微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ANSI B93.95M | 液壓氣動用容積式泵、馬達、整體傳輸.穩態性能的測量 | Hydraulic Fluid Power - Positive Displacement Pumps, Motors, and Integral Transmissions - Determination of Steady-State Performance |
| ANSI Z21.40.1 | 燃氣、熱激活空氣調節和熱泵設施 | Gas-Fired, Heat Activated Air Conditioning and Heat Pump Appliances |
| ANSI Z21.40.1a | 燃氣激活空氣調節和熱泵器具的安全性和結構 | Safety and Construction of Gas-Fired, Heat Activated Air-Conditioning and Heat Pump Appliances |
| ANSI Z21.40.2 | 燃氣、工作激活空氣調節和熱泵器具（內然） | Gas-Fired, Work Activated Air-Conditioning and Heat Pump Appliances (Internal Combustion) |
| ANSI Z21.40.2a | 燃氣、工作激活空氣調節和熱泵器具(同 CGA 2.92a) | Gas-Fired, Work Activated Air-Conditioning and Heat Pump Appliances (Same as CGA 2.92a) |
| ANSI Z21.40.4 | 燃氣、空氣調節和熱泵器具的性能試驗和額定值 | Performance Testing and Rating of Gas-Fired, Air Conditioning and Heat Pump Appliances |
| ANSI Z21.40.4a | 燃氣、空氣調節和熱泵器具的性能試驗和額定值(同 CGA 2.94a) | Performance Testing and Rating of Gas-Fired, Air-Conditioning and Heat Pump Appliances (same as CGA 2.94a) |
| ANSI/AAMI ID26 | 醫療電氣設備.第2部分:注液泵和控制器安全的特殊要求 | Medical Electrical Equipment - Part 2: Particular Requirements for the Safety of Infusion Pumps and Controllers |
| ANSI/API 610 | 一般精煉設備用離心泵 | Centrifugal Pumps for General Refinery Services |
| ANSI/API 682 | 泵.離心泵和回轉泵的軸密封裝置 | Pumps - Shaft Sealing Systems for Centrifugal and Rotary Pumps |
| ANSI/API 685 | 用于石油、重型化工和燃氣行業的非密封離心泵 | Sealless Centrifugal Pumps for Petroleum, Heavy Duty Chemical and Gas Industry Services |
| ANSI/API RP-11S1 | 電潛水泵拆卸報告 | Electrical Submersible Pump Teardown Report |
| ANSI/API RP11S 1 | 電動潛水泵拆卸報告 | Electrical Submersible Pump Teardown Report |
| ANSI/ARI 310/380 | 組裝終端的空氣調節裝置與蒸汽泵 | Packaged Terminal Air-Conditioners and Heat Pumps |
| ANSI/ARI 330 | 地熱源閉合循環熱泵 | Ground Source Closed-Loop Heat Pumps |
| ANSI/ARI 340/360 | 商用和工業用統一空氣調節和熱泵設備 | Commercial and Industrial Unitary Air-Conditioning and Heat Pump Equipment |
| ANSI/ARI 500 | 空氣調節和熱泵設施用不同容積的容積式冷凍劑壓縮機和壓縮機部件 | Variable Capacity Positive Displacement Refrigerant Compressors and Compressor Units for Air-Conditioning and Heat Pump Applications |
| ANSI/ARI 870 | 直接土工交換熱泵 | Direct GeoExchange Heat Pumps |
| ANSI/ARI/ASHRAE/ISO 13256-1 | 水源熱力泵.性能試驗和額定值測量.第1部分:水-空氣和鹽水-空氣熱力泵 | Water-Source Heat Pumps - Testing and Rating for Performance: Part 1 - Water-to-Air and Brine-to-Air Heat Pumps |
| ANSI/ARI/ASHRAE/ISO 13256-2 | 水源熱力泵.性能試驗和額定值測量.第2部分:水-水和鹽水-水熱力泵 | Water-Source Heat Pumps - Testing and Rating for Performance: Part 2 - Water-to-Water and Brine-to-Water Heat Pumps |
| ANSI/ASHRAE 116 | 單體空調和熱泵季節熱效率的試驗方法 | Seasonal Efficiency of Unitary Air Conditioners and Heat Pumps, Methods of Testing for |
| ANSI/ASHRAE 37 | 電動整體空調和熱泵設備的額定值試驗方法 | Methods of Testing for Rating Electrically Driven Unitary Air-Conditioning and Heat Pump Equipment |
| ANSI/ASHRAE Standard116 | 單式空調器和熱泵的季節效應試驗方法 | Seasonal Efficiency of Unitary Air Conditioners and Heat Pumps, Methods of Testing for |
