微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| BIP 0007 | 通信電纜和設備安裝.要求和可靠性指南 | Telecommunication cabling and equipment installations - A Guide to requirements and responsibilities |
| BS 1858 | 電纜.附件.瀝青基填充化合物 | Electric cables - Accessories - Bitumen-based filling compounds |
| BS 196 | 電壓達250V單相交流電路用帶接地線的保護式不可反轉插頭、插座電纜藕合器與設備藕合器規范 | Specification for protected-type non-reversible plugs, socket-outlets cable-couplers and appliance-couplers with earthing contacts for single phase a.c. circuits up to 250 volts |
| BS 2316 Pts.1 & 2 | 射頻電纜規范.第1部分:一般要求與試驗.第2部分:英國政府公用設施要求 | Specification for radio-frequency cables. General requirements and tests. British Government Services requirements |
| BS 2484 | 混凝土與粘土制直形電纜溝蓋板規范 | Specification for straight concrete and clayware cable covers |
| BS 2562 | 變壓器與電抗器用電纜箱規范 | Specification for cable boxes for transformers and reactors |
| BS 2E 21 | 飛行器用普蘭式電纜 | Pren type electric cables for aircraft |
| BS 2G 180 | 飛行器用電纜固定編接規范 | Specification for permanent splicing of aircraft electrical cables |
| BS 2G 215-1 | 飛機鎳-鉻和鎳-鋁熱電偶延伸電纜.第1部分:導線規范 | Nickel-chromium and nickel-aluminium thermocouple extension cables for aircraft - Specification for conductors |
| BS 2G 215-2 | 飛機鎳-鉻和鎳-鋁熱電偶延伸電纜.第2部分:終端規范 | Nickel-chromium and nickel-aluminium thermocouple extension cables for aircraft - Specification for terminations |
| BS 2G 221 | 米尼氏電纜(米制)規范 | Specification for Minyvin type electric cables (metric units) |
| BS 2G 223 | 飛行器電纜用屏蔽端接裝置規范 | Specification for screen terminating devices for aircraft electric cables |
| BS 2G 232 | 普通飛機機體或設備互連用(135℃)繞扎絕緣電纜規范 | Specification for electric cables for general airframe or equipment interconnect use (135 °C), wrapped insulation |
| BS 2G 238 | 普通機體或設備互連用(260℃)鍍鎳銅和銅合金導線繞扎絕緣電纜規范 | Specification for electric cables for general airframe or equipment interconnect use (260 °C), nickel plated copper and copper alloy conductors, with wrapped insulation |
| BS 3454 | 煤礦用的1.9/3.3kV、300A螺栓連接防火電纜連接器和適配器規范(包括380/660V和640/1100V,300A適配器)規范 | Specification for 1.9/3.3 kV, 300 A bolted flameproof cable couplers and adaptors (including 380/660 V and 640/1100 V, 300 A adaptors) for use in coal mines |
| BS 3858 | 電纜和電線用捆扎和識別套管規范 | Specification for binding and identification sleeves for use on electric cables and wires |
| BS 3905 | 煤礦用3.8/6.6 KV、300 A螺栓連接防火電纜連接器和適配器規范 | Specification for 3.8/6.6 kV, 300 A bolted flameproof cable couplers and adaptors, for use in coal mines |
| BS 3988 | 電氣用鍛鋁規范.絕緣電纜用實芯導線 | Specification for wrought aluminium for electrical purposes - Solid conductors for insulated cables |
| BS 3G 197 | 飛行器用電纜終端的螺柱式接線合規范 | Specification for stud-type terminal blocks for terminations on aircraft electric cables |
| BS 3G 198-2 | 飛機電纜和設備電線用套管.第2部分:套管識別標簽規范 | Sleeves for aircraft electric cables and equipment wires - Specification for slip-on sleeves for identification purposes |
| BS 3G 198-4 | 飛機電纜和設備電線套管.第4部分:粘結和絕緣用碳氟化合物熱收縮套管規范 | Sleeves for aircraft electric cables and equipment wires - Specification for fluoropolymer heat shrinkable sleeving for binding and insulation |
| BS 3G 210 | 單芯和多芯鍍銀銅導體(190℃)或鍍鎳銅導體(260℃)聚四氟乙烯絕緣設備軟線和電纜規范 | Specification for PTFE insulated equipment wires and cables, single- and multi-core, with silver plated copper conductors (190 °C) or nickel plated copper conductors (260 °C) |
| BS 3G 231 | 通用航空電纜和航空航天應用導電體規范 | Specification for conductors for general-purpose aircraft electrical cables and aerospace applications |
| BS 3G 233 | 普通機體或設備互連用(135℃)擠制絕緣電纜規范 | Specification for electric cables for general airframe or equipment interconnect use (135 °C), extruded insulation |
| BS 4553-1 | 600/1000V單相分芯同軸電纜規范.第1部分:帶聚氯乙烯絕緣層的電纜 | Specification for 600/1000 V single-phase split concentric electric cables - Cables having PVC insulation |
| BS 4553-2 | 600/1000V單相分芯同軸電纜規范.第2部分:帶熱固絕緣層的電纜 | Specification for 600/1000 V single-phase split concentric electric cables - Cables having thermosetting insulation |
| BS 4553-3 | 600/1000V單相分芯同軸電纜規范.第3部分:帶熱固絕緣層和遇火有低發散煙霧和腐蝕性氣體的電纜 | Specification for 600/1000 V single-phase split concentric electric cables - Cables having thermosetting insulation and low emission of smoke and corrosive gases when affected by fire |
| BS 4579-2 | 電纜和電線連接器機械和壓合接頭性能規范.第2部分:鎳、鐵及鍍銅導線壓合接頭 | Specification for performance of mechanical and compression joints in electric cable and wire connectors - Compression joints in nickel, iron and plated copper conductors |
| BS 4678-1 | 電纜管道.第1部分:鋼制地表管道規范 | Cable trunking - Steel surface trunking |
| BS 4678-2 | 電纜管道.第2部分:鋼制地板下管道規范 | Cable trunking - Steel underfloor (duct) trunking |
| BS 4678-4 | 電纜管道.第4部分:絕緣材料制電纜管道規范 | Cable trunking - Specification for cable trunking made of insulating material |
| BS 4727 Pt.2 Group 08 | 電工、電力、電信、電子學、照明和顏色術語詞匯.第2部分:電力工程專用術語.第08集:電纜術語 | Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering. Electric cable terminology |
| BS 4727-2 Group 08 | 電工、電力、電信、電子學、照明和顏色術語.第2部分:電力工程專用術語.第08集:電纜術語 | Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms - Terms particular to power engineering - Electric cables |
| BS 4737-3.30 | 擅入者報警系統.第3部分:元部件規范.第30節:接線用聚氯乙烯絕緣電纜規范 | Intruder alarm systems - Specifications for components - Specification for PVC insulated cables for interconnecting wiring |
| BS 4808-1 | 電信用帶聚氯乙烯絕緣和聚氯乙烯絕緣護套的低頻電線及電纜規范.第1部分:一般要求和試驗 | Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication - General requirements and tests |
| BS 4808-2 | 電信用帶聚氯乙烯絕緣和聚氯乙烯絕緣護套的低頻電線及電纜規范.第2部分:單股無屏蔽實心或絞合設備線 | Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication - Equipment wires with solid or stranded conductors, unscreened, single |
