微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| DIN 1184-1 | 泵站.設計.建造和運行 | Pumping stations; design, construction and operation |
| DIN 1184-2 | 泵站.帶濾網運行的離心泵.設計用指導性文件 | Pumping stations; centrifugal pumps for operation with screen; directives for planning |
| DIN 1184-3 | 泵站.不帶濾網運行的離心泵.設計用指導性文件 | Pumping stations; centrifugal pumps for operation without screen; directives for planning |
| DIN 1184-4 | 泵站.螺旋泵(螺桿水泵)設計用指導性文件 | Pumping stations; archimedian screw pumps; directives for planning |
| DIN 14405 | 活塞式抽水泵 | Bucket pump |
| DIN 14420 | 消防泵.消防離心泵.消防車在安裝真空面和壓力面組件后的試驗要求 | Fire-fighting pumps - Fire-fighting centrifugal pumps - Requirements for the suction-sided and pressure-sided assembly, test after installation in the fire-fighting vehicle |
| DIN 14421 | 消防泵用壓力表(測壓表) | Pressure gauges (manometer) for fire pumps |
| DIN 14423 | 消防用水泵和水槽的過濾網 | Sieves for pumps and reservoirs for fire fighting |
| DIN 14424 | 消防設備.帶電動機的防爆可攜式傳送泵.要求、類型和驗收試驗 | Firefighting equipment - Explosion-proof portable transfer pump with electric motor - Requirements, type and acceptance test |
| DIN 14425 | 防火.帶電動機的可攜式潛水泵 | Fire fighting purposes - Portable submersible pumps with electrical motor |
| DIN 14426 | 消防隊用輕便式渦輪潛水泵 | Portable submerged turbopump for fire brigade |
| DIN 14427 | 消防設備.帶電動機的防爆便攜式危險液體用傳送泵.要求、檢驗 | Firefighting equipment - Explosion-proof portable transfer pump for dangerous fluids, with electric motor - Requirements, testing |
| DIN 14530-16 | 消防車.第16部分:泵抽吸裝置TSF | Fire fighting vehicles - Part 16: Pumping appliance TSF |
| DIN 14530-16/A1 | 消防車輛.第16部分:TSF泵送設施.修改件A1 | Fire fighting vehicles - Part 16: Pumping appliance TSF; Amendment A1 |
| DIN 14530-17 | 消防車輛.第17部分:TSF-W泵送設備 | Fire fighting vehicles - Part 17: Pumping appliance TSF-W |
| DIN 14530-21 | 消防車.第21部分:泵送水罐車TLF 20/40、泵送水罐車TLF 20/40-SL | Firefighting vehicles - Part 21: Pump water tanker TLF 20/40, Pump water tanker TLF 20/40-SL |
| DIN 14530-24 | 消防車輛.第2部分:小泵應用KLF | Fire fighting vehicles - Part 24: Small pumping appliance KLF |
| DIN 14751-4 | 消防隊用液壓操作救援器械.第4部分: 帶綜合泵和/或電源的雙重作用的液壓式救援器械 | Hydraulically operated rescue apparatus for fire brigade use - Part 4: Double acting hydraulic rescue tools with integrated pump and/or power source |
| DIN 24117 | 建筑機械和建筑材料工業用機械.混凝土泵用分配桿.計算原則和穩定性 | Machines for the building and building-material industries; distributing mast for concrete pumps; principles of calculation and stability |
| DIN 24250 | 離心泵.元件的名稱和編號 | Centrifugal pumps; denomination and numbering of components |
| DIN 24251 | 多級離心泵.轉數1500l/min時揚程為1000米的礦用抽水泵 | Multistage centrifugal pumps; mine drainage pumps, with pump total head up to 1000 m at speed of rotation 1500 l/min |
| DIN 24259-1 | 泵.機器的底座、尺寸 | Pumps; baseplates for machines, dimensions |
| DIN 24273 | 液體泵和泵裝置.材料及產品試驗 | Pumps and pump units for liquids - Material and product tests |
| DIN 24289-1 | 往復式活塞泵和泵組件.第1部分:要求與試驗 | Reciprocating displacement pumps and pump units; requirements and testing |
| DIN 24289-2 | 往復式正排量泵和泵組件規范.第2部分:數據活頁信息 | Reciprocating positive displacement pumps and pump units; specifications; data sheet information |
| DIN 24290 | 噴射泵.術語、分類 | Jet pumps (ejectors); terms, classification |
| DIN 24291 | 噴射泵（噴射器）.零件名稱 | Jet pumps (ejectors); denomination of parts |
