微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ANSI B11.15 | 管道和型材彎曲機的制造、維護和使用的安全要求 | Pipe, Tube, and Shape Bending Machines, Safety Requirements for Construction, Care, and Use |
| ANSI GPTC Z 380.1 1998 Addendum 3 | 燃?xì)鈧鬏敽头峙涔艿老到y(tǒng)指南 1998 | Guide for Gas Transmission and Distribution Piping Systems 1998 |
| ANSI LC-1 | 使用波紋不銹鋼管(CSST)的燃?xì)夤艿老到y(tǒng) | Fuel Gas Piping System Using Corrugated Stainless Steel Tubing (CSST) (same as CSA 6.26) |
| ANSI Man "D"/ACCA 1 | 住宅管道的設計 | Residential Duct Design |
| ANSI Man"D"/ACCA 1 | 住宅管道設計 | Residential Duct Design |
| ANSI Z83.8 | 氣體裝置加熱器和燃?xì)夤艿罓t | Gas Unit Heaters and Gas-Fired Duct Furnaces (same as CGA 2.6) |
| ANSI/ACCA ManJ 2 Addendum C | MJB的管道阻力增益/損失修訂版 | Duct Gain/Loss Revisions to MJ8 |
| ANSI/API 1104 | 管道和相關設施的焊接 | Welding of Pipelines and Related Facilities |
| ANSI/API 1160 | 危險液體管道的管理系統完整性 | Managing System Integrity for Hazardous Liquid Pipeline |
| ANSI/API 570 | 管路檢驗規程.工作中管道系統的檢查、修理、更替及核定(第2版、含修改件1) | Piping Inspection Code - Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems (Second Edition, Including Addendum 1) |
| ANSI/API RP1162 | 管道操作者的公共注意項 | Public Awareness Programs for Pipeline Operators |
| ANSI/API RP5A 5 | 新套管、管道和平端鉆管的現場檢驗.第7版 | Field Inspection of New Casing, Tubing, and Plain-End Drill Pipe, 7th Edition |
| ANSI/API SPEC17E | 水下臨時管道及電纜規范 | Specification for Subsea Umbilicals |
| ANSI/ASAE S376.2 | 地下熱塑性塑料灌溉管道的設計、安裝和性能 | Design, Installation, and Performance of Underground Thermoplastic Irrigation Pipelines |
| ANSI/ASHRAE 130 | 評定管道式空氣終端裝置的測試方法 | Methods of Testing for Rating Ducted Air Terminal Units |
| ANSI/ASHRAE/SMACNA 126 | HVAC空氣管道的試驗方法 | Methods of Testing HVAC Air Ducts |
| ANSI/ASME A112.1.2 | 管道系統中的氣隙 | Air Gaps in Plumbing Systems |
| ANSI/ASME A112.18.1 | 衛生管道配件 | Plumbing Fixture Fittings |
| ANSI/ASME A112.18.2 | 衛生管道用污水管配件 | Plumbing Fixture Waste Fittings |
| ANSI/ASME A112.19.2 | 抽水馬桶與小便池水的釉瓷管道裝配和水壓要求 | Vitreous China Plumbing Fixtures and Hydraulic Requirements for Water Closets and Urinals |
| ANSI/ASME A112.20.1 | 高純度管道系統安裝工的資格鑒定 | Qualification of Installers of High Purity Piping Systems |
| ANSI/ASME A112.20.2 | 管道系統用擋火物系統和設備的安裝工資格鑒定 | Qualification of Installers of Firestop Systems and Devices for Piping Systems |
| ANSI/ASME A112.4.14 | 衛生管道系統中使用的手動直角轉彎截止閥 | Manually Operated, Quarter-Turn Shutoff Valves for Use in Plumbing Systems |
| ANSI/ASME A112.6.1M | 公共用離開地面的管道工程裝置的支架 | Supports for Off-the-Floor Plumbing Fixtures for Public Use |
| ANSI/ASME A13.1 | 管道系統識別圖解 | Scheme for the Identification of Piping Systems |
| ANSI/ASME B16.33 | 125表壓及以下的氣體管道系統中使用的手動金屬氣體閥 | Manually Operated Metallic Gas Valves for Use in Gas Piping Systems up to 125 psig |
| ANSI/ASME B16.44 | 家用管道系統中使用的手工操作的金屬氣體閥門 | Manually Operated Metallic Gas Valves for Use in House Piping Systems |
| ANSI/ASME B16.44a | 家庭管道系統中用手動金屬氣閥 | Manually Operated Metallic Gas Valves for Use in House Piping Systems |
| ANSI/ASME B31.1 | 動力管道 | Power Piping |
| ANSI/ASME B31.11 | 泥漿輸送管道系統 | Slurry Transportation Piping Systems |
| ANSI/ASME B31.1a | 動力管道 | Power Piping |
| ANSI/ASME B31.1b | 動力管道 | Power Piping |
| ANSI/ASME B31.5 | 制冷管道 | Refrigeration Piping |
| ANSI/ASME B31.8 | 氣體輸送和分配管道系統 | Gas Transmission and Distribution Piping Systems |
| ANSI/ASME B31.8S | 燃?xì)夤艿赖墓芾硐到y(tǒng)完整性 | Managing System Integrity of Gas Pipelines |
| ANSI/ASME B31.9 | 建筑物服務設施用壓力管道標準 | Building Services Piping Code for Pressure Piping |
| ANSI/ASME B31G | 測定銹蝕管道殘留強度的手冊 | Manual for Determining the Remaining Strength of Corroded Pipelines |
| ANSI/ASME B32.5 | 除管道外管狀金屬產品的最優米制尺寸 | Tubular Metal Products Other Than Pipe, Preferred Metric Sizes for |
| ANSI/ASME MFC-16M | 用電磁流量儀測量封閉管道中液體流量 | Measurement of Fluid Flow in Closed Conduits by Means of Electromagnetic Flowmeters |
| ANSI/ASME MFC-18M | 用可變面積計量計測量管道中的液體流量 | Measurement of Fluid Flow in Pipes Using Variable Area Meters |
| ANSI/ASME MFC-3M-1 | 用孔板、噴嘴和文杜利流量計測量管道中液體流量.第1部分:總則 | Measurement of fluid Flow in Pipes Using Orifice, Nozzle, and Venturi-Part 1-General |
| ANSI/ASME MFC-3M-2 | 用孔板、噴嘴和文杜利流量計測量管道中液體流量.第2部分:孔板 | Measurement of fluid Flow in Pipes Using Orifice, Nozzle, and Venturi-Part 2-Orifice Plates |
| ANSI/ASME MFC-3M-3 | 用孔板、噴嘴和文杜利流量計測量管道中液體流量.第3部分:噴嘴和文杜利噴嘴 | Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi-Part 3 - Nozzles and Venturi Nozzles |
| ANSI/ASME MFC-3M-4 | 用孔板、噴嘴和文杜利流量計測量管道中液體流量.第4部分:文杜利流量計 | Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi - Part 4 - Venturi Meters |
| ANSI/ASME MFC-5M | 用過渡時間超聲流量計測量密封管道中的液體流量 | Liquid Flow in Closed Conduits Using Transit-Time Ultrasonic Flow Meters, Measurement of |
| ANSI/ASME MFC-6M | 用渦流流量計測量管道中的液體流量 | Fluid Flow in Pipes Using Vortex Flow Meters, Measurement of |
| ANSI/ASSE 1001 | 應用管道的大氣式真空制動器 | Pipe-Applied Atmospheric-Type Vacuum Breakers |
| ANSI/ASSE 1051 | 污水管道系統用氣體導入閥 | Air Admittance Valves for Plumbing Drainage Systems |
| ANSI/ASTM D1599 | 塑料管材、管道和管件短時液壓故障壓力試驗方法 | Test Method for Short-Time Hydraulic Failure Pressure of Plastic Pipe, Tubing, and Fittings |
| ANSI/ASTM D2235 | ABS塑料管道和配件用液狀粘固劑規范 | Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings |
| ANSI/ASTM D2564 | 聚氯乙烯塑料管道系統用液狀粘固劑規范 | Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems |
| ANSI/ASTM D2680 | ABS和PVC復合管道規范 | Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping |
| ANSI/ASTM D2837 | 獲得熱塑性管道材料靜水壓設計基數的試驗方法 | Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials |
| ANSI/ASTM D3138 | 丙烯腈-丁二烯-苯乙烯共聚物和聚氯乙烯無壓管道系統構件之間轉換接頭用液狀粘固劑規范 | Specification for Solvent Cements for Transition Joints between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components |
| ANSI/ASTM D3261 | 聚乙烯塑料管材和管道用對接熱融合聚乙烯塑料管件規范 | Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing |
| ANSI/ASTM D4396 | 非承壓管道(X-15-358)用硬質聚氯乙烯(PVC)和相關塑料化合物規范(08.04) | Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related Plastic Compounds for Non-Pressure Piping Products (X-15-358) (08.04) |
| ANSI/ASTM D5926 | 水、廢水和排氣(DWV)、下水道、衛生設施和暴雨管道系統用聚氯乙烯墊圈的規范 | Specification for Poly(Vinyl Chloride) (PVC) Gaskets for Drain, Waste and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems |
| ANSI/ASTM D6070 | 預組裝電線和電纜用光壁可盤繞聚乙烯(PE)管道物理特性試驗方法 | Test Methods for Physical Properties of Smooth-Wall, Coilable Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable |
