微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| EN 1012-1 | 壓縮機和真空泵 安全要求 第1部分：壓縮機 | Compressors and vacuum pumps - Safety requirements - Part 1: Compressors |
| EN 1012-2 | 壓縮機和真空泵 安全要求 第2部分：真空泵 | Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps |
| EN 1091 | 建筑物外真空排水系統 | Vacuum sewerage systems outside buildings |
| EN 12109 | 建筑物內的真空排水系統 | Vacuum drainage systems inside buildings |
| EN 12294 | 塑料管道系統 熱水和冷水系統 真空下氣密性的試驗方法 | Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum |
| EN 1251-1 | 低溫容器 不超過1000L容積的可運輸?shù)恼婵战^熱容器 第1部分：基本要求 | Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 1: Fundamental requirements |
| EN 1251-2 | 低溫容器 不超過1000L容積的可運輸?shù)恼婵战^熱容器 第2部分：設計、制造、檢驗和試驗 | Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2: Design, fabrication, inspection and testing |
| EN 1251-3 | 低溫容器 不超過1000L容積的可運輸?shù)恼婵战^熱容器 第3部分：操作要求 | Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 3: Operational requirements |
| EN 12546-1 | 與食品接觸的物品及材料 家用保溫容器 第１部分：真空器皿、保溫瓶和保溫壺規范 | Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Part 1: Specification for vacuum ware, insulated flasks and jugs |
| EN 12596 | 瀝青和瀝青膠粘劑 用真空毛細管法測定動態粘度 | Bitumen and bituminous binders - Determination of dynamic viscosity by vacuum capillary |
| EN 13160-2 | 檢漏系統 第2部分：:壓力和真空系統 | Leak detection systems - Part 2: Pressure and vacuum systems |
| EN 13348 | 銅和銅合金 醫用氣體或真空用無縫圓銅管 | Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum |
| EN 13458-1 | 低溫容器 靜態真空絕熱容器 第1部分：基本要求 | Cryogenic vessels - Static vacuum insulated vessels - Part 1: Fundamental requirements |
| EN 13458-2 | 低溫容器 靜態真空絕熱容器 第2部分：設計、制造、檢查和試驗 | Cryogenic vessels - Static vacuum-insulated vessels - Part 2: Design, fabrication, inspection and testing |
| EN 13458-3 | 低溫容器 靜態真空絕熱容器 第3部分：操作要求 | Cryogenic vessels - Static vacuum insulated vessels - Part 3: Operational requirements |
| EN 13530-1 | 低溫容器 可運輸大型真空絕熱容器 第1部分：基本要求 | Cryogenic vessels - Large transportable vacuum insulated vessels - Part 1: Fundamental requirements |
| EN 13530-2 | 低溫容器 可運輸大型真空絕熱容器 第2部分：設計、制造、檢查和試驗 | Cryogenic vessels - Large transportable vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing / Note: To be amended by EN 13530-2/prA1 (2003-07). |
| EN 13530-3 | 低溫容器 可運輸大型真空絕熱容器 第3部分：操作要求 | Cryogenic vessels - Large transportable vacuum insulated vessels - Part 3: Operational requirements |
| EN 13604 | 銅和銅合金 電子管、半導體器件和真空設備用高導電率銅產品 | Copper and copper alloys - Products of high conductivity copper for electronic tubes, semiconductor devices and vacuum applications |
| EN 14091 | 航天產品質量保證 航天材料篩屑的熱真空氣體釋放試驗 | Space product assurance - Thermal vacuum outgassing test for the screening of space materials |