| BS 4808-3 | 電信用帶聚氯乙烯絕緣和聚氯乙烯絕緣護套的低頻電線及電纜規范.第3部分:單股屏蔽實心或絞合設備線和電纜 | Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication - Cables and equipment wires, with solid or stranded conductors, screened, single |
| BS 4808-4 | 電信用帶聚氯乙烯絕緣和聚氯乙烯絕緣護套的低頻電線及電纜規范.第4部分:雙股、三股、四股和五股無屏蔽實心 | Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication - Equipment wires with solid or stranded conductors, unscreened, in pairs, triples, quads and quintuples |
| BS 4808-5 | 電信用帶聚氯乙烯絕緣和聚氯乙烯絕緣護套的低頻電線及電纜規范.第5部分:雙股屏蔽護套實心或絞合線電纜 | Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication - Cables with solid or stranded conductors, screened and sheathed, one pair |
| BS 4937-30 | 國際熱耦基準表.第30部分:延伸和補償電纜.公差和標識制度 | International thermocouple reference tables - Extension and compensating cables - Tolerances and identification system |
| BS 4G 178-2 | 飛機電纜電線壓接頭.第2部分:壓接檢驗規范(包括用戶檢驗試驗) | Crimped joints for aircraft electrical cables and wires - Specification for control of crimping (including user control tests) |
| BS 4G 198-1 | 飛機電器電纜和設備導線用套管.第1部分:連接和識別用橡膠套管規范 | Sleeves for aircraft electric cables and equipment wires - Specification for elastomeric sleeves for binding and identification |
| BS 4G 198-3 | 飛行器電纜和設備導線的套管和模制元件.連接、絕緣和標識用的熱收縮套管規范 | Sleeves and moulded components for aircraft electric cables and equipment wires - Specification for heat-shrinkable sleeving for binding, insulation, and identification |
| BS 5099 | 電纜.火花試驗電壓級 | Electric cables - Voltage levels for spark testing |
| BS 5308-1 | 儀器用電纜.第1部分:聚乙烯絕緣電纜規范 | Instrumentation cables - Specification for polyethylene insulated cables |
| BS 5308-2 | 儀器用電纜.第2部分:聚氯乙烯絕緣電纜規范 | Instrumentation cables - Specification for PVC insulated cables |
| BS 5372 | 額定電壓為600/1000V和1900/3700V的銅或鋁導體多芯擠制固體電介質絕緣電纜終端的尺寸規范 | Specification for dimensions of cable terminations for multi-core extruded solid dielectric insulated distribution cables of rated voltages 600/1000 V and 1900/3300 V having copper or aluminium conductors |
| BS 542 | 礦井和采石場設備用電纜密封裝置和密封盒規范 | Specification for cable glands and sealing boxes for association with apparatus for use at mines and quarries |
| BS 5G 178-1 | 飛機電纜和電線用壓合連接器.第1部分::元件和工具設計要求(包括試驗)規范 | Crimped joints for aircraft electrical cables and wires - Specification for design requirements (including tests) for components and tools |
| BS 6004 | 電纜.電力、照明和內部布線用電壓不超過450/750V（含450/750V）的PVC絕緣非鎧裝電纜 | Electric cables - PVC insulated, non-armoured cables for voltages up to and including 450/750 V, for electric power, lighting and internal wiring |
| BS 6007 | 電纜.內部布線用電壓不超過450/750V（含450/750V）的單芯未包覆絕熱電纜 | Electric cables - Single core unsheathed heat resisting cables for voltages up to and including 450/750 V, for internal wiring |
| BS 6007 | 電纜.內部布線用電壓不超過450/750V（含450/750V）的單芯非鎧裝耐熱電纜 | Electric cables - Single core unsheathed heat resisting cables forvoltages up to and including 450/750 V, for internal wiring |
| BS 6121-1 | 機械電纜密封套.鎧裝密封套.要求和試驗方法 | Mechanical cable glands - Armour glands - Requirements and test methods |
| BS 6121-5 | 機械電纜密封套.電纜密封套和鎧裝密封套的選擇、安裝和檢驗的實施規范 | Mechanical cable glands - Code of practice for selection, installation and inspection of cable glands and armour glands |
| BS 6207-3 | 額定電壓不超過750V的礦物絕緣電纜.使用指南 | Mineral insulated cables with a rated voltage not exceeding 750 V. Guide to use |
| BS 6234 | 電纜的聚乙烯絕緣包覆層規范 | Specification for polyethylene insulation and sheath of electric cables |
| BS 638-4 | 電弧焊電源、設備和附件.第4部分:焊接電纜規范 | Arc welding power sources, equipment and accessories - Specification for welding cables |
| BS 6387 | 在火災情況下保持電路完好的電纜性能要求規范 | Specification for performance requirements for cables required to maintain circuit integrity under fire conditions |
| BS 6435 | 變壓器與電抗線圈的高壓電纜干燥端子用未充填護套規范 | Specification for unfilled enclosures for the dry termination of HV cables for transformers and reactors |
| BS 6436 | 電纜箱或分電站連接用接地配電變壓器規范 | Specification for ground mounted distribution transformers for cable box or unit substation connection |
| BS 6469-99.1 | 電纜的絕緣和護套材料.第99部分:應用于英國但不規定在BS EN 60811標準和BS 6469標準其他部分的試驗方法,.第 | Insulating and sheathing materials of electric cables - Test methods used in the United Kingdom but not specified in BS EN 60811: Non-electrical tests |
| BS 6469-99.2 | 電纜的絕緣和護套材料.第99部分:用于英國的試驗方法,但不規定在BS EN 60811或BS 6469的其它部分中.第2節:電 | Insulating and sheathing materials of electric cables - Test methods used in the United Kingdom but not specified in BS EN 60811 or other Parts of BS 6469: Electrical tests |
| BS 6480 | 額定電壓在33KV及以下的鉛與鉛合金護套浸漬紙絕緣的電纜規范 | Specification for impregnated paper-insulated lead or lead alloy sheathed electric cables of rated voltages up to and including 33000 V |
| BS 6500 | 電纜.家庭,辦公室和類似環境用的裝置和設備使用的額定電壓在300/500V以下的柔性電纜 | Electric cables - Flexible cords rated up to 300/500 V, for use with appliances and equipment intended for domestic, office and similar environments |
| BS 6513-1 | 寬帶電纜配電系統.第1部分:術語詞匯 | Wideband cabled distribution systems - Glossary of terms |
| BS 6513-2 | 寬帶電纜配電系統.第2部分:測量方法 | Wideband cabled distribution systems - Methods of measurement |
| BS 6513-4 | 寬帶電纜配電系統.第4部分:逆向電視機性能要求規范 | Wideband cabled distribution systems - Specification for performance requirements, for upstream television |
| BS 6513-5 | 寬帶電纜的配電系統.第5部分:單向和相互作用的數據使用推薦標準 | Wideband cabled distribution systems - Recommendations for one-way and interactive data services |
| BS 6622 | 額定電壓范圍為(3800~6600)V和(19000~33000)V,有擠壓交叉連接的聚乙烯或乙烯丙烯橡膠絕緣層的電纜規范 | Specification for cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3.8/6.6 kV up to 19/33 kV |
| BS 6701 | 電信設備和電信電纜敷設.安裝、運行和維護規范 | Telecommunications equipment and telecommunications cabling - Specification for installation, operation and maintenance |
