微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ANSI C135.17 | 架空線路架設用鍍鋅鐵制螺栓型帶導向螺紋的絕緣子柱銷 | Insulator Pins with Lead Threads for Overhead Line Construction, Galvanized Ferrous Bolt-Type |
| ANSI/API Std.600 | 石油和天然氣工業用螺栓接合鋼制帽狀閥門 | Bolted Bonnet Steel Gate Valves for Petroleum and Natural Gas Industries |
| ANSI/ASME B18.10 | 軌道螺栓及螺母 | Track Bolt and Nuts |
| ANSI/ASME B18.15 | 鍛造有眼螺栓 | Forged Eyebolts |
| ANSI/ASME B18.2.1 | 四方和六角形螺栓和螺釘(英寸系列) | Square and Hex Bolts and Screws (Inch Series) |
| ANSI/ASME B18.2.1a | 四方和六角形螺栓和螺釘(英制系列) | Square and Hex Bolts and Screws (Inch Series) |
| ANSI/ASME B18.2.3.10M | 四方頭螺栓(米制系列) | Square Head Bolts (Metric Series) |
| ANSI/ASME B18.2.3.5M | 米制六角形螺栓 | Bolts, Metric Hex |
| ANSI/ASME B18.2.3.6M | 米制重六角形螺栓 | Bolts, Metric Heavy Hex |
| ANSI/ASME B18.2.3.7M | 米制重六角形結構螺栓 | Bolts, Metric Heavy Hex Structural |
| ANSI/ASME B18.2.8 | 螺栓、螺釘和螺柱的通孔 | Clearance Holes for Bolts, Screws and Studs |
| ANSI/ASME B18.2.9 | 螺栓和螺釘用平直度量規和精確計量 | Straightness Gage and Gaging for Bolts and Screws |
| ANSI/ASME B18.5 | 圓頭螺栓(英寸系列) | Round Head Bolts (Inch Series) |
| ANSI/ASME B18.5.2.1M | 米制園頭短方頸桿的螺栓 | Metric Round Head Short Square Neck Bolts |
| ANSI/ASME B18.5.2.2M | 米制圓頭方頸螺栓 | Bolts, Metric Round Head Square Neck |
| ANSI/ASME B18.5.2.3M | 米制大圓頭方頸螺栓 | Round Head Square Neck Bolts With Large Head (Metric) |
| ANSI/ASME B18.9 | 防松螺栓 | Plow Bolts |
| ANSI/ASME B5.1M | T型槽.T型槽螺栓、螺母和榫舌 | T-Slots - Their Bolts, Nuts, and Tongues |
| ANSI/ASME PCC-1 | 壓力限制螺栓連接法蘭聯軸節組件的導則 | Guidelines for Pressure Boundary Bolted Flange Joint Assembly |
| ANSI/ASTM A193/A 193M | 高溫設備用合金鋼和不銹鋼螺栓材料規范 | Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service |
| ANSI/ASTM A194/A 194M | 高壓和高溫設備用碳素鋼與合金鋼螺栓和螺母規范 | Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure and High-Temperature Service |
| ANSI/ASTM A320/A 320M | 低溫設備用合金鋼螺栓材料規范 | Specification for Alloy-Steel Bolting Materials for Low-Temperature Service |
| ANSI/ASTM F1142 | 半埋入式防油、防水、螺栓連接人孔蓋組件規范 | Specification for Manhole Cover Assembly, Bolted, Semi-Flush, Oiltight and Watertight |
| ANSI/ASTM F1144 | 半埋入式防油、防水螺栓連接的人孔蓋組件規范 | Specification for Manhole Cover Assembly, Bolted, Hinged, Semi-Flush, Oiltight and Watertight |
| ANSI/ASTM F1179 | 螺栓螺紋鎖定厭氧復合物檢驗程序慣例 | Practice for Inspection Procedure for Use of Anaerobic Thread Locking Compounds with Studs |
| ANSI/ASTM F704 | 管道系統法蘭接頭用螺栓長度的選用慣例 | Practice for Selecting Bolting Lengths for Piping System Flanged Joints |
| ANSI/AWWA D103 | 儲水用加工涂覆螺栓連接鋼罐 | Water Storage, Factory-Coated Bolted Steel Tanks for |
| ANSI/IEEE C135.1 | 架空線結構用鍍鋅鋼螺栓和螺母標準 | Standard for Zinc-Coated Steel Bolts and Nuts for Overhead Line Construction |
| ANSI/SAE J1061 | 普通螺栓、螺釘和雙頭螺栓的表面不均勻性 | Surface Discontinuities on General Application Bolts, Screws, and Studs |
| ANSI/SAE J123 | 螺栓、螺紋、螺母表面斷續疲勞試驗 | Surface Discontinuities on Bolts, Screws, and Studs in Fatigue Applications |
| ANSI/SAE J2295 | 緊固件.零件標準帽螺釘、六角頭螺栓和六角螺母 | Fasteners - Part Standard Cap Screws, Hex Bolts, and Hex Nuts |
| ANSI/SAE J370 | 建筑和工業機械用螺栓和有頭螺釘尺寸 | Bolt and Capscrew Sizes for Use in Construction and Industrial Machinery |
| ANSI/SAE J485 | 扁銷用螺栓孔與螺母螺桿尾和槽 | Holes in Bolt and Screw Shanks and Slots in Nuts for Cotter Pins |
