微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| DL/T 694 | 高溫緊固螺栓超聲波檢驗技術導則 | () |
| DL/T 764.1 | 電力金具專用緊固件 六角頭帶銷孔螺栓 | () |
| DL/T 764.4 | 輸電線路鐵塔及電力金具緊固用冷鐓熱浸鍍鋅螺栓與螺母 | () |
| FZ/T 90027 | 裝螺栓螺釘用的沖孔尺寸 | () |
| FZ/T 90068 | 裝螺栓用的鑄孔尺寸 | () |
| GB/T 10 | 沉頭方頸螺栓 | Flat countersunk square neck bolts |
| GB/T 11 | 沉頭帶榫螺栓 | Flat countersunk nib bolts |
| GB/T 12 | 半圓頭方頸螺栓 | Cup head square neck bolts |
| GB/T 1228 | 鋼結構用高強度大六角頭螺栓 | High strength bolts with large hexagon head for steel structures |
| GB/T 1231 | 鋼結構用高強度大六角頭螺栓、大六角螺母、墊圈技術條件 | Specifications of high strength bolts with large hexagon head,large hexagon nuts,plain washers for steel structures |
| GB/T 13 | 半圓頭帶榫螺栓 | Cup head nib bolts |
| GB/T 14 | 大半圓頭方頸螺栓C級 | Cup head square neck bolts with large head--Product grade C |
| GB/T 15 | 大半圓頭帶榫螺栓 | Cup head nib bolts with large head |
| GB/T 152.4 | 緊固件六角頭螺栓和六角螺母用沉孔 | Fasteners--Counterbores for hexagonbolts and nuts |
| GB/T 158 | 機床工作臺T形槽和相應螺栓 | Machine tool tables--T-slots and corresponding bolts |
| GB/T 16674.1 | 六角法蘭面螺栓小系列 | Hexagon bolts with flange--Small series |
| GB/T 16674.2 | 六角法蘭面螺栓細牙小系列 | Hexagon bolts with flange with metric fine pitch thread--Small series |
| GB/T 16938 | 緊固件 螺栓、螺釘、螺柱和螺母 通用技術條件 | () |
| GB/T 16939 | 鋼網架螺栓球節點用高強度螺栓 | High strength bolts for joints of space grid structures |
| GB/T 18230.1 | 栓接結構用大六角頭螺栓螺紋長度按GB/T 3106C級8.8和10.9級 | Hexagon bolts for high-strength structural bolting with large width across flats(thread lengths according to GB/T 3106)--Product grade C--Property classes 8.8 and 10.9 |
| GB/T 18230.2 | 栓接結構用大六角頭螺栓短螺紋長度C級8.8和10.9級 | Hexagon bolts forhigh-strength structural bolting with large width across flats(short thread length)--Product grade C--Property classes 8.8 and 10.9 |
| GB/T 19990 | 土壤耕作機械 土壤工作部件固定螺栓 | Equipment for working the soil-Fixing bolts for soil working element |
| GB/T 20410 | 渦輪機高溫螺栓用鋼 | Steels for turbine bolts at high temperature |
| GB/T 21934 | 土方機械 沉頭方頸螺栓 | Earth-moving machinery - Plough bolt |
| GB/T 27 | 六角頭鉸制孔用螺栓A和B級 | Hexagon fit bolts--Product grade A and B |
| GB/T 28 | 六角頭螺桿帶孔鉸制孔用螺栓A和B級 | Hexagon fit bolts with split pin hole on shank--Product grade A and B |
| GB/T 29.1 | 六角頭頭部帶槽螺栓A和B級 | Hexagon bolts with slot on head--Product grade A and B |
| GB/T 29.2 | 十字槽凹穴六角頭螺栓 | Cross recessed hexagon bolts with indentation |
