微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ANSI E1.16 | 娛樂技術.金屬鹵素?zé)翩?zhèn)流器動力電纜的結構標準 | Entertainment Technology - Configuration Standard for Metal-Halide Ballast Power Cables |
| ANSI E1.27-1 | 娛樂業技術.用于ANSI E1.11 (DMX512-A)和USITT DMX512/1990產品的便攜式控制電纜的標準 | Entertainment Technology - Standard for Portable Control Cables for use with ANSI E1.11 (DMX512-A) and USITT DMX512/1990 Products |
| ANSI J-STD-042 | 電纜的應急警報信息 | Emergency Alert Message for Cable |
| ANSI T1.307 | 電信.防火標準.設備組件的可燃性要求以及電線和電纜的火焰?zhèn)鞑ヒ? | Telecommunications - Fire Resistance Criteria - Ignitability Requirements for Equipment Assemblies and Fire Spread Requirements for Wire and Cable |
| ANSI/AAMI EC53 | ECG電纜和導線 | ECG Cables and Wires |
| ANSI/AAMI EC53A | ECGA電纜和導線 | ECG Cables and Wires |
| ANSI/API SPEC17E | 水下臨時管道及電纜規范 | Specification for Subsea Umbilicals |
| ANSI/ASTM A523 | 高壓管型電纜線路用平端無縫與電阻焊鋼管規范 | Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits |
| ANSI/ASTM D1047 | 電線及電纜用聚氯乙烯套管規范(10.01) | Specification for Poly(Vinyl Cholride) Jacket for Wire and Cable (10.01) |
| ANSI/ASTM D1351 | 電線和電纜用熱塑性聚乙烯絕緣規范 | Specification for Thermoplastic Polyethylene Insulation for Electrical Wire and Cable |
| ANSI/ASTM D1523 | 工作溫度90℃的電線和電纜用合成橡膠絕緣規范(10.01) | Specification for Synthetic Rubber Insulation for Wire and Cable, 90°C Operations (10.01) |
| ANSI/ASTM D2219 | 工作溫度為60℃的聚氯乙烯電線和電纜絕緣規范(10.01) | Poly(Vinyl Chloride) Insulation for Wire and Cable, 60°C Operation, Specification for (10.01) |
| ANSI/ASTM D2220 | 工作溫度為75℃的聚氯乙烯電線和電纜絕緣規范(10.01) | Poly(Vinyl Chloride) Insulation for Wire and Cable, 75°C Operation, Specification for (10.01) |
| ANSI/ASTM D2308 | 電線和電纜用熱塑聚乙烯包裝物規范 | Specification for Thermoplastic Polyethylene Jacket for Electrical Wire and Cable |
| ANSI/ASTM D2633 | 電線和電纜用熱塑性絕緣體和護套測試方法 | Methods of Testing Thermoplastic Insulations and Jackets for Wire and Cable |
| ANSI/ASTM D2655 | 額定電壓達到2000伏的電線和電纜交聯聚乙烯絕緣材料規范(10.02) | Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 0 to 2000 V |
| ANSI/ASTM D2656 | 額定電壓2001V到35V的電線和電纜交聯聚乙烯絕緣材料規范(10.02) | Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 2001 to 35V (10.02) |
| ANSI/ASTM D2768 | 導線和電纜通用乙烯和丙烯橡膠套管規范(10.02) | Specification for General-Purpose Ethylene-Propylene Rubber Jacket for Wire and Cable (10.02) |
| ANSI/ASTM D2770 | 電線及電纜用耐臭氧乙丙橡膠整體絕緣材料及套管規范 | Specification for Ozone-Resisting Ethylene-Propylene Rubber Integral Insulation and Jacket for Wire and Cable |
| ANSI/ASTM D2802 | 電線和電纜用耐臭氧乙丙橡膠絕緣材料規范 | Specification for Ozone-Resistant Ethylene-Propylene Rubber Insulation for Wire and Cable |
| ANSI/ASTM D3485 | 預裝配導線和電纜用可盤繞光滑壁聚乙烯導管規范 | Specification for Smooth-Wall Coilable Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable |
| ANSI/ASTM D3554 | 電線和電纜用耐劃痕熱塑性高密度聚乙烯絕緣子規范 | Specification for Track-Resistant Black Thermoplastic High-Density Polyethylene Insulation for Wire and Cable |
| ANSI/ASTM D3555 | 電線和電纜用耐劃痕交叉連接熱塑性高密度聚乙烯絕緣子規范 | Specification for Track-Resistant Black Crosslinked Thermosetting Polyethylene Insulation for Wire and Cable |
| ANSI/ASTM D4244 | 重負載和超重負載丙烯腈丁二烯聚氯乙烯(NBR PVC)電線和電纜護套通用規范 | Specification for General-Purpose, Heavy-Duty and Extra-Heavy Duty Acrylonitrile-Butadiene Polyvinyl Chloride (NBR PVC) Jackets for Wire and Cable (10.02) |
| ANSI/ASTM D4245 | 工作溫度為90℃干/75℃濕的電線和電纜的耐臭氧熱塑性合成橡膠絕緣規范 | Specification for Ozone-Resistant Thermoplastic Elastomer Insulation for Wire and Cable 90oC Dry/75oC Wet Operation |
| ANSI/ASTM D4246 | 工作溫度為90℃的電線和電纜的耐臭氧熱塑性合成橡膠絕緣規范 | Specification for Ozone-Resistant Thermoplastic Elastomer Insulation for Wire and Cable, 90oC Operation |
| ANSI/ASTM D4313 | 電線及電纜用普通、重型及超重型交聯氯化聚乙烯套管規范 | Specification for General Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorinated Polyethylene Jackets for Wire and Cable |
| ANSI/ASTM D4314 | 普通重負載和超重負載交叉鏈環的氯磺化聚乙烯電線和電纜護套規范(10.02) | Specification for General Purpose Heavy-Duty and Extra-Heavy-Duty Crosslinked Chlorosulfonated Polyethylene Jackets for Wire and Cable (10.02) |
| ANSI/ASTM D4363 | 電線和電纜的熱塑氯化聚乙烯套管規范 | Specification for Thermoplastic Chlorinated Polyethylene Jacket for Wire and Cable |
| ANSI/ASTM D4565 | 遠程通信電線和電纜用絕緣體和套管物理和環境性能特性的試驗方法(10.02) | Test Methods for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable (10.02) |
| ANSI/ASTM D4566 | 遠程通信電線和電纜用絕緣體和套管電氣性能特性試驗方法(10.02) | Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable (10.02) |
| ANSI/ASTM D4568 | 評價電纜填充物、溢流元件、聚烯烴線和電纜材料相容性的試驗方法(10.02) | Test Methods for Evaluating Compatibility Between Cable Filling and Flooding Compounds and Polyolefin Cable Materials (10.02) |
| ANSI/ASTM D470 | 電線和電纜用交聯絕緣材料和護套的試驗方法(10.01) | Methods of Testing Crosslinked Insulations and Jackets for Wire and Cable (10.01) |
| ANSI/ASTM D4730 | 電信電線和電纜浸漬化合物規范 | Specification for Flooding Compounds for Telecommunications Wire and Cable |
| ANSI/ASTM D4731 | 電信電線和電纜用熱充填化合物規范 | Specification for Hot-Application Filling Compounds for Telecommunications Wire and Cable |
| ANSI/ASTM D4732 | 電信電線和電纜用冷充填化合物規范 | Specification for Cool-Application Filling Compounds for Telecommunications Wire and Cable |
| ANSI/ASTM D4872 | 電線和電纜填充化合物介電試驗的試驗方法 | Test Method for Dielectric Testing of Wire and Cable Filling Compounds |
| ANSI/ASTM D5424 | 在立式電纜槽中燃燒電纜引起的煙霧遮避性的試驗方法(10.02) | Test Method for Smoke Obscuration Caused by Burning Cables in a Vertical Configuration (10.02) |
| ANSI/ASTM D5537 | 電纜或光纜絕緣材料在立式電纜槽裝置中燃燒時熱發散、火焰?zhèn)鞑ズ唾|(zhì)量損失測試的試驗方法 | Test Method for Heat Release, Flame Spread and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration |
| ANSI/ASTM D6070 | 預組裝電線和電纜用光壁可盤繞聚乙烯(PE)管道物理特性試驗方法 | Test Methods for Physical Properties of Smooth-Wall, Coilable Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable |
