENSION HOOK FOR EXTERNALLY DISPLAYED DESTINATION OR LOCATING BOARD.) |
| NF F31-005 | 鐵路車輛.列車運行去向牌用卡鎖牌插 | (RAILWAY TRANSPORT EQUIPMENT. SUSPENSION HOOK WITH CATCH FOR EXTERNALLY DISPLAYED DESTINATION OR LOCATING BOARD.) |
| NF F31-011 | 鐵路車輛.非飲用水貯水箱的注水接頭 | (Rolling stock. Connecting pipe for filling non-drinking water tanks.) |
| NF F31-012 | 鐵路車輛.號碼牌 | (RAILWAY TRANSPORT EQUIPMENT. OUTSIDE NUMBER PLATE.) |
| NF F31-013 | 鐵路車輛.號碼牌架 | (RAILWAY TRANSPORT EQUIPMENT. NUMBER PLATE BRACKET.) |
| NF F31-014 | 鐵路車輛.公告牌用懸掛鉤 | (RAILWAY TRANSPORT EQUIPMENT.SIGN SUSPENSION HOOK.) |
| NF F31-016 | 鐵路車輛.標準軌距客車用折棚連接臺. 外形尺寸和安裝. 尺寸和公差 | (RAILWAY TRANSPORT EQUIPMENT. CONNECTION FOR FLANGE INTERCOMMUNICATION FOR STANDARD-GAUGE LINE STOCK. SIZE AND FASTENING-MEASUREMENTS AND TOLERANCES.) |
| NF F31-020 | 鐵路車輛.帶凸點的橡膠板. 使用型號 | (Railway rolling stock. Relief slabs made of ruber. Types to be used.) |
| NF F31-031 | 鐵路車輛.內鉸鏈?zhǔn)介T插鎖.互換性規格和功能規格 | (RAILWAY ROLLING STOCK. MORTISE LOCKS FOR INNER HINGED DOORS. INTERCHANGEABILITY SPECIFICATIONS AND FUNCTIONNAL SPECIFICATIONS.) |
| NF F31-032 | 鐵路車輛.內鉸鏈?zhǔn)介T板把鎖.互換性規格和功能規格 | (RAILWAY ROLLING STOCK. BRACKET LOCKS FOR INNER HINGED DOORS. INTERCHANGEABILITY SPECIFICATIONS AND FUNCTIONNAL SPECIFICAITONS.) |
| NF F31-041 | 鐵路車輛.車內旋轉門.互換性特征和功能特性 | (Railway rolling stock. Interior swing doors. Interchangeability characteristics and functional characteristics.) |
| NF F31-042 | 鐵路車輛.車內旋轉門構件.互換性特征和功能特性 | (Railway rolling stock. Component parts of interior swing doors. Interchangeability characteristics and functional characteristics.) |
| NF F31-045 | 鐵路車輛.手動內推拉門.互換性特征和功能特性 | (Railway rolling stock. Manual interior sliding doors. Interchangeability characteristics and functional characteristics.) |
| NF F31-046 | 鐵路車輛.手動內推拉門構件.互換性特征和功能特性 | (Railway rolling stock. Component parts of interior sliding doors. Interchangeability characteristics and functional characteristics.) |
| NF F31-051 | 鐵路車輛.長途客車. 臺階 | (RAILWAY TRANSPORT EQUIPMENT. MAIN-LINE PASSENGER ROLLING STOCK. COACH STEPS.) |
| NF F31-052 | 鐵路車輛.旅客通道的門.概論.術語 | (Railway rolling stock. Carriage doors. Generalities. Terminology.) |
| NF F31-053 | 鐵路車輛.車速在160-200KM/H范圍內的客車車門.特征.操作.檢查與試驗 | (Railway rolling stock. Carriage access doors with running speed included in 160 to 220 km/H range. Characteristics. Operating. Checks and tests.) |
| NF F31-054 | 鐵路車輛.旅客通道的門.特性.檢驗和試驗 | (RAILWAY ROLLING STOCK. CARRIAGE ACCESS DOORS. CHARACTERISTICS. OPERATING. CHECKS AND TESTS.) |
| NF F31-057 | 鐵路車輛.車速超過220km/H的客車車門.特性.操作.檢查與試驗 | (Railway rolling stock. Carriage access doors with running speed greater than 220 km/H. Characteristics. Operating. Checks and tests.) |
| NF F31-101 | 鐵路車輛. 客車. 行李車自推進車棚.車底架和箱形截面梁車架公差和尺寸特性 | (Rolling stock. Dimensional characteristics and tolerances for the underframes and body-shells of passanger coaches, vans and self-propelled units.) |
| NF F31-111 | 鐵路車輛.旅客列車車內的清洗 | (RAILWAY ROLLING STOCK. INNER CLEANING OF PASSENGER COACHING STOCK. DESIGN ARRANGEMENTS.) |
| NF F31-112 | 鐵路車輛.與石墨有關的防護.材料和擠壓產品的性能評定的試驗程序和方法 | (RAILWAY ROLLING STOCK. PROTECTION IN RELATION TO GRAFFITI. TESTS PROCEDURES AND METHODS OF VALUATION, BEHAVIOUR OF MATERIALS AND PRODUCTS OF EXPULSION.) |
| NF F31-116 | 鐵路車輛.座位臀點的測定 | (Railway rolling stock. Determination of the H point of seat.) |
| NF F31-118 | 鐵路車輛.防人為破壞面層.特性和試驗 | (RAILWAY ROLLING STOCK. VANDAL-PROOF COVERING. CHARACTERISTICS AND TESTS.) |
| NF F31-119 | 鐵路車輛.在靜電應力、疲勞應力、振動和沖擊應力下鐵路車輛座位的特性 | (RAILWAY ROLLING STOCK. BEHAVIOUR OF ROLLING STOCK`S SEATS AT STATICS STRESS, FATIGUE STRESS, VIBRATIONS STRESS AND SHOCKS STRESS.) |
| NF F31-446 | 鐵路車輛.帶裝飾面或保護面的復合材料板 | (ROLLING STOCK. COMPOSITE PANELS WITH DECORATED OR PROTECTED FACES.) |
| NF F31-447 | 鐵路車輛.表面用熱固性樹脂裝潢的膠合板 | (ROLLING STOCK. LAMINATED PANELS WITH DECORATED SURFACE,MADE OF THERMOSETTING RESINS.) |
| NF F31-496 | 鐵路車輛.聚乙烯水箱 | (RAILWAY ROLLING STOCK. WATER-TANKS MADE OF POLYETHYLENE.) |
| NF F31-812 | 鐵路車輛.橡膠地面覆蓋物 | (RAILWAY ROLLING STOCK. RUBBER FLOOR COVERINGS.) |
| NF F31-829 | 鐵路車輛.盥洗室用衛生紙 | (RAILWAY ROLLING STOCK. TOILET PAPER FOR RETENTION TOILETS.) |
| NF F32-101 | 鐵路車輛.雙軸裝卸轉向架. 標準架的測定. 幾何檢驗 | (RAILWAY TRANSPORT EQUIPMENT. TWO AXLE CARRYING BOGIE FRAMES. DETERMINATION OF REFERENCE ELEMENTS. GEOMETRICAL CHECKS.) |
| NF F33-004 | 鐵路車輛.制動重量. 工作狀態變換牌 | (Railway transport equipment. Wagons. Braked masses. Brake changeover plates.) |
| NF F33-005 | 鐵路車輛.鋼板彈簧. 拋物狀彈簧 | (ROLLING STOCK. LEAF SPRINGS. PARABOLIC SPRINGS.) |
| NF F33-006 | 鐵路車輛.鋼板彈簧. 拋物狀彈簧用可變截面的鋼板 | (ROLLING STOCK. LEAF SPRINGS. LEAVES WITH VARIABLE CROSS-SECTION FOR PARABOLIC SPRINGS.) |
| NF F33-010 | 鐵路車輛.車廂制動輪用火花檔板 | (Railway transport equipment. Spark arrestor plates for braked wagon wheels.) |
| NF F33-011 | 鐵路車輛.截貨車的尺寸特征 | (ROLLING STOCK. FREIGHT WAGON DIMENSIONAL CHARACTERISTICS FOR USE.) |
| NF F33-102 | 鐵路車輛.帶單軸鋼板彈簧懸掛裝置.有車體或無車體的貨車底架. 尺寸檢驗,公差 | (RAILWAY TRANSPORT EQUIPMENT. WAGON FRAMES WITH OR WITHOUT BODY WITH INDEPENDENT AXLES AND LEAF SPRING SUSPENSION. DIMENSIONAL CHECKS. TOLERANCES.) |
| NF F33-103 | 鐵路車輛.有車體或無車體的轉向架貨車底架. 尺寸檢驗. 公差 | (RAILWAY TRANSPORT EQUIPMENT. FRAMES OF BOGIE WAGON WITH OR WITHOUT BODY. DIMENSIONAL CHECKS. TOLERANCES.) |
| NF F33-104 | 鐵路車輛.有車體或無車體的由三個自由軸絞接的疊板彈簧支承的貨車底架. 尺寸檢驗. 公差 | (RAILWAY TRANSPORT EQUIPMENT. FRAMES WITH OR WITHOUT BODY OF ARTICULATED WAGONS INCLUDING 3 INDEPENDENT AXLES AND LEAF SPRING SUSPENSION. DIMENSIONAL CHECKS. TOLERANCES.) |
| NF F33-105 | 鐵路車輛. 帶或不車體的由3個轉向架組成的貨車底架的尺寸檢驗和公差 | (Rolling stock. Dimensional checking and tolerances of underframes with or without body of articulated wagons with 3 bogies.) |
| NF F33-401 | 鐵路車輛.標準軌距車輛用貨車和行李車板條和地板 | (ROLLING STOCK. SIDE PLANKS AND BOARDS FOR STANDAR-GAUGE LINE WAGONS AND VANS.) |
| NF F33-500-1 | 鐵路設施.新型和改造的貨運車輛的測量.第1部分:測量原則 | (Railway applications - Measuring of new and modified freight wagons - Part 1 : measuring principles.) |
| NF F33-500-2 | 鐵路設施.新型和改造的貨運車輛的測量.第2部分:帶平衡懸架的貨運車 | (Railway applications - Measuring of new and modified freight wagons - Part 2 : freight wagons with bogies.) |
| NF F33-500-3 | 鐵路設施.新型和改造的貨運車輛的測量.第3部分:兩輪副貨運車 | (Railway applications - Measuring of new and modified freight wagons - Part 3 : freight wagons with 2 wheelsets.) |
| NF F36-001 | 鐵路車輛.工業貨車. 標稱直徑為５０的通用“ＡＩＲ“ 調節接頭 | (RAILWAY TRANSPORT EQUIPMENT. INDUSTRIAL WAGONS. STANDARD 50 MM AIR COUPLING.) |
| NF F36-002 | 鐵路運輸設備.工業貨車.50MM氣體導徑管接頭 | (RAILWAY TRANSPORT EQUIPMENT. INDUSTRIAL WAGONS. 50 MM AIR ADAPTOR COUPLING.) |
| NF F36-003 | 鐵路車輛.工業貨車. 標稱直徑為５０的通用“ＡＩＲ“ 接頭的安裝 | (RAILWAY TRANSPORT EQUIPMENT. INDUSTRIAL WAGONS. PLUG FOR STANDARD 50 MM AIR COUPLING.) |
| NF F36-004 | 鐵路車輛.工業貨車. ＧＵＩＬＬＥＭＩＮ系統對稱快速半接頭的安裝 | (RAILWAY TRANSPORT EQUIPMENT. INDUSTRIAL WAGONS. ALTERNATIVES FOR FITTING STANDARD 50 MM AIR COUPLING.) |
| NF F36-005 | 鐵路車輛.工業貨車. 標準連接裝置. 覽表 | (RAILWAY TRANSPORT EQUIPMENT. INDUSTRIAL WAGONS. ALTERNATIVES FOR FITTING THE GUILLEMIN-TYPE QUICK-ACTION HALF-COUPLING.) |
| NF F36-010 | 鐵路運輸設備.工業貨車.標準化連接的列表 | (RAILWAY TRANSPORT EQUIPMENT. INDUSTRIAL WAGONS. LIST OF STANDARDIZED CONNECTIONS.) |
| NF F37-005 | 鐵路車輛.罐車. 加熱器. 識別牌. 檢驗牌和服務牌 | (Railway transport equipment. Tank wagons. Heater test and service indicator plate.) |
| NF F37-010 | 鐵路車輛.石油或類似品和酒精用罐車.容量標牌 | (Railway transport equipment. Tank wagons, removable tank wagons and tank container wagons. Gauging identification board.) |
| NF F37-012 | 液體或低壓溶解氣體運輸用油罐車. 識別和裝載牌 | (TANK WAGONS FOR THE CARRIAGE OF LIQUEFIED OR UNDER PRESSURE DISSOLVED GASES. IDENTITY AND LOADING PLATE.) |
| NF F37-022 | 鐵路車輛.“ 鹽酸“ 類罐車. 直徑為50mm和80mm的力排空圓頂蓋 | (RAILWAY TRANSPORT EQUIPMENT. TANK WAGONS HYDROCHLORIC ACID TYPE. DOME COVER FOR PRESSURE DISCHARGE (50 MM AND 80 MM DIAMETER).) |
| NF F37-0221 | 鐵路車輛.“鹽酸“類罐車.直徑為50mm和80mm壓力排空圓頂蓋 | () |
| NF F37-027 | 鐵路車輛.罐車. 堵塞凸緣 | (RAILWAY TRANSPORT EQUIPMENT. TANK WAGONS. DUMMY FLANGES.) |
| NF F37-031 | 鐵路車輛.罐車. 蒸汽加熱. 蒸汽進口 | (RAILWAY TRANSPORT EQUIPMENT. TANK WAGONS. STEAM HEATING SYSTEMS. STEAM INLET.) |
| NF F37-0331 | 鐵路車輛.罐車.特殊標記.標記的位置和銘牌 | () |
| NF F37-036 | 鐵路車輛.與大氣隔絕的產品用罐車.負壓板 | (Railway transport equipment. Tank wagons for goods insulated from the atmosphere. Depression plate.) |
| NF F37-037 | 鐵路車輛.液態工產品罐車. 吸液蓋 | (RAILWAY TRANSPORT EQUIPMENT. TANK WAGONS FOR CHEMICALS. DRAWING CUP.) |
| NF F37-040 | 鐵路車輛.底部技壓灌注排放的液化氣罐車.壓力小于40bar.計量.排氣和試驗用孔 | (RAILWAY TRANSPORT EQUIPMENT. TANK WAGONS FOR CARRYING LIQUIFIED GASES UNDER PRESSURE AND HAVING BOTTOM FILLING AND EMPTYING DEVICES. MAXIMUM SERVICE PRESSURE 40 BARS. AIR ORIFICE FOR GAUGING,DEGASSING AND TESTING.) |
| NF F37-042 | 石油和化工液態產品運輸用油罐車. 識別和裝載牌 | (TANK WAGONS FOR THE CARRIAGE OF LIQUID CHEMICAL AND OIL PRODUCT. IDENTITY AND LOADING PLATE.) |
| NF F37-044 | 鐵路運輸設備.設備檢修油罐車牌 | (RAILWAY TRANSPORT EQUIPMENT. TANK WAGONS PLATE FOR THE OVERHAUL OF EQUIPMENT UNITS.) |
| NF F37-060 | 鐵路運輸設備.液態化工產品運輸用罐車和貯液集裝箱.帶扣釘螺栓閉鎖裝置的圓頂蓋 | (RAILWAY TRANSPORT EQUIPMENT. TANK WAGONS AND TANK CONTAINERS FOR CARRYING LIQUID CHEMICAL PRODUCTS. DOME COVER WITH A TOGGLE-BOLT CLOSING DEVICE.) |
| NF F37-100-2 | 鐵路設施.油罐車.第2部分:包括回流蒸氣的液體產品用底卸式裝置 | (Railway applications - Tank wagons - Part 2 : bottom emptying devices for liquid products including vapour return.) |
| NF F37-100-3 | 鐵路設施.油罐車.第3部分:壓力下液化氣用底部裝卸式裝置 | (Railway applications - Tank wagons - Part 3 : bottom filling and emptying devices for gases liquefied under pressure.) |
| NF F37-100-4 | 鐵路設施.油罐車.第4部分:液態產品用頂部裝卸式裝置 | (Railway applications - Tank wagons - Part 4 : top devices for top emptying and filling of liquid products.) |
| NF F37-100-5 | 鐵路設施.油罐車.第5部分:液態產品用頂部裝填、底部卸料式裝置 | (Railway applications - Tank wagons - Part 5 : top devices for bottom emptying and top filling of liquid products.) |
| NF F37-100-6 | 鐵路設施.油罐車.第6部分:人孔 | (Railway applications - Tank wagons - Part 6 : manholes.) |
| NF F38-001 | 鐵路運輸設備.采用最大壓力為2.5bar排空的散裝粉狀產品運輸用氣動排空車.粉導管用統一接頭 | (RAILWAY TRANSPORT EQUIPMENT. WAGONS WITH PNEUMATIC DISCHARGE,FOR CARRYING POWDER GOODS IN BULK WITH DISCHARGE AT MAXIMUM OPERATING PRESSURE OF 2.5 BAR. STANDARD AIR PIPE CONNECTION.) |
| NF F38-002 | 鐵路運輸設備.采用最大壓力為2.5bar排空的散粉狀產品運輸用氣動排空車.散粉導管用統一接頭 | (RAILWAY TRANSPORT EQUIPMENT. WAGONS WITH PNEUMATIC DISCHARGE FOR CARRYING POWDER GOODS IN BULK. DISCHARGE AT MAXIMUM SERVICE PRESSURE OF 2.5 BARS.) |
| NF F38-002M | 鐵路運輸設備.采用最大壓力為2.5bar的散裝粉狀產品運輸用氣動排空車.排空粉導管用統一接頭 | () |
| NF F52-131 | 鐵路固定裝置.“有軌電車“道岔 | (RAILWAY FIXED EQUIPMENT. “TRAMWAY“ POINTS AND CROSSING.) |
| NF F52-163 | 鐵路固定設備.指示和行人穿越道的鎖定.帶有鉆石滑動開關的行人穿越道指示行車的鎖定 | (RAILWAY FIXED EQUIPMENT. LOCKING OF POINTS AND CROSSING. LOCKING DEPENDENT OF DRIVING OF POINTS CROSSING WITH SLIDING SWITCH DIAMOND.) |
| NF F56-353 | 鐵路固定設備.通訊和信號裝置架空線路用器材.停車和分軌用立式雙托架 | (FIXED RAILWAY INSTALLATIONS. EQUIPMENT FOR OVERHEAD ELECTRIC TELECOMMUNICATION AND SIGNALLING LINES. DOUBLE VERTICAL STOP AND SHUTOFF BRACKET.) |
| NF F57-001 | 鐵路固定設備.調車場.道岔的自動控制.用“射門“法自動控制剎車.作用原理.特性 | (RAILWAY FIXED EQUIPMENT. MARSHALLING YARD. AUTOMATIC POINTS AND RAIL BRAKE CONTROL. (PRECISION FIRING METHOD). OPERATING PRINCIPLES. CHARACTERISTICS.) |
| NF F57-015 | 鐵路固定設備.車輛調度編組場用的腳踏板:特性 | (RAILWAY FIXED EQUIPMENT. ELECTRONIC TREADLE FOR MARSHALLING YARD. CHARACTERISTICS.) |
| NF F58-001 | 鐵路固定設備.在軌道U.T.C.鐵路上運行的第3類車輛的行車規定 | (RAILWAY TRACK CONSTRUCTION AND MAINTENANCE PLANT. APPROVAL OF PLANT OF THIRD PARTY OWNERSHIP FOR RUNNING ON UIC GAUGE RAILWAY TRACK.) |
| NF F58-002 | 鐵路建造和整套維護設備.車輛在UIC鐵路上運行時的鐵路建造和整套維護設備的規定 | (RAILWAY TRACK CONSTRUCTION AND MAINTENANCE PLANT. APPROVAL OF RAILWAY TRACK CONSTRUCTION AND MAINTENANCE PLANT FOR OPERATION ON UIC GAUGE TRACKS.) |
| NF F58-051 | 道路工程設備.鐵路車輛上的個人升降機.安全的一般規則 | (RAILWAY TRACK CONSTRUCTION AND MAINTENANCE PLANT. PERSONNEL CARRYING HOISTS ON RAILWAY VEHICLES. GENERAL SAFETY RULES.) |
| NF F59-010 | 鐵路固定設備.火車時刻表和告示牌的表示.告示牌尺寸 | (FIXED RAILWAY INSTALLATIONS. PRESENTATION OF TIMETABLE AND ADVERTISING POSTERS. SIZE OF POSTERS.) |
| NF F59-011 | 鐵路車輛.火車時刻表和告示牌的表示.框 | (FIXED RAILWAY INSTALLATIONS. PRESENTATION OF TIMETABLE AND ADVERTISING POSTERS. FRAMES.) |
| NF F60-001 | 鐵路車輛.直流供電的電氣和電子設備.過電壓試驗 | (RAILWAY ROLLING STOCK. ELECTRICAL AND ELECTRONIC EQUIPMENTS SUPPLIED WITH DIRECT CURRENT. OVERVOLTAGE TESTS.) |
| NF F60-002 | 鐵路車輛.電氣和電子設備.正弦曲線振蕩試驗 | (Railway rolling stock. Electric and electronic devices. Sinusoidal vibrations tests.) |
| NF F60-100 | 鐵路設施.鐵路車輛.防電氣危險的保護裝置 | (Railway applications - Rolling stock - Protective provisions relating to electrical hazards.) |
| NF F60-101 | 鐵路車輛.絕緣調整.在空氣中的絕緣距離和儀器設備的漏電路 | (RAILWAY ROLLING STOCK. INSULATION CO-ORDINATION CLEARENCE AND CREEPAGE DISTANCES FOR APPARATUS AND FOR EQUIPMENT.) |
| NF F61-010 | 鐵路車輛.架線和裝置的機械固定的一般規則 | (RAILWAY ROLLING STOCK. GENERAL RULES FOR CABLING AND APPARATUS MECHANICAL FIXING.) |
| NF F61-011 | 鐵路車輛.電氣連接用銅螺旋旋入接頭.緊固扭矩G.紡織和皮革 | (Railway rolling stock. Screwed joint for electrical copper connections driving torque.) |
| NF F61-012 | 鐵路車輛.電感器和電纜的選擇標準 | (Railway rolling stock. Selection criteria for electrical conductors and cables.) |
| NF F61-013 | 鐵路車輛.電線和電纜的安裝和固定 | (RAILWAY ROLLING STOCK. INSTALLATION AND FIXING OF ELECTRICALS WIVES AND CABLES.) |