| ANSI/ASTM E2231 | 防火焰擴散和隔煙管道和導管隔離層的安裝和樣品制備的標準實施規范 | Standard Practice on Specimen Preparation and Mounting for Pipe and Duct Insulation for Flame Spread and Smoke Obscuration |
| ANSI/ASTM F1006 | 船用管道裝置用液滴分離器規范 | Specification for Entrainment Separators for Use in Marine Piping Applications |
| ANSI/ASTM F1007 | 船用套裝滑動型管道膨脹節規范 | Specification for Pipe-Line Expansion Joints of the Packed Slip Type for Marine Application |
| ANSI/ASTM F1025 | 加強或修補聚乙烯氣體承壓管道孔洞用全環繞型帶夾選用導則 | Guide for Selection and Use of Full-Encirclement-Type Band Clamps for Reinforcement or Repair of Punctures or Holes in Polyethylene Gas Pressure Pipe |
| ANSI/ASTM F1057 | 利用熱循環技術評估壓塑聚乙烯(PVC)管道質量的實施規程 | Practice for Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC) Pipe by the Heat Reversion Technique |
| ANSI/ASTM F1120 | 管道設備用環形金屬波紋膨脹連接件的規范 | Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications |
| ANSI/ASTM F1155 | 管道系統材料的選擇和應用規范 | Practice for Selection and Application of Piping System Materials |
| ANSI/ASTM F1201 | 0oF以上的管道設備中流體調節器配件的規范 | Specification for Fluid Conditioner Fittings in Piping Applications Above 0oF |
| ANSI/ASTM F1365 | 采用柔性合成橡膠密封件的塑料地下管道接頭耐水滲透性試驗方法 | Test Method for Water Infiltration Resistance of Plastic Underground Conduit Joints which Use Flexible Elastomeric Seals |
| ANSI/ASTM F1417 | 使用低壓空氣對塑料自流排水管道進行安裝驗收的試驗方法 | Test Method for Installation Acceptance of Plastic Gravity Sewer Lines Using Low Pressure Air |
| ANSI/ASTM F1429 | 用柔性合成橡膠密封件固定在套桶中的塑料地下管道接頭組合力試驗方法 | Test Method for Assembly Force of Plastic Underground Conduit Joints that Use Flexible Elastomeric Seals Located in the Bell |
| ANSI/ASTM F1476 | 管道設帶襯墊的機械連接件性能規范 | Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications |
| ANSI/ASTM F1548 | 管道設備帶襯墊的機械連接件配件性能規范 | Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications |
| ANSI/ASTM F1563 | 聚乙烯(PE)燃?xì)夤艿罃D壓工具規范 | Specification for Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing |
| ANSI/ASTM F1697 | 聚氯乙烯 (PVC) 排污管道和配件規范 | Specification for Poly (Vinyl Chloride) (PVC) Drain, Waste and Pipe and Fittings |
| ANSI/ASTM F1698 | 現有排污管和管道修復用聚氯乙烯管線襯里和水泥薄漿安裝慣例 | Practice for Installation of Poly (Vinyl Chloride) (PVC) Linear and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits |
| ANSI/ASTM F1735 | 修復現有的人可進入的污水管道用PVC襯里的聚氯乙烯(PVC)異型帶材規范 | Specification for Poly (Vinyl Chloride)(PVC) Profile Strip for PVC Liner for Rehabilitation of Existing Man-Entry Sewers and Conduits |
| ANSI/ASTM F1741 | 現有排水管和管道修復用機械螺旋纏繞聚氯乙烯(PVC)內襯管安裝的實施規程 | Practice for Installation of Machine Spiral Wound Poly Vinyl Chloride (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits |
| ANSI/ASTM F1743 | 通過現場硫化熱固性樹脂管的現場拉入安裝對已有管道進行修復的操作規程 | Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-place Installation of Cured-in-place Thermosetting Resin Pipe (CIPP) |
| ANSI/ASTM F1871 | 現有排污管和管道修復用波紋狀/形成聚氯乙烯管道形狀規范 | Specification for Folded/formed Poly (Vinyl Chloride) Pipe Type a for Existing Sewer and Conduit Rehabilitation |
| ANSI/ASTM F1901 | 屋頂排水系統用聚乙烯管道和配件規范 | Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems |
| ANSI/ASTM F1924 | 外徑可控的聚乙烯供氣管道用塑料機械配件規范 | Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing |
| ANSI/ASTM F1947 | 折疊式聚氯乙烯管(PVC)裝進現有污水管和下水管道中的實施規程 | Practice for Installation of Folded Poly(Vinyl Chloride) (PVC) Pipe into Existing Sewers and Conduits |
| ANSI/ASTM F1962 | 包括渡口在內的障礙物下安放聚乙烯管道時最大水平方向打眼指南 | Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings |
| ANSI/ASTM F2014 | 管道非增強擠制T形接頭規范 | Specification for Non-Reinforced Extruded Tee Connections for Piping Applications |
| ANSI/ASTM F2019 | 將玻璃纖維增強塑料(GRP)現場硫化熱固性樹脂管(CIPP)現場拖拉并安裝進已有管道的操作規程 | Practice for Existing Pipelines and Conduits by the Pulled-in-Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP) |
| ANSI/ASTM F2145 | 外徑可控聚酰胺11管及管道系統用聚酰胺11(Pa11)機械配件規范(60-01-02) | Specification for Polyamide11 (Pa11) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide11 Pipe and Tubing (60-01-02) |
| ANSI/ASTM F2159 | SDR9交聯聚乙烯(PEX)管道用帶銅夾緊環固的嵌入式塑料配件規范 | Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-Linked Polyethylene (PEX) Tubing |
| ANSI/ASTM F2164 | 采用液壓法進行聚乙烯壓力管道系統場漏試驗的慣例 | Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Hydrostatic Pressure |
| ANSI/ASTM F2176 | 聚乙烯管道及內管道用機械連接件規范 | Specification for Mechanical Couplings Used on Polyethylene Conduit, Duct and Innerduct |
| ANSI/ASTM F2207 | 住宅金屬輸氣管道襯里系統現場修復規范 | Specification for Cured-in-place Pipe Lining System for Rehabilitation of Metallic Gas Pipes |
| ANSI/ASTM F2389 | 額定壓力聚丙烯管道系統標準規范 | Specification for Pressure-rated Polypropylene Pp Piping Systems |
| ANSI/ASTM F2402 | 與醫療氣體管道系統終端裝置相連的流量測量裝置.采用ISO 15002作為美國國家標準(有所偏差) | Flow-metering Devices for Connection to Terminal Units of Medical Gas Pipeline Systems, Adoption of ISO 15002 as an American National Standard (with Deviations) |
| ANSI/ASTM F2509 | 外徑可控的聚乙烯配氣管和管道上用的現場組合Anoddeless Riser成套器具的規范 | Specification for Field-assembled Anoddeless Riser Kits for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing |
| ANSI/ASTM F409 | 可拆卸更換的熱塑性塑料管及管道配件的規范 | Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings |
| ANSI/ASTM F628 | 帶泡沫填充料的(ABS)40號塑料排污和通風管道規范 | Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe with a Cellular Core |
| ANSI/ASTM F645 | 熱塑性水壓管道系統的選定、設計和安裝指南 | Guide for Selection, Design, and Installation of Thermoplastic Water Pressure Piping Systems |
| ANSI/ASTM F683 | 管道和機械隔熱的選定和應用實施規程 | Practice for Selection and Application of Thermal Insulation for Piping and Machinery |
| ANSI/ASTM F689 | 測定內壁金屬鑄件塑料氣壓管道地面溫度慣例 | Practice for Determination of the Temperature of Above-Ground Plastic Gas Pressure Pipe within Metallic Casings |
| ANSI/ASTM F690 | 熱塑壓力管道灌溉系統地下安裝慣例 | Practice for Underground Installation of Thermoplastic Pressure Piping Irrigation Systems |
| ANSI/ASTM F704 | 管道系統法蘭接頭用螺栓長度的選用慣例 | Practice for Selecting Bolting Lengths for Piping System Flanged Joints |
| ANSI/ASTM F708 | 硬質管道支架的設計與安裝慣例 | Practice for Design and Installation of Rigid Pipe Hangers |
| ANSI/ASTM F721 | 標準管道組裝件的規范 | Specification for Gage Piping Assemblies |
| ANSI/ASTM F722 | 船上管道系統用焊接接頭規范 | Specification for Welded Joints for Shipboard Piping Systems |
