微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ANSI C12.7 | 電度表插座要求 | Requirements for Watthour Meter Sockets |
| ANSI C136.10 | 道路和地區照明設備.鎖定式光控裝置和配套的插座.物理和電氣互換性及測試 | Roadway and Area Lighting Equipment - Locking-type Photocontrol Devices and Mating Receptacles - Physical and Electrical Interchangeability and Testing |
| ANSI C136.4 | 道路照明設備.系列插座和系列插座插孔 | Roadway Lighting Equipment - Series Sockets and Series-Socket Receptacles |
| ANSI PH3.107 | 攝影(照相機).快門線頂尖和插座.尺寸 | Photography (Cameras) - Shutter Cable Release and Socket - Dimensions |
| ANSI/AMCA 99-2412 | 離心式風扇用葉輪直徑和插座區 | Impeller Diameters and Outlet Areas for Centrifugal Fans |
| ANSI/EIA 364-87 | 電氣連接件,接觸件和插座的毫微秒事件檢測 | Nanosecond Event Detection for Electrical Connectors, Contacts and Sockets |
| ANSI/EIA 540AA00 | 電子設備用無引線A、B、D型片載體用片載插座的空白詳細規范 | Chip Carrier Sockets for Leadless type A,B,D Chip Carriers for use in Electronic Equipment, Blank Detail Specification for |
| ANSI/EIA 540AB00 | 電子設備用塑料方形扁平組件的片載插座的空白詳細規范 | Chip Carrier Sockets for Plastic Quad Flat Packages for Use in Electronic Equipment, Blank Detail Specification for |
| ANSI/EIA 540AC00 | 電子設備用"J"型引線塑料片載體(PCC)組件的片載插座的空白詳細規范 | Chip Carrier Sockets for Plastic Chip Carrier (PCC) Packages with J Type Leads for Use in Electronic Equipment, Blank Detail Specification for |
| ANSI/EIA 540AD00 | 電子設備用針式格子排列插座的適配器載體方形扁平外殼的詳細規范 | Adapter-Carrier Quad Flat Pack to Pin Grid Array Sockets for Use in Electronic Equipment, Blank Detail Specification for |
| ANSI/EIA 540B0AA | 用于電子設備有1.27mm間距的BGA插座的詳細規范 | Detail Specification for Production Ball Grid Array (BGA) Sockets with 1.27 mm (0.050 in) Spacing for Use in Electronic Equipment |
| ANSI/EIA 540DB00 | 退耦合電容器雙排標準組合插件插座的空白詳細規范 | Blank Detail Specification for Decoupling Capacitor Dual-in-Line Package Sockets |
| ANSI/EIA 540F000 | 電子設備用多組組合插座的分規范 | Multi-Package Module Sockets for Use in Electronic Equipment, Sectional Specification for |
| ANSI/EIA-364-01B | 電連接器和插座用加速度試驗程序 | Acceleration Test Procedure for Electrical Connectors and Sockets |
| ANSI/EIA-364-1000.01A | 評定商務辦公設備用電器連接件和插座性能的環境試驗方法 | Environmental Test Methodology for Assessing the Performance of Electrical Connectors and Sockets Used in Business Office Applications |
| ANSI/EIA-364-101 | 電連接器、插座、電纜附件或互連系統衰減試驗程序 | Attenuation Test Procedure for Electrical Connectors, Sockets and Cable Assemblies or Interconnection Systems |
| ANSI/EIA-364-102 | 電連接器、插座、電纜附件或互連系統上升時間降低試驗程序 | Rise Time Degradation Test Procedure for Electrical Connectors, Sockets, Cable Assemblies or Interconnection Systems |
| ANSI/EIA-364-103 | 電連接器、插座、電纜附件或互連系統傳播延遲試驗程序 | Propogation Delay Test Procedure for Electrical Connectors, Sockets, Cable Assemblies or Interconnection Systems |