| NF F61-014 | 鐵路車輛.護套電纜和辮狀線的電氣連接 | (Railway rolling stock. Electrical connecting of braided wire and shielded cable.) |
| NF F61-016 | 鐵路車輛.連接和電儀表柱形絕緣子 | (Railway rolling stock. Connecting and electrical apparatus post insulators.) |
| NF F61-021 | 鐵路車輛.用于鋁制導電引線的螺紋接頭.上緊力矩 | (RAILWAY ROLLING STOCK. SCREWED JOINT FOR ELECTRICAL ALUMINIUM CONNCECTIONS DRIVING TORQUE.) |
| NF F61-030 | 鐵路車輛.電連接器.總則 | (RAILWAY ROLLING STOCK. ELECTRICAL CONNECTORS. GENERALITIES.) |
| NF F61-032 | 鐵路車輛.電連接器.加工裝置控制型 | (RAILWAY ROLLING STOCK. ELECTRICAL CONNECTORS. TYPE WITH FLOAT MOUNTING.) |
| NF F61-343 | 鐵路設施.機車車輛.電纜敷設的安裝規則 | (Railway applications - Rolling stock - Rules for installation of cabling.) |
| NF F61-349 | 鐵路車輛.導線和電纜用卡圈 | (RAILWAY ROLLING STOCK. CABLE CLAMP COLLARS FOR ELECTRIC CONDUCTORS AND CABLES.) |
| NF F62-000 | 鐵路車輛.電工器件和設備的一般規則 | (Railway rolling stock. General rules for electrotechnical components and equipments.) |
| NF F62-001-1 | 鐵路車輛.控制和輔助線路用最大電流熱磁電機微型電路斷電器.一般特性和試驗 | (RAILWAY ROLLING STOCK. MAGNETO-THERMIC MICROCIRCUIT-BREAKERS FOR MAXIMUM CURRENT FOR CONTROLS AND AUXILIARIES CIRCUITS. GENERALITIES AND TESTS.) |
| NF F62-001-2 | 鐵路車輛.控制和輔助線路用最大電流熱磁電機微型電路斷電器.尺寸 | (RAILWAY ROLLING STOCK. MAGNETO-THERMIC MICROCIRCUIT-BREAKERS FOR MAXIMUM CURRENT FOR CONTROLS AND AUXILIARIES CIRCUITS. DIMENSION.) |
| NF F62-001-3 | 鐵路車輛.控制和輔助線路用最大電流熱磁電機微型電路斷電器.特殊簧片總成 | (RAILWAY ROLLING STOCK. MAGNETO-THERMIC MICROCIRCUIT-BREAKERS FOR MAXIMUM CURRENT FOR CONTROLS AND AUXILIAIRIES CIRCUITS. COLLECTION OF PARTICULFAR LEAVES.) |
| NF F62-002-1 | 鐵路車輛.“有“或“無“接觸式繼電器和固定連接器.總則和試驗 | (RAILWAY ROLLING STOCK. ALL-OR-NOTHING CONTACT RELAY AND ITS FIXED CONNECTOR. GENERAL AND TESTING.) |
| NF F62-002-2 | 鐵路車輛.“有“或“無“接觸式繼電器和固定連接器.特殊離合連接 | (RAILWAY ROLLING STOCK. ALL-OR-NOTHING CONTACT RELAY AND ITS FIXED CONNECTOR . COLLECTION OF PARTICULAR LEAVES.) |
| NF F62-011-1 | 鐵路車輛.一般功能要求.晶體管鎮流器.一般性及試驗 | (RAILWAY ROLLING STOCK. FUNCTIONAL GENERAL REQUIREMENTS. TRANSISTORIZED BALLASTS. GENERALITIES AND TESTS.) |
| NF F62-011-2 | 鐵路車輛.一般功能要求.晶體管鎮流器.特殊葉片間的聯系 | (RAILWAY ROLLING STOCK. FUNCTIONAL GENERAL REQUIREMENTS. TRANSISTORIZED BALLASTS. COLLECTION OF PARTICULAR LEAVES.) |
| NF F62-102 | 鐵路固定設備和鐵路車輛.可控制的金屬結構電容器 | (RAILWAY FIXED EQUIPMENT AND ROLLING STOCK. CONTROLLABLE METALLIZED FRAME CAPACITORS.) |
| NF F62-201 | 鐵路車輛.客車電力供應的連接.互換性 | (Rolling stock. Coupling gear for electrical power supply to passenger stock. Interchangeability conditions.) |
| NF F62-311 | 鐵路設施.照明熒光燈用鐵路車輛直流供電電子鎮流器 | (Railway applications - Rolling stock D.C. supplied electronic ballasts for lighting fluorescent lamps.) |
| NF F62-601 | 鐵路車輛.電池充電器.控制完成目的能力的規則 | (RAILWAY ROLLING STOCK. BATTERY CHARGERS. RULES GOVERNING THE ABILITY TO FULFILL THEIR PURPOSE.) |
| NF F63-264-1 | 鐵路設施.有特殊防火性能的鐵路車輛電纜.標準壁厚.第1部分:一般要求 | (Railways applications - Railway rolling stock cables having special fire performance - Standard wall - Part 1 : general requirements.) |
| NF F63-264-2 | 鐵路設施.有特殊防火性能的鐵路車輛電纜.標準壁厚.第2部分:單芯電纜 | (Railways applications - Railway rolling stock cables having special fire performance - Standard wall - Part 2 : single core cables.) |
| NF F63-264-3 | 鐵路設施.有特殊防火性能的鐵路車輛電纜.標準壁厚.第3部分:多芯電纜 | (Railway applications - Railway rolling stock cables having special fire performance - Standard wall - Part 3 : multicore cables.) |
| NF F63-295 | 鐵路車輛.鐵路車輛電纜.具有防火性能的絕緣電纜和軟線 | (RAILWAY ROLLING STOCK. CABLES FOR ROLLING STOCK. INSULATED CABLES AND FLEXIBLE CORDS WITH RESPECT TO BEHAVIOUR IMPROVED TO FIRE.) |
| NF F63-296 | 鐵路車輛.耐粗柴油的絕緣電纜和軟線 | (RAILWAY ROLLING STOCK. INSULATED CABLES AND FLEXIBLES CORDS GAS OIL RESISTANT.) |
| NF F63-305 | 鐵路設施.有特殊燃燒性能的鐵路車輛電纜.試驗方法 | (Railway applications - Railway rolling stock cables having special fire performance - Test methods.) |
| NF F63-306-1 | 鐵路設施.有專門防火性能的鐵道車輛電纜.薄壁.第1部分:一般要求 | (Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 1 : general requirements.) |
| NF F63-306-2 | 鐵路設施.有專門防火性能的鐵道車輛電纜.薄壁.第2部分:單芯電纜 | (Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 2 : single core cables.) |
| NF F63-306-3 | 鐵路設施.有專門防火性能的鐵道車輛電纜.薄壁.第3部分:屏蔽的和用薄護套的單芯和多芯電纜(雙芯、三芯和四芯 | (Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 3 : single core and multicore cables (pairs, triples and quads) screened and thin wall sheathed.) |
| NF F63-306-4 | 鐵路設施.有專門防火性能的鐵道車輛電纜.薄壁.第4部分:有標準厚度護套的多芯和多對絞線的電纜 | (Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 4 : multicore and multipair cables standard wall sheathed.) |
| NF F63-307 | 鐵路車輛.電氣和電子設備鎧裝電纜用導線和電纜 | (ROLLING STOCK. CONDUCTORS AND CABLES USED FOR THE CABLING OF SHEATHED ELECTRIC AND ELECTRONIC EQUIPMENT.) |
| NF F63-436 | 鐵路車輛.電導體和電纜保護用軟護套 | (RAILWAY ROLLING STOCK. FLEXIBLE SHEATHS FOR THE PROTECTION OF ELECTRICAL CONDUCTORS AND CABLES.) |
| NF F63-808 | 鐵路車輛.無鹵電導線和薄絕緣、薄保護層電纜 | (Railway rolling stock. Halogen free, electrical conductors and cables with thin insulation and protective layers.) |
| NF F63-809 | 鐵路車輛.低鹵化電連接器和薄絕緣層及保護層電纜 | (RAILWAY ROLLING STOCK. LOW HALOGEN ELECTRICAL CONDUCTORS AND CABLES WITH THIN INSULATION AND PROTECTIVE LAYERS.) |
| NF F63-826 | 鐵路車輛.導體和無鹵化物電纜 | (RAILWAY ROLLING STOCK. HALOGEN FREE ELECTRICAL CONDUCTORS AND CABLES.) |
| NF F64-018 | 鐵路車輛.蓄電池.鎳鎘開路充電電池 | (Railway rolling stock. Electric accumulators. Vented nickel-cadmium secondary single cells.) |
| NF F64-328 | 鐵路車輛.鐵路機車.鉛酸蓄電池 | (RAILWAY ROLLING STOCK. LEAD ACID BATTERIES.) |
| NF F64-330 | 鐵路車輛.電子儲存裝置結構 | (RAILWAY ROLLING STOCK. ELECTRIC ACCUMULATOR FRAME.) |
| NF F65-101 | 鐵路車輛.輔助旋轉電機.技術布局 | (Railway rolling stock. Auxiliary rotating machines. Technologic dispositions.) |
| NF F65-200 | 鐵路車輛.牽引電機.設計規范 | (RAILWAY ROLLING STOCK. TRACTION MOTORS. DESIGN SPECIFICATIONS.) |
| NF F65-349-1 | 電氣牽引.鐵路和道路車輛用旋轉電機.第1部分:非電子交換回饋交變電流馬達機 | (Electrical traction - Rotating electrical machines for rail and road vehicules - Part 1 : machines other than electronic convertor-fed alternating current motors.) |
| NF F65-349-1/A1 | 電力牽引.鐵路與道路車輛用旋轉電機.第1部分:除電子變流器供電的交流電動機之外的旋轉電機 | (Electric traction - Rotating electrical machines for rail and road vehicles - Part 1 : machines other than electronic convertor-fed alternating current motors.) |
| NF F65-377 | 電力牽引.鐵路車輛.反向供電交流電動機及其控制的聯合檢驗 | (Electric traction - Rolling stock - Combined testing of inverter-fed alternating current motors and their control.) |
| NF F65-377-2 | 鐵路設施.機車車輛.聯合試驗.第2部分:斬波直流牽引電動機及其控制設備 | (Railway applications - Rolling stock - Combined testing - Part 2 : chopper-fed direct current traction motors and their control.) |
| NF F65-377-3 | 鐵路設施.機車車輛.第3部分:間接變流器供電的交流電動機及其他控制系統的組合檢驗 | (Railway applications - Rolling stock - Part 3 : combined testing of alternating current motors, fed by an indirect convertor, and their control system.) |
| NF F66-077-1 | 鐵路設施.車輛電氣設備.第1部分:一般應用條件和規則 | (Railway applications - Electric equipment for rolling stock - Part 1 : general service conditions and general rules.) |
| NF F66-077-2 | 鐵路設施.車輛電氣設備.第2部分:電工元件.一般規則 | (Railway applications - Electric equipment for rolling stock - Part 2 : electrotechnical components - General rules.) |
| NF F66-077-3 | 鐵路設施.車輛用電氣設備.第3部分:直流斷路器規則 | (Railway applications - Electric equipment for rolling stock - Part 3 : rules for DC circuit-breakers.) |
| NF F66-077-4 | 鐵路設施.機車車輛用電氣設備.第4部分:電工元件.交流斷路器規則 | (Railway applications - Electric equipment for rolling stock - Part 4 : electrotechnical components - Rules for AC circuit-breakers.) |
| NF F66-101 | 鐵路車輛.變壓器和浸沒牽引電感.技術規范 | (RAILWAY ROLLING STOCK. IMMERSED TRACTION TRANSFORMERS AND REACTORS. TECHNOLOGICAL PROVISIONS.) |
| NF F67-001-0 | 鐵路車輛.車上的電子和微處理機 .導言 | (Railway rolling stock. Inborne electronic and microprocessor equipment. Introduction.) |
| NF F67-001-1 | 鐵路車輛.車上的電子設備和微處理機.第1部分:環境設計和使用的一般條件 | (Railway rolling stock. Inborne electronic and microprocessor. Part 1 : general environnemental, design and user conditions.) |
| NF F67-001-2 | 鐵路機車.車上的電子設備和微處理機.第2部分:制造 | (Railway rolling stock. Inborne electronic and microprocessor equipment. Part 2 : construction (mounting, cabling, marking).) |
| NF F67-001-4 | 鐵路車輛.車上的電子設備和微處理機.第4部分:零件 | (Railway rolling stock. Electronic and microprocessor equipment. Part 4 : components.) |
| NF F67-001-5 | 鐵路車輛.電子和微處理機設備.第5部分:試驗 | (Railway rolling stock. Inborne electronic and microprocessor equipment. Part 5 : tests.) |
| NF F67-001-6 | 鐵路車輛.車載電子和微處理機設備.第6部分:可靠性、可維護性、有效性、可測試性 | (Railway rolling stock. Inborne electronic and microprocessor equipment. Part 6 : reliability. Maintenability. Availability. Testability.) |
| NF F67-010 | 鐵路車輛.電子設備術語.與合同及設備的組成部分有關的術語 | (Rolling stock. Terminology of electronic equipment for rolling stock. Terms related to contracts and mechanical constitution of equipments.) |
| NF F67-155 | 鐵路設施.軌道車輛上的電子裝置 | (Railway appliances - Electronic equipment used on rolling stock.) |
| NF F67-155/A1 | 鐵路設施.機車車輛用電子設備 | (Railway applications - Electronic equipment used on rolling stock.) |
| NF F69-010 | 鐵路車輛.數據處理.定向串行異步傳輸程序形式“定向” | (RAILWAY ROLLING STOCK. DATA PROCESSING. DIRECTIONNAL SERIAL ASYNCHONUS TRANSMISSION PROCEDURE TYPE “PONT TO POINT“.) |
| NF F70-010 | 鐵路固定設備和車輛.鐵路安全電子設備.安全裝置的展示程序 | (RAILWAY FIXED EQUIPMENT AND ROLLING STOCK. RAILWAY SAFETY ELECTRONIC EQUIPMENT. PROCEDURE FOR DEMONSTRATION OF SAFETY UNIT.) |
| NF F71-004 | 鐵路車輛和固定設備.數據處理.微處理設備和有關文件的方法論研究 | (RAILWAY FIXED EQUIPMENT AND ROLLING STOCK. DATA PROCESSING. DATA MICROPROCESSING EQUIPMENTS DEVELOPMENT METHOD AND ASSOCIATED DOCUMENTATION.) |
| NF F71-011 | 鐵路車輛和固定設備.信息.軟件的安全性.概論 | (RAILWAY FIXED EQUIPMENT AND ROLLING STOCK. DATA PROCESSING. SOFTWARE DEPENDABILITY. GENERALITIES.) |
| NF F71-012 | 鐵路車輛和固定設備.信息.軟件的安全.軟件的作用 | (RAILWAY FIXED EQUIPMENT AND ROLLING STOCK. DATA PROCESSING. SOFTWARE DEPENDABILITY,STRESSES ON SOFTWARE.) |
| NF F71-013 | 鐵路車輛和固定設備.信息.軟件的安全性.用于軟件安全分析的方法 | (RAILWAY FIXED EQUIPMENT AND ROLLING STOCK. DATA PROCESSING. SOFTWARE DEPENDABILITY. ADAPTED METHODS FOR SOFTWARES SAFETY ANALYSIS.) |
| NF F73-011 | 鐵路固定設備和鐵路車輛.帶L制式無線電地面/流動發射出的電視設備 | (FIXED EQUIPMENT AND ROLLING STOCK OF RAILWAYS. EQUIPMENT OF TELEVISION WITH TRANSMISSION RADIO GROUND/MOBILE.) |
| NF F74-001-1 | 鐵路固定設備和車輛.電子和微處理器信號和輔助駕駛設備.第1部分:一般的環境,設計和使用要求 | (RAILWAY FIXED EQUIPMENT AND ROLLING STOCK. ELECTRONIC AND MICROPROCESSOR SIGNALLING AND DRIVER-AID EQUIPMENT. PART 1 : GENERAL ENVIRONMENTAL, DESIGN AND USER CONDITIONS.) |
| NF F74-001-2 | 鐵路固定設備和車輛.電子和微處理器信號和輔助駕駛設備.第2部分:結構(安裝,電纜和標志) | (RAILWAY FIXED EQUIPMENT AND ROLLING STOCK. ELECTRONIC AND MICROPROCESSOR SIGNALLING AND AID EQUIPMENT. PART 2 : CONSTRUCTION (MOUNTING, CABLING, MARKING).) |
| NF F74-101-0 | 鐵路固定設備和車輛.安全鋪設電纜和連接.第0部分:通則 | (RAILWAY FIXED EQUIPMENTS AND ROLLING STOCK. SAFETY CABLE WORK AND CONNECTION. PART 0 : GENERAL.) |
| NF F74-101-1 | 鐵路固定設備和車輛.安全鋪設電纜和連接.第1部分:安全標準 | (RAILWAY FIXED EQUIPMENT AND ROLLING STOCK. SAFETY CABLEWORK AND CONNECTION. PART 1 : SAFE CRITERION.) |
| NF F74-101-2 | 鐵路固定設備和車輛.安全鋪設電纜和連接.第2部分:技術和技術選擇.環境標準.導則 | (RAILWAY FIXED EQUIPMENT AND ROLLING STOCK. SAFETY CABLEWORK AND CONNECTION. PART 2 : TECHNIQUE AND TECHNOLOGY CHOICES. ENVIRONMENT CRITERION. GUIDE.) |
| NF F74-101-3 | 鐵路固定設備和車輛.安全鋪設電纜和連接.第3部分:工廠制作.工廠和現場質量監測.位置固定.可維修性標準.導則 | (RAILWAY FIXED EQUIPMENT AND ROLLING STOCK. SAFETY CABLEWORK AND CONNECTION. PART 3 : MAKING IN FACTORY - QUALITY SUPERVISING IN FACTORY AND ON PLACE. SETTING UP IN POSITION. MAINTENABILITY CRITERION. GUIDE.) |
| NF F74-101-4 | 鐵路固定設備和車輛.安全鋪設電纜和連接.第4部分:機械標準 | (RAILWAY FIXED EQUIPMENTS AND ROLLING STOCK. SAFETY CABLEWORK AND CONNECTION. PART 4 : MECHANICAL CRITERION.) |
| NF F74-101-5 | 鐵路固定設備和車輛.安全鋪設電纜和連接.第5部分:電氣標準 | (RAILWAY FIXED EQUIPMENT AND ROLLING STOCK. SAFETY CABLEWORK AND CONNECTION. PART 5 : ELECTRICAL CRITERION.) |
| NF F78-001 | 鐵路運輸器材.F ７８運營專用工具索具.桶和客車用楔 | (RAILWAY TRANSPORT EQUIPMENT. GENERAL TACKLE. CHOCKS FOR BARRELS AND VEHICLES.) |
| NF F80-101 | 鐵路車輛.F ８０鋼鐵產品和半成品制造鐵路車輛推薦使用的鋼材.I·一般規定 | (ROLLING STOCK. RECOMMENDED STEELS FOR ROLLING STOCK CONSTRUCTION. I. COMMON REQUIREMENTS.) |
| NF F80-102 | 鐵路車輛.制造鐵路車輛推薦使用的鋼材.II.一般用結構鋼 | (ROLLING STOCK. RECOMMENDED STEELS FOR ROLLING STOCK CONSTRUCTION. II. STRUCTURAL STEELS FOR GENERAL PURPOSES.) |
| NF F80-103 | 鐵路車輛.鐵路車輛制造推薦使用的鋼材.Ⅲ.抗大氣腐蝕的結構鋼材 | (ROLLING STOCK. RECOMMENDED STEELS FOR ROLLING STOCK CONSTRUCTION. III. STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE. COPPER STEELS.) |
| NF F80-104 | 鐵路運輸設備.制造鐵路車輛推薦使用的鋼材.IV. 制造高張力機具和壓縮氣貯器的碳鋼和錳碳鋼 | (RAILWAY TRANSPORT EQUIPMENT. RECOMMENDED STEELS FOR RAILWAY ROLLING-STOCK CONSTRUCTION. IV : STEELS FOR PLATES FOR PRESSURE VESSELS AND HIGHLY STRESSED PARTS.) |
| NF F80-105 | 鐵路運輸設備.制造鐵路車輛推薦使用的鋼材.V.適于熱處理的鍛制非合金鋼 | (Railway transport equipment. Recommended steels for railway rolling-stock construction. V : unalloyed forging steels suitable for heat treatment.) |
| NF F80-106 | 鐵路車輛.制造鐵路車輛推薦使用的鋼材.VI. 冷加工鋼材 | (Rolling stock. Recommended steels for rolling stock construction. VI cold forming steels.) |
| NF F80-107 | 鐵路車輛.制造鐵路車輛推薦使用的鋼材.VII.熱處理非合金鋼和特種合金鋼 | (Rolling stock. Recommended steels for stock construction. VII unalloyed and alloy heat treated steels.) |
