微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| DIN 14690-1 | 消防設備.16A、42V雙極插座連接器.連接器插座 | Fire fighting equipment; two-pole connector, 16 A, 42 V, socket, connector socket |
| DIN 15563-3 | 電影和電視攝影棚專用插座.第3部分:交流 400/230 V、315 A 無保護線的單極專用插頭 | Special female sockets for connecting cables and switchboards for motion-picture and television studio use; part 3: single pole special female sockets without protective conductor, 400/230 V 315 A |
| DIN 15563-4 | 電影和電視播映室用連接電纜和開關裝置的專用插座.保護導線用單極專用插座 | Special female sockets for connecting cables and switchboards for motion-picture and television studio use; single pole special socket for protective conductor |
| DIN 18719 | 測量儀器.支柱和插座對中心 | Surveying instruments; centering, stub and socket |
| DIN 19001 | 照相機附件插座板.連接尺寸 | Camera accessory shoes; connecting dimensions |
| DIN 19003-1 | 閃光燈用連接器.連接電纜、插頭、插座、連接尺寸、要求 | Flash connector; connecting cable, plug, socket, connecting dimensions, requirements |
| DIN 19262 | pH電極用屏蔽插座和插頭 | Plug socket and plug shielded for pH electrodes |
| DIN 29736-2 | 航空航天.燃料噴嘴接地插頭和插座.技術規范 | Aerospace; fuel nozzle grounding plugs and sockets; technical specification |
| DIN 4000-14 | 電纜插座、插頭和電纜連接的產品特性圖表 | Tabular layouts of article characteristics for cable sockets, plugs and cable splices |
| DIN 41620-1 | 印制電路板(單列扁平觸點)用連接器:第1部分:棱邊插座連接器-棱邊印制板電路板 | Connectors for printed boards (flat contacts, single row); edge socket connectors-edge board contacts |
| DIN 42028-1 | 小型電動機用帶插座和連接片的連接器.型式和尺寸 | Connectors with receptacles and tabs for small motors; forms and dimensions |
| DIN 43590-3 | 鉛酸蓄電池.內燃機起動用整體蓄電池.接線端子和電纜插座 | Lead-acid batteries; monobloc-batteries for starting internal; combustion engines; connection terminal and cable socket |
| DIN 46244 | 插座插孔 | Tabs for receptacles |
| DIN 46245-1 | 插頭寬度為２·８的帶絕緣套的插座 | Receptacles for tab size 2,8, with insulating sleeve |
| DIN 46245-2 | 第1部分:插頭尺寸為 4.8 的絕緣套管插座 | Receptacles for tabs size 4,8, with insulating sleeve |
| DIN 46245-3 | 第3部分:插頭尺寸為 6.3 的絕緣套管插座 | Receptacles for tabs size 6,3, with insulating sleeve |
| DIN 46247-1 | 第1部分:插頭尺寸為 2.8 的無絕緣套管插座 | Receptacles for tabs size 2,8, without insulating sleeve |
| DIN 46247-2 | 第2部分:插頭尺寸為 6.3 的無絕緣套管插座 | Receptacles for tabs size 4,8, without insulating sleeve |
| DIN 46247-3 | 第3部分:插頭寬度為 6.3 的無絕緣套的插座 | Receptacles for tabs size 6,3, without insulating sleeve |
| DIN 46247-4 | 第4部分:插頭寬度為 9.5 的無絕緣套的插座 | Receptacles for tabs size 9,5, without insulating sleeve |
| DIN 46257 | 通信軟線用連接套管插座 | Sockets, connecting sleeve for telecommunication cords |
| DIN 46268-1 | 圓形連接器.3.5mm快速插入插針用快速插入插座 | Circular connectors; snap-in receptacle for 3,5 mm snap-in pin |
| DIN 46268-2 | 圓形連接器.3.5mm快速插入插座用快速插入插針 | Circular connectors; snap-in pin for 3,5 mm snap-in receptacles |
| DIN 46284 | 交流380V直流440V.2.5mm2平方以下導線的二極和三極插座式端子板(儀器端子) | Two- and three-pole socket terminal strips (appliance terminals) 380 V a.c. and 440 V d.c. for conductors up to 2,5 mm<(hoch)2> |
| DIN 46285 | 交流380V直流440V.2.5MM2平方以下導線的一極至三極插座式端子板（燈具端子） | One to three-pole socket terminal strips (lighting fixture terminals) 380 V a.c. and 440 V d.c. for conductors up to 2,5 mm<(hoch)2> |