| DIN 24296 | 液體泵和泵裝置.備件.選擇和購置 | Pumps and pump units for liquids - Spare parts - Selection and procurement |
| DIN 24299-1 | 泵用銘牌.通用規范 | Name plates for pumps; general specification |
| DIN 24299-2 | 泵用銘牌.表面處理用活塞泵和隔膜泵 | Name plates for pumps; piston pumps and diaphragm pumps for surface treatment |
| DIN 24331 | 液壓流體力學.液壓泵和液壓馬達、幾何排量-容量、流量 | Oilhydraulic; hydraulic pumps and hydraulic engines, geometrical displacement-volume, rates |
| DIN 24374-1 | 表面處理.第1部分:空氣傳動活塞泵的特性測定 | Surface treatment; determination of characteristics of air driven piston pumps |
| DIN 28400-2 | 真空技術.真空泵的術語和定義 | Vacuum technology; terms and definitions, vacuum pumps |
| DIN 28426-1 | 真空技術.近似真空和中等真空范圍用旋轉柱塞真空泵、葉片式旋轉真空泵和旋轉式活塞真空泵驗收規范 | Vacuum technology; acceptance specifications for rotary plunger vacuum pumps, sliding vane rotary vacuum pumps and rotary piston vacuum pumps for the ranges of rough and medium vacuum |
| DIN 28426-2 | 真空技術.中等級真空范圍用羅茨真空泵的驗收規范 | Vacuum technology; acceptance specifications for roots vacuum pumps for the range of medium vacuum |
| DIN 28427 | 真空技術.流體蒸氣壓低于1mbar的擴散泵和蒸氣噴射真空泵的驗收規范 | Vacuum technology; acceptance specifications for diffusions pumps and vapour jet vacuum pumps for vapour pressures of the pump fluid 1 mbar |
| DIN 28428 | 真空技術.渦輪分子泵的驗收規則 | Vacuum technology; acceptance specifications for turbomolecular pumps |
| DIN 28429 | 真空技術.濺射離子泵驗收規范 | Vacuum technology - Acceptance specifications for getter ion pumps |
| DIN 28430 | 真空技術.以蒸汽作為驅動介質的蒸汽噴射真空泵和蒸汽噴射壓縮機的測量規則 | Vacuum technology; rules for the measurement of steam jet vacuum pumps and steam jet compressors using steam as the working fluid |
| DIN 28431 | 真空技術.液體環式真空泵的驗收規范 | Vacuum technology; acceptance specifications for liquid ring vacuum pumps |
| DIN 28432 | 真空技術.膜片真空泵驗收規范 | Vacuum technology - Acceptance specifications for diaphragm vacuum pumps |
| DIN 33830-1 | 熱泵.整套熱吸收式泵裝置.概念、要求、檢驗、標記 | Heat pumps; complet absorption pump units; concepts, requirements, testing, marking |
| DIN 33830-3 | 熱泵.熱吸收式泵裝置.制冷技術的安全性.檢驗 | Heat pumps; absorption heat pump units; refrigeration safety, testing |
| DIN 33830-4 | 熱泵.吸熱泵設備.性能和運行試驗 | Heat pumps; absorption heat pump units; performance and operational tests |
| DIN 33831-1 | 熱力泵.可與內燃發動機驅動的壓縮機連接的熱力泵.第1部分:術語、要求、檢驗、標記 | Heat pumps; ready to use heat pump units with internal combustion engine driven compressors; terminology, requirements, testing, marking |
| DIN 33831-2 | 熱力泵.可與內燃發動機驅動的壓縮機連接的熱力泵.第2部分:氣體設備的要求、檢驗 | Heat pumps; ready to use heat pump units with internal combustion engine driven compressors, requirements on the gas equipment, testing |
| DIN 33831-3 | 熱力泵.可與內燃發動機驅動的壓縮機連接的熱力泵.第3部分:額定值和性能試驗條件 | Heat pumps; ready to use heat pump units with internal combustion engine driven compressors; rating and performance testing conditions |
| DIN 33831-4 | 熱力泵.可與內燃發動機驅動的壓縮機連接的熱力泵.第4部分:空氣/水熱力泵的額定值和性能檢驗 | Heat pumps; ready to use heat pump units with internal combustion engine driven compressors; rating and performance testing of air/water heat pumps |
| DIN 42018 | 家用電氣機器用排水泵.連接尺寸和檢驗 | Drain pumps for use in electric domestic machines; connection dimensions and test |
| DIN 42023-2 | 燃油爐用附加電機.第2部分:油泵的安裝尺寸 | Built-on Motors for Oil Burners; Mounting Dimensions for the Mounting of the Oil Pump |