| ANSI/EIA-364-106 | 電連接器和插座的駐波比(SWR)試驗程序 | Standing Wave Ratio (SWR) Test Procedure for Electrical Connectors and Sockets |
| ANSI/EIA-364-107 | 電連接器、插座、電纜組件或互連系統的眼孔圖樣和不穩定性試驗程序 | Eye Pattern and Jitter Test Procedure for Electrical Connectors, Sockets, Cable Assemblies or Interconnection Systems |
| ANSI/EIA-364-11B | 電連接器和插座的耐溶劑性試驗程序 | Resistance to Solvents Test Procedure for Electrical Connectors and Sockets |
| ANSI/EIA-364-12A | 電連接器和插座的束口試驗程序 | Restricted Entry Test Procedure for Electrical Connectors and Sockets |
| ANSI/EIA-364-13D | 電連接器和插座間插拔力的試驗程序 | Mating and Unmating Force Test Procedure for Electrical Connectors and Sockets |
| ANSI/EIA-364-21C | 電連接器、插座和同軸觸點的絕緣電阻試驗程序 | Insulation Resistance Test Procedure for Electrical Connectors, sockets and Coaxial Contacts |
| ANSI/EIA-364-23C | 電連接器和插座的低層接觸電阻試驗程序 | Low Level Contact Resistance Test Procedure for Electrical Connectors and Sockets |
| ANSI/EIA-364-30A | 電連接器和插座的電容試驗程序 | Capacitance Test Procedure for Electrical Connectors and Sockets |
| ANSI/EIA-364-52A | 連接器/插座中使用的觸點終端的軟釬焊性的TP52試驗程序 | TP 52 Test Procedures for Solderability of Contact Terminations Use in Connectors/Sockets |
| ANSI/EIA-364-56C | 電連接器和插座的耐焊接性加熱試驗過程 | Resistance to Soldering Heat Test Procedure for Electrical Connectors and Sockets |
| ANSI/EIA-364-62A | 電子連接器和插座的終端強度試驗規程TP-62A | TP-62A, Terminal Strength Test Procedure for Electrical Connectors and Sockets |
| ANSI/EIA-364-70B | 電連接器和插座的與電流相對應的溫升試驗程序 | Temperature Rise Versus Current Test Procedure for Electrical Connectors and Sockets |
| ANSI/EIA-364-80 | 電連接器和插座的低頻屏蔽效果試驗程序 | Low Frequency Shielding Effectiveness Test Procedure for Electrical Connectors and Sockers |
| ANSI/EIA-364-81A | 電連接器套、連接器組件和插座的燃燒特性試驗程序 | Combustion Characteristics Test Procedure for Electrical Connector Housing, Connector Assemblies and Sockets |
| ANSI/EIA-364-82A | 電連接器套、連接器組件和插座的塑料腐蝕性試驗程序 | Corrosivity of Plastics Test Procedure for Electrical Connector Housing, Connector and Socket Housings |
| ANSI/EIA-364-87 | 電連接器、觸點和插座的納秒事件探測 | Nanosecond Event Detection for Electrical Connectors, Contacts and Sockets |
| ANSI/EIA-364-89A | 航天用電連接器和插座的試驗程序 | Space Application Test Procedures for Electrical Connectors, and sockets |
| ANSI/EIA-364-90 | 電連接器、插座、電纜組件或互聯系統用串?dāng)_比試驗程序 | Crosstalk Ratio Test Procedure for Electrical Connectors, Sockets, Cable Assemblies or Interconnect Systems |
| ANSI/EIA-364-91A | 電連接器和插座的粉塵試驗 | Dust Test for Electrical Connectors and Sockets |
| ANSI/EIA-540A000-A | 電子設備用芯片載體插座分規范 | Sectional Specification for Sockets for Chip Carriers for Use in Electronic Equipment |
| ANSI/EIA-540AA00 | 電子設備用無引線A、B和D型片式載體用片式載體插座的空白詳細規范 | Chip Carrier Sockets for Leadless type A,B,D Chip Carriers for use in Electronic Equipment, Blank Detail Specification for |