| NF F80-108 | 鐵路運輸設備.制造鐵路車輛推薦使用的鋼材.VIII. 彈簧鋼 | (RAILWAY TRANSPORT EQUIPMENT. RECOMMENDED STEELS FOR RAILWAY ROLLING-STOCK CONSTRUCTION. VIII : SPRING STEELS.) |
| NF F80-109 | 鐵路車輛.制造鐵路車輛推薦使用的鋼材.IY. 一般不銹鋼 | (Rolling stock. Recommanded steels for rolling stock construction. IX stainless steels for general purposes.) |
| NF F80-200 | 鐵路車輛.車輛流體管路用金屬管.材料和尺寸.選擇 | (ROLLING STOCK. TUBES FOR FLUID PIPES. MATERIALS AND SIZES. SELECTION.) |
| NF F82-001 | 鐵路車輛.車體框架用的可焊接鋁合金線材 | (RAILWAY ROLLING STOCK. EXTRUDED WELDABLE PRODUCTS IN ALUMINIUM ALLOY FOR BODYWORK.) |
| NF F85-011 | 鐵路固定設備.車站的設備.電子式行李寄存柜 | (FIXED RAILWAY EQUIPMENT. STATION EQUIMENT. ELECTRONIC LEFT LUGGAGE LOCKERS.) |
| NF G36-034-2 | 道路車輛上的負載限制組件.安全性.第2部分:由人造纖維生產的織網繩 | (Load restraint assemblies on road vehicles - Safety - Part 2 : web lashing made from man-made fibres.) |
| NF G36-034-3 | 道路車輛上的裝載物固定裝置.安全.第3部分:捆綁鏈 | (Load restraint assemblies on road vehicles - Safety - Part 3 : lashing chains.) |
| NF H00-013 | 包裝.總則.地面運輸車輛中新鮮水果和蔬菜平行六面體包裝的排列方法 | (PACKAGING. GENERAL. ARRANGEMENT OF PARALLELEPIPEDIC PACKAGES OF FRESH FRUITS AND VEGETABLES IN LAND TRANSPORT VEHICLES.) |
| NF H31-366 | 金屬包裝.卡車用可套裝的、嵌接截錐形桶 | (METAL PACKAGING. TRUNCATED PAILS. NESTING AND STACKING TYPE CALLED “CAMIONS“) |
| NF H50-510-1 | 藍式手推車.第1部分:有或無帶孩子功能的藍式手推車的要求和試驗 | (Basket trolleys. Part 1 : requirements and tests for basket trolleys with or without a child carrying facility.) |
| NF H90-202 | C組可換用的車箱.尺寸和一般要求 | (Swap bodies. Swap bodies of class C. Dimension and general requirements.) |
| NF H90-210 | 道路車輛上貨物的安全性.貨物運輸用商業車輛的無極繩掛點.最低要求和試驗 | (Securing of cargo on road vehicles - Lashing points on commercial vehicles for goods transportation - Minimum requirements and testing.) |
| NF H90-212 | 道路車輛上貨物的安全.商用車輛的車體結構.最低要求 | (Securing of cargo on road vehicles - Body structure of commercial vehicles - Minimum requirements.) |
| NF H96-002 | 自動裝卸車.詞匯 | (INDUSTRIAL TRUCKS. VOCABULARY OF POWERED TRUCKS.) |
| NF H96-003 | 裝卸車.操作平臺.術語 | (INDUSTRIAL TRUCKS-SAFETY ASPECTS.CONCERNING OPERATING AREAS.) |
| NF H96-004 | 搬運拖車.術語 | (INDUSTRIAL TRAILERS-TERMINOLOGY.) |
| NF H96-101 | 裝卸車.帶臂升降車和工作臺的尺寸 | (INDUSTRIAL TRUCKS HAND-OPERATED ELEVATING TRUCKS AND STILLAGES PRINCIPAL DIMENSIONS.) |
| NF H96-301-2 | 自動裝卸車.建造一般規則及踏板形狀 | (SELF-PROPELLED INDUSTRIAL TRUCKS SIT-DOWN RIDER-CONTROLLED. RULES FOR THE CONSTRUCTION AND LAYOUT OF PEDALS. (EUROPEAN STANDARD EN 281).) |
| NF H96-302 | 工業卡車的安全.達到和包括10000千克容量的自推動式卡車和帶有一達到和包括20000N的拖斗的工業拖車.第十部 | (SAFETY OF INDUSTRIAL TRUCKS. SELF-PROPELLED TRUCKS UP TO AND INCLUDING 10000 KG CAPACITY AND INDUSTRIAL TRACTORS WITH A DRAWBAR PULL UP TO AND INCLUDING 20000 N. PART 1 : GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN 1726-1).) |
| NF H96-303 | 工業貨車的安全.容量不大于10000Kg的自行式貨車和拖桿拉力不大于20000N的牽引車.第2部分:帶有高架操作者位 | () |
| NF H96-310 | 工業用貨車.國家安全規定、規程和標準的清單 | (INDUSTRIAL TRUCKS - LIST OF NATIONAL SAFETY REGULATIONS, CODES AND STANDARDS) |
| NF H96-311 | 工業卡車的安全.測量噪音散發的試驗方法 | (Safety of industrial trucks - Test methods for measuring noise emissions.) |
| NF H96-313 | 工業載重汽車的安全.測量振動用試驗方法 | (Safety of industrial trucks - Test methods for measuring vibration.) |
| NF H96-315 | 工業卡車.電磁兼容性 | (Industrial trucks - Electromagnetic compatibility.) |
| NF H96-330-1 | 自動裝卸車安全.電氣要求.第1部分:電池驅動卡車的一般要求 | (SAFETY OF INDUSTRIAL TRUCKS. ELECTRICAL REQUIREMENTS. PART 1 : GENERAL REQUIREMENTS FOR BATTERY POWERED TRUCKS. (EUROPEAN STANDARD EN 1175-1).) |
| NF H96-330-2 | 自動裝卸車安全.電氣要求.第2部分:內燃機驅動的卡車的一般要求 | (SAFETY OF INDUSTRIAL TRUCKS. ELECTRICAL REQUIREMENTS. PART 2 : GENERAL REQUIREMENTS OF INTERNAL COMBUSTION ENGINE POWERED TRUCKS. (EUROPEAN STANDARD EN 1175-2).) |
| NF H96-330-3 | 自動裝卸車安全.電氣要求.第3部分:內燃機驅動的卡車的電動傳輸系統特殊要求 | (SAFETY OF INDUSTRIAL TRUCKS. ELECTRICAL REQUIREMENTS. PART 3 : SPECIFIC REQUIREMENTS FOR THE ELECTRIC POWER TRANSMISSION SYSTEMS OF INTERNAL COMBUSTION ENGINE POWERED TRUCKS. (EUROPEAN STANDARD EN 1175-3).) |
| NF H96-332 | 工業卡車的安全.卡車上自動化功能件的補充要求 | (SAFETY OF INDUSTRIAL TRUCKS. ADDITIONAL REQUIREMENTS FOR AUTOMATED FUNCTIONS ON TRUCKS. (EUROPEAN STANDARD EN 1526).) |
| NF H96-333 | 工業卡車的安全.10000KG以上的自推式卡車 | (Safety of industrial trucks - Self propelled trucks over 10 000 kg capacity.) |
| NF H96-334 | 工業卡車的安全.潛在爆炸環境中的操作.用于可燃?xì)怏w,蒸汽潮氣和灰塵 | (Safety of Industrial trucks - Operation in potentially explosive atmospheres - Use in flammable gas, vapour, mist and dust.) |
| NF H96-335-1 | 工業貨車安全.腳踏貨車.第1部分:叉車 | (Safety of industrial trucks - Pedestrian propelled trucks - Part 1 : stacker trucks.) |
| NF H96-335-2 | 工業貨車安全.腳踏貨車.第2部分:托盤貨車 | (Safety of industrial trucks - Pedestrian propelled trucks - Part 2 : pallet trucks.) |
| NF H96-335-3 | 工業貨車的安全.可以在側面步行操縱的手推車和半手動運貨車.第3部分:平板式載重車 | (Safety of industrial trucks - Pedestrian controlled manual and semi-manual trucks - Part 3 : platform trucks.) |
| NF H96-335-4 | 工業貨車安全.腳踏貨車.剪式自動裝卸碼垛貨車 | (Safety of industrial trucks - Pedestrian propelled trucks - Part 4 : scissor lift pallet-trucks.) |
| NF H96-403 | 叉式起重車.鉤接式叉臂.詞匯 | (Fork-lift trucks. Hook-on type fork arms. Vocabulary.) |
| NF H96-404 | 裝卸車.叉車.榫接式實心叉臂.尺寸 | (FORK LIFT TRUCKS. HOOK-ON TYPE FORK ARMS. DIMENSIONS.) |
| NF H96-406 | 叉車.鉤接式叉臂和叉臂托架.安裝尺寸 | (Fork-lift trucks. Hook-on type fork arms and fork arm carriages. Mounting dimensions.) |
| NF H96-407 | 工業運載汽車.叉式起重機設備叉桿的修理和檢驗 | (Industrial trucks. Inspection and repair of fork arms in service on fork-lift trucks.) |
| NF H96-601 | 小腳輪和車輪.詞匯.推薦符號和多語詞典.(歐洲標準EN 12526) | (Castors and wheels. Vocabulary, recommended symbols and multilingual dictionary.) |
| NF H96-606 | 工業用貨車滾動面.分類 | (ROLLING SURFACES FOR INDUSTRIAL TRUCKS. CLASSIFICATION.) |
| NF H96-610 | 小腳輪和車輪.試驗方法和裝置(歐洲標準EN 12527) | (Castors and wheels. Test methods and apparatus.) |
| NF H96-611 | 小腳輪和車輪.家具用小角輪.要求.(歐洲標準EN 12528) | (Castors and wheels. Castors for furniture. Requirements.) |
| NF H96-612 | 小腳輪和車輪.家具用小角輪.轉椅用小角輪.要求.(歐洲標準EN 12529) | (Castors and wheels. Castors for furniture. Castors for swivel chairs. Requirements.) |
| NF H96-613 | 小腳輪和車輪.手工推動裝置的小腳輪和輪子.(歐洲標準EN 12530) | (Castors and wheels. Castors and wheels for manually propelled institutional applications.) |
| NF H96-614 | 小腳輪和車輪.醫院用輪床(歐洲標準EN 12531) | (Castors and wheels. Hospital bed castors.) |
| NF H96-615 | 小腳輪和車輪.1,1M/S(4KM/H)裝置的輪和小角輪(歐洲標準EN 12532) | (Castors and wheels. Castors and wheels for applications up to 1,1 m/s (4 km/h).) |
| NF H96-616 | 小腳輪和車輪.大于1,1M/S(4KM/H)達到4,4M/S(16KM/H)裝置的輪和小角輪(歐洲標準EN 12533) | (Castors and wheels. Castors and wheels for applications over 1 ,1 m/s (4 km/h) and up to 4,4 m/s (16 km/h).) |
| NF J31-156 | 船舶和海運技術.可通過內燃機車輛的貨艙艙位之間的通風量.所需總氣流流量的理論計算 | (Ships and marine technology - Ventilation of cargo spaces where vehicles with internal combustion engines are driven - Calculation of theoretical total airflow required.) |
| NF J39-010 | 車輛渡輪.空載和重載車輛的裝運.一般規范 | (Ro/ro ships. Stowage of laden commercial vehicles. General requirements.) |
| NF J39-020 | 造船工業.車輛渡輪和陸地的連接.有平滑滑道的船頭、船尾的渡船與碼頭間的連接裝置 | (Shipbuilding. Roll on/roll off ship-to-shore connection. Interface between terminals and ships with straight stern/bow ramps.) |
| NF J52-216 | 造船.拖網絞車 | (Shipbuilding. Trawl winches.) |
| NF J95-046-4 | 小艇.船體結構和建材尺寸.第4部分:車間和制造 | (Small craft - Hull construction and scantlings - Part 4 : workshop and manufacturing.) |
| NF L91-002-2 | 航空器地面保障設備.特殊要求.第2部分:膳食供應車 | (Aircraft ground support equipment - Specific requirements - Part 2 : catering vehicles.) |
| NF M15-015 | 汽車燃料.非含鉛汽油.要求和試驗方法(歐洲標準EN 228) | (AUTOMOTIVE FUELS. UNLEADEDPETROL. REQUIREMENTS AND TEST METHODS. (EUROPEAN STANDARD EN 228).) |
| NF M15-021 | 燃料.機動車用柴油.水-柴油乳膠液(WDE)特性 | (Fuels - Automotive fuels-Diesels - Characteristics of water-in-diesel fuel emulsions (WDE).) |
| NF M15-024 | 汽車燃料.柴油.要求和試驗方法(歐洲標準EN 590) | (AUTOMOTIVE FUELS. DIESEL. REQUIREMENTS AND TEST METHODS. (EUROPEAN STANDARD EN 590).) |
| NF M40-005 | 機動車燃料.液化石油氣.要求和試驗方法 | (Automotive fuels - LPG - Requirements and test methods.) |
| NF M60-003 | 壓縮天然氣車輛操作 | (Compressed natural gas vehicle operations.) |
| NF M88-070 | 道路油罐車.接地鉗 | (ROAD TANKERS. EARTHING CLIP.) |
| NF M88-071 | 道路油罐車.接地端子 | (ROAD TANKERS. EARTHING TERMINALS.) |
| NF M88-072 | 運輸和裝卸.未冷凍壓力溶解液化氣道路罐車.下部裝卸裝置 | (Transport and materials handling. Road tankers for non-refrigerated liquefied and dissolved gas under pressure. Floor filling and draining devices.) |
| NF M88-076 | 道路罐車.液態氯和二氧化硫道路油罐.最大壓強為14.5bar從上部裝卸的裝置 | (ROAD TANKERS. ROAD TANKERS CONTAINING LIQUEFIED CHLORINE AND SULPHUR DIOXYDE. DEVICES FOR FILLING AND EMPTYING AT THE TOP,FOR A MAXIMUM SERVICE PRESSURE OF 14.5 BAR.) |
| NF M88-080 | 道路油罐車.液態化學產品金屬油罐.壓力排放裝置:管狀柱塞,進氣孔 | (ROAD TANKER VEHICLES. METALLIC TANKERS FOR LIQUID CHEMICAL PRODUCTS. DEVICES EFFECTING DISCHARGE BY MEANS OF PRESSURE : PLUNGER TUBE,AIR OFF-TAKE.) |
| NF M88-081 | 道路油罐車.液態化學產品金屬油罐.排放裝置.快速接頭 | (ROAD TANKERS. METAL TANKERS FOR LIQUID CHEMICAL PRODUCTS. DISCHARGE DEVICES : QUICK-ACTION COUPLINGS.) |
| NF M88-101 | 罐式車箱.液態石油產品的運輸.設備的位置和配置 | (TANK WAGONS. TRANSPORT OF LIQUID HYDROCARBONS. LOCATION AND LAYOUT OF EQUIPMENT.) |
| NF M88-114 | 罐車.液化氣運輸.4-40ba工作壓力的DN50.DN80和DN100的止流和安全內部閥門 | (ROAD TANKERS. TRANSPORTATION OF LIQUEFIED GASES. INTERNAL STOP AND SAFETY OBTURATOR. NOMINAL DIAMETERS DN 50,DN 80 AND DN 100 FOR SERVICE PRESSURE BETWEEN 4 BAR AND 40 BAR.) |
| NF M88-127 | 危險物品運輸用槽罐車.槽罐車用輔助設備.無壓平衡底閥 | (Tanks for transport of dangerous goods - Service equipment for tanks - Non pressure balanced footvalve.) |
| NF M88-128 | 危險物品運輸用槽罐車.槽罐車的輔助設備.裝填孔的封蓋 | (Tanks for transport of dangerous goods - Service equipment for tanks - Fill hole cover.) |
| NF M88-131 | 危險物品運輸用槽罐車.槽罐車用輔助設備.壓力平衡底閥 | (Tanks for transport of dangerous goods - Service equipment for tanks - Pressure balanced footvalve.) |
| NF M88-132 | 危險物品運輸用槽罐車.槽罐車的輔助設備.人孔封蓋組件 | (Tanks for transport of dangerous goods - Service equipment for tanks - Manhole cover assembly.) |
| NF M88-141 | 危險物品運輸用槽罐車.槽罐車用輔助設備.液體燃料用防溢流裝置 | (Tanks for transport of dangerous goods - Service equipment for tanks - Overfill prevention systems for liquid fuels.) |
| NF M88-250 | 石油工業.油罐車和可動油罐容量鑒定牌 | (Petroleum industry. Calibration identification plate for tankers and removable tank cradles.) |
| NF M88-261 | 石油產品的運輸和裝卸.丙烷丁烷道路罐車散裝注入的固定裝置 | (TRANSPORT AND HANDLING OF PETROLEUM PRODUCTS - FIXED POSITIONS FOR TOP LOADING IN BULK OF ROAD TANKERS WITH BUTANE AND PROPANE.) |
| NF M88-262 | 道路罐車.油罐車.油船.非冷凍液態烴的運輸.橡膠軟管 | (ROAD TANKERS. TANK WAGONS. TANKERS. TRANSFER OF NON-REFRIGERATED LIQUEFIED HYDROCARBONS. RUBBER HOSE PIPES.) |
| NF M88-302 | 增強塑料制公路油罐車.設計用符號 | (ROAD TANKERS IN REINFORCED PLASTIC. SYMBOLS USED FOR DESIGN.) |
| NF M88-310 | 增強塑料制公路油罐車.技術數據單式樣 | (ROAD TANKERS OF REINFORCED PLASTIC MATERIALS. MODELS FOR TECHNICAL DATA SHEETS.) |
| NF M88-715 | 液化石油氣(LPG)槽罐車的裝備 | (Equipping of Liquefied Petroleum Gas (LPG) road tankers.) |
| NF M88-716 | 液化石油氣(LPG)用焊接鋼罐.槽罐車.設計和生產 | (Welded steel tanks for liquefied petroleum gas (LPG) - Road tankers - Design and manufacture.) |
| NF M88-718 | 汽車用液化石油汽的化學成分.容器 | (Automotive LPG components - Containers.) |
| NF M88-719 | 汽車用液化石油氣部件.容器除外 | (Automotive liquefied petroleum gas components - Other than containers.) |
| NF M88-732 | 液化石油氣槽罐車的灌裝和卸料程序 | (Filling and discharge procedures for LPG road tankers.) |
| NF M88-735 | 汽車用液化石油氣系統用戶使用說明書內容的最低要求 | (Minimum requirements for the content of the user manual for automotive LPG systems.) |
| NF P07-002 | 特定尺寸.卡車和火車車廂裝卸月臺高度 | (SPECIAL DIMENSIONS. HEIGHT OF LOADING PLATFORMS FOR LORRIES AND WAGONS.) |
| NF P16-340 | 車輛和行人區的排水通道.分類、設計、試驗要求、標記和合格評定 | (Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity.) |
| NF P22-615 | 橋式活動吊車轉動梁.工作變形和公差 | (METAL CONSTRUCTION. ROLLING BEAMS FOR OVERHEAD CRANES. DEFORMATIONS IN OPERATION AND TOLERANCES.) |
| NF P25-302 | 工業,商業和車庫門.對風負載的抗性.分級 | (Industrial, commercial and garage doors and gates - Resistance to wind load - Classification.) |
| NF P25-303 | 工業,商業和車庫門.對水滲透的抗性.分級 | (Industrial, commercial and garage doors and gates - Resistance to water penetration - Classification.) |
| NF P25-304 | 工業,商業和車庫門.空氣滲透性.分級 | (Industrial, commercial and garage doors and gates - Air permeability - Classification.) |
| NF P25-305 | 工業,商業和車庫門.空氣滲透性.試驗方法 | (Industrial, commercial and garage doors and gates - Air permeability - Test method.) |
| NF P25-306 | 工業,商業和車庫門.熱傳輸性.計算要求 | (Industrial, commercial and garage doors and gates - Thermal transmittance - Requirements for the calculation.) |
| NF P25-307 | 工業、商業和車庫用門.術語.第1部分:門的類型 | (Industrial, commercial and garage doors and gates - Terminology - Part 1 : types of doors.) |
| NF P25-308 | 工業、商業和車庫用門.術語.第2部分:門的部件 | (Industrial, commercial and garage doors and gates - Terminology - Part 2 : parts of doors.) |
| NF P25-309 | 工業、商業和車庫用門和大門.防風.試驗和計算 | (Industrial, commercial and garage doors and gates - Resistance to wind load - Testing and calculation.) |
| NF P25-310 | 工業、商業和車庫用門和大門.動力門的使用安全.要求 | (Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Requirements.) |