| ANSI/SAE J518 | 四螺栓拼合法蘭型液壓法蘭管、管道及軟管接頭 | Hydraulic Flanged Tube, Pipe, and Hose Connections, Four-Bolt Split Flange Type |
| ANSI/SAE J663 | 制動襯片鉚釘和制動塊螺栓 | Rivets for Brake Linings and Bolts for Brake Blocks |
| ASME B 18.2.1 Erratum | 方頭和六角頭螺栓和螺釘(英寸系列).對ASME B 18.2.1-1996的勘誤 | (Square and hex bolts and screws (Inch series); Erratum to ASME B18.2.1-1996) |
| ASME B18.10 | 道軌用螺栓和螺母 | (Track bolts and nuts) |
| ASME B18.2.1 | 英制方頭和六角頭螺栓和螺釘(英制系列) | (Square and hex bolts and screws (Inch series)) |
| ASME B18.2.1a Addenda | 方頭和六角頭螺栓和螺釘(英制系列).附錄 | (Square and hex bolts and screws (inch series); Addenda) |
| ASME B18.2.3.5M Errata | 米制六角頭螺栓,正誤表 | (Metric hex bolts; Errata) |
| ASME B18.2.3.5M | 米制六角頭螺栓 | (Metric hex bolts) |
| ASME B18.2.3.6M Errata | 米制重型六角頭螺栓,正誤表 | (Metric heavy hex bolts; Errata) |
| ASME B18.2.3.6M | 米制重型六角頭螺栓 | (Metric heavy hex bolts) |
| ASME B18.2.3.7M Errata | 米制重型六角頭結構螺栓,正誤表 | (Metric heavy hex structural bolts; Errata) |
| ASME B18.2.3.7M | 米制加重六角頭結構螺栓 | (Metric heavy hex structural bolts) |
| ASME B18.5 | 英制圓頭螺栓 | (Round head bolts (Inch series)) |
| ASME B18.5.2.1M Erratum | 米制圓頭短方頸螺栓.技術勘誤 | (Metric round head short square neck bolts; Erratum) |
| ASME B18.5.2.1M | 米制圓頭短方頸螺栓 | (Metric round head short square neck bolts) |
| ASME B18.5.2.2M | 米制圓頭方頸螺栓 | (Metric round head square neck bolts) |
| ASME B18.5.2.3M | 帶大頭的米制圓頭方頸螺栓 | (Round head square neck bolts with large head (Metric series)) |
| ASME B18.9 | 防松螺栓(英制系列) | (Plow bolts (inch series)) |
| ASME B5.1M | T型槽及其螺栓.螺母和榫舌 | (T-slots, their bolts, nuts, and tongues) |
| ASME PCC-1 | 壓力邊界螺栓法蘭連接組件導則 | (Guidelines for pressure boundary bolted flange joint assembly) |
| ASTM A 1014/A 1014M | 高溫設備用沉淀硬化螺栓材料(UNS N07718)的標準規范 | Standard Specification for Precipitation-Hardening Bolting Material (UNS N07718) for High Temperature Service |
| ASTM A 183 | 碳素鋼制軌條螺栓和螺母的標準規范 | Standard Specification for Carbon Steel Track Bolts and Nuts |
| ASTM A 193/A 193M | 高溫或高壓設備及其他特殊用途的合金鋼和不銹鋼螺栓連接材料用標準規范 | Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or High Pressure Service and Other Special Purpose Applications |
| ASTM A 194/A 194Ma | 高壓或高溫設備或高壓高溫設備的螺栓用碳素鋼與合金鋼螺母的標準規范 | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both |
| ASTM A 307a | 抗拉強度為60000PSI的碳素鋼螺栓和柱頭螺栓用標準規范 | Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength |
| ASTM A 320/A 320Ma | 低溫設備用合金鋼和不銹鋼螺栓材料的標準規范 | Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for Low-Temperature Service |
| ASTM A 325 | 最小抗拉強度為120/105ksi的熱處理鋼結構螺栓的標準規范 | Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength |
| ASTM A 325M | 最小抗拉強度為830Mpa的熱處理鋼結構螺栓標準規范(米制) | Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric] |
| ASTM A 354 | 淬火和回火合金鋼螺栓、螺柱和其它外螺紋緊固件的標準規范 | Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners |
| ASTM A 394 | 鋼制輸電塔鍍鋅螺栓和裸螺栓用標準規范 | Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare |
| ASTM A 437/A 437M | 高溫用經特殊處理的渦輪型合金鋼螺栓材料標準規范 | Standard Specification for Alloy-Steel Turbine-Type Bolting Material Specially Heat Treated for High-Temperature Service |
| ASTM A 449a | 通用最低拉伸強度為120/105/90ksi的熱處理鋼制六角頭螺釘、螺栓和螺柱用標準規范 | Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use |