| ANSI/ASME A112.18.3 | 泵固定件接頭中防回流裝置和系統的性能要求 | Performance Requirements for Backflow Protection Devices and Systems in Plumbing Fixture Fittings |
| ANSI/ASME B73.1M | 化工用臥式端吸離心泵規范 | Horizontal End Suction Centrifugal Pumps for Chemical Process, Specifications for |
| ANSI/ASME B73.2M | 化工用立式直列式離心泵規范 | Vertical In-Line Centrifugal Pumps for Chemical Process, Specifications for |
| ANSI/ASME B73.5M | 化工用熱塑性和熱固性聚合材料臥式端吸離心泵規范 | Specification for Thermoplastic and Thermoset Polymer Material Horizontal End Suction Centrifugal Pumps for Chemical Process |
| ANSI/ASME PTC18 | 水輪機和泵.渦輪機 | Hydraulic Turbines and Pump - Turbines |
| ANSI/ASTM D2809 | 發動機冷卻劑對鋁泵的氣蝕和侵蝕特性測試方法 | Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps with Engine Coolants |
| ANSI/ASTM D3829 | 發動機油的邊界泵抽溫度的預測試驗(05.02) | Predicting the Borderline Pumping Temperature of Engine Oil, Test for (05.02) |
| ANSI/ASTM D6813a | 活塞泵的液壓流體性能的評定指南 | Guide for the Performance Evaluation of Hydraulic Fluids for Piston Pumps |
| ANSI/ASTM D6898 | 用噴油泵裝置評價柴油潤滑性的試驗方法 | Test Method for Evaluating Diesel Fuel Lubricity by an Injection Pump Rig |
| ANSI/ASTM D6973 | 高壓定容葉輪泵中石油液壓液耐磨特性指示的試驗方法 | Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump |
| ANSI/ASTM D7043a | 固定容量離心泵中石油和非石油液壓液磨損特性指示的試驗方法 | Test Method for Indicating Wear Characteristics of Petroleum and Non-petroleum Hydraulic Fluids in a Constant Volume Vane Pump |
| ANSI/ASTM F1510 | 商用船只旋轉式正排量泵規范 | Specification for Rotary Positive Displacement Pumps, Commercial Ships Use |
| ANSI/ASTM F1718 | 旋轉式正排量燃料泵規范 | Specification for Rotary Positive Displacement Fuel Pumps |
| ANSI/ASTM F998 | 船用離心泵規范 | Specification for Centrifugal Pump, Shipboard Use |
| ANSI/HI 1.1-1.2 | 離心泵.術語、定義、應用和操作 | Centrifugal Pumps - Nomenclature, Definitions, Application and Operation |
| ANSI/HI 1.3 | 離心泵.水平基板設計 | Centrifugal Pumps - Horizontal Baseplate Design |
| ANSI/HI 1.4 | 離心泵.命名、定義、應用和操作 | Centrifugal Pumps - Nomenclature, Definitions, Application and Operation |
| ANSI/HI 1.6 | 離心泵測試 | Centrifugal Pump Test |
| ANSI/HI 10.1-10.5 | 風動泵的名稱、定義、應用和操作 | Air-Operated Pumps for Nomenclature, Definitions, Application, and Operation |
| ANSI/HI 10.6 | 風動泵的試驗 | Air-Operated Pump Tests |
| ANSI/HI 11.6 | 潛水泵測試 | Submersible Pump Tests |
| ANSI/HI 12.1-12.6 | 離心式淤漿泵的名詞定義、應用和操作 | Rotodynamic Centrifugal Slurry Pumps For Nomenclature Definitions, Applications and Operation |
| ANSI/HI 2.1-2.2 | 立式泵的命名和定義 | Vertical Pumps for Nomenclature and Definitions |
| ANSI/HI 2.3 | 立式泵的設計和應用 | Vertical Pumps for Design and Application |
| ANSI/HI 2.4 | 立式泵.術語、定義、應用和操作 | Vertical Pumps for Nomenclature, Definitions, Application and Operation |
| ANSI/HI 2.6 | 立式泵測試 | Vertical Pump Test |
| ANSI/HI 3.1-3.5 | 旋轉式泵.術語、定義、應用和操作 | Rotary Pump Standards for Nomenclature, Definitions, Applications and Operation |
| ANSI/HI 3.6 | 旋轉式泵測試 | Rotary Pump Test |
| ANSI/HI 4.1-4.6 | 無密封旋轉式泵.術語、定義、應用、操作和測試 | Sealless Rotary Pumps - Nomenclature, Definitions, Applications, Operation and Test |