| NF P25-311 | 工業,商業和車庫門.使用動力操作門時的安全性.試驗方法 | (Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Test methods.) |
| NF P25-312 | 工業,商業和車庫門.對滲水性的耐性.試驗方法 | (Industrial, commercial and garage doors and gates - Resistance to water penetration - Test method.) |
| NF P25-314 | 工業,商業和車庫門.機械方面.要求 | (Industrial, commercial and garage doors and gates - Mechanical aspects - Requirements.) |
| NF P25-315 | 工業,商業和車庫門.機械方面.試驗方法 | (Industrial, commercial and garage doors and gates - Mechanical aspects - Test methods.) |
| NF P25-318 | 工業、商業和車庫門的安裝和使用 | (Industrial, commercial and garage doors and gates - Installation and use.) |
| NF P25-319 | 工業、商業和車庫用門.電動門的安全裝置.要求和試驗方法 | (Industrial, commercial and garage doors and gates - Safety devices for power operated doors and gates - Requirements and test methods.) |
| NF P91-100 | 公共停車場.功能標準.設計及尺寸 | (PUBLIC CAR-PARKS. CRITERIA FOR FUNCTIONAL CAPABILITY. DESIGN AND DIMENSIONS.) |
| NF P91-120 | 建筑尺寸.私人停車場.停車區及車道的最低尺寸 | (DIMENSIONS OF THE CONSTRUCTIONS. PRIVATE CAR PARKS. MINIMUM DIMENSIONS OF THE PARKING LOTS AND LANES.) |
| NF P98-132 | 瀝青路面.行車路面層和底層.薄層瀝青混凝土.定義.分類.特性.生產.鋪設 | (Asphalt - Wearing course and base courses : thin layer asphalt concrete - Definition - Classification - Characteristics - Manufacturing- Laying.) |
| NF P98-134 | 瀝青混合料.行車路面層:多孔瀝青.定義.分類.特性.生產.鋪設 | (Bituminous mixes - Wearing courses : porous asphalts - Definition - Classification - Characteristics - Manufacturing - Laying.) |
| NF P98-145 | 瀝青路面.人行便道用和公路車行道的瀝青膏.定義.分類.特性,生產.使用 | (BITUMINOUS MIXES. MASTIC ASPHALTS FOR FOOTWAYS AND PAVEMENT WEARING COURSES. DEFINITIONS. CLASSIFICATION. CHARACTERISTICS. FABRICATION. LAYING.) |
| NF P98-200-1 | 路面試驗.行車荷載面形成的彎曲測定.第1部分:定義、測量方法、特性評估 | (ROAD TESTING. MEASUREMENT OF A ROLLING LOAD DEFLECTION. PART 1 : DEFINITIONS,MEASUREMENTS,SPECIFIC VALUES.) |
| NF P98-200-5 | 路面試驗.行車荷載偏轉的測定.第5部分:使用偏轉圖04對偏轉值的測定 | (ROAD TESTING. MEASUREMENT OF A ROLLING LOAD DEFLECTION. PART 5 : DETERMINATION OF DEFLECTION VALUES USING DEFLECTOGRAPH 04.) |
| NF P98-311 | 機動車輛和行人通過區域的水溝頂部和人孔頂部的設計要求.試驗類型、標志和質量控制 | (Gully tops and manhole tops for vehicular and pedestrian areas. Design requirements, type testing, marking, quality control.) |
| NF P98-791 | 道路維護設備和產品.適用于灑鹽機和掃雪車的液壓驅動裝置.特性和規范 | (Road maintenance equipment and products - Hydraulic drive device adapted into salt speader and snow clearing blade carrying vehicles - Characteristics and specifications.) |
| NF P99-305 | 道路交通數據.詳盡描述、存儲和傳播.可變感應電磁環路車輛探測裝置和探測器.定義、特征和性能 | (Road traffic data - Elaboration, storage, spreading - Variable inductance electromagnetic loop vehicle detection units and detectors - Definitions, characteristics and performances.) |
| NF P99-400 | 車上設備.駕駛員控制板.最小尺寸和功能規范 | (BUS AND COASCH ON-BOARD EQUIPMENT. DRIVER`S CONTROL CONSOLE. MINIMUM DIMENSIONAL AND FUNCTIONAL CHARACTERISTICS.) |
| NF P99-450 | 停車時間控制儀.記時打印機:功能及技術特性 | (PARK TIME MONITORING APPARATUS. TIME STAMPS : FUNCTIONAL AND TECHNICAL CHARACTERISTICS.) |
| NF P99-460 | 車輛停泊控制設備.付款和售票機.技術和功能要求 | (Vehicle parking control equipment - Pay and display ticket machine - Technical and functional requirements.) |
| NF R05-010 | 道路車輛.車輛牌號(VIN).內部構造 | (Road vehicles. Vehicles identification number (vin). Content and structure.) |
| NF R05-011 | 道路車輛.制造商(WMI)識別碼 | (Road vehicles. World manufacturer identifier (wmi) code.) |
| NF R05-012 | 道路車輛.車輛牌號(VIN).定位和固定 | (Road vehicles. Vehicles identiication number (vin). Location and attachment.) |
| NF R10-003 | 道路車輛.運輸汽車的軸荷重分布 | (Road vehicles. Distribution of loads on the axles of commercial vehicles. Method of calculation.) |
| NF R10-005 | 道路車輛.重量.詞匯和代碼 | (Road vehicles. Masses. Vocabulary and codes.) |
| NF R10-007 | 道路車輛.車輛動態和抓地能力.詞匯 | (Road vehicles. Vehicle dynamics and road holding ability. Vocabulary.) |
| NF R10-014 | 道路車輛.使用壓力檢測計進行曲柄軸箱壓力測量法 | (Road vehicles - Crankcase pressure measurement procedure using a pressure probe.) |
| NF R10-019 | 測量車輛排氣的儀器 | (Instruments for measuring vehicle exhaust emissions.) |
| NF R10-021 | 道路車輛.廢氣系統排泄定位和設備規范 | (Road vehicles - Localization of exhaust system leaks and equipment specifications.) |
| NF R10-024 | 道路車輛.機動車道路負載.底盤功率計的復現和在參考大氣條件下測定道路負載 | (Road vehicles. Motor vehicle road load. Determination under reference atmospheric conditions and reproduction on chassis dynamometer.) |
| NF R10-025-1 | 道路車輛.壓燃式發動機廢氣阻光度的測量.第1部分:標準(參考)暗度計 | (Road vehicles. Measurement of the opacity of exhaust gas from compression ignition (diesel) engines. Part 1 : standard (reference) opacimeter.) |
| NF R10-025-2 | 道路車輛.壓燃式發動機廢氣阻光度的測量.第2部分:局部流動商業暗度計的技術規范 | (Road vehicles. Measurement of the opacity of exhauts gas from compression ignition (diesel) engines. Part 2 : technical specifications for partial flow commercial opacimeters.) |
| NF R10-025-3 | 道路車輛.壓燃式發動機廢氣阻光度的測量.第3部分:可見污染物的檢測程序(廢氣的阻光度) | (Road vehicles. Measurement of the opacity of exhaust gas from compression ignition (diesel) engines. Part 3 : monitoring procedure of visible pollutants (opacity of exhaust gas).) |
| NF R10-025-4 | 道路車輛.壓燃式發動機廢氣阻光度的測量.第4部分:局部流動商業暗度計的檢測程序 | (Road vehicles. Measurement of the opacity of exhaust gas from compression ignition (diesel) engines. Part 4 : monitoring procedures of partial flow commercial opacimeters.) |
| NF R10-101 | 汽車動態試驗用模擬人 | (ANTHROPOMORPHIC DUMMY FOR DYNAMIC TESTING OF MOTOR VEHICLES.) |
| NF R10-102 | 道路車輛.H點和R點的測定程序 | (Road vehicles - Procedure for H- and R-point determination.) |
| NF R10-105-1 | 道路車輛.安全氣囊元部件.第1部分:詞匯 | (Road vehicles - Airbag components - Part 1 : vocabulary.) |
| NF R10-105-2 | 道路車輛.氣囊組件.第2部分:氣囊組件的試驗 | (Road vehicles. Airbag components. Part 2 : testing of airbag modules.) |
| NF R10-105-3 | 道路車輛.安全氣囊元部件.第3部分:充氣機組件的檢驗 | (Road vehicles - Airbag components - Part 3 : testing of inflator assemblies.) |
| NF R10-113 | 道路車輛.兒童保護系統.有兒童乘客的事故報告格式 | (Road vehicles - Child restraint systems - Report form for accidents involving child passengers.) |
| NF R10-114-1 | 道路車輛.車輛中的錨固裝置和兒童約束系統用錨固裝置的附件.第1部分:座椅彎曲處的錨固裝置和附件 | (Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems - Part 1 : seat bight anchorages and attachments.) |
| NF R10-118 | 道路車輛.交通事故分析.第1部分:詞匯 | (Road vehicles -Traffic accident analysis - Part 1 : vocabulary.) |
| NF R10-212 | 道路車輛.沖擊試驗中的測量技術.儀器 | (Road vehicles - Measurement techniques in impact tests - Instrumentation.) |
| NF R10-213 | 道路車輛.沖撞試驗的測量.光學儀器 | (ROAD VEHICLES. MEASUREMENT TECHNIQUES IN IMPACT TEST. OPTICAL INSTRUMENTATION.) |
| NF R10-214 | 道路車輛.碰撞分類.術語 | (ROAD VEHICLES. COLLISION CLASSIFICATION. TERMINOLOGY.) |
| NF R10-215 | 道路車輛.正面固定障礙物碰撞試驗程序 | (Road vehicles - Frontal fixed barrier or pole impact test procedure.) |
| NF R10-302 | 道路車輛.垃圾收集車發出的空中噪聲測量 | (ROAD VEHICLES. MEASUREMENT OF AIR BORNE NOISE EMITTED BY REFUSE COLLECTION VEHICLES.) |
| NF R10-304 | 道路車輛.熱食品運輸車輛配備的制冷設備聲力級的測定.技能分類 | (ROAD VEHICLES. DETERMINATION OF SOUND POWER LEVEL FOR REFRIGERATION UNITS FITTED TO THERMAL GOODS TRANSPORT VEHICLES. EXPERTISE CLASS.) |
| NF R10-403 | 道路車輛.可循環和可恢復性.計算方法 | (Road vehicles - Recyclability and recoverability - Calculation method.) |
| NF R11-411 | 道路車輛.起動機齒輪.齒輪特性和檢驗 | (ROAD VEHICLES. STARTER-GEAR SYSTEM. GEAR CHARACTERISTICS AND CONTROL.) |
| NF R11-415 | 道路車輛.電動機起動器的電性能.試驗方法和一般要求 | (Road vehicles. Electrical performance of starter motors. Test methods and general requirements.) |
| NF R11-416 | 轎車.起動器的電連接件.尺寸特性 | (Passenger cars. Starter motor electrical connections. Dimensional characteristics.) |
| NF R12-204 | 運輸車輛和客車.變速箱法蘭.A型 | (COMMERCIAL VEHICLES AND BUSES. GEARBOX FLANGES. TYPE A.) |
| NF R12-205 | 運輸車輛和客車.變速箱法蘭.S型 | (COMMERCIAL VEHICLES AND BUSES. GEARBOX FLANGES. TYPE S.) |
| NF R12-401 | 商用車輛.功率輸出器 | (COMMERCIAL VEHICLES - POWER TAKE-OFF) |
| NF R12-403 | 運輸?shù)缆奋囕v.貨車側向動力輸出軸 | (Commercial road vehicles. Commercial vehicles. Side openings for truck power take-offs.) |
| NF R12-605 | 運輸車輛鼓式制動器 | (DRUM BRAKES FOR COMMERCIAL VEHICLES.) |
| NF R12-611 | 特種車輛鼓形制動器 | (DRUM BRAKES FOR PASSENGER CARS) |
| NF R12-612 | 道路車輛.制動閘襯.壓縮應變試驗方法 | (Road vehicles - Brake linings - Compressive strain test method.) |
| NF R12-613 | 道路車輛.制動磨擦片.磨擦法抗剪強度.試驗規程 | (ROAD VEHICLES. BRAKE LININGS. INTERNAL SHEAR STRENGTH OF LINING MATERIAL. TEST PROCEDURE.) |
| NF R12-614 | 道路車輛.制動閘襯.圓盤制動片和鼓式制動器蹄片組件的剪切試驗程序 | (Road vehicles - Brake linings - Shear test procedure for disc brake pad and drum brake shoe assemblies.) |
| NF R12-615 | 道路車輛.制動磨擦片.閘瓦發熱效應.試驗方法 | (ROAD VEHICLES. BRAKE LININGS. EFFECTS OF HEAT ON DIMENSIONS AND FORM OF DISC BRAKE PADS. TEST PROCEDURE.) |
| NF R12-616 | 道路車輛.制動磨擦片,抗水性、抗堿溶液性、抗油脂和抗制動液性能.試驗規程 | (ROAD VEHICLES. BRAKE LININGS. RESISTANCE TO WATER,SALINE SOLUTION,OIL AND BRAKE FLUID. TEST PROCEDURE.) |
| NF R12-617 | 道路車輛.制動器磨擦片.硬金屬表面的粘連性試驗方法 | (ROAD VEHICLES. BRAKE LININGS. SEIZURE TO FERROUS MATING SURFACE DUE TO CORROSION. TEST PROCEDURE.) |
| NF R12-618 | 道路車輛.使用非石油基液壓液的液壓制動系統軟管組件 | (Road vehicles. Brake hose assemblies for hydraulic braking systems used with a non-petrolum-base brake fluid.) |
| NF R12-619 | 道路車輛.使用石油基液壓液的液壓制動系統制動軟管總成 | (Road vehicles. Brake hose assemblies for hydraulic braking systems used with a petrolum-base brake fluid.) |
| NF R12-622 | 道路車輛.安裝在底座上的,單汽缸三角皮帶傳動的空氣壓縮機.安裝尺寸 | (ROAD VEHICLES. BASE-MOUNTED AIR COMPRESSORS,SINGLE CYLINDER V-BELT DRIVE. MOUNTING DIMENSIONS.) |
| NF R12-634-1 | 道路車輛.氣動制動系統.第1部分:帶平面密封面的管,陽模管配合件,螺紋孔 | (Road vehicles. Pneumatic braking systems. Part 1 : pipes, male fittings and tapped holes with facial sealing surface.) |
| NF R12-634-2 | 道路車輛.氣動制動系統.第1部分:帶錐形密封面的管,陽模管配合件,螺紋孔 | (Road vehicles. Pneumatic braking systems. Part 2 : pipes, male fittings and tapped holes with conical sealing surface.) |
| NF R12-635 | 道路車輛.壓縮空氣制動裝置.儀表孔的定位 | (ROAD VEHICLES. AIR BRAKING SYSTEMS. IDENTIFICATION OF CONNECTIONS ON UNITS.) |
| NF R12-636 | 道路車輛.液壓制動系統.導管、螺紋孔、外螺紋接頭和軟管管端接頭 | (Road vehicles. Hydraulic braking systems. Simple flare pipes, tapped holes, male fittings and hose end fittings.) |
| NF R12-639 | 道路車輛.制動液類型圖形符號 | (Road vehicles. Graphical symbols to designate brake fluid types.) |
| NF R12-642 | 道路車輛.液壓制動器.非石油為基礎的參考液體 | (Road vehicles. Hydraulic braking systems. Non-petroleum base reference fluids.) |
| NF R12-644 | 道路車輛.液壓制動.ISO石油基標準液體 | (Road vehicles. Hydraulic brake systems. ISO reference petroleum base fluid.) |
| NF R12-645 | 道路車輛.使用石油基液壓制動液(最高工作溫度120℃)C)的鼓式閘輪液壓缸用彈性O(shè)形密封圈 | (Road vehicles. Elastomeric O-rings for hydraulic drum brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.).) |
| NF R12-646 | 道路車輛.使用石 油基液壓制動液(最高工作溫度120℃)C)的液壓制動系統用彈性環和密封件 | (ROAD VEHICLES. ELASTOMERIC CUPS AND SEALS FOR CYLINDERS FOR HYDRAULIC BRAKING SYSTEMS USING A PETROLEUM BASE HYDRAULIC BRAKE FLUID (SERVICE TEMPERATURE 120 DEGRES C MAX.).) |
| NF R12-647 | 道路車輛.使用石油基液壓制動液(最高工作溫度120℃)C)的盤式制動液壓缸用彈性密封件 | (Road vehicles. Elastomeric seals for hydraulic disc brake cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max).) |
| NF R12-648 | 道路車輛.使用石油基液壓制動液(最高工作溫度120℃)C)的鼓式閘輪液壓缸用彈性套 | (ROAD VEHICLES. ELASTOMERIC BOOTS FOR DRUM TYPE HYDRAULIC BRAKE WHEEL CYLINDERS USING A PETROLEUM BASE HYDRAULIC BRAKE FLUID (SERVICE TEMPERATURE 120 DEGREES C MAX).) |
| NF R12-650 | 道路車輛.壓縮氣制動設備的壓力傳感器 | (Road vehicles. Pressure test connection for compressed-air pneumatic braking equipment.) |
| NF R12-651 | 道路車輛,液壓制動設備的壓力傳感器 | (Road vehicles. Hydraulic pressure test connection for braking equipment.) |
| NF R12-652 | 道路車輛.液壓傳動制動裝置.制動性能的測定 | (ROAD VEHICLES. HYDRAULIC BRAKING SYSTEMS. MEASUREMENT OF BRAKING PERFORMANCE.) |
| NF R12-653 | 道路車輛.氣壓傳動或液-氣傳動制動裝置.制動性能的測定 | (ROAD VEHICLES. AIR OR AIR OVER HYDRAULIC BRAKING SYSTEMS. MEASUREMENT OF BRAKING PERFORMANCE.) |
| NF R12-716 | 載重車輪胎.第716部分:輪胎翻新的推建標準 | (TRUCK TYRES. RECOMMENDATIONS FOR RETREADING.) |
| NF R12-743-1 | 客車的輪胎和輪輞.第1部分:輪胎(米制系列) | (Passenger car tyres and rims - Part 1 : tyres (metric series).) |
| NF R12-744 | 客車輪胎.翻新推建標準 | (TYPES FOR PASSENGERS CARS. RECOMMENDATIONS FOR RETREADING.) |
| NF R12-775 | 運輸汽車車輪.軸和固定螺母 | (ROAD VEHICLES. WHEELS FOR COMMERCIAL VEHICLES. ATTACHEMENT STUD AND NUT.) |
| NF R12-780 | 公路車輛.連接輔助設備.連接尺寸 | (ROAD VEHICLES. ADDITIONAL FOR GRIP. OVERALL DIMENSIONS.) |
| NF R12-790 | 車輪、車圈.術語、名稱、標記和測量單位 | (Wheels. Rims. Nomenclature. Designation. Marking and units of measurement.) |
| NF R12-791-2 | 特種汽車輪胎和輪輞 | (Passenger car tyres and rims. Rims.) |
| NF R12-792-2 | 運輸車輛的輪胎網.第2部分:輪網 | (Truck and bus tyres and rims (metric series). Part 2 : rims.) |
| NF R12-902 | 道路車輛.ＰＴＡＣ型大于３．５t商用車輛和公共運輸車輛的墊板.功能特性 | (ROAD VEHICLES. WHEEL CHOCKS FOR COMMERCIAL VEHICLES OF MORE THAN 3,5 T OF PTAC AND BUSES. FUNCTIONAL CHARACTERISTICS.) |
| NF R13-002-1 | 道路車輛.由傳導和耦合引起的電干擾.第1部分:定義和總則 | (Road vehicles - Electrical interference by conduction and coupling - Part 1 : definitions and general considerations.) |
| NF R13-002-2 | 道路車輛.通過連接和耦合的電干擾.第2部分:額定24伏特供電電壓的商用車輛.通過供電線和插件板網絡控制線的 | (ROAD VEHICLES. ELECTRICAL DISTURBANCE BY CONDUCTION AND COUPLING. PART 2 : COMMERCIAL VEHICLES WITH NOMINAL 24 V SUPPLY VOLTAGE. ELECTRICAL TRANSIENT CONDUCTION ALONG SUPPLY LINES AND BOARD NETWORK CONTROL LINES.) |
