微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| NF C01-561 | 電工技術詞匯.第561章:頻率控制與選擇用壓電器件 | (Electrotechnical vocabulary. Chapter 561 : piezoelectric devices for frequency control and selection.) |
| NF C26-226 | 絕緣材料介電強度.試驗方法.第1部分:功率頻率試驗 | (Electrical strength of insulating materials. Test methods. Part 1 : tests at power frequencies.) |
| NF C26-230 | 絕緣材料的試驗方法.測定工頻、音頻和無線電頻率用電絕緣材料介電常數和離散因子的推薦方法 | (Methods of testing insulating materials. Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating material at power, audio and radio freq.) |
| NF C26-231/AM1 | 絕緣材料的試驗方法.絕緣材料在頻率為300MHz以上時的介電特性的推薦測定方法 | (METHODS OF TESTING INSULATING MATERIALS. RECOMMENDED METHODS FOR THE DETERMINATION OF THE DIELECTRIC PROPERTIES OF INSULATING MATERIAL AT FREQUENCIES ABOVE 300 MHZ.) |
| NF C26-231M1 | 絕緣材料的試驗方法.絕緣材料在頻率為300MH2以上時的介電特性的推薦測定方法 | (METHODS OF TESTING INSULATING MATERIALS. RECOMMENDED METHODS FOR THE DETERMINATION OF THE DIELECTRIC PROPERTIES OF INSULATING MATERIAL AT FREQUENCIES ABOVE 300 MHZ.) |
| NF C27-221 | 絕緣液.工業頻率下?lián)舸╇妷旱臏y定.試驗方法 | (Insulating liquids. Determination of the breakdown voltage at power frequency. Test method.) |
| NF C28-911 | 磁性材料.中等頻率下電工鋼片和電工鋼帶的磁性測量的方法 | (Magnetic materials. Methods of measurement of magnetic properties of magnetic steel sheet and strip at medium frequencies.) |
| NF C28-940 | 在中等頻率的薄磁鋼帶 | (Thin magnetic steel strip for use at medium frequencies.) |
| NF C31-888-7 | 超導性.第7部分:電子學特性的測量.微波頻率下超導體的表面電阻 | (Superconductivity - Part 7 : electronic characteristic measurements - Surface resistance of superconductors at microwave frequencies.) |
| NF C42-103 | 直接指示電測儀表其及附件.頻率計用特殊規定 | (Direct acting indicating analogue electrical measuring instruments and their accessories. Part 4 : special requirements for frequency meters.) |
| NF C45-205-6 | 繼電器.第22-6部分:測量繼電器和保護設備的配電試驗.由無線電頻率場感應的抗干擾和傳導分配 | (Electrical relays - Part 22-6 : elctrical disturbances tests for measuring relays and protection equipment - Immunity to conducted disturbances induced by radio frequency fields.) |
| NF C45-205-7 | 電氣繼電器.第22-7部分:測量繼電器和保護裝置的電氣干擾試驗.電源頻率抗擾試驗 | (Electrical relays - Part 22-7 : electrical disturbance tests for measuring relays and protection equipment - Power frequency immunity tests.) |
| NF C46-905-1 | 配電線路載體系統的配電自動化.第5-1部分:低層輪廓.擴展頻率移位鍵控輪廓 | (Distribution automation using distribution line carrier systems - Part 5-1 : lower layer profiles - The spread frequency shift keying (S-FSK) profile.) |
| NF C48-229 | 侵入的檢測.超高頻率的運轉檢測器.特殊標準 | (INTRUSION DETECTION. VERY-HIGH FREQUENCY MOTION DETECTORS. SPECIFIC STANDARD.) |
| NF C63-075 | 低壓工業設備.近距離電感應傳感器.傳感距離和頻率的測定方法 | (LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR FOR INDUSTRIAL USE. INDUCTIVE PROXIMITY SWITCHES. METHODS FOR MEASURING THE OPERATING DISTANCE AND OPERATING FREQUENCY. (EUROPEAN STANDARD EN 50 010).) |
