    
返回首頁 | 公司簡介 | 人才招聘 | 在線報價 | 聯系我們 | 區域合作 |
|
返回首頁 | 公司簡介 | 人才招聘 | 在線報價 | 聯系我們 | 區域合作 |
相關查詢：
| 編號 | 中文名稱 | 英文名稱 |
| BS 2782-6 Method 641A-1983 | 塑料的試驗方法.尺寸特性.100℃時撓性聚氯乙烯薄板尺寸穩定性的測定 | (Methods of testing plastics - Dimensional properties - Determination of dimensional stability at 100 鳦 of flexible polyvinyl chloride sheet) |
| BS 2782-6 Method 643A-1976 | 塑料的試驗方法.第6部分:尺寸特性.試驗方法643A:收縮包裝用薄膜熱縮變 | (Methods of testing plastics - Dimensional properties - Shrinkage on heating of film intended for shrink wrapping applications) |
| BS 2782-6 Method 643B-1996 | 塑料檢驗法.第6部分:尺寸特性.第643B方法:薄膜和薄片加熱時尺寸變化的測定 | (Methods of testing plastics - Dimensional properties - Determination of dimensional change on heating of film and sheeting) |
| BS 2782-6 Methods 620A to 620D | 塑料的試驗方法.尺寸特性.非泡沫塑料的密度和相對密度的測定 | (Methods of testing plastics - Dimensional properties - Determination of density and relative density of non-cellular plastics) |
| BS 2782-7 Method 720B-1979 | 塑料的試驗方法.第7部分:流變性能.試驗方法720B:苯酚與醇酸模制材料的杯模流動溢法流動性 | (Methods of testing plastics - Rheological properties - Cup flow of phenolic and alkyd moulding materials) |
| BS 2782-7 Method 721A-1988 | 塑料的試驗方法. 第7部分:流變性能.試驗方法721A:由樹脂浸漬玻璃纖維測定樹脂流失量 | (Methods of testing plastics - Rheological properties - Determination of resin flow from resin impregnated glass fabric) |
| BS 2782-7 Method 722B-1996 | 塑料的試驗方法.第7部分:流變性能.試驗方法722B:使用毛細管和縫模流變儀測定塑料的流動性 | (Methods of testing plastics - Rheological properties - Determination of the fluidity of plastics using capillary and slit-die rheometers) |
| BS 2782-7 Method 732D-1999 | 測試塑料的方法.流變特性.用毛細管粘度計測定稀釋溶液中聚碳酸酯模塑和擠壓材料的粘度 | (Methods of testing plastics - Rheological properties - Determination of the viscosity of polycarbonate (PC) moulding and extrusion materials in dilute solution using capillary viscometers) |
| BS 2782-7 Method 732F-1991 | 塑料的試驗方法.第7部分:流變性能.試驗方法732F:異丁烯酸甲酯聚合物粘度值的測定 | (Methods of testing plastics - Rheological properties - Determination of viscosity number of methyl methacrylate polymers) |
| BS 2782-7 Method 740B-1996 | 塑料的試驗方法.第7部分:變流性能.方法740B:聚合物懸浮液和合成橡膠乳液.凍結-溶化循環穩定性試驗 | (Methods of testing plastics - Rheological properties - Polymer dispersions and synthetic rubber latices - Freeze-thaw cycle stability test) |
| BS 2782-7 Method 740C-1996 | 塑料的試驗方法.第7部分:變流性能.方法740C:聚合物懸浮液.白點溫度和最快薄膜形成溫度的測定 | (Methods of testing plastics - Rheological properties - Polymer dispersions - Determination of white point temperature and minimum film-forming temperature) |
| BS 2782-8 Method 820A-1996 | 塑料的試驗方法.其他性能.水蒸氣透過率的測定(盤測法) | (Methods of testing plastics - Other properties - Determination of water vapour transmission rate (dish method)) |
| BS 2782-8 Method 821A-1979 | 塑料的試驗方法.第8部分:其他性能.試驗方法821A:常壓下薄片和薄膜透氣率的測定(壓力計) | (Methods of testing plastics. Other properties. Determination of the gas transmission rate of films and thin sheets under atmospheric pressure (manometric method)) |
