微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ANSI B93.95M | 液壓氣動用容積式泵、馬達、整體傳輸.穩態性能的測量 | Hydraulic Fluid Power - Positive Displacement Pumps, Motors, and Integral Transmissions - Determination of Steady-State Performance |
| ANSI C50.41 | 發電站用多相感應電動機 | Polyphase Induction Motors for Power Generating Stations |
| ANSI/AGMA 6019-E | 使用正齒輪,斜齒輪,人字形齒輪,直傘形齒輪或螺旋傘形齒輪的齒輪電動機 | Gearmotors Using Spur, Helical, Herringbone, Straight Bevel or Spiral Bevel Gears |
| ANSI/AGMA 6034-B | 封閉的圓柱形渦輪減速器和齒輪電動機的操作規程 | Practice for Enclosed Cylindrical Wormgear Speed Reducers and Gearmotors |
| ANSI/AMCA 99-2407 | 皮帶或鏈驅動離心式電風扇的馬達位置 | Motor Positions for Belt or Chain Drive Cetrifugal Fans |
| ANSI/API 541 | 250馬力及以上的鼠籠式模繞感應電動機 | Form-Wound Squirrel-Cage Induction Motors 250 Horsepower and Larger |
| ANSI/API 547 | 250馬力和更大的通用模繞鼠籠式感應電動機 | General Purpose Form-Wound Squirrel Cage Induction Motors-250 Horsepower and Larger |
| ANSI/ASTM D2885 | 使用在線分析儀研究和測試馬達法辛烷額定值的試驗方法(05.04) | Research and Motor Method Octane Ratings Using On-Line Analyzers, Test Method for (05.04) |
| ANSI/ASTM F1003 | 電動機救生艇探照燈規范 | Specification for Searchlights on Motor Lifeboats |
| ANSI/ASTM F1134 | 船用電動機和發電機絕緣電阻監測器規范 | Specification for Insulation Resistance Monitor for Shipboard Electrical Motors and Generators |
| ANSI/ASTM F1601 | 中央真空吸塵系統家用電動管嘴馬達壽命評估試驗方法 | Test Method for Motor Life Evaluation of a Household Electric Motorized Nozzle for Central Vacuum Cleaning System |
| ANSI/ASTM F2105 | 測定真空除塵器馬達/風扇系統空氣特性的試驗方法 | Test Method for Measuring Air Performance Characteristics of Vacuum Cleaner Motor/Fan Systems |
| ANSI/ASTM F884 | 中央真空吸塵器馬達壽命評估試驗方法 | Test Method for Motor Life Evaluation of a Central Vacuum Cleaner |
| ANSI/ASTM F922 | 家用電動噴頭電動機壽命評估方法 | Test Method for Motor Life Evaluation of a Household Electric Motorized Nozzle |
| ANSI/EIA 463-A | 交流電動機起動用重型(1型)和輕型(2型)鋁電解固定電容器. | Electrolytic Capacitors for Alternating Current Motor Starting, Heavy Duty (Type 1) and Light Duty (Type 2), Fixed Aluminum |
| ANSI/EIA-463-B | 重型(1型)和輕型(2型)交流電動機起動用固定鋁電解電容器 | Electrolytic Capacitors for Alternating Current Motor Starting, Heavy Duty (Type 1) and Light Duty (Type 2), Fixed Aluminum |
| ANSI/IEEE 1095 | 水電用立式發動機和發動機/電動機安裝指南 | Guide for Installation of Vertical Generators and Generator/Motors for Hydroelectric Applications |
| ANSI/IEEE 11 | 鐵路和道路車輛用旋轉電動機械 | Rail and Road Vehicles, Rotating Electric Machinery for |
| ANSI/IEEE 114 | 單相感應電動機的標準試驗程序 | Standard Test Procedure for Single-Phase Induction Motors |
| ANSI/IEEE 1255 | 同步電動機起動過程中扭距脈動的評價指南 | Guide for Evaluation of Torque Pulsations During Starting of Synchronous Motors |
| ANSI/IEEE 1349 | I級2區危險場所（分類的）使用電動機指南 | Guide for Application of Electric Motors in Class I Division 2 Hazardous (Classified) Locations |