| NF C90-004 | 有線電視的MAC頻率(用MA/BLR表示)的射頻特性.(歐洲標準 EN 50 080) | (RF characteristics of MAC AM-VSB cable receivers.) |
| NF C90-121 | 遠程通信和電子設備.30MHz至1GHz的頻率范圍的無線電廣播和電視廣播接收天線 | (Telecommunication and electronic equipment. Aerials for the reception of sound and television broadcasting in the frequency range 30 MHzto 1 GHz.) |
| NF C90-201-2-1 | 頻率范圍為3KHz至148.5KHz的低壓電氣設備的信號傳輸.第2-1部分:住宅、商業和輕工用工作頻率范圍為95kHz-148 | () |
| NF C90-201-2-2 | 頻率范圍為3KHz至148.5KHz的低壓電氣設備的信號傳輸.第2-2部分:工業環境中使用的工作頻率范圍為95kHz-148.5 | () |
| NF C90-201-2-3 | 頻率范圍由3KHz至148.5KHz的低壓電氣設備的信號傳輸.第2-3部分:電源和配電器使用的工作頻率為3kHz至95kHz的 | () |
| NF C90-201-4-2/A1 | 頻率范圍3kHz到148.5kHz的低壓電氣裝置上的信號傳送.第2部分:低壓去耦濾波器.安全要求. | (Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 2 : low voltage decoupling filters - Safety requirements.) |
| NF C90-201-7 | 頻率范圍3kHz到148.5kHz的低壓電力設備上的信號傳送.第7部分:設備阻抗 | (Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 7 : equipment impedance.) |
| NF C90-352-5 | 數字微波無線電發射系統用設備的測量方法.第2部分:地面無線電中繼系統.第5節:頻率調制器 | (Methods of measurement for radio equipment used in satellite earth sations. Part 2 : measurements for sub-systems. Section five : frequency modulators.) |
| NF C90-352-6 | 衛星地面站用無線電設備的測量方法.第2部分:分系統.第6節:頻率解調器 | (Methods of measurement for radio equipment used in satellite earth stations. Part 2 : measurements for sub-systems. Section 6 : frequency demodulators.) |
| NF C91-004-16 | 電磁兼容性(EMC).第4-16部分:試驗和測量技術.頻率范圍0Hz～150kHz的傳導共模干擾抗擾性試驗 | (Electromagnetic compatibility (EMC). Part 4-16 : testing and measurement techniques. Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz.) |
| NF C91-004-28 | 電磁兼容性(EMC).第4-28部分:試驗和測量技術.電源頻率的變化.抗干擾試驗 | (Electromagnetic compatibility (EMC) - Part 4-28 : testing and measurement techniques - Variation of power frequency, immunity test.) |
| NF C91-004-8 | 電磁兼容性(EMC).第4部分:試驗和測量技術.第8節:電源頻率磁場抗擾試驗.基本電磁兼容性(EMC)出版物 | (Electromagnetic compatibility (emc). Part 4 : testing and measurement techniques. Section 8 : power frequency magnetic field immunity test. Basic EMC publication.) |
| NF C91-004-8/A1 | 電磁兼容性.第4-8部分:試驗和測量技術.電源頻率磁場抗擾性試驗 | (Electromagnetic compatibility (EMC) - Part 4-8 : testing and measurement techniques - Power frequency magnetic field immunity test.) |
| NF C91-011 | 工業,科學和醫學(ISM)無線電頻率設備.無線電干擾特性.測量極限和方法 | (Industrial, scientific and medical (ISM) radio-frequency equipment - Radio disturbance characteristics - Limits and methods of measurement.) |
| NF C93-406-4-105 | 直流低頻率模擬設備和高速數據應用設備用經質量評定的連接器.第4部分:印制電路用連接器.第105節:用途廣泛的 | () |
| NF C93-407-17 | 頻率低于3MHz的連接器.第17部分:可充電電池用可多向插合的互連器件的詳細規范 | (Connectors for frequencies below 3 MHz - Part 17 : detail specification for interconnection devices which permit multi-directional mating, for use with rechargeable batteries.) |