| EN 14197-1 | 低溫容器 靜態非真空隔熱容器 第1部分：基本要求 | Cryogenic vessels - Static non-vacuum insulated vessels - Part 1: Fundamental requirements |
| EN 14398-1 | 低溫容器 大型運輸非真空保溫容器 第1部分：基本要求 | Cryogenic vessels - Large transportable non-vacuum insulated vessels - Part 1: Fundamental requirements |
| EN 14398-2 | 低溫容器 大型運輸非真空保溫容器 第2部分：設計、制造、檢查和試驗 | Cryogenic vessels - Large transportable non-vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing |
| EN 14398-3 | 低溫容器 大型運輸非真空保溫容器 第3部分：操作要求 | Cryogenic vessels - Large transportable non-vacuum insulated vessels - Part 3: Operational requirements |
| EN 3475-409 | 航空航天系列 飛行器用的電纜 試驗方法 第409部分：真空老化／注：適合與EN 3475-100結合使用 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 409: Air-excluded ageing / Note: Applies only in conjunction with EN 3475-100 |
| EN 50298 | 低壓開關和控制機構組件的真空箱 一般要求 | Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements |
| EN 60312-1998+A1 | 家用真空吸塵器 性能測試方法 | Vacuum cleaners for household use - Methods of measuring the performance (IEC 60312:1998) |
| EN 60335-2-2 | 家用和類似用途電器的安全 第2-2部分：真空吸塵器和吸水清潔電器的特殊要求 | Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances (IEC 60335-2-2:2002, modified) / Note: Endorsement notice |
| EN 60335-2-69 | 家用和類似用途電器的安全 第2-69部分：工業和商業用濕式和干式真空吸塵器（包括電動刷）的特殊要求 | Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for industrial and commercial use (IEC 60335-2-69:2002, modified) / Note: Endorsement notice |
| EN 60704-2-1 | 測定家用和類似電器發出的空氣傳播的噪聲的試驗規則 第2-1部分：真空吸塵器的特殊要求 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-1: Particular requirements for vacuum cleaners (IEC 60704-2-1:2000) / Note: Applies only in conjunction with EN 60704-1 (1997) |
| EN 737-1 | 醫療氣體管道系統 第1部分：壓縮醫療氣體和真空用終端設備 | Medical gas pipeline systems - Part 1: Terminal units for compressed medical gases and vacuum |
| EN 737-3-1998+A1-1999+AC | 醫療氣體管道系統 第3部分：壓縮醫療氣體和真空用管道 | Medical gas pipeline systems - Part 3: Pipelines for compressed medical gases and vacuum |
| EN 993-17 | 成形致密耐火制品的試驗方法 第17部分：真空汞法對顆粒狀材料松裝密度的測定 | Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vacuum |
| EN 993-18 | 成形致密耐火制品的試驗方法 第18部分：真空水法對顆粒狀材料松裝密度的測定 | Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum |
| EN ISO 10079-3 | 醫療吸引設備 第3部分：真空或用壓力驅動吸引設備 | Medical suction equipment - Part 3: Suction equipment powered from a vacuum or pressure source (ISO 10079-3:1999) |
| EN ISO 15364 | 船舶與海上技術 散貨船真空/壓力閥 | Ships and marine technology - Pressure/vacuum valves for cargo tanks (ISO 15364:2000) |
| EN ISO 1741 | 葡萄糖 干燥后質量損失的測定 真空烘箱法 | Dextrose - Determination of loss in mass on drying - Vacuum oven method (ISO 1741:1980) |
| EN ISO 7233 | 橡膠和塑料軟管和軟管組件 耐真空性能測定 | Rubber and plastics hoses and hose assemblies - Determination of suction resistance (ISO 7233:1991) |
