微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ANSI C37.85 | 電力開關用交流高壓電力真空斷路器的X射線輻射極限 | Interrupters Used in Power Switchgear, X-Radiation Limits for AC High-Voltage Power Vacuum |
| ANSI Z21.22a | 減壓閥和真空截止閥 | Pressure Relief Valves and Vacuum Relief Valves |
| ANSI/ASME A112.19.17 | 住宅區和商業區游泳池、健康中心、熱浴盆和淺水池水抽吸系統的人造安全真空排放系統 | Manufactured Safety Vacuum Release Systems for Residential and Commercial Swimming Pool, Spas, Hot Tub and Wading Pool Suction Systems |
| ANSI/ASME A112.3.1 | 地上和地下衛生排水、排污及放氣(DWV)、雨水和真空設備用不銹鋼排水系統 | Stainless Steel Drainage Systems for Sanitary DWV, Storm, and Vacuum Applications, Above and Below-Ground |
| ANSI/ASSE 1001 | 應用管道的大氣式真空制動器 | Pipe-Applied Atmospheric-Type Vacuum Breakers |
| ANSI/ASSE 1011 | 軟管連接真空軋碎機 | Hose Connection Vacuum Breakers |
| ANSI/ASSE 1019 | 防凍自動排水型真空開關墻壁消防栓性能要求 | Performance Requirements for Vacuum Breaker Wall Hydrant, Freeze Resistant Automatic Draining Type |
| ANSI/ASSE 1020 | 壓力真空斷路器組件 | Pressure Vacuum Breakers Assembly |
| ANSI/ASSE 1056 | 倒虹吸回流真空關閉閥 | Back Siphonage Backflow Vacuum Breakers |
| ANSI/ASTM A469 | 用于發電機轉子的真空處理鋼鍛件規范 | Specification for Vacuum-Treated Steel Forgings for Generator Rotors |
| ANSI/ASTM A768 | 渦輪機轉子及軸用經真空處理的12/T%鉻合金鋼鍛件規范 | Specification for Vacuum-Treated 12/T% Chromium Alloy Steel Forgings for Turbine Rotors and Shafts |
| ANSI/ASTM A940 | 渦輪轉子用差溫?zé)崽幚碚婵仗幚礓撳懠?、合金?guī)范 | Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors |
| ANSI/ASTM D2715 | 真空中潤滑劑揮發率的試驗方法 | Test Method for Volatilization Rates of Lubricants in Vacuum |
| ANSI/ASTM D5188 | 測定燃料汽-液比溫度的試驗方法(真空室法) | Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels Evacuated Chamber Method |
| ANSI/ASTM D5236 | 重?zé)N類混合物的蒸餾試驗方法(真空蒸餾鍋法) | Test Method for Distillation of Heavy Hydrocarbon Mixtures Vacuum Potstill Method |
| ANSI/ASTM D727 | 真空法測定屋頂油氈和鋪地氈煤油值的試驗方法 | Test Method for Kerosine Number of Roofing and Flooring Felt by the Vacuum Method |
| ANSI/ASTM F1038 | 不帶驅動攪拌裝置的罐式手持通用真空吸塵器發動機壽命評定的試驗方法 | Test Method for Motor Life Evaluation of a Canister, Hand-held, Stick, and Utility Type Vacuum Cleaner Without a Driven Agitator |
| ANSI/ASTM F1284 | 評價住宅中央控制真空吸塵器吸除地毯臟物效力的試驗方法 | Test Method for Evaluating Carpet Embedded Dirt Removal Effectiveness of Residential Central Vacuum Cleaning Systems |
| ANSI/ASTM F1326 | 普通真空吸塵器最大干燥空間測量方法 | Test Method for Measuring Maximum Dry Volume of Utility Vacuum Cleaners |
| ANSI/ASTM F1334 | 真空吸塵器噪聲能量等級測定方法 | Test Method for Determining Sound Power Level of Vacuum Cleaners |
| ANSI/ASTM F1410 | 測量通用真空吸塵器的最大功能性濕容量的試驗方法 | Test Method for Measuring Maximum Functional Wet Volume of Utility Vacuum Cleaners |
| ANSI/ASTM F1411 | 真空吸塵器用戶須知信息慣例 | Practice for Presenting Selected Information on Vacuum Cleaners for Consumer Use |
| ANSI/ASTM F1601 | 中央真空吸塵系統家用電動管嘴馬達壽命評估試驗方法 | Test Method for Motor Life Evaluation of a Household Electric Motorized Nozzle for Central Vacuum Cleaning System |
