微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| DIN 14424 | 消防設備.帶電動機的防爆可攜式傳送泵.要求、類型和驗收試驗 | Firefighting equipment - Explosion-proof portable transfer pump with electric motor - Requirements, type and acceptance test |
| DIN 14425 | 防火.帶電動機的可攜式潛水泵 | Fire fighting purposes - Portable submersible pumps with electrical motor |
| DIN 14427 | 消防設備.帶電動機的防爆便攜式危險液體用傳送泵.要求、檢驗 | Firefighting equipment - Explosion-proof portable transfer pump for dangerous fluids, with electric motor - Requirements, testing |
| DIN 1495-1 | 小功率電動機和功率小于37瓦的電動機用有滿足特殊要求的燒結金屬制滑動軸承.球面軸承.尺寸 | Sintered metal plain bearings which meet specific requirements for fractional and subfractional horsepower electric motors; Spherical bearings; Dimensions |
| DIN 1495-2 | 小功率電動機和功率小于37瓦的電動機用有滿足特殊要求的燒結金屬制滑動軸承.圓柱軸承.尺寸 | Sintered metal plain bearings which meet specific requirements for fractional and subfractional horsepower electric motors; Cylindrical bearings; Dimensions |
| DIN 21625 | 礦山輔助通風設備.電動機驅動的風扇 | Auxiliary ventilation in coalmines; fans with electric motor drive |
| DIN 24331 | 液壓流體力學.液壓泵和液壓馬達、幾何排量-容量、流量 | Oilhydraulic; hydraulic pumps and hydraulic engines, geometrical displacement-volume, rates |
| DIN 25620-5 | 鐵路車輛零件術語.車身結構、電動機車車身框架 | Terms for railway vehicle parts; body structure; body framework for electric locomotives |
| DIN 25621-5 | 鐵路車輛零件術語.第5部分:機車襯套和內部裝修、電動機車襯套 | Terms for railway vehicle parts; body lining and interior fittings, body lining for electric locomotives |
| DIN 332-2 | 旋轉電動機械用軸端帶螺紋的60度中心孔 | Center holes 60° with thread for shaft ends for rotating electrical machines |
| DIN 4000-39 | 旋轉電動機械的產品特性圖表 | Tabular layouts of article characteristics for rotating electrical machines |
| DIN 40030 | 通過受控的靜態電力轉換器從交流供電系統直接向直流電動機輸送的額定電壓 | Rated voltages of DC-motors directly fed by controlled static power convertors from AC-power systems |
| DIN 42013 | 小型電動機的球軸承軸向調節用彈簧墊圈 | Spring washers for axial adjustment of ball bearings of small motors |
| DIN 42017 | 小型電動機線路接頭的配置和標記 | Marking and coordination of the connecting leads for small motors |
| DIN 42020 | 帶公差環的小型電動機的軸端 | Shaft ends with tolerance ring for small motors |
| DIN 42027 | 伺服電動機.分類、概述 | Servo motors; classification, survey |
| DIN 42028-1 | 小型電動機用帶插座和連接片的連接器.型式和尺寸 | Connectors with receptacles and tabs for small motors; forms and dimensions |
| DIN 42672-2 | B3型設計帶滾珠軸承的內冷鼠籠式交流電多相電動機.第2部分:最大的外殼尺寸 | Alternating-current polyphase motors with ventilated enclosures and squirrel-cage, design B3, with ball bearings; maximum envelope dimensions |
| DIN 42673-4 | B3型設計帶滾珠軸承的風冷鼠籠式交流電多相電動機.第4部分:最大的外殼尺寸 | Totally-enclosed fan-cooled alternating-current polyphase motors with squirrel-cage, design B3, with ball bearings, maximum envelope dimensions |
| DIN 42676-2 | B5型設計帶滾珠軸承的內冷鼠籠式交流電多相電動機.第2部分:最大的外殼尺寸 | Alternating-current polyphase motors with ventilated enclosures and squirrel-cage, design B5, with ball bearings; maximum envelope dimensions |
| DIN 42677-4 | B5型、B10型、B14型設計帶滾珠軸承的風冷鼠籠式交流電多相電動機.第4部分:B5型、B14型設計的最大外殼尺寸 | Totally enclosed fan-cooled alternating-current polyphase motors with squirrel-cage, design B5, B10, B14, with ball bearings; maximum envelope dimensions for design B5, B14 |