| BS 2782-8 Method 822A-1992 | 塑料的試驗方法.其他性能.塑料薄膜對水蒸汽傳輸速度的測定 | (Methods of testing plastics - Other properties - Determination of water vapour transmission rate of plastics films (sachet method)) |
| BS 2782-8 Method 824A-1996 | 塑料的試驗方法.第8部分:其他性能.試驗方法824A:塑料薄膜和薄板的摩擦系數的測定 | (Methods of testing plastics - Other properties - Film and sheeting - Determination of the coefficients of friction) |
| BS 2782-8 Method 825A-1996 | 塑料的試驗方法. 第8部分:其他性能.試驗方法824A:塑料薄膜和薄板的粘著性的測定 | (Methods of testing plastics - Other properties - Film and sheeting - Determination of blocking resistance) |
| BS 2782-8 Method 826A-1992 | 塑料的試驗方法.其它性能.塑料片印痕附著力的測定 | (Methods of testing plastics - Other properties - Determination of adhesion of print on plastics sheet) |
| BS 2782-8 Method 835A-1980 | 塑料的試驗方法.其他性能.酚醛樹脂膠凝時間的測定 | (Methods of testing plastics - Other properties - Determination of gelation time of phenolic resins) |
| BS 2782-8 Method 835B-1980 | 塑料的試驗方法.其他性能.聚酯樹脂膠凝時間的測定(手工方法) | (Methods of testing plastics - Other properties - Determination of gelation time of polyester resins (manual method)) |
| BS 2782-8 Method 835C-1980 | 塑料的試驗方法.第8部分:其他性能.試驗方法835C:用凝膠體計時計對聚酯樹脂和環氧樹脂膠凝時間的測定 | (Methods of testing plastics - Other properties - Determination of gelation time of polyester and epoxide resins using a gel timer) |
| BS 2782-8 Method 835D-1980 | 塑料的試驗方法.第8部分:其他性能.試驗方法835D:用熱板對熱固性樹脂膠凝時間的測定 | (Methods of testing plastics - Other properties - Determination of gelation time of thermosetting resins using a hot plate) |
| BS 2782-8 Methods 823A and 823 | 塑料的試驗方法.第8部分:其他性能.試驗方法823A和823B:使用顯微鏡對聚乙烯中碳黑分散的評定方法 | (Methods of testing plastics - Other properties - Methods for the assessment of carbon black dispersion in polyethylene using a microscope) |
| BS 2782-9 Method 901A-1988 | 塑料的試驗方法.第9部分:取樣和試樣的制備.試驗方法901A:熱塑性材料的壓制模制試樣 | (Methods of testing plastics - Sampling and test specimen preparation - Compression moulding test specimens of thermoplastic materials) |
| BS 2782-9 Method 940A-1990 | 塑料的試驗方法. 第9部分:取樣和試樣的制備.試驗方法940A:具有規定回縮率的無定形熱塑塑料棒材試樣的制備 | (Methods of testing plastics - Sampling and test specimen preparation - Preparation of test specimens of amorphous thermoplastics in the form of bars with a specified reversion) |
| BS 2782-9 Method 940B-1989 | 塑料的試驗方法. 第9部分:取樣和試件的制備.試驗方法940B:用注塑矩形板制備具有規定回縮率的無定形熱塑性試 | (Methods of testing plastics - Sampling and test specimen preparation - Preparation of test specimens of amorphous thermoplastics with a specified reversion by injection moulding rectangular plates) |
| BS 2795-1981 | 長度測量用杠桿式千分測試指示器規范 | (Specification for dial test indicators (lever type) for linear measurement) |
| BS 2797-1976 | 煤氣表膜片用皮革規范 | (Specification for leathers for gas meter diaphragms) |
| BS 2799-1974 | 建筑與工程用動力驅動塔式起重機規范 | (Specification for power-driven tower cranes for building and engineering construction) |
| BS 2808-1969 | 地方機關美術水彩畫筆規范 | (Specification for artists’ water-colour brushes for local authorities) |
| BS 2811-1969 | 煙霧密度指示器與記錄器規范 | (Specification for smoke density indicators and recorders) |