| ANSI/ASTM F1692 | 家庭中央真空吸塵系統渦輪動力噴嘴壽命評估試驗方法 | Test Method for Life Evaluation of aTurbine Powered Nozzle for Household Central Vacuum Cleaning Systems |
| ANSI/ASTM F1977 | 測定真空吸塵器系統初始部分過濾效率的試驗方法 | Test Method for Determining Initial Fractional Filtration Efficiency of a Vacuum Cleaner System |
| ANSI/ASTM F2105 | 測定真空除塵器馬達/風扇系統空氣特性的試驗方法 | Test Method for Measuring Air Performance Characteristics of Vacuum Cleaner Motor/Fan Systems |
| ANSI/ASTM F2222 | 醫用抽吸設備.真空或壓力源驅動的抽吸設備 | Medical Suction Equipment-suction Equipment Powered from a Vacuum or Pressure Source |
| ANSI/ASTM F2608 | 作為真空清潔處理工藝結果測定房間空氣微粒數改變的試驗方法 | Test Method for Determining the Change in Room Air Particulate Counts as a Result of the Vacuum Cleaning Process |
| ANSI/ASTM F2609 | 真空吸塵器的垃圾清潔處理效果的標準試驗方法 | Standard Test Method For litter-cleaning Effectiveness of Vacuum Cleaners |
| ANSI/ASTM F395 | 真空吸塵器術語 | Terminology Relating to Vacuum Cleaners |
| ANSI/ASTM F420 | 真空吸塵器可伸入家具底部深度的測試方法 | Test Method for Access Depth under Furniture of Vacuum Cleaners |
| ANSI/ASTM F430 | 真空吸塵器過濾袋用紙試驗方法 | Test Methods for Paper Used for Vacuum Cleaner Filter Bags |
| ANSI/ASTM F431 | 真空吸塵器充氣室空氣動力性能測量規范 | Specification for Air Performance Measurement Plenum Chamber for Vacuum Cleaners |
| ANSI/ASTM F450 | 真空吸塵器軟管耐熱性及可靠性試驗方法(塑料線增強) | Methods for Testing Vacuum Cleaner Hose for Durability and Reliability (Plastic Wire Reinforced) |
| ANSI/ASTM F486 | 真空吸塵器使用說明書編寫慣例 | Practice for Preparation of Use and Care Booklets for Vacuum Cleaners |
| ANSI/ASTM F494 | 評價真空吸塵器用一次性袋完整性的試驗方法 | Test Methods for Evaluating Primary Disposable Bag Integrity for Vacuum Cleaners |
| ANSI/ASTM F555 | 立式真空吸塵器電動機壽命評定的標準試驗方法 | Standard Test Method for Motor Life Evaluation of an Upright Vacuum Cleaner |
| ANSI/ASTM F595 | 真空吸塵器軟管耐用性及可靠性試驗方法(全塑軟管) | Methods for Testing Vacuum Cleaner Hose for Durability and Reliability (All-Plastic Hose) |
| ANSI/ASTM F608 | 評估地毯的實驗室試驗方法.家用真空吸塵器去除地毯灰塵的有效性 | Laboratory Test Method for Evaluation of Carpet-Embedded Dirt Removal Effectiveness of Household Vacuum Cleaners |
| ANSI/ASTM F655 | 真空吸塵器試驗用地毯和緩沖墊規范 | Specification for Test Carpets and Pads for Vacuum Cleaner Testing |
| ANSI/ASTM F820 | 中央真空吸塵系統空氣性能特征試驗方法 | Test Method for Measuring Air Performance Characteristics of Central Vacuum Cleaning Systems |
| ANSI/ASTM F884 | 中央真空吸塵器馬達壽命評估試驗方法 | Test Method for Motor Life Evaluation of a Central Vacuum Cleaner |
| ANSI/ASTM F888 | 真空吸塵器主灰塵收集器最大功能容積測量方法 | Test Method for Measuring Maximum Function Volume of the Primary Dirt Receptacle in a Vacuum Cleaner |
| ANSI/AWWA C512 | 給水裝置用放氣閥、空氣/真空和混合空氣閥 | Air Release, Air/Vacuum, and Combination Air Valves for Water Works Service |
| ANSI/UL 1017 | 真空吸塵器、吹風式吸塵器和家用地板拋光機的標準（推薦日期11-18-05） | Standard for Vacuum Cleaners, Blower Cleaners, and Household Floor Finishing Machines (proposals dated 11-18-05) |
| ASME A112.19.17 | 住宅和商用游泳池、健康中心、熱浴盆和淺水池吸入系統用人造安全真空排放系統 | (Manufactured safety vacuum release systems (SVRS) for residential and commercial swimming pools, spa, hot tub, and wading pool suction systems) |