| DIN 42692 | 工業縫紉機.帶離合器的電動機用帶槽皮帶輪.尺寸 | Industrial sewing machines; grooved pulleys for motors with clutch, dimensions |
| DIN 42703 | 工業縫紉機.帶離合器的電動機的皮帶護檔.主要尺寸 | Industrial sewing machines; belt guards for motors fitted with a clutch; main dimensions |
| DIN 42706 | 工業縫紉機.有定位裝置的帶離合器電動機.主要尺寸 | Industrial sewing machines; clutch motor with position device; main dimensions |
| DIN 42925 | 額定電壓為400 V至690 V的三相籠型感應電動機用接線箱的電纜引入線 | Terminal box cable entries for three-phase cage induction motors at rated voltages from 400 V to 690 V |
| DIN 42955 | 旋轉電動機械安裝法蘭和軸外伸部徑向跳動公差、試驗 | Tolerances of shaft extension run-out and of mounting flanges for rotating electrical machinery, test |
| DIN 42961 | 旋轉電動機械功率銘牌.結構 | Rating plates for rotating electrical machinery; design |
| DIN 42962-1 | 額定電壓6KV的旋轉電動機械端子的排列 | Arrangement of terminals for rotating electrical machinery, rated voltage 6 kV |
| DIN 42962-2 | 額定電壓10KV旋轉電動機械用端子的排列 | Arrangement of terminals for rotating electrical machinery, rated voltage 10 kV |
| DIN 43043-1 | 電動機用雙鉗位刷握器.第1部分:主要尺寸 | Double clamping brush-holders for electrical machinery; principal dimensions |
| DIN 43043-2 | 電動機械用帶3個螺栓雙夾緊刷握.主要尺寸 | Double clamping brush-holder with 3 bolts for electrical machinery; main dimensions |
| DIN 43101-6 | 電力牽引機車.牽引電動機零件術語 | Rolling stock for electric traction; terms for parts of traction motors |
| DIN 43200 | 電動機用滾柱軸承.維護.安裝.潤滑.拆卸.清洗和再使用 | Roller bearings for electrical machines of electric vehicles - Preservation, mounting, lubrications, dismounting, cleaning and reutilization |
| DIN 45635-57 | 機器排放的噪聲測量.空氣傳播的噪聲.第57部分:包洛面法.外側馬達 | Measurement of noise emitted by machines; airborne noise emission; enveloping surface method; outboard motors |
| DIN 46062 | 直流電動機和交流滑環感應電動機的起動器 | Starter for d.c.-motors and a.c.-slip-ring induction motors |
| DIN 46406-1 | 電動機械用綁線.磁性鋼絲.拉制鍍錫鋼絲 | Binding Wires for Electrical Machines; Magnetic Steel Wire, Drawn and Tinned |
| DIN 46406-2 | 電動機械用綁線.非磁化的拉制鍍錫鋼絲 | Binding Wires for Electrical Machines; Non-magnetic Steel Wire, Drawn and Tinned |
| DIN 72782-1 | 風擋雨刮子.第1部分:雨刮子電動機.正齒輪傳動的電動機 | Windshield wipers; wiper motors, rotors with spur-gear drive |
| DIN 72782-3 | 風擋雨刮子.第3部分:雨刮子電動機.蝸輪裝置傳動的電動機 | Windshield wipers; wiper motors, rotors with worm-gear drive |
| DIN 8979 | 電動機式制冷壓縮機的高溫試驗 | High temperature test for refrigeration motor compressors |
| DIN CLC/TS 60034-25 | 旋轉電機.第25部分:專為變流電源設計的籠型感應電動機的設計和性能指南 | Rotating electrical machines - Part 25: Guide for the design and performance of cage induction motors specifically designed for converter supply (IEC/TS 60034-25:2004); German version CLC/TS 60034-25:2005 |
| DIN EN 137000 | 總規范.配合電動機使用的非固態電解質的固定鋁電解交流電容器 | Generic specification - Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for use with motors; German version EN 137000:1997 |
| DIN EN 137100 | 分規范.電動機起動器用的非固態電解質的固定鋁電解交流電容器.資格認證 | Sectional specification - Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for motor starter applications - Qualification approval; German version EN 13710:1997 |
| DIN EN 137101 | 空白詳細規范.電動機起動器用的非固態電解質的固定鋁電解交流電容器.資格認證 | Blank detail specification - Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for motor starter applications - Qualification approval; German version EN 137101:1995 |