| BS 2816-1989 | 工程用銀和銀合金電鍍層規定方法 | (Method for specifying electroplated coatings of silver and silver alloys for engineering purposes) |
| BS 2819-1990 | 機織物和針織物的弓緯、緯斜和縱向扭變的測定方法 | (Methods for determination of bow, skew and lengthway distortion in woven and knitted fabrics) |
| BS 282, 389-1963 | 涂料用鉛鉻和鋅鉻規范 | (Specifications for lead chromes and zinc chromes for paints) |
| BS 282-1963 | 涂料用鉛鉻與鋅鉻規范 | (Specifications for lead chromes and zinc chromes for paints) |
| BS 2827-1957 | 機用壓制螺母(Ｂ.Ａ與惠氏螺紋)規范 | (Specification for machine screw nuts, pressed type (B.A. and Whitworth form threads)) |
| BS 283-1995 | 鐵藍色顏料規范 | (Specification for iron blue pigments) |
| BS 2830-1994 | 用于建筑、工程、高空及清洗工業的懸吊式進入設備(吊椅、傳統用的高空作業工人座椅、罐籠、安全架及平臺) | (Specification for suspended access equipment (suspended chairs, traditional steeplejack’s seats, work cages, cradles and platforms) for use in the building, engineering construction, steeplejack and c) |
| BS 2832-1957 | 土層加熱防潮敷層規范 | (Specification for hot applied damp resisting coatings for solums) |
| BS 2837-1988 | 包裝箱提升裝置用鋼鉸鏈與鏈帶組件規范 | (Specification for steel links and strap assemblies for lifting attachments for packing cases) |
| BS 2838-1-1988 | 診查床.第1部分:固定高診查床規范 | (Examination and general treatment couches - Specification for fixed height couches) |
| BS 2838-2-1991 | 診察和一般處理用睡椅.第2部分:可變高度睡椅規范 | (Examination and general treatment couches - Specification for variable height couches) |
| BS 2842-1992 | 旋渦式濕度計規范 | (Specification for whirling hygrometer) |
| BS 2844-1995 | 固體電絕緣材料試驗前與試驗時的標準條件 | (Standard conditions for use prior to and during the testing of solid electrical insulating materials) |
| BS 2846-1-1991 | 數據統計整理分析指南.第1部分:定量數據的常規分析 | (Guide to statistical interpretation of data - Routine analysis of quantitative data) |
| BS 2846-2-1981 | 統計數據說明指南.第2部分:均值估計.置信度 | (Guide to statistical interpretation of data - Estimation of the mean: confidence interval) |
| BS 2846-3-1975 | 統計數據說明指南.第3部分:統計容許區間的確定 | (Guide to statistical interpretation of data - Determination of a statistical tolerance interval) |
| BS 2846-4-1976 | 統計數據說明指南.第4部分:與平均值和方差值有關的估算與試驗的技術 | (Guide to statistical interpretation of data - Techniques of estimation and tests relating to means and variances) |
| BS 2846-5-1977 | 統計數據說明指南.第5部分:與平均值和方差值有關的試驗功效 | (Guide to statistical interpretation of data - Power of tests relating to means and variances) |
| BS 2846-6-1976 | 統計數據說明指南.第6部分:配對觀察時兩個平均值的比較 | (Guide to statistical interpretation of data - Comparison of two means in the case of paired observations) |
| BS 2846-7-1997 | 統計數據說明指南.第7部分:正態偏差檢驗 | (Guide to statistical interpretation of data - Tests for departure from normality) |
| BS 2846-8-2001 | 數據統計整理分析指南.中值.估計和置信空間 | (Guide to statistical interpretation of data - Median - Estimation and confidence intervals) |
| BS 2853-1957 | 架空吊車道鋼梁的設計與試驗規范 | (Specification for the design and testing of steel overhead runway beams) |