| NF C93-430-1 | 用于印制板的頻率低于3MHZ的連接件.第1部分:一般規范.具有評估質量的數字規范的準備指南和一般要求 | (Connectors for frequencies below 3 MHz for use with printed boards. Part 1 : generic specification. General requirements and guide for the preparation of detail specifications, with assessed quality.) |
| NF C93-430-10 | 用于印制板的頻率低于3MHZ的連接件.第10部分: 2.54MM(0,1IN)基本柵極的印制板兩部分連接件,倒轉型 | (Connectors for frequencies below 3 MHz for use with printed boards. Part 10 : two-part connectors for printed boards for basic grid of 2,54 mm (0,1 in), inverted type.) |
| NF C93-430-12 | 用于印制板的頻率低于3MHZ的連接件.第12部分:尺寸的詳細規范.用于集成電路的插座設計范圍內的試驗和一般要 | (Connectors for frequencies below 3 MHz for use with printed boards. Part 12 : detail specification for dimensions, general requirements and tests for a range of socket designed for use with integrated circuits.) |
| NF C93-430-13 | 用于印制板的頻率低于3MHZ的連接件.第13部分:非達到式絕緣替代終端用自由連接件,2,54(0,1)基本柵極的印制板 | () |
| NF C93-430-14 | 印制板用頻率低于3MHz的連接器.第14部分:音頻、視頻和音像設備用低音頻及視頻圓形連接器詳細規范 | (Connectors for frequencies below 3 MHz for use with printed boards - Part 14 : detail specification for circular connectors for low-frequency audio and video applications such as audio, video and audio-visual equipment.) |
| NF C93-430 | 印制板用頻率低于3MHz的連接器.第7部分:包括具有一般匹配特性固定和非固定連接器的經質量評定的8路連接器詳 | (CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS. PART 7 : DETAIL SPECIFICATION FOR CONNECTORS, 8-WAY, INCLUDING FIXED AND FREE CONNECTORS WITH COMMON MATING FEATURES, WITH ASSESSED QUALITY. (EUROPEAN STANDARD EN 60 603-7).) |
| NF C93-430-2 | 印制板用的頻率低于3MHz的連接器.第2部分:已評定質量的用于印制板的基本柵極點2,54MM(0.1IN)共有固定特性的 | (Connectors for frequencies below 3 MHz for use with printed boards. Part 2 : detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0.1 in) with common mounting features.) |
| NF C93-430-3 | 用于印制板的頻率低于3MHZ的連接件.具有在2,54MM(0,1IN)中心接觸空間和同樣空間的交錯終端的印制板兩部連接 | (Connectors for frequencies below 3 MHz for use with printed boards. Part 3 : two-part connectors for printed boards, having contacts spaced at 2,54 mm (0,1 in) centres and staggered terminations at that same spacing.) |
| NF C93-430-4 | 用于印制板的頻率低于3MHZ的連接件.第4部分:具有在1,91MM(0,075IN)中心接觸空間和同樣空間的交錯終端的印制 | (Connectors for frequencies below 3 MHz for use with printed boards. Part 4 : two-part connectors for printed boards, having contacts spaced at 1,91 mm (0,075 in) centres and staggered terminations at that same spacing.) |
| NF C93-430-5 | 用于印制板的頻率低于3MHZ的連接件.第5部分:2,54MM(0.1IN)空間的雙邊印制板用兩部連接件和邊緣套節連接件 | (Connectors for frequencies below 3 MHz for use with printed boards. Part 5 : edge-socket connectors and two-part connectors for double-sided printed boards with 2,54 mm (0,1 in) spacing.) |