| ANSI/HI 5.1-5.6 | 無密封離心泵.術語、定義、應用、操作和測試 | Sealless Centrifugal Pumps for Nomenclature, Definitions, Application, Operation and Test |
| ANSI/HI 6.1-6.5 | 循環泵.術語、定義、應用和操作 | Reciprocating Power Pump Standards for Nomenclature, Definitions, Application, and Operation |
| ANSI/HI 6.6 | 循環泵測試 | Reciprocating Pump Test |
| ANSI/HI 8.1-8.5 | 蒸汽直動活塞泵.術語、定義、應用和操作 | Direct Acting Steam Pumps for Nomenclature, Definitions, Application, and Operation |
| ANSI/HI 9.1-9.5 | 泵通用標準.類型、定義、應用和聲測量 | General Pump Standards for Types, Definitions, Application, and Sound Measurements |
| ANSI/HI 9.3.3 | 泵:聚合材料選擇 | Pumps: Polymer Material Selection |
| ANSI/HI 9.6.2 | 離心泵和立式泵.最大噴嘴負荷 | Centrifugal and Vertical Pumps for Allowable Nozzle Loads |
| ANSI/HI 9.6.3 | 泵.允許操作范圍 | Pumps - Allowable Operating Region |
| ANSI/HI 9.6.4 | 離心泵和立式泵.振動測量和容許值 | Centrifugal and Vertical Pumps for Vibration Measurement and Allowable Values |
| ANSI/HI 9.6.5 | 離心泵和立式泵.狀況監測 | Centrifugal and Vertical Pumps for Condition Monitoring |
| ANSI/HI 9.6.7 | 液體粘度對旋轉動態(離心和立式)泵性能的影響 | Effects of Liquid Viscosity on Rotodynamic (Centrifugal and Vertical) Pump Performance |
| ANSI/HI 9.8 | 泵入口設計 | Pump Intake Design |
| ANSI/IEEE 1017 | 潛水電泵電纜的現場試驗推薦規范 | Recommended Practice for Field Testing Electric Submersible Pump Cable |
| ANSI/IEEE 1018 | 規定潛水電泵電纜用推薦規程.乙烯-丙烯橡膠絕緣 | Recommended Practice for Specifying Electric Submersible Pump Cable - Ethylene-Propylene Rubber Insulation |
| ANSI/IEEE 1019 | 規定潛水電泵電纜用推薦規程.聚丙烯絕緣 | Recommended Practice for Specifying Electric Submersible Pump Cable - Polypropylene Insulation |
| ANSI/NFPA 1911 | 消防部門的泵吸裝置的試驗 | Testing Fire Department Pumping Apparatus |
| ANSI/SAE J1668 | 柴油機燃油噴射泵的試驗 | Diesel Engines-Fuel Injection Pump Testing |
| ANSI/SAE J626 | 柴油噴射.燃料噴射泵用端頭安裝法蘭 | Diesel Fuel Injection - End Mounting Flanges for Fuel Injection Pumps |
| ANSI/TIA-455-212 | FOTP212.IEC 61290-6-1.光纖放大器.基礎規范.第6-1部分:泵泄漏參數的測試方法.光學多路分解器 | FOTP212 - IEC 61290-6-1 - Optical Fibre Amplifiers - Basic Specification Part 6-1: Test Methods for Pump Leakage Parameters- Optical Demultiplexer |
| ANSI/TIA/EIA 455-212 | FOTP212-IEC 61290-6-1-光纖放大器. 基本規范.第6-1部分:泵泄漏參數測試方法.光多路分配器 | FOTP212 - IEC 61290-6-1 - Optical Fibre Amplifiers - Basic Specification Part 6-1: Test Methods for Pump Leakage Parameters- Optical Demultiplexer |
| ANSI/UL 1247 | 驅動離心消防泵用柴油發動機 | Diesel Engines for Driving Centrifugal Fire Pumps |
| ANSI/UL 1450 | 電動空氣壓縮機、真空泵和涂漆設備的安全標準 | Standard for Safety for Motor-Operated Air Compressors, Vacuum Pumps, and Painting Equipment |
| ANSI/UL 1453 | 水加熱器、電增壓泵和商用貯水箱 | Water Heaters, Electric Booster and Commercial Storage Tank |
| ANSI/UL 1478 | 消防水泵減壓閥 | Fire Pump Relief Valves |
| ANSI/UL 218 | 消防泵控制器的安全標準 | Standard for Safety for Fire Pump Controllers |
| ANSI/UL 218A | 柴油發動機驅動的離心消防泵用蓄電池接觸器 | Battery Contactors for Use in Diesel Engines Driving Centrifugal Fire Pumps |
| ANSI/UL 448 | 消防泵 | Pumps for Fire Protection Service |