| ANSI/ASTM D6096 | 工作溫度為90℃的電線和電纜聚氯乙烯絕緣體規范 | Specification for Poly(vinyl Chloride) Insulation for Wire and Cable, 90 C Operation |
| ANSI/ASTM D6113 | 使用錐形量熱計對電氣或光纖電纜含的絕緣材料的著火試驗反應特性進行測定的標準試驗方法 | Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables |
| ANSI/ASTM D866 | 電線及電纜用丁苯合成橡膠套規范 | Specification for Styrene-Butadiene (SBR) Synthetic Rubber Jacket for Wire and Cable (10.01) |
| ANSI/ASTM F1835 | 電纜連接設備導則 | Guide for Cable Splicing Installations |
| ANSI/ASTM F1837M | 熱縮電纜端口密封規范(米制) | Specification for Heat-Shrink Cable Entry Seals (Metric) |
| ANSI/ASTM F1883 | 用美國線規(AWG)或米制單位選擇電線和電纜規格的實施規程 | Practice for Selection of Wire and Cable Size, in AWG or Metric Units |
| ANSI/CEA 2030 | 多用室內音頻電纜標準 | Multi Room Audio Cabling Standard |
| ANSI/CEA 600.33 | 同軸電纜物理層和介質規范 | Coax Cable Physical Layer and Medium Specification |
| ANSI/EIA 364-101 | 電連接器、插孔和電纜組件或內連接系統的衰減試驗程序 | Attenuation Test Procedure for Electrical Connectors, Sockets and Cable Assemblies or Interconnection Systems |
| ANSI/EIA 364-102 | 電連接器、插孔、電纜組件或互連裝置的上升時間衰減試驗程序 | Rise Time Degradation Test Procedure for Electrical Connectors, Sockets, Cable Assemblies or Interconnection Systems |
| ANSI/EIA 364-107 | 電連接器，插孔，電纜組件或互連裝置的目測圖和跳動試驗程序 | Eye Pattern and Jitter Test Procedure for Electrical Connectors, Sockets, Cable Assemblies or Interconnection Systems |
| ANSI/EIA 364-108 | 電連接器、電纜組件或內連系統在適當?shù)臅r候和Frequency Domain 測量的阻抗、反射系數、回波損失和電壓柱波 | Impedance, Reflection Coefficient, Return Loss, and VSWR Test Procedure Measured in the Time and Frequency Domain for Electrical Connectors, Cable Assemblies or Interconnection Systems |
| ANSI/EIA 364-38B | 電連接器.電纜拔出試驗 | Electric Connectors - Cable Pull-Out Test |
| ANSI/EIA 364-41A | 電連接器.圓形護套電纜彎曲試驗程序 | Electric Connectors - Circular Jacket Cable Flexing Test Procedure |
| ANSI/EIA 364-41C | 電連接器的TP-41型電纜撓曲試驗程序 | TP-41 Cable Flexing Test Procedure for Electrical Connectors |
| ANSI/EIA 364-43B | 電連接器的電纜夾緊(彎矩)試驗程序 | Cable Clamping (Bending Moment) Test Procedure for Electrical Connectors |
| ANSI/EIA 403-A | 公共天線電視設備用75歐姆精密同軸電纜連接器 | Precision Coaxial Connectors for CATV Application (75 Ohms) |
| ANSI/EIA 429 | 扁平電纜連接器的一般標準 | Connectors, Electrical Flat Cable Type, General Specification for |
| ANSI/EIA 600.33 | 共軸電纜物理層和介質規范 | Coax Cable Physical Layer and Medium Specification |
| ANSI/EIA 700AOAE | 使用單連接器固定的1.27mm間距雙排的具有不可移動的帶式電纜接觸的錐形連接件的詳細規范 | Detail Specification for Trapezoidal Connectors with Non-Removable Ribbon Cable Contacts on 1.27 mm Pitch Double Row Used with Single Connector Attachments (SCA2) |
| ANSI/EIA 700AOAF | 用于非常高密度電纜連接的0.8mm間距的錐形屏蔽連接器的詳細規范 | Detail Specification for Trapezoidal Shielded Connector 0.8 mm Pitch Used with Very High Density Cable Interconnect (VHDCI) |
| ANSI/EIA-364-101 | 電連接器、插座、電纜附件或互連系統衰減試驗程序 | Attenuation Test Procedure for Electrical Connectors, Sockets and Cable Assemblies or Interconnection Systems |
| ANSI/EIA-364-102 | 電連接器、插座、電纜附件或互連系統上升時間降低試驗程序 | Rise Time Degradation Test Procedure for Electrical Connectors, Sockets, Cable Assemblies or Interconnection Systems |
| ANSI/EIA-364-103 | 電連接器、插座、電纜附件或互連系統傳播延遲試驗程序 | Propogation Delay Test Procedure for Electrical Connectors, Sockets, Cable Assemblies or Interconnection Systems |
| ANSI/EIA-364-107 | 電連接器、插座、電纜組件或互連系統的眼孔圖樣和不穩定性試驗程序 | Eye Pattern and Jitter Test Procedure for Electrical Connectors, Sockets, Cable Assemblies or Interconnection Systems |
| ANSI/EIA-364-108 | 電連接器、電纜附件或互連系統在時間和頻率域中測量的阻抗、反射系數、回程損耗和VSWR試驗程序 | Impedance, Reflection Coefficient, Return Loss, and VSWR Test Procedure Measured in the Time and Frequency Domain for Electrical Connectors, Cable Assemblies or Interconnection Systems |
| ANSI/EIA-364-38B | 電連接器.電纜拔出試驗 | Cable Pull-Out Test Procedure for Electrical Connectors |
| ANSI/EIA-364-41C | 電連接器TP-41電纜撓曲試驗程序 | TP-41 Cable Flexing Test Procedure for Electrical Connectors |
| ANSI/EIA-364-43B | 電連接器.電纜夾緊(彎曲瞬間)試驗程序 | Cable Clamping (Bending Moment) Test Procedure for Electrical Connectors |
| ANSI/EIA-700AOAE | 單個連接器連接用、間距為1.27mm、帶狀電纜、雙排不可拆卸觸點的梯形連接器的詳細規范(SCA2) | Detail Specification for Trapezoidal Connectors with Non-Removable Ribbon Cable Contacts on 1.27 mm Pitch Double Row Used with Single Connector Attachments (SCA2) |
| ANSI/EIA-700AOAF | 極高密度電纜互連用間距0.8mm梯形屏蔽連接器的詳細規范 | Detail Specification for Trapezoidal Shielded Connector 0.8 mm Pitch Used with Very High Density Cable Interconnect (VHDCI) |
| ANSI/EIA/TIA -455-104A | 纖維光學電纜的循環彎曲試驗 | Fiber Optic Cable Cyclic Flexing Test |
| ANSI/EIA/TIA 455-6B | 光纜互連裝置的電纜固著力的測試規程 | Cable Retention Test Procedure for Fiber Optic Cable Interconnecting Devices |
| ANSI/EIA/TIA-455-37 | 纖維光學電纜高低溫的彎曲試驗 | Fiber Optic Cable Bend Test, Low and High Temperature |
| ANSI/ICEA P-54-440 | 安裝在電纜管道中的電纜的載流量 | Ampacities of Cables Installed in Cable Trays |
| ANSI/ICEA S-101-699 | 一般用途非局域網電信布線系統用3類非屏蔽雙絞線室內電纜的技術要求 | Category 3 Individually Unshielded Twisted Pair Indoor Cable For Use In General Purpose Non-LAN Telecommunications Wiring Systems Technical Requirements |
| ANSI/ICEA S-103-701 | 上升電纜 | Riser Cable |
| ANSI/ICEA S-105-692 | 600伏特單層熱固性絕緣公用地下配電電纜 | 600 Volt Single Layer Thermoset Insulated Utility Underground Distribution Cables |
| ANSI/ICEA S-108-720 | 額定電壓46至345KV的擠壓絕緣電力電纜的標準 | Standard for Extruded Insulation Power Cables Rated Above 46 through 345 KV |
| ANSI/ICEA S-532 | 控制電纜、熱電偶軟線和儀器儀表用電纜 | Control, Thermocouple Extension and Instrumentation Cables |
| ANSI/ICEA S-70-547 | 抗風化聚烯烴包覆電線和電纜 | Weather-Resistant Polyolefin-Covered Wire and Cable |
| ANSI/ICEA S-76-474 | 中性線支撐的額定值600伏特的抗風化擠制絕緣電力電纜組件 | Neutral-Supported Power Cable Assemblies with Weather-Resistant Extruded Insulation Rated 600 Volts |