| GB/T 3098.1 | 緊固件機械性能螺栓、螺釘和螺柱 | Mechanical properties of fasteners--Bolts，screws and studs |
| GB/T 3098.10 | 緊固件機械性能有色金屬制造的螺栓、螺釘、螺柱和螺母 | Mechanical properties of fasteners--Bolts，screws，studs and nuts made of non-ferrous metals |
| GB/T 3098.13 | 緊固件機械性能螺栓與螺釘?shù)呐ぞ卦囼?yàn)和破壞扭矩公稱直徑1～10mm | Mechanical properties of fasteners--Torsional test and minimum torques for bolts and screws with nominal diameters from 1mm to 10mm |
| GB/T 3098.6 | 緊固件機械性能不銹鋼螺栓、螺釘和螺柱 | Mechanical properties of fasteners--Bolts，screws and studs made of stainless-steel |
| GB/T 31.1 | 六角頭螺桿帶孔螺栓A和B級 | Hexagon bolts with split pin hole on shank--Product grade A and B |
| GB/T 31.2 | 六角頭螺桿帶孔螺栓細桿B級 | Hexagon bolts with split pin hole on shank--Reduced shank--Product grade B |
| GB/T 31.3 | 六角頭螺桿帶孔螺栓細牙A和B級 | Hexagon bolts with split pin hole on shank--Fine pitch thread--Product grade A and B |
| GB/T 3103.1 | 緊固件公差螺栓、螺釘、螺柱和螺母 | Tolerances for fasteners--Bolts，screws，studs and nuts |
| GB/T 3103.2 | 緊固件公差用于精密機械的螺栓、螺釘和螺母 | Tolerances for fasteners--Bolts，screws and nuts for fine mechanics |
| GB/T 3105 | 普通螺栓和螺釘頭下圓角半徑 | General purpose bolts and screws--Radii under the head |
| GB/T 3106 | 螺栓、螺釘和螺柱的公稱長度和普通螺栓的螺紋長度 | Bolts，screws and studs--Nominal lengths，and thread lengths for general purpose bolts |
| GB/T 32.1 | 六角頭頭部帶孔螺栓A和B級 | Hexagon bolts with wire holes on head--Product grade A and B |
| GB/T 32.2 | 六角頭頭部帶孔螺栓細桿B級 | Hexagon bolts with wire holes on head--Reduced shank--Product grade B |
| GB/T 32.3 | 六角頭頭部帶孔螺栓細牙A和B級 | Hexagon bolts with wire holes on head--Fine pitch thread--Product grade A and B |
| GB/T 3227 | 螺栓螺母用裝配工具 機動套筒工具的傳動四方 | () |
| GB/T 3228 | 螺栓螺母用裝配工具沖擊式機動四方傳動套筒的尺寸 | Assembly tools for screws and nuts--Machine-operated square drive sockets (“impact”)--Dimensions |
| GB/T 3229 | 螺栓螺母用裝配工具 手動和機動螺刀頭的傳動端和連接部件的尺寸及扭矩試驗 | () |
| GB/T 35 | 小方頭螺栓B級 | Square head bolts with small head--Product grade B |
| GB/T 3632 | 鋼結構用扭剪型高強度螺栓連接副 | () |
| GB/T 5277 | 緊固件螺栓和螺釘通孔 | Fasteners--Clearance holes for bolts and screws |
| GB/T 5286 | 螺栓、螺釘和螺母用平墊圈總方案 | Plain washers for bolts，screws and nuts--General plan |
| GB/T 5650 | 擴口式管接頭用空心螺栓 | () |
| GB/T 5779.1 | 緊固件表面缺陷螺栓、螺釘和螺柱一般要求 | Fasteners--Surface discontinuities--Bolts，screws and studs for general requirements |