| ANSI/UL 51 | 用于液化石油氣和無水氨的動力操作泵 | Power-Operated Pumps for Anhydrous Ammonia and LP-Gas |
| ASME B5.28 | 機床潤滑和冷卻泵的裝配尺寸 | (Mounting dimensions of lubricating and coolant pumps for machine tools) |
| ASME B73.1 | 化工用臥式端吸離心泵規范 | (Specification for horizontal end suction centrifugal pumps for chemical process) |
| ASME B73.2M | 化工用立式直列式離心泵規范 | (Specification for vertical in-line centrifugal pumps for chemical process) |
| ASME B73.5M | 化工處理用熱塑和熱固性聚合材料制水平端頭吸入式離心泵規范 | (Specification for thermoplastic and thermoset polymer material horizontal end suction centrifugal pumps for chemical process) |
| ASME PTC 7 | 往復式蒸汽驅動活塞泵 | (Reciprocating steam-driven displacement pumps) |
| ASME PTC 7.1 | 活塞泵 | (Displacement pumps) |
| ASME PTC 8.2 | 離心泵 | (Centrifugal pumps) |
| ASME PTC 9 Erratum | 容積式壓縮機,真空泵和鼓風機.正誤表 | (Displacement compressors, vacuum pumps, and blowers; Erratum) |
| ASME PTC 9 | 容積式壓縮機,真空泵和鼓風機 | (Displacement compressors, vacuum pumps, and blowers) |
| ASME Y14.40.9 | 圖示用圖形符號.第9部分:泵、壓縮機和風扇 | (Graphical symbols for diagrams - Part 9: Pumps, compressors and fans) |
| ASTM D 2809 | 帶有發動機冷卻劑的鋁泵的氣蝕和侵蝕特性的標準試驗方法 | Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants |
| ASTM D 3245 | 工業燃油的泵抽油能力標準試驗方法 | Standard Test Method for Pumpability of Industrial Fuel Oils |
| ASTM D 3829 | 預測發動機油邊界泵送溫度的標準試驗方法 | Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil |
| ASTM D 3890 | 起動機械泵計量器的行程數的標準試驗方法 | Standard Test Method for Number of Strokes to Prime a Mechanical Pump Dispenser |
| ASTM D 4041 | 測定手動泵分配器噴射模式的標準試驗方法 | Standard Test Method for Determining Spray Patterns of Manually Operated Pump Dispensers |
| ASTM D 4133 | 用泵取樣可繁殖海洋浮游生物的標準實施規程 | Standard Practice for Sampling Phytoplankton with Pumps |
| ASTM D 4333 | 機械泵計量器元件不兼容性的標準試驗方法 | Test Method for the Compatibility Resistance of Mechanical Pump Dispenser Components |
| ASTM D 4334 | 測定機械泵計量器浸入管保持力的標準試驗方法 | Standard Test Method for the Determination of the Dip Tube Retention of a Mechanical Pump Dispenser |
| ASTM D 4335 | 機械泵加注器元件保持力測定的標準試驗方法 | Standard Test Method for Determination of Component Retention of a Mechanical Pump Dispenser |
| ASTM D 4336 | 測定機械泵計量器每行程輸出功率的標準試驗方法 | Standard Test Methods for Determination of the Output Per Stroke of a Mechanical Pump Dispenser |
| ASTM D 5337 | 小型取樣泵校正用流率的標準規程 | Standard Practice for Flow Rate for Calibration of Personal Sampling Pumps |
| ASTM D 6034 | 通過一連續比率的泵試驗對限制性含水層內生產井效率測定的標準試驗方法 | Standard Test Method (Analytical Procedure) for Determining the Efficiency of a Production Well in a Confined Aquifer from a Constant Rate Pumping Test |
| ASTM D 6534 | 測定機械泵分配器最大推動力的標準試驗方法 | Standard Test Method for Determining the Peak Force-to-Actuate a Mechanical Pump Dispenser |
| ASTM D 6535 | 測定機械泵計量器浸入管長度的標準試驗方法 | Standard Test Method for Determining the Dip Tube Length of a Mechanical Pump Dispenser |
| ASTM D 6536 | 測定機械泵計量器浸入管長度的標準試驗方法 | Standard Test Method for Measuring the Dip Tube Length of a Mechanical Pump Dispenser |