| BS 2856-1973 | 工程圖的英制與米制尺寸的精確換算 | (Precise conversion of inch and metric sizes on engineering drawings) |
| BS 2857-1976 | 變壓器與扼流圈疊片用鎳鐵規范 | (Specification for nickel-iron transformer and choke laminations) |
| BS 2858-1957 | 制造鍍鋅罐用鋼板規范 | (Specification for steel plates for use in the manufacture of galvanizing pots) |
| BS 2861-1984 | 牽伸、穿筘和提綜的織造圖的表示方法 | (Methods for presentation of a weave diagram and plans for drafting, denting and lifting) |
| BS 2866-1984 | 織物單位面積經紗與緯紗質量的測定方法 | (Methods for determination of the mass of warp and weft per unit area of fabric) |
| BS 2868-1968 | 電鍍用鎘陽極與氧化鎘規范 | (Specification for cadmium anodes and cadmium oxide for electroplating) |
| BS 2869-1998 | 農用,家用,工業引擎和鍋爐用燃油規范 | (Specification for fuel oils for agricultural, domestic and industrial engines and boilers) |
| BS 2879-1980 | 排水旋塞(下旋式)規范 | (Specification for draining taps (screw-down pattern)) |
| BS 2880 Addendum No. 1-1959 | 醋酸纖維素片的試驗方法 | (Methods of testing cellulose acetate flake) |
| BS 2880-1991 | 醋酸纖維素片的試驗方法 | (Methods of testing cellulose acetate flake) |
| BS 2881-1989 | 衛生保健室儲藥柜規范 | (Specification for cupboards for the storage of medicines in health care premises) |
| BS 2889-1967 | 用雜質分析機測定紡紗用棉花廢物含量和紡紗廢物及紡紗用皮棉廢棄物含量的方法 | (Method for the determination of trash content of cotton and for trash and lint content of waste intended for spinning, by the Shirley analyser) |
| BS 2890-1989 | 槽式皮帶輸送機規范 | (Specification for troughed belt conveyors) |
| BS 2891-1992 | 手術臺軟墊和軟墊斷面規范 | (Specification for operating table mattresses and mattress sections) |
| BS 2892-1974 | 一次性使用的番茄木盤規范 | (Specification for non-returnable wooden trays for tomatoes) |
| BS 2893-1989 | 便攜式和可運輸?shù)幕瘜W(xué)藥劑箱(飛機上所使用的除外)的化學制劑規范 | (Specification for chemical preparations for portable and transportable chemical closets (excluding those for use in aircrafts)) |
| BS 2897-1970 | 電工用鍛鋁.具有拉拔或軋制邊的帶材 | (Specification for wrought aluminium for electrical purposes - Strip with drawn or rolled edges) |
| BS 2901-3-1990 | 氣體保護電弧焊用焊條和焊絲規范.第3部分:銅和銅合金規范 | (Filler rods and wires for gas-shielded arc welding - Specification for copper and copper alloys) |
| BS 2901-4-1990 | 氣體保護電弧焊用焊條和焊絲規范.第4部分:鋁、鋁合金和鎂合金規范 | (Filler rods and wires for gas-shielded arc welding - Specification for aluminium and aluminium alloys and magnesium alloys) |
| BS 2901-5-1990 | 氣體保護電弧焊用焊條和焊絲規范.第5部分:鎳和鎳合金規范 | (Filler rods and wires for gas-shielded arc welding - Specification for nickel and nickel alloys) |
| BS 2909-1957 | 狗的電安樂死室規范 | (Specification for cabinets for the electrical euthanasia of dogs) |
| BS 2917-1-1993 | 流體動力系統和件的圖形符號和線路圖.圖形符號規范 | (Graphic symbols and circuit diagrams for fluid power systems and components - Specification for graphic symbols) |
| BS 2919-1968 | 普通低密度和中密度聚乙烯棒規范 | (Specification for low and intermediate density polythene rod for general purposes) |
| BS 2922-1-1985 | 濕紙、紙板的強度.第1部分:紙與紙板浸水后破裂強度的測定方法 | (Strength of wet paper and board - Method for determination of the bursting strength of paper and board after immersion in water) |