| DIN EN 1646-2 | 休閑旅游活動食宿車.電動機的活動拖掛車.第2部分:用戶有效負載 | Leisure accommodation vehicles - Motor caravans - Part 2: User payload; German version EN 1646-2:1998 |
| DIN EN 29775 | 游艇.功率為15KW至40KW單個舷外電動機的遙控系統 | Small craft; remote steering systems for single outboard motors of 15 kW to 40 kW (ISO 9975:1990); German version EN 29975:1993 |
| DIN EN 45510-2-5 | 發電廠設備購置指南.第2-5部分:電氣設備.馬達 | Guide for procurement of power station equipment - Part 2-5: Electrical equipment; Motors; German version EN 45510-2-5:2002 |
| DIN EN 50347 | 有標準尺寸和輸出的通用三相感應電動機.框數56-315,法蘭數65-740 | General purpose three-phase induction motors having standard dimensions and outputs - Frame numbers 56 to 315 and flange numbers 65 to 740; German version EN 50347:2001 |
| DIN EN 60252-1 | 交流電動機的電容器.第1部分:總則.性能、試驗和額定值.安全要求.安裝和操作指南 | AC motor capacitors - Part 1: General; Performance, testing and rating; Safety requirements; Guide for installation and operation (IEC 60252-1:2001); German version EN 60252-1:2001 |
| DIN EN 60252-2 | 交流電動機電容器.第2部分:電動機起動電容器 | AC motor capacitors - Part 2: Motor start capacitors (IEC 60252-2:2003); German version EN 60252-2:2003 |
| DIN EN 60349-2 | 鐵路設施.鐵路和公路車輛用旋轉電機.第2部分:電子變流器饋電交流電動機 | Railway applications - Rotating electrical machines for rail and road vehicles - Part 2: Electronic converter-fed alternating current motors (IEC 60349-2:1993, modified); German version EN 60349-2:2001 |
| DIN EN 60644 | 電動機電路高壓熔斷器規范 | Specification for high-voltage fuse-links for motor circuit applications (IEC 60644:1979); German version EN 60644:1993 |
| DIN EN 60730-2-10 | 家用和類似用途的電氣自動控制器.第2-10部分:電動機起動繼電器的特殊要求 | Automatic electrical controls for househould and similar use - Part 2-10: Particular requirements for motor starting relays (IEC 60730-2-10:1991, modified + A1:1994 + A2:2001, modified); German version EN 60730-2-10:1995 + A1:1996 + A2:2002 |
| DIN EN 60947-4-1 | 低壓開關設備和控制設備.第4-1部分:接觸器和電動機啟動器.機電接觸器和電動機啟動器 | Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters (IEC 60947-4-1:2000 + Corrigendum:2001 + A1:2002 + A2:2005); German version EN 60947-4-1:2001 + A1:2002 + A2:2005 |
| DIN EN 60947-4-2 | 低壓開關設備和控制設備.第4-2部分:接觸器和電動機起動器.交流半導體電動機控制器和電動機起動器 (IEC 6094 | Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters; AC semiconductor motor controllers and starters (IEC 60947-4-2:1999 + A1:2001); German version EN 60947-4-2:2000 + A1:2002 |
| DIN EN 60947-4-3 | 低壓開關和控制設備.第4-3部分:接觸器和電機起動器.交流半導體控制器和非電動機負載用接觸器 | Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters; ac semiconductor controllers and contactors for non-motor loads (IEC 60947-4-3:1999); German version EN 60947-4-3:2000 |
| DIN EN 61029-2-1 | 移動電動機具安全性.第2-1部分:圓盤鋸工作臺特殊要求 | Safety of transportable motor-operated electric tools - Part 2-1: Particular requirements for circular saw benches (IEC 61029-2-1:1993 + A1:1999 + A2:2001, modified); German version EN 61029-2-1:2002 |
| DIN EN 61029-2-5 | 移動電動機具安全性.第2-5部分:帶鋸特殊要求 | Safety of transportable motor-operated electric tools - Part 2-5: Particular requirements for band saws (IEC 61029-2-5:1993 + A1:2001, modified); German version EN 61029-2-5:2002 |