| ANSI/ASTM F725 | 熱塑性管道和配件標準中沖擊試驗要求起草規程 | Practice for Drafting Impact Test Requirements in Thermoplastic Pipe and Fittings Standards |
| ANSI/ASTM F758 | 高速公路、機場和類似場所排水系統用光滑壁聚氯乙烯(PVC) 塑料管道系統規范 | Specification for Smooth-Wall Poly (Vinyl Chloride) (PVC) Plastic Underdrain Systems for Highway, Airport, and Similar Drainage |
| ANSI/ASTM F771 | 聚乙烯(PE)熱塑性高壓灌溉管道系統規范 | Specification for Polyethylene (PE) Thermoplastic High-Pressure Irrigation Pipeline Systems |
| ANSI/ASTM F891 | 具有蜂窩式芯的復合聚氯乙烯(PVC)塑料管道的規范 | Specification for Coextruded Poly (Vinyl Chloride) (PVC) Plastic Pipe with a Cellular Core |
| ANSI/ASTM F948 | 固定流體內壓下塑料管道系統和組件失效時間-試驗方法 | Test Method for Time-to-Failure of Plastic Piping Systems and Components under Constant Internal Pressure with Flow |
| ANSI/AWS B2.1-1-201 | 主要用于管道的、在焊接條件下、(M-1/P-1/S-1,1或2組)1/8到3/4英寸厚、E6010(垂直向上)及E7018(垂直向上)碳 | Standard Welding Procedure Specification (WPS) for Shielded Metel Arc Welded of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 3/4 inch Thick, E6010 (Vertical Uphill) followed by E7018 (Vertical Uphill), As-Welded Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-1-202 | 主要用于管道的、在焊接條件下(M-1/P-1/S-1,1或2組)1/8到3/4英寸厚、E6010(垂直向下)及E7018(垂直向上)碳鋼 | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 3/4 inch Thick, E6010 (Vertical Downhill) followed by E7018 (Vertical Uphill), As-Welded Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-1-203 | 主要用于管道的、在焊接條件下(M-1/P-1/S-1,1或2組)1/8到3/4英寸厚、E6010(垂直向上)碳鋼的藥皮焊條電弧焊 | Standard Welding Procedure Specification (WPS) for Shieldied Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 though 3/4 inch Thick, E6010 (Vertical Uphill), As-Welded Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-1-204 | 主要用于管道的、在焊接條件下(M-1/P-1/S-1,1或2組)1/8到3/4英寸厚、E6010碳鋼的藥皮焊條電弧焊的標準焊接 | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 3/4 inch Thick, E6010 (Vertical Downhill Root with the Balance Vertical Uphill), As-Welded Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-1-205 | 主要用于管道的、在焊接或PWHT條件下(M-1/P-1/S-1,1或2組)1/8到1-1/2英寸厚、E6010(垂直向上)及E7018(垂直 | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, E6010 (Vertical Uphill), Followed by E7018 (Vertical Uphill), As-Welded or PWHT Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-1-206 | 主要用于管道的、在焊接或PWHT條件下(M-1/P-1/S-1,1或2組)1/8到1-1/2英寸厚、E6010(垂直向下)及E7018(垂直 | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, E6010 (Vertical Downhill), Followed by E7018 (Vertical Uphill), As-Welded or PWHT Condition, Primarily Pipe Applications. |
| ANSI/AWS B2.1-1-207 | 主要用于管道的、在焊接或PWHT條件下(M-1/P-1/S-1,1或2組)1/8到1-1/2英寸厚、ER70S-2碳鋼的鎢極電弧焊的標 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, ER70S-2, As Welded or PWHT Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-1-208 | 主要用于管道的在焊接或PWHT條件下(M-1/P-1/S-1,1或2組)1/8到1-1/2英寸厚、E7018碳鋼的藥皮焊條電弧焊的標 | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P -1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, E7018, As-Welded or PWHT Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-1-209 | 主要用于管道的、在焊接或PWHT條件下、(M-1/P-1/S-1,1或2組)1/8到1-1/2英寸厚、ER70S-2及E7018碳鋼的藥皮焊 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1 /8 through 1-1/2 inch Thick, ER70S-2 and E7018, As-Welded or PWHT Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-1-210 | 標準焊接程序規范(WPS).主要用于管道的、在焊接或PWHT條件下、(M-1/P-1/S-1,1或2組)1/8到1-1/2英寸厚、INMS | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding with Consumable Inserts of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, INMs-1 and ER70S-2, As-Welded or PWHT Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-1-211 | 標準焊接程序規范(WPS).主要用于管道的、在焊接或PWHT條件下、(M-1/P-1/S-1,1或2組)1/8到1-1/2英寸厚、INMS | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding with Consumable Inserts Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, INMs-1, ER70S-2, and E7018, As-Welded or PWHT Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-1/8-228 | 碳鋼與奧氏體不銹鋼屏蔽金屬電弧焊(從M-1/P-1/S-1,組1或組2焊接到M-8/P-8/S-8, 組1)1/8到1-1/2英寸厚,ER309 | Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1/P-1/S-1 Groups 1 and 2 Welded to M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 inch thick, ER309-15, 16 or, 17, As-Welded Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-1/8-229 | 碳鋼與奧氏體不銹鋼氣體鎢電弧焊(從M-1/P-1/S-1,組1或組2焊接到M- 8/P-8/S-8, 組1)1/8到1-1/2英寸厚ER30 | Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Carbon Steel to Austenitic Stainless Steel (M-1/P-1/S-1 Groups 1 and 2 Welded to M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 inch thick, ER309 and E309-15, 16, or 17, As-Welded Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-1/8-230 | 氣體保護鎢極弧焊的標準焊接程序規范(WPS),可熔嵌入根部的,碳鋼與奧氏體不銹鋼(M-1/P-1/S-1, 組 1 和 2 焊 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding, with Consumable Insert Root, of Carbon Steel to Austenitic Stainless Steel (M-1/P-1/S-1, Groups 1 and 2 Welded to M-8/P-8/S-8, Group 1) 1/16 through 1-1/2 inch thick, IN309 and ER309, As-Welded Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-1/8-231 | 帶可熔嵌入焊條的碳鋼與奧氏體不銹鋼氣體保護鎢電弧焊(從M-1/P-1/S-1,組1或組2焊接到M- 8/P-8/S-8, 組1) | Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding, with Consumable Insert Root, Followed by Shielded Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1/P-1/S-1, Groups 1 and 2 Welded to M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 inch thick, IN309, ER309, and E309-15, 16, or, 17, As-Welded Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-4-217 | 鉻鉬鋼氣體保護鎢極弧焊標準焊接程序規范(M-4/P-4/S-4,1或2組)ER 80S-B2.在焊接條件下1/8到1/2英寸厚或在PW | Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding of Chromium-Molybdenum Steel (M-4/P-4/S-4, Group 1 or 2) ER80S-B2, 1/8 through 1/2-in. Thick, As-Welded Condition or 1/8 through 3/4-in. Thick PWHT Condition, Primarily Pipe Application |
| ANSI/AWS B2.1-4-218 | 標準焊接程序規范(WPS).主要用于管道的、在焊接或1/8到1-1/2英寸厚PWHT條件下、(M-4/P-4/S-4,1或2組)E8018- | Standard Welding Procedure Specification (WPS) Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4/S-4, Group 1 or 2) E8018-B2, 1/8 through 1/2 in. Thick, As-Welded Condition or 1/8 through 1-1/2 in. Thick PWHT Condition, Primarily Pipe Application |