| DIN 46330-1 | 調整片規格２·４的無絕緣套管的短插座 | Short receptacles without insulating sleeve, for tab size 2,4 |
| DIN 46330-2 | 接頭規格為２·８的無絕緣套的短插座 | Short receptacles; without insulating sleeve, for tab size 2,8 |
| DIN 46339 | 接線板上試驗用帶彈性銷的連接器.插頭和插座的主要尺寸 | Connectors with resilient pin for testing purposes on terminal blocks; main dimensions for plug and socket |
| DIN 46340-1 | 接頭規格為２·８的快速插入插座 | Snap-in receptacles for tab size 2,8 |
| DIN 46340-3 | 接頭規格為6·３的快速插入插座 | Snap-in receptacles for tab size 6,3 |
| DIN 46340-4 | 接頭規格為９·５的快速插入插座 | Snap-in receptacles for tab size 9,5 |
| DIN 46340-5 | 接頭規格為７·7的快速插入插座 | Snap-in receptacles for tab size 7,7 |
| DIN 46342-1 | 第1部分:插座用直形和角形插頭 | Tabs, straight and angled, for receptacles |
| DIN 46343-1 | 規格為２·８的插座用快速插入扁插頭 | Snap-in tabs for receptacle size 2,8 |
| DIN 46343-2 | 規格為4·８的插座用快速插入扁插頭 | Snap-in tabs for receptacle size 4,8 |
| DIN 46343-3 | 規格為6.3的插座用快速插入扁插頭 | Snap-in tabs for receptacle size 6,3 |
| DIN 46343-4 | 規格為9.5的插座用快速插入扁插頭 | Snap-in tabs for receptacle size 9,5 |
| DIN 46345 | 規格為６·３的帶插座 | Receptacles with tab for size 6,3 |
| DIN 46346 | 規格為６·３連接片的旗形插座 | Flag receptables for tab size 6,3 |
| DIN 48067-1 | 架空線路未安裝角形避雷器的插座孔 | Socket eyes without arc horn fixing for overhead lines |
| DIN 48067-2 | 架空線路安裝角形避雷器的插座孔 | Socket eyes with arc horn fixing for overhead lines |
| DIN 49073 | 符合DIN 49445、DIN 49447 和DIN EN 60309-2 (VDE 0623-20)要求金屬制儀表盒、16A250V以下裝修輔助儀器用沉 | Metal boxes and boxes of insulating material for recessed mounting for accomodation of accessories up to 16 A 250 V and socket-outlets according to DIN 49445, DIN 49447 and DIN EN 60309-2 (VDE 0623-20) up to 32 A 690 V - Main dimensions |
| DIN 49075-1 | 安裝在帶 φ45 mm 孔徑和規定插入件的安裝盒開關裝置、電氣插座及其附件用蓋板.第1部分:主要尺寸 | Cover plates for use with switches, socket-outlets and other accessories intended to be mounted into mounting boxes with openings having a diameter of 45 mm and with specified inserts; main dimensions |
| DIN 49075-2 | 安裝在不同于 φ45 mm 孔徑的不帶規定插入件的安裝盒開關裝置、電氣插座及其附件用蓋板.第2部分:主要尺寸 | Cover plates for use with switches, socket-outlets and other accessories intended to be mounted into mounting boxes with openings other than of diameter 45 mm without inserts; main dimensions |
| DIN 49076 | 與轉換開關、插座出口接線和準備安裝到安裝盒里的其它附件配用的導管和線槽的前面蓋的開口.主要尺寸 | Openings in front covers of ducting and trunking for use with switches, socket-outlets and other accessories to be mounted into mounting boxes; main dimensions |
| DIN 49100 | 帶直流10A.250V、交流16A250V接地觸點和16A 250V 以下轉換開關的兩極插座引線的基座.安裝尺寸 | Base for two-pole socket-outlets with earthing contacts 10 A 250 V d.c., 16 A 250 V a.c. and switches up to 16 A 250 V; mounting dimensions |
| DIN 49400 | 電器安裝材料.家用和工業用電氣插塞和插座引出線.概述 | Electrical installation material - Plugs and socket-outlets for household and industrial use - Synopsis |
| DIN 49437 | 帶有兩個250V.2.5A插座接口的轉接器 | Adapter with two socket-outlets 2,5 A 250 V |
| DIN 49440-1 | 交流16A250V帶接地接點的二極插座.第1部分:主要尺寸 | Two-pole socket-outlets with earthing contact, 16 A 250 V a.c. - Part 1: Main dimensions |
| DIN 49440-2 | 交流16A250V帶接地接點的二極插座.第2部分:可移動多槽插座.16A250V插座和2.5A250V插座混合插座.主要尺寸 | Two-pole socket-outlets with earthing contact, 16 A 250 V a.c. - Part 2: Mobile multiple socket-outlets; combination of socket-outlets, 16 A 250 V and socket-outlets 2,5 A 250 V - Main dimensions |