| GB/T 5779.3 | 緊固件表面缺陷螺栓、螺釘和螺柱特殊要求 | Fasteners--Surface discontinuities--Bolts，screws and studs for special requirements |
| GB/T 5780 | 六角頭螺栓C級 | Hexagon head bolts--Product grade C |
| GB/T 5781 | 六角頭螺栓全螺紋C級 | Hexagon head bolts--Full thread--Product gradeC |
| GB/T 5782 | 六角頭螺栓 | Hexagon head bolts |
| GB/T 5783 | 六角頭螺栓全螺紋 | Hexagon head bolts--Full thread |
| GB/T 5784 | 六角頭螺栓細桿B級 | Hexagon head bolts--Reduced shank--Product gradeB |
| GB/T 5785 | 六角頭螺栓細牙 | Hexagon head bolts with fine pitch thread |
| GB/T 5786 | 六角頭螺栓細牙全螺紋 | Hexagon head bolts with fine pitch thread--Full thread |
| GB/T 5789 | 六角法蘭面螺栓加大系列B級 | Hexagon flange bolts--Heavy series--Product grade B |
| GB/T 5790 | 六角法蘭面螺栓加大系列細桿B級 | Hexagon flange bolts--Heavy series--Product grade B |
| GB/T 6188 | 螺栓和螺釘用內六角花形 | () |
| GB/T 7559 | 纖維增強塑料層合板螺栓連接擠壓強度試驗方法 | Test method for bearing strength by bolted joints of fiber reinforced plastics laminates |
| GB/T 794 | 加強半圓頭方頸螺栓 | Strengthened cap head square neck bolts |
| GB/T 798 | 活節螺栓 | Eye bolts |
| GB/T 799 | 地腳螺栓 | Eyelet bolts |
| GB/T 8 | 方頭螺栓C級 | Square head bolts--Product grade C |
| GB/T 800 | 沉頭雙榫螺栓 | Flat countersunk double nib bolts |
| GB/T 801 | 小半圓頭低方頸螺栓B級 | Cup head square neck bolts with small head andshort neck--Product grade B |
| GB/T 892 | 螺栓緊固軸端擋圈 | Lock rings at the end of shaft with bolt |
| GB/T 9074.1 | 螺栓或螺釘和平墊圈組合件 | Bolt or screw and washer assemblies with plain washers |
| GB/T 9074.11 | 十字槽凹穴六角頭螺栓和平墊圈組合件 | Cross recessed hexagon bolt with indentation and plain washer assemblies |
| GB/T 9074.12 | 十字槽凹穴六角頭螺栓和彈簧墊圈組合件 | Cross recessed hexagon bolt with indentation and single coil spring lock washer assemblies |
| GB/T 9074.13 | 十字槽凹穴六角頭螺栓，彈簧墊圈和平墊圈組合件 | Cross recessed hexagon bolt with indentation，single coil lock washer and plain washer assemblies |
| GB/T 9074.15 | 六角頭螺栓和彈簧墊圈組合件 | Hexagon head bolt and single coil spring lock washer assemblies |
| GB/T 9074.16 | 六角頭螺栓和外鋸齒鎖緊墊圈組合件 | Hexagon head bolt and serrated lock washer external teeth assemblies |
| GB/T 9074.17 | 六角頭螺栓， 彈簧墊圈和平墊圈組合件 | Hexagon head bolt，single coil spring lock washer and plain washer assemblies |
| HG/T 21545 | 地腳螺栓（錨栓）通用圖 | () |
| HG/T 21573 | 高壓螺栓和螺栓液壓上緊裝置 | () |
| JB/T 10660 | 無損檢測 鍛鋼材料超聲檢測 連桿螺栓的檢測 | Non destructive testing-Ultrasonic testing of forged steel materials-Testing of conneting red bolts |