| NF R13-002-3 | 道路車輛.電導和耦合引起的電干擾.第3部分:標稱電源電壓12V或24V的車輛.通過電容耦合和電感耦合經由非電源 | (Road vehicles. Electrical disturbance by conduction and coupling. Part 3 : vehicles with nominal 12 V or 24 V supply voltage. Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines.) |
| NF R13-007-1 | 道路車輛.機動車部件的電磁兼容性試驗程序.第1部分:總則和定義 | (Road vehicles - Electromagnetic compatibility test procedure of automotive components - Part 1 : definitions and generalities.) |
| NF R13-007-2 | 道路車輛.機動車部件的電磁兼容性試驗程序.第2部分:判定傳導干擾 | (Road vehicles - Electromagnetic compatibility test procedure of automotive components - Part 2 : qualification conduction emitted interference.) |
| NF R13-007-3 | 道路車輛.機動車部件的電磁兼容性試驗程序.第3部分:判定輻射干擾 | (Road vehicles - Electromagnetic compatibility test procedure of automotive components - Part 3 : qualification radiation emitted interference.) |
| NF R13-007-5 | 道路車輛.機動車零件電磁兼容性試驗過程.試驗5:根據吸收室過程的窄譜帶分配抗性的合格性 | (ROAD VEHICLES. ELECTROMAGNETIC COMPATIBILITY TEST PROCEDURE OF AUTOMOTIVE COMPONENTS. PART 5 : QUALIFICATION OF NARROWBAND DISTURBANCE IMMUNITY ACCORDING TO ABSORPTIVE CHAMBER PROCEDURE.) |
| NF R13-007-6 | 道路車輛.機動車部件的電磁兼容性試驗程序.第4部分:根據電流發射程序判定抗窄帶干擾 | (Road vehicles - Electromagnetic compatibility test procedure of automotive components - Part 6 : qualification of the immunity to narrowband interference according to the current injection procedure.) |
| NF R13-008-1 | 道路車輛.摩托車電磁兼容性試驗程序.第1部分:定義和總則 | (Road vehicles - Electromagnetic compatibility test procedure of motor vehicles - Part 1 : definitions and generalities.) |
| NF R13-008-2 | 道路車輛.機動車的電磁兼容性試驗程序.第2部分:在半吸音室判定抗電磁干擾 | (Road vehicles - Electromagnetic compatibility test procedure of motor vehicles - Part 2 : qualification of the immunity to electromagnetic interference in a semi-anechoic chamber.) |
| NF R13-202 | 道路車輛.組合式帶整流器的交流發電機.試驗方法和試驗的一般條件 | (Road vehicles. Alternators with regulators. Test methods and general requirements.) |
| NF R13-203 | 特種車輛和派生車輛.組合式帶整流器的交流發電機.尺寸特性 | (PASSENGER CARS AND SIMILAR VEHICLES. ALTERNATORS WITH INCORPORATED REGULATORS. DIMENSIONAL CHARACTERISTICS.) |
| NF R13-318 | 道路車輛.帶平座和16mm六角M14×1.25火花塞及其在汽缸蓋上的座孔 | (Road vehicles - M14 x 1,25 spark-plugs with flat seating and 16 mm hexagon and their cylinder head housings.) |
| NF R13-321-1 | 道路車輛.點火系統.第1部分:詞匯 | (Road vehicles - Ignition systems - Part 1 : vocabulary.) |
| NF R13-321-2 | 道路車輛.點火系統.第2部分:電氣性能和功能試驗 | (Road vehicles. Ignition systems. Part 2 : electrical performance and function test methods.) |
| NF R13-323 | 道路車輛.未分級的高張力點火電纜組件.一般要求和試驗方法 | (Road vehicles. Unscreened high-tension ignition cable assemblies. General requirements and test methods.) |
| NF R13-328 | 道路車輛.內燃機.火花塞點火.術語 | (ROAD VEHICLES. INTERNAL COMBUSTION ENGINES. SPARK PLUNG INGNITION. TERMINOLOGY.) |
| NF R13-330 | 道路車輛.火花塞.終端 | (ROAD VEHICLES. SPARK-PLUGS. TERMINALS.) |
| NF R13-402 | 汽車用雙觸點微型熔斷絲 | (2 connection miniature fuses for motor vehicles.) |
| NF R13-403 | 道路車輛.電連接.兩孔插銷.(歐洲標準 EN 24165) | (Road vehicles. Electrical connections. Double-pole connector.) |
| NF R13-403 | 道路車輛.電氣連接.雙極接線盒 | (Road vehicles - Electrical connections - Double-pole connection.) |
| NF R13-404 | 道路車輛.燃油泵的電連接件 | (Road vehicles. Fuel pump electric connections.) |
| NF R13-405 | 汽車儀表盤剛性支架印制電路 | (Printed circuits on rigid bases for vehicle control panels.) |
| NF R13-417 | 道路車輛.無屏蔽高壓點火電纜.第1部分:尺寸、一般要求和試驗方法 | (Road vehicles. Unscreened high-tension ignition cables. Part 1 : dimensions, general requirements and test methods.) |
| NF R13-418 | 道路車輛.非鎧裝高壓點火電纜.電纜分級、型號、試驗和特殊規格 | (Road vehicles. Unscreened high-tension ignition cables. Cable classes, types, applicable tests and special requirements.) |
| NF R13-419-1 | 道路車輛.多芯連接電纜.第1部分:基本性能鎧裝電纜的試驗方法和要求 | (Road vehicles - Multicore connecting cables - Part 1 : test methods and requirements for basic performance sheathed cables.) |
| NF R13-419-2 | 道路車輛.多芯連接電纜.第2部分:高性能鎧裝電纜的試驗方法和要求 | (Road vehicles - Multicore connecting cables - Part 2 : test methods and requirements for high performance sheathed cables.) |
| NF R13-419-3 | 道路車輛.多芯連接電纜.第3部分:非屏蔽鎧裝低壓電纜的制造、尺寸和標記 | (Road vehicles - Multicore connecting cables - Part 3 : construction, dimensions and marking of unscreened sheathed low-voltage cables.) |
| NF R13-421 | 道路車輛.無屏蔽高壓點火電纜.總規范、試驗方法和要求 | (Road vehicles - Unscreened high-voltage ignition cables - General specifications, test methods and requirements.) |
| NF R13-425 | 道路車輛.電器連接用4毫米圓柱形插頭 | (Road vehicles. Connections with 4 mm cylindrical pins. Dimensional characteristics.) |
| NF R13-433 | 道路車輛.無板銷釘聯鎖設備的連接.功能特性 | (Road vehicles. Flat tab connections without positive locking. Functional characteristics.) |
| NF R13-437 | 道路車輛.帶板銷釘聯鎖設備的連接.功能特性 | (Road vehicles. Flat tab connections with positive locking. Functional characteristics.) |
| NF R13-439 | 道路車輛.電子線路板的成組配線裝置.第1部分:單極聯接接頭標記.尺寸與特殊要求 | (Road vehicules. Connections for on-board electrical wiring harnesses. Part 1 : tabs for single-pole connections. Dimensions and specific requirements.) |
| NF R13-440-2 | 道路車輛.車上電線束用連接.第2部分:定義、試驗方法和通用性能要求 | (Road vehicules - Connections for on-board electrical wiring harnesses - Part 2 : definitions, test methods and general performance requirements.) |
| NF R13-441 | 商品運輸車輛客用車輛蓄電池開關 | (ROAD VEHICLES. ISOLATING SWITCH FOR BUSES AND COMMERCIAL VEHICLES. DIMENSIONAL CHARACTERISTICS AND FUNCTIONAL SPECIFICATIONS.) |
| NF R13-450 | 道路車輛電源供電設備連接用小型耦合器 | (Mini-couplers for the interconnection of electrical mains supplied equipment in road vehicles.) |
| NF R13-459 | 道路車輛.線路板密封和非密封連接件連接界面.總則 | (Road vehicles. Connection interface for on-board sealed and unsealed connectors. General.) |
| NF R13-462 | 道路車輛.車裝防水連接器用連接接口.0.64mm和/或1.5mm四列連接器 | (Road vehicles - Connection interface for on-board waterproof connectors - Connectors with four rows of 0,64 mm and/or 1,5 mm.) |
| NF R13-480 | 道路車輛.非密封機載連接器用連接界面.1.5MM和/或2.8MM一棧接觸連接器 | (ROAD VEHICLES. CONNECTION INTERFACE FOR UNSEALED ON-BOARD CONNECTORS. CATEGORY 1,5 MM AND/OR 2,8 MM ONE STACK CONTACT CONNECTORS.) |
| NF R13-483 | 道路車輛.點火裝置用的連接器.點火裝置和梁式連接器之間的連接接口 | (Road vehicles - Connectors for pyrotechnic devices - Connection interface between pyrotechnic device and the beam connector.) |
| NF R13-50311 | 特種車輛和輕型運輸車輛起動用鉛蓄電池 | () |
| NF R13-507 | 鉛酸起動電池組.第4部分:重型商用車輛用蓄電池組的尺寸 | (Lead-acid starter batteries. Part 4 : dimensions of batteries for heavy commerical vehicles.) |
| NF R13-510 | 道路車輛.鉛蓄電池電流開關 | (ROAD VEHICLES. ACCUMULATOR BATTERY SWITCH. OVERALL DIMENSIONS AND DRILLING CHARACTERISTICS.) |
| NF R13-623 | 道路車輛.前小燈探照燈方向校正裝置 | (ROAD VEHICLES. LEVELLING DEVICES FOR HEADLAMP DIPPED BEAM.) |
| NF R13-624 | 道路車輛.專用示警燈.尺寸 | (ROAD VEHICLES. SPECIAL WARNING LAMPS. DIMENSIONS.) |
| NF R13-625 | 道路車輛.機動車輛及其掛車的燈光和燈光信號設備 | (ROAD VEHICLES. INSTALLATION OF LIGHTING AND LIGHT SIGNALLING DEVICES FOR MOTOR VEHICLES AND THEIR TRAILERS.) |
| NF R13-626 | 道路車輛.照明系統和燈光指示裝置.詞匯 | (ROAD VEHICLES. LIGHTING AND LIGHT SIGNALLING DEVICES. VOCABULARY.) |
| NF R13-629 | 道路車輛用白熾燈.尺寸.電氣和照明要求 | (Filament lamps for road vehicles. Dimensional, electrical and luminous requirements.) |
| NF R13-629/A2 | 道路車輛用照明燈.尺寸.電氣和照明要求 | (Lamps for road vehicles - Dimensional, electrical and luminous requirements.) |
| NF R13-6291 | 道路車輛用燈.尺寸.電氣和照明要求 | () |
| NF R13-630 | 道路車輛燈.性能要求 | (Lamps for road vehicles. Performances requirements.) |
| NF R13-640 | 汽車及其拖車車燈電源電壓 | (Road vehicles. Working voltages for lights fitted to motor vehicles and to their trailers.) |
| NF R13-702 | 道路車輛.報警插頭.接頭.機械特性 | (ROAD VEHICLES. DIAGNOSTIC PLUG. CONNECTOR. MECHANICAL CHARACTERISTICS.) |
| NF R13-704 | 道路車輛.診斷系統.圖形符號 | (Road vehicles. Diagnostic systems. Graphical symbols.) |
| NF R13-705 | 道路車輛.電子裝置診斷 | (Road vehicles. Diagnostic testing of electronic systems.) |
| NF R13-706 | 道路車輛.報警系統.點火系統檢驗設備 | (ROAD VEHICLES. DIAGNOSTIC SYSTEMS. EQUIPMENT FOR IGNITION SYSTEMS TESTING.) |
| NF R13-710 | 道路車輛.低速系列數據通信.第1部分:概述和定義 | (Road vehicles. Low-speed serial data communication. Part 1 : generals and definitions.) |
| NF R13-713 | 道路車輛.診斷系統.診斷設備規范 | (Road vehicles - Diagnostic systems - Diagnostic services specification.) |
| NF R13-714-1 | 道路車輛.診斷系統.關鍵詞協議2000.第1部分:物理層 | (Road vehicles - Diagnostic systems - Keyword Protocol 2000 - Part 1 : physical layer.) |
| NF R13-714-2 | 道路車輛.診斷系統.關鍵詞協議2000.第2部分:數據鏈路層 | (Road vehicles - Diagnostic systems - Keyword Protocol 2000 - Part 2 : data link layer.) |
| NF R13-714-3 | 道路車輛.診斷系統.關鍵詞協議2000.第3部分:應用層 | (Road vehicles - Diagnostic systems - Keyword Protocol 2000 - Part 3 : application layer.) |
| NF R13-902 | 道路車輛.無線電天線.在頂篷上的固定 | (Road vehicles. Antennas. Roof mounting.) |
| NF R13-903 | 道路車輛.運送危險品用3.5噸以上商業車輛和牽引車(N2,N3,03,T 04類).電氣裝置的導管和配件.試驗方法和要求 | (ROAD VEHICLES. COMMERCIAL VEHICLES AND TOWED VEHICLES HAVING A GVW (R) OF OVER 3,5 T (categories N2, N3, O3 AND O4) ASSIGNED FOR TRANSPORTATING DANGEROUS GOODS. CONDUITS AND FITTINGS FOR ELECTRICAL INSTALLATIONS. TEST METHODS AND REQUIREMENTS.) |
| NF R13-910 | 道路車輛.電氣和電子設備.電氣設備集成模型的翻譯語言 | (Road vehicles. Electrical and electronic equipment. Translation language of models for integration of the electronic equipment.) |
| NF R14-210 | 道路車輛.環形箱內控制儀表.嵌入直徑和刻度型式 | (Road vehicles. Check instruments with circular case. Recess diameters and gradations types.) |
| NF R14-216 | 道路車輛.速度指示器.快速安裝型活動插頭 | (Road vehicles. Speedometer. Quick setting power take-off.) |
| NF R14-313 | 公路車輛.喇叭.在車上安裝后的試驗 | (ROAD VEHICLES. SOUND SIGNALLING DEVICES. TESTS AFTER MOUNTING ON VEHICLE.) |
| NF R14-331-1 | 道路車輛.電/電子開關設備.第1部分:繼電器和閃光器 | (Road vehicles - Electrical/electronical switching devices - Part 1 : relays and flashers.) |
| NF R14-331-2 | 道路車輛.電/電子開關設備.第2部分:電子設備 | (Road vehicles - Electrical/electronic switching devices - Part 2 : electronic devices.) |
| NF R14-331-3 | 道路車輛.電/電子開關設備.第3部分:微型繼電器 | (Road vehicles - Electrical/electronical switching devices - Part 3 : microrelays.) |
| NF R14-332 | 道路車輛.摩托車閃光器的電特性 | (Road vehicles. Motor vehicles flasher units. Electrical characteristics.) |
| NF R14-333 | 道路車輛.汽車中心閃光器.生產適合性 | (ROAD VEHICLES. MOTOR VEHICLES FLASHER UNITS. PRODUCTION CONFORMITY.) |
| NF R14-408 | 道路車輛.前燈清潔器 | (Raod vehicles. Headlamp cleaners.) |
| NF R14-409 | 道路車輛.后視鏡.反射率測定的試驗方法 | (Road vehicles. Rear view mirrors. Test method for determining reflectance.) |
| NF R14-504 | 轎車.擋風玻璃雨刷裝置.雨刷刮片長度 | (Passenger cars. Windscreen wiper systems. Wiper blade length.) |
| NF R14-505 | 轎車.擋風玻璃雨刷裝置.刮雨桿與刮片的連接 | (Passenger cars. Windscreen wiper systems. Wiper arm-to-blade connections.) |
| NF R14-601 | 道路車輛.剛性塑料安全玻璃材料試驗 | (Road vehicles - Tests for rigid plastic safety glazing materials.) |
| NF R14-602 | 道路車輛.安全玻璃材料.機械試驗 | (Road vehicles - Safety glazing materials - Mechanical tests.) |
| NF R14-705 | 道路車輛.運輸信息和控制系統的人類工效學特性.對話管理原則和一致性程序 | (Road vehicles - Ergonomic aspects of transport information and control systems - Dialogue management principles and compliance procedures.) |
| NF R14-707-1 | 道路車輛.與運輸信息和控制系統有關的司機視野特性的測量.第1部分: 定義和參數 | (Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Part 1 : definitions and parameters.) |
| NF R14-708 | 道路車輛.運輸信息和控制系統的人類工效學方面.車內目視顯示規范和一致性規程 | (Road vehicles - Ergonomic aspects of transport information and control systems - Specifications and compliance procedures for in-vehicle visual presentation.) |
| NF R14-709 | 道路車輛.運輸信息和控制系統的工效學.駕駛時適用性的評定規程 | (Road vehicles - Ergonomic aspects of transport information and control systems - Procedure for assessing suitability for use while driving.) |
| NF R15-402 | 道路車輛.溫度開關.試驗方法和要求 | (ROAD VEHICLES. THERMOMETRIC SWITCHES. TEST METHODS AND REQUIREMENTS.) |
| NF R15-403 | 道路車輛.溫度開關.尺寸特性 | (ROAD VEHICLES. THERMOMETRIC SWITCHES. DIMENSIONAL CHARACTERISTICS.) |
| NF R15-504 | 汽車制造用梯形環形皮帶.幾何特性 | (ENDLESS V BELTS-GEOMETRICAL CHARACTERISTICS.) |
| NF R15-509 | 汽車工業用窄三角皮帶傳動.疲勞試驗 | (Narrow-V-belt drives for the automotive industry. Fatigue test.) |
| NF R15-601 | 道路車輛.冷卻液.總規范和要求 | (ROAD VEHICLES. COOLING FLUIDS. GENERAL SPECIFICATIONS AND REQUIREMENTS.) |
| NF R15-602-1 | 道路車輛.冷卻液.試驗方法.第1部分:用比重計進行密度的測定 | (ROAD VEHICLES. COOLING FLUIDS. TEST METHODS. PART 1 : MEASUREMENT OF DENSITY USING AN AREAMETER.) |
| NF R15-602-2 | 道路車輛.冷卻液.試驗方法.第2部分:折射系數的測定 | (ROAD VEHICLES. COOLING FLUIDS. TEST METHODS. PART 2 : MEASUREMENT OF REFRACTION INDEX.) |
| NF R15-602-3 | 道路車輛.冷卻液.試驗方法.第3部分:灰份含量的測定 | (ROAD VEHICLES. COOLING FLUIDS. TEST METHODS. PART 3 : MEASUREMENT OF ASH CONCTENT.) |
| NF R15-602-4 | 道路車輛.冷卻液.試驗方法.第4部分:沸騰溫度的測定 | (ROAD VEHICLES. COOLING FLUIDS. TEST METHODS. PART 4 : MEASUREMENT OF BOILING POINT.) |
| NF R15-602-6 | 道路車輛.冷卻液.試驗方法.第6部分:硬水適宜性的測定 | (ROAD VEHICLES. COOLING FLUIDS. TEST METHODS. PART 6 : MEASUREMENT OF COMPATIBILITY WITH HARD WATER.) |
| NF R15-602-7 | 道路車輛.冷卻液.試驗方法.第7部分:防腐蝕性能的測定.玻璃腐蝕方法 | (ROAD VEHICLES. COOLING FLUIDS. TEST METHODS. PART 7 : MEASUREMENT OF CORROSION PROTECTION PROPERTIES. GLASSWARE CORROSION METHOD.) |
| NF R15-602-8 | 道路車輛.冷卻液.試驗方法.第8部分:防腐蝕性能的測定.熱板腐蝕方法 | (ROAD VEHICLES. COOLING FLUIDS. TEST METHODS. PART 8 : MEASUREMENT OF CORROSION PROTECTION PROPERTIES. HOT PLATE CORROSION METHOD.) |