| DIN 49440-3 | 額定功率為直流10A.250V和交流16A.250V、帶接地接觸點的二極插座.防濺型輕便二極插座 | Two-pole socket-outlets with earthing contact rated for 10 A 250 V d.c., 16 A 250 V a.c., portable splash-proof socket-outlets |
| DIN 49440-4 | 額定接地功率為直流10A.250V和交流16A.250V的二極插座.輕便式插座用量規 | Two-pole socket-outlets with earthing rated for 10 A 250 V d.c., 16 A 250 V a.c.; gauges for portable socket-outlets |
| DIN 49440-5 | 帶保護觸點直流10A.250V和交流16A.250V盒裝二極插座.尺寸 | Two-pole socket-outlets with earthing contact; 10 A 250 V d.c., 16 A 250 V a.c., for mounting in boxes; dimensions |
| DIN 49440-6 | 帶保護觸點直流10A.250V和交流16A.250V的表面安裝和便攜式二極插座.尺寸 | Two-pole socket-outlets with earthing contact; 10 A 250 V d.c., 16 A 250 V a.c., for surface mounting and as portable type; dimensions |
| DIN 49442 | 交直流２５０Ｖ.１０Ａ和直流２５０Ｖ.１０Ａ交流２５０Ｖ.１６Ａ帶接地觸點的輸出裝置的防水兩極插座.主要 | Two-pole watertight socket-outlets with earthing-contact, 10 A, 250 V and 10 A, 250 V, 16 A, 250 V; principal dimensions |
| DIN 49445 | 帶N 觸點和接地觸點的16A 400/230V交流三極插座.主要尺寸 | Three-pole socket-outlets with N- and earthing contacts 16 A 400/230 V a.c.; principal dimensions |
| DIN 49447 | 帶N 觸點和接地觸點的25A 400/230V交流三極插座.主要尺寸 | Three-pole socket-outlets with N- and earthing contacts 25 A 400/230 V a.c.; principal dimensions |
| DIN 56903 | 劇院技術.舞臺照明.交流２５０Ｖ１０Ａ帶保護觸點的兩極專用插座 | Theatre technique, stage lighting; two pole special female plug with protective contact, 10 A, 250 V |
| DIN 56923 | 舞臺工程.舞臺設備.插座鉸鏈 | Stage engineering, stage equipment; socket hinges |
| DIN 65369 | 航空航天.25安培的5極和11極插座 | Aerospace; sockets, five- and eleven-pole 25 Amp |
| DIN 65370 | 航空航天.5安培的8和14極插座 | Aerospace; sockets, eight- and fourteen-pole 5 Amp |
| DIN 65371 | 航空航天.10A.5極和11極的插座 | Aerospace; sockets, five- and eleven-pole, 10 Amp |
| DIN 89262 | 帶保護觸點的兩極插座.直流10A、交流16A、交直流25V,保護類型IP56 | Double-pole sockets with earthing contact - DC 10 A, AC 16 A, AC/DC 250 V, degree of protection IP 56 |
| DIN 89263 | 交流250V、10A帶開關和帶保護觸點的兩極插座.保護類型IP 56 | Double-pole sockets with switch and earthing contact, AC/DC 10 A, AC/DC 250 V, degree of protection IP 56 |
| DIN 89320 | 直流10A,交流16A,250V帶接地觸點的防水插頭插座裝置的雙極觸點插入件 | Double-pole contact inserts for watertight plug- and socket devices with earthing contact, 10 A d.c., 16 A a.c., 250 V |
| DIN EN 147000 | 總規范.配合繼電器使用的經質量鑒定的插座 | Generic specification; sockets for use with electrical relays of assessed quality; German version EN 147000:1993 |
| DIN EN 147100 | 分規范.經質量鑒定的繼電器插座 | Sectional specification; relais sockets of assessed quality; German version EN 147100:1993 |
| DIN EN 147101 | 空白詳細規范.經質量鑒定的繼電器插座 | Blank detail specification; relais sockets of assessed quality; German version EN 147101:1994 |
| DIN EN 15207 | 危險物品運輸罐.危險區域中用帶24V標稱電源電壓設備用插頭/插座連接和電源特性 | Tanks for transport of dangerous goods - Plug/socket connection and supply characteristics for service equipment in hazardous areas with 24 V nominal supply voltage; English version of DIN EN 15207:2007-03 |
| DIN EN 2997-11 | 航空航天系列.使用溫度為175℃、連續使用溫度為200℃和最高溫度為260℃的耐火或不耐火的帶螺紋環連結的圓形 | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 °C continuous, 200 °C continuous, 260 °C peak - Part 11: Dummy receptacle; product standard; German version EN 2997-11:1997 |
