微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| JIS A0015 | 住宅管道裝置的模數協調尺寸 | Modular co-ordinating sizes of piping unit for dwellings |
| JIS A4009 | 空氣管道組件 | Components of air duct |
| JIS A4413 AMD 1 | 住宅用管道裝置(修改件1) 住宅用配管ユニット（追補１） | Piping units for dwellings (Amendment 1) |
| JIS A4413 | 住宅用管道裝置 住宅用配管ユニット | Piping units for dwellings |
| JIS B0011-1 | 技術制圖.管道的簡化表示法.第1部分:總則和正交表示法 | Technical drawings -- Simplified representation of pipelines -- Part 1: General rules and orthogonal representation |
| JIS B0011-2 | 技術制圖.管道的簡化表示法.第2部分:等容表示法 | Technical drawings -- Simplified representation of pipelines -- Part 2: Isometric representation |
| JIS B0011-3 | 技術制圖.管道的簡化表示法.第3部分:通風和排水系統的終端部件 | Technical drawings -- Simplified representation of pipelines -- Part 3: Terminal features of ventilation and drainage systems |
| JIS B0109-4 | 往復式內燃機.元件和系統詞匯.第4部分:增壓和空氣/排氣管道系統 | Reciprocating internal combustion engines -- Vocabulary of components and systems -- Part 4: Pressure charging and air/exhaust gas ducting systems |
| JIS B2293 | 真空技術.管道配件.裝配尺寸 | Vacuum technology -- Pipeline fittings -- Mounting dimensions |
| JIS B8471 | 水管道.電磁閥 | Water pipe line -- Solenoid valves |
| JIS B8472 | 蒸汽管道.電磁閥 | Steam pipe line -- Solenoid valves |
| JIS B8473 | 燃油管道.電磁閥 | Fuel oil pipe line -- Solenoid valves |
| JIS B8602 | 致冷劑管道法蘭盤 | Pipe flanges for refrigerants |
| JIS B8615-1 | 非管道式空調和熱泵.性能試驗和評定 | Non-ducted air conditioners and heat pumps -- Testing and rating for performance |
| JIS B8615-2 | 管道通風空調和空氣對空氣熱泵.性能的試驗和額定值 | Ducted air-conditioners and air-to-air heat pumps -- Testing and rating for performance |
| JIS B8627-2 | 燃氣發動機驅動的熱泵空調器.第2部分:無管道輸送的燃氣發動機驅動的熱泵空調器.性能的試驗和額定值 | Gas engine driven heat pump air conditioners -- Part 2: Non-ducted gas engine driven heat pump air conditioners -- Testing and rating for performance |
| JIS B8627-3 | 燃氣發動機驅動的熱泵空調器.第3部分:有管道輸送的燃氣發動機驅動的熱泵空調器.性能的試驗和額定值 | Gas engine driven heat pump air conditioners -- Part 3: Ducted gas engine driven heat pump air conditioners -- Testing and rating for performance |
| JIS B9939-2 | 液壓流體動力.測量技術.第2部分:封閉管道中平均穩態壓力的測量 | Hydraulic fluid power -- Measurement techniques -- Part 2: Measurement of average steady-state pressure in a closed conduit |
| JIS C8425 | 室內配線用塑料面配線管道 | Plastic surface raceways for interior wiring |
| JIS D3607-1 | 柴油發動機.高壓燃料噴射管道用鋼制管件.第1部分:無縫冷拉單壁管件的要求 ディーゼル機関 ― 高圧燃料噴射管の鋼管 ― 第１部：冷間仕上継目無単層鋼管の要求事項 | Diesel engines -- Steel tubes for high-pressure fuel injection pipes -- Part 1: Requirements for seamless cold-drawn single-wall tubes |
| JIS D3607-2 | 柴油發動機.高壓燃料噴射管道用鋼制管件.第2部分:復合管件的要求 ディーゼル機関 ― 高圧燃料噴射管の鋼管 ― 第２部：複合鋼管の要求事項 | Diesel engines -- Steel tubes for high-pressure fuel injection pipes -- Part 2: Requirements for composite tubes |
| JIS F0014 | 造船術語匯編.（船體部分.管道） | Glossary of terms for shipbuilding (Hull part -- Piping) |
| JIS F0301 | 小船管道系統絕熱方案 | Schemes of thermal insulation of piping for small ships |
| JIS F0302 | 造船.小船空調管道絕熱作業標準操作規程 | Shipbuilding -- Standard practice for thermal insulation work for small ships' airconditioning ducts |
| JIS F0602 | 造船.輸油管道系統非石棉襯墊.應用標準 | Shipbuilding -- Non-asbestos gaskets to cargo piping system -- Application standard |
| JIS F3995 | 挖泥船排放管道的橡膠套管 | Rubber sleeves for dredge discharge pipes |
| JIS F7005 | 船舶管道系統的識別 | Identification of piping system on board ships |
| JIS F7006 | 造船.管道系統.圖形符號 | Shipbuilding -- Piping systems -- Graphic symbols |
| JIS F7008 | 管道隔熱標準規范 | Standard specification of thermal insulation for piping |
| JIS F7101 | 造船.機械設備的管道.標準流速 船舶機関部配管 ― 標準流速 | Shipbuilding -- Pipes of machinery -- Standard velocity of flow |
| JIS F7203 | 造船.機械設備空間和管道的艙底泥盒.一般設計特性 | Shipbuilding -- Bilge mud boxes for machinery spaces and tunnels -- General design characteristics |
| JIS F7211 | 造船.帶5K閥門的管道玻璃類型液位表 | Shipbuilding -- Tube glass type level gauges with 5K valves |
| JIS F7212 | 造船.帶自鎖閥門的管道玻璃類型液位表 | Shipbuilding -- Tube glass type level gauges with self closing valves |