| BS 6708 | 礦井和露天礦用撓性電纜 | Flexible cables for use at mines and quarries |
| BS 6724 | 采用熱固絕緣和受火情影響時散發出少量煙霧和腐蝕氣體的600/1000V和1900/3300V鎧裝電纜規范 | Electric cables - Thermosetting insulated, armoured cables for voltages of 600/1000 V and 1900/3300 V, having low emission of smoke and corrosive gases when affected by fire |
| BS 6883 | 船舶和活動式與固定式近海設備中固定布線用的彈性絕緣電纜.要求和試驗方法 | Elastomer insulated cables for fixed wiring in ships and on mobile and fixed offshore units - Requirements and test methods |
| BS 6904 | 額定電壓等于或高于72.5kV的氣體絕緣金屬封閉式開關裝置用電纜連接件指南 | Guide for cable connections for gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above |
| BS 6910-1 | 電壓范圍為交流1000V 和直流1500V 的冷澆注樹脂復合物和熱縮電纜接頭.第1部分:材料規范 | Cold pour resin compound and heat-shrink cable joints in the voltage range up to 1000 V a.c. and 1500 V d.c. Specification for materials |
| BS 6910-2 | 電壓范圍為交流1000V和直流1500Vd.c.的低溫澆注樹脂復合物和熱縮電纜接頭.第2部分:現場安裝實用規程 | Cold pour resin compound and heat-shrink cable joints in the voltage range up to 1000 V a.c. and 1500 V d.c. Code of practice for on-site installation |
| BS 6913-6 | 運土機械的操作和維修.第6部分:電線和電纜的識別和標志規范 | Operation and maintenance of earth-moving machinery - Specification for identification and marking of electrical wires and cables |
| BS 6946 | 電氣設備用金屬管道電纜支撐系統規范 | Specification for metal channel cable support systems for electrical installations |
| BS 7019 | 電壓可達或等于6.6KV的系統(主要用于礦山)采用全屏蔽400A栓接式防火電纜連接器和轉接器規范 | Specification for fully screened 400 A bolted flameproof cable couplers and adaptors for use on systems up to and including 6.6 kV, primarily for use in mines |
| BS 7197 | 電力電纜終端連接和電壓達36KV系統連接性能規范 | Specification for performance of bonds for electric power cable terminations and joints for system voltages up to 36 kV |
| BS 7211 | 受火情影響時排放少量煙霧和腐蝕性氣體的電力和照明設備用熱固絕緣(非鎧裝)電纜規范 | Electric cables - Thermosetting insulated, non-armoured cables for voltages up to and including 450/750 V, for electric power, lighting and internal wiring, and having low emission of smoke and corrosive gases when affected by fire |
| BS 7215 | 電壓大于1KV和達36KV的分離式絕緣電纜連接器系統規范 | Specification for separable insulated cable connector systems above 1 kV and up to 36 kV |
| BS 7346-6 | 煙和熱控制系統部件.電纜系統規范 | Components for smoke and heat control systems - Specifications for cable systems |
| BS 7383 | 煤礦用電壓不超過11KV的作為外殼內連接電纜填充劑的冷澆樹脂基化合物規范 | Specification for cold-pour resin-based compound for use as a filling medium in terminating cables in enclosures for voltages not exceeding 11 kV for use in coal mines |
| BS 7450 | 動力電纜尺寸最經濟值測定方法 | Method for determination of economic optimization of power cable size |
| BS 7540-2 | 電纜.額定電壓不超過450/750V的電纜使用指南.HD 21和HD 22的協調電纜類型 | Electric cables - Guide to use for cables with a rated voltage not exceeding 450/750 V. Harmonized cable types from HD 21 and HD 22 |
| BS 7540-3 | 電纜.額定電壓不超過450/750V的電纜使用指南.不包括在HD 21和HD 22中的國家標準電纜 | Electric cables - Guide to use for cables with a rated voltage not exceeding 450/750 V. National standard cables not included in HD 21 and HD 22 |
| BS 7609 | 銅或鋁導線動力電纜用非絕緣壓縮和機械聯接器的安裝和檢驗實用規程 | Code of practice for installation and inspection of uninsulated compression and mechanical connectors for power cables with copper or aluminium conductors |
| BS 7629-1 | 具有低排放煙霧和腐蝕性氣體的300/500 V電纜受火情影響時的耐火規范.第1部分:多心電纜 | Specification for 300/500 V fire resistant electric cables having low emission of smoke and corrosive gases when affected by fire - Multicore cables |
| BS 7629-2 | 具有低排放煙霧和腐蝕性氣體的300/500 V電纜受火情影響時的耐火規范.第2部分:多雙股電纜 | Specification for 300/500 V fire resistant electric cables having low emission of smoke and corrosive gases when affected by fire - Multipair cables |
| BS 7655-1.2 | 電纜用絕緣和鎧裝材料規范.彈性絕緣化合物.90℃時通用 | Specification for insulating and sheathing materials for cables - Part 1. Cross-linked elastomeric insulating compounds - Section 1.2 General 90 °C application |
| BS 7655-1.3 | 電纜用絕緣和鎧裝材料規范.彈性絕緣化合物.XLPE | Specification for insulating and sheathing materials for cables - Elastomeric insulating compounds - XLPE - Sec1.3 XLPE |
| BS 7655-1.4 | 電纜用絕緣和鎧裝材料規范.彈性絕緣化合物.耐油型 | Specification for insulating and sheathing materials for cables - Elastomeric insulating compounds - Oil resisting types - Oil resisting types |
| BS 7655-1.5 | 電纜用絕緣和鎧裝材料規范.彈性絕緣化合物.耐火復合物 | Specification for insulating and sheathing materials for cables - Part 1: Cross-linked elastomeric insulating compounds - Section 1.5: Flame retardant composites |
| BS 7655-10.1 | 電纜用絕緣和鎧裝材料規范.聚乙烯鎧裝化合物.熱塑中等密度聚乙烯(MDPE)鎧裝化合物 | Specification for insulating and sheathing materials for cables - Part 10: Polyethylene sheathing compounds - Section 10.1: Thermoplastic medium density polyethylene (MDPE) sheathing compound |
| BS 7655-2.3 | 電纜用絕緣和鎧裝材料規范.彈性鎧裝化合物.一般用途 | Specification for insulating and sheathing materials for cables - Elastomeric sheathing compounds - General application - General application |
| BS 7655-2.4 | 電纜用絕緣和鎧裝材料規范.彈性鎧裝化合物.焊接電纜包敷物 | Specification for insulating and sheathing materials for cables - Part 2: Cross-linked elastomeric sheathing compounds - Section 2.4: Welding cable covering |
| BS 7655-2.6 | 電纜用絕緣和鎧裝材料規范.彈性鎧裝化合物.船只布線和近海設備用鎧裝化合物 | Specification for insulating and sheathing materials for cables - Part 2: Cross-linked elastomeric sheathing compounds - Section 2.6: Sheathing compounds for ships' wiring and offshore applications |
| BS 7655-3.2 | 電纜用絕緣和鎧裝材料規范.PVC絕緣化合物.硬等級型 | Specification for insulating and sheathing materials for cables - PVC insulating compounds - Hard grade types - Hard grade types |
| BS 7655-4.2 | 電纜用絕緣和鎧裝材料規范.PVC鎧裝化合物.一般用途 | Specification for insulating and sheathing materials for cables - PVC sheathing compounds - General application - General application |