| DIN EN 3155-003 | 航空航天系列.連接部件中用電連接器.第003部分: S級、壓緊、A型電連接器插座.產品標準 | Aerospace series - Electrical contacts used in elements of connection - Part 003: Contacts, electrical, female, type A, crimp, class S - Product standard; German and English version EN 3155-003:2005 |
| DIN EN 3155-005 Berichtigung 1 | 航空航天系列.連接部件中用電連接器.第005部分:T級、壓緊、A型電連接器插座.產品標準 | Aerospace series - Electrical contacts used in elements of connection - Part 005: Contacts, electrical, female, type A, crimp, class T - Product standard; German and English version EN 3155-005:2006, Corrigenda to DIN EN 3155-005:2006-10; German and English version EN 3155-005:2006/AC:2006 |
| DIN EN 3155-005 | 航空航天系列.連接部件中用電連接器.第005部分:T級、壓緊、A型電連接器插座.產品標準 | Aerospace series - Electrical contacts used in elements of connection - Part 005: Contacts, electrical, female, type A, crimp, class T - Product standard; German and English version EN 3155-005:2006 |
| DIN EN 3155-019 | 航空航天系列.連接部件中用電連接器.第019部分: S級、壓緊、A型電連接器插座.產品標準 | Aerospace series - Electrical contacts used in elements of connection - Part 019: Contacts, electrical, female, type A, crimp, class S - Product standard; German and English version EN 3155-019:2005 |
| DIN EN 3155-023 | 航空航天系列.連接部件中用電連接器.第023部分: R級、壓緊、A型電連接器矩形插座.產品標準 | Aerospace series - Electrical contacts used in elements of connection - Part 023: Contacts, electrical rectangular, female, type A, crimp, class R - Product standard; German and English version EN 3155-023:2006 |
| DIN EN 3155-027 | 航空航天系列.連接部件中用電連接器.第027部分: R級、壓緊、A型電連接器插座.產品標準 | Aerospace series - Electrical contacts used in elements of connection - Part 027: Contacts, electrical, female, type A, crimp, class R - Product standard; German and English version EN 3155-027:2006 |
| DIN EN 3155-043 | 航空航天系列.連接部件中用電連接器.第043部分:P級、焊接、D型、043插座、尺寸08mm三軸電連接器.產品標準 | Aerospace series - Electrical contacts used in elements of connection - Part 043: Contacts, electrical, triaxial, size 08, female 043, type D, solder, class P - Product standard; German and English version EN 3155-043:2006 |
| DIN EN 3155-045 | 航空航天系列.連接部件用電氣插頭.第045部分:T級、雙壓接、A型插座電連接器.產品標準 | Aerospace series - Electrical contacts used in elements of connection - Part 045: Contacts, electrical, female, type A, double crimping, class T - Product standard; German and English version EN 3155-045:2006 |
| DIN EN 3218-006 | 航空航天系列.金屬殼和螺釘鎖緊的矩形連接器.第006部分:不可拆卸的尺寸為22的焊式接觸件插座.產品標準 | Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 006: Receptacle with non-removable size 22 solder contacts - Product standard; German and English version EN 3218-006:2006 |
| DIN EN 3218-008 | 航空航天系列.金屬殼和螺釘鎖緊的矩形連接器.第008部分:后部抽取式尺寸為20的卷曲觸點插座.產品標準 | Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 008: Receptacle with rear-removable size 20 crimp contacts - Product standard; German and English version EN 3218-008:2006 |
| DIN EN 3545-006 | 航空航天系列.工作溫度為-55℃～175℃塑料殼體鎖緊裝置后部密封或非密封的矩形電連接器.第006部分:固定外殼 | Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 006: Male coding and attachment System for mounting on fixed housing (receptacle) - Product standard; German and English version EN 3545-006:2006 |