| DIN 4325 | 蓄水泵的現場驗收試驗 | Field acceptance tests of storage pumps |
| DIN 45635-26 | 機器空氣噪聲的測量.包絡面法.液壓泵 | Measurement of airborne noise emitted by machines; enveloping surface method, hydraulic pumps |
| DIN 45635-40 | 機器空氣噪聲的測量.空氣噪聲測量.包絡面法.水力發電站機組和水泵設備 | Measurement of airborne noise emitted by machines; enveloping surface method; machine sets in hydroelectric power stations and water pumping plants |
| DIN 51389-1 | 潤滑劑的測定.葉片泵液壓流體的機械檢驗.第1部分:一般工作原則 | Determination of lubricants; mechanical testing of hydraulic fluids in the vane-cell-pump; general working principles |
| DIN 51389-2 | 潤滑劑的測定.葉片泵液壓流體的機械檢驗.第2部分:無水液壓流體的 A 方法 | Determination of lubricants; mechanical testing of hydraulic fluids in the vane-cell-pump; method A foranhydrous hydraulic fluids |
| DIN 51389-3 | 潤滑劑的檢測.葉輪泵中液壓流體的機械試驗.第3部分:含水不易燃液壓流體的B試驗方法 | Determination of lubricants - Mechanical testing of hydraulic fluids in the vane-cell-pump - Part 3: Method B for aqueous not easily inflammable hydraulic fluids |
| DIN 5435 | 手動泵.公稱壓力為1至2.5的帶肩的雙孔法蘭 | Hand-pumps; two hole tube flanges with shoulder, for nominal pressure 1 to 2,5 |
| DIN 5437 | 手動泵.葉輪泵.規格，性能和尺寸 | Hand pumps; semirotary pumps; sizes, performance and dimensions |
| DIN 69001-17 | 機床.多軸頭.組合式A型潤滑油泵 | Machine tools; multi-spindle heads; building blocks lubrication pumps form A |
| DIN 73365-3 | 柴油機噴射泵.第3部分:壓力管道連接件 | Injection pumps for Diesel engines; pressure pipe connections |
| DIN 85005-14 | 船舶和海上技術.技術文獻的圖形符號.第14部分:泵、過濾器、分離器和干燥器 | Ships and marine technology - Graphical symbols for technical documentation - Part 14: Pumps, filters, separators, dryers |
| DIN 87901 | 泵用雙向安全閥 | Sniffle valves for pumps |
| DIN 8900-6 | 熱泵.帶電動壓縮機的熱泵裝置設備.用于安裝的水/水、空氣/水和鹽水/水熱泵的測量方法 | Heat pumps; heat pump units equipment with electrically driven compressors, methods of measurement for installed water/water, air/water and brine/water heat pumps |
| DIN 8901 | 制冷系統和加熱泵.土壤、土地和地表水的保護.安全性和環境要求與試驗 | Refrigerating systems and heat pumps - Protection of soil, ground and surface water - Safety and environmental requirements and testing |
| DIN 8930-5 | 制冷系統和熱泵.術語.第5部分:收縮式 | Refrigerating systems and heat pumps - Terminology - Part 5: Contracting |
| DIN 8947 | 加熱泵.水加熱的電動壓縮機加熱泵裝置.概念、要求和試驗 | Heat pumps; heat pump units with electrically driven compressors for water heating; concepts, requirements, testing |
| DIN 8957-4 | 空調器.第4部分:制冷系統/熱力泵的熱起動試驗 | Air conditioners; tests for heating operation of the refrigerating system/heat pump |
| DIN CEN/TS 14825 | 空間加熱和制冷用帶電力驅動壓縮機的空調、液體制冷包和熱泵.部分負載條件下的試驗和分級 | Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Testing and rating at part load conditions; German version CEN/TS 14825:2003 |
| DIN EN 1012-1 | 壓縮機和真空泵.安全性要求.第1部分:壓縮機 | Compressors and vacuum pumps, safety requirements - Part 1: Compressors; German version EN 1012-1:1996 |
| DIN EN 1012-2 | 壓縮機和真空泵.安全性要求.第2部分:真空泵 | Compressors and vacuum pumps, safety requirements - Part 2: Vacuum pumps; German version EN 1012-2:1996 |
| DIN EN 1028-1 | 消防泵.帶起動注油器的消防離心泵.第1部分:分類、總則和安全要求; 德文版本 EN 1028-1:2002 | Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 1: Classification; General and safety requirements; German version EN 1028-1:2002 |