| ANSI/EIA-540AAAA | 電子設備用A型1.27mm(.050")間隔的無引線芯片載體用片式載體插座 | Chip Carrier Sockets for Leadless Type A 1.27 mm (.050") Spacing Chip Carriers for Use in Electronic Equipment |
| ANSI/EIA-540AB00 | 電子設備用塑料方形扁平封裝用片式載體插座的空白詳細規范 | Chip Carrier Sockets for Plastic Quad Flat Packages for Use in Electronic Equipment, Blank Detail Specification for |
| ANSI/EIA-540ABAA | 塑料方形扁平封裝0.635mm(0.25英寸)引線間隔的芯片載體插座的詳細規范 | Detail Specification for Chip Carrier Sockets for Plastic Quad Flat Pack 0.635-mm (0.25-in) Lead Spacing (Gullwing) |
| ANSI/EIA-540AC00 | 電子設備用J型引線塑料片式載體(PCC)封裝的片式載體插座的空白詳細規范 | Chip Carrier Sockets for Plastic Chip Carrier (PCC) Packages with J Type Leads for Use in Electronic Equipment, Blank Detail Specification for |
| ANSI/EIA-540ACAA | 1.27mm(0.50英寸)引線間隔的塑料片式載體系列用片式載體插座的詳細規范 | Chip Carrier Sockets for Plastic Chip Carrier Family 1.27 mm (0.50 inch) Lead Spacing, Detail Specification for |
| ANSI/EIA-540AD00 | 電子設備用插針格柵陣列插座的載體方形扁平組件的適配器用空白詳細規范 | Adapter-Carrier Quad Flat Pack to Pin Grid Array Sockets for Use in Electronic Equipment, Blank Detail Specification for |
| ANSI/EIA-540ADAA | 電子設備用插針格柵陣列插座的載體方形扁平組件的適配器用詳細規范 | Adaptor-Carrier Quad Flat Pack to Pin Grid Array Sockets for Use in Electronic Equipment, Detail Specification for |
| ANSI/EIA-540B000 | 電子設備用間隔為2.54 mm × 2.54 mm (0.1" × 0.1")的引線格柵陣列(PGA)器件插座的分規范 | Sectional Specification for Sockets for Pin-Grid Array Devices with 2.54 mm × 2.54 mm (0.1" × 0.1") Spacing for Use in Electronic Equipment |
| ANSI/EIA-540B0AA | 電子設備用間隔為1.27 mm (0.050英寸)的球形格柵陣列(BGA)插座生產的詳細規范 | Detail Specification for Production Ball Grid Array (BGA) Sockets with 1.27 mm (0.050 in) Spacing for Use in Electronic Equipment |
| ANSI/EIA-540B0AE | 電子設備用間隔為1.27 mm (0.050 in)的接觸面格柵陣列(LGA)插座生產的詳細規范 | Detail Specification for Production Land Grid Array (LGA) Socket with 1.27 mm (0.050 in) Spacing for Use in Electronic Equipment |
| ANSI/EIA-540BA00 | 電子設備用間隔為2.54 mm× 2.54 mm (0.1" × 0.1")的引線格柵陣列(PGA)器件插座的空白詳細規范 | Blank Detail Specification: Sockets for Pin Grid Array Devices with 2.54 mm × 2.54 mm (0.1" × 0.1") Spacing for Use in Electronic Equipment |
| ANSI/EIA-540BAAB | 電子設備用間隔為2.54 mm× 2.54 mm (0.1" × 0.1")的引線格柵陣列(PGA)器件用非機械操作插座 | Non-Mechanically Activated Sockets for Pin Grid Array Devices with 2.54 mm × 2.54 mm (0.1" × 0.1") Spacing for Use in Electronic Equipment |
| ANSI/EIA-540BAAC | 電子設備用引線格柵陣列(PGA)器件的非機械操作柔性載體插座詳細規范 | Nonmechanically Actuated Flexible Carrier Sockets for Pin Grid Array for Use in Electronic Equipment, Detail Specification for |
| ANSI/EIA-540C000 | 電子設備用繼電器插座的分規范 | Sectional Specification for Sockets for Relays for Use in Electronic Equipment |