| BS 7727 | 銅導體面積達6平方毫米(10AWG)電纜的預絕緣壓力終端和連接器的安裝和檢測實用規程 | Code of practice for installation and inspection of pre-insulated compression terminals and connectors for cables with copper conductors up to 6 mm2 |
| BS 7769-1.1 | 電纜.電流額定值的計算.電流額定值方程式(100%載荷系數)和損失率的計算.總則 | Electric cables - Calculation of the current rating - Current rating equations (100% load factor) and calculation of losses - General |
| BS 7769-1.2 | 電纜.額定電流的計算.額定電流方程式(負荷率100%)和損失率的計算.平面結構雙電路鉛包渦流損失率的計算 | Electric cables - Calculation of the current rating - Current rating equations (100% load factor) and calculation of losses - Sheath eddy current loss factors for two circuits in flat formation |
| BS 7769-2-2.1 | 電纜.額定電流的計算.熱阻.熱阻的計算 | Electric cables - Calculation of the current rating - Thermal resistance - Calculation of thermal resistance - Section 2.1: Calculation of thermal resistance |
| BS 7769-2.1 | 電纜.電流額定值的計算.熱電阻.熱電阻的計算 | Electric cables - Calculation of the current rating - Thermal resistance - Calculation of thermal resistance |
| BS 7769-2.2 | 電纜. 額定電流的計算.熱變電阻.室外避免太陽輻射的電纜組減縮系數的計算方法 | Electric cables - Calculation of the current rating - Thermal resistance - A method for calculating reduction factors for groups of cables in free air, protected from solar radiation |
| BS 7769-3.1 | 電纜.電流額定值的計算.操作條件部分.基準操作條件和電纜型號的選擇 | Electric cables - Calculation of the current rating - Sections on operating conditions - Reference operating conditions and selection of cable type |
| BS 7816-3 | 聚合物長期輻射老化的測定.低壓電纜材料使用的監控程序 | Determination of long-term radiation ageing in polymers - Procedures for in-service monitoring of low-voltage cable materials |
| BS 7821-2.1 | 最高電壓不超過36KV的設備用的50Hz、50-2500KVA三相油浸式配電變壓器.帶有高壓和/或低壓端電纜接線盒的配電 | Three phase oil-immersed distribution transformers, 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Distribution transformers with cable boxes on the high voltage and/or low voltage side - General requirements |
| BS 7821-2.2 | 50HZ,最高電壓不超過36KW的由50-2500KVA的三相油浸配電變壓器.帶高壓和/或低壓單側電纜盒的配電變壓器.與BS | Three phase oil-immersed distribution transformers, 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Distribution transformers with cable boxes on the high voltage and/or low voltage side - Cable boxes of type 1 for use on distribution transformers meeting the requirements of BS 7821-2.1 |
| BS 7821-2.3 | 小于36KV設備的最高電壓值為50Hz、50-2500KVA三相油浸式配電變壓器.位于高壓線和/或低壓線邊的電纜盒配電變 | Three phase oil-immersed distribution transformers, 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Distribution transformers with cable boxes on the high voltage and/or low voltage side - Cable boxes type 2 for use on distribution transformers meeting the requirements of BS 7821-2.1 |
| BS 7835 | 受火情影響時有少量排放煙和腐蝕氣體的額定電壓從3800/6600V至19000/33000V以下的交聯聚乙烯或乙丙橡膠擠制 | Specification for armoured cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3.8/6.6 kV up to 19/33 kV having low emission of smoke and corrosive gases when affected by fire |
| BS 7846 | 電纜.受火影響時排放少量煙和腐蝕氣體的600/1000 V 熱固絕緣鎧裝耐火電纜 | Electric cables - 600/1000 V armoured fire-resistant cables having thermosetting insulation and low emission of smoke and corrosive gases when affected by fire |
| BS 7861-2 | 煤礦用地層支撐系統部件.鳥籠式電纜螺栓連接規范 | Strata reinforcement support system components used in coal mines - Specification for birdcaged cablebolting |
| BS 787-1 | 礦用式防爆電纜終端箱規范.第1部分:(650V以下三相交流電路用)電動機 直接起動用電纜終端箱 | Specification for mining type flameproof gate-end boxes - Gate-end boxes for direct-on-line motor starting (for use on 3-phase a.c. circuits up to 650 V) |
| BS 787-2 | 礦用式防爆電纜終端箱規范.第2部分:(650V以下三相交流電路用)帶空氣斷路器的電纜終端箱 | Specification for mining type flameproof gate-end boxes - Gate-end boxes with air-break circuit-breakers (for use on 3-phase a.c. circuits up to 650 volts) |
| BS 787-3 | 礦用式防爆電纜終端箱規范.第3部分:帶照明變壓器的電纜終端箱 | Specification for mining type flameproof gate-end boxes - Gate-end boxes with lighting transformers |
| BS 787-4 | 礦用式防爆電纜終端箱規范.第4部分:(650V以下三相交流電路用)鉆機用電纜終端箱 | Specification for mining type flameproof gate-end boxes - Gate-end boxes for drilling machines (for use on 3-phase a.c. circuits up to 650 V) |
| BS 7870-1 | 供電與發電裝置用低電壓和常電壓聚合絕緣電纜.綜述 | LV and MV polymeric insulated cables for use by distribution and generation utilities - General |
| BS 7870-2 | 配電和發電設施用低壓和中等電壓聚合物絕緣電纜.試驗方法 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Methods of test |
| BS 7870-3.10 | 供電與動力裝置用低電壓和常電壓聚合絕緣電纜.額定電壓為0.6/1KV的配電電纜規范.有銅線或鋁導體的PVC隔絕的 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - PVC insulated combined neutral and earth copper wire concentric cables with copper or aluminium conductors |
| BS 7870-3.11 | 供電與動力裝置用低電壓和常電壓聚合絕緣電纜.額定電壓為0.6/1KV的配電電纜規范.有銅線或鋁導體的XLPE隔絕 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - XLPE insulated combined neutral and earth copper wire concentric cables with copper or aluminium conductors |
| BS 7870-3.12 | 供電與動力裝置用低電壓和常電壓聚合絕緣電纜.額定電壓為0.6/1KV的配電電纜規范.當有火焰影響時煙和腐蝕性 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - XLPE insulated combined neutral and earth copper wire concentric cables with copper or aluminium conductors, having low emission of smoke and corrosive gases when affected by fire |
| BS 7870-3.20 | 供電與動力裝置用低電壓和常電壓聚合絕緣電纜.額定電壓為0.6/1KV的配電電纜規范.有銅或鋁導體的PVC隔絕的分 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - PVC insulated split concentric cables with copper or aluminium conductors |
| BS 7870-3.21 | 供電與動力裝置用低電壓和常電壓聚合絕緣電纜.額定電壓為0.6/1KV的配電電纜規范.有銅或鋁導體的XLPE隔絕的 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - XLPE insulated split concentric cables with copper or aluminium conductors |