| ASTM D 6633 | 機械泵分配器的基本功能穩定性的標準試驗方法 | Standard Test Method for Basic Functional Stability of a Mechanical Pump Dispenser |
| ASTM D 6654 | 機械泵分配器基本儲存穩定性的標準試驗方法 | Standard Test Method for Basic Storage Stability of a Mechanical Pump Dispenser |
| ASTM D 6655 | 與機械泵分配器有關的標準術語 | Standard Terminology Relating to Mechanical Pump Dispensers |
| ASTM D 6813a | 活塞泵的液壓液性能評定的標準指南 | Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps |
| ASTM D 6834 | 測定有機械泵分配器的包裝的產品泄漏率的標準試驗方法 | Standard Test Method for Determining Product Leakage from a Package with a Mechanical Pump Dispenser |
| ASTM D 6898 | 用噴油泵裝置評價柴油潤滑性的標準試驗方法 | Standard Test Method for Evaluating Diesel Fuel Lubricity by an Injection Pump Rig |
| ASTM D 6973 | 高壓定容葉輪泵中石油液壓液磨損特性指示的標準試驗方法 | Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump |
| ASTM D 7043a | 定容葉輪泵中石油和非石油液壓液的磨損特性指示的標準試驗方法 | Standard Test Method for Indicating Wear Characteristics of Petroleum and Non-Petroleum Hydraulic Fluids in a Constant Volume Vane Pump |
| ASTM E 1198 | 用泵對浮游生物取樣的標準實施規程 | Standard Practice for Sampling Zooplankton with Pumps |
| ASTM E 295 | 測量油擴散泵速度的試驗方法 | Standard Test Method for Measured Speed of Oil Diffusion Pumps |
| ASTM F 1510 | 商業船用旋轉式正排量泵標準規范 | Standard Specification for Rotary Positive Displacement Pumps, Commercial Ships Use |
| ASTM F 1607 | 漏油響應泵試驗性能數據報告的標準指南 | Standard Guide for Reporting of Test Performance Data for Oil Spill Response Pumps |
| ASTM F 1718 | 旋轉式正排量蒸餾燃油泵標準規范 | Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps |
| ASTM F 1830 | 評價玻璃試管內血泵用血液的選擇的標準操作規程 | Standard Practice for Selection of Blood for In Vitro Evaluation of Blood Pumps |
| ASTM F 1841 | 連續流動血泵里溶血評定的標準操作規程 | Standard Practice for Assessment of Hemolysis in Continuous Flow Blood Pumps |
| ASTM F 998 | 船用離心泵標準規范 | Standard Specification for Centrifugal Pump, Shipboard Use |
| UL 1004A | 消防泵電動機 | (Fire pump motors ) |
| UL 1113 | 船舶不可燃液體用電動泵 | (Electrically operated pumps for nonflammable liquids, marine ) |
| UL 1130 | 船用機械和電子控制燃油泵 | (Mechanically and electrically operated fuel pumps for marine use ) |
| UL 1207 | 危險場所用污水泵 | (Sewage pumps for use in hazardous (classified) locations ) |
| UL 1247 | 防火離心泵驅動用柴油機 | (Diesel engines for driving centrifugal fire pumps ) |
| UL 1450 | 電動空氣壓縮機、真空泵和噴漆設備 | (Motor-operated air compressors, vacuum pumps, and painting equipment) |
| UL 1478 | 消防泵減壓閥 | (Fire pumps relief valves ) |
| UL 218 | 防火泵控制器 | (Fire pump controllers ) |
| UL 218A | 柴油機中驅動離心點火泵用電池接頭標準 | (Standard for battery contactors for use in diesel engines driving centrifugal fire pumps ) |
| UL 343 | 燃油設備用泵 | (Pumps for oil-burning appliances ) |
| UL 448 | 消防裝置用泵 | (Pumps for fire-protection service ) |
| UL 51 | 使用無水液氨和液化石油氣的動力操縱泵 | (Power-operated pumps for anhydrous ammonia and LP-gas ) |
| UL 778 | 電動水泵 | (Motor-operated water pumps ) |
| UL 79 | 石油產品輸送系統用動力泵 | (Power-operated pumps for petroleum dispensing products ) |
| 編號 | 中文名稱 | 英文名稱 |