| DIN EN 1028-2 | 消防泵.帶起動注油器的消防離心泵.第2部分:總則和安全要求的檢定; 德文版本 EN 1028-2:2002 | Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 2: Verification of general and safety requirements; German version EN 1028-2:2002 |
| DIN EN 1076 | 工作場所大氣.測定氣體和蒸汽用泵吸附管 | Workplace atmospheres - Pumped sorbent tubes for the determination of gases and vapours - Requirements and test methods; German version EN 1076:1997 |
| DIN EN 12157 | 旋轉泵.車床的冷卻業泵組.公稱流量率和尺寸 | Rotodynamic pumps - Coolant pump units for machine tools - Nominal flow rate, dimensions; German version EN 12157:1999 |
| DIN EN 12162 | 液體泵.安全要求.靜液壓試驗過程 | Liquid pumps - Safety requirements - Procedure for hydrostatic testing; German version EN 12162:2001 |
| DIN EN 12178 | 制冷系統及熱泵.液位指示設備.要求、試驗和標記 | Refrigerating systems and heat pumps - Liquid level indicating devices - Requirements, testing and marking; German version EN 12178:2003 |
| DIN EN 12262 | 旋轉泵.技術文件.術語、交貨范圍和結構設計 | Rotodynamic pumps - Technical documents - Terms, delivery range, layout; German version EN 12262:1998 |
| DIN EN 12263 | 制冷設備和熱力泵.壓力極限用安全開關設備.要求和試驗 | Refrigerating systems and heat pumps - Safety switching devices for limiting the pressure - Requirements and tests; German version EN 12263:1998 |
| DIN EN 12284 | 制冷系統和熱泵.閥.要求、檢驗和標記 | Refrigerating systems and heat pumps - Valves - Requirements, testing and marking; German version EN 12284:2003 |
| DIN EN 12309-1 | 燃氣吸收式空調器和吸收式空調器以及/或額定熱輸入不超過70kW的熱泵裝置.第1部分:安全 | Gas-fired absorption and adsorption air-conditioning and/or heat pump appliances with a net heat input not exceeding 70 kW - Part 1: Safety; German version EN 12309-1:1999 |
| DIN EN 12309-2 | 燃氣吸收和吸附式空調器和/或凈熱輸入不超過70kW的熱力泵裝置.第2部分:能量的合理使用 | Gas-fired absorption and adsorption air-conditioning and/or heat pump appliances with a net heat input not exceeding 70 kW - Part 2: Rational use of energy; German version EN 12309-2:2000 |
| DIN EN 1232 | 工作場地大氣環境.化學物質手動取樣泵.要求和試驗方法 | Workplace atmospheres - Pumps for personal sampling of chemical agents - Requirements and test methods; German version EN 1232:1997 |
| DIN EN 12462 | 生物技術.泵的性能標準 | Biotechnology - Performance criteria for pumps; German version EN 12462:1998 |
| DIN EN 12483 | 液體泵.帶頻率變換器的泵組件.擔保和相容性試驗 | Liquid pumps - Pump units with frequency inverters - Guarantee and compatibility tests; German version EN 12483:1999 |
| DIN EN 12514-1 | 油燃燒器供油系統的安裝.第1部分:部件、供油泵、控制和安全裝置及供油罐的安全要求和試驗 | Installations for oil supply systems for oil burners - Part 1: Safety requirements and tests; parts, oil feed pumps, control and safety devices, supply tanks; German version EN 12514-1:2000 |
| DIN EN 12583 | 供氣系統.壓縮機泵站.功能要求 | Gas supply systems - Compressor stations - Functional requirements; German version EN 12583:2000 |
| DIN EN 12639 | 液體泵和泵部件.噪音試驗規程.精確性2級和3級 | Liquid pumps and pump units - Noise test code - Grade 2 and 3 of accuracy; German version EN 12639:2000 |
| DIN EN 12723 | 液體泵.泵和設備的通用術語.定義、參數、字母符號和單位 | Liquid pumps - General terms for pumps and installations - Definitions, quantities, letter symbols and units; German version EN 12723:2000 |
| DIN EN 12919 | 工作場所空氣.超過每分鐘5升容積流量的化學試劑抽樣用泵.要求與試驗方法 | Workplace atmospheres - Pumps for the sampling of chemical agents with a volume flow rate of over 5 l/min - Requirements and test methods; German version EN 12919:1999 |