| ANSI/ICEA S-80-576 | 在遠程通信布線系統技術要求中使用的1 & 2 類分別無屏蔽雙絞室內電纜(有或無全屏蔽) | Category 1 & 2 Individually Unshielded Twisted Pair Indoor Cables (With or Without an Overall Shield) for Use in Communications Wiring Systems Technical Requirements |
| ANSI/ICEA S-81-570 | 加固設計的600伏特電纜標準 | Standard for 600 Volt Cables of Ruggedized Design |
| ANSI/ICEA S-84-608 | 聚烯烴絕緣填充銅導線通信電纜的技術要求 | Telecommunications Cable Filled, Polyolefin Insulated, Copper Conductor - Technical Requirements |
| ANSI/ICEA S-85-625 | 空芯聚烯烴絕緣銅導體通信電纜的技術要求 | Aircore, Polyolefin Insulated, Copper Conductor Telecommunications Cable - Technical Requirements |
| ANSI/ICEA S-86-634 | 通信電纜直埋配電和服務線.技術要求 | Telecommunications Cable Buried Distribution and Service Wire - Technical Requirements |
| ANSI/ICEA S-87-640 | 室外光纖通信電纜 | Optical Fiber Outside Plant Communications Cable |
| ANSI/ICEA S-90-661 | 通信配線系統中使用的獨立無屏蔽室內絞線對電纜.技術要求 | Individually Unshielded Twisted Pair Indoor Cables for Use In Communication Wiring Systems - Technical Requirements |
| ANSI/ICEA S-94-649 | 額定值5000-46000伏特的同軸中性電纜 | Concentric Neutral Cables Rated 5,000-46,000 Volts |
| ANSI/ICEA S-97-682 | 額定電壓5000-46,000伏有保護設施的電力電纜 | Utility Shielded Power Cables Rated 5000 - 46,000 Volts |
| ANSI/ICEA S-98-688 | 聚烯烴絕緣銅導線寬頻雙扭線電纜空心 | Broadband Twisted Pair Cable Aircore, Polyolefin Insulated, Copper Conductor |
| ANSI/ICEA S-99-689 | 聚烯烴絕緣填充銅導線寬頻雙扭線電纜 | Broadband Twisted Pair Cable Filled, Polyolefin Insulated, Copper Conductor |
| ANSI/ICEA T-26-465 | 試驗用壓模絕緣體電纜、控制電纜、測量儀器電纜和輕便電纜頻繁取樣的指南 | Guide for Frequency of Sampling Extruded Dielectric Power, Control, Instrumentation, and Portable Cables for Test |
| ANSI/IEEE 1017 | 潛水電泵電纜的現場試驗推薦規范 | Recommended Practice for Field Testing Electric Submersible Pump Cable |
| ANSI/IEEE 1018 | 規定潛水電泵電纜用推薦規程.乙烯-丙烯橡膠絕緣 | Recommended Practice for Specifying Electric Submersible Pump Cable - Ethylene-Propylene Rubber Insulation |
| ANSI/IEEE 1019 | 規定潛水電泵電纜用推薦規程.聚丙烯絕緣 | Recommended Practice for Specifying Electric Submersible Pump Cable - Polypropylene Insulation |
| ANSI/IEEE 1073.3.2 | 醫療裝置通信.傳輸輪廓.以IrDA為基的連接電纜 | Medical Device Communications - Transport Profile - IrDA Based - Cable Connected |
| ANSI/IEEE 1120 | 海底電力和通信電纜的規劃、設計和安裝中所考慮因素的指南 | Guide to the Factors to Be Considered in Planning, Design, and Installation of Submarine Power and Communication Cable |
| ANSI/IEEE 1143 | 低壓電纜屏蔽實施指南 | Guide on Shielding Practice for Low Voltage Cables |
| ANSI/IEEE 1185 | 發電站電纜的安裝方法指南 | Guide for Installation Methods for Generating Station Cables |
| ANSI/IEEE 1202 | 工業和商業中走線架內用電纜的燃燒試驗 | Flame Testing of Cables for Use in Cable Tray in Industrial and Commercial Occupancies |
| ANSI/IEEE 1210 | 使用電線和電纜測定電纜潤滑劑可混用性的標準試驗 | Standard Tests for Determining Compatibility of Cable Lubricants with Wire and Cable |
| ANSI/IEEE 1235 | 地下電力電纜和管道用可識別護套的特性指南 | Guide for the Properties of Identifiable Jackets for Underground Power Cables and Ducts |
| ANSI/IEEE 1242 | 石油和化學工廠的電源、控制和專用電纜的詳細規定和選擇指南 | Guide for Specifying and Selecting Power, Control and Special Purpose Cable for Petroleum and Chemical Plants |
| ANSI/IEEE 1299/C62.22.1 | 保護絕緣屏蔽電力電纜系統的電涌放電器的連接指南 | Guide for the Connection of Surge Arresters to Protect Insulated, Shielded Electric Power Cable Systems |
| ANSI/IEEE 1300 | 氣體絕緣主配電裝置的電纜連接指南 | Guide for Cable Connections for Gas Insulated Substations |
| ANSI/IEEE 1425 | 浸漬紙絕緣傳輸電纜系統的剩余使用壽命的評價指南 | Guide for the Evaluation of the Remaining Life of Impregnated Paper Insulated Transmission Cable Systems |
| ANSI/IEEE 1511 | 額定電壓為5kV至46 kV的系統上電力電纜、接頭和終端故障的調查和分析指南 | Guide for Investigating and Analyzing Power Cable, Joint, and Termination Failures on Systems Rated 5kV Through 46 kV |
| ANSI/IEEE 383 | 核電站1E級電纜質量鑒定和現場拼接標準 | Standard for Qualifying Class 1E Electric Cables and Field Splices for Nuclear Power Generating Stations |
| ANSI/IEEE 400 | 電力電纜系統現場進行直流高壓試驗的指南 | Direct Voltage Tests on Power Cables in the Field, Guide for Making |
| ANSI/IEEE 400.2 | 使用超低頻(VLF)的屏蔽電力電纜系統的現場試驗指南 | Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF) |
| ANSI/IEEE 404 | 額定電壓為5000-138000V的擠壓介質電纜接頭和額定電壓2500V-500000V的層壓介質電纜接頭 | Cable Joints for Use with Extruded Dielectric Cable Rated 5 000 - 138 000 V and Cable Joints for Use with Laminated Dielectric Cable Rated 2 500-500 000 V |
| ANSI/IEEE 48 | 高壓交流電纜終端的標準試驗程序和要求 | Standard Test Procedures and Requirements for High-Voltage Alternating-Current Cable Terminations |
| ANSI/IEEE 515 | 工業用電阻熱示蹤的電纜熱試驗、設計、安裝和維護的推薦實施規程 | Cables, Heating-Testing, Design, Installation, and Maintenance of Electrical Resistance Heat Tracing for Industrial Applications, Recommended Practice for |
| ANSI/IEEE 525 | 變電站電纜系統的設計和安裝 | Design and Installation of Cable Systems in Substations |
| ANSI/IEEE 576 | 工業和商業用絕緣電力電纜的安裝、端接和檢測的推薦實施規程 | Recommended Practice for Installation, Termination, and Testing of Insulated Power Cable as Used in Industrial and Commercial Applications |
| ANSI/IEEE 628 | 核電站1E級電路電纜管道系統的設計、安裝和合格鑒定的標準 | Raceway Systems for Class 1E Circuits for Nuclear Power Generating Stations, Criteria for the Design, Installation, and Qualification of |
| ANSI/IEEE 634 | 電纜防火鑒定試驗標準 | Standard for Cable Penetration Fire Stop Qualification Test |
| ANSI/IEEE 635 | 電力電纜鋁護套的選擇和設計指南 | Guide for Selection and Design of Aluminum Sheaths for Power Cables |
| ANSI/IEEE 690 | 核電站1E級電路用電纜系統的設計和安裝 | Design and Installation of Cable Systems for Class 1E Circuits in Nuclear Power Generating Stations |
| ANSI/IEEE 835 | 電力電纜的載流量表 | Power Cable Ampacity Tables |
| ANSI/IEEE 848 | 防火電纜載流量額定降低測量定的標準程序 | Standard Procedure for the Determination of the Ampacity Derating of Fire Protected Cables |