| EN ISO 8028 | 真空噴涂漆用橡膠和／或塑料軟管和軟管組件 規范 | Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO 8028:1999) |
| ENV 737-6 | 醫療氣體管道系統 第6部分：壓縮醫療氣體和真空用終端部件用探針的尺寸 | Medical gas pipeline systems - Part 6: Dimensions and allocation of probes for terminal units for compressed medical gases and vacuum |
| prEN 12076 | 壓縮機和真空汞的噪聲發射的測量（工程法） | Measurement of noise emission from compressors and vacuum pumps (engineering method) |
| prEN 12456 | 低溫容器 真空絕熱低溫容器外套的壓力保護裝置 | Cryogenic vessels - Pressure protection devices for vacuum insulated cryogenic vessels outer jackets |
| prEN 14197-2 | 低溫容器 靜態非真空隔熱容器 第2部分：設計、制造、試驗和檢查 | Cryogenic vessels - Static non-vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing |
| prEN 14197-3 | 低溫容器 靜態非真空隔熱容器 第3部分：操作要求 | Cryogenic vessels - Static non-vacuum insulated vessels - Part 3: Operational requirements |
| prEN 1675 | 住宅內使用的非真空的冷水儲水池的規范 | Specification for cold water storage cisterns open to atmosphere for use within dwellings |
| prEN 2233 | 航空航天系列 真空熔化耐熱阻抗合金Ni-CD1701 (NiCo15Cr10Al6Ti5Mo3) 未經熱處理 精密鑄件a or D | Aerospace series - Heat resisting alloy Ni-CD1701 (NiCo15Cr10Al6Ti5Mo3) vacuum melted - Non heat treated - Precision casting - a or D 50 mm |
| prEN 2403 | 航空航天系列 真空熔化耐熱合金NI-CH2601 (NiCr19Fe19Nb5Mo3) 溶液處理和淀積處理 精密鑄造 a或D | Aerospace series - Heat resisting alloy NI-CH2601 (NiCr19Fe19Nb5Mo3) vacuum melted - Solution treated and precipitation treated - Precision casting - a or D 50 mm |
| prEN 2405 | 航空航天系列 真空熔化耐熱阻抗合金NI-CH2601 (NiCr19Fe19Nb5Mo3) 溶液處理和淀積處理 精密鑄造 D<(Ind | Aerospace series - Heat resisting alloy NI-PH2601 (NiCr19Fe19Nb5Mo3) solution treated and precipitation treated - Forgings - D<(Index)e> 200 mm |
| prEN 2407 | 航空航天系列 真空熔化耐熱阻抗合金NI-CH2601 (NiCr19Fe19Nb5Mo3) 溶液處理和淀積處理 薄板材、帶材和板 | Aerospace series - Heat resisting alloy NI-PH2601 (NiCr19Fe19Nb5Mo3) solution treated and precipitation treated - Sheet, strip and plate - 0,2 mm a 10 mm |
| prEN 3357 | 航空航天系列 真空感應熔煉和消耗電極再熔煉固溶處理和沉淀處理FE-PM1503 (X3CrNiMoAl13-8-2)鋼 機加工棒 | Aerospace series - Steel FE-PM1503 (X3CrNiMoAl13-8-2) vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D 150 mm - 1200 MPa R<(Index)m> 14 |
| prEN 3358 | 航空航天系列 真空感應熔煉和消耗電極再熔煉固溶處理和沉淀處理FE-PM1503 (X3CrNiMoAl13-8-2)鋼 機加工 | Aerospace series - Steel FE-PM1503 (X3CrNiMoAl13-8-2) vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D 150 mm - Rm≥ 1400 MPa |
| prEN 3359 | 航空航天系列 真空感應熔煉和消耗電極再熔煉固溶處理和沉淀處理軟化的FE-PM1503 (X3CrNiMoAl13-8-2)鋼 鍛 | Aerospace series - Steel FE-PM1503 (X3CrNiMoAl 13-8-2) vacuum induction melted and consumable electrode remelted - Softened - Forging stock - a or D 300 mm |