| ASTM A 453/A 453M | 具有同奧氏體不銹鋼相似的膨脹系數的耐高溫螺栓材料用標準規范 | Standard Specification for High-Temperature Bolting Materials, with Expansion Coefficients Comparable to Austenitic Stainless Steels |
| ASTM A 490 | 最小抗拉強度為150ksi的熱處理合金鋼結構螺栓標準規范 | Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength |
| ASTM A 490Ma | 結構鋼接頭用10.9和10.9.3級高強度鋼螺栓(米制)標準規范 | Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric] |
| ASTM A 540/A 540M | 特殊用合金鋼螺栓材料的標準規范 | Standard Specification for Alloy-Steel Bolting Materials for Special Applications |
| ASTM D 5652 | 木和木基制品中螺栓連接的標準試驗方法 | Standard Test Methods for Bolted Connections in Wood and Wood-Base Products |
| ASTM F 1142 | 防油防水半嵌入螺栓連接檢查孔蓋組件標準規范 | Standard Specification for Manhole Cover Assembly Bolted, Semi-Flush, Oiltight and Watertight |
| ASTM F 1143 | 防油防水隆起的螺栓連接檢查孔蓋組件標準規范 | Standard Specification for Manhole Cover Assembly, Bolted, Raised, Oiltight and Watertight |
| ASTM F 1144 | 防油防水半嵌入螺栓鉸接檢查孔蓋組件 | Standard Specification for Manhole Cover Assembly, Bolted, Semi-Flush, Oiltight and Watertight, Hinged |
| ASTM F 1179 | 螺栓螺紋鎖定厭氧復合物使用的檢驗程序 | Inspection Procedure for Use of Anaerobic Thread Locking Compounds with Studs |
| ASTM F 1554 | 屈服應力為36、55和105ksi的鋼制錨固螺栓用標準規范 | Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength |
| ASTM F 1852 | 120/105KSI最小抗張強度的熱處理鋼制"擰松式"張力控制結構螺栓/螺母/墊圈配件的標準規范 | Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength |
| ASTM F 2280 | 150ksi最低拉伸強度的熱螺紋鋼制"扭開"型拉伸控制結構螺栓/螺母/襯墊組件的標準規范 | Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength |
| ASTM F 2281 | 耐熱及高溫設備用不銹鋼和鎳合金螺栓、六角頭螺釘和螺柱的標準規范 | Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications |
| ASTM F 2328 | 淬火和回火的螺紋鋼螺栓、螺母和螺柱的脫碳和滲碳性測定的標準試驗方法 | Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs |
| ASTM F 2328M | 淬火和回火的螺紋鋼螺栓、螺釘和螺柱的脫碳和滲碳性測定的標準試驗方法(米制) | Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs [Metric] |
| ASTM F 2329 | 碳鋼和合金鋼螺栓、螺釘、墊圈、螺母和特殊螺紋緊固件用熱浸鍍鋅覆層的標準規范 | Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners |
| ASTM F 2437 | 與螺旋帽、螺栓、錨和螺柱用碳和合金鋼可壓縮墊圈式直讀張力指示器的標準規范 | Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs |
| ASTM F 468 | 一般用途有色金屬螺栓、六角頭螺釘及螺柱標準規范 | Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use |
| ASTM F 468M | 一般用途有色金屬螺栓、六角頭螺釘及螺柱標準規范(米制) | Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use [Metric] |
| ASTM F 541 | 合金鋼有眼螺栓的標準規范 | Standard Specification for Alloy Steel Eyebolts |
| ASTM F 593 | 不銹鋼螺栓,六角頭螺釘及螺柱標準規范 | Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs |
| ASTM F 704 | 管道系統法蘭接頭用螺栓長度選擇的標準實施規程 | Standard Practice for Selecting Bolting Lengths for Piping System Flanged Joints |
| ASTM F 738M | 不銹鋼米制螺栓、螺釘及螺柱(米制)的標準規范 | Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs |
| ASTM F 788/F 788M | 英制及米制系列的螺栓、螺釘及螺柱的表面不均勻性的標準規范 | Standard Specification for Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series |
| ASTM F 901 | 鋁制傳輸塔用螺栓及螺母 | Standard Specification for Aluminum Transmission Tower Bolts and Nuts |
| ASTM G 116 | 大氣電流腐蝕用繞線螺栓試驗 | Standard Practice for Conducting Wire-on-Bolt Test for Atmospheric Galvanic Corrosion |
| IEEE C 135.1 | 架空線結構用鍍鋅鋼螺栓和螺母 | (Zinc-coated steel bolts and nuts for overhead line construction) |
| 編號 | 中文名稱 | 英文名稱 |