| ANSI/IEEE C37.20.1a | 金屬殼密封的低壓電力線路斷路器開關設備標準.修改1:短時間和短路可耐電流測試;多電纜連接的最小區域 | Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear - Amendment 1: Short-Time and Short-Circuit Withstand Current Tests; Minimum Areas for Multiple Cable Connections |
| ANSI/IPC WHMA-A-620 | 電纜和導線護皮組件的要求和驗收 | Requirements and Acceptance for Cable and Wire Harness Asssemblies |
| ANSI/NECA 104 | 安裝鋁建筑電線和電纜的推薦規程 | Recommended Practice for Installing Aluminum Building Wire and Cable |
| ANSI/NECA 120 | 安裝鎧裝電纜(AC型)和金屬包覆電纜(MC型)標準 | Standard for Installing Armored Cable (Type AC) and Metal Clad Cable (Type MC) |
| ANSI/NECA 600 | 中壓電纜安裝推薦實施規程 | Recommended Practice for Installing Medium Voltage Cable |
| ANSI/NEMA FB-1 | 導線管和電纜組件的連接件、鑄造金屬箱和導線管體 | Fittings, Cast Metal Boxes, and Conduit Bodies for Conduit and Cable Assemblies |
| ANSI/NEMA VE1 | 金屬電纜托架系統 | Metal Cable Tray Systems |
| ANSI/NEMA VE2 | 金屬電纜板安裝導則 | Metal Cable Tray Installation Guidelines |
| ANSI/NEMA WC27500 | 航空航天和工業用電纜 | Aerospace and Industrial Electric Cable |
| ANSI/NEMA WC53 | 試驗用擠壓介電功率、控制、儀器儀表和輕便電纜的標準試驗方法 | Standard Test Methods for Extruded Dielectric Power, Control, Instrumentation, and Portable Cables for Test |
| ANSI/NEMA WC57 | 控制電纜、熱電偶鉆延長電纜和儀器電纜 | Control, Thermocouple Extension and Instrumentation Cables |
| ANSI/NEMA WC63.2 | 建筑物內數據同軸通信電纜的性能標準 | Performance Standard for Coaxial Premise Data Communications Cables |
| ANSI/NEMA WC66 | 6類和7類100歐姆屏蔽和非屏蔽雙股電纜性能標準 | Performance Standard for Category 6 and Category 7 100 Ohm Shielded and Unshielded Twisted Pair Cables |
| ANSI/NEMA WC70 | 額定配電電壓 2000V或更低的無屏蔽電力電纜 | Nonshielded Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy |
| ANSI/NEMA WC71 | 額定電壓為2001-5000V 的無屏蔽配電電纜 | Nonshielded Cables Rated 2001-5000 Volts for Use in the Distribution of Electric Energy |
| ANSI/NEMA WC74 | 5-46KV電能輸送屏蔽電源電纜 | 5-46kV Shielded Power Cable for Use in the Transmission and Distribution of Electric Energy |
| ANSI/NFPA 262 | 電線和電纜的著火和煙霧特征試驗 | Standard Method of Test for Flame Travel and Smoke of Wires and Cables for Use in Air-Handling Spaces |
| ANSI/SAE J1067 | 七芯導線電纜 | Seven-Conductor Cable |
| ANSI/SAE J1494 | 蓄電池升壓器電纜 | Battery Booster Cables |
| ANSI/SAE J2394 | ABS動力用7導體電纜 | Seven-Conductor Cable for ABS Power |
| ANSI/SAE J560 | 卡車掛車跨接電纜用7芯電纜連接器 | Seven Conductor Electrical Connector for Truck-Trailer Jumper Cables |
| ANSI/SCTE 03 | 同軸電纜結構回波損耗試驗方法 | Test Method for Coaxial Cable Structural Return Loss |
| ANSI/SCTE 10 | 柔性同軸電纜沖擊試驗方法 | Test Method for Flexible Coaxial Cable Impact Test |
| ANSI/SCTE 100 | 75 Ohm平滑鋁制用戶接入電纜規范 | Specification for 75 Ohm Smooth Aluminum Subscriber Access Cable |
| ANSI/SCTE 102 | 中繼和配電連接器的電纜保持力測試 | Cable Retention Force Testing of Trunk & Distribution Connectors |
| ANSI/SCTE 103 | F連接器和F81筒的分接電纜的直流接觸電阻的試驗方法 | Test Method for DC Contact Resistance, Drop cable to F-Connectors and F81 Barrels |
| ANSI/SCTE 105 | 數字電纜的單向接收設備標準 | Uni-Directional Receiving Device Standard for Digital Cable |
| ANSI/SCTE 107 | 嵌入式電纜調制解調器裝置規范 | Embedded Cable Modem Device Specification |
| ANSI/SCTE 11 | 架空電纜防腐蝕變形的試驗方法 | Test Method for Aerial Cable Corrosion Protection Flow |
| ANSI/SCTE 12 | 干線、饋電和配電同軸電纜中間導線與絕緣材料的粘接 | Center Conductor Bond to Dielectric for Trunk, Feeder and Distribution Coaxial Cables |
| ANSI/SCTE 13 | 干線、饋電和配電同軸電纜用絕緣材料漏汽試驗方法 | Dielectric Air Leakage Test Method For Trunk, Feeder and Distribution Coaxial Cable |
| ANSI/SCTE 15 | 中繼、饋電和配電同軸電纜的規范 | Specification for Trunk, Feeder, and Distribution Coaxial Cable |
| ANSI/SCTE 21 | 國家電視系統委員會(NTSC)在電纜數字傳輸數據流中的垂直閃爍間隔(VBI)數據的輸送 | Carriage of National Television System Committee (NTSC) Vertical Blinking Interval (VBI) Data in Cable Digital Transport Streams |
| ANSI/SCTE 24-18 | IP電纜通信CMS到CMS信令 | IPCablecom CMS to CMS Signaling |
| ANSI/SCTE 24-20 | IPC電纜通訊網絡的優先通信要求 | Requirements for Preferential Telecommunications over IPCablecom Networks |
| ANSI/SCTE 25-1 | 混合光導纖維/同軸電纜廠外狀態監測.物理層 | Hybrid Fiber/Coax Outside Plant Status Monitoring - Physical (PHY) Layer |
| ANSI/SCTE 25-2 | 混合光導纖維/同軸電纜廠外狀態監測.中速存取控制(MAC)層 | Hybrid Fiber/Coax Outside Plant Status Monitoring - Media Access Control (MAC) Layer |
| ANSI/SCTE 25-3 | 混合光纖/同軸電纜室外狀態監視.第3部分:PS到T的應答器SCTE子代碼 | Hybrid Fiber/Coax Outside Plant Status Monitoring Part 3: - PS to T Interface SCTE Subcommittee Code: HMS 022 |
| ANSI/SCTE 25-4 | 混合光纖/同軸電纜室外狀態監視.第4部分:發射機應答器接口驗收試驗用HMS電源 | Hybrid Fiber/Coax Outside Plant Status Monitoring Part 4: HMS Power Supply to Transponder Interface Acceptance Test |
| ANSI/SCTE 27 | 對廣播電纜附加說明的方法 | Subtitling Methods for Broadcast Cable |
| ANSI/SCTE 33 | 引入電纜的尺寸 | Diameter of Drop Cable |
| ANSI/SCTE 35 | 電纜傳輸?shù)臄?shù)字程序插入式字幕 | Digital Program Insertion Cueing Message for Cable |
| ANSI/SCTE 37 | 混合光纖/同軸電纜外部設備狀態監視SCTE-HMS-ROOT管理信息庫(MIB)定義 | Hybrid Fiber/Coax Outside Plant Status Monitoring SCTE-HMS-ROOT Management Information Base (MIB) Definition |
| ANSI/SCTE 38-2 | 混合光纖/同軸電纜廠外狀態監視SCTE-HMS-DOWNLOAD-MIB管理信息庫(MIB)定義 | Hybrid Fiber Coax/Outside Plant Status Monitoring SCTE-HMS-ALARMS-MIB Management Information Base (MIB) |
| ANSI/SCTE 38-3 | 混合光纖/同軸電纜廠外狀態監視SCTE-HMS-COMMON-MIB管理信息庫(MIB) | Hybrid Fiber Coax/Outside Plant Status Monitoring SCTE-HMS-COMMON-MIB Management Information Base (MIB) |
| ANSI/SCTE 38-4 | 混合光纖/同軸電纜廠外狀態監視SCTE-HMS-PS-MIB管理信息庫(MIB) | Hybrid Fiber Coax/Outside Plant Status Monitoring SCTE-HMS-PS-MIB Management Information Base (MIB) |
| ANSI/SCTE 38-5 | 混合光纖/同軸電纜廠外狀態監視SCTE-HMES-FIBERNOTE-MIB管理信息基地 | Hybrid Fiber/Coax Outside Plant Status Monitoring SCTE-HMS-FIBERNODE-MIB Management Information Base |
| ANSI/SCTE 38-7 | 混合光纖/同軸電纜廠外狀態監視SCTE-HMS轉發器接口總線(TIB)-MIB管理信息庫(MIB) 定義 | Hybrid Fiber/Coax Outside Plant Status Monitoring SCTE-HMS-Transponder Interface Bus (TIB)-MIB Management Information Base (MIB) Definition |