| DIN EN 13136 | 制冷系統和熱泵.釋壓裝置和相關管道.計算方法 | Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation; German version EN 13136:2001 + A1:2005 |
| DIN EN 13275 | 低溫容器.低溫設備用泵 | Cryogenic vessels - Pumps for cryogenic service; German version EN 13275:2000 |
| DIN EN 13313 | 制冷系統和加熱泵.人員能力; 德文版本 EN 13313:2001 | Refrigerating systems and heat pumps - Competence of personnel; German version EN 13313:2001 |
| DIN EN 13617-1 Berichtigung 1 | 加油站.第1部分:計量泵、分配器和遙控泵送設備的建造和性能安全要求.對DIN EN 13617-1-2004的勘誤 | Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units; German version EN 13617-1:2004, Corrigenda to DIN EN 13617-1:2004-08; German version EN 13617-1:2004/AC:2006 |
| DIN EN 13617-1 | 加油站.第1部分:計量泵、分配器和遙控泵送設備的建造和性能的安全要求 | Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units; German version EN 13617-1:2004 |
| DIN EN 13617-2 | 加油站.第2部分:計量泵、分配器用安全斷路器建造和性能的安全要求 | Petrol filling stations - Part 2: Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers; German version EN 13617-2:2004 |
| DIN EN 13617-4 | 加油站.第4部分:計量泵和配油器用轉環的建造和性能的安全要求 | Petrol filling stations - Part 4: Safety requirements for construction and performance of swivels for use on metering pumps and dispensers; German version EN 13617-4:2004 |
| DIN EN 13951 | 液泵.安全要求.農產品設備.使用中衛生保證的設計原則 | Liquid pumps - Safety requirements - Agrifoodstuffs equipment; Design rules to ensure hygiene in use; German version allemande EN 13951:2003 |
| DIN EN 14275 | 車用燃料.汽油和柴油質量的評定.從零售點油泵和商業點燃料自動售貨機中取樣 | Automotive fuels - Assessment of petrol and diesel fuel quality - Sampling from retail site station pumps and commercial site fuel dispensers; German version EN 14275:2003 |
| DIN EN 14466 | 消防泵.便攜式消防泵.安全和性能要求、試驗 | Fire fighting pumps - Portable pumps - Safety and performance requirements, tests; German version EN 14466:2005 |
| DIN EN 14511-1 | 空間加熱和制冷用帶電驅動壓縮機的空調、液體冷卻包和熱泵.第1部分:術語和定義 | Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 1: Terms and definitions; German version EN 14511-1:2004 |
| DIN EN 14511-2 | 空間加熱和制冷用帶電驅動壓縮機的空調、液體冷卻包和熱泵.第2部分:試驗條件 | Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 2: Test conditions; German version EN 14511-2:2004 |
| DIN EN 14511-3 | 空間加熱和制冷用帶電驅動壓縮機的空調、液體冷卻包和熱泵.第3部分:試驗方法 | Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 3: Test methods; German version EN 14511-3:2004 |
| DIN EN 14511-4 | 空間加熱和制冷用帶電驅動壓縮機的空調、液體冷卻包和熱泵.第4部分:要求 | Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 4: Requirements; German version EN 14511-4:2004 |
| DIN EN 14662-1 | 環境空氣質量.苯濃度測量的標準方法.第1部分:熱解吸和氣相色譜法之后的泵送取樣 | Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography; German version EN 14662-1:2005 |
| DIN EN 14662-2 | 環境空氣質量.苯濃度測量的標準方法.第2部分:溶劑解吸和氣相色譜法之后的泵送取樣 | Ambient air quality - Standard method for measurement of benzene concentrations - Part 2: Pumped sampling followed by solvent desorption and gas chromatography; German version EN 14662-2:2005 |
| DIN EN 14662-3 | 環境空氣質量.苯濃度測量的標準方法.第3部分:用現場氣相色譜法的自動泵送取樣 | Ambient air quality - Standard method for measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography; German version EN 14662-3:2005 |
| DIN EN 14710-1 | 消防泵.無起動注油器的消防離心泵.第1部分:分類、一般要求和安全要求 | Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 1: Classification, general and safety requirements; German version EN 14710-1:2005 |