| ANSI/AWS B2.1-4-219 | 氣體保護鎢極弧焊以及鉻鉬鋼的氣體保護鎢極弧焊標準焊接程序規范(M-4/P-4/S-4,1或2組).在焊接條件下1/8到12 | Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4/S-4, Group 1 or 2) 1/8 through 12/2 in. thick, As-Welded Condition or 1/8 through 1/1/2 in. Thick, PWHT Condition ER80S-B2, E8018-B2 Primarily Pipe Application |
| ANSI/AWS B2.1-4-220 | 標準焊接程序規范(WPS).主要用于IN515, ER80S-B2管道的、在焊接或1/8到3/4英寸厚PWHT條件下、(M-4/P-4/S-4, | Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding (Consumable Insert Root) of Chromium-Molybdenum Steel (M-4/P-4/S-4, Group 1 or 2) 1/8 through 1/2-in. Thick, As-Welded Condition or 1/8 through 3/4-in. Thick, PWHT Condition IN515, ER80S-B2, Primarily Pipe Application |
| ANSI/AWS B2.1-4-221 | 氣體保護鎢極弧焊(自耗嵌入式焊縫根部)以及鉻鉬鋼保護金屬電弧焊標準焊接程序規范(M-4/P-4/S-4,1或2組).在 | Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding (Consumable Insert Root) Followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4/S-4, Group 1 or 2) 1/8 through 1/2-in. Thick, As-Welded Condition or 1/8 through 1-1/2-in. Thick, PWHT Condition, IN515, ER80S-B2 and E8018-B2, Primarily Pipe Application |
| ANSI/AWS B2.1-5A-222 | 鉻鉬鋼氣體保護鎢極弧焊標準焊接程序規范(M-5A或P-5A).在焊接條件下ER 90S-BS,1/8到1/2英寸厚或在PWHT條件 | Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding of Chromium-Molybdenum Steel (M-5A or P-5A) ER90S-B3 1/8 through 1/2-in. Thick, As-Welded Condition or 1/8 through 3/4-in. Thick, PWHT Condition, Primarily Pipe Application |
| ANSI/AWS B2.1-5A-223 | 鉻鉬鋼保護金屬電弧焊標準焊接程序規范(M-5A或P-5A).在焊接條件下ER 9018-BS,1/8到1/2英寸厚或在PWHT條件下 | Standard Welding Procedure Specification (WPS) Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A or P-5A) ER9018-B3 1/8 through 1/2-in. Thick, As-Welded Condition or 1/8 through 1-1/2-in. Thick, PWHT Condition, Primarily Pipe Application |
| ANSI/AWS B2.1-5A-224 | 氣體保護鎢極弧焊以及鉻鉬鋼保護金屬電弧焊標準焊接程序規范(M-5A或P-5A).在焊接條件下1/8到1/2英寸厚或在P | Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A or P-5A) 1/8 through 1/2-in. Thick As-Welded Condition, or 1/8 through 1-1/2-in. Thick PWHT Condition, ER90S-B3, E9018-B3, Primarily Pipe Application |
| ANSI/AWS B2.1-5A-225 | 標準焊接程序規范(WPS).主要用于IN521,ER90S-B3管道的、在焊接或1/8到3/4英寸厚PWHT條件下、(M-5A或P-5A)1/ | Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding (Consumable Insert Root) of Chromium-Molybdenum Steel (M-5A or P-5A) 1/8 through 1/2 in. thick, As-Welded Condition or 1/8 through 3/4 in. thick, PWHT Condition IN521, ER90S-B3 Primarily Pipe Application |
| ANSI/AWS B2.1-5A-226 | 氣體保護鎢極弧焊(自耗嵌入式焊縫根部)以及鉻鉬鋼保護金屬電弧焊標準焊接程序規范(M-5A或P-5A).在焊接條件 | Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding (Consumable Insert Root) Followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A or P-5A) 1/8 through 1/2-in. Thick As-Welded Condition, or 1/8 through 1-1/2-in. Thick PWHT Condition, IN521, ER90S-B3, and E9018-B3, Primarily Pipe Application |
| ANSI/AWS B2.1-8-212 | 主要用于管道的、在ERXX焊接條件下、1/8到1-1/2英寸厚的奧氏體不銹鋼(M-8/P-8/S-8,組1)的鎢電極惰性氣體保 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group), 1/8 through 1-1/2 inch Thick ERXX, As-Welded Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-8-213 | 主要用于管道的、在焊接條件下(M-8/P-8/S-8,組)1/8到1-1/2英寸E3XX-XX奧氏體不銹鋼的藥皮焊條電弧焊的標準 | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group), 1/8 through 1-1/2 inch Thick E3XX-XX, As-Welded Condition, Primarily Pipe Applications |
| ANSI/AWS B2.1-8-214 | 標準焊接程序規范(WPS).主要用于管道的,在焊接條件下、1/8到1-1/2英寸厚ER3XX,E3XX-XX的奧氏體不銹鋼(M-8/P | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group), 1/8 through 1-1/2 Inch Thick ER3XX, E3XX-XX, As-Welded Condition, Primarily Pipe Applications |
| ANSI/AWS D10.10 | 管和管道焊接局部加溫推薦規程 | Recommended Practices for Local Heating of Welds in Piping and Tubing |
| ANSI/AWS D10.13 | 醫療氣體系統用銅管道和管系的釬焊的推薦實施規程 | Recommended Practices for the Brazing of Copper Pipe and Tubing for Medical Gas Systems |
| ANSI/AWS D10.13/D 10.13M | 醫療氣體系統用銅管和管道釬焊的推薦規程 | Recommended Practices for the Brazing of Copper Pipe and Tubing for Medical Gas Systems |
| ANSI/AWS D10.6 | 鈦管和管道鎢電極氣體保護焊推薦規程 | Gas Tungsten Arc Welding of Titanium Piping and Tubing, Recommended Practice for |
| ANSI/AWS D18.1 | 衛生潔具用奧氏體不銹鋼管和管道的焊接規范 | Specification for Welding of Austenitic Stainless Steel Tube and Pipe Systems in Sanitary (Hygenic) Applications |
| ANSI/AWS F4.1 | 容器和管道焊接和切割準備推薦安全規程 | Recommended Safe Practices for the Preparation for Welding and Cutting of Containers and Piping |
| ANSI/AWWA C203a | 鋼制供水管道的煤焦油保護涂層和內襯標準.搪瓷和膠帶.熱水 | Standard for Coal-Tar Protective Coatings and Linings for Steel Water Pipelines - Enamel and Tape - Hot Applied |
| ANSI/AWWA C217 | 供水鋼管道專用型鋼、連接件和配件外部低溫礦脂帶和礦脂臘油帶包覆層 | Cold-Applied Petrolatum Tape and Petroleum Wax Tape Coating for the Exterior of Special Sections, Connections, and Fittings for Buried Steel Water Pipelines |
| ANSI/AWWA C218 | 地面鋼制供水管道和配件外部涂覆 | Coating the Exterior of Aboveground Steel Water Pipelines and Fittings |
| ANSI/AWWA C800 | 地下管道閥門和配件 | Underground Service Line Valves and Fittings |
| ANSI/FCI 78-1 | 不包括Y型在內的管道濾器壓力額定值標準 | Pressure Rating Standard for Pipeline Strainers Other than "Y" Type |
| ANSI/GPTC Z380.1-2003 Addendum 4 | 燃?xì)鈧鬏敽头峙涔艿老到y(tǒng)指南2003版 附錄4 | Guide for Gas Transmission and Distribution Piping Systems 2003 Edition - Addendum 4 |
| ANSI/GPTC Z380.1-2003 Addendum No. 3 | 氣體運輸和分配用管道系統的GPTC指南 | GPTC Guide for Gas Transmission and Distribution Piping Systems |
| ANSI/GPTC Z380.1-2003 TR 00-15 | 氣體運輸和分配用管道系統的指南 | Guide for Gas Transmission and Distribution Piping Systems (consolidated into ANSI GPTC Z380.1-2003 Addendum No. 3-2005) |
| ANSI/GPTC Z380.1-2003 TR 02-25 | 氣體運輸和分配用管道系統的指南（與ANSI GPTC Z380.1-2003補充件3-2005聯合組成的） | Guide for Gas Transmission and Distribution Piping Systems (consolidated into ANSI GPTC Z380.1-2003 Addendum No. 3-2005) |
| ANSI/GPTC Z380.1-2003 TR 03-12 | 氣體運輸和分配用管道系統的指南（與ANSI GPTC Z380.1-2003補充件3-2005聯合組成的） | Guide for Gas Transmission and Distribution Piping Systems (consolidated into ANSI GPTC Z380.1-2003 Addendum No. 3-2005) |
| ANSI/GPTC Z380.1-2003 TR 03-41 | 氣體運輸和分配用管道系統的指南（與ANSI GPTC Z380.1-2003補充件3-2005聯合組成的） | Guide for Gas Transmission and Distribution Piping Systems (consolidated into ANSI GPTC Z380.1-2003 Addendum No. 3-2005) |
| ANSI/GPTC Z380.1-2003 TR 04-06 | 氣體運輸和分配用管道系統的指南（與ANSI GPTC Z380.1-2003補充件3-2005聯合組成的） | Guide for Gas Transmission and Distribution Piping Systems (consolidated into ANSI GPTC Z380.1-2003 Addendum No. 3-2005) |