| ANSI/IEEE 252 | 磁隙有液多相感應電動機的試驗程序 | Motors Having Liquid in the Magnetic Gap, Test Procedure for Polyphase Induction |
| ANSI/IEEE 286 | 電動機械定子線圈絕緣的損失角增量測量的推薦實施規程 | Recommended Practice for Measurement of Power Factor Tip-Up of Electric Machinery Stator Coil Insulation |
| ANSI/IEEE 334 | 核電站1E級電動機連續負載質量鑒定 | Qualifying Continuous Duty Class 1E Motors for Nuclear Power Generating Stations |
| ANSI/IEEE 649 | 核電站用合格的1E級電動機控制臺 | Qualifying Class 1E Motor Control Centers for Nuclear Power Generating Stations |
| ANSI/IEEE 841 | 化學工業.功率達500hp及以下的全封閉扇冷卻式重載(TEFC)鼠籠式感應電動機 | Chemical Industry - Severe Duty Totally Enclosed Fan-Cooled (TEFC) Squirrel Cage Induction Motors - Up to and Including 500 hp |
| ANSI/IEEE C37.96 | 交流電動機保護指南 | Guide for AC Motor Protection |
| ANSI/IEEE C50.12 | 5MVA及以上水輪機設備用50和60赫茲凸極其同步發電機和發電機/電動機標準 | Standard for Salient-Pole 50 and 60 Hz Synchronous Generators and Generator/Motors for Hydraulic Turbine Applications Rated 5 MVA and Above |
| ANSI/NECA 402 | 安裝馬達控制臺的推薦操作規程 | Recommended Practice for Installing Motor Control Centers |
| ANSI/NEMA MG1, Revision 1 | 電動機和發電機 | Motors and Generators |
| ANSI/SAE J1375 | 起動馬達的應用考慮 | Cranking Motor Application Considerations |
| ANSI/SAE J1634 | 電動機車的油耗和行車?yán)锍痰脑囼?yàn)程序 | Electric Vehicle Consumption and Range Test Procedure |
| ANSI/SAE J1666 | 電動機車加速、爬坡能力、減速的試驗程序 | Electric Vehicle Acceleration, Gradeability, and Deceleration Test Procedure |
| ANSI/UL 2111 | 電動機過熱保護的安全標準 | Standard for Safety for Overheating Protection for Motors |
| ANSI/UL 674 | I類C、D組和Ⅱ類E、F、G組危險場所用電動機和發電機 | Electric Motors and Generators for Use in Hazardous Locations, Class I Groups C and D, Class II Groups E, F and G |
| ANSI/UL 845 | 電動機控制臺標準(公告日期2004年8月19日) | Standard for Motor Control Centers (bulletin dated August 19, 2004) |
| ASTM D 6758 | 用電動機械法測量土壤和土壤集料實體的硬挺度和表觀模數的標準試驗方法 | Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by an Electro-Mechanical Method |
| ASTM F 1134 | 船用電動機和發電機絕緣電阻監測器 | Standard Specification for Insulation Resistance Monitor for Shipboard Electrical Motors and Generators |
| ASTM F 2106 | 裝有電動機的人力蹋車設計和性能特征評定的標準試驗方法 | Standard Test Methods for Evaluating Design and Performance Characteristics of Motorized Treadmills |
| ASTM F 2361 | 船上服務用低壓(1000VAC或以下)交流電動機訂購的標準指南.最高至500馬力的發動機 | Standard Guide for Ordering Low Voltage (1000 VAC or Less) Alternating Current Electric Motors for Shipboard Service - Up to and Including Motors of 500 Horsepower |
| ASTM F 555 | 家用真空吸塵器的電動機壽命評定的標準試驗方法 | Standard Test Method for Motor Life Evaluation of an Upright Vacuum Cleaner |
| ASTM F 884 | 安裝在內部的(集中式)真空吸塵器的電動機壽命評定的標準試驗方法 | Standard Test Method for Motor Life Evaluation of a Built-In (Central Vacuum) Vacuum Cleaner |