| JB/T 1700 | 閥門零部件 螺母、螺栓和螺塞 | () |
| JB/T 2984.2 | 履帶式推土機 驅動輪齒塊用螺栓 | () |
| JB/T 3053 | 螺栓聯合自動機 基本參數 | () |
| JB/T 4209.1 | 冷鐓六角頭螺栓模具 初鐓沖頭 | () |
| JB/T 4209.10 | 冷鐓六角頭螺栓模具 標準桿凹模 A型 | () |
| JB/T 4209.11 | 冷鐓六角頭螺栓模具 標準桿凹模 B型 | () |
| JB/T 4209.12 | 冷鐓六角頭螺栓模具 切邊凹模 A型 | () |
| JB/T 4209.13 | 冷鐓六角頭螺栓模具 切邊凹模 B型 | () |
| JB/T 4209.2 | 冷鐓六角頭螺栓模具 終鐓沖頭 | () |
| JB/T 4209.3 | 冷鐓六角頭螺栓模具 切邊沖頭 | () |
| JB/T 4209.4 | 冷鐓六角頭螺栓模具 初鐓凹模 | () |
| JB/T 4209.5 | 冷鐓六角頭螺栓模具 細桿凹模 A型 | () |
| JB/T 4209.6 | 冷鐓六角頭螺栓模具 細桿凹模 B型 | () |
| JB/T 4209.7 | 冷鐓六角頭螺栓模具 全螺紋縮徑凹模 A型 | () |
| JB/T 4209.8 | 冷鐓六角頭螺栓模具 全螺紋縮徑凹模 B型 | () |
| JB/T 4209.9 | 冷鐓六角頭螺栓模具 全螺紋縮徑凹模 C型 | () |
| JB/T 5306 | 關節軸承 自潤滑球頭螺栓桿端關節軸承 外形尺寸和公差 | () |
| JB/T 5399 | 尼龍嵌件鎖緊螺栓、螺釘鎖緊部分 結構要素與鎖緊力矩 | () |
| JB/T 5932.5 | 履帶式推土機 履帶螺栓 | () |
| JB/T 6390 | 液力螺栓預緊器 | () |
| JB/T 6686 | 工程機械 螺栓擰緊力矩的檢驗方法 | () |
| JB/T 6688 | 推土機、鏟運機和平地機 刀片用螺栓 | () |
| JB/T 7293－2007 | 內燃機主軸承蓋 螺栓與螺母 技術條件 | Internal combustion engines -Main bearing lid bolts and nuts-Specification |
| JB/T 7983 | 普通磨具 螺栓緊固平形砂輪 | () |
| JB/T 8007.1 | 機床夾具零件及部件 球頭螺栓 | () |
| JB/T 8007.2 | 機床夾具零件及部件 T 型槽快卸螺栓 | () |
| JB/T 8007.3 | 機床夾具零件及部件 鉤形螺栓 | () |
| JB/T 8007.4 | 機床夾具零件及部件 雙頭螺栓 | () |
| JB/T 8007.5 | 機床夾具零件及部件 槽用螺栓 | () |
| JB/T 8025 | 機床夾具零件及部件 起重螺栓 | () |
| JB/T 8416 | 內燃機連桿螺栓 技術條件 | () |
| JB/T 8837 | 內燃機連桿螺栓 金相檢驗 | () |
| JB/T 9150 | 防松螺栓連接副 | () |
| JB/T 9151.1 | 緊固件測試方法 尺寸與幾何精度 螺栓、螺釘、螺柱和螺母 | () |
| JB/T 9743 | 內燃機 連桿螺栓 磁粉探傷技術條件 | () |
| JB/T 9765.1 | 內燃機 氣缸蓋螺栓 技術條件 | () |
| JB/T 9765.2 | 內燃機 飛輪螺栓 技術條件 | () |
| JB/T 999 | 管接頭用鉸接螺栓 | () |
| MT/T 187.1 | 刮板輸送機緊固件 螺栓技術條件 | () |
| MT/T 187.10 | 刮板輸送機緊固件 E型螺栓 | () |
| MT/T 187.2 | 刮板輸送機緊固件 U型螺栓 | () |
| MT/T 187.3 | 刮板輸送機緊固件 棱頭螺栓A型 | () |
| MT/T 187.4 | 刮板輸送機緊固件 棱頭螺栓B型 | () |
| MT/T 187.5 | 刮板輸送機緊固件 長方頭螺栓 | () |
| MT/T 187.6 | 刮板輸送機緊固件 梯形頭螺栓 | () |
| MT/T 187.7 | 刮板輸送機緊固件 半圓頭方頸螺栓 | () |
| QC/T 340-1999(2005) | 六角法蘭承面帶齒螺栓 | () |
| QC/T 517-1999(2005) | 汽車鋼板彈簧用U型螺栓及螺母技術條件 | () |
| QC/T 598-1999(2005) | 承面凸焊螺栓 | () |
| QC/T 599-1999(2005) | 端面凸焊螺栓 | () |
| QC/T 600-1999(2005) | 六角頭螺栓和錐形彈性墊圈的組合件 | () |
| YBJ 204-1991(2006年確認) | 輪式拖拉機輪轂螺栓、車輪螺釘和螺母 技術條件 | Wheeled tractor-Hub bolts,wheel screws and nuts-Specifications |
| YS/T 291-1994(2005) | 標準螺栓縮徑模具用硬質合金毛坯 | () |
| YS/T 293-1994(2005) | 標準螺栓墩粗模具用硬質合金毛坯 | () |
| 編號 | 中文名稱 | 英文名稱 |