| NF C93-430-6 | 用于印制板的頻率低于3MHZ的連接件.第6部分:具有1,6MM(0,063)常規厚度的單邊或雙邊印制板用2,54MM(0,1IN)接 | (Connectors for frequencies below 3 MHz for use with printed boards. Part 6 : edge-docket connectors and printed-board connectors with 2,54 mm (0,1 in) contact spacing for single or double-sided printed boards of 1,6 mm (0,063 in) nominal thickness.) |
| NF C93-430-7 | 印制板用頻率低于3MHz的連接器.第7部分:經質量評定的包括具有一般匹配特性的固定和活動連接器的8路連接器的 | (Connectors for frequencies below 3 MHz for use with printed boards. Part 7 : detail specification for connectors, 8-way, including fixed and free connectors with common mating features, with assessed quality.) |
| NF C93-430-8 | 用于印制板的頻率低于3MHZ的連接件.第8部分:具有0.63MMx0.63MM平方凸模接觸的2,54MM基本柵極的印制板用兩部 | (Connectors for frequencies below 3 MHz for use with printed boards. Part 8 : two-parts connectors for printed boards, for basic grid of 2,54 mm (0,1 in) with square male contacts of 0,63 mm X 0,63 mm.) |
| NF C93-430-9 | 用于印制板的頻率低于3MHZ的連接件.第9部分:2.54MM(0,1IN)基本柵極,后控板和電纜連接件的印制板用兩部分連 | (Connectors for frequencies below 3 MHz for use with printed boards. Part 9 : two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in).) |
| NF C93-551 | 電子元件.無線電頻率用半硬同軸電纜.一般規定 | (ELECTRONIC COMPONENTS. SEMI RIGID COAXIAL CABLES. GENERAL REQUIREMENTS.) |
| NF C93-560-1 | 無線電頻率連接器.單個,多個系列、雙語種空白詳細規范 | (Radio-frequency connectors. Part 1-1 : single, multi-series, dual-language blank detail specification.) |
| NF C93-584-2-4 | 射頻和同軸電纜部件.第2-4部分:廣播和電視接收機用電纜部件的詳細規范(IEC 60169-2連接器頻率范圍0-3000MHZ | (Radio frequency and coaxial cable assemblies. Part 2-4 : detail specification for cable assemblies for radio and TV receivers (frequency range 0 to 3000 MHz, IEC 60169-2 connectors).) |
| NF C93-584-2-5 | 射頻和同軸電纜組件.第2-5部分:廣播和電視接收機用電纜組件的詳細規范.IEC 60169-2連接器的頻率范圍0-1000M | (Radio frequency and coaxial cable assemblies. Part 2-5 : detail specification for cable assemblies for radio and TV receivers. Frequency range 0 to 1000 MHz, IEC 60169-2 connectors.) |
| NF C93-584-2-6 | 射頻和同軸電纜組件.第2-6部分:廣播和電視接收機用電纜組件的詳細規范.IEC 60169-24連接器的頻率范圍0 | (Radio frequency and coaxial cable assemblies. Part 2-6 : detail specification for cable assemblies for radio and TV receivers. Frequency range 0 to 3000 MHz, IEC 60169-24 connectors.) |
| NF C93-585-3-2 | 無線頻率電纜.第3-2部分:水平地板線數字通信共軸電纜.185M達到10MB/S局域網固體介電共軸電纜詳細規范 | (Radio frequency cables. Part 3-2 : coaxial cables for digital communication in horizontal floor wiring. Detail specification for coaxial cables with solid dielectric for local area network of 185 m reach and up to 10 Mb/s.) |
| NF C93-621 | 用π型網絡的零相位技術測量石英晶體單元參數.第1部分:用π型網絡零相位技術測量石英諧振器的諧振頻率和諧 | (Measurement of quartz crystal unit parameters by zero phase technique in a pi-network - Part 1 : basic method for the measurement of resonance frequency and resonance resistance of quartz crystal unit) |