| ANSI/EIA-540CA00 | 繼電器插座的空白詳細規范 | Blank Detail Specification on Relay Sockets |
| ANSI/EIA-540CAAA | 繼電器插座的詳細規范.平衡銜鐵繼電器用10A插座 | Detail Specification on Relay Sockets - 10A for Balanced Armature Relay |
| ANSI/EIA-540CAAB | 繼電器插座的詳細規范.平衡銜鐵繼電器用5A插座 | Detail Specification for Relay Sockets - 5A for Balanced Armature Relay |
| ANSI/EIA-540CAAC | 雙極10A繼電器插座的詳細規范 | Detail Specification for 2-Pole 10A Relay Sockets |
| ANSI/EIA-540CAAD-A | 雙極5A繼電器插座的詳細規范 | Detail Specification for 2-Pole, 5A Relay Sockets |
| ANSI/EIA-540CAAE-A | 三極10A繼電器插座的詳細規范 | Detail Specification for 3-Pole 10A Relay Sockets |
| ANSI/EIA-540D000A | 電子設備用直插封裝插座的分規范 | In-Line Package Sockets for Use in Electronic Equipment, Sectional Specification for |
| ANSI/EIA-540DA00 | 電子設備用雙列直插封裝式插座的空白詳細規范 | Dual-In-Line Package Sockets for Use in Electronic Equipment, Blank Detail Specification for |
| ANSI/EIA-540DAAB | 電子設備用雙片雙列柔性載體插座的詳細規范 | Detail Specification for Flexible Carrier 2-Piece Dual-In-Line Socket for Use in Electronic Equipment |
| ANSI/EIA-540DB00 | 去耦電容器雙列直插封裝式插座的空白詳細規范 | Blank Detail Specification for Decoupling Capacitor Dual-in-Line Package Sockets |
| ANSI/EIA-540DBAA | 電子設備用去耦電容器雙列直插封裝式插座的詳細規范 | Detail Specification for Decoupling Capacitor Dual-In-Line Package Sockets for Use in Electronic Equipment |
| ANSI/EIA-540E000 | 圓形插座分規范 | Sectional Specification for Round Style Sockets |
| ANSI/EIA-540EA00 | 圓形插座空白詳細規范 | Blank Detail Specification for Round Style Sockets |
| ANSI/EIA-540EAAA | 圓形插座詳細規范 | Detail Specification for Round Style Sockets |
| ANSI/EIA-540F000 | 電子設備用多插件模塊插座的分規范 | Multi-Package Module Sockets for Use in Electronic Equipment, Sectional Specification for |
| ANSI/EIA-540FAAA | 電子設備用100Mil間距多插件、垂直安裝的格式模塊插座的詳細規范 | Detail Specification for Multi-Package 100 Mil Pitch, Vertical Mounting Format Module Sockets for Use in Electronic Equipment |
| ANSI/EIA-540FAAB | 電子設備用100Mil間距多插件、定角安裝的格式模塊插座的詳細規范 | Detail Specification for Multi-Package 100 Mil Pitch, Angled Mounting Format Module Sockets for Use in Electronic Equipment |
| ANSI/EIA-540FAAC | 電子設備用50Mil間距多插件、垂直安裝的格式模塊插座的詳細規范 | Detail Specification for Multi-Package 50 Mil Pitch, Vertical Mounting Format Module Sockets for Use in Electronic Equipment |
| ANSI/EIA-540FAAD | 電子設備用50Mil間距多插件、定角安裝的格式模塊插座的詳細規范 | Detail Specification for Multi-Package 50 Mil Pitch, Angled Mounting Format Module Sockets for Use in Electronic Equipment |
| ANSI/EIA-540G000 | 電子設備用燒進插座的分規范 | Sectional Specification for Burn-In Sockets for Use in Electronic Equipment |
| ANSI/EIA-540GA00 | 電子設備用帶模壓載體環的片式載體封裝燒進插座的空白詳細規范 | Blank Detail Specification for Burn-In Socket for Chip Carrier Packages with Molded Carrier Rings for Use in Electronic Equipment |