| DIN EN 14710-2 | 消防泵.無起動注油器的消防離心泵.第2部分:一般和安全要求的驗證 | Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 2: Verification of general and safety requirements; German version EN 14710-2:2005 |
| DIN EN 1736 | 制冷系統和熱泵.軟管元件、隔振器和膨脹節.要求、設計和安裝 | Refrigerating systems and heat pumps - Flexible pipe elements, vibration isolators and expansion joints - Requirements, design and installation; German version EN 1736:2000 |
| DIN EN 1861 | 制冷設備和熱泵.系統流程圖和管道流程及儀器流程圖.結構布局和符號 | Refrigerating systems and heat pumps - System flow diagrams and piping and instrument diagrams - Layout and symbols; German version EN 1861:1998 |
| DIN EN 1947 | 消防軟管.泵和水車用半剛性輸水軟管和軟管組合件; 德文版本 EN 1947:2002 | Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles; German version EN 1947:2002 |
| DIN EN 225 | 油霧化燃燒器.帶旋轉軸和外部驅動裝置的泵.尺寸 | Atomizing oil burners; pumps with rotating shaft and external drive; dimensions; german version EN 225:1987 |
| DIN EN 22858 | 端布抽吸式離心泵(額定壓力16巴).標示、額定功率和尺寸 | End-suction centrifugal pumps (rating 16 bar); designation, nominal duty point and dimensions (ISO 2858:1975); German version EN 22858:1993 |
| DIN EN 23661 | 離心式末端吸入泵.基座和安裝尺寸 (ISO 3661:1977); 德文版本 EN 23661:1993 | End-suction centrifugal pumps - Baseplate and installation dimensions (ISO 3661:1977); German version EN 23661:1993 |
| DIN EN 255-3 | 電驅動壓縮機的空調、液體致冷機組和熱泵.加熱方式.第3部分:衛生用熱水設備標志的檢驗和要求 | Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors - Heating mode - Part 3: Testing and requirements for marking for sanitary hot water units (includes corrigendum AC:1997); German version EN 255-3:1997 + AC:1997 |
| DIN EN 378-1 | 冷凍設備和熱力泵.安全性和環境要求.第1部分:基本要求、定義、分類和選擇標準 | Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteria; German version EN 378-1:2000 |
| DIN EN 378-2 | 冷藏系統和熱泵.安全和環境要求.第2部分:設計、制造、試驗、標記和文件 | Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation; German version EN 378-2:2000 |
| DIN EN 378-3 | 冷藏系統和熱泵.安全和環境要求.第3部分:安裝地點和人員保護 | Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site and personal protection; German version EN 378-3:2000 |
| DIN EN 378-4 | 冷藏系統和熱泵.安全和環境要求.第4部分:操作、維修、修理和回收 | Refrigerating systems and heat pumps - Safety and environmental requirements - Part 4: Operation, maintenance, repair and recovery; German version EN 378-4:2000 |
| DIN EN 45510-5-4 | 發電廠設備購置說明.第5-4部分:水輪機、蓄水儲能泵和泵渦輪機 | Guide for procurement of power station equipment - Part 5-4: Hydraulic turbines, storage-pumps and pump-turbines; German version EN 45510-5-4:1998 |
| DIN EN 45510-6-4 | 發電廠設備購置指南.第6-4部分:渦輪機輔助設備和泵 | Guide for procurement of power station equipment - Part 6-4: Turbine auxiliaries; pumps; German version EN 45510-6-4:1999 |
| DIN EN 50216-7 | 電力變壓器和電抗器配件.第7部分:變壓器油用電力泵; 德文版本 EN 50216-7:2002 | Power transformer and reactor fittings - Part 7: Electric pumps for transformer oil; German version EN 50216-7:2002 |
| DIN EN 60335-2-41 | 家用和類似用途電器的安全.第2-41部分:泵的特殊要求 | Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps (IEC 60335-2-41:2002 + A1:2004); German version EN 60335-2-41:2003 + A1:2004 |
| DIN EN 60335-2-51 | 家用和類似用途電器的安全.第2-51部分:加熱和供水設施用固定式循環泵的特殊要求 | Household and similar electrical appliances - Safety - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations (IEC 60335-2-51:2002); German version EN 60335-2-51:2003 |