| BS 2922-2-1984 | 濕紙、紙板的強度.紙與紙板浸水后抗拉強度的測定方法 | (Strength of wet paper and board - Method for determination of the tensile strength of paper and board after immersion in water) |
| BS 2924-1-1983 | 紙、紙板與紙漿的水解萃取物.第1部分:pH值測定方法 | (Aqueous extracts of paper, board and pulp - Method for determination of pH) |
| BS 2924-2-1992 | 紙、紙板和紙含水萃取物.第2部分:電導率的測定 | (Aqueous extracts of paper, board and pulp - Determination of conductivity) |
| BS 2930-1970 | 外科用彈簧式托帶規范 | (Specification for surgical spring trusses) |
| BS 2945-1995 | 斧子和手斧規范 | (Specification for axes and hatchets) |
| BS 2950-1958 | 電信與輕便電器用管狀熔斷片規范 | (Specification - Cartridge fuse-links for telecommunication and light electrical apparatus) |
| BS 2952-1958 | 內燃機冷卻系統用橡皮管規范 | (Specification for rubber hose for i.c. engine cooling systems) |
| BS 2955-1993 | 粒子工業術語匯編 | (Glossary of terms relating to particle technology) |
| BS 2957-1958 | 消防員用槐木把斧頭規范 | (Specification for fireman’s axe with ash handle) |
| BS 2969-1980 | 鏈?zhǔn)捷斔蜋C(jī)與刨煤機用高強度鋼鏈(圓鏈節)規范 | (Specification for high-tensile steel chains (round link) for chain conveyors and coal ploughs) |
| BS 2971-1991 | 輸送流體用碳鋼管道二級電弧焊規范 | (Specification for class II arc welding of carbon steel pipework for carrying fluids) |
| BS 2975-1988 | 玻璃制造用砂的取樣和分析方法 | (Methods for sampling and analysis of glass-making sands) |
| BS 2977-1958 | 使用液化石油氣的家用照明器具 | (Domestic lighting appliances for use with liquefied petroleum gases) |
| BS 2979-1958 | 西里爾與希臘字母的譯音 | (Transliteration of Cyrillic and Greek characters) |
| BS 2982-1992 | 有可卸刀片的外科解剖刀的材料和包裝規范 | (Specification for materials and packaging of surgical scalpels with detachable blades) |
| BS 2987-1958 | 紙?jiān)囼?yàn)用統計學的注解 | (Notes on the application of statistics to paper testing) |
| BS 2992-1970 | 地方當局公共機關油漆工和裝飾工用刷子(配件的質量除外)規范 | (Specification for painters’ and decorators’ brushes for local authorities and public institutions (excluding quality of fillings)) |
| BS 2A 110-1962 | 飛行器用抗剪鋼螺母(統一六角形和統一螺紋)規范 | (Specification for steel nuts (Unified hexagons and Unified threads) for shear bolts for aircraft) |
| BS 2A 122, 2A 123, 2A 124-1981 | 飛行器用防松螺母(統一螺紋)規范 | (Specification for clinch nuts (Unified threads) for aircraft) |
| BS 2A 122-1981 | 飛行器用壓緊螺塞(統一螺紋)規范 | (Specification for clinch nuts (Unified threads) for aircraft) |
| BS 2A 173-1962 | 飛行器用100°埋頭鋼螺栓(統一螺紋)規范 | (Specification for 100 ?countersunk head steel bolts (Unified threads) for aircraft) |
| BS 2A 174-1962 | 飛行器用100°抗腐蝕埋頭鋼螺栓(統一螺紋)規范 | (Specification for 100 ?countersunk head corrosion-resisting steel bolts (Unified threads) for aircraft) |
| BS 2A 175-1962 | 飛行器用100°鋁合金埋頭螺栓(統一螺紋)規范 | (Specification for 100 ?countersunk head aluminium alloy bolts (Unified threads) for aircraft) |
| BS 2A 204, 2A 206 [...]-1963 | 航空用 | (Specifications for machine screws and nuts (Unified threads) below) |
| BS 2A 204, 2A 206, 2A 208 and | 航空用低于4英寸的設備螺釘和螺母(統一螺紋)規范 | (Specifications for machine screws and nuts (Unified threads) below) |