| NF C93-624 | 用π型網絡的零相位技術測量石英晶體單元的參數.第4部分:石英晶體單元負荷諧振頻率fl、負荷諧振電阻Rl的測 | (頻率小于等于30MHz)() |
| NF C93-628-2 | 頻率控制和選擇用表面安裝的壓電器件.標準外形和終端引線連接.第2部分:陶瓷外殼 | (Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 2 : ceramic enclosures.) |
| NF C93-628-3 | 頻率控制和選擇用表面安裝的壓電器件.標準外形和終端引線連接.第3部分:金屬外殼 | (Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 3 : metal enclosures.) |
| NF C94-566 | 射頻電磁場暴露測量.頻率范圍100KHZ-1GHZ的場強 | (Measurement of exposure to radio-frequency electromagnetic fields. Field strength in the frequency range 100 kHz to 1 GHz.) |
| NF C96-022-12 | 半導體器件.機械和氣候試驗方法.第12部分: 振動、可變頻率 | (Semiconductor devices - Mechanical and climatic test methods - Part 12 : vibration, variable frequency.) |
| NF C96-627-1-3 | 波導型電介諧振器.第1-3部分:一般信息和試驗條件.在微波頻率內電介諧振器材料的復合相關可允許性的測量方法 | (Waveguide type dielectric resonators - Part 1-3 : general information and test conditions - Measurement method of complex relative permittivity for dielectric resonator materials at microwave frequenc) |
| NF C96-628-1 | 頻率控制和選則用表面安裝的壓電器件.標準外形和終端引線的連接.第1部分:塑料模壓外殼外形 | (Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 1 : plastic moulded enclosure outlines.) |
| NF C97-030 | 電聲.電聲儀器頻率響應曲線軌跡圖標度 | (Electro-acoustics. Scales for plotting frequency characteristics ofelectro-acoustic instruments.) |
| NF C97-901 | 用0.5MHz～15MHz頻率的水平掃描技術進行水聽器的絕對校準 | (The absolute calibration of hydrophones using the planar scanning technique in the frequency range 0,5 MHzto 15 MHz.) |
| NF C97-902 | 0.5MHz至15MHz頻率范圍內用水聽器測量和表征超聲場 | (Measurement and characterisation of ultrasonic fields using hydrophones in the frequency range 0.5 MHzto 15 MHz.) |
| NF C97-905 | 頻率范圍:0.5MHz～25MHz的液體超聲功率測定 | (Ultrasonic power measurement in liquids in the frequency range 0,5 MHzto 25 MHz.) |
| NF C97-909 | 超聲波學.0.5MHz～5MHz頻率范圍物理治療系統的性能要求和測量方法 | (Ultrasonics. Physiotherapy systems. Performance requirements and methods of measurement in the frequency range 0,5 MHz to 5 MHz.) |
| NF C99-102 | 評估人體暴露于電子粒子監測器(EAS)、無線電頻率識別(RFID)及類似設備中使用裝置的電磁場 | (Evaluation of human exposure to electromagnetic fields from devices used in Electronic Article Surveillance (EAS), Radio Frequency Identification (RFID) and similar applications.) |
| NF C99-103 | 與人體暴露在無線電站和頻率:110 MHz～40 GHz的無線遠程通信系統的電磁場強度和SAR相關的計算和測量用基本 | (Basic standard for the calculation and measurement of electromagnetic field strength and SAR related to human exposure from radio base stations and fixed terminal stations for wireless telecommunicati) |
| NF C99-110 | 對電子粒子監視(EAS)、射頻識別(RFID)和類似應用的運作頻率范圍0Hz～10 GHz的裝置產生的電磁場,人們受其輻 | (Limitation of human exposure to electromagnetic fields from devices operating in the frequency range 0 Hz to 10 GHz, used in Electronic Article Surveillance (EAS), Radio Frequency Identification (RFID) |