| ASME PTC 9 Erratum | 容積式壓縮機,真空泵和鼓風機.正誤表 | (Displacement compressors, vacuum pumps, and blowers; Erratum) |
| ASME PTC 9 | 容積式壓縮機,真空泵和鼓風機 | (Displacement compressors, vacuum pumps, and blowers) |
| ASTM A 469/A 469M | 發電機轉子用真空處理鋼鍛件的標準規范 | Standard Specification for Vacuum-Treated Steel Forgings for Generator Rotors |
| ASTM A 470/A 470M | 渦輪轉子和軸用經真空處理的碳素鋼和合金鋼鍛件的標準規范 | Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts |
| ASTM A 471 | 渦輪轉子盤和葉輪用真空處理合金鋼鍛件的標準規范 | Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels |
| ASTM A 508/A 508Mb | 壓力容器用經淬火和回火真空處理的碳素鋼與合金鋼鍛件的標準規范 | Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels |
| ASTM A 768/A 768M | 渦輪機轉子及軸用經真空處理的含鉻12%的合金鋼鍛件的標準規范 | Standard Specification for Vacuum-Treated 12 % Chromium Alloy Steel Forgings for Turbine Rotors and Shafts |
| ASTM A 940/A 940M | 差溫?zé)崽幚碚婵仗幚礓撳懠?、合金鋼鍛件的?biāo)準規范 | Standard Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors |
| ASTM ANS/ISO 10079-3 | 醫療吸引設備.第3部分:與美國國家標準有偏差的ASTM國際標準認可的真空或用壓力驅動吸引設備 | Medical Suction Equipment - Part 3: Suction Equipment Powered from a Vacuum or Pressure Source Approved as an American National Standard with Deviations by ASTM International |
| ASTM B 699 | 鋼鐵表面鎘真空沉積鍍層標準規范 | Standard Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel |
| ASTM C 1119 | 石棉水泥混合料真空排放的標準試驗方法 | Standard Test Method for Vacuum Drainage of Asbestos-Cement Mixes |
| ASTM C 1214 | 負壓(真空)試驗法測定混凝土管下水道的標準試驗方法 | Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method |
| ASTM C 1214M | 負壓(真空)試驗法測定混凝土管下水道的標準試驗方法(米制) | Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method [Metric] |
| ASTM C 1244a | 回填之前利用負壓(真空)試驗的混凝土污水管檢查孔的標準試驗方法 | Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill |
| ASTM C 1244Ma | 預回填負壓(真空)試驗法測定混凝土下水道人孔的標準試驗方法(米制) | Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill [Metric] |
| ASTM C 1484 | 真空絕緣板的標準規范 | Standard Specification for Vacuum Insulation Panels |
| ASTM C 1618 | 使用負氣壓(真空)或正氣壓的混凝土排污管的標準試驗方法 | Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure |
| ASTM C 1618M | 使用負氣壓(真空)和正氣壓的混凝土排污管的標準試驗方法(米制) | Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure [Metric] |
| ASTM C 1667 | 用熱流儀表器具測量真空板條中心點耐熱性的標準試驗方法 | Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Resistivity of Vacuum Panels |
| ASTM C 740 | 低溫作業中真空反射隔熱標準實施規程 | Standard Practice for Evacuated Reflective Insulation In Cryogenic Service |
| ASTM C 745 | 用有防護的平板蒸發量熱計測定通過真空絕熱材料熱通量的試驗方法 | Test Method for Heat Flux Through Evacuated Insulations Using a Guarded Flat Plate Boiloff Calorimeter |
| ASTM C 830 | 用真空壓力法測定成型耐火材料表觀空隙率、吸水性、表觀比重和體密度的標準試驗方法 | Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure |
| ASTM D 2171 | 用真空毛細管粘度計測定瀝青粘度的標準試驗方法 | Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer |
| ASTM D 2715 | 真空中潤滑劑揮發速率的標準試驗方法 | Standard Test Method for Volatilization Rates of Lubricants in Vacuum |