| DIN EN 61377 | 鐵路.車輛.反向供電交流電動機及其控制的聯合檢驗 | Railway applications - Rolling stock - Combined testing of inverter-fed alternating current motors and their control (IEC 61377:1996); German version EN 61377:1996 + Corrigendum:1996 |
| DIN EN 61377-2 | 鐵路設施.機車車輛.聯合試驗.第2部分:反向直流牽引電動機及其控制設備 | Railway applications - Rolling stock; Combined testing - Part 2: Chopper-fed direct current traction motors and their control (IEC 61377-2:2002); German version EN 61377-2:2002 |
| DIN EN 61377-3 | 鐵路設施.鐵路車輛.第3部分:間接變流器供電的交流電動機及其控制系統的組合測試 | Railway applications - Rolling stock - Part 3: Combined testing of alternating current motors, fed by an indirect convertor, and their control systems (IEC 61377-3:2002); German version EN 61377-3:2002 |
| DIN EN ISO 11498 | 牙科手持器械.牙科用低壓電動機 | Dental handpieces - Dental low-voltage electrical motors (ISO 11498:1997); German version EN ISO 11498:1999 |
| DIN EN ISO 5163 | 石油產品.發動機和航空燃料的爆震特性測定.馬達法 | Petroleum products - Determination of knock characteristics of motor and aviation fuels - Motor method (ISO 5163:2005); German version EN ISO 5163:2005 |
| DIN EN ISO 6721-2 | 塑料.電動機械性能測定.第2部分:扭擺法 | Plastics - Determination of dynamic mechanical properties - Part 2: Torsion-pendulum method (ISO 6721-2:1994, including Technical Corrigendum 1:1995); German version EN ISO 6721-2:1996 |
| DIN EN ISO 6721-3 | 塑料.電動機械性能測定.第3部分:彎曲振動.共振法 | Plastics - Determination of dynamic mechanical properties - Part 3: Flexural vibration; resonance-curve (ISO 6721-3:1994, including Technical Corrigendum 1:1995); German version EN ISO 6721-3:1996 |
| DIN IEC/TS 60034-17 | 旋轉電機.第17部分:變頻供電的鼠籠式感應電動機.應用指南 | Rotating electrical machines - Part 17: Cage induction motors when fed from converters - Application guide (IEC/TS 60034-17:2002 + Corrigendum:2003) |
| DIN ISO 3019-1 | 液壓傳動.容積泵和馬達的安裝法蘭和軸伸的尺寸及標注代號.第1部分:用米制單位表示的英制系列 | Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Part 1: Inch series shown in metric units (ISO 3019-1:2001) |
| DIN ISO 3019-2 | 液壓傳動.容積式泵和馬達的安裝法蘭和軸伸的尺寸及標注代號.第2部分:米制系列 | Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Part 2: Metric series (ISO 3019-2:2001) |
| DIN ISO 4391 | 液壓傳動.泵、電動機和整體式傳動裝置.參數定義和字母符號 | Hydraulic fluid power; pumps, motors and integral transmissions; parameter definitions and letter symbols |
| DIN ISO 4409 | 液壓里動力.正排量泵、電動機和整體傳動裝置.靜態穩定性的測定 | Hydraulic fluid power; positive displacement pumps, motors and integral transmissions; determination of steady-state performance; identical with ISO 4409:1986 |
| DIN ISO 8426 | 液壓流體動力.正排量泵和電動機.推導容積的測定 | Hydraulic fluid power; positive displacement pumps and motors; determination of derived capacity; identical with ISO 8426:1988 |
| DIN ISO 8856 | 道路車輛.起動電動機電氣性能.試驗方法和一般要求 | Road vehicles - Electrical performance of starter motors - Test methods and general requirements (ISO 8856:1995) |
| DIN ISO 9457-1 | 道路車輛.米制起動器電動機小齒輪.第1部分:普通小齒輪 | Road vehicles - Metric starter motor pinions - Part 1: Currently used pinions (ISO 9457-1:1991) |
| DIN ISO 9457-2 | 道路車輛.米制起動器電動機小齒輪.第2部分:20度壓力角小齒輪 | Road vehicles - Metric starter motor pinions - Part 2: Pinions with 20° pressure angle (ISO 9457-2:1994) |
| DIN ISO 9458 | 公路車輛.起動電動機的電氣連接件:等同采用 ISO 9458:1988 | Road vehicles; starter motor electrical connections; identical with ISO 9458:1988 |
| DIN-Fachbericht 72 | 汽車附加傳動裝置用電動機噪聲質量的錄入與文獻加工 | () |
| 編號 | 中文名稱 | 英文名稱 |