| NF E90-300 | 旋轉頻率在１０－２００轉／秒時的機器的機械振動.評定標準制定的基準 | (MECHANICAL VIBRATION OF MACHINES WITH ROTATIONAL FREQUENCIES FROM 10 S-1 TO 200 S-1. BASIS FOR SPECIFYING EVALUATION STANDARDS.) |
| NF E90-301 | 旋轉頻率在１０－２００轉／秒時的機器的機械振動.現場振動強度的測定和評定 | (MECHANICAL VIBRATION OF LARGE ROTATING MACHINES WITH ROTATIONAL FREQUENCIES FROM 10 S-1 TO 200 S-1. MEASUREMENT AND EVALUATION OF VIBRATION SEVERITY IN SITU.) |
| NF F07-024 | 鐵路固定設備和車輛.電磁干攏.鐵路信號和電信電纜50H2頻率的屏蔽系數的確定和測量 | (RAILWAY FIXED EQUIPMENT AND ROLLING STOCK. ELECTROMAGNETIC DISTURBANCES. DETERMINATION AND MEASUREMENT OF SCREENING FACTOR WITH A FREQUENCY OF 50 HZ OF RAILWAY SIGNALLING AND TELECOMMUNICATION CABLES.) |
| NF H00-043 | 包裝.滿裝運輸包裝件和成組裝運.固定低頻率振動試驗 | (Packaging - Complete, filled transport packages and unit loads - Vibration tests at fixed low frequency.) |
| NF M08-016 | 石油和液態石油產品.計量用密度的測量.振蕩頻率法 | (PETROLEUM AND LIQUID PETROLEUM PRODUCTS. DETERMINATION OF DENSITY FOR METROLOGICAL PURPOSES. OSCILLATION FREQUENCE METHOD.) |
| NF S30-007-5 | 聲學.測聽設備校準用參照區.第5部分:8kHz至16kHz頻率范圍內純音的參考等效閾聲壓級 | (Acoustics - Reference zero for the calibration of audiometric equipment - Part 5 : reference equivalent threshold sound pressure levels for pure tones in the frequency range 8 kHz to 16 kHz.) |
| NF Z64-700 | 信息處理.在２００mm（８in）軟磁盤上利用２個頻率以１３，２６２ｆｔｐｒａｄ錄制在一面的信息交換.尺寸特 | (INFORMATION PROCESSING. DATA INTERCHANGE ON 200 MM (8 IN) FLEXIBLE DISK CARTRIDGES USING TWO-FREQUENCY RECORDING AT 13262 FTPRAD ON ONE SIDE. DIMENSIONAL,PHYSICAL AND MAGNETIC CHARACTERISTICS.) |
| NF Z64-701 | 信息處理.在２００mm（８in）軟磁盤上利用２個頻率以１３，２６２ｆｔｐｒａｄ錄制在一面的信息交換.磁道示 | (INFORMATION PROCESSING. DATA INTERCHANGE ON 200 MM (8 IN) FLEXIBLE DISK CARTRIDGES USING TWO-FREQUENCY RECORDING AT 13 262 FTPRAD ON ONE SIDE. TRACK FORMAT.) |
| NF Z64-705 | 信息處理.在２００mm（８in）軟磁盤上利用修正的頻率調制以１３，２６２ｆｔｐｒａｄ錄制在兩面上的信息交 | (INFORMATION PROCESSING. DATA INTERCHANGE ON 200 MM (8 IN) FLEXIBLE DISK CARTRIDGE USING MODIFIED FREQUENCY MODULATION RECORDING AT 13262 FTPRAD ON TWO SIDES. DIMENSIONAL,PHYSICAL AND MAGNETIC CHARACTERISTICS.) |
| NF Z64-706 | 信息處理.在２００mm（８in）軟磁盤上利用修正的頻率調制以１３，２６２ｆｔｐｒａｄ，１９ｔｐｍｍ（４８ | (INFORMATION PROCESSING. DATA INTERCHANGE ON 200 MM (8 MM) FLEXIBLE DISK CARTRIDGE USING MODIFIED FREQUENCY MODULATION RECORDING AT 13262 FTPRAD,1,9 TPMM (48 TPI),ON BOTH SIDES. PART 2 : TRACK FORMAT.) |
| NF Z64-721 | 信息技術.在１３０mm（５．２５in）軟磁盤上利用修正的頻率調制以７９５８ｆｔｐｒａｄ１．９ｔｐｍｍ（４ | () |
| NF Z64-722 | 信息處理.在１３０mm（５．２５in）軟磁盤上利用修正的頻率 調制以７，９５８ｆｔｐｒａｄ１．９ｔｐｍｍ（ | (INFORMATION PROCESSING. DATA INTERCHANGE ON 130 MM (5.25 IN) FLEXIBLE DISK CARTRIDGES USING MODIFIED FREQUENCY MODULATION RECORDING AT 7 958 FTPRAD,1.9 TPMM (48 TPI),ON BOTH SIDES. PART 2 : TRACK FORMAT A. (EUROPEAN STANDARD EN 27487-2).) |
| NF Z64-771 | 信息處理.使用調頻率以13262FTPRAD在每面80磁道上調制錄制的130mm(5.25in)盒式軟磁盤上的數據交換.第1部分: | () |