| ASTM D 3272 | 從溶劑稀釋涂料中真空蒸餾出分析用溶劑的方法 | Vacuum Distillation of Solvents from Solvent-Reducible Paints for Analysis |
| ASTM D 3908 | 容量真空法測定氧化鋁催化劑和催化劑載體上的鉑的氫化學吸附性的標準試驗方法 | Standard Test Method for Hydrogen Chemisorption on Supported Platinum on Alumina Catalysts and Catalyst Carriers By Volumetric Vacuum Method |
| ASTM D 4991 | 用真空法進行空瓶罐泄漏試驗的標準試驗方法 | Standard Test Method for Leakage Testing of Empty Rigid Containers by Vacuum Method |
| ASTM D 5188a | 燃料的汽-液比溫度測定的標準試驗方法(真空室法) | Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber Method) |
| ASTM D 5236 | 重型烴類混合物蒸餾的標準試驗方法(真空罐式蒸餾法) | Standard Test Method for Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill Method) |
| ASTM D 5511 | 在強溶解液真空降解條件下測定塑性材料的真空生物降解的標準試驗方法 | Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions |
| ASTM D 5641 | 真空室評定地工薄膜接縫的標準規范 | Standard Practice for Geomembrane Seam Evaluation by Vacuum Chamber |
| ASTM D 5755 | 用石棉結構值表面負荷用透射電子顯微鏡對塵埃微真空取樣和間接分析的標準試驗方法 | Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Surface Loading |
| ASTM D 5756 | 用透射電子顯微鏡對塵埃中石棉質量濃度作微真空取樣和間接分析的標準試驗方法 | Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Mass Concentration |
| ASTM D 6136 | 用真空法對非飽和的(干的)毛氈的煤油數量測定的標準試驗方法 | Standard Test Method for Kerosene Number of Unsaturated (Dry) Felt by the Vacuum Method |
| ASTM D 622 | 汽車空氣制動和真空制動用橡膠軟管的試驗方法 | Test Methods for Rubber Hose for Automotive Air and Vacuum Brake System |
| ASTM D 6336 | 用真空改良的ε形葉片混合器評定車輛顏料濕度的實施規程 | Practice for Evaluation of Vehicles for Pigment Wetting Using a Vacuum Modified Sigma Blade Mixer |
| ASTM D 6653 | 真空法測定高空對包裝系統影響的標準試驗方法 | Standard Test Methods for Determining the Effects of High Altitude on Packaging Systems by Vacuum Method |
| ASTM D 6752 | 用自動真空密封法測量壓實的瀝青混合料的毛體積比重和密度的標準試驗方法 | Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method |
| ASTM D 6857 | 自動真空密封法測定瀝青鋪面混合料最大比重和密度的標準試驗方法 | Standard Test Method for Maximum Specific Gravity and Density of Bituminous Paving Mixtures Using Automatic Vacuum Sealing Method |
| ASTM D 7144a | 后成金屬測定用高真空取樣法進行表面灰塵收集的標準實施規程 | Standard Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Metals Determination |
| ASTM D 7169 | 用高溫氣相色譜法測定帶有類似原油和大氣以及真空殘留物的樣品的沸點分布的標準試驗方法 | Standard Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography |
| ASTM D 7227 | 用真空干燥器對緊湊型瀝青樣本快速干燥的標準實施規程 | Standard Practice for Rapid Drying of Compacted Asphalt Specimens Using Vacuum Drying Apparatus |
| ASTM D 727 | 真空方法測定屋頂和地板油氈煤油值的標準試驗方法 | Standard Test Method for Kerosine Number of Roofing and Flooring Felt by the Vacuum Method |
| ASTM E 1009 | 分析碳和低合金鋼用光輻射真空分光儀的評估 | Standard Practice for Evaluating an Optical Emission Vacuum Spectrometer to Analyze Carbon and Low-Alloy Steel |
| ASTM E 1086 | 用點對面激發技術作不銹鋼的光輻射真空光譜測定分析 | Standard Test Method for Optical Emission Vacuum Spectrometric Analysis of Stainless Steel by the Point-to-Plane Excitation Technique |
| ASTM E 415a | 碳和低合金鋼光輻射真空光譜測定分析的標準試驗方法 | Standard Test Method for Optical Emission Vacuum Spectrometric Analysis of Carbon and Low-Alloy Steel |