| DIN EN 60601-2-24 | 醫療電氣設備.第2-24部分:注射泵和控制器安全性的特殊要求 | Medical electrical equipment - Part 2-24: Particular requirements for the safety of infusion pumps and controllers (IEC 60601-2-24:1998); German version EN 60601-2-24:1998 |
| DIN EN 61290-6-1 | 光纖放大器.基本規范.第6-1部分:泵漏泄參數的試驗方法.光信號多路分配器 | Optical fibre amplifiers - Basic specification - Part 6-1: Test methods for pump leakage parameters; optical demultiplexer (IEC 61290-6-1:1998); German version EN 61290-6-1:1998 |
| DIN EN 61702 | 直接耦合的光伏(PV)水泵系統的額定值 | Rating of direct coupled photovoltaic (PV) pumping systems (IEC 61702:1995); German version EN 61702:1999 |
| DIN EN 733 | 帶軸承座和PN10軸向端口的離心泵.額定功率.主要尺寸、標識系統; 德文版本 EN 733:1995 | End-suction centrifugal pumps, rating 10 bar with bearing bracket - Nominal duty point, main dimensions, designation system; German version EN 733:1995 |
| DIN EN 734 | 帶側通道泵PN40.額定功率、主要尺寸、命名制度 | Side channel pumps PN 40 - Nominal duty point, main dimensions, designation system; German version EN 734:1995 |
| DIN EN 735 | 旋轉動態泵的總體尺寸.公差 | Overall dimensions of rotodynamic pumps - Tolerances; German version EN 735:1995 |
| DIN EN 752-6 | 建筑物外部排水和污水系統.第6部分:泵設備 | Drain and sewer systems outside buildings - Part 6: Pumping installations; German version EN 752-6:1998 |
| DIN EN 809 | 液體泵和泵裝置.一般安全性要求 | Pumps and pump units for liquids - Common safety requirements; German version EN 809:1998 |
| DIN EN ISO 13709 | 石油、石油化工和天然氣工業用離心泵 | Centrifugal pumps for petroleum, petrochemical and natural gas industries (ISO 13709:2003); English version EN ISO 13709:2003 |
| DIN EN ISO 13710 | 石油、石油化學和天然氣工業.往復式變?nèi)菡婵毡? | Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps (ISO 13710:2004); English version EN ISO 13710:2004 |
| DIN EN ISO 14847 | 旋轉式正排量泵.技術要求 | Rotary positive displacement pumps - Technical requirements (ISO 14847:1999); German version EN ISO 14847:1999 |
| DIN EN ISO 15083 | 小艇.艙底泵吸系統 | Small craft - Bilge pumping systems (ISO 15083:2003); German version EN ISO 15083:2003 |
| DIN EN ISO 15136-1 | 石油工業和天然氣工業用鉆孔設備.人工升降機用行進式空腔泵系統.第1部分:泵 (ISO 15136-1:2001); 德文版本 | Downhole equipment for petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps (ISO 15136-1:2001); German version EN ISO 15136-1:2001 |
| DIN EN ISO 15783 | 無封裝旋翼動力泵.級別II.規范 | Seal-less rotodynamic pumps - Class II - Specification (ISO 15783:2002); German version EN ISO 15783:2003 |
| DIN EN ISO 16330 | 往復運動變?nèi)菡婵毡煤捅醚b置.技術要求 | Reciprocating positive displacement pumps and pump units - Technical requirements (ISO 16330:2003); German version EN ISO 16330:2003 |
| DIN EN ISO 20763 | 石油和相關產品.液壓液耐磨性能的測定.葉片泵法 | Petroleum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method (ISO 20763:2004); German version EN ISO 20763:2004 |
| DIN EN ISO 21049 | 泵.離心和旋轉泵用軸密封系統 | Pumps - Shaft sealing systems for centrifugal and rotary pumps (ISO 21049:2004); English version EN ISO 21049:2004 |
| DIN EN ISO 2151 | 聲學.壓縮機和真空泵用噪音試驗規程.工程法(2級) | Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (grade 2) (ISO 2151:2004); German version EN ISO 2151:2004 |
| DIN EN ISO 5198 | 離心泵、混流泵和軸流泵.液壓性能試驗規范.精密級 | Centrifugal, mixed flow and axial pumps - Code for hydraulic performance tests - Precision class (ISO 5198:1987); German version EN ISO 5198:1998 |