| ANSI/SCTE 38-8 | 混合光纖/同軸電纜廠外狀態監視SCTE-HMS-DOWNLOAD-MIB管理信息庫(MIB)定義 | Hybrid Fiber/Coax Outside Plant Status Monitoring SCTE-HMS-DOWNLOAD-MIB Management Information Base (MIB) Definition |
| ANSI/SCTE 39 | 共軸總線、饋電線和配線電纜用靜態最小彎曲半徑的試驗方法 | Test Method for Static Minimum Bending Radius for Coaxial Trunk, Feeder, and Distribution Cables |
| ANSI/SCTE 40 | 數字電纜網絡接口規范 | Digital Cable Network Interface Specification |
| ANSI/SCTE 48-2 | 用H-P磁性相臨場探測法測量有源和無源同軸電纜設備相關屏蔽性能的試驗規程 | Test Procedure for Measuring Relative Shielding Properties of Active and Passive Coaxial Cable Devices Using H-P Magnetic Close Field Probe |
| ANSI/SCTE 48-3 | 用GTEM電池測量編織同軸引入電纜的屏蔽效果的試驗規程 | Test Procedure for Measuring Shielding Effectiveness of Braided Coaxial Drop Cable Using the GTEM Cell |
| ANSI/SCTE 50 | 同軸電纜阻抗規則性測量的試驗程序 | Test Procedure for Measuring Regularity of Impendance of Coaxial Cable |
| ANSI/SCTE 51 | 測定分接電纜編織層覆蓋率的試驗方法 | Test Method for Determining Drop Cable Braid Coverage |
| ANSI/SCTE 57 | 電纜和MMDS用數字電視的衛星分布系統信息 | System Information for Satellite Distribution of Digital Television for Cable and MMDS |
| ANSI/SCTE 66 | 同軸電纜阻抗的試驗方法 | Test Method for Coaxial Cable Impedance |
| ANSI/SCTE 71 | 75ohm編織、同軸、多用途電纜規范 | Specification for Braided, 75 ohm, Coaxial, Multi-Purpose Cable |
| ANSI/SCTE 72 | 分接電纜/連接器接口的軸向負荷溫度循環試驗方法 | Test Method for Axial Load Temperature Cycling of Drop Cable/Connector Interface |
| ANSI/SCTE 73 | 連接器對分接電纜接口的插入力的測試方法 | Test Method for Insertion Force of Connector to Drop Cable Interface |
| ANSI/SCTE 74 | 75 Ohm射頻同軸分接編織軟電纜規范 | Specification for Braided 75 Ohm Flexible RF Coaxial Drop Cable |
| ANSI/SCTE 87-1 | 電纜電信用圖形符號.第1部分:HFC符號 | Graphic Symbols for Cable Telecommunications - Part 1: HFC Symbols |
| ANSI/SCTE 89-1 | IPCable2J家用標準.第1部分:家用電纜網絡1.0 | IPCable2Home Standard Part 1: Cable Home Networking 1.0 |
| ANSI/SCTE 89-2 | IPCable2家用標準.第2部分.家用電纜網絡1.1 | IPCable2Home Standard Part 2 - Cable Home Networking 1.1 |
| ANSI/SCTE 96 | 電纜通信檢驗指南 | Cable Telecommunications Testing Guidelines |
| ANSI/SCTE 97 | 電纜網絡中視頻需求用元數據要求 | Metadata Requirements for Video-On-Demand in Cable Networks |
| ANSI/SCTE 99 | 軸拉連接器/用戶引入電纜的試驗方法 | Test Method For Axial Pull Connector/Drop Cable |
| ANSI/SCTE TP007 | 同軸電纜結構回波損耗試驗方法 | Test Method for Coaxial Cable Structural Return Loss |
| ANSI/SMPTE 276M | 電視.通過共軸電纜的AES/EBU 數字音頻信號傳輸 | Television - Transmission of AES/EBU Digital Audio Signals Over Coaxial Cable |
| ANSI/TIA-455-162A | 光纖電纜的溫度和濕度循環試驗 | Fiber Optic Cable Temperature-Humidity Cycling |
| ANSI/TIA-455-171-A | 交替測量法進行短長度的多模漸變折射率光纖電纜和單模光纖電纜組件衰減量的測量 | Attenuation by Substitution Measurement for Short-Length Multimode Graded-Index and Single Mode Optical Fiber Cable Assemblies |
| ANSI/TIA-455-1B | 光纖互連設備用軟電纜 | Cable Flexing for Fiber Optic Interconnecting Devices |
| ANSI/TIA-455-41A | 光纖電纜的抗壓力負荷性能 | Compressive Loading Resistance of Fiber Optic Cable |
| ANSI/TIA-455-80-C | 用傳輸功率測量未用電纜固定的單模光纖的截止波長 | Measuring Cutoff Wavelength of Uncabled Single-Mode Fiber by Transmitted Power |
| ANSI/TIA-455-81-B | 填充式光纖電纜的復合流體(滴)試驗 | Compound Flow (Drip) Test for Filled Fiber Optic Cable |
| ANSI/TIA-455-84B | 光纖電纜的護套自粘合(封合) | Jacket Self-Adhesion (Blocking) for Fiber Optic Cable |
| ANSI/TIA-455-87B | 光纖電纜的打結試驗 | Knot Test for Fiber Optic Cable |
| ANSI/TIA-455-89B | 光纖電纜護套的延伸率和抗拉強度 | Jacket Elongation and Tensile Strength for Fiber Optic Cable |
| ANSI/TIA-568 -B.2-9-200x | 商用建筑電信電纜敷設標準.第2部分：平衡雙絞線電纜組件.補充件9.附加分類6平衡要求和測量過程 | Commercial Building Telecommunications Cabling Standard - Part 2: - Balanced Twisted-Pair Cabling Components - Addendum 9 - Additional Category 6 Balance Requirements and Mesurement Procedures |
| ANSI/TIA-568-B-3-1 | 光纖電纜敷設元件標準.補充件1.50/125um光纖電纜的附加傳輸性能規范 | Optical Fiber Cabling Components Standard - Addendum 1 - Additional Transmission Performance Specifications for 50/125 um Optical Fiber Cables |
| ANSI/TIA-568-B-3 | 4對100歐姆第5類敷設電纜的傳輸性能規范 | Transmission Performance Specifications for 4-pair 100 Ohm Category 5 Cabling |
| ANSI/TIA-568-B.1-1 | 商用建筑電信電纜敷設標準.第1部分:一般要求.補充件1.4對UTP和4對ScTP插塞式電纜的最小彎曲半徑 | Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 1 - Minimum 4-Pair UTP and 4-Pair ScTP Patch Cable Bend Radius |
| ANSI/TIA-568-B.1-2 | 商用建筑電信電纜敷設標準.第1部分:一般要求.補充件2.屏蔽電纜水平敷設的接地和連接規范 | Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 2 - Grounding and Bonding Specifications for Screened Horizontal Cabling |
| ANSI/TIA-568-B.1 | 商用建筑電信電纜敷設標準 | Commercial Building Telecommunications Cabling Standard |
| ANSI/TIA-568-B.1-3 | 商用建筑電信電纜敷設標準.第1部分:一般要求.補充件3.根據纖維類型決定的光纖設備的可支持距離和信道衰減 | Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 3 - Supportable Distances and Channel Attenuation for Optical Fiber Applications by Fiber Type |
| ANSI/TIA-568-B.1-4 | 商用建筑電信電纜敷設標準.第1部分:一般要求.補充件4. 第6類850nm激光優選的50/125微米多模纖維的鑒別 | Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 4 - Recognition of Category 6 and 850 nm laser-Optimized 50/125 Micron Multi-mode Fiber |
| ANSI/TIA-568-B.1-5 | 商業建筑物電信電纜連接標準.第1部分:一般要求.附錄5:電信附件用電信電纜連接 | Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 5 - Telecommunications Cabling for Telecommunications Enclosures |
| ANSI/TIA-568-B.2-1 | 商用建筑電信電纜敷設標準.第2部分:對稱雙絞合線部件.補充件1.4對100歐姆的第6類敷設電纜的傳輸性能規范 | Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted Pair Components - Addendum 1 - Transmission Performance Specifications for 4-Pair 100 Ohm Category 6 Cabling |
| ANSI/TIA-568-B.2-11 | 商用建筑電信電纜敷設標準.第2部分:平衡雙絞線電纜組件.補充件11.增加4對UTP和ScTP電纜直徑的規范 | Commercial Building Telecommunications Cabling Standard - Part2: Balanced Twisted-Pair Cabling Components - Addendum 11: Specification for Increased Diameter of 4-Pair UTP and ScTP Cables |