| BS 7870-3.40 | 供電與動力裝置用低電壓和常電壓聚合絕緣電纜.額定電壓為0.6/1KV的配電電纜規范.有固態鋁導體的銅線波型同 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - XLPE insulated, copper wire waveform concentric cables with solid aluminium conductors |
| BS 7870-3.50 | 配電和發電裝置用低壓和常壓聚合絕緣電纜.額定電壓為0.6/1KV的配電電纜規范.著火時輕微散發煙氣和腐蝕性氣 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Part 3: Specification for distribution cables of rated voltage 0.6/1 kV - Section 3050: XLPE insulated, copper wire waveform or helical concentric cables with solid aluminium conductors, having low emission of smoke and corrosive gases when affected by fire (Implementation of HD 603) |
| BS 7870-4.10 | 配電和發電設施用低壓(LV)和中等電壓(MV)聚合物絕緣電纜.額定電壓為11kV和33kV的擠制絕緣配電電纜的規范.單 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables with extruded insulation for rated voltages of 11 kV and 33 kV - Single-core 11 kV and 33 kV cables - Single core 11 kV and 33 kV cables |
| BS 7870-4.11 | 配電和發電設施用低壓(LV)和中等電壓(MV)聚合物絕緣電纜.額定電壓為11kV和33kV的擠制絕緣配電電纜的規范.單 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables with extruded insulation for rated voltages of 11 kV and 33 kV - Single-core 33 kV lead sheathed cables - Single core 33 kV lead sheathed cables |
| BS 7870-4.20 | 配電和發電設施用低壓(LV)和中等電壓(MV)聚合絕緣電纜.額定電壓為11kV和33kV的擠制絕緣配電電纜的規范.三芯 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables with extruded insulation for rated voltages of 11 kV and 33 kV - Three-core 11 kV cables - Three core 11 kV cables |
| BS 7870-5 | 用于配電和發電設備的低壓和中壓高聚合物絕緣電纜.架空配電用額定電壓0.6/1KV的聚合物絕緣束導體(ABC) | LV and MV polymeric insulated cables for use by distribution and generation utilities - Polymeric insulated aerial bundled conductors (ABC) of rated voltage 0.6/1 kV for overhead distribution |
| BS 7870-6.1 | 配電和發電設施用低電壓和中等電壓聚合物絕緣電纜.電站用具有特殊防火性能的0.6/1kV和1.9/3.3kV電力電纜的 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire performance for use in power stations - PVC insulated and PVC sheathed cables |
| BS 7870-6.2 | 配電和發電設施用低壓和中等電壓聚合物絕緣電纜.電站用具有特別防火性能的0.6/1KV和1.9/3.3KV電力電纜規范. | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire performance for use in power stations - XLPE or HEPR insulated and PVC sheathed cables |
| BS 7870-6.3 | 配電和發電設施用低壓和中等電壓聚合物絕緣電纜.電站用具有特別防火性能的0.6/1KV和1.9/3.3KV電力電纜規范. | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire performance for use in power stations - Cables with thermosetting insulation and non-halogenated sheath |
| BS 7870-7.1 | 配電和發電設施用LV和MV聚合物絕緣電纜.電站用有防火性能的額定電壓為3.8/6.6KV和6.35/11KV電力電纜規范.鹵 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for power cables having rated voltages of 3.8/6.6 kV and 6.35/11 kV with special fire performance for use in power stations - Single core and 3-core cables with halogenated materials and with aluminium or steel wire armouring |
| BS 7870-7.2 | 配電和發電設施用LV和MV聚合絕緣電纜.電站用具有特殊防火性能的額定電壓為3.8/6.6KV和6.35/11KV電力電纜規 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for power cables having rated voltages of 3.8/6.6 kV and 6.35/11 kV with special fire performance for use in power stations - Single-core and 3-core cables with halogen-free materials and with aluminium or steel wire armouring |
| BS 7870-8.1 | 配電和發電設施用低壓(LV)和中等電壓(MV)聚合絕緣電纜.地上或地下安裝用多芯和多對電纜規范.單絲鎧裝和PVC | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for multicore and multipair cables for installation above and below ground - Single wire armoured and PVC sheathed multicore cable with copper conductors - Section 8.1 Single wire armoured and PVC sheathed multicore cable with copper conductors |
| BS 7870-8.2 | 配電和發電設施用低壓(LV)和中等電壓(MV)聚合絕緣電纜.地上和地下安裝用多芯和多對電纜規范.單絲鎧裝和PVC | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for multicore and multipair cables for installation above and below ground - Single wire armoured and PVC sheathed multipair cable with copper conductors - Section 8.2 Single wire armoured and PVC sheathed multipair cable with copper conductors |
| BS 7870-8.3 | 配電和發電設施用低壓(LV)和中等電壓(MV)聚合絕緣電纜.地上和地下安裝用多芯和多對電纜規范.具有降低火焰?zhèn)? | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for multicore and multipair cables for installation above and below ground - Single wire armoured and PVC sheathed multicore cable with copper conductors, having reduced fire propagation performance - Section 8.3 Single wire armoured and PVC sheathed multicore cable with copper conductors, having reduced fire propagation performance |
| BS 7870-8.4 | 配電和發電設施用低壓(LV)和中等電壓(MV)聚合絕緣電纜.地上和地下安裝用多芯和多對電纜規范.具有降低火焰?zhèn)? | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for multicore and multipair cables for installation above and below ground - Single wire or double steel tape armoured and PVC sheathed multipair cable with copper conductors, having reduced fire propagation performance - Section 8.4 Single wire or double steel tape armoured and PVC sheathed multipair cable with copper conductors, having reduced fire propagation performance |
| BS 7870-8.5 | 配電和發電設施用低壓(LV)和中等電壓(MV)聚合絕緣電纜.地上和地下安裝用多芯和多對電纜規范.單絲鎧裝和非鎧 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for multicore and multipair cables for installation above and below ground - Single wire armoured and unarmoured multicore cables with copper conductors and non-halogenated sheath - Section 8.5 Single wire armoured and unarmoured multicore cables with copper conductors and non-halogenated sheath |
| BS 7870-8.6 | 配電和發電設施用低壓(LV)和中等電壓(MV)聚合絕緣電纜.地上和地下安裝用多芯和多對電纜規范.單絲或雙鋼帶鎧 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for multicore and multipair cables for installation above and below ground - Single wire or double steel tape armoured and non-halogenated sheathed multipair cable with copper conductors - Section 8.6 Single wire or double steel tape armoured and non-halogenated sheathed multipair cable with copper conductors |