| ASTM F 922 | 家用電動噴頭的電動機壽命評估的標準試驗方法 | Standard Test Method for Motor Life Evaluation of an Electric Motorized Nozzle |
| IEEE 1068 | 石油化學工業用電動機的修理和重繞推薦規范 | (Recommended practice for the repair and rewinding of motors for the petroleum and chemical industry) |
| IEEE 1095 | 水電用立式發電機和發電機/電動機安裝指南 | (Guide for installation of vertical generators and generator/motors for hydroelectric applications) |
| IEEE 1107 | 交流電動機使用固定片散繞線圈用密封隔熱系統的評定 | (Thermal evaluation of sealed insulation systems for AC electric machinery employing random-wound stator coils) |
| IEEE 112 | 多相感應電動機及發電機的試驗規程 | (Test procedure for polyphase induction motors and generators) |
| IEEE 114 | 單相感應電動機的試驗規程 | (Test procedure for single-phase induction motors) |
| IEEE 1255 | 同步電動機起動過程中扭矩脈動的評定 | (Evaluation of torque pulsations during starting of synchronous motors) |
| IEEE 252 | 磁隙中有液體的多相感應電動機的試驗方法 | (Test procedure for polyphase induction motors having liquid in the magnetic gap) |
| IEEE 303 | 第1類中A、B、C、D組第2分部所列電動機輔助裝置用推薦規程 | (Recommended practice for auxiliary devices for motors in class 1, groups A, B, C, and D, division 2 locations) |
| IEEE 841 | 石油和化學工業.最高達370kW(500hp)的全封閉風扇冷卻式重載鼠籠式感應電動機 | (Petroleum and chemical industry - Severe duty Totally Enclosed Fan-Cooled (TEFC) - Squirrel cage induction motors, up to and including 370 kW (500 hp)) |
| IEEE 95 | 帶直流高壓的交流電動機械(2300V及以上)的絕緣試驗操作規程 | (Practice for insulation testing of AC electric machinery (2300 V and above) with high direct voltage) |
| IEEE C 37.96 | 交流電動機保護指南 | (Guide for AC motor protection) |
| UL 1004 | 電動機 | (Electric motors ) |
| UL 1004A | 消防泵電動機 | (Fire pump motors ) |
| UL 1112 | 船用電動機和發電機(啟動、外驅動傾角、配平片、發電機、交流發電機) | (Marine electric motors and generators (cranking, outdrive tilt, trim tab, generators, alternators) ) |
| UL 1182 | 船舶外裝電動推進裝置(旋轉電動機) | (Marine electric outboard propulsion units (trolling motors) ) |
| UL 2111 | 電動機用過熱保護裝置 | (Overheating protection for motors ) |
| UL 60730-2-10A | 家用和類似用途的自動電氣控制裝置.第2部分:電控電動機啟動繼電器的特殊要求 | (Automatic electrical controls for household and similar use - Part 2: Particular requirements for electrically operated motor starting relays ) |
| UL 60730-2-4 | 家用和類似用途的電自動控制器.第2部分:密封和半密封式電動壓縮機的電動機熱保護裝置的特殊要求 | (Automatic electrical controls for household and similar use - Part 2: Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type ) |
| UL 674 | 1類危險場所用電動機和發電機 | (Electric motors and generators for use in division 1 hazardous (classified) locations ) |
| UL 73 | 電動機驅動裝置 | (Motor-operated appliances ) |
| UL 845 | 電動機控制中心 | (Motor control centers ) |
| UL 982 | 家用電動機操作食品加工機械 | (Motor-operated household food preparing machines ) |
| UL 984 | 密封制冷電動機-壓縮機 | (Hermetic refrigerant motor-compressors ) |
| 編號 | 中文名稱 | 英文名稱 |