| ANSI/TIA-568-B.2-2 | 商用建筑電信電纜敷設標準.第2部分:對稱雙絞合線電纜敷設 | Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted-Pair Cabling |
| ANSI/TIA-568-B.2 | 商用建筑電信電纜敷設標準.第2部分:平衡絞合的成對電纜敷設 | Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted-Pair Cabling |
| ANSI/TIA-568-B.2-3 | 商用建筑電信電纜敷設標準.第2部分:對稱雙絞合線電纜敷設.補充件3.插入損耗和回波損耗通過/失效確定的附加 | Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted-Pair Cabling - Addendum 3 - Additional Considerations for Insertion Loss and Return Loss Pass/Fail Determination |
| ANSI/TIA-568-B.2-4 | 商用建筑電信電纜敷設標準.第2部分:對稱雙絞合線電纜敷設.補充件4.銅制連接硬件的無釬焊連接的可靠性要求 | Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted Pair Cabling Components - Addendum 4 - Solderless Connection Reliability Requirements for Copper Connecting Hardware |
| ANSI/TIA-568-B.2-5 | 商用建筑電信電纜敷設標準.第2部分:對稱雙絞線電纜敷設元件.附錄5 | Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted Pair Cabling Components - Addendum 5 |
| ANSI/TIA-568-B.2-6 | 商用建筑物電信電纜敷設標準.第2部分:對稱雙絞電路敷設元件.補充件6:6類相關元件試驗方法 | Commercial Building Telecommunicatins Cabling Standard - Part 2: Balanced Twisted-Pair Cabling Components - Addendum 6 - Category 6 Related Component Test Procedures |
| ANSI/TIA-758-1 | 用戶持有的外部設備遠程通信電纜敷設 | Customer-Owned Outside Plant Telecommunications Cabling |
| ANSI/TIA-758-A | 客戶擁用的外部設備電信電纜連接 | Customer-Owned Outside Plant Telecommunications Cabling |
| ANSI/TIA-854 | 使用第6類對稱雙絞合線電纜實現1000Mb/s(1000BASE-TX)的全雙工"以太網"物理層規范 | A Full Duplex Ethernet Physical Layer Specification for 1000Mb/s (1000BASE-TX) Operating Over Category 6 Balanced Twisted Pair Cabling |
| ANSI/TIA-862 | 商用建筑物的建筑自動化系統的電纜敷設標準 | Building Automation Systems Cabling Standard for Commercial Buildings |
| ANSI/TIA/EIA 455-11C | 光纖元件和電纜的振動試驗規程 | Vibration Test Procedure for Fiber Optic Components and Cables |
| ANSI/TIA/EIA 455-1B | 光纖互連裝置的電纜撓曲試驗 | Cable Flexing for Fiber Optic Interconnecting Devices |
| ANSI/TIA/EIA 455-200 | 連接偏振嵌入損失.維護光纖和極化光纖軟電線裝置和電纜組件 | Insertion Loss of Connectorized Polarization - Maintaining Fiber or Polarizing Fiber Pigtailed Devices and Cable Assemblies |
| ANSI/TIA/EIA 455-201 | 極化固定纖維或極化纖維軟導線裝置和電纜組件的回程損耗 | Return Loss of Connectorized Polarization-Maintaining Fiber or Polarizing Fiber Pigtailed Devices and Cable Assemblies |
| ANSI/TIA/EIA 455-61A | 用OTDR測量光纖或電纜衰減 | Measurement of Fiber or Cable Attenuation Using an OTDR |
| ANSI/TIA/EIA 455-80-C | 用傳輸功率測量未敷設的單模光纖電纜的截止波長 | Measuring Cutoff Wavelength of Uncabled Single-Mode Fiber by Transmitted Power |
| ANSI/TIA/EIA 455-95A | 光纖和電纜絕對光功率試驗 | Absolute Optical Power Test for Optical Fibers and Cables |
| ANSI/TIA/EIA 472D000-A | 室外設備用光纖通信電纜的分規范 | Sectional Specification for Fiber Optic Communications Cable for Outside Plant Use |
| ANSI/TIA/EIA 568-B-3 | 4對100歐姆5類電纜敷設傳輸性能規范 | Transmission Performance Specifications for 4-pair 100 Ohm Category 5 Cabling |
| ANSI/TIA/EIA 568-B.1-1 | 商用建筑電信電纜標準.第1部分:一般要求.補充件 1.最小四對UTP和四對ScTP接插電纜彎曲半徑 | Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 1 - Minimum 4-Pair UTP and 4-Pair ScTP Patch Cable Bend Radius |
| ANSI/TIA/EIA 568-B.1-2 | 商用建筑電信電纜敷設標準.第1部分:一般要求.附錄2.鎧裝水平電纜敷設的接地和連接規范 | Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 2 - Grounding and Bonding Specifications for Screened Horizontal Cabling |
| ANSI/TIA/EIA 568-B.1 | 商用建筑物電信電纜敷設標準 | Commercial Building Telecommunications Cabling Standard |
| ANSI/TIA/EIA 568-B.1-3 | 商用建筑電信電纜敷設標準.第1部分:一般要求.附錄3.根據纖維類型決定的光纖設備的可支持距離和信道衰減 | Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 3 - Supportable Distances and Channel Attenuation for Optical Fiber Applications by Fiber Type |
| ANSI/TIA/EIA 568-B.1-4 | 商用建筑電信電纜敷設標準.第1部分:一般要求.附錄4.類別6、850nm激光優選50/125微米多模纖維 | Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 4 - Recognition of Category 6 and 850 nm laser-Optimized 50/125 Micron Multi-mode Fiber |
| ANSI/TIA/EIA 568-B.2-1 | 商用建筑電信電纜敷設標準.第2部分:對稱絞線對元件.補充1.四線對100 OHM 6類電纜敷設傳輸性能規范 | Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted Pair Components - Addendum 1 - Transmission Performance Specifications for 4-Pair 100 Ohm Category 6 Cabling |
| ANSI/TIA/EIA 568-B.2-2 | 商用建筑物電信電纜敷設標準.第2部分:雙絞線對稱電纜敷設 | Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted-Pair Cabling |
| ANSI/TIA/EIA 568-B.2 | 商用建筑物電信電纜敷設標準.第2部分:對稱絞線對電纜敷設 | Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted-Pair Cabling |
| ANSI/TIA/EIA 568-B.2-3 | 商用建筑電信電纜敷設標準.第2部分:平衡絞線對電纜.補充件3:插入損耗和回波損耗通過/失敗測定的附加考慮 | Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted-Pair Cabling - Addendum 3 - Additional Considerations for Insertion Loss and Return Loss Pass/Fail Determination |
| ANSI/TIA/EIA 568-B.2-4 | 商用建筑電信電纜敷設標準.第2部分:對稱絞線對電纜敷設元件.補充4.銅制連接零件的非釬焊連接可靠性要求 | Commercial Building Telecommunications Cabling Standard - Part 2: Balanced Twisted Pair Cabling Components - Addendum 4 - Solderless Connection Reliability Requirements for Copper Connecting Hardware |
| ANSI/TIA/EIA 570-A-2 | 住宅用電信電纜敷設標準.補充件2:住宅用管理電纜敷設 | Residential Telecommunications Cabling Standard - Addendum 2 - Control Cabling for Residences |
| ANSI/TIA/EIA 570-A-3 | 住宅電信電纜布線標準.補充件3:居民區家庭音頻布線 | Residential Telecommunications Cabling Standard - Addendum 3 - Whole-Home Audio Cabling for Residences |
| ANSI/TIA/EIA 758-1 | 屬于消費者的戶外電信電纜 | Customer-Owned Outside Plant Telecommunications Cabling |
| ANSI/TIA/EIA 758 | 屬于消費者的戶外電信電纜 | Customer-Owned Outside Plant Telecommunications Cabling |
| ANSI/TIA/EIA 854 | 在6類平衡絞線對電纜上用1000Mb/s (1000BASE-TX)速度操作的全雙向以太網地物理層規范 | A Full Duplex Ethernet Physical Layer Specification for 1000Mb/s (1000BASE-TX) Operating Over Category 6 Balanced Twisted Pair Cabling |
| ANSI/TIA/EIA 862 | 商用建筑物用建筑物自動化系統電纜敷設標準 | Building Automation Systems Cabling Standard for Commercial Buildings |