| NF R15-602-9 | 道路車輛.冷卻液.試驗方法.第9部分:防腐蝕性能的測定.抗偏壓電阻方法 | (ROAD VEHICLES. COOLING FLUIDS. TEST METHODS. PART 9 : MEASUREMENT OF CORROSION PROTECTION PROPERTIES. GRID LEAK RESISTOR METHOD.) |
| NF R15-703-1 | 道路車輛.罩型點火塞及汽缸蓋上的座孔尺寸.第1部分:M14×1.25熱線點火塞 | (Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing. Part 1 : M14 X 1,25 glow-plugs.) |
| NF R15-703-2 | 道路車輛.罩型點火塞及汽缸蓋上的座孔尺寸.第2部分:M12×1.25熱線點火塞 | (Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing. Part 2 : M12 X 1,25 glow-plugs.) |
| NF R15-704 | 道路車輛.封裝式預熱塞. 一般要求和試驗方法 | (Road vehicles - Sheath-type glow-plugs - General requirements and test methods.) |
| NF R16-131 | 道路車輛.液化石油氣供油咀.尺寸特性 | (ROAD VEHICLES. GPL NOZZLE SPOUTS. DIMENSIONAL CHARACTERISTICS.) |
| NF R16-132 | 道路車輛.無鉛汽油的注油口 | (Road vehicles. Nozzle spouts for unleaded gasoline.) |
| NF R16-133 | 道路車輛.含鉛汽油和柴油注油口 | (Road vehicles. Nozzle spouts for leaded gasoline and diesel fuel.) |
| NF R16-209 | 道路車輛.壓縮點火內燃機水平凸緣燃油過濾器端部.安裝尺寸和兩次過濾器連接尺寸 | (ROAD VEHICLES. HEADS FOR FUEL FILTERS WITH HORIZONTAL FLANGE FOR COMPRESSION IGNITION ENGINES. MOUNTING AND CONNECTING DIMENSIONS.) |
| NF R16-210 | 公路車輛.壓縮點火內燃機垂直凸緣三栓燃油過濾器端部.安裝和連接尺寸 | (ROAD VEHICLES. HEADS FOR FUEL FILTERS WITH VERTICAL FLANGE AND THREE BOLT FIXING FOR COMPRESSION IGNITION ENGINES. MOUNTING AND CONNECTING DIMENSIONS.) |
| NF R16-217 | 道路車輛.壓燃內燃機用由定心螺栓固定和帶水平法蘭的單極燃油濾清器.安裝和連接尺寸 | (ROAD VEHICLES. SINGLE FUEL FILTERS WITH HORIZONTAL FLANGES AND CENTRE BOLT FIXING FOR COMPRESSION IGNITION ENGINES. MOUNTING AND CONNECTING DIMENSIONS.) |
| NF R16-218 | 道路車輛.壓燃內燃機用帶水平法蘭用螺栓固定的燃油濾清器頭.安裝和連接尺寸 | (ROAD VEHICLES. HEADS FOR SPIN-ON FUEL FILTERS WITH HORIZONTAL FLANGE FOR COMPRESSION IGNITION ENGINES. MOUNTING AND CONNECTING DIMENSIONS.) |
| NF R16-219 | 道路車輛.壓燃內燃機用帶垂直法蘭的燃油濾清器頭.安裝和連接尺寸 | (ROAD VEHICLES. HEADS FOR FUEL FILTERS WITH VERTICAL FLANGE FOR COMPRESSION IGNITION ENGINES. MOUNTING AND CONNECTING DIMENSIONS.) |
| NF R16-221 | 道路車輛.壓燃式發動機用自旋濾油器.安裝和連接尺寸 | (Road vehicles. Spin-on fuel filters for compression-ignition engines. Mounting and connecting dimensions.) |
| NF R16-315 | 道路車輛.柴油泵試驗.第1部分：動力條件 | (Fuel injection pump testing. Part 1 : dynamic conditions.) |
| NF R16-316 | 道路車輛.帶凸緣和節流閥式試驗噴咀 | (Road vehicles. Calibrating nozzle, delay pintle type.) |
| NF R16-317 | 道路車輛.燃油噴射泵.試驗用高壓管 | (Road vehicles. Fuel injection pumps. High-pressure pipes for testing.) |
| NF R16-318 | 道路車輛.噴油設備用試驗液體 | (Road vehicles. Calibration fluid for diesel injection equipment.) |
| NF R16-319 | 道路車輛.B型、S規格軸針式噴油嘴用20、21、21.1和27型旋入式噴油嘴保持座 | (Diesel engines - Screw-in injection nozzle holders, types 20, 21, 21.1 and 27 for pintle nozzle size “S“, type “B“.) |
| NF R16-321 | 道路車輛.平面底座直線固定噴油泵 | (ROAD VEHICLES. BASE MOUNTED IN-LINE FUEL INJECTION PUMPS.) |
| NF R16-322 | 道路車輛.噴油泵試驗.靜態條件 | (ROAD VEHICLES. FUEL INJECTION PUMP TESTING. STATIC CONDITIONS.) |
| NF R16-323 | 道路車輛.商用車輛空氣濾清部件.尺寸.Ａ和Ｂ型 | (ROAD VEHICLES. AIR FILTER ELEMENTS FOR COMMERCIAL VEHICLES. DIMENSIONS. TYPES A AND B.) |
| NF R16-324 | 道路車輛.載重汽車用空氣濾芯.C型和D型.尺寸 | (ROAD VEHICLES. AIR FILTER ELEMENTS FOR COMMERCIAL VEHICLES. TYPES C AND D. DIMENSIONS.) |
| NF R16-325 | 道路車輛.特種用途車輛用空氣濾芯.P型和R型.尺寸 | (ROAD VEHICLES. AIR FILTER ELEMENTS FOR PASSENGER CARS. TYPES P AND R. DIMENSIONS.) |
| NF R16-326 | 道路車輛.空氣濾清器接頭.A型和B型.尺寸 | (ROAD VEHICLES. AIR FILTER CONNECTIONS. TYPES A AND B. DIMENSIONS.) |
| NF R16-327 | 道路車輛.噴油泵用安裝法蘭.尺寸 | (ROAD VEHICLES. END-MOUNTING FLANGES FOR FUEL INJECTION PUMPS. DIMENSIONS.) |
| NF R16-330 | 道路車輛.弧形底安裝直列式噴油泵.安裝尺寸 | (Diesel engines - Cradle-mounted in-line fuel injection pumps - Mounting dimensions.) |
| NF R16-331 | 道路車輛.柴油發動機.22型螺栓固定的噴嘴 | (ROAD VEHICLES. DIESEL ENGINES. SCREW-IN INJECTOR,TYPE 22.) |
| NF R16-332-1 | 道路車輛.燃料噴射設備的試驗.第1部分:噴嘴檢驗及支架裝置 | (Road vehicles. Fuel injection equipment testing. Part 1 : calibrating nozzle and holder assemblies.) |
| NF R16-333 | 道路車輛.燃油噴射泵試驗.第3部分:產品應用和試驗 | (ROAD VEHICLES. FUEL INJECTION PUMP TESTING. PART 3 : APPLICATION AND TEST PROCEDURES.) |
| NF R16-335 | 道路車輛.壓燃式發動機.擰入式噴嘴座,23型 | (ROAD VEHICLES. COMPRESSION-IGNITION ENGINES. SCREW-IN INJECTION NOZZLE HOLDER,TYPE 23.) |
| NF R16-401 | 道路車輛.兩孔橢圓形輪凸緣 | (ROAD VEHICLES. TWO HOLE LIGHT OVAL FLANGES. DIMENSIONAL CHARACTERISTICS.) |
| NF R16-503 | 道路車輛.全負荷機油濾清器過濾部件.尺寸 | (ROAD VEHICLES. FILTER ELEMENTS FOR FULL FLOW OIL FILTERS. DIMENSIONS.) |
| NF R16-521 | 道路車輛.球面頭錐形短螺紋潤滑器.尺寸特性 | (Road vehicles. Lubricating spherical heads with short conical screw threads. Dimensional characteristics.) |
| NF R17-101 | 帶翻斗的車架 | (Chassis of vehicles equipped with dumping bodies.) |
| NF R17-102 | 道路車輛.運輸車輛.功率輸出軸和功率接受傳動裝置間的連接 | (Road vehicles. Commercial vehicles. Couplings between power take-offs (pto) and ancillary driven units.) |
| NF R17-104 | 道路車輛.液壓式抓斗.安全裝置 | (ROAD VEHICLES. DUMP TRUCKS. SAFETY ARRANGEMENTS.) |
| NF R17-105 | 道路車輛.活動翻斗用車輛.安全要求 | (Road vehicles - Vehicles for transportable skips- Safety requirements.) |
| NF R17-106 | 道路車輛.活動翻斗.功能尺寸和一般要求 | (Road vehicles - Transportable skips - Functional dimensions and general requirements.) |
| NF R17-107 | 道路車輛.可卸換翻斗的液壓懸臂式車輛.安全要求 | (Road vehicles - Vehicles equipped with hydraulic arms for removable skips - Safety requirements.) |
| NF R17-108 | 道路車輛.液壓懸臂式可卸換翻斗.功能尺寸和一般要求 | (Road vehicles - Removable skips for hydraulic arms - Functional dimensions and general requirements.) |
| NF R17-110 | 道路車輛.卡車后橫架上機械連接裝置安裝 | (Road vehicles. Mounting of mechanical coupling devices on rear cross members of trucks.) |
| NF R17-111 | 道路車輛.拖車后橫架上電連接裝置安裝 | (ROAD VEHICLES. TOWING VEHICLES. MOUNTING OF ELECTRICAL CONNECTIONS ON REAR CROSS MEMBERS.) |
| NF R17-112-1 | 垃圾收集車及其相關提升裝置.一般要求和安全要求.第1部分:尾部負載的垃圾收集車 | (Refuse collection vehicles and their associated lifting devices. General requirements and safety requirements. Part 1 : rear-end loaded refuse collection vehicles.) |
| NF R18-001 | 道路車輛.型號.名稱.定義 | (ROAD VEHICLES. TYPES. TERMS AND DEFINITIONS.) |
| NF R18-005 | 特種車輛.尺寸規則 | (DIMENSIONNAL CODES FOR PASSENGER CARS.) |
| NF R18-102 | 道路車輛.傾斜式駕駛員室發生危險的預防 | (ROAD VEHICLES. PREVENTION OF RISKS ARISING FROM TILTING-TYPE DRIVER`S CAB.) |
| NF R18-103 | 道路車輛.大于12噸的商用車輛.駕駛室進入方法 | (ROAD VEHICLES. COMMERCIAL VEHICLES OVER 12 TON. ACCESS TO DRIVER`S CAB.) |
| NF R18-150 | 道路車輛.傾斜型車身組件的強度.規范和試驗 | (Road vehicles. Strength of components of tilt type bodywork. Specifications and testing.) |
| NF R18-151 | 道路車輛.箱式送貨車車身組件的強度.規范和試驗 | (Road vehicles. Strength of body parts type van. Specifications and testing.) |
| NF R18-152 | 道路車輛.箱式送貨車和“薩瓦人”型車身.車身入口 | (Road vehicles. Box-type delivery van an tilt-type semi-trailer bodies. Access to the vehicle.) |
| NF R18-153 | 道路車輛.車身部件的強度.規范和試驗 | (ROAD VEHICLES. STRENGTH OF THE BODYWORK COMPONENTS OF BARE PLATFORMS. SPECIFICATIONS AND TESTING.) |
| NF R18-154 | 道路車輛.帶或不帶拉開式軟邊門的車身部件的強度.規范和試驗 | (ROAD VEHICLES. STRENGTH OF NON-RIGID SIDE WALL BODYWORK COMPONENTS,SLIDING OR NOT. SPECIFICATIONS AND TESTING.) |
| NF R18-401 | 道路車輛.12噸以上PTAC實用車輛座位的傳遞振動情況.試驗方法 | (Road vehicles. Vibrations transmitted by the seats of commercial vehicles of laden weight greater than 12 tons. Test methods.) |
| NF R18-701 | 道路車輛.氣候調節制冷液用循環管 | (ROAD VEHICLES. PIPES FOR CIRCULATING COOLANTS FOR AIR CONDITIONING.) |
| NF R18-702-1 | 道路車輛.安裝在3.5噸載重汽車上的自動加熱裝置.第1部分:一般安全規定 | (ROAD VEHICLES. SELF SUSTAINED HEATING SYSTEMS INSTALLED ON COMMERCIAL VEHICULES OVER 3,5 TONNES GVW(R). PART 1 : GENERAL SAFETY REQUIREMENTS.) |
| NF R18-702-2 | 道路車輛.3.5噸商業車輛上的自給式加熱系統.第2部分:氣體開動的丁烷/丙烷加熱系統 | (ROAD VEHICLES. SELF SUSTAINED HEATING SYSTEMS INSTALLED ON COMMERCIAL VEHICLES OVER 3,5 T GVW(R). PART 2 : SPECIFIC SAFETY REQUIREMENTS FOR GAZ OPERATED BUTAN/PROPAN HEATING SYSTEMS.) |
| NF R18-702-3 | 道路車輛.安裝在3.5噸載重汽車上的自動加熱裝置.第3部分:液體燃料裝置的特殊安全規定 | (ROAD VEHICLES. SELF SUSTAINED HEATING SYSTEMS INSTALLED ON COMMERCIAL VEHICLES OVER 3,5 TONNES GVW(R). PART 3 : SPECIFIC SAFETY REQUIREMENTS OF LIQUID FUEL OPERATED HEATING SYSTEMS.) |
| NF R18-702-4 | 道路車輛.安裝在3.5噸載重汽車上的自動加熱裝置.第4部分: 運輸危險物品車輛的特殊安全要求 | (Road vehicles. Seft sustained heating systems installed on commercial vehicles over 3,5 T gvw(R). Part 4 : specific safety requirements for vehicles transporting dangerous goods.) |
| NF R18-903-2 | 道路車輛.頂部荷載裝置.第2部分:附屬裝置和為特殊用途固定于頂梁的附屬裝置的固定 | (Road vehicles. Roof load carrier devices. Part 2 : accessories and their attachments to the roof bars for special purpose applications.) |
| NF R18-903-3 | 道路車輛.頂部荷載裝置.第3部分:特殊用途屋頂裝置 | (Road vehicles. Roof load carrier devices. Part 3 : specific purpose roof devices.) |
| NF R18-905-1 | 尾部升降機.安裝在輪式車輛上的平臺式升降機.安全要求.第1部分:貨運尾部升降機 | (Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 1 : tail lifts for goods.) |
| NF R19-102 | 道路車輛.公路車輛在鐵路上的運輸.外型結構尺寸 | (Road vehicles. Railway transportation. Full sized model.) |
| NF R19-110-1 | 滾裝船上海運用車輛捆綁和安全裝置.一般要求.第1部分:商業用車和車輛組合,半掛車除外(歐洲標準EN29367-1) | (Lashing and securing arrangements on road vehicles for sea transportation on ro/ro ships. General requirements. Part 1 : commercial vehicles and combinations of vehicles, semi-trailers excluded.) |
| NF R19-110-2 | 滾裝船上汽車?yán)壓凸潭ㄑb置的一般要求.第2部分:半掛車(歐洲標準EN 29367-2) | (Lashing and securing arrangements on road vehicles for sea transportation on ro/ro ships. General requirements. Part 2 : semi-trailers.) |
| NF R19-130 | 道路車輛.控制裝置、指示器和信號裝置的符號 | (Road vehicles - Symbols for controls, indicators and tell-tales.) |
| NF R19-201 | 道路車輛.車頭汽車收音機.包括連接件在內的安裝空間 | (Road vehicles. Car radio for front installation. Installation space including connections.) |
| NF R19-401-2 | 道路車輛.GSM移動電話.第2部分: GMS移動電話永久固定用線和連接物 | (Road vehicles. GSM mobile phones. Part 2 : wiring and connectics for GSM mobile phones mounted permanently.) |
| NF R19-401-3 | 道路車輛.GSM移動電話.第2部分: GMS移動電話可攜帶用線和連接物 | (Road vehicles. GSM mobile phones. Part 3 : wiring and connectics for GSM mobile phones portables.) |
| NF R19-401-4 | 道路車輛.GSM移動電話.第4部分:天線 | (Road vehicles. GSM mobile phones. Part 4 : antenna.) |
| NF R19-401-5 | 道路車輛.GSM移動電話.第5部分:免手提 | (Road vehicles. GSM mobiles phones. Part 5 : hand-free.) |
| NF R20-001 | 摩托車注冊登記 | (REGISTRATION PLATES FOR MOTORCYCLES.) |
| NF R20-101 | 道路車輛.微型汽車.性能和試驗 | (ROAD VEHICLES. MINI CARS. CHARACTERISTICS AND TESTS.) |
| NF R21-502 | 道路車輛.有點火裝置摩托車排出污染氣體的測量方法 | (Road vehicles. Measurement method of gaseous pollutants emitted by motorcycles equipped with a controlled ingition engine.) |
| NF R21-510 | 摩托自行車.發動機試驗規則.發動機加率 | (MOPEDS. ENGINE TEST CODE. NET POWER.) |
| NF R21-511 | 機動腳踏車.最大速度的測定 | (Mopeds. Measurement of the maximum speed.) |
| NF R21-512 | 道路車輛.由裝有控制點火發動機的機動腳踏兩用車排氣污染物測量方法 | (ROAD VEHICLES. MEASUREMENT METHODS FOR GASEOUS POLLUTANTS EMITTED BY MOPEDS EQUIPPED WITH A CONTROLLED IGNITION ENGINE.) |
| NF R22-601 | 自行車和摩托車鼓式制動器 | (DRUM BRAKES FOR CYCLES AND MOTORCYCLES.) |
| NF R22-731 | 摩托車輪胎和輪輞(指定系列規范).第1部分:型號 | (MOTORCYCLE TYRES AND RIMS (CODE DESIGNATED SERIES). PART 1 : TYRES.) |
| NF R22-732 | 機動腳踏車輪胎和輪輞(毫米制系列).第1部分:型號.全系列輪胎 | (MOTORCYCLE TYRES AND RIMS (METRIC SERIES). PART 1 : TYRES. ALL SERIES.) |
| NF R22-733 | 摩托車輪胎.摩托車輪胎和輪輞.（毫米系列）第2部分：100,90,80,70和60系列輪胎 | (MOTORCYCLE TYRES AND RIMS (METRIC SERIES). PART 2 : TYRE SERIES 100,90,80,70 AND 60.) |
| NF R23-103 | 摩托車磁發電機和直流發電機.錐軸端 | (MAGNETOS AND DYNAMOS FOR MOTORCYCLES.) |
| NF R24-301 | 摩托車前燈 | (HEADLIGHTS FOR MOTORCYCLES.) |
| NF R24-302 | 摩托車前燈 | (HEADLIGHTS FOR MOTORCYCLES.) |
| NF R24-311 | 道路車輛.摩托車.直流閃光裝置 | (ROAD VEHICLES. MOTORCYCLES. DIRECT CURRENT FLASHER UNITS.) |
| NF R24-312 | 道路車輛.摩托車.交流閃光裝置 | (ROAD VEHICLES. MOTORCYCLES. ALTERNATING CURRENT FLASHER UNITS.) |
| NF R24-313 | 道路車輛.機動腳踏兩用車.直流閃光裝置 | (ROAD VEHICLES. MOPEDS. DIRECT CURRENT FLASHER UNITS.) |
| NF R24-314 | 道路車輛.機動腳踏兩用車.交流閃光裝置 | (ROAD VEHICLES. MOPEDS. ALTERNATING CURRENT FLASHER UNITS.) |
| NF R26-201 | 摩托車燃料供應 | (MOTORCYCLE FUEL FEED.) |
| NF R26-301 | 摩托車化油器.安裝 | (MOTORCYCLE CARBURETORS. FIXING.) |
| NF R27-301 | 道路車輛.摩托車后部減震器安裝 | (ROAD VEHICLES. MOTORCYCLES. MOUNTING OF REAR SHOCK ABSORBERS.) |
| NF R28-001 | 道路車輛.兩輪摩托車和摩托自行車尺寸.名稱和定義 | (ROAD VEHICLES. DIMENSIONS OF TWO WHEELED MOPEDS AND MOTORCYCLES. TERMS AND DEFINITIONS.) |
| NF R29-001 | 規范.摩托車用轉向盤柱鎖 | (SPECIFICATIONS. STEERING COLUMN LOCKS FOR MOTORCYCLES.) |
| NF R29-010 | 實用導則.摩托車用電子鎖 | (PRACTICAL GUIDE. ELECTRONIC LOCKS FOR MOTORCYCLES.) |
| NF R30-004 | 自行車.所有山地車的安全條件 | (Bicycles. Safety requirements for all terrain bike.) |
| NF R30-020 | 自行車.年青人用的自行車和全地形自行車的安全條件 | (CYCLES. SAFETY REQUIREMENTS FOR BICYCLES, ALL TERRAIN BIKES AND BICYCLES FOR YOUNG CHILDREN.) |
| NF R32-100 | 自行車.扁銷和輪軸/扁銷/曲柄的總成 | (CYCLES. COTTER PIN AND ASSEMBLY OF THE AXLE/COTTER PIN/CRANK.) |
| NF R32-109 | 自行車腳踏板.調整環.帶螺紋端頭環軸承腳踏板 | (CYCLE CHAIN TRANSMISSION. ADJUSTABLE CONE.) |
| NF R32-110 | 自行車腳踏板.調整環.帶螺紋端頭環軸承腳踏板 | (CYCLE CHAIN TRANSMISSION. ADJUSTABLE CONE LOCKNUT.) |
| NF R32-113 | 自行車.帶方頭配合的腳蹬軸和曲柄.安裝尺寸 | (CYCLES. PEDAL AXLE AND CRANK ASSEMBLY WITH SQUARE END FITTING. ASSEMBLY DIMENSIONS.) |
| NF R32-401 | 自行車單齒飛輪 | (CYCLE FREE WHEEL SPROCKET WITH PLAIN TEETH.) |
| NF R32-402 | 自行車.用于自行車輪轂上裝配飛輪的螺紋 | (Cycles. Screw threads used to assemble freewheels on bicycle hubs.) |
| NF R32-407 | 自行車.帶花鍵輪轂和鏈輪.安裝尺寸 | (Cycles. Splined hub and sprocket. Assembly dimensions.) |