| BS 7888-4.1 | 用于額定電壓從3,6/6(7,2)kV到20,8/36(42)kV的電力電纜的附件的試驗要求.帶擠壓絕緣層電纜 | Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2)kV up to 20,8/36(42)kV - Part 1: Cables with extruded insulation |
| BS 7888-4.2 | 用于額定電壓從3,6/6(7,2) kV到20,8/36(42)kV的電力電纜的附件的試驗要求.帶浸漬紙絕緣層電纜 | Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42)kV - Part 2: Cables with impregnated paper insulation |
| BS 7889 | 600/1000V單芯非鎧裝熱固性絕緣電纜規范 | Electric cables - Thermosetting insulated, unarmoured cables for a voltage of 600/1000 V |
| BS 7894 | 額定電壓3.8/6.6 kV至19/33 kV的MV浸漬紙絕緣的配線電纜 | MV impregnated paper insulated distribution cables of rated voltages of 3.8/6.6 kV to 19/33 kV |
| BS 7912 | 額定電壓66KV66 kV (UDOWNm=72.5 kV)至132KV(UDOWNm=145kV)帶XLPE絕緣和金屬護套的電力電纜及其配件.要求和 | Power cables with XLPE insulation and metallic sheath, and their accessories, for rated voltages from 66 kV (Um=72.5 kV) to 132kV (Um=145kV) - Requirements and test methods |
| BS 7917 | 船上和移動式或固定式近海設備上的固定布線用的彈性絕緣耐火電纜(固定線路集成度).要求和試驗方法 | Elastomer insulated fire resistant (limited circuit integrity) cables for fixed wiring in ships and on mobile and fixed offshore units - Requirements and test methods |
| BS 7919 | 電纜.工業和類似環境用的設備和裝置用的額定電壓不超過450/750V的柔性電纜 | Electric cables - Flexible cables rated up to 450/750V, for use with appliances and equipment intended for industrial and similar environments |
| BS 7922 | 電纜.交流電壓為400 kV及以下(Um=420kV)的充液的紙和PPL絕緣的金屬護套電纜和配件.要求和試驗方法 | Electric cables - Fluid-filled, paper- and PPL-insulated, metal-sheathed cables and accessories for alternating voltages up to and including 400 kV (Um = 420 kV) - Requirements and test methods |
| BS 7923 | 電纜.交流電壓為275 kV及以下(Um=300kV)的內氣壓電纜和附件.要求和試驗方法 | Electric cables - Internal gas-pressure cables and accessories for alternating voltages up to and including 275 kV (Um = 300 kV) - Requirements and test methods |
| BS 7933-1 | 電纜.附件.材料特性.在加工處理狀態和處理前的樹脂化合物 | Electric cables - Accessories - Material characterization - Resinous compounds before cure and in the cured state |
| BS 7970 | 電纜.額定電壓66kV(Um=72.5kV)至132kV(Um=145kV)帶XLPE絕緣的電力電纜用金屬線和箔護套 | Electric cables - Metallic wire and foil sheath constructions of power cables having XLPE insulation for rated voltages from 66kV (Um = 72.5 kV) to 132kV (Um = 145 kV) |
| BS 8434-2 | 電纜著火完整性評定的試驗方法.應急電路中使用的無防護型小型電纜的試驗.BS EN 50200外加930鳦火焰和噴水器 | Methods of test for assessment of the fire integrity of electric cables - Test for unprotected small cables for use in emergency circuits - BS EN 50200 with 930 deg flame and with water spray |
| BS 8436 | 電纜.墻、隔墻和建筑物空間中使用的著火時有低排煙量和腐蝕氣體釋放的300/500V屏蔽電纜.多芯電纜 | Electric cables - 300/500 V screened electric cables having low emission of smoke and corrosive gases when affected by fire, for use in walls, partitions and building voids - Multicore cables |
| BS 91 | 電纜焊接插座.規范 | Electric cable soldering sockets - Specification |
| BS AU 16a | 電纜連接器(最大連續額定電流17.5A)規范 | Specification for electrical cable connectors (17.5 A maximum continuous rating) |
| BS AU 255-1 | 道路車輛非屏蔽低壓電纜.厚壁絕緣電纜的導線大小和尺寸規范 | Road vehicle unscreened low tension cables - Specification for conductor sizes and dimensions for thick walled insulated cables |
| BS AU 255-2 | 道路車輛非屏蔽低壓電纜.薄壁絕緣電欖的導線大小及尺寸規范 | Road vehicle unscreened low tension cables - Specification for conductor sizes and dimensions for thin walled insulated cables |
| BS AU 267 | 斷開式電纜和二次耦合的實用規程 | Code of practice for breakaway cables and secondary couplings |
| BS AU 7a | 道路車輛電纜的顏色標志規范 | Specification for colour code for road vehicle electrical cables |
| BS AU 88a | 汽車用輕型電纜額定容量推薦標準 | Recommendations for ratings for light duty cables for automobile use |
| BS AU 91 | 起動蓄電池圓錐形接線端子的電纜接頭尺寸(用正極接地部件的汽車和輕便商用汽車)規范 | Specification for dimensions of electrical cable connectors for starter battery taper terminal posts (cars and light commercial vehicles using positive earth system) |
| BS DD CLC/TS 50429 | 光纜.地下電纜.安裝在雨水道和衛生間下水道的光纜的系列規范 | Optical fibre cables - Sewer cables - Family specification for cables to be installed in storm and sanitary sewers |
| BS DD CLC/TS 50430 | 光纜.燃氣管道電纜.高壓燃氣管道電纜的系列規范 | Optical fibre cables - Gas pipe cables - Family specifications for cables to be installed in high pressure gas pipes |
| BS DD CLC/TS 50431 | 光纜.飲用水管道電纜.飲用水管道電纜的系列規范 | Optical fibre cables - Drinking water pipe cables - Family specification for cables to be installed in drinking water pipes |
| BS DD ENV 13149-2 | 公共運輸.道路車輛調度表和控制系統.WORLDFIP電纜線路規范 | Public transport - Road vehicle scheduling and control systems - WORLDFIP cabling specifications |
| BS DD IEC/PAS 62338 | 屏蔽對稱電纜.用三維法測量連接衰減 | Screened balanced cables - Coupling attenuation measurement, triaxial method |
| BS DD ISO/TS 16553 | 道路車輛.數據電纜.試驗方法和要求 | Road vehicles - Data cables - Test methods and requirements |
| BS EN 10257-1 | 電力電纜或通信電纜鎧裝用鍍鋅或鋅合金非合金鋼絲.地面電纜 | Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Land cables |
| BS EN 10257-2 | 電力電纜或通信電纜鎧裝用鋅或鋅合金涂覆非合金鋼絲.海底電纜 | Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Submarine cables |
| BS EN 12548 | 鉛和合金.電纜鎧和護套用鉛合金鑄錠 | Lead and alloys - Lead alloy ingots for electric cable sheathing and for sleeves |
| BS EN 12613 | 具有視覺特征的地下電纜和管道用塑料警告裝置 | Plastic warning devices for underground cables and pipelines with visual characteristics |
| BS EN 13149-5 | 公共運輸.道路車輛調度和控制系統.CANopen電纜敷設規范 | Public transport - Road vehicle scheduling and control systems - CANopen cabling specifications |
| BS EN 13920-3 | 鋁和鋁合金.廢料.廢金屬絲和電纜 | Aluminium and aluminium alloys - Scrap - Wire and cable scrap |