| ANSI/GPTC Z380.1-2003 TR 04-07 | 氣體運輸和分配用管道系統的指南（與ANSI GPTC Z380.1-2003補充件3-2005聯合組成的） | Guide for Gas Transmission and Distribution Piping Systems (consolidated into ANSI GPTC Z380.1-2003 Addendum No. 3-2005) |
| ANSI/GPTC Z380.1-2003 TR 04-12 | 氣體運輸和分配用管道系統的指南（與ANSI GPTC Z380.1-2003補充件3-2005聯合組成的) | Guide for Gas Transmission and Distribution Piping Systems (consolidated into ANSI GPTC Z380.1-2003 Addendum No. 3-2005) |
| ANSI/GPTC Z380.1-2003 TR 04-53 | 氣體運輸和分配用管道系統的指南（與ANSI GPTC Z380.1-2003補充件3-2005聯合組成的） | Guide for Gas Transmission and Distribution Piping Systems (consolidated into ANSI GPTC Z380.1-2003 Addendum No. 3-2005) |
| ANSI/GPTC Z380.1-2003 TR 04-55 | 氣體運輸和分配用管道系統的指南（與ANSI GPTC Z380.1-2003補充件3-2005聯合組成的） | Guide for Gas Transmission and Distribution Piping Systems (consolidated into ANSI GPTC Z380.1-2003 Addendum No. 3-2005) |
| ANSI/GPTC Z380.1-2003 TR 04-57 | 氣體運輸和分配用管道系統的指南（與ANSI GPTC Z380.1-2003補充件3-2005聯合組成的） | Guide for Gas Transmission and Distribution Piping Systems (consolidated into ANSI GPTC Z380.1-2003 Addendum No. 3-2005) |
| ANSI/IAPMO UPC1 | 2003統一管道工程代碼 | 2003 Uniform Plumbing Code |
| ANSI/ICEA P-54-440 | 安裝在電纜管道中的電纜的載流量 | Ampacities of Cables Installed in Cable Trays |
| ANSI/IEEE 1235 | 地下電力電纜和管道用可識別護套的特性指南 | Guide for the Properties of Identifiable Jackets for Underground Power Cables and Ducts |
| ANSI/IEEE 628 | 核電站1E級電路電纜管道系統的設計、安裝和合格鑒定的標準 | Raceway Systems for Class 1E Circuits for Nuclear Power Generating Stations, Criteria for the Design, Installation, and Qualification of |
| ANSI/IEEE 844 | 管道和容器的電阻抗、電感和集膚效應生熱的推薦規程 | Electrical Impedance, Induction, and Skin Effect Heating of Pipelines and Vessels, Recommended Practice for |
| ANSI/ISA 77.70 | 礦物燃料發電廠設備管道安裝 | Fossil Fuel Power Plant Instrument Piping Installation |
| ANSI/ISA S67.10 | 核電站中使用的取樣管線管系和管道標準 | Sample-Line Piping and Tubing Standard for Use in Nuclear Power Plants |
| ANSI/NAAMM AMP521 | 帶圓形臺面的管道圍欄系統手冊 | Pipe Railing Systems Manual Including Round Table |
| ANSI/NACE RP0502 | 管道外部腐蝕的直接評估方法 | Pipeline External Corrosion Direct Assessment Methodology |
| ANSI/NACE TM0284 | 耐逐級斷裂的管道鋼的評價 | Evaluation of Pipeline Steel for Resistance to Stepwise Cracking |
| ANSI/NECA 111 | 非金屬管道的安裝標準(RNC、ENT和LFNC) | Standard for Installing Nonmetallic Raceways (RNC, ENT and LFNC) |
| ANSI/NECA 605 | 地下非金屬公用事業管道安裝的推薦規程 | Recommended Practice for Installing Underground Nonmetallic Utility Duct |
| ANSI/NFPA 274 | 管道絕緣材料燃燒特性評價的標準試驗方法 | Standard Test Method to Evaluate Fire Performance Characteristics of Pipe Insulation |
| ANSI/NSF 14(i11) | 塑料管道系統部件和相關材料 | Plastics Piping System Components and Related Materials |
| ANSI/NSF 14(i7) | 塑料管道組件和相關材料 | Plastics Piping System Components and Related Materials |
| ANSI/NSF 14 | 塑料管道系統配件和相關材料 | Plastics Piping System Components and Related Materials (i4) |
| ANSI/NSF 24 | 用于活動房屋和游樂車的衛生管道系統零件 | Plumbing System Components for Manufactured Homes and Recreational Vehicles |
| ANSI/SAE J518 | 四螺栓拼合法蘭型液壓法蘭管、管道及軟管接頭 | Hydraulic Flanged Tube, Pipe, and Hose Connections, Four-Bolt Split Flange Type |
| ANSI/SMACNA 005 | 圓形工業管道建造標準 | Round Industrial Duct Construction Standards |
| ANSI/TIA/EIA 102BAAA-1 | 項目25， FDMA共用氣體管道接頭，補充件1 | Project 25 FDMA Common Air Interface Addendum 1 |
| ANSI/UL 1978 | 潤滑脂管道的安全標準 | Standard for Safety for Grease Ducts |
| ANSI/UL 1996 | 管道加熱器的安全標準 | Standard for Safety for Duct Heaters |
| ANSI/UL 2239 | 導線管、管道和電纜支持用五金件標準 | Standard for Hardware for the Support of Conduit, Tubing and Cable |
| ANSI/UL 567 | 石油產品和LP氣用緊急斷開裝置、旋轉連接器和管道連接配件 | Emergency Breakaways Fittings, Swivel Connectors and Pipe-Connection Fittings for Petroleum Products and LP-Gas |
| ANSI/UL 569 | 液化合油汽固定管道接口標準 | Pigtails and Flexible Hose Connectors for LP-Gas |
| ANSI/UL 5A | 非金屬表面電纜管道和配件的安全標準 | Standard for Safety for Non-Metallic Surface Raceways and Fittings |
| ANSI/UL 5B | 支柱型槽形電纜管道和配件 | Strut-Type Channel Raceways and Fittings |
| ANSI/UL 5C | 與數據、信號和控制電路一起使用的表面電纜管道和配件的安全標準 | Standard for Safety for Surface Raceways and Fittings for Use with Data, Signal and Control Circuits |
| ANSI/UL 870 | 電線管道、輔助槽和相關配件 | Wireways, Auxiliary Gutters, and Associated Fittings |
| ASME A112.1.2 | 管道系統中的空氣間架 | (Air gaps in plumbing systems) |
| ASME A112.19.1M Supplement 2-2 | 搪瓷鑄鐵管道固定件.補充件2 | (Enameled cast iron plumbing fixtures - Supplement 2) |
| ASME A112.19.1M | 搪瓷鑄鐵管道固定件 | (Enameled cast iron plumbing fixtures) |
| ASME A112.19.4M Supplement 2-2 | 搪瓷鑄鋼管道固定件.補充件2 | (Porcelain enameled formed steel plumbing fixtures - Supplement 2) |
| ASME A112.19.4M | 搪瓷鑄鋼管道固定件 | (Porcelain enameled formed steel plumbing fixtures) |
| ASME A112.19.9M | 未上釉陶瓷管道緊固件 | (Non-vitreous ceramic plumbing fixtures) |
| ASME A13.1 | 管道系統識別方案 | (Scheme for the identification of piping systems) |
| ASME B16.33 | 125表壓及以下的氣體管道系統中使用的手動金屬氣閥 | (Manually operated metallic gas valves for use in gas piping systems up to 125 psi (sizes NPS 1/2 through NPS 2)) |
| ASME B31.1 Interpretations 25- | 說明:動力管道 | (Interpretations 25: Power piping) |
| ASME B31.11 Interpretations 1- | 說明:泥漿輸送管道系統 | (Interpretations 1: Slurry transportation piping systems) |
| ASME B31.11 | 泥漿輸送管道系統 | (Slurry transportation piping systems) |
| ASME B31.1c Addenda | 動力管道.修改件 | (Power piping; Addenda) |
| ASME B31.2 | 氣體燃料管道 | (Fuel gas piping) |
| ASME B31.3 Cases NO. 2 | 壓力管道用套管規程.套管141:在ANSI/ASME B 31.3管道標準中鋁合金法蘭的使用規則 | (Cases code for pressure piping - Case 141: Rules for use of aluminium alloy flanges in ANSI/ASME B 31.3 piping) |
| ASME B31.4 | 液烴和其他液體用管道輸送系統 | (Pipeline transportation systems for liquid hydrocarbons and other liquids) |
| ASME B31.5 Interpretations 5-1 | 說明:制冷管道 | (Interpretations 5: Refrigeration piping) |
| ASME B31.5 | 制冷管道和傳熱元件 | (Refrigeration piping and heat transfer components) |
| ASME B31.8 Interpretations 10- | 說明:氣體運輸和分配管道系統 | (Interpretations 10: Gas transmission and distribution piping systems) |
| ASME B31.8b Addenda | 氣體輸送和分配管道系統.修改件 | (Gas transmission and distribution piping systems; Addenda) |
| ASME B31.8c Addenda | 氣體運輸和氣體分配管道系統.修改件 | (Gas transmission and distribution piping systems; Addenda) |
| ASME B31.8S | 燃?xì)夤艿赖墓芾硐到y(tǒng)完整性.補充件 | (Managing system integrity of gas pipelines; Supplement) |
| ASME B31.9 | 建筑物服務管道 | (Building services piping) |