| JIS G3132 | 管道用熱軋?zhí)妓劁搸Р? | Hot-rolled carbon steel strip for pipes and tubes |
| JIS G5525 | 鑄鐵排水管道和管件 | Cast-iron drainage pipes and fittings |
| JIS G5528 AMD 1 | 球墨鑄鐵管道及配件內壁用環氧粉末覆層(修改件1) | Epoxy-powder coating for interior of ductile iron pipes and fittings (Amendment 1) |
| JIS H0515 | 鈦管道和管件的渦流檢驗 | Eddy current inspection of titanium pipes and tubes |
| JIS H0516 | 鈦管道和管件的超聲波檢驗 | Ultrasonic inspection of titanium pipes and tubes |
| JIS K0804 | 氣體檢測器管道測量系統(污染長度型) | Gas detector tube measurement system (Length-of-stain type) |
| JIS K6795 | 交叉鏈接聚乙烯管道(PE-X).預定強度下的時間和溫度效應 | Crosslinked polyethylene (PE-X) pipes -- Effect of time and temperature on the expected strength |
| JIS K6796 | 交叉鏈接聚乙烯(PE-X)制管道和配件.用膠含量測定法評估交叉鏈接程度 | Pipes and fitting made of crosslinked polyethylene (PE-X) -- Estimation of the degree of crosslinking by determination of the gel content |
| JIS K6812 | 聚烯烴管道、配件和復合物中顏料或炭黑分散程度的評估方法 | Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds |
| JIS K7013 | 增強式纖維塑料管道 | Fibre reinforced plastic pipes |
| JIS K7014 | 增強式纖維塑料管道用配件和接頭 | Fittings and joints for fibre reinforced plastic pipes |
| JIS K7020 | 玻璃纖維增強熱固性塑料(GRP)管道和配件.回歸分析方法及其應用 | Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Methods for regression analysis and their use |
| JIS K7030 | 玻璃纖維增強熱固性塑料(GRP)制管道和配件.與壓力相關的術語定義、包括術語之間的關系及安裝和連接的術語 | Pipes and fittings made of glass fiber reinforced thermosetting plastics (GRP) -- Definitions of terms relating pressure, including relationship between them, and terms for installation and jointing |
| JIS K7031 | 塑料管道系統.玻璃纖維增強熱固性塑料(GRP)管道和配件.在短期內壓下管壁密封性檢定的試驗方法 | Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the leaktightness of the wall under short-term internal pressure |
| JIS K7032 | 塑料管道系統.玻璃增強熱塑(GRP)管道.初始的特定環硬性的測定 | Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of initial specific ring stiffness |
| JIS K7033 | 塑料管道系統.玻璃纖維增強熱固性塑料(GRP)制管道.初始拉伸性能的測定 | Plastics piping systems -- Pipes made of glass-reinforced thermosetting plastics (GRP) -- Determination of initial tensile properties |
| JIS K7034 | 塑料管道系統.玻璃纖維增強熱固性塑料(GRP)管道和配件.在偏移條件下內截面耐化學侵蝕的測定 | Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Determination of the resistance to chemical attack from the inside of a section in a deflected condition |
| JIS K7035 | 塑料管道系統. 玻璃纖維增強熱固性塑料(GRP)管道.在潮濕條件下蠕變因子的測定和長期特定環硬度的計算 | Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the creep factor under wet conditions and calculation of the long-term specific ring stiffness |
| JIS K7036 | 塑料管道系統. 玻璃纖維增強熱固性塑料(GRP)管道和配件.螺栓連接的法蘭接頭設計的檢定試驗方法 | Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of bolted flange joints |
| JIS K7037 | 塑料管道系統. 玻璃纖維增強熱固性塑料(GRP)管道.表觀初始圓周拉伸強度的測定 | Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the apparent initial circumferential tensile strength |
| JIS K7038 | 塑料管道系統. 玻璃纖維增強熱固性塑料(GRP)管道.初始環偏移度抗性檢定的試驗方法 | Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Test method to prove the resistance to initial ring deflection |
| JIS K7039 | 塑料管道系統.玻璃纖維增強熱固性塑料(GRP)管道.在潮濕條件下長期最終彎曲應力的測定和長期最終相應環偏移 | Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the long-term ultimate bending strain and calculation of the long-term ultimate relative ring deflection, both under wet conditions |
| JIS K7040 | 塑料管道系統.玻璃纖維增強熱固性塑料(GRP)部件.用重量分析法測定成分的總量 | Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) components -- Determination of the amounts of constituents using the gravimetric method |
| JIS K7042 | 塑料管道系統.玻璃纖維增強熱固性塑料(GRP)管道和配件.粘合的或繞接的鋼性接頭設計的檢定試驗方法 | Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of cemented or wrapped rigid joints |
| JIS T7101 | 醫療氣體管道系統 | Medical gas pipeline systems |
| JIS Z2287 | 鍋爐管道金屬材料的蒸汽氧化試驗方法 | Method for steam oxidation test of boiler tube metallic materials |
| JIS Z3050 | 管道焊接的無損檢測方法 | Method of nondestructive examination for weld of pipeline |
| 編號 | 中文名稱 | 英文名稱 |