| BS 2A 204-1963 | 飛行器用小于1/4英寸機器螺釘和螺母(統一螺紋)規范 | (Specifications for machine screws and nuts (Unified threads) below) |
| BS 2A 210-1962 | 飛行器用黃銅螺母(統一六角形和統一螺紋)規范 | (Specification for brass nuts (Unified hexagons and Unified threads) for aircraft) |
| BS 2A 229-1972 | 160,000磅力/平方英寸(1100MPa)六角頭鋼螺栓規范 | (Specification for hexagonal head steel bolts 160000 lbf/inUP2 (1100/MPa)) |
| BS 2A 230-1974 | 100°埋頭鋼螺栓(1100MPa,具有高扭矩高速旋入槽)規范 | (Specification for 100°countersunk head steel bolts [1100 MPa with Hi-torque speed drive recesses]) |
| BS 2A 231-1993 | 螺栓用滾壓螺紋.退刀紋和導入紋要求 | (Rolled threads for bolts - Lead and runout requirements) |
| BS 2A 24-1962 | 飛行器用抗腐蝕鋼制六角螺母(B.A和B.S.F螺紋)(普通形、薄形、槽形、槽頂形)規范 | (Specification for corrosion-resisting steel hexagonal nuts (B.A and B.S.F. threads) (ordinary, thin, slotted and castle) for aircraft) |
| BS 2A 25-1962 | 飛行器用鋼制六角頭螺栓(B.A和B.S.F螺紋)規范 | (Specification for steel hexagonal-headed bolts (B.A. and B.S.F. threads) for aircraft) |
| BS 2A 26-1962 | 飛行器用抗腐蝕鋼制六角頭螺栓(B.A和B.S.F螺紋)規范 | (Specification for corrosion-resisting steel hexagonal-headed bolts (B.A and B.S.F. threads) for aircraft) |
| BS 2A 27-1962 | 飛行器用鋼制六角螺母(B.A和B.S.F螺紋)(普通形.薄形.槽形和槽頂形)規范 | (Specification for steel hexagonal nuts (B.A. and B.S.F threads) (ordinary, thin, slotted and castle) for aircraft) |
| BS 2A 29-1962 | 飛行器用鋁合金六角螺母(B.A和B.S.F螺紋)(普通形和槽形)規范 | (Specification for aluminium alloy hexagonal nuts (B.A and B.S.F. threads) (ordinary and slotted) for aircraft) |
| BS 2A 294-1998 | 花鍵傳動.板手形狀.米制系列 | (Spline drives - Wrenching configuration - Metric series) |
| BS 2A 295-2000 | 最大操作溫度低于或等于425℃的自鎖螺母.試驗方法 | (Nuts, self-locking, with maximum operating temperature less than or equal to 425 鳦 - Test methods) |
| BS 2A 296-1995 | 螺栓和螺釘米制的形狀和位置公差 | (Bolts and screws, metric - Tolerances of form and position) |
| BS 2A 30-1962 | 飛行器用鋼制六角頭緊公差螺栓(B.A和B.S.F螺紋)規范 | (Specification for steel hexagonal-headed bolts (B.A. and B.S.F threads) with close tolerance shanks for aircraft) |
| BS 2A 302-2000 | 最大操作溫度低于或等于425℃的自鎖螺母.購置規范 | (Nuts, self-locking, with maximum operating temperatures less than or equal to 425 鳦 - Procurement specification) |
| BS 2A 57-1962 | 飛行器用鋼制六角頭抗剪螺栓(B.S.F螺紋)規范 | (Specification for steel hexagonal-headed shear bolts (B.S.F. threads) for aircraft) |
| BS 2A 58-1962 | 飛行器鋼制六角頭抗剪螺母(B.S.F螺紋)規范 | (Specification for steel hexagonal nuts (B.S.F. threads) for shear bolts for aircraft) |
| BS 2A 59-1962 | 飛行器用鋼制六角頭鍍鎘緊公差螺栓(B.A和B.S.F螺紋)規范 | (Specification for cadmium-plated steel hexagonal-headed bolts (B.A. and B.S.F. threads) with close tolerance shanks for aircraft) |
| BS 2A 60-1962 | 飛行器用鋼制六角頭抗剪螺栓(B.S.F螺紋)規范 | (Specification for cadmium-plated steel hexagonal-headed shear bolts (B.S.F. threads) for aircraft) |
Copyright ? 2008 Worldwide Translation.
寬天下翻譯公司版權所有.Tel:010-83345348
? 相關文章
成功案例：
服務語言:
英語翻譯 | 西班牙語翻譯 | 法語翻譯 | 意大利語翻譯 | 韓語翻譯 | 葡萄牙語翻譯 | 德語翻譯 | 日語翻譯
技術標準翻譯