| ANSI/UL 1072 | 中等電壓電力電纜安全性標準（推薦日期2006-2-24） | Standard for Safety for Medium-Voltage Power Cables (Proposal dated February 24, 2006) |
| ANSI/UL 1277 | 任選光纖構件的電力電纜和控制盤電纜的安全標準(第4版) | Standard for Safety for Electrical Power and Control Tray Cables with Optional Optical-Fiber Members (4th edition) |
| ANSI/UL 13 | 有功率限制的電路電纜的安全標準 | Standard for Safety for Power-Limited Circuit Cables |
| ANSI/UL 1424 | 有限功率火災報警線路用電纜的安全標準 | Standard for Safety for Cables for Power-Limited Fire-Alarm Circuits |
| ANSI/UL 1426 | 小艇用電纜 | Cables for Boats |
| ANSI/UL 1569 | 金屬包覆電纜的安全標準 | Standard for Safety for Metal-Clad Cables |
| ANSI/UL 1655 | 社區天線電視電纜用安全標準 | Standard for Safety for Community-Antenna Television Cables |
| ANSI/UL 1666 | 直立安裝于軸上的電纜和光纜的火焰擴散高度試驗 | Test for Flame Propagation Height of Electrical and Optical-Fiber Cables Installed Vertically in Shafts |
| ANSI/UL 1682 | 針狀與套狀插頭、插座和電纜連接器安全性標準 | Standard for Safety for Plugs, Receptacles, and Cable Connectors, of the Pin and Sleeve Type |
| ANSI/UL 209 | 網狀金屬地面電纜管和配件的安全標準 | Standard for Safety for Cellular Metal Floor Raceways and Fittings |
| ANSI/UL 2196 | 防火電纜的試驗標準 | Standard for Tests for Fire Resistive Cables |
| ANSI/UL 2225 | 分類危險場所用的電纜和電纜裝配安全標準 | Standard for Safety for Cables and Cable-Fittings for Use in Hazardous (Classified) Locations |
| ANSI/UL 2239 | 導線管、管道和電纜支持用五金件標準 | Standard for Hardware for the Support of Conduit, Tubing and Cable |
| ANSI/UL 2556 | 電線和電纜的標準試驗方法 | Standard Test Methods for Wires and Cables (Bulletin) |
| ANSI/UL 4 | 鎧裝電纜 | Armored Cable |
| ANSI/UL 44 | 橡膠絕緣電線和電纜 | Rubber-Insulated Wires and Cables |
| ANSI/UL 444 | 通信電纜安全標準 | Standard for Safety for Communications Cables |
| ANSI/UL 493 | 熱塑性塑料絕緣的地下電源線和支路電纜 | Thermoplastic-Insulated Underground Feeder and Branch-Circuit Cables |
| ANSI/UL 5 | 地面金屬電纜槽和附件 | Surface Metal Raceways and Fittings |
| ANSI/UL 568 | 非金屬電纜盤系統的安全標準 | Standard for Safety for Nonmetallic Cable Tray Systems |
| ANSI/UL 5A | 非金屬表面電纜管道和配件的安全標準 | Standard for Safety for Non-Metallic Surface Raceways and Fittings |
| ANSI/UL 5B | 支柱型槽形電纜管道和配件 | Strut-Type Channel Raceways and Fittings |
| ANSI/UL 5C | 與數據、信號和控制電路一起使用的表面電纜管道和配件的安全標準 | Standard for Safety for Surface Raceways and Fittings for Use with Data, Signal and Control Circuits |
| ANSI/UL 83 | 熱塑性絕緣電線和電纜 | Thermoplastic-Insulated Wires and Cables |
| ANSI/UL 854 | 引入電纜.維修 | Service-Entrance Cables |
| ANSI/UL 884 | 地板下電纜管和配件的安全標準 | Standard for Safety for Underfloor Raceways and Fittings |
| ASTM A 523 | 高壓管型電纜線路用平端無縫與電阻焊鋼管的標準規范 | Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits |
| ASTM B 694 | 電纜護套用銅、銅合金、包銅青銅和包銅不銹鋼薄板和帶材標準規范 | Standard Specification for Copper, Copper-Alloy, Copper-Clad Bronze (CCB), Copper-Clad Stainless Steel (CCS), and Copper-Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable Shielding |
| ASTM B 736 | 鋁、鋁合金和鋁包層鋼電纜屏蔽材料標準規范 | Standard Specification for Aluminum, Aluminum Alloy and Aluminum-Clad Steel Cable Shielding Stock |
| ASTM B 784 | 絕緣電纜用改進的同芯絞捻銅導線標準規范 | Standard Specification for Modified Concentric-Lay-Stranded Copper Conductors for Use in Insulated Electrical Cables |
| ASTM D 1047 | 電線及電纜用聚氯乙烯套管的標準規范 | Standard Specification for Poly(Vinyl Chloride) Jacket for Wire and Cable |
| ASTM D 1248 | 電線和電纜用聚乙烯塑料擠制材料標準規范 | Standard Specification for Polyethylene Plastics Extrusion Materials For Wire and Cable |
| ASTM D 1351 | 電線和電纜用熱塑性聚乙烯絕緣材料的標準規范 | Standard Specification for Thermoplastic Polyethylene Insulation for Electrical Wire and Cable |
| ASTM D 1523 | 工作溫度為90℃的電線和電纜用合成橡膠絕緣材料的標準規范 | Standard Specification for Synthetic Rubber Insulation for Wire and Cable, 90°C Operation |
| ASTM D 2219 | 電線和電纜用聚氯乙烯絕緣材料(工作溫度60℃)的標準規范 | Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 60°C Operation |
| ASTM D 2220 | 工作溫度75℃時電線和電纜的聚氯乙烯絕緣性的標準規范 | Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 75°C Operation |
| ASTM D 2308 | 電線和電纜用熱塑性聚乙烯套的標準規范 | Standard Specification for Thermoplastic Polyethylene Jacket for Electrical Wire and Cable |
| ASTM D 2633 | 電線及電纜用熱塑絕緣材料和護套的標準試驗方法 | Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable |
| ASTM D 2655 | 額定電壓為0到2000V的電線和電纜用交聯聚乙烯絕緣材料的標準規范 | Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 0 to 2000 V |
| ASTM D 2656 | 疃ǖ繆刮001到35000V的電線和電纜用交聯聚乙烯絕緣材料的標準規范 | Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 2001 to 35 000 V |
| ASTM D 2768 | 電線和電纜用普通的乙丙橡膠護套標準規范 | Standard Specification for General-Purpose Ethylene-Propylene Rubber Jacket for Wire and Cable |
| ASTM D 2770 | 電線及電纜用耐臭氧的乙丙橡膠整體絕緣材料及套管材料標準規范 | Standard Specification for Ozone-Resisting Ethylene-Propylene Rubber Integral Insulation and Jacket for Wire and Cable |
| ASTM D 2802 | 電線及電纜用耐臭氧乙烯烴聚合物絕緣材料的標準規范 | Standard Specification for Ozone-Resistant Ethylene-Alkene Polymer Insulation for Wire and Cable |
| ASTM D 3485 | 預組合電線及電纜用平滑壁螺旋式聚乙烯導管的標準規范 | Standard Specification for Smooth-Wall Coilable Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable |
| ASTM D 3554 | 75℃工作條件下電線及電纜用不留痕跡的黑色熱塑高密度聚乙烯絕緣材料標準規范 | Standard Specification for Track-Resistant Black Thermoplastic High-Density Polyethylene Insulation for Wire and Cable, 75oC Operation |
| ASTM D 3555 | 90℃工作條件下電線及電纜用不留痕跡的黑色交聯聚乙烯絕緣材料標準規范 | Standard Specification for Track-Resistant Black Crosslinked Polyethylene Insulation for Wire and Cable, 90oC Operation |
| ASTM D 4244 | 電線及電纜用普通的、重型及超重型丙烯腈-丁二烯/聚氯乙烯套管的標準規范 | Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Acrylonitrile-Butadiene/Poly(Vinyl Chloride) (NBR/PVC) Jackets for Wire and Cable |
| ASTM D 4245 | 在干90℃/濕75℃時電線和電纜的耐臭氧熱塑性彈性體絕緣的標準規范 | Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90°C Dry/75°C Wet Operation |
| ASTM D 4246 | 在90℃時電線和電纜的耐臭氧熱塑性彈性體絕緣的標準規范 | Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90°C Operation |