| ASTM E 485 | 采用點對面技術的高爐鐵的光輻射真空光譜測定分析的標準試驗方法 | Standard Test Method for Optical Emission Vacuum Spectrometric Analysis of Blast Furnace Iron by the Point-to-Plane Technique |
| ASTM E 595 | 在真空環境中除氣作用引起的總質量損失和收集到的揮發性可凝聚材料的標準試驗方法 | Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment |
| ASTM E 834 | 用冷凝管測定真空室氣態環境的標準實施規程 | Standard Practice for Determining Vacuum Chamber Gaseous Environment Using a Cold Finger |
| ASTM F 1038 | 不帶驅動攪拌裝置的罐式手持通用真空吸塵器發動機壽命評定的試驗方法 | Standard Test Method for Motor Life Evaluation of a Canister, Hand-held, Stick, and Utility Type Vacuum Cleaner Without a Driven Agitator |
| ASTM F 1284 | 測定住宅中心真空吸塵設備除去地毯深處灰塵效果的標準試驗方法 | Standard Test Method for Evaluating Carpet Embedded Dirt Removal Effectiveness of Residential Central Vacuum Cleaning Systems |
| ASTM F 1326 | 測量通用真空吸塵器的最大干燥空間的標準試驗方法 | Standard Test Method for Measuring Maximum Dry Volume of Utility Vacuum Cleaners |
| ASTM F 1334 | 測定真空吸塵器A-加重聲音功率級的標準試驗方法 | Standard Test Method for Determining A-Weighted Sound Power Level of Vacuum Cleaners |
| ASTM F 1409 | 清潔地毯時真空吸塵器直線移動的標準試驗方法 | Standard Test Method for Straight Line Movement of Vacuum Cleaners While Cleaning Carpets |
| ASTM F 1410 | 測量通用真空吸塵器最大功能濕容積的測試方法 | Standard Test Method for Measuring Maximum Functional Wet Volume of Utility Vacuum Cleaners |
| ASTM F 1411 | 為用戶使用提供真空吸塵器現行精選信息的標準實施規程 | Standard Practice for Presenting Selected Information on Vacuum Cleaners for Consumer Use |
| ASTM F 1594 | 真空鍍膜用純鋁(未摻雜質)原材料標準規范 | Standard Specification for Pure Aluminum (Unalloyed) Source Material for Vacuum Coating Applications |
| ASTM F 1601 | 中央真空除塵系統用電動排氣管的發動機壽命評估標準試驗方法 | Standard Test Method for Motor Life Evaluation of an Electric Motorized Nozzle for Central Vacuum Cleaning Systems |
| ASTM F 1692 | 家用中央真空除塵系統用渦輪動力排氣管壽命評定的標準試驗方法 | Standard Test Method for Life Evaluation of a Turbine-Powered Nozzle for Household Central Vacuum Cleaning Systems |
| ASTM F 19 | 鍍金屬陶瓷密封件抗拉及真空試驗方法 | Test Method for Tension and Vacuum Testing Metalized Ceramic Seals |
| ASTM F 1977 | 測定真空吸塵器系統初始部分過濾效率的標準試驗方法 | Standard Test Method for Determining Initial, Fractional, Filtration Efficiency of a Vacuum Cleaner System |
| ASTM F 2105 | 測量真空吸塵器發動機/風扇系統的空氣性能特性的標準試驗方法 | Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaner Motor/Fan Systems |
| ASTM F 2158 | 住宅中央真空管及配件的標準規范 | Standard Specification for Residential Central-Vacuum Tube and Fittings |
| ASTM F 2338 | 用真空衰變法的包裝緊密性無損檢驗的標準試驗方法 | Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method |
| ASTM F 2387 | 游泳池、水療中心和熱管用人造安全真空排放系統(SVRS)的標準規范 | Standard Specification for Manufactured Safety Vacuum Release Systems (SVRS) for Swimming Pools, Spas and Hot Tubs |
| ASTM F 2544 | 測定中央火電廠真空系統A重量聲級的標準試驗方法 | Standard Test Method for Determining A-Weighted Sound Power Level of Central Vacuum Power Units |
| ASTM F 2607 | 測量家用/商用真空吸塵器的硬表面地板清潔能力的標準試驗方法 | Standard Test Method for Measuring the Hard Surface Floor-Cleaning Ability of Household/Commercial Vacuum Cleaners |