| DIN EN 3646-003 | 航空航天系列.持續工作溫度為175℃或200℃的圓形卡口式聯結電連接器.第003部分:方形法蘭安裝插座.產品標準. | Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 003: Receptacle, square flange mounting - Product standard; German and English version EN 3646-003:2006 |
| DIN EN 3646-004 | 航空航天系列.持續工作溫度為175℃或200℃的圓形卡口式聯結電連接器.第004部分:鎖緊螺母安裝插座.產品標準 | Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 004: Receptacle, jam-nut mounting - Product standard; German and English version EN 3646-004:2006 |
| DIN EN 3646-005 | 航空航天系列.持續工作溫度為175℃或200℃的圓形卡口式聯結電連接器.第005部分:方形法蘭安裝密封插座.產品 | Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 005: Receptacle, hermetic, square flange mounting - Product standard; German and English version EN 3646-005:2006 |
| DIN EN 3646-006 | 航空航天系列.持續工作溫度為175℃或200℃的圓形卡口式聯結電連接器.第006部分:鎖緊螺母安裝密封插座.產品 | Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 006: Receptacle, hermetic, jam-nut mounting - Product standard; German and English version EN 3646-006:2006 |
| DIN EN 3646-007 | 航空航天系列.持續工作溫度為175℃或200℃的圓形卡口式聯結電連接器.第007部分:圓形法蘭焊接或銅焊接安裝密 | Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 007: Receptacle, hermetic, round flange, welding or brazing mounting - Product standard; German and English version EN 3646-007:2006 |
| DIN EN 3646-009 | 航空航天系列.持續工作溫度為175℃或200℃的圓形卡口式聯結電連接器.第009部分:插座保護蓋.產品標準 | Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 009: Protective cover for receptacle - Product standard; German and English version EN 3646-009:2006 |
| DIN EN 3646-011 | 航空航天系列.持續工作溫度為175℃或200℃的圓形卡口式聯結電連接器.第011部分模擬插座.產品標準 | Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 011: Dummy receptacle - Product standard; German and English version EN 3646-011:2006 |
| DIN EN 3716-003 | 航空航天系列.數字?jǐn)?shù)據傳輸用帶三維接口的單路連接器.第003部分:焊接插座.產品標準 | Aerospace series - Connectors, single-way with traxial interface, for transmission of digital data - Part 003: Solder receptacle - Product standard; German and English version EN 3716-003:2006 |
| DIN EN 3733-009 | 航空航天系列.連續工作溫度150°C自鎖緊環連接的單路圓形光學連接器.第009部分:EN4532(200mu/280mu纖維)的 | Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 °C continuous - Part 009: Receptacle sub-assembly for cable to EN 4532 (200 ?m/280 ?m fibre) - Product standard; German and English version EN 3733-009:2006 |
| DIN EN 4165-012 | 航空航天系列.矩形模塊電連接器.連續工作溫度175℃.第012部分:系列3的2和4模塊的法蘭安裝插座.產品標準 | Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 012: Flange mounting receptacle 2 and 4 modules, series 3 - Product standard; German and English version EN 4165-012:2005 |
| DIN EN 60169-23 | 射頻連接器.第23部分:外導體內徑3.5mm(0.1378in)用于3.5mm剛性同軸電纜線路的插銷插座式射頻連接器 | Radio-frequency connectors; part 23: pin and socket connector for use with 3,5 mm rigid precision coaxial lines with inner diameter of outer conductor 3,5 mm (IEC 60169-23:1991); German version EN 60169-23:1993 |
| DIN EN 60309-1 | 工業用插頭、插座和耦合器.第1部分:一般要求 | Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements (IEC 60309-1:1999 + A1:2005, modified); German version EN 60309-1:1999 + A1:2007 |
| DIN EN 60309-2 | 工業用插頭、插座和耦合器.第2部分:插銷和插套附件的尺寸互換性要求 | Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories (IEC 60309-2:1999 + A1:2005, modified); German version EN 60309-2:1999 + A1:2007 |