| BS EN 175500 | 電子元器件質量評定協調體系.分規范:包括合格鑒定和能力批準的連接器用輔助輸出電纜 | Harmonized system of quality assessment for electronic components - Sectional specification:cable outlet accessories for connectors, including qualification approval and capability approval |
| BS EN 186150 | OCCA-BU型光纖織物和電纜用連接器組件 | Connector sets for optical fibres and cables - Type OCCA-BU |
| BS EN 186160 | OCCA-PC型光纖織物和電纜用連接器組件 | Connector sets for optical fibres and cables - Type OCCA-PC |
| BS EN 186170 | 電子元器件質量評定協調體系.分規范.光纖和電纜連接裝置.RCC型 | Harmonized system of quality assessment for electronic components - Sectional specification:connector sets for optical fibres and cables - Type RCC |
| BS EN 186260 | 電子元器件質量評定協調體系.分規范:光纖和電纜連接器組件.SC型 | Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables - Type SC |
| BS EN 186270 | 電子元器件質量評定協調體系.分規范:光纖和電纜連接件.LSH型 | Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables - Type LSH |
| BS EN 186290 | 電子元器件質量評定協調體系.光纖和電纜連接件.MPO型 | Harmonized system of quality assessment for electronic components - Connector sets for optical fibres and cables - Type MPO |
| BS EN 186300 | 電子器元件質量評定協調體系.分規范:MSC型光纖和電纜連接裝置 | Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables type MSC |
| BS EN 186310 | 電子元器件質量評定協調體系.分規范:光纖和電纜連接裝置.MF型 | Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables - Type MF |
| BS EN 187105 | 單膜光纖電纜(管道/直接掩埋設備) | Single mode optical cable (duct/direct buried installation) |
| BS EN 2083 | 航空航天系列.電纜用銅及銅合金導體.產品標準 | Aerospace series - Copper and copper alloy conductors for electrical cables - Product standard |
| BS EN 2084 | 航空航天系列.單芯、通用、帶銅或銅合金導體的電纜.技術規范 | Cables, electric, single-core, general purpose, with conductors in copper or copper alloy — Technical specification |
| BS EN 2266-003 | 航空航天系列.通用電纜.操作溫度為-55 °C 到 200 °C.噴墨可印刷.產品標準 | Cables, electrical, for general purpose — Operating temperatures between -55 °C and 200 °C — Part 003: Ink jet printable — Product standard |
| BS EN 2266-005 | 航空航天系列.通用電纜.操作溫度為-55 °C 到 200 °C .紫外激光可印刷.產品標準 | Cables, electrical, for general purpose — Operating temperatures between??-55 ℃ and 200 ℃ — Part 005: UV laser printable — Product standard |
| BS EN 2266-007 | 航空航天系列.通用電纜.操作溫度為-55 °C 到 200 °C .紫外激光可印刷多芯裝套電纜.產品標準 | Cables, electrical, for general purpose — Operating temperatures between –55 ℃ and 200 ℃ — Part 007: UV laser printable multicore jacketed cable — Product standard |
| BS EN 2267-002 | 航空系列.一般用途的電纜,電器.-55 °C和260 °C之間的操作溫度.總則 | Cables, electrical, for general purpose — Operating temperatures between -55 °C and 260 °C — Part 002: General |
| BS EN 2267-003 | 航空系列.一般用途的電纜,電器.-55 °C和260 °C之間的操作溫度.噴墨可打印.產品標準 | Cables, electrical, for general purpose — Operating temperatures between -55 °C and 260 °C— Part 003: Inkjet printable — Product standard |
| BS EN 2267-007 | 航空系列.一般用途的電纜,電器.-55°C和260°C之間的操作溫度.DMA族、單個可打印紫外激光和多芯附件.產品標 | Cables, electrical, for general purpose — Operating temperatures between -55 °C and 260 °C — Part 007: DMA family, single ink-jet printable and multicore assembly — Product standard |
| BS EN 2267-008 | 航空系列.一般用途的電纜,電器.-55°C和260°C之間的操作溫度.DM族、單個可打印紫外激光和多芯附件.產品標 | Cables, electrical, for general purpose — Operating temperatures between -55 °C and 260 °C — Part 008: DM family, single UV laser printable and multicore assembly — Product standard |
| BS EN 2267-009 | 航空系列.一般用途的電纜,電器.-55℃和260℃之間的操作溫度.DRA族、單個可打印UV激光和多芯附件.產品標準 | Cables, electrical, for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 009: DRA family, single and multicore assembly — Product standard |
| BS EN 2267-010 | 航空系列.一般用途的電纜,電器.-55℃和260℃之間的操作溫度.DM族、單個可打印UV激光.產品標準 | Cables, electrical, for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 010: DR family, single UV laser printable — Product standard |
| BS EN 2591-609 | 航空航天系列.電和光學連接元件.試驗方法.光學元件.電纜附件有效性.電纜循環可撓性 | Elements of electrical and optical connection — Test methods — Part 609: Optical elements — Effectiveness of cable attachment — Cable cyclic flexing |
| BS EN 2591-610 | 電氣和光學連接元件.試驗方法.光學元件.電纜連接的效果.電纜拉拔試驗 | Elements of electrical and optical connection - Test methods - Optical elements - Effectiveness of cable attachment - Cable pulling |
| BS EN 2591-611 | 電氣和光學連接元件.試驗方法.光學元件.電纜連接的效果.電纜扭力 | Elements of electrical and optical connection - Test methods - Optical elements - Effectiveness of cable attachment - Cable torsion |
| BS EN 2591-612 | 電氣和光學連接元件.試驗方法.光學元件.電纜附著的效果.電纜軸向壓縮 | Elements of electrical and optical connection - Test methods - Optical elements - Effectiveness of cable attachment - Cable axial compression |
| BS EN 2713-003 | 航空航天系列.單芯和多芯電纜的一般用途.操作溫度在-55 °C 和200 °C之間.屏蔽式（螺旋式）和有護套的可印 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Screened (spiral) and jacketed, ink jet printable - Product standard |
| BS EN 2713-007 | 航空航天系列.單芯和多芯電纜的一般用途.操作溫度在-55 °C 和200 °C之間.屏蔽式（螺旋式）和有護套的可印 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Screened (spiral) and jacketed, UV laser printable - Product standard |
| BS EN 2714-002 | 航空航天系列.通用單芯和多芯電纜.-55度和260度之間操作.屏蔽和護套電纜.總則 | Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 002: Screened and jacketed — General |
| BS EN 2714-003 | 航空航天系列.通用單芯和多芯電纜.-55度and 260度之間操作.屏蔽(螺旋)和橡套電纜.產品標準 | Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 003: Screened (spiral) and jacketed, ink jet printable — Product standard |
| BS EN 2714-007 | 航空航天系列.單芯和多芯電纜的一般用途.操作溫度在-55 °C 和260 °C之間.屏蔽式（螺旋式）和有護套的可印 | Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 007: Screened (spiral) and jacketed, UV laser printable — Product standard |
| BS EN 2714-011 | 航空航天系列.單芯和多芯電纜的一般用途.操作溫度在-55 °C 和260 °C之間.DM族、屏蔽式（螺旋式）和有護套 | Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 011: DM family, screened (spiral) and jacketed, UV laser printable — Product standard |