| ASME B31G | 用于測定受腐蝕管道剩余強度的手冊.MSME B31 壓力管道規范的補充件 | (Manual for determining the remaining strength of corroded pipelines; A supplement to ASME B31 code for pressure piping) |
| ASME B32.5 | 除管道外的管形金屬制品的優選米制尺寸 | (Preferred metric sizes for tubular metal products other than pipe) |
| ASME B32.6M | 除管道外的管形金屬制品與英制尺寸相當?shù)膬?yōu)選米制尺寸 | (Preferred metric equivalents of inch sizes for tubular metal products other than pipe) |
| ASME MFC-1M | 密封管道中液體流量測量用術語匯編 | (Glossary of terms used in measurement of fluid flow in pipes) |
| ASME MFC-2M | 密封管道中液體流量測量的不確定度 | (Measurement uncertainty for fluid flow in closed conduits) |
| ASME MFC-3M Errata | 用孔板,管接頭和文丘里管測量管道中的流量.正誤表 | (Measurement of fluid flow in pipes using orifice, nozzle, and Venturi; Errata) |
| ASME MFC-3M | 用孔板,管接頭和文丘里管測量管道中的液體流量. | (Measurement of fluid flow in pipes using orifice, nozzle, and Venturi) |
| ASME MFC-6M Errata | 用渦流流量計測量管道中的液體流量.正誤表 | (Measurement of fluid flow in pipes using vortex flow meters; Errata) |
| ASME Y32.2.3 | 管道配件,閥門,管道配置用圖形符號 | (Graphical symbols for pipe fittings, valves and piping) |
| ASME Y32.4 | 建筑學和房屋建筑簡圖上管道裝置示意用圖形符號 | (Graphic symbols for plumbing fixtures for diagrams used in architecture and building construction) |
| ASTM A 1047/A 1047M | 管道的氣壓泄漏標準試驗方法 | Standard Test Method for Pneumatic Leak Testing of Tubing |
| ASTM A 105/A 105M | 管道設備用碳素鋼鍛件的標準規范 | Standard Specification for Carbon Steel Forgings for Piping Applications |
| ASTM A 350/A 350Ma | 管道部件用要求切口韌性試驗的碳素鋼與低合金鋼鍛件的標準規范 | Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components |
| ASTM A 350/A 350Mc | 管道部件用要求切口韌性試驗的碳素鋼與低合金鋼鍛件的標準規范 | Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components |
| ASTM A 420/A 420M | 低溫設備用鍛制碳素鋼和合金鋼管道配件的標準規范 | Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service |
| ASTM A 511 | 無縫不銹鋼機械管道的標準規范 | Standard Specification for Seamless Stainless Steel Mechanical Tubing |
| ASTM A 696a | 壓力管道部件用特級熱鍛或冷精軋?zhí)妓劁摪魳?biāo)準規范 | Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components |
| ASTM A 727/A 727M | 具有固定切口韌性的管道部件用碳素鋼鍛件標準規范 | Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness |
| ASTM A 787 | 金屬涂覆電阻焊接碳素鋼機械管道的標準規范 | Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing |
| ASTM A 807/A 807M | 生活污水管及其它類似用途安裝波紋鋼板結構管道的標準實施規范 | Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications |
| ASTM A 836/A 836M | 玻璃襯里的管道系統和壓力容器設備用鈦穩定的碳素鋼鍛件標準規范 | Standard Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel Service |
| ASTM A 847/A 847M | 提高耐大氣腐蝕性的冷成型焊接和無縫高強度低合金結構管道用標準規范 | Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance |
| ASTM A 888 | 污水、雨水、廢物和通風管道用無凸口鑄鐵污水管及配件的標準規范 | Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications |
| ASTM A 930 | 涵洞、雨水管道和其它地下管道用波紋形金屬管壽命周期成本分析的標準實施規范 | Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits |
| ASTM A 961/A 961M | 管道設施用鋼法蘭、鍛件、閥門和部件的通用要求的標準規范 | Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications |
| ASTM ANS/ISO 15002 | 醫用氣體管道系統終端裝置用氣流量測量裝置 | Flow-metering devices for connection to terminal units of medical gas pipeline systems |
| ASTM B 221a | 鋁和鋁合金擠壓棒材、桿材、金屬絲、型材和管道的標準規范 | Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes |
| ASTM B 221Ma | 鋁和鋁合金擠壓棒材、桿材、金屬絲、型材和管道的標準規范(米制) | Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes [Metric] |
| ASTM B 345/B 345M | 氣體和油傳輸和配送管道系統用鋁及鋁合金無縫管和無縫擠制管標準規范 | Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube for Gas and Oil Transmission and Distribution Piping Systems |
| ASTM B 423 | 鎳鐵鉻鉬銅合金無縫管道標準規范(UNS N08825 and N08221) | Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825 and N08221)* Seamless Pipe and Tube |
| ASTM B 444 | 鎳鉻鉬鈳合金管和鎳鉻鉬硅合金管道的標準規范 | Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube |
| ASTM B 698 | 無縫銅和銅合金管和管道的標準分類 | Standard Classification for Seamless Copper and Copper Alloy Plumbing Pipe and Tube |
| ASTM B 790/B 790M | 涵洞、排水和其它地下管道用波紋鋁管、管拱和拱結構設計的標準實施規程 | Standard Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts, Storm Sewers, and Other Buried Conduits |
| ASTM C 1003 | 用校驗熱盒法測量冷氣管道管段的熱特性的試驗方法 | Test Method for Thermal Performance of Cooling-Air Duct Sections, Using a Calibrated Hot Box |
| ASTM C 1071 | 纖維玻璃管道襯里絕緣材料(隔熱和吸音材料)標準規范 | Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material) |
| ASTM C 1091a | 上釉陶土管道的水壓滲入檢驗的標準試驗方法 | Standard Test Method for Hydrostatic Infiltration Testing of Vitrified Clay Pipe Lines |
| ASTM C 1173 | 地下管道系統用柔性過渡管聯接器的標準規范 | Standard Specification for Flexible Transition Couplings for Underground Piping Systems |
| ASTM C 118a | 灌溉或排水用混凝土管道標準規范 | Standard Specification for Concrete Pipe for Irrigation or Drainage |
| ASTM C 118Ma | 灌溉或排水用混凝土管道標準規范 | Standard Specification for Concrete Pipe for Irrigation or Drainage [Metric] |
| ASTM C 1440 | 雨水、廢物和通風(DWV)、下水道、衛生和暴雨管道系統用熱塑性彈性(TPE)墊圈材料標準規范 | Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems |
| ASTM C 1478 | 加筋混凝土暴雨排水溝設施、管道和橫向排水溝間的排水溝回彈性連接件的標準規范 | Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals |
| ASTM C 1478M | 加筋混凝土排暴雨污水結構、管道和橫向排水溝間的暴雨排水溝彈性連接件標準規范 | Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals [Metric] |
| ASTM C 1534 | 用作管道系統吸熱吸聲襯墊的軟質聚合物泡沫薄片的標準規范 | Standard Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems |
| ASTM C 1540 | 重型有套連接器連接無轂鑄鐵污水管道和管配件的標準規范 | Standard Specification for Heavy Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings |
| ASTM C 302 | 預制包覆管道用隔熱材料密度和尺寸的標準試驗方法 | Standard Test Method for Density and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation |
| ASTM C 428 | 石棉水泥無壓污水管道的標準規范 | Standard Specification for Asbestos-Cement Nonpressure Sewer Pipe |
| ASTM C 541 | 石棉水泥管道用襯料標準規范 | Standard Specification for Linings for Asbestos-Cement Pipe |
| ASTM C 663 | 石棉水泥排雨水管道標準規范 | Standard Specification for Asbestos-Cement Storm Drain Pipe |
| ASTM C 667 | 環境溫度空氣以上管道操作和設備的預制纖維反射絕緣的標準規范 | Standard Specification for Prefabricated Reflective Insulation Systems for Equipment and Pipe Operating at Temperatures above Ambient Air |
| ASTM C 822 | 混凝土管道和相關產品的標準術語 | Standard Termninology Relating to Concrete Pipe and Related Products |
| ASTM C 828 | 上釉陶土管道的低壓空氣試驗的標準試驗方法 | Standard Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines |
| ASTM C 875 | 石棉水泥管道標準規范 | Standard Specification for Asbestos-Cement Conduit |