| ANSI/EIA-540GAAA | 電子設備用帶模壓載體環的片式載體封裝燒進插座的詳細規范 | Detail Specification for Burn-In Sockets for Chip Carrier Packages with Molded Carrier Rings for Use with Electronic Equipment |
| ANSI/EIA-540H000 | 電子設備用球形格柵陣列(BGA)器件燒結插座的分規范 | Sectional Specification for Burn-In Sockets Used with Ball Grid Array Devices for Use in Electronic Equipment |
| ANSI/EIA-540HA00 | 電子設備用球形格柵陣列(BGA)器件燒接插座的空白詳細規范 | Blank Detail Specification for Burn-In Sockets Used with Ball Grid Array Devices for Use in Electronic Equipment |
| ANSI/EIA-540HAAA | 電子設備用球形格柵陣列(BGA)器件燒進插座的詳細規范 | Detail Specification for Burn-In Sockets Used with Ball Grid Array Devices for Use in Electronic Equipment |
| ANSI/EIA/CEA 364-28E | 電連接器和插座的振動試驗程序 | Vibration Test Procedure for Electrical Connectors and Sockets |
| ANSI/EIA/CEA 364-59A | 電子連接器和插座的低溫試驗程序 | Low Temperature Test Procedure for Electrical Connectors and Sockets |
| ANSI/EIA/ECA 364-18B | 電連接和插座用視覺和空間檢驗試驗規程 | Visual and Dimensional Inspection Test Procedure for Electrical Connectors and Sockets |
| ANSI/NEMA FB-11 | 危險位置用插針和套管式的插頭、插座和連接器 | Plugs, Receptacles, and Connectors of the Pin and Sleeve Type for Hazardous Locations |
| ANSI/SCTE 01 | "F"端口(室外用插座)物理尺寸 | "F" Port (Female Outdoor) Physical Dimensions |
| ANSI/STCE SP406 | "F"入口(室內插座)物理尺寸 | "F" Port (Female Indoor) Physical Dimensions |
| ANSI/UL 414 | 儀表插座的安全標準 | Standard for Safety for Meter Sockets |
| ANSI/UL 498 | 連接插頭和插座安全性的標準 | Standard for Safety for Attachment Plugs and Receptacles (Proposal dated April 6, 2007) |
| ANSI/UL 498A | 分插座和轉接器的安全標準 | Standard for Safety for Current Taps and Adapters |
| IEEE C 12.7 | 電度表插座技術要求 | (Requirements for watthour meter sockets) |
| IEEE C 12.8 | 自含A底插座電度表安裝用測試塊和測試盒 | (Test blocks and cabinets for installation of self-containded A-base watthour meters) |
| IEEE C 136.10 | 道路照明設備.鎖緊式光控制設備和配套插座結構和電氣互換性及檢驗 | (Roadway lighting equipment - Locking-type photocontrol devices and mating receptacle physical and electrical interchangeability and testing) |
| IEEE C 136.11 | 道路照明設備.并聯插座 | (Roadway Lighting Equipment - Multiple Sockets) |
| IEEE C 136.4 | 道路照明設備.串聯插座和串聯插座頭 | (Roadway Lighting Equipment - Series Sockets and Series-Socket Receptacles) |
| IEEE C 136.4/ANSI C 136.4 | 道路照明設備系列插座和系列插座孔 | (Roadway Lighting Equipment - Series Sockets and Series-Socket Receptacles) |
| UL 1010 | 危險(分類的)場所用插座插頭組合件 | (Receptacle-plug combinations for use in hazardous (classified) locations ) |
| UL 1567 | 鋁線用插座和開關 | (Receptacles and switches intended for use with aluminium wire ) |
| UL 231 | 電源插座 | (Power outlets ) |
| UL 498 | 連接插頭和插座 | (Attachment plugs and receptacles ) |
| UL 879 | 氣體放電信號管用電極插座 | (Electrode receptacles for gas-tube signs ) |
| 編號 | 中文名稱 | 英文名稱 |