| ASTM D 4313 | 電線及電纜用普通、重型及超重型交聯氯化聚乙烯(CM)套管標準規范 | Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorinated Polyethylene (CM) Jackets For Wire and Cable |
| ASTM D 4314 | 電線及電纜用普通、重型及超重型交聯氯磺化聚乙烯(CSM)套管的標準規范 | Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorosulfonated Polyethylene (CSM) Jackets For Wire and Cable |
| ASTM D 4363 | 電線和電纜用熱塑氯化聚乙烯套管規格標準規范 | Standard Specification for Thermoplastic Chlorinated Polyethylene (CM) Jacket for Wire and Cable |
| ASTM D 4565 | 遠程通信電線和電纜用絕緣體和套管的物理和環境性能特性的標準試驗方法 | Standard Test Methods for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable |
| ASTM D 4566 | 遠程通信電線和電纜用絕緣體和套管的電氣性能特性的標準試驗方法 | Standard Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable |
| ASTM D 4568 | 評價電纜填充物、溢流元件、聚烯烴線和電纜材料間相容性的標準試驗方法 | Standard Test Methods for Evaluating Compatibility Between Cable Filling and Flooding Compounds And Polyolefin Wire and Cable Materials |
| ASTM D 470 | 電線和電纜用交聯絕緣材料與套管的標準試驗方法 | Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable |
| ASTM D 4730 | 電信電線和電纜用浸漬化合物的標準規范 | Standard Specification for Flooding Compounds for Telecommunications Wire and Cable |
| ASTM D 4731 | 電信電線和電纜用熱充填化合物的標準規范 | Standard Specification for Hot-Application Filling Compounds for Telecommunications Wire and Cable |
| ASTM D 4732 | 電信電線和電纜用冷充填化合物的標準規范 | Standard Specification for Cool-Application Filling Compounds for Telecommunications Wire and Cable |
| ASTM D 4872 | 電線和電纜填充物介電性測試的標準試驗方法 | Standard Test Method for Dielectric Testing of Wire and Cable Filling Compounds |
| ASTM D 532 | 電線及電纜用天然橡膠套管規格 | Natural Rubber Jacket for Wire and Cable |
| ASTM D 5424 | 電纜或光纜中絕緣材料在立式電纜槽結構中燃燒時的煙霧遮蔽性標準試驗方法 | Standard Test Method for Smoke Obscuration of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration |
| ASTM D 5537 | 電纜或光纜絕緣材料在立式電纜槽裝置中燃燒時熱發散、火焰?zhèn)鞑?、煙的昏暗度和質量損失測試的標準試驗方法 | Standard Test Method for Heat Release, Flame Spread, Smoke Obscuration, and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration |
| ASTM D 5875 | 地下水質量監測設備安裝和地質環境勘探的取樣方法和電纜工具鉆探的使用標準指南 | Standard Guide for Use of Cable-Tool Drilling and Sampling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices |
| ASTM D 6070 | 預組裝的電線和電纜用光壁可盤繞的聚乙烯(PE)管道物理特性的標準試驗方法 | Standard Test Methods for Physical Properties of Smooth-Wall, Coilable, Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable |
| ASTM D 6096 | 90鳦 操作的電線和電纜用聚氯乙烯絕緣的標準規范 | Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 90°C Operation |
| ASTM D 6113 | 用錐形量熱計對電纜或光纜中絕緣材料的著火試驗反應特性測定的標準試驗方法 | Standard Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables |
| ASTM D 831 | 電纜及電容器油的氣體含量的標準試驗方法 | Standard Test Method for Gas Content of Cable and Capacitor Oils |
| ASTM D 866 | 電線及電纜用丁苯合成橡膠套 | Standard Specification for Crosslinked Styrene-Butadiene (SBR) Synthetic Rubber Jacket for Wire and Cable |
| ASTM E 585/E 585M | 壓實的礦物絕緣、金屬鎧裝、基底金屬熱電偶電纜的標準規范 | Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Base Metal Thermocouple Cable |
| ASTM F 1835 | 電纜編接裝置的標準指南 | Standard Guide for Cable Splicing Installations |
| ASTM F 1837M | 熱縮電纜引入密封的標準規范(公制) | Standard Specification for Heat-Shrink Cable Entry Seals (Metric) |
| ASTM F 1883 | 美國線規或米制單位導線和電纜規格選擇的標準操作規程 | Standard Practice for Selection of Wire and Cable Size in AWG or Metric Units |
| ASTM F 2180 | 外科植入用金屬絞合線和電纜的標準規范 | Standard Specification for Metallic Implantable Strands and Cables |
| UL 1063 | 機床用電線和電纜 | (Machine-tool wires and cables ) |
| UL 1072 | 常壓電力電纜 | (Medium-voltage power cables ) |
| UL 1277 | 有可選光纖值的電力電纜和控制底座電纜 | (Electrical power and control tray cables with optional optical-fiber members ) |
| UL 13 | 有功率限制的電路電纜 | (Power-limited circuit cables ) |
| UL 1309 | 海船電纜 | (Marine shipboard cable ) |
| UL 1425 | 非動力限制火災報警電路用電纜 | (Cables for non-power-limited fire-alarm circuits ) |
| UL 1426 | 船用電纜 | (Electrical cables for boats ) |
| UL 1569 | 包覆金屬電纜 | (Metal-clad cables ) |
| UL 1581 | 電線、電纜和軟線的參考標準 | (Reference standard for electrical wires, cables, and flexible cords ) |
| UL 1651 | 光導纖維電纜 | (Optical fiber cable ) |
| UL 1655 | 共用天線電視電纜 | (Community-antenna television cables ) |
| UL 1666 | 電纜和光纜垂直安裝在豎井中時火焰蔓延高度的測試 | (Test for flame propagation height of electrical and optical-fiber cables installed vertically in shafts ) |
| UL 1673 | 電動空間加熱電纜 | (Electric space heating cables ) |
| UL 1682 | 針式和套管型插頭、插孔和電纜連接器 | (Plugs, receptacles, and cable connectors, of the pin and sleeve type ) |
| UL 1685 | 電纜和光纜于垂直槽中的火焰?zhèn)鞑ズ蜔熿F排放試驗 | (Vertical-tray fire-propagation and smoke-release test for electrical and optical-fiber cables ) |
| UL 209 | 網狀金屬地面電纜管和配件 | (Cellular metal floor raceways and fittings ) |
| UL 2196 | 防火電纜試驗 | (Tests for fire resistive cables ) |
| UL 2225 | 危險地區用金屬包皮電纜和電纜密封配件 | (Metal-clad cables and cable-sealing fittings for use in hazardous (classified) locations ) |
| UL 2250 | 儀器盤式電纜 | (Instrumentation tray cable ) |
| UL 4 | 鎧裝電纜 | (Armored cable ) |
| UL 44 | 熱絕緣線和電纜 | (Thermoset-insulated wires and cables ) |
| UL 444 | 通信電纜 | (Communications cables ) |
| UL 493 | 熱塑絕緣埋設電源線和分流電纜 | (Thermoplastic-insulated underground feeder and branch-circuit cables ) |
| UL 5 | 地面金屬電纜管道和配件 | (Surface metal raceways and fittings ) |
| UL 568 | 非金屬電纜托架系統 | (Non-metallic cable tray systems ) |
| UL 5A | 地面非金屬電纜管道和配件 | (Nonmetallic surface raceways and fittings ) |
| UL 5C | 用于數據,信號和控制線路的地面電纜管道和配件 | (Surface raceways and fittings for use with data, signal, and control circuits ) |
| UL 719 | 非金屬護套電纜 | (Nonmetallic-sheathed cables ) |
| UL 814 | 燃氣管信號和點火電纜 | (Gas-tube-sign and ignition cable ) |
| UL 83 | 熱塑絕緣電線和電纜 | (Thermoplastic-insulated wires and cables ) |
| UL 854 | 用戶進線電纜 | (Service-entrance cables ) |
| 編號 | 中文名稱 | 英文名稱 |