| ASTM C 890 | 用于設計最小負荷結構的整體或分段預制混凝土貯水和廢水管道的標準實施規程 | Standard Practice for Minimum Structural Design Loading for Monolithic or Sectional Precast Concrete Water and Wastewater Structures |
| ASTM C 924 | 低壓空氣試驗法測試混凝土污水管道的標準實施規程 | Standard Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method |
| ASTM C 924M | 低壓空氣試驗法測試混凝土污水管道標準實施規程(米制) | Standard Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method (Metric) |
| ASTM C 966 | 石棉水泥無壓管道的安裝標準指南 | Standard Guide for Installing Asbestos-Cement Nonpressure Pipe |
| ASTM C 969 | 安裝的預制混凝土污水管道的表面滲入和滲出的驗收檢驗的標準實施規程 | Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines |
| ASTM C 969M | 安裝的預制混凝土污水管道的表面滲入和滲出的驗收檢驗的標準實施規程(米制) | Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines [Metric] |
| ASTM C 971 | 加熱、通風和空氣調節管道用絕熱體系的選擇和應用 | Selection and Application of Insulation Systems for Heating, Ventilating and Air Conditioning Duct Work |
| ASTM C 990a | 使用預制撓性接縫密封膠的混凝土管道、人孔和預制箱形件的接縫的標準規范 | Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants |
| ASTM C 990Ma | 使用預制撓性接縫密封膠的混凝土管道、人孔和預制箱形件的接縫的標準規范(米制) | Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants [Metric] |
| ASTM D 1599 | 塑料管道和配件耐短時液壓力的標準試驗方法 | Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings |
| ASTM D 2564 | 聚氯乙烯(PVC)塑料管道系統用液態粘結劑的的標準規范 | Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems |
| ASTM D 2837 | 獲得熱塑性管道材料靜水壓設計基數和熱塑管道制品壓力設計基數的標準試驗方法 | Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products |
| ASTM D 3138 | 丙烯腈-丁二烯-苯乙烯共聚物和聚氯乙烯無壓管道系統構件之間轉換接頭用液態粘結劑的標準規范 | Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components |
| ASTM D 3140 | 擴口聚烯烴管及管道系統 | Flaring Polyolefin Pipe and Tubing |
| ASTM D 3491 | 硫化橡膠容器和管道內襯的試驗方法 | Test Methods for Vulcanizable Rubber Tank and Pipe Lining |
| ASTM D 5013 | 管道和其他地點排放的廢棄物的取樣 | Sampling Wastes from Pipes and Other Point Discharges |
| ASTM D 5243 | 在地下管道水的明渠流量測量的試驗方法 | Test Method for Open-Channel Flow Measurement of Water Indirectly at Culverts |
| ASTM D 5503 | 管道儀表的天然氣抽樣處理和調節系統標準規程 | Standard Practice for Natural Gas Sample-Handling and Conditioning Systems for Pipeline Instrumentation |
| ASTM D 5642 | 密封管道化學兼容性試驗的標準試驗方法 | Standard Test Method for Sealed Tube Chemical Compatibility Test |
| ASTM D 5926 | 排水管、排廢水和排氣管(DWV)、下水溝、衛生設施和暴雨管道系統用聚氯乙烯墊圈的標準規范 | Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems |
| ASTM D 6070 | 預組裝的電線和電纜用光壁可盤繞的聚乙烯(PE)管道物理特性的標準試驗方法 | Standard Test Methods for Physical Properties of Smooth-Wall, Coilable, Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable |
| ASTM D 6167 | 地球物理測井管道鉆孔的標準指南:機械卡鉗 | Standard Guide for Conducting Borehole Geophysical Logging: Mechanical Caliper |
| ASTM D 6190 | 通過土壤埋葬的試驗室模仿對管道涂層的陰極非結合的標準試驗方法 | Standard Test Method for Cathodic Disbonding of Pipeline Coatings by Laboratory Simulation of Soil Burial |
| ASTM D 6676 | 用內部加熱測定高溫下外部管道鍍層的陰極斷接的標準試驗方法 | Standard Test Method for Cathodic Disbonding of Exterior Pipeline Coatings at Elevated Temperatures Using Interior Heating |
| ASTM E 2029 | 用示蹤氣體稀釋法測量管道中體積和質量流量率的標準試驗方法 | Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution |
| ASTM E 2096 | 遠程現場試驗法現場檢驗鐵磁熱交換器管道的標準規程 | Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing |
| ASTM E 213 | 金屬管道超聲檢驗的標準實施規范 | Standard Practice for Ultrasonic Examination of Metal Pipe and Tubing |
| ASTM E 2336 | 耐火潤滑脂管道密封系統的標準試驗方法 | Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems |
| ASTM E 2342 | 管道密封劑的耐久檢驗的標準試驗方法 | Standard Test Method for Durability Testing of Duct Sealants |
| ASTM E 273 | 焊接管道焊接區域的超聲波檢驗標準實施規程 | Standard Practice for Ultrasonic Examination of the Weld Zone of Welded Pipe and Tubing |
| ASTM F 1006 | 船用管道裝置用液滴分離器 | Entrainment Separators for Use in Marine Piping Applications |
| ASTM F 1007 | 套裝滑動成型或船用管道膨脹節 | Standard Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application |
| ASTM F 1041 | 聚烯烴燃?xì)鈮毫芎凸艿赖娜細馀懦臉?biāo)準指南 | Standard Guide for Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing |
| ASTM F 1120 | 管道用循環金屬風箱型膨脹節 | Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications |
| ASTM F 1155 | 管道系統材料的選擇與應用標準實施規程 | Standard Practice for Selection and Application of Piping System Materials |
| ASTM F 1173 | 船舶用熱固性樹脂玻璃纖維管道系統標準規范 | Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications |
| ASTM F 1199 | 鑄造(各種溫度及各種壓力)和焊接管道過濾器(最大表壓為150磅/英寸及最大溫度150華氏度) | Standard Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150°F Maximum) |
| ASTM F 1200 | 制造好的(焊接)管道過濾器(表壓大于150磅/英寸及溫度為150華氏度) | Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F) |
| ASTM F 1201 | 溫度大于零華氏度的管道用流體調節器配件 | Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F |
| ASTM F 1335 | 高溫設備用標定壓力的復合管道及其配件標準規范 | Standard Specification for Pressure-Rated Composite Pipe and Fittings for Elevated Temperature Service |
| ASTM F 1387 | 管道機械附聯配件的性能標準規范 | Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings |
| ASTM F 1417 | 使用低壓空氣對塑料自流排水管道安裝驗收方法 | Test Method for Installation Acceptance of Plastic Gravity Sewer Lines Using Low-Pressure Air |
| ASTM F 1429 | 使用撓性彈性密封件裝在承接口處的地下塑料管道接頭裝配力的測試方法 | Standard Test Method for Assembly Force of Plastic Underground Conduit Joints That Use Flexible Elastomeric Seals Located in the Bell |
| ASTM F 1476 | 管道用裝襯墊的機械聯接器性能的標準規范 | Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications |
| ASTM F 1548 | 管道用裝襯墊的機械聯接器配件性能標準規范 | Standard Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications |
| ASTM F 1563 | 聚乙烯(PE)氣體管道或管子用擠出工具的標準規范 | Standard Specification for Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing |
| ASTM F 1606 | 帶變形聚乙烯(PE)內襯的下水道和管道復原的標準實施規程 | Standard Practice for Rehabilitation of Existing Sewers and Conduits with Deformed Polyethylene (PE) Liner |
| ASTM F 1698 | 排污管和管道修復用聚氯乙烯異型條襯里和水泥薄漿安裝的標準實施規程 | Standard Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits |
| ASTM F 1735 | 修復帶人孔管道的PVC襯底用聚氯乙烯(PVC)異型帶材的標準規范 | Standard Specification for Poly (Vinyl Chloride) (PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits |
| ASTM F 1741 | 現有排水溝和管道修復用機械螺旋纏繞聚氯乙烯（PVC）內襯管安裝的標準規程 | Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits |
| ASTM F 1743 | 對現有硫化固定硫化熱固樹脂管牽入安裝管線和管道修復的標準規程 | Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP) |
| ASTM F 1947 | 折疊聚氯乙烯(PVC)管進入現有排水管和管道中的安裝標準實施規程 | Standard Practice for Installation of Folded Poly (Vinyl Chloride) (PVC) Pipe into Existing Sewers and Conduits |