| NF R32-709 | 自行車.輻條螺帽外形尺寸 | (Cycles. External dimensions of spoke nipples.) |
| NF R32-710 | 自行車輪胎 | (CYCLES TYRES.) |
| NF R33-101 | 自行車照明發電機.互換特性 | (LIGHTING GENERATOR FOR CYCLES. INTERCHANGEABILITY CHARACTERISTICS.) |
| NF R33-102 | 自行車照明發電機.在車架上的固定 | (LIGHTING GENERATOR FOR CYCLES. CLAMPING ON THE FRAME.) |
| NF R33-103 | 自行車照明發電機.技術規范和試驗 | (LIGHTING GENERATOR FOR CYCLES. TECHNICAL REQUIREMENTS AND TESTS.) |
| NF R33-601 | 自行車和摩托車用電燈泡 | (ELECTRIC BULBS FOR CYCLES AND MOTOR CYCLES.) |
| NF R34-101 | 自行車.立柱和車把.安裝尺寸 | (Cycles. Stem and handlebar bend. Assembly dimensions.) |
| NF R34-113 | 自行車.柄楔形角 | (CYCLES. STEM WEDGE ANGLE.) |
| NF R34-114 | 自行車.自行車(前后)叉上組裝頭附件用螺紋 | (CYCLES. SCREW THREADS USED TO ASSEMBLE HEAD FITTINGS ON BICYCLE FORKS.) |
| NF R34-303 | 自行車和摩托自行車鈴.技術規范 | (BELLS FOR BICYCLES AND MOPEDS. TECHNICAL SPECIFICATIONS.) |
| NF R38-401 | 自行車.座位桿 | (CYCLES-SEAT PILLAR.) |
| NF R38-402 | 自行車.座 | (CYCLES-SADDLE CLAMP.) |
| NF R38-404 | 自行車.自行車行李架.概念、分類和試驗 | (CYCLES. LUGGAGE CARRIERS FOR BICYCLES. CONCEPTS, CLASSIFICATION AND TESTING.) |
| NF R39-101 | 自行車.底托架組件用螺紋 | (CYCLES. SCREW THREADS USED IN BOTTOM BRACKET ASSEMBLIES.) |
| NF R40-010 | 掛車尺寸符號 | (DIMENSIONAL SYMBOLS OF TRAILERS.) |
| NF R40-011 | 半掛車尺寸符號 | (DIMENSIONAL SYMBOLS OF SEMI-TRAILERS.) |
| NF R40-012 | 道路車輛.牽引車和半掛車、卡車和掛車尺寸符號 | (DIMENSIONAL SYMBOLS OF ROAD TRAINS TRACTOR AND SEMI-TRAILER-TRUCK AND TRAILER.) |
| NF R40-020 | 道路車輛.掛車軸荷重分布.計算方法 | (Road vehicles. Distribution of loads on the axles of trailers. Method of calculation.) |
| NF R40-021 | 道路車輛.半掛車軸荷重分布.計算方法 | (Road vehicles. Distribution of loads on the axles of semi-trailers. Method of calculation.) |
| NF R41-101 | 商用道路車輛.牽引車和拖車間的機械連接件.環形42 mm x 68 mm的拉桿眼用聯接裝置 | (Commercial road vehicles - Mechanical connections between towing vehicles and trailers - Coupling devices for toroidal drawbar eye of 42 mm x 68 mm.) |
| NF R41-102 | 商用道路車輛.牽引車和拖車間的機械連接件.環形42 mm x 68 mm的拉桿眼 | (Commercial road vehicles - Mechanical connections between towing vehicles and trailers - Toroidal drawbar eye of 42 mm x 68 mm.) |
| NF R41-103 | 商業車輛托車用環耦合裝置 | (RING COUPLING FOR COMMERCIAL VEHICLE TRAILERS.) |
| NF R41-105 | 商業車輛托車用環耦合裝置 | (RING COUPLING FOR COMMERCIAL VEHICLE TRAILERS.) |
| NF R41-108 | 道路車輛.旅居車和輕型掛車的偶合球.尺寸 | (Road vehicles. Coupling balls for caravans and light trailers. Dimensions.) |
| NF R41-109 | 旅游拖車和輕型拖車.球形連接器靜負荷 | (CARAVANS AND LIGHT TRAILERS. STATIC LOADS ON THE BALL COUPLINGS.) |
| NF R41-111 | 旅游拖車和輕型拖車的球形連接器 | (BALL COUPLINGS FOR CARAVANS AND LIGHT TRAILERS.) |
| NF R41-117 | 道路運輸車輛.牽引車和掛車之間的機械連結.40mm的牽引裝置 | (COMMERCIAL ROAD VEHICLES. MECHANICAL CONNECTIONS BETWEEN TOWING VEHICLES AND TRAILERS. 40 MM DRAWBAR COUPLING.) |
| NF R41-118 | 道路運輸車輛.牽引車和掛車之間的機械連結.50mm的牽引裝置 | (COMMERCIAL ROAD VEHICLES. MECHINAL CONNECTIONS BETWEE, TOWING VEHICLES. MECHANICAL CONNECTIONS BETWEEN TOWING VEHICLES AND TRAILERS. 50 MM DRAWBAR COUPLING.) |
| NF R41-150 | 托車和半托車.空氣壓力制動連接 | (TRAILERS AND SEMI-TRAILERS.AIR-PRESSURE BRAKING CONNECTIONS.) |
| NF R41-166 | 道路車輛.半掛車50毫米連接銷.基本尺寸和安裝與互換特性 | (Road vehicles. 50 semi-trailer fifth wheel coupling pin. Basic and mounting interchangeability dimensions.) |
| NF R41-171 | 道路車輛.牽引座.可互換性 | (Road vehicles - Fifth wheels - Interchangeability.) |
| NF R41-172 | 公路運輸車輛.第五輪連接器.強度試驗 | (Commercial road vehicles - Fifth wheel couplings - Strength tests.) |
| NF R41-173 | 道路車輛.第五輪中樞銷.強度試驗 | (Road vehicles - Fifth wheel kingpins - Strength test.) |
| NF R41-202 | 自行車和摩托車掛車球形連接裝置 | (BALL COUPLING FOR CYCLE AND MOTORCYCLE TRAILERS.) |
| NF R42-602 | 道路車輛.用惰性制動控制的旅行掛車和輕型掛車.力的計算 | (Road vehicles. Caravans and light trailers. Control device for inertia braking. Calculation of forces.) |
| NF R42-608 | 旅居車和輕便掛車.具有超速制動器的01和02類掛車.制動器的慣性實驗室試驗方法 | (Caravans and light trailers. Trailers of categorie 01 and 02 with overrun brakes. Inertia bench test methods for brakes.) |
| NF R42-609 | 旅居車和輕型掛車.帶超速制動器的01和02類掛車.制動控制用的線性實驗室試驗方法 | (CARAVANS AND LIGHT TRAILERS. TRAILERS OF CATEGORIES O1 AND O2 WITH OVERRUN BRAKES. LINEAR BENCH TEST METHODS FOR BRAKE CONTROLS.) |
| NF R43-406 | 道路車輛.用24V系統的拖和被拖車輛之間的電氣連接.7桿連接件型24V | (Road vehicles. Electrical connections between towing and towed vehicles with 24 V systems. 7 pole connector type 24 N (normal).) |
| NF R43-407 | 道路車輛.有6-12V電氣的牽引車輛和拖掛車之間的連接裝置.12N標準型7極連接器 | (Road vehicles. Electrical connections between towing and towed vehicles with 12 V systems. 7 pole connector type 12 N (normal).) |
| NF R43-409 | 道路車輛.24V電氣設備的牽引車輛和掛車之間的電氣連接裝置.24S(附加)型7極電連接器 | (Road vehicles. Electrical connections between towing and towed vehicles with 24 V systems. 7 pole connector type 24 S (supplementary).) |
| NF R43-410 | 道路車輛.12V電氣設備的牽引車輛和掛車之間的電氣連接裝置.12S型(附加型)7極電連接器 | (Road vehicles. Electrical connections between towing and towed vehicles with 12 V systems. 7 pole connector type 12 S (supplementary).) |
| NF R43-411 | 道路車輛.牽引車和掛車的電連接器.試驗方法和性能要求 | (Road vehicles - Connectors for electrical connections between towing vehicles and trailers - Test methods and performance requirements.) |
| NF R43-411/A1 | 道路車輛.牽引車和掛車間電連接用連接器.試驗方法和性能要求 | (Road vehicles - Connectors for electrical connections between towing vehicles and trailers - Test methods and performance requirements.) |
| NF R43-412 | 乘用車和具有12伏電壓系統的輕工業用車. 在牽引車和掛車之間的13桿連接器的尺寸和觸點的分配 | (Passenger cars and light commercial vehicles with 12 V systems - 13-pole connectors between towing vehicles and trailers - Dimensions and contact allocation.) |
| NF R43-413 | 24V系統商用車輛.牽引車和拖車間的15桿連接器.尺寸和接觸定位 | (COMMERCIAL VEHICLES WITH 24 V SYSTEMS. 15-POLES CONNECTORS BETWEEN TOWING VEHICLES AND TRAILERS. DIMENSIONS AND CONTACT ALLOCATION.) |
| NF R47-101 | 帶翻斗掛車的液壓耦合器 | (Hydraulic coupling for trailer vehicles equipped with dumping bodies.) |
| NF R47-102 | 半掛車支架.功能特性 | (Road vehicles. Legs for semi-trailers. Functional characteristics.) |
| NF R50-101-1 | 電車安全的特殊要求.能量儲存板 | (ELECTRICALLY PROPELLED ROAD VEHICLES. SPECIFIC REQUIREMENTS FOR SAFETY. PART 1 : ON BOARD ENERGY STORAGE. (EUROPEAN STANDARD EN 1987-1).) |
| NF R50-101-2 | 電車安全的特殊要求.性能安全措施和預防失敗 | (ELECTRICALLY PROPELLED ROAD VEHICLES. SPECIFIC REQUIREMENTS FOR SAFETY. PART 2 : FUNCTIONAL SAFETY MEANS AND PROTECTION AGAINST FAILURES. (EUROPEAN STANDARD EN 1987-2).) |
| NF R50-101-3 | 電車安全的特殊要求.電傷害的防護 | (ELECTRICALLY PROPELLED ROAD VEHICLES. SPECIFIC REQUIREMENTS FOR SAFETY. PART 3 : PROTECTION OF USERS AGAINST ELECTRICAL HAZARDS. (EUROPEAN STANDARD EN 1987-3).) |
| NF R50-701 | 電氣推動道路車輛.術語 | (Electrically propelled road vehicles - Terminology.) |
| NF R52-011 | 電驅動道路車輛.道路使用能力的測量.第1部分:純電動車輛(歐洲標準EN 1821-1) | (ELECTRICALLY PROPELLED ROAD VEHICLES. MEASUREMENT OF ROAD OPERATING ABILITY. PART 1 : PURE ELECTRIC VEHICLES. (EUROPEAN STANDARD EN 1821-1).) |
| NF R52-021 | 電驅動道路車輛.能量性能的測量.第1部分:純電動車輛 | (ELECTRICALLY PROPELLED ROAD VEHICLES. MEASUREMENT OF ENERGY PERFORMANCES. PART 1 : PURE ELECTRIC VEHICLES. (EUROPEAN STANDARD EN 1986-1).) |
| NF R52-111 | 電驅動道路車輛.道路使用能力的測量.第2部分:熱電混合車輛 | (ELECTRICALLY PROPELLED ROAD VEHICLES. MEASUREMENT OF ROAD OPERATING ABILITY. PART 2 : THERMAL ELECTRIC HYBRID VEHICLES. (EUROPEAN STANDARD EN 1821-2).) |
| NF R52-121 | 電氣推動道路車輛.能效測量.第2部分:熱電復式動力車 | (Electrically propelled road vehicles - Measurement of energy performances - Part 2 : thermal electric hybrid vehicles.) |
| NF R52-131 | 電氣推動道路車輛.復式動力車的排放測量.第1部分:熱電復式動力車 | (Electrically propelled road vehicles - Measurement of emissions of hybrid vehicles - Part 1 : thermal electric hybrid vehicles.) |
| NF R57-301 | 電動道路車輛.車輛荷載運行期間產生的噪聲.聲級測定 | (Electrically propelled road vehicles - Airborne acoustical noise of vehicle during charging with on-board chargers - Determination of sound power level.) |
| NF R61-301 | 自行車用六角螺母和板手 | (HEXAGONAL NUTS AND SPANNERS FOR CYCLES.) |
| NF R61-701 | 汽車設備用鉸車 | (WINCHES FOR MOTOR VEHICLE EQUIPMENT.) |
| NF R63-101 | 車輛升降機(歐洲標準EN 1493) | (Vehicle lifts.) |
| NF R63-201 | 道路車輛.汽車車庫工具.測量和檢驗工具 | (ROAD VEHICLES. GARAGE EQUIPMENT. ENGINE TESTING AND MEASURING EQUIPMENT.) |
| NF R63-202 | 道路車輛.汽車車庫工具.發動機RPM轉速計.總規范 | (Road vehicles - Garage equipment - Engine RPM tachometer - General specifications.) |
| NF R63-301 | 道路車輛.汽車車庫工具.推進裝置幾何測量設備 | (ROAD VEHICLES. GARAGE EQUIPMENT. GEOMETRY CONTROL DEVICES FOR RUNNING GEAR.) |
| NF R63-302 | 壓力儀表.摩托車輪胎壓力和/或膨脹率用檢查儀器 | (Pressure gauges. Apparatus for inspection of pressure and/or inflation of tyres for motor vehicles. Metrology, requirements and testing.) |
| NF R63-304 | 道路車輛.汽車車庫工具.轉動平臺 | (ROAD VEHICLES. GARAGE EQUIPMENT. SWIVEL-PLATE.) |
| NF R63-703 | 道路車輛.車庫工具.步數計 | (ROAD VEHICLES. GARAGE EQUIPMENT. PEDOMETERS.) |
| NF R63-705 | 道路車輛.汽車車庫工具.自錄式減速計 | (ROAD VEHICLES. GARAGE EQUIPMENT. RECORDING DECELEROMETERS.) |
| NF R63-801 | 道路車輛.汽車車庫工具.照明燈校正設備 | (ROAD VEHICLES. GARAGE EQUIPMENT. EQUIPMENT FOR CHECKING AND ADJUSTING LIGHTS.) |
| NF R81-303 | 帶皮軟微孔塑料.汽車制造用耐磨強度 | (FLEXIBLE CELLULAR PLASTICS WTIH SKIN. RESISTANCE TO RUBBING FOR AUTOMOBILE CONSTRUCTION.) |
| NF R81-304 | 帶皮軟微孔塑料.汽車制造試驗用樣塊 | (FLEXIBLE CELLULAR PLASTICS WITH SKIN. SAMPLE BLOCK FOR TEST PURPOSES FOR AUTOMOBILE CONSTRUCTION.) |
| NF R81-305 | 帶皮軟微孔塑料.人造光（氙燈）下汽車制造用塑料皮老化試驗 | (FLEXIBLE CELLULAR PLASTICS WITH SKIN. SKIN AGEING TEST UNDER ARTIFICIAL LIGHT (XENON LAMPS) FOR AUTOMOBILE CONSTRUCTION.) |
| NF R83-101 | 硬塑料.用汽車制造中的噴丸處理測定耐磨強度 | (RIGID PLASTICS. RESISTANCE TO WEAR BY SHOT-BLASTING FOR AUTOMOBILE CONSTRUCTION.) |
| NF R93-911 | 汽車制造膨脹塞 | (EXPANSIBLE CAPS FOR AUTOMOBILE CONSTRUCTION.) |
| NF R94-301 | 道路車輛.帶O型密封圈的螺紋連接尺寸特征 | (ROAD VEHICLES. THREADING CONNECTION FOR COMPONENTS INCLUDING AN “0“ RING. DIMENSIONAL CHARACTERISTICS.) |
| NF R99-210 | 道路車輛.壓制橡膠混料.分類.符號.特性 | (ROAD VEHICLES. COMPACT RUBBER BASED COMPOUNDS. CLASSIFICATION. SYMBOLIZATION. CHARACTERISTICS.) |
| NF S27-014 | 電影攝影.為汽車上觀眾露天放映的場地 | (Cinematography. Film projection areas for drive-in movies.) |
| NF S30-292 | 聲學.由內陸,水路,港口車輛發出的氣載噪音的測量 | (Acoustics - Measurement of airbone sound emitted by vessels on inland waterways and harbours.) |
| NF S31-019 | 聲學.測量有軌環行車輛發出噪音試驗規則 | (Acoustics. Measurement of noise emitted by railbound vehicles.) |
| NF S31-028 | 聲學.有軌環行車輛內噪音測定 | (Acoustics. Measurement of noise inside railbound vehicles.) |
| NF S31-059 | 聲學.導管發出噪音測量試驗規范（車削工藝） | (Acoustics. Test code for the measurement of noise emitted by bar guide tubes (screw cutting industry).) |
| NF S31-150 | 聲學.機動腳踏兩用車噪音的測定.鑒定法 | (ACOUSTICS. MEASUREMENT OF NOISE EMITTED BY TWO-WHEELED MOPEDS IN MOTION. ENGINEERING METHOD.) |
| NF S31-600-3 | 聲學.低噪音車間(含機械噪音)設計的推薦實施規范.第3部分:工作室中的噪音降低和聲音傳播 | (Acoustics. Recommended practice for the design of low-noise workplaces containing machinery. Part 3 : sound propagation and noise prediction in workrooms.) |
| NF S52-002 | 小型賽車比賽.租借小型賽車.安全要求 | (Karting - Hire karts - Safety requirements.) |
| NF S52-329-6 | 固定訓練設備.第6部分:腳踏車、附加特殊安全要求和試驗方法 | (Stationary training equipment - Part 6 : treadmills, additional specific safety requirements and test methods.) |
| NF S52-802 | 敞篷車用帆布蓬.安全要求 | (Caravan awnings - Safety requirements.) |
| NF S52-803 | 敞篷車篷帆.功能要求和試驗方法 | (Caravan awnings - Fonctional requirements and test methods.) |
| NF S54-001 | 兒童用品.輪式兒童車輛.安全要求和試驗方法 | (Child care articles - Wheeled child conveyances - Safety requirements and test methods.) |
| NF S54-008 | 兒童保育用品.嬰兒步行車..安全要求和實驗方法 | (Child care articles - Baby walking frames - Safety requirements and test methods.) |
| NF S54-201-4/A1 | 游樂場地設備.第4部分:纜車索道的附加特殊安全要求和試驗方法 | (Playground equipment - Part 4 : additional specific safety requirements and test methods for runways.) |
| NF S56-050 | 修閑度假用旅游房車.術語和定義 | (Leisure accomodation vehicles - Terms and definitions.) |
| NF S56-101 | 旅游掛車.車頸用軌道斷面 | (CARAVANS. PROFILE OF CANOPY RAIL.) |
| NF S56-102 | 旅居車輛.旅游掛車.第2部分:使用者的有效負載 | (Leisure accommodation vehicles. Caravans. Part 2 : user payloads.) |
| NF S56-103 | 旅居車輛.帶篷汽車.第2部分:使用者的有效負載 | (Leisure accommodation vehicles. Motor caravans. Part 2 : user payloads.) |
| NF S56-110 | 旅游食宿車.旅居掛車.第1部分:住所的衛生和安全要求 | (Leisure accommodation vehicles. Caravans. Part 1 : habitation requirements relating to health and safety.) |
| NF S56-110/A1 | 旅游食宿車.旅居掛車.第1部分:住所的衛生和安全要求 | (Leisure accommodation vehicles - Caravans - Part 1 : habitation requirements relating to health and safety.) |
| NF S56-111 | 旅游食宿車.旅居車.第1部分:住所的衛生和安全要求 | (Leisure accommodation vehicles. Motor caravans. Part 1 : habitation requirements relating to health and safety.) |
| NF S56-111/A1 | 旅游食宿車.旅居車.第1部分:住所的衛生和安全要求 | (Leisure accommodation vehicles - Motor caravans - Part 1 : habitation requirements relating to health and safety.) |
| NF S56-112 | 旅游食宿車.家庭渡假旅居掛車.住所的衛生和安全要求 | (Leisure accommodation vehicles. Caravan holiday homes. Habitation requirements relating to health and safety.) |
| NF S56-112/A1 | 休閑住宿車輛.假期家用旅居掛車.與健康和安全有關的居住要求 | (Leisure accommodation vehicles - Caravan holiday homes - Habitation requirements relating to health and safety.) |
| NF S56-112/A2 | 旅游食宿車.家庭渡假旅居掛車.住所的衛生和安全要求 | (Leisure accommodation vehicles - Caravan holiday homes - Habitation requirements relating to health and safety.) |