| DIN EN ISO 5199 | 離心泵的技術規范.II類 | Technical specifications for centrifugal pumps - Class II (ISO 5199:2002); German version EN ISO 5199:2002 |
| DIN EN ISO 7886-2 | 無菌皮下注一次性射器.第1部分:帶動力注射泵的注射器 | Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps (ISO 7886-2:1997); German version EN ISO 7886-2:1997 |
| DIN EN ISO 8849 | 小艇.電動直流艙底泵 | Small craft - Electrically operated direct-current bilge pumps (ISO 8849:2003); German version EN ISO 8849:2003 |
| DIN EN ISO 9906 | 旋轉式動力泵.液壓性能驗收試驗.等級1和2 (ISO 9906:1999); 德文版本 EN ISO 9906:1999 | Rotodynamic pumps - Hydraulic performance acceptance test - Grades 1 and 2 (ISO 9906:1999); German version EN ISO 9906:1999 |
| DIN ISO 3019-1 | 液壓傳動.容積泵和馬達的安裝法蘭和軸伸的尺寸及標注代號.第1部分:用米制單位表示的英制系列 | Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Part 1: Inch series shown in metric units (ISO 3019-1:2001) |
| DIN ISO 3019-2 | 液壓傳動.容積式泵和馬達的安裝法蘭和軸伸的尺寸及標注代號.第2部分:米制系列 | Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Part 2: Metric series (ISO 3019-2:2001) |
| DIN ISO 4391 | 液壓傳動.泵、電動機和整體式傳動裝置.參數定義和字母符號 | Hydraulic fluid power; pumps, motors and integral transmissions; parameter definitions and letter symbols |
| DIN ISO 4409 | 液壓里動力.正排量泵、電動機和整體傳動裝置.靜態穩定性的測定 | Hydraulic fluid power; positive displacement pumps, motors and integral transmissions; determination of steady-state performance; identical with ISO 4409:1986 |
| DIN ISO 6519 | 柴油機.噴油泵.軸端和轂環的錐度; 等同采用 ISO 6519:1993 | Diesel engines - Fuel injection pumps - Tapers for shaft ends and hubs; identical with ISO 6519:1993 |
| DIN ISO 7299 | 道路車輛.噴油泵端面法蘭 | Road vehicles; end-mounting flanges for fuel injection pumps; identical with ISO 7299, edition 1984 |
| DIN ISO 7612 | 柴油4機.柱塞式噴油泵.安裝尺寸 | Diesel engines - Base-mounted in-line fuel injection pumps - Mounting dimensions; identical with ISO 7612:1994 |
| DIN ISO 7876-1 | 燃油噴射系統.詞匯.第1部分：噴油泵 | Fuel injection equipment; vocabulary; part 1: fuel injection pumps; identical with ISO 7876-1:1990 |
| DIN ISO 7879 | 道路車輛.托架安裝的直列柱塞燃油噴射泵.安裝尺寸 | Road vehicles; cradle-mounted in-line fuel injection pumps; mounting dimensions; identical with ISO 7879:1990 |
| DIN ISO 7919-5 | 機械振動.通過旋轉軸上的測量評價機械振動.第5部分:水力發電廠和泵站機組 | Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 5: Machine sets in hydraulic power generating and pumping plants (ISO 7919-5:2005) |
| DIN ISO 8426 | 液壓流體動力.正排量泵和電動機.推導容積的測定 | Hydraulic fluid power; positive displacement pumps and motors; determination of derived capacity; identical with ISO 8426:1988 |
| DIN ISO 9534 | 道路車輛.燃油泵的電聯接 | Road vehicles; fuel pump electric connections; identical with ISO 9534:1989 |
| DIN ISO 9905 | I級離心泵的技術規范 | Technical specifications for centrifugal pumps - Class I (ISO/DIS 9905:1994) |
| DIN ISO 9908 | 離心泵.Ⅲ級離心泵的技術規范 | Centrifugal pumps - Technical specifications for centrifugal pumps; class III (ISO 9908:1993) |
| DIN V 4759-2 | 不同能源用采暖設備.第2部分:二價采暖設備的熱力泵包括電動壓縮機的使用 | Heating installations for different sources of energy; use of heat pumps including electrically operated compressors in bivalent heating installations |
| DIN V ENV 12102 | 空調器、熱力泵和帶電動壓縮機的除濕器.載氣噪聲測量.聲功率級測定 | Air conditioners, heat pumps and dehumidifiers with electrically driven compressors - Measurement of airborne noise - Determination of the sound power level; German version ENV 12102:1996 |
| 編號 | 中文名稱 | 英文名稱 |