| NF Z64-772 | 信息處理.以限定的頻率13262次磁通變換/弧度在每側80列磁道上調制錄制的130mm(5.25in)盒式軟磁盤的數據交換 | (INFORMATION PROCESSING. DATA INTERCHANGE ON 130 MM (5,25 IN) FLEXIBLE DISK CARTRIDGES USING MODIFIED FREQUENCY MODULATION RECORDING AT 13 262 FTPRAD, ON 80 TRACKS EACKS EACH SIDE. PART 2 : TRACK FORMAT A FOR 77 TRACKS. (EUROPEAN STANDARD EN 28630-2).) |
| NF Z64-773 | 信息處理.以限定的頻率13262次磁通變換/弧度在每側80列磁道上調制錄制的130mm(5.25in)盒式軟磁盤的數據交換 | (INFORMATION PROCESSING. DATA INTERCHANGE ON 130 MM (5,25 IN) FLEXIBLE DISK CARTRIDGES USING MODIFIED FREQUENCY MODULATION RECORDING AT 13 262 FTPRAD, ON 80 TRACKS EACH SIDE. PART 3: TRACK FORMAT B FOR 80 TRACKS. (EUROPEAN STANDARD EN 28630-3).) |
| NF Z84-446 | 無線電設備和系統(RES).在頻率譜帶為864,1MHZ到868-1MHZ內操作的第2代無繩電話裝置(CT2)的電磁兼容性(EMC) | (Radio Equipment and Systems (RES). ElectroMagnetic Compatibility (EMC) standard for second generation Cordless Telephone (CT2) apparatus operating in the frequency band 864,1 MHz to 868-1 MHz, including public access services.) |
| NF Z84-489-3 | 電磁兼容性和無線電頻譜管理(ERM).無線電設備的電磁兼容性標準.第3部分:使用頻率在9kHz-40GHz間短程設備的 | (Electromagnetic compatibility and radio spectrum matters (ERM) - Electromagnetic compatibility (EMC) standard for radio equipment and services - Part 3 : specific conditions for short-range devices (S) |
| NF Z84-761-1 | 電磁兼容性和無線電頻譜管理(ERM).短程裝置.在2.45GHz頻率范圍內運行的鐵路車輛的自動識別.第1部分:技術特 | () |
| NF Z84-839-1 | 電磁兼容性和無線電頻譜管理(ERM).在頻率范圍:超低功率有源醫用設備和輔助設備用的頻率范圍:402 MHz ～ 405 | () |
| NF Z84-839-2 | 電信.電磁兼容性和無線電頻譜管理(ERM).超低功率活性醫療植入物和附件用頻率范圍402MHz-405MHz的無線電設備 | () |
| NF Z85-063 | 固定無線電系統.多點設備.工作頻率范圍31.0GHz-33.4GHz(32GHz)的多點數字無線電系統 | (Fixed Radio Systems - Multipoint equipment - Multipoint digital radio systems operating in the 31,0 GHz to 33,4 GHz (32 GHz) frequency range.) |
| NF Z85-215-2 | 固定無線電系統.點對多點天線.在頻率范圍:11 GHz ～ 60 GHz的固定無線電系統點對多點天線 | (Fixed radio systems - Point to multipoint antennas - Antennas for point-to-multipoint fixed radio systems in the 11 GHz to 60 GHz band - Part 2 : 24 GHz to 30 GHz.) |
| NF Z85-408 | 電信.固定無線電系統.點對點設備.不要求同等頻率設計的58 GHz下數字信號和模擬視頻信號傳輸用數字無線電系 | (Telecommunications - Fixed radio systems - Point-to-point equipment - Parameters for digital radio systems for the transmission of digital signals and analogue video signals operating at around 58 GHz) |
| NF Z85-430 | 傳輸和多路轉換(TM).數字無線電繼電系統(DRRS).在18GHZ頻率譜帶范圍內有55MHZ空間頻道操作的攜帶1x同步運輸 | () |
| NF Z85-630 | 傳輸和多路轉換(TM).在1,4GHz頻率帶內操作的低容量點對點數字無線電繼電系統(DRRS) | (Transmission and Multiplexing (TM). Low capacity point-to-point Digital Radio-Relay Systems (DRRS) operating in the 1,4 GHz frequency band.) |
| NF Z85-632 | 傳輸和多路轉換(TM).在頻率范圍:24.25GHz～29.50GHz和31.0GHz～31.8 GHz.工作的模擬視頻信號的傳輸用固定無 | (Transmission and Multiplexing (TM) - Fixed radio link equipment for the transmission of analogue video signals operating in the frequency bands 24,25 GHz to 29,50 GHz and 31,0 GHz to 31,8 GHz.) |