| NF S56-201 | 旅游掛車和機動旅游車的電氣安裝 | (Electrical installation in caravans and motor caravans.) |
| NF S56-202 | 旅游車輛.12V直流超低壓電氣裝置.第1部分:旅游掛車 | (Leisure accomodation vehicles. 12 V direct current extra low voltage electrical installations. Part 1 : caravans.) |
| NF S56-203 | 旅游車輛.12V直流超低壓電氣裝置.第2部分:機動旅游車 | (Leisure accomodation vehicles. 12 V direct current extra low voltage electrical installations. Part 2 : motor caravans.) |
| NF S56-300 | 旅游掛車.不拆卸的基本技術檢驗 | (CARAVANS. ELEMENTARY TECHNICAL INSPECTION WITHOUT DISMANTING.) |
| NF S56-320 | 休閑提供食宿車輛.安全通風要求 | (Leisure accomodation vehicles. Safety ventilation requirements.) |
| NF S56-321 | 旅居車.液體燃料供暖系統.第1部分:旅居掛車和活動房(度假用大篷車) | (Leisure accommodation vehicles. Liquid fuel heating systems. Part 1 : caravans and mobile homes (caravan holiday homes).) |
| NF S61-116 | 消防水龍帶.泵和水車用半硬度輸水軟管和軟管組合件 | (Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles.) |
| NF S61-509-1 | 消防與救援設施車輛.第1部分:術語和名稱與符號 | (Firefighting and rescue service vehicles. Part 1 : nomenclature and designation.) |
| NF S61-509-2 | 消防和援救用車輛.第2部分:通用要求.安全和性能 | (Firefighting and rescue service vehicles - Part 2 : Common requirements - Safety and performance.) |
| NF S61-522 | 消防車用轉動絞盤 | (Rotary hose reels with axial feed for fire fighting vehicles.) |
| NF S61-523 | 消防設備.救護汽車和消防汽車.高功率消防絞盤 | (FIRE FIGHTING EQUIPMENT. FIRE FIGHTING AND RESCUE SERVICE MOTOR VEHICLES. HIGH POWER HOSE REELING VEHICLES.) |
| NF S61-530 | 救護車與消防車.窒息和受傷用救護車 | (FIRE FIGHTING AND RESCUE SERVICE VEHICLES. RESCUE EMERGENCY VEHICLES TO VICTIMS SUFFERING FROM ASPHYXIA AND INJURIES.) |
| NF S61-550 | 救護車和消防車.自動升降設備 | (Fire fighting and rescue service vehicle. Mobile lifting equipment.) |
| NF S62-202 | 大型車庫中噴水式固定自動滅火器 | (FIXED AUTOMATIC FIRE FIGHTING SYSTEM USING ATOMIZED WATER IN LARGE GARAGES.) |
| NF S62-221 | 固定消防設備.灑水車和噴水系統元件.第1部分:灑水車 | (Fixed firefighting systems - Components for sprinkler and water spray systems - Part 1 : sprinklers.) |
| NF S64-021 | 救護.救護器材.急診和復診救護車.窒息和受傷用急救車 | (RESCUE EQUIPMENT. EMERGENCY AMBULANCES. VEHICLES EQUIPPED TO GIVE FIRST AID TO VICTIMS SUFFERING FROM ASPHYXIA AND INJURIES.) |
| NF S64-021/A1 | 醫療車輛及其設備.道路救護車 | (Medical vehicles and their equipment - Road ambulances.) |
| NF S72-305 | 摩托車,機動自行車駕駛員用安全帽(包括修改件A1:1997) | (PROTECTIVE HELMETS FOR MOTORCYCLE, MOPED AND MOTORIZED BIKE USERS. (INCLUDES AMENDMENT A1:1997).) |
| NF S72-403 | 滑冰和滑旱冰人及騎車人用安全帽(歐洲標準EN 1078) | (Helmets for pedal cyclists and for users of skateboards and roller skates.) |
| NF S72-422 | 摩托雪橇和二橇拖材車的駕駛者和乘客用防護性頭盔 | (Protective helmets for drivers and passengers of snowmobiles and bobsleighs.) |
| NF S73-507 | 專業摩托車駕駛者用防護鞋類.要求和試驗方法 | (Protective footwear for professional motorcycle riders - Requirements and test methods.) |
| NF S74-538-1 | 摩托車駕駛員抗機械沖擊用防護服.第1部分:沖擊防護裝置的要求和試驗方法 | (Motorcyclists` protective clothing against mechanical impact. Part 1 : requirements and test methods for impact protectors.) |
| NF S74-542 | 賽車手防護服.防熱和防火.性能要求和試驗方法 | (Protective clothing for automobile racing drivers. Protection against heat and flame. Performance requirements and test methods.) |
| NF S74-542/A1 | 汽車賽手防護服.熱和火焰防護.性能要求和試驗方法.修改件 1:改進的彎曲試驗 | (Protective clothing for automobile racing drivers - Protection against heat and flame - Performance requirements and test methods - Amendment 1 : modified flexion test.) |
| NF S74-549-1 | 職業摩托車騎者用防護服.短外衣、長褲子、連體或分體套裝.第1部分:一般要求 | (Protective clothing for professional motorcycle riders - Jackets, trousers and one-piece or divided suits - Part 1 : general requirements.) |
| NF S74-549-2 | 職業摩托車騎者用防護服.短上衣、長褲和連體或分體套裝.第2部分:耐沖擊摩擦性的試驗方法 | (Protective clothing for professional motorcycle riders - Jackets, trousers and one-piece or divided suits - Part 2 : test method for determination of impact abrasion resistance.) |
| NF S74-549-3 | 專業摩托車駕駛者用防護服裝.夾克、長褲、單件或套服.第3部分:撕裂強度測定的試驗方法 | (Protective clothing for professional motorcycle riders - Jackets, trousers and one-piece or divided suits - Part 3 : test method for determination of burst strength.) |
| NF S74-549-4 | 專業摩托車駕駛者用防護服裝.夾克、長褲、單件或套服.第4部分:沖擊切割阻力測定的試驗方法 | (Protective clothing for professional motorcycles riders - Jackets, trousers and one-piece or divided suits - Part 4 : test method for determination of impact cut resistance.) |
| NF S75-510 | 職業摩托車騎者用防護手套.要求和試驗方法 | (Protective gloves for professional motorcycle riders - Requirements and test methods.) |
| NF S77-117 | 個人眼睛保護.機動腳踏車和摩托車駕駛者護目鏡.(歐洲標準EN 1938) | (Personal eye protection. Goggles for motorcycle and moped users.) |
| NF S77-121 | 人員眼睛的保護.雪地汽車使用者的眼睛保護設備 | (Personal eye-protection - Eye protectors for snowmobile users.) |
| NF S90-605 | 殘疾人用車和輪椅.試驗設備 | (Vehicles and wheelchairs for the handicapped. Test device.) |
| NF S90-606 | 輪椅.第3部分:剎車效果的測定 | (Wheelchairs. Part 3 : determination of effiency of brakes.) |
| NF S95-201 | 道路救護車中使用的擔架和其他運輸病人設備的規范 | (Specifications for stretchers and other patient handling equipment used in road ambulances.) |
| NF S95-202 | 航空、水域和復雜地形用救護車.第1部分:連續救護患者用醫療器械接口要求 | (Air, water and difficult terrain ambulances. Part 1 : medical device interface requirements for the continuity of patient care.) |
| NF S95-203 | 航空、水域和復雜地形用救護車.第2部分:連續救護患者的操作和技術要求 | (Air, water and difficult terrain ambulances. Part 2 : operational and technical requirements for continuity of patient care.) |
| NF S96-103 | 電動輪椅、小型摩托車及其充電器.要求和試驗方法 | (Electrically powered wheelchairs, scooters, and their chargers. Requirements and test methods.) |
| NF T47-266 | 加油車運輸用橡膠軟管和軟管組件.規范 | (RUBBER HOSES AND HOSE ASSEMBLIES FOR FUEL TRUCK DELIVERY. SPECIFICATION. (EUROPEAN STANDARD EN 1761).) |
| NF T60-189 | 潤滑脂.車輪軸承脂的滲漏趨勢 | (LUBRICATING GREASES. LEAKAGE TENDENCIES OF AUTOMOTIVE WHEEL BEARING GREASES.) |
| NF T73-102 | 表面活性劑.車間洗手帶溶劑洗滌劑.規范.試驗 | (Surface active agents. Industrial detergents containing solvent for washing hands. Specifications. Tests.) |
| NF T81-002 | 運輸車輛.罐車.術語 | (TRANSPORT EQUIPMENT. LORRIES. TERMINOLOGY.) |
| NF T81-004 | 運輸車輛.液體罐車.裝滿或防溢裝置.有關表格和規定 | (TRANSPORT EQUIPMENT. TANK FOR LIQUID PRODUCTS. FILLING AND OVERFLOW CONTROL DEVICE. FASTENING AND CORRESPONDENCE TABLE.) |
| NF T81-103 | 液態體化學產品的運輸和裝卸.底部注入或排放的罐車.內部關閉閥和安全閥.使用壓力等于或小于４巴 | (TRANSPORTATION AND HANDLING OF LIQUID CHEMICAL PRODUCTS. TANKER VEHICLES FILLED AND EMPTIED FROM BELOW. INTERNAL SAFETY AND STOP VALVE. OPERATING PRESSURE EQUAL TO OR LESS THAN 4 BAR.) |
| NF T81-104 | 液態體化學產品的運輸和裝卸.底部注入或排放的罐車.４－４０bar工作壓力用標準尺寸ＤＮ８０和ＤＮ１００的 | (TRANSPORTATION AND HANDLING OF LIQUEFIED GASES. TANKER VEHICULES FILLED AND EMPTIED FROM BELOW. INTERNAL SAFETY GATES DN 80 AND DN 100 FOR OPERATING PRESSURES BETWEEN 4 BAR AND 40 BAR.) |
| NF T81-106 | 噴霧狀產品的運輸.最大壓力２．５bar氣動排空的道路罐車.接頭 | (TRANSPORTATION OF POWDERY PRODUCTS. ROAD TANKERS WITH PNEUMATIC DISCHARGE UNDER MAXIMUM PRESSURE 2.5 BAR. COUPLING.) |
| NF T81-107 | 運輸與裝卸.道路罐車.操作人員的安全.入口與操作安全 | (Transport and handling - Road tankers - Operators safety - Acces and handling securities.) |
| NF T81-122 | 運輸設備.液態化學產品罐車.油槽 | (TRANSPORTATION EQUIPMENT. ROAD TANKERS FOR LIQUID CHEMICAL PRODUCTS. DRAWING-UP DEPRESSION.) |
| NF T81-123 | 運輸設備.承壓液化氣罐車.測量孔、除氣孔和檢驗孔 | (TRANSPORTATION EQUIPMENT. ROAD TANKERS FOR LIQUIFIED PRESSURE GAS. HOLES FOR GAUGING,DEGASSING AND TESTING.) |
| NF T81-151 | 化學產品的運輸與裝卸.道路罐車.用銷或螺栓固定的閥門用圓蓋 | (TRANSPORTATION AND HANDLING OF CHEMICALS. ROAD TANKERS. CAPS FOR VALVES FIXED BY PINS OR BOLTS.) |
| NF T81-152 | 液態化學產品的運輸與裝卸.罐車.５００和６００圓頂蓋.帶扣釘螺栓的閉鎖裝置 | (TRANSPORT AND HANDLING OF LIQUID CHEMICAL PRODUCTS. ROADS TANKERS. 500 AND 600 DOMCOVER. CLOSING DEVICES WITH CLAMPS.) |
| NF T81-200 | 運輸與裝卸.貨車和罐車.注入和排放的固定裝置.綜合 | (TRANSPORT AND HANDLING-RAIL CARS AND ROAD TANKERS. PERMANENT STATIONS FOR THE LOADING AND UNLOADING. GENERAL.) |
| NF T81-201 | 運輸與裝卸.貨車和罐車.液態化學產品的注入與排放的固定位置 | (TRANSPORT AND HANDLING-RAIL CARS AND ROAD TANKERS. PERMANENT STATIONS FOR THE LOADING AND UNLOADING OF LIQUID CHEMICAL PRODUCTS.) |
| NF T81-202 | 運輸與裝卸.貨車和罐車.液化氣或溶解氣下部壓力注入與排放的固定位置 | (TRANSPORT AND HANDLING. RAIL CARS AND ROAD TANKERS. PERMANENT STATIONS FOR BOTTOM LOADING AND UNLOADING OF PRESSURIZED LIQUEFIED OR DISSOLVED GASES.) |
| NF T81-203 | 有軌貨車和公路罐車的運輸和裝卸.液化氣或溶解氣頂端裝卸的固定位置 | (TRANSPORT AND HANDLING RAIL CARS AND ROAD TANKERS. PERMANENT STATIONS FOR TOP LOADING AND UNLOADING OF PRESSURIZED LIQUEFIED OR DISSOLVED GASES.) |
| NF T81-204 | 運輸與裝卸.貨車和罐車.噴霧狀產品注入與排放的固定位置 | (TRANSPORT AND HANDLING. RAIL CARS AND ROAD TANKERS. PERMANENT STATIONS FOR THE LOADING AND UNLOADING OF PULVERULENT PRODUCTS.) |
| NF U02-052-1 | 高離地間隙拖拉機.傾斜穩定性.翻車時保護.第1部分:穩定性.計算方法 | (High-clearance tractors - Stability on slopes and protection in event of overturning - Part 1 : stability - Calculation methods.) |
| NF U02-052-2 | 高地隙拖拉機.傾斜穩定性.翻車時保護.第2部分:翻車時的保護.計算方法 | (High-clearance tractors - Stability on slopes and protection in event of overturning - Part 2 : protection in event of overturning - Calculation methods.) |
| NF U02-085 | 道路車輛、農業和林業用拖拉機和機械.內部材料抗燃燒特性的測定 | (Road vehicles, and tractors and machinery for agriculture and forestry. Determination of burning behaviour of interior materials.) |
| NF U03-024-1 | 農用拖車和自推動設備.考慮到灰塵和植物健康產品的空氣凈化室的性能.要求和試驗.第1部分:空氣凈化裝置 | (Agricultural tractors and self-propelled equipment - Performance of air purifyied cabs with respect to dust and plant health products - Requirements and tests - Part 1 : air purification devices.) |
| NF U10-211 | 農用拖車.試驗規程.第12部分:低溫起動 | (Agricultural tractors - Test procedures - Part 12 : low temperature starting.) |
| NF U14-022 | 農用半拖車.“B“型牽引環 | (AGRICULTURAL SEMI-TRAILERS. COUPLING-RING TYPE “B“.) |
| NF U14-022-2 | 農用車輛.拖掛車輛的機械連接裝置.第2部分: 帶40座孔的連接環 | (Agricultural vehicles - Mechanical connections on towed vehicles - Part 2 : coupling ring 40 with socket.) |
| NF U14-023 | 農用車輛.拖車的機械連接裝置.第2部分:U型掛鉤型號.尺寸 | (AGRICULTURAL VEHICLES. MECHANICAL CONNECTIONS ON TOWING VEHICLES. PART 2 : CLEVIS TYPE. DIMENSIONS.) |
| NF U14-025 | 農用車輛.牽引車輛的機械連接裝置.第3部分:拖拉機牽引桿 | (AGRICULTURAL VEHICLES. MECHANICAL CONNECTIONS ON TOWING VEHICLE. PART 3 : TRACTOR DRAWBAR.) |
| NF U14-026 | 農用車輛.拖車上的機械連接.第4部分:PIION型.尺寸 | (AGRICULTURAL VEHICLES. MECHNICAL CONNECTIONS ON TOWING VEHICLES. PART 4 : RING-BOLT. SPECIFICATIONS.) |
| NF U14-027 | 農用車輛.牽引車上機械吊鉤式連接件.試驗方法和要求 | (Agricultural vehicles - Mechanical hook-type connections on towing vehicles - Test methods and requirements.) |
| NF U14-028 | 農用車輛.拖掛車和牽引車輛之間的機械連接.第2部分:40 U型鉤規范 | (Agricultural vehicles - Mechanical connections between towed and towing vehicles - Part 2 : specifications for clevis coupling 40.) |
| NF U14-030 | 林業機械.絞車.性能要求 | (Machinery for forestry. Winches. Performance requirements.) |
| NF U14-305 | 林業機具.絞車.分類和名稱 | (Machinery for forestry. Winches. Classification and nomenclature.) |
| NF U16-051 | 農用牽引車制動和制動裝置.實驗室試驗法 | (Trailed agricultural vehicles. Brakes and braking devices. Laboratory test method.) |
| NF U16-101 | 農用拖車.套管筒式單動作抓斗式起重拖車.系列25進氣壓力表(MPa) | (250bar2,3 型.互換尺寸 (AGRICULTURAL TRAILERS. SINGLE-ACTING TELESCOPIC TIPPING CYLINDERS. 25 MPA (250 BAR) SERIES. TYPLES 1,2 AND 3. INTERCHANGEABILITY DIMENSIONS.) |
| NF U16-102 | 農業機械.農用掛車和拖掛設備.牽引桿插孔 | (AGRICULTURAL MACHINERY. AGRICULTURAL TRAILERS AND TRAILED EQUIPMENT. DRAWBAR JACKS.) |
| NF U23-110 | 農用機械.泥漿槽罐車和噴撒裝置.環保.噴撒精度的要求和試驗方法 | (Agricultural machinery - Slurry tankers and spreading devices - Environmental protection - Requirements and test methods for the spreading precision.) |
| NF X05-100 | 圖形符號.架空索道及滑動式人員運輸車的使用標志 | (Graphical symbols - Signs for the use of the ropeways and ski-lifts.) |
| NF X44-060 | 空氣凈化設備.車切螺紋工業用帶整體風扇的油中霉氣的凈化器.試驗方法 | (AIR CLEANING EQUIPMENT. OIL MUST GAS PURIFIERS WITH INTEGRAL FAN FOR SCREW-CUTTING INDUSTRY. TEST METHOD.) |
| NF X50-202 | 道路車輛.特殊用途車輛.適用性能的技術評定 | (ROAD VEHICLES. SECOND HAND PRIVATE CAR. TECHNICAL ASSESSMENT OF SUITABILITY FOR USE.) |
| NF X50-210 | 小排量汽車故障修理.技術規范 | (ACCIDENT REPAIR OF LIGHT VEHICLES. TECHNICAL SPECIFICATIONS.) |
| NF X50-765 | 電信.由無線電電話安裝工程技術人員交付使用的無線電電話和車載服務 | (Telecommunications. Radiotelephone and car. Service delivered by the radiotelephone installation engineers.) |
| NF X50-805 | 運輸.后方勤務和服務站.公共乘客運輸車.服務質量定義,目標和測量 | (Transportation - Logistics and services - Public passenger transport - Service quality definition, targeting and measurement.) |
| NF X50-840 | 旅行修理機構.輕型車輛的旅行修理.服務規范 | (REPAIR-TOURING ACTIVITY. REPAIR-TOURING OF LIGHTWEIGHT VEHICLES. SERVICE SPECIFICATIONS.) |
| NF X50-841 | 旅行修理機構.輕型車輛的旅行修理.設備和方法規范 | (REPAIR-TOWING ACTIVITY. REPAIR-TOWING OF LIGHTWEIGHT VEHICLES. EQUIPMENT AND MEANS SPECIFICATIONS.) |
| NF Z84-761-1 | 電磁兼容性和無線電頻譜管理(ERM).短程裝置.在2.45GHz頻率范圍內運行的鐵路車輛的自動識別.第1部分:技術特 | () |
| XP P99-071-2 | 道路交通信號控制.控制者系列對話規范.車禍用最小側面圖的定義 | (Road traffic signal control - Controller serial dialogue specification - Part 2 : definition of minimal profile DIASER use.) |
| XP X30-415 | 廢品.從自愿的觀點對拒絕回收的車輛中包含的等量的廢物和家庭樣品的組成.選擇性分類家庭廢品部分 | (Waste - Constitution of sample of household and equivalent waste contained in a refuse collection vehicle from voluntary voluntary points - Fraction of selectively sorted household waste.) |
| 編號 | 中文名稱 | 英文名稱 |