| ASTM F 2014 | 管道系統用非增強擠制T形接頭標準規范 | Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications |
| ASTM F 2019 | 通過玻璃纖維增強塑料(GRP)現場硫化熱固性樹脂管(CIPP)的現場拖拉安裝修復已有管道的標準操作規程 | Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP) |
| ASTM F 2164 | 使用靜液壓的聚乙烯壓力管道系統的現場泄漏試驗的標準實施規范 | Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Hydrostatic Pressure |
| ASTM F 2176 | 機械連接件用聚乙烯導管,排泄管和內部管道的標準規范 | Standard Specification for Mechanical Couplings Used on Polyethylene Conduit, Duct and Innerduct |
| ASTM F 2207 | 金屬輸氣管道復原用硫化固定內部管道系統的標準規范 | Standard Specification for Cured-in-Place Pipe Lining System for Rehabilitation of Metallic Gas Pipe |
| ASTM F 2231 | 壓力管道用聚乙烯薄樣品的卻貝沖擊試驗的標準試驗方法 | Standard Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes |
| ASTM F 2330 | 評價多層聚烯烴管道耐熱氯化水氧化的標準試驗方法 | Standard Test Method for Evaluating the Oxidative Resistance of Multilayer Polyolefin Tubing to Hot Chlorinated Water |
| ASTM F 2349 | 集成天然氣管道和光纖系統的操作和維護的標準規程 | Standard Practice for Operation and Maintenance of Integrated Natural Gas Pipelines and Optical Fiber Systems |
| ASTM F 2389 | 壓力標定的聚丙烯管道系統的標準規范 | Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems |
| ASTM F 2550 | 通過電掃描電流流經管壁的振動確定下水管道漏洞方位的標準實施規程 | Standard Practice for Locating Leaks in Sewer Pipes Using Electro-Scan--the Variation of Electric Current Flow Through the Pipe Wall |
| ASTM F 441/F 441M | 氯化聚氯乙烯(CPVC)塑料管道的標準規范(40和80號表) | Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80 |
| ASTM F 481 | 化糞池瀝濾場用熱塑性管道和波紋軟管的安裝標準實施規范 | Standard Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields |
| ASTM F 628 | 有泡沫填充料的丙烯腈-丁二烯-苯乙烯共聚物(ABS)塑料雨水管、污水管和通風管道標準規范.表40 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core |
| ASTM F 645 | 熱塑性水壓管道系統的選擇、設計和安裝的標準指南 | Standard Guide for Selection, Design, and Installation of Thermoplastic Water-Pressure Piping Systems |
| ASTM F 683a | 管道和機械用熱絕緣材料選擇和應用的標準規程 | Standard Practice for Selection and Application of Thermal Insulation for Piping and Machinery |
| ASTM F 690 | 熱塑性壓力管道灌溉系統的地下安裝標準規程 | Standard Practice for Underground Installation of Thermoplastic Pressure Piping Irrigation Systems |
| ASTM F 704 | 管道系統法蘭接頭用螺栓長度選擇的標準實施規程 | Standard Practice for Selecting Bolting Lengths for Piping System Flanged Joints |
| ASTM F 708 | 硬質管道支架的設計與安裝標準規程 | Standard Practice for Design and Installation of Rigid Pipe Hangers |
| ASTM F 721 | 標準管道組裝件 | Standard Specification for Gage Piping Assemblies |
| ASTM F 722 | 船上管道系統用焊接接頭標準規范 | Standard Specification for Welded Joints for Shipboard Piping Systems |
| ASTM F 771 | 聚乙烯(PE)熱塑高壓灌溉管道系統規范 | Standard Specification for Polyethylene (PE) Thermoplastic High-Pressure Irrigation Pipeline Systems |
| ASTM F 948 | 在恒定內流動壓力下塑料管道系統和組件損壞時間的標準試驗方法 | Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow |
| ASTM G 10 | 管道涂層比可彎性的試驗方法 | Standard Test Method for Specific Bendability of Pipeline Coatings |
| ASTM G 11 | 室外氣候老化對管道涂層的影響的標準試驗方法 | Standard Test Method for Effects of Outdoor Weathering on Pipeline Coatings |
| ASTM G 12 | 鋼制管道涂層厚度無損測量的試驗方法 | Test Method for Nondestructive Measurement of Film Thickness of Pipeline Coatings on Steel |
| ASTM G 14 | 管道涂層抗沖擊性的標準試驗方法(落錘試驗) | Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test) |
| ASTM G 17 | 管道涂層抗穿透性的試驗方法(鈍頭桿) | Standard Test Method for Penetration Resistance of Pipeline Coatings (Blunt Rod) |
| ASTM G 18 | 鍍層管道連接件,配件及搭接板的試驗方法 | Test Method for Joints, Fittings and Patches in Coated Pipelines |
| ASTM G 19 | 直接土埋法測定管道涂層抗剝落特性的標準試驗方法 | Standard Test Method for Disbonding Characteristics of Pipeline Coatings by Direct Soil Burial |
| ASTM G 20 | 管道涂層抗化學藥物腐蝕性的試驗方法 | Test Method for Chemical Resistance of Pipeline Coatings |
| ASTM G 42 | 在高溫條件下管道覆層陰極剝離合作用的試驗方法 | Standard Test Method for Cathodic Disbonding of Pipeline Coatings Subjected to Elevated Temperatures |
| ASTM G 55 | 評定管道涂覆搭接材料的試驗方法 | Test Method for Evaluating Pipeline Coating Patch Materials |
| ASTM G 6 | 管道涂層耐磨性的試驗方法 | Test Method for Abrasion Resistance of Pipeline Coatings |
| ASTM G 62 | 假期檢測管道覆層的測試方法 | Standard Test Methods for Holiday Detection in Pipeline Coatings |
| ASTM G 70 | 管道涂層環形可彎曲性的試驗方法(壓實試驗) | Test Method for Ring Bendability of Pipeline Coatings (Squeeze Test) |
| ASTM G 8 | 管道涂層陰極剝離的標準試驗方法 | Standard Test Methods for Cathodic Disbonding of Pipeline Coatings |
| ASTM G 80 | 管道覆層比陰極剝落性的試驗方法 | Test Method for Specific Cathodic Disbonding of Pipeline Coatings |
| ASTM G 9 | 管道涂層滲水性的試驗方法 | Test Method for Water Penetration into Pipeline Coatings |
| ASTM G 95 | 管道覆層陰極剝離檢測的測試方法(化學腐蝕電解槽法) | Test Method for Cathodic Disbondment Test of Pipeline Coatings (Attached Cell Method) |
| IEEE 1235 | 地下電力電纜和管道用可識別護套的性能指南 | (Guide for the properties of identifiable jackets for underground power cables and ducts) |
| IEEE 622A | 發電站管道電加熱控制及報警系統的設計及安裝用推薦規程 | (Recommended practice for the design and installation of electric pipe heating control and alarm systems for power generating stations) |
| IEEE 628 | 核電站1E級電路的電纜管道系統的設計、安裝和鑒定標準 | (Criteria for the design, installation, and qualification of raceway systems for class 1E circuits for nuclear power generating stations) |
| UL 1713 | 地下消防設備用玻璃纖維增強壓力管道和管聯接器 | (Pressure pipe and couplings, glass fiber-reinforced, for underground fire service ) |
| UL 1812 | 管道熱回收通風機 | (Ducted heat recovery ventilators ) |
| UL 1815 | 非管道熱回收通風機 | (Nonducted heat recovery ventilators ) |
| UL 181A | 同剛性空氣管道及空氣連接管一起使用的密閉系統 | (Closure systems for use with rigid air ducts and air connectors ) |
| UL 1951 | 電線管道附件 | (Electric plumbing accessories ) |
| UL 2221 | 耐火潤滑脂輸送管道附件的試驗 | (Tests of fire resistive grease duct enclosure ) |
| UL 268A | 管道煙霧探測器 | (Smoke detectors for duct application ) |
| UL 5 | 地面金屬電纜管道和配件 | (Surface metal raceways and fittings ) |
| UL 567 | 石油產品和液化石油氣用管道連接器 | (Pipe connectors for petroleum products and LP-Gas ) |
| UL 5A | 地面非金屬電纜管道和配件 | (Nonmetallic surface raceways and fittings ) |
| UL 5B | 支撐式管道和配件 | (Strut-type channel raceways and fittings ) |
| UL 5C | 用于數據,信號和控制線路的地面電纜管道和配件 | (Surface raceways and fittings for use with data, signal, and control circuits ) |
| UL 971 | 輸送可燃液體用非金屬地下管道 | (Nonmetallic underground piping for flammable liquids ) |
| 編號 | 中文名稱 | 英文名稱 |