| ASTM F 2608 | 測定作為真空清潔處理結果的室內空氣顆粒計數變化用標準試驗方法 | Standard Test Method for Determining the Change in Room Air Particulate Counts as a Result of the Vacuum Cleaning Process |
| ASTM F 2609 | 真空吸塵器垃圾清理有效性的標準試驗方法 | Standard Test Method for Litter-Cleaning Effectiveness of Vacuum Cleaners |
| ASTM F 395 | 真空吸塵器的相關標準術語 | Standard Terminology Relating to Vacuum Cleaners |
| ASTM F 420 | 真空吸塵器可伸入家具底部深度的標準測試方法 | Standard Test Method for Access Depth Under Furniture of Vacuum Cleaners |
| ASTM F 430 | 真空吸塵器過濾袋用紙的標準試驗方法 | Standard Test Methods for Paper Used for Vacuum Cleaner Filter Bags |
| ASTM F 431 | 真空吸塵器充氣室空氣動力性能測量用標準規范 | Standard Specification for Air Performance Measurement Plenum Chamber for Vacuum Cleaners |
| ASTM F 450 | 真空吸塵器軟管的耐熱性及可靠性的標準試驗方法 | Standard Test Methods for Vacuum Cleaner Hose - Durability and Reliability (Plastic Wire Reinforced) |
| ASTM F 486 | 真空吸塵器的使用和保養手冊的編制的標準規程 | Standard Practice for Preparation of Use and Care Booklets for Vacuum Cleaners |
| ASTM F 494 | 評價真空吸塵器原有一次性清潔袋完整性的標準試驗方法 | Standard Test Methods for Evaluating Primary Disposable Bag Integrity for Vacuum Cleaners |
| ASTM F 555 | 家用真空吸塵器的電動機壽命評定的標準試驗方法 | Standard Test Method for Motor Life Evaluation of an Upright Vacuum Cleaner |
| ASTM F 558 | 測定真空吸塵器的空氣性能特征的標準測試方法 | Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaners |
| ASTM F 595 | 真空吸塵器軟管的耐用性及可靠性試驗(全塑軟管)的標準試驗方法 | Standard Test Methods for Vacuum Cleaner Hose - Durability and Reliability (All-Plastic Hose) |
| ASTM F 608 | 家用/商用真空吸塵器去除地毯內藏污物的效果評定標準試驗方法 | Standard Test Method for Evaluation of Carpet Embedded Dirt Removal Effectiveness of Household/Commercial Vacuum Cleaners |
| ASTM F 655 | 真空吸塵器檢驗用試驗地毯和襯墊的標準規范 | Standard Specification for Test Carpets and Pads for Vacuum Cleaner Testing |
| ASTM F 820 | 測量中央真空吸塵系統的空氣性能特征的測試方法 | Test Method for Measuring Air Performance Characteristics of Central Vacuum Cleaning Systems |
| ASTM F 884 | 安裝在內部的(集中式)真空吸塵器的電動機壽命評定的標準試驗方法 | Standard Test Method for Motor Life Evaluation of a Built-In (Central Vacuum) Vacuum Cleaner |
| ASTM F 888 | 測量真空吸塵器中主要灰塵收集器的最大功能容積的標準試驗方法 | Standard Test Method for Measuring Maximum Function Volume of the Primary Dirt Receptacle in a Vacuum Cleaner |
| ASTM F 889 | 用真空降低技術表征達到一定技術水平的平面綜合特性的方法 | Test Method for Characterizing a Combination of Properties of Planar Surfaces to a Technical Level by a Vacuum Hold-Down Technique |
| ASTM/ISO 10079-3 | 醫療抽吸設備.第3部分:真空或壓力抽吸設備 | Medical Suction Equipment - Part 3: Suction Equipment Powered from a Vacuum or Pressure Source |
| IEEE C 62.32 | 低壓氣隙電涌保護器件(不包括真空管和沖出式器件)的試驗規范 | (Test specifications for low-voltage air gap surge-protective devices (excluding valve and expulsion type devices)) |
| UL 1017 | 真空吸塵器、鼓風式清潔器和家用地板整理機 | (Vacuum cleaners, blower cleaners, and household floor finishing machines ) |
| UL 1450 | 電動空氣壓縮機、真空泵和噴漆設備 | (Motor-operated air compressors, vacuum pumps, and painting equipment) |
| 編號 | 中文名稱 | 英文名稱 |