| DIN EN 60526 | 醫用X-射線設備用高壓電纜插頭插座的連接件 | High-voltage cable plug and socket connections for medical X-ray equipment (IEC 60526:1978, modified); German version EN 60526:2004 |
| DIN EN 60598-2-12 Berichtigung 1 | 燈具.第2-12部分:特殊要求.電源插座出口安裝的夜燈 | Luminaires - Part 2-12: Particular requirements - Mains socket-outlet mounted nightlights (IEC 60598-2-12:2006); German version EN 60598-2-12:2006, Corrigenda to DIN EN 60598-2-12 (VDE 0711-2-12):2007-01; CENELEC-Corrigendum December 2006 to EN 60598-2-12:2006 |
| DIN EN 60598-2-12 | 燈具.第2-12部分:特殊要求.電源插座安裝的夜燈(IEC 60598-2-12-2006) | Luminaires - Part 2-12: Particular requirements - Mains socket-outlet mounted nightlights (IEC 60598-2-12:2006); German version EN 60598-2-12:2006 |
| DIN EN 60603-12 | 印制電路用頻率3MHZ以下的連接器.第12部分:集成電路用的一系列插座的尺寸、一般要求和試驗詳細規范 | Connectors for frequencies below 3 MHz for use with printed boards - Part 12: Detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated cicuits (IEC 60603-12:1992); German version EN 60603-12:1998 |
| DIN EN 60603-5 | 印制電路用頻率3MHZ以下的連接器.第5部分:帶有2,54mm(0,1英寸)觸點間距的雙面印制電路板用邊緣插座連接器和 | Connectors for frequencies below 3 MHz for use with printed boards - Part 5: Edge-socket connectors and two-part connectors for double-sided printed boards with 2,54 mm (0,1 in) spacing (IEC 60603-5:1987); German version EN 60603-5:1998 |
| DIN EN 61076-2-102 | 電氣設備連接器.第2-102部分:經質量評定的圓形連接器.外部低壓電源插頭和插座詳細規范 | Connectors for electronic equipment - Part 2-102: Circular connectors with assessed quality; Detail specification for plugs and jacks for external low voltage power supply (IEC 61076-2-102:2002); German version EN 61076-2-102:2002 |
| DIN EN 61076-5 | 直流低頻率模擬及高速數據數字設備連接器.第5部分:經質量評定的串聯插座.分規范 | Connectors for use in d.c., low frequency analogue and digital high-speed data applications - Part 5: In-line sockets with assessed quality; Sectional specification (IEC 61076-5:2001); German version EN 61076-5:2001 |
| DIN EN 61558-2-5 | 電力變壓器安全性.供電設備及類似設備.第2-5部分:電動剃須刀插座變壓器和電動剃須刀插座組件特殊要求 | Safety of power transformers, power supply units and similar - Part 2-5: Particular requirements for control transformers (IEC 61558-2-5:1997); German version EN 61558-2-5:1998 |
| DIN EN 61754-4-1 | 纖維光學連接器接口.第4-1部分:SC型連接器系列.簡化的SC-PC型連接器插座接口 | Fibre optic connector interfaces - Part 4-1: Type SC connector family; Simplified receptacle SC-PC connector interfaces (IEC 61754-4-1:2003); German version EN 61754-4-1:2003 |
| DIN EN 62196-1 | 插頭、插座、車輛耦合器和引入線.電動車輛的傳導充電.250 A a.c.和400 A d.c.及以下的電動車輛的充電 | Plugs, socket-outlets, vehicle couplers and vehicle inlets - Conductive charging of electric vehicles - Part 1: Charging of electric vehicles up to 250 A a.c. and 400 A d.c. (IEC 62196-1:2003); German version EN 62196-1:2003 |
| DIN VDE 0100-550 | 額定電壓可達1000V的電力裝置的安裝.設備選擇和安裝:插塞插座裝置、開關和設備附件 | Erection of power installations with nominal voltages up to 1000 V; selection and erection of equipment; plug-and-socket devices, switches and installations accessories |
| DIN VDE 0620-1 | 家用和類似用途插頭和插座連接.第1部分:一般要求 | Plugs and socket-outlets for household and similar purposes - Part 1: General requirements |
| 編號 | 中文名稱 | 英文名稱 |