| prEN 3470 | 航空航天系列 真空感應熔煉和消耗電極再熔化固溶處理和沉淀處理FE-PM1503 (X3CrNiMoAl13-8-2)鋼 鍛件a 或 | Aerospace series - Steel FE-PM1503 (X3CrNiMoAl13-8-2) vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D 150 mm - 1200 MPa R<(Index)m> 1400 MPa |
| prEN 3511 | 航空航天系列 FE-PL1801 (100Cr6)真空感應熔煉和的消耗熔化電極再熔鋼 軟化的、機加工軸承制造用棒材a或 | Aerospace series - Steel FE-PL1801 (100Cr6); vacuum induction melted and consumable electrode remelted - Softened - Bar for the manufacture of machined bearings - a or D 130 mm |
| prEN 3512 | 航空航天系列 FE-PL1801 (100Cr6)真空感應熔煉和消耗電極調質的鋼 軸承制造商用空芯棒3,5 mm ≤ 55 mm | Aerospace series - Steel FE-PL1801 (100Cr6); vacuum induction melted and consumable electrode remelted - Hardened and tempered - Hollow bars for the manufacturer of bearings - 3,5 mm a 55 mm |
| prEN 3529 | 航空航天系列 FE-PM2701 (X2NiCoMo18-8-5)真空感應熔煉和真空電弧再熔煉固溶處理和沉淀處理鋼 鍛件 a 或 | Aerospace series - Steel FE-PM2701 (X2NiCoMo18-8-5); vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Forgings - a or D 150 mm - 1750 MPa R<(Index)m> 2000 MPa |
| prEN 3531 | 航空航天系列 FE-PM2701 (X2NiCoMo18-8-5)真空感應熔煉和真空電弧再熔煉固溶處理和沉淀處理鋼 薄板和帶 | Aerospace series - Steel FE-PM2701 (X2NiCoMo18-8-5); vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Sheet and strip - a 6 mm - 1750 MPa R<(Index)m> 2000 MPa |
| prEN 3532 | 航空航天系列 FE-PM2701 (X2NiCoMo18-8-5)真空感應熔煉和真空電弧再熔煉固溶處理和沉淀處理 板6 mm≤a≤ | Aerospace series - Steel FE-PM2701 (X2NiCoMo18-8-5); vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Plate - 6 mm a 40 mm - 1750 MPa R<(Index)m> 2000 MPa |
| prEN 4088 | 航空航天系列 真空感應熔煉和真空電弧再熔、滲碳變硬的零下處理和回火的FE-PL5101 (13MoCrNiV4-4-3-1)鋼 | Aerospace series - Steel FE-PL5101 (13MoCrNiV4-4-3-1) vacuum induction melted and vacuum arc remelted, carburized, hardened, sub-zero treated and tempered - Bar for machining D<(Index)e> 30 mm, 1315 MPa R<(Index)m> 165 |
| prEN 4089 | 航空航天系列 真空感應熔煉和真空電弧再熔、軟化FE-PL5101 (13MoCrNiV4-4-3-1)鋼 鍛坯a 或 D≤150 mm | Aerospace series - Steel FE-PL5101 (13MoCrNiV4-4-3-1) vacuum induction melted and vacuum arc remelted, softened - Forging stock a or D 150 mm |
| prEN 4090 | 航空航天系列 真空感應熔煉和真空電弧再熔、滲碳變硬的零下處理和回火FE-PL5101 (13MoCrNiV4-4-3-1)鋼 鍛 | Aerospace series - Steel FE-PL5101 (13MoCrNiV4-4-3-1) vacuum induction melted and vacuum arc remelted, carburized, hardened, sub-zero treated and tempered - Forgings D<(Index)e> 30 mm, 1315 MPa R<(Index)m> 1650 MPa |
| prEN 4092 | 航空航天系列 空氣熔煉和真空精煉 退火耐熱合金 NI-PH3901 (NiCr25Mo10) 薄板和帶材0,25 mm≤a≤3 mm | Aerospace series - Heat resisting alloy NI-PH3901 (NiCr25Mo10) - Air melted and vacuum refined - Annealed - Sheet and strip 0,25 mm a 3 mm |
| prEN 4093 | 航空航天系列 空氣熔煉和真空精煉 退火耐熱合金 NI-PH3901 (NiCr25Mo10) 薄板和帶材 a ≥3 mm | Aerospace series - Heat resisting alloy NI-PH3901 (NiCr25Mo10) - Air melted and vacuum refined - Annealed - Sheet, strip and plate a ≥ 3 mm |