| NF Z85-633 | 傳輸和多路轉換(TM).數字無線電繼電系統(DRRS).在頻率范圍為2,1GHz至2,6GHz內操作的低容量和中容量點對點數 | (Transmission and Multiplexing (TM). Digital Radio-Relay Systems (DRRS). Low and medium capacity point-to-point DDRS operating in the frequency range 2,1 to 2,6 GHz.) |
| NF Z85-636 | 傳輸和多路轉換(TM). 在頻率范圍為1GHz至3GHz內的點對多點數字無線電系統的時間分支多路通道(TDMA) | (Transmission and Multiplexing (TM). Time Division Multiple Access (TDMA) point-to-multipoint digital radio systems in the frequency range 1 to 3 GHz.) |
| NF Z85-638 | 傳輸和多路轉換(TM). 數字無線電繼電系統.在頻率譜帶范圍為10GHz和14GHz內的有20MHz可轉換通路空間內操作的 | () |
| NF Z85-833 | 固定無線電系統.點對點天線.在頻率帶3GHZ-60GHZ范圍內操作的點對點固定無線電系統 | (Fixed Radio Systems - Point-to-Point Antennas - Antennas for point-to-point fixed radio systems operating in the frequency band 3 GHz to 60 GHz.) |
| NF Z86-157 | 衛星地面站和系統(SES).在11/12GHZ頻率范圍操作的只接收非常小孔徑終端(VSATS) | (SATELLITE EARTH STATIONS AND SYSTEMS (SES). RECEIVE-ONLY VERY-SMALL APERTURE TERMINAL (VSATS) OPERATING IN THE 11/12 GHZ FREQUENCY BANDS. (EUROPEAN TELECOMMUNICATION STANDARD ETS 300157).) |
| NF Z86-159 | 衛星地面站和系統(SES).在固定衛星服務(FSS)11/12/14GHZ頻率范圍應用的通信操作的只發射或發射接受非常小孔 | () |
| NF Z86-332 | 衛星地面站和系統(SES).用于通信操作的在固定的衛星服務器(FSS)6GH和4GH頻率帶內只發射或發射和接收非常小 | () |
| NF Z86-333 | 衛星地面站和系統(SES).在4GHZ頻率范圍內的只接收非常小孔徑終端(VSATS).(ETS300333) | (SATELLITE EARTH STATIONS AND SYSTEMS (SES). RECEIVE-ONLY VERY SMALL APERTURE TERMINALS (VSATS) OPERATING IN THE 4 GHZ FREQUENCY BAND. (EUROPEAN TELECOMMUNICATION STANDARD ETS 300333).) |
| NF Z86-740 | 衛星地面站和系統(SES).在1,5/1,6 GHz頻率帶工作,可以用小比特速率進行數據通信(LBRDC),對報警及安全通信沒 | () |
| NF Z86-784 | 衛星地面站和系統.在11/12GHZ頻率帶范圍操作的只接收電視的衛星地面站 | (Satellite Earth Station and Systems (SES) - Television Receive-Only (TVRO) satellite earth stations operating in the 11/12 GHz frequency bands.) |
| NF Z86-926 | 地面衛星站和系統(SES).地球同步衛星的遙測、指揮和距離調整(TCR)用無線電頻率調制標準 | (Satellite earth stations and systems (SES) - Radio frequency and modulation standard for telemetry, command and ranging (TCR) of geostationary communications satellites.) |
| NF Z87-831 | 電磁兼容性和無線電頻譜(ERM).1.6/2.4GHZ和2GHZ頻率波段下操作的衛星個人通信網(S-PCN)內使用的海上移動地 | (Electromagnetic compatibility and Radio spectrum Matters (ERM). ElectroMagnetic Compatibility (EMC) for Mobile Earth Stations (MES) used within Satellite Personal Communications Networks (S-PCN) operating in the 1,6/2,4 GHz and 2 GHz frequency bands.) |
| NF Z88-477 | 通用個人電信(UPT).UPT階段2.UPT集成線路卡(ICC)和卡的接收裝置(CAA).接口的功能規范.適用于雙音調多頻率裝 | (Universal Personal Telecommunication (UPT) - UPT Phase 2 - Fonctional specification of the interface of a UPT Integrated Circuit Card (ICC) and Card Accepting Devices (CAD) - UPT card accepting Dual T) |
| 編號 | 中文名稱 | 英文名稱 |