| prEN 4094 | 航空航天系列 真空熔煉非熱處理Ni-CH1305 (NiCr16Co10Mo8Al4Ti4)耐熱合金 再熔料 | Aerospace series - Heat resisting alloy Ni-CH1305 (NiCr16Co10Mo8Al4Ti4) vacuum melted, non heat treated - Remelting stock |
| prEN 4095 | 航空航天系列 真空熔煉非熱處理Ni-CH1305 (NiCr16Co10Mo8Al4Ti4)耐熱合金 精密鑄件 | Aerospace series - Heat resisting alloy Ni-CH1305 (NiCr16Co10Mo8Al4Ti4) vacuum melted, non heat treated - Precision castings |
| prEN 4096 | 航空航天系列 真空熔煉非熱處理Ni-CD1401 (NiCo10W10Cr9Al6Ta3)耐熱合金 再熔料 | Aerospace series - Heat resisting alloy Ni-CD1401 (NiCo10W10Cr9Al6Ta3) vacuum melted, non heat treated - Remelting stock |
| prEN 4097 | 航空航天系列 真空熔煉沉淀處理Ni-CD1401 (NiCo10W10Cr9Al6Ta3)耐熱合金 精密鑄件 | Aerospace series - Heat resisting alloy Ni-CD1401 (NiCo10W10Cr9Al6Ta3) vacuum melted, precipitation treated - Precision castings |
| prEN 4222 | 航空航天系列 耐熱合金 NI-PH1305 (NiCr22Co13Mo9Al1) 空氣熔煉和真空精煉 退火 薄板和帶0,25 mm≤a≤3 | Aerospace series - Heat resisting alloy NI-PH1305 (NiCr22Co13Mo9Al1) - Air melted and vacuum refined - Annealed - Sheet and strip 0,25 mm a 3 mm |
| prEN 4346 | 航空航天系列 FE-PM1505 (X1CrNiMoAlTi12-9-2) 真空感應熔煉和消耗電極再熔煉軟化的鋼 鍛坯a 或D≤300 | Aerospace series - Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted - Softened - Forging stock a or D 300 mm |
| prEN 4347 | 航空航天系列 FE-PM1506 (X3CrNiMoAl13-8-2)真空感應熔煉和再消耗電極再熔煉軟化的鋼 鍛坯a 或D≤300 mm | Aerospace series - Steel FE-PM1506 (X3CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Softened - Forging stock a or D 300 mm |
| prEN 4461 | 航空航天系列 FE-PM1506（X5CrNiMoAl13-8-2）鋼 真空感應熔煉和自耗電極再熔煉 溶解處理和沉淀處理 桿 | Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2); vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D 150 mm - Rm≥ 1200 MPa |
| prEN 4462 | 航空航天系列 FE-PM1506（X5CrNiMoAl13-8-2）鋼 真空感應熔煉和自耗電極再熔煉 固溶處理和沉淀處理 桿 | Aerospace series - Steel FE-PM1506 (X5CrNiMoAlTi13-8-2); vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D 150 mm - Rm≥ 1300 MPa |
| prEN 4463 | 航空航天系列 FE-PM1506（X5CrNiMoAl13-8-2）鋼 真空感應熔煉和自耗電極再熔煉 固溶處理和沉淀處理 桿 | Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2); vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D 150 mm - Rm≥ 1400 MPa |
| prEN 4464 | 航空航天系列 FE-PM1506（X5CrNiMoAl13-8-2）鋼 真空感應熔煉和自耗電極再熔煉 固溶處理和沉淀處理 鍛 | Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2); vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D 150 mm - Rm≥ 1200 MPa |
| prEN 4465 | 航空航天系列 FE-PM1506（X5CrNiMoAl13-8-2）鋼 真空感應熔煉和自耗電極再熔煉 固溶處理和沉淀處理 鍛 | Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2); vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D 150 mm - Rm≥ 1300 MPa |
| prEN 4466 | 航空航天系列 FE-PM1506（X5CrNiMoAl13-8-2）鋼 真空感應熔煉和自耗電極再熔煉 固溶處理和沉淀處理 鍛 | Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2); vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D 150 mm - Rm≥ 1400 MPa |
| prEN 4467 | 航空航天系列 FE-PM1505（X1CrNiMoAlTi12-9-2）鋼 真空感應熔煉和自耗電極再熔煉 固溶處理和沉淀處理 | Aerospace series - Steel FE-PM1505 (X1CrNiMoAlTi12-9-2); vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D 150 mm - Rm≥ 1200 MPa |
| prEN 4468 | 航空航天系列 FE-PM1505（X1CrNiMoAlTi12-9-2）鋼 真空感應熔煉和自耗電極再熔化 溶解處理和沉淀處理 | Aerospace series - Steel FE-PM1505 (X1CrNiMoAlTi12-9-2); vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D 150 mm - Rm≥ 1300 MPa |
| prEN 4469 | 航空航天系列 FE-PM1505（X1CrNiMoAlTi12-9-2）鋼 真空感應熔煉和自耗電極再熔煉 固熱處理和沉淀處理 | Aerospace series - Steel FE-PM1505 (X1CrNiMoAlTi12-9-2); vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D 150 mm - Rm≥ 1300 MPa |
| prEN 4470 | 航空航天系列 FE-PM1505（X1CrNiMoAlTi12-9-2）鋼 真空感應熔煉和自耗電極再熔煉 固溶處理和沉淀處理 | Aerospace series - Steel FE-PM1505 (X1CrNiMoAlTi12-9-2); vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D 150 mm - Rm≥ 1200 MPa |
| prEN 4471 | 航空航天系列 FE-PM1505（X1CrNiMoAlTi12-9-2）鋼 真空感應熔煉和自耗電極再熔煉 固熱處理和沉淀處理 | Aerospace series - Steel FE-PM1505 (X1CrNiMoAlTi12-9-2); vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D 150 mm - Rm≥ 1300 MPa |
| prEN 4472 | 航空航天系列 FE-PM1505（X1CrNiMoAlTi12-9-2）鋼 真空感應熔煉和自耗電極再熔煉 固溶處理和沉淀處理 | Aerospace series - Steel FE-PM1505 (X1CrNiMoAlTi12-9-2); vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D 150 mm - Rm≥ 1400 MPa |
| prEN 4566 | 航空航天系列 CO-PH4101（CoCr20W15Ni）耐熱合金 真空感應熔煉 固溶處理 鍛件 De ≤100 mm | Aerospace series - Heat resisting alloy CO-PH4101 (CoCr20W15Ni) - Vacuum melted - Solution treated - Forgings - D<(Index)e> 100 mm |
| prEN 4567 | 航空航天系列 CO-PH4101（CoCr20W15Ni）耐熱合金 真空感應熔煉 固溶處理 桿和型材 a或D ≤100 mm | Aerospace series - Heat resisting alloy CO-PH4101 (CoCr20W15Ni) - Vacuum melted - Solution treated - Bar and section - a or D 100 mm |
| prEN 4568 | 航空航天系列 CO-PH4101（CoCr20W15Ni）耐熱合金 真空感應熔煉 固溶處理 薄板和帶材 a≤6 mm | Aerospace series - Heat resisting alloy CO-PH4101 (CoCr20W15Ni) - Vacuum melted - Solution treated - Sheet and strip - a 6 mm |
| prEN 4569 | 航空航天系列 CO-PH4101（CoCr20W15Ni）耐熱合金 真空感應熔煉 固溶處理 線材 D≤4 mm | Aerospace series - Heat resisting alloy CO-PH4101 (CoCr20W15Ni) - Vacuum melted - Solution treated - Wire - D 4 mm |
| prEN 746-7 | 工業熱處理設備 第7部分：真空熱處理設備的特殊安全要求 | Industrial thermoprocessing equipment - Part 7: Special safety requirements for vacuum thermoprocessing equipment |
| prEN ISO 15749-3 | 船舶和造船技術 船和海上構筑物上排水系統 第3部分：生活污水排水、排水管的真空抽吸系統 | Ships and marine technology - Drainage systems on ships and marine structures - Part 3: Sanitary drainage, drain piping for vacuum system (ISO/DIS 15749-3:2001) |
| 編號 | 中文名稱 | 英文名稱 |