| BS EN 2714-012 | 航空航天系列.單芯和多芯電纜的一般用途.操作溫度在-55 °C 和260 °C之間.DM族、屏蔽式（麻花型）和有護套 | Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 012: DM family, screened (braided) and jacketed, UV laser printable — Product standard |
| BS EN 2714-013 | 航空航天系列.單芯和多芯電纜的一般用途.操作溫度在-55 °C 和260 °C之間.DM族、屏蔽式（螺旋式）和有護套 | Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 013: DR family, screened (spiral) and jacketed, UV laser printable — Product standard |
| BS EN 2853 | 導體EN 2083的電纜的額定電流 | Current ratings for electrical cables with conductor EN 2083 |
| BS EN 3475-100 | 航空航天系列.飛行器用電纜.試驗方法.總則 | Aerospace series - Cables, electrical, aircraft use - Test methods - General |
| BS EN 3475-201 | 航空航天系列.飛行器用電纜.試驗方法.目視檢查 | Aerospace series - Cables, electrical, aircraft use - Test methods - Visual examination |
| BS EN 3475-202 | 航空航天系列.飛行器用電纜.試驗方法.質量 | Aerospace series - Cables, electrical, aircraft use - Test methods - Mass |
| BS EN 3475-301 | 航空航天系列.飛行器用電纜.試驗方法.單位長度的歐姆電阻 | Aerospace series - Cables, electrical, aircraft use - Test methods - Ohmic resistance per unit length |
| BS EN 3475-303 | 航空航天系列.飛行器用電纜.試驗方法.絕緣電阻 | Aerospace series - Cables, electrical, aircraft use - Test methods - Insulation resistance |
| BS EN 3475-304 | 航空航天系列.飛行器用電纜.試驗方法.表面電阻 | Aerospace series - Cables, electrical, aircraft use - Test methods - Surface resistance |
| BS EN 3475-305 | 航空航天系列.飛行器用電纜.試驗方法.過載電阻 | Aerospace series - Cables, electrical, aircraft use - Test methods - Overload resistance |
| BS EN 3475-306 | 航空航天系列.飛行器用電纜.試驗方法.導線連貫性 | Cables, electrical, aircraft use — Test methods — Part 306: Continuity of conductors |
| BS EN 3475-307 | 航空航天系列.飛行器用電纜.試驗方法.電暈熄滅電壓 | Cables, electrical, aircraft use — Test methods — Part 307: Corona extinction voltage |
| BS EN 3475-401 | 航空航天系列.飛行器用電纜.試驗方法.加速老化試驗 | Aerospace series - Cables, electrical, aircraft use - Test methods - Accelerated ageing |
| BS EN 3475-402 | 航空航天系列.飛行器用電纜.試驗方法.收縮性和脫層 | Aerospace series - Cables, electrical, aircraft use - Test methods - Shrinkage and delamination |
| BS EN 3475-403 | 航空航天系列.飛行器用電纜.試驗方法.脫層和阻塞 | Aerospace series - Cables, electrical, aircraft use - Test methods - Delamination and blocking |
| BS EN 3475-404 | 航空航天系列.飛行器用電纜.試驗方法.熱沖擊 | Aerospace series - Cables, electrical, aircraft use - Test methods - Thermal shock |
| BS EN 3475-405 | 航空航天系列.飛行器用電纜.試驗方法.環境溫度下的彎曲 | Aerospace series - Cables, electrical, aircraft use - Test methods - Bending at ambient temperature |
| BS EN 3475-406 | 航空航天系列.飛行器用電纜.試驗方法.冷彎曲試驗 | Aerospace series - Cables, electrical, aircraft use - Test methods - Cold bend test |
| BS EN 3475-407 | 航空航天系列.飛機用電纜.試驗方法.可燃性 | Cables, electrical, aircraft use — Test methods — Part 407: Flammability |
| BS EN 3475-408 | 航空航天系列.飛機用電纜.試驗方法.耐燃性 | Cables, electrical, aircraft use — Test methods — Part 408: Fire resistance |
| BS EN 3475-409 | 航空航天系列.飛行器用電纜.試驗方法.真空老化試驗 | Aerospace series - Cables, electrical, aircraft use - Test methods - Air-excluded ageing |
| BS EN 3475-410 | 航空航天系列.飛行器用電纜.試驗方法.耐熱性 | Aerospace series - Cables, electrical, aircraft use - Test methods - Thermal endurance |
| BS EN 3475-411 | 航空航天系列.飛行器用電纜.試驗方法.耐液體 | Cables, electrical, aircraft use — Test methods — Part 411: Resistance to fluids |
| BS EN 3475-412 | 航空航天系列.飛行器用電纜.試驗方法.耐濕度 | Aerospace series - Cables, electrical, aircraft use - Test methods - Humidity resistance |
| BS EN 3475-413 | 航空航天系列.飛行器用電纜.試驗方法.反復纏繞試驗 | Aerospace series - Cables, electrical, aircraft use - Test methods - Wrap back test |
| BS EN 3475-414 | 航空航天系列.飛行器用電纜.試驗方法.差示掃描量熱儀(DSC 試驗) | Cables, electrical, aircraft use — Test methods — Part 414: Differential scanning calorimeter (DSC test) |
| BS EN 3475-415 | 航空航天系列.飛行器用電纜.試驗方法.溫度快速改變 | Cables, electrical, aircraft use — Test methods — Part 415: Rapid change of temperature |
| BS EN 3475-416 | 航空航天系列.飛行器用電纜.試驗方法.熱穩定性 | Cables, electrical, aircraft use — Test methods — Part 416: Thermal stability |
| BS EN 3475-501 | 航空航天系列.飛行器用電纜.試驗方法.動態切口 | Aerospace series - Cables, electrical, aircraft use - Test methods - Dynamic cut-through |
| BS EN 3475-502 | 航空航天系列.飛行器用電纜.試驗方法.切口延伸 | Aerospace series - Cables, electrical, aircraft use - Test methods - Notch propagation |
| BS EN 3475-503 | 航空航天系列.飛行器用電纜.試驗方法.擦傷腐蝕 | Aerospace series - Cables, electrical, aircraft use - Test methods - Scrape abrasion |
| BS EN 3475-504 | 航空航天系列.飛行器用電纜.試驗方法.扭力 | Aerospace series - Cables, electrical, aircraft use - Test methods - Torsion |
| BS EN 3475-505 | 航空航天系列.飛行器用電纜.試驗方法.導線和絞線的抗拉試驗 | Aerospace series - Cables, electrical, aircraft use - Test methods - Tensile tests on conductors and strands |
| BS EN 3475-506 | 航空航天系列.飛行器用電纜.試驗方法.電鍍連續性 | Aerospace series - Cables, electrical, aircraft use - Test methods - Plating continuity |
| BS EN 3475-507 | 航空航天系列.飛行器用電纜.試驗方法.電鍍的附著力 | Aerospace series - Cables, electrical, aircraft use - Test methods - Adherence of plating |
| BS EN 3475-508 | 航空航天系列.飛行器用電纜.試驗方法.鍍層厚度 | Aerospace series - Cables, electrical, aircraft use - Test methods - Plating thickness |
| BS EN 3475-509 | 航空航天系列.飛行器用電纜.試驗方法.可焊接性 | Aerospace series - Cables, electrical, aircraft use - Test methods - Solderability |
| BS EN 3475-510 | 航空航天系列.飛行器用電纜.試驗方法.擠壓絕緣護套和套管材料的抗拉強度和延伸率 | Aerospace series - Cables, electrical, aircraft use - Test methods - Tensile strength and elongation of extruded insulation, sheath and jacket material |
| BS EN 3475-511 | 航空航天系列.飛行器用電纜.試驗方法.電纜對電纜的磨耗 | Aerospace series - Cables, electrical, aircraft use - Test methods - Cable-to-cable abrasion |
| BS EN 3475-512 | 航空航天系列.飛行器用電纜.試驗方法.耐彎度 | Aerospace series - Cables, electrical, aircraft use - Test methods - Flexure endurance |
| BS EN 3475-513 | 航空航天系列.飛行器用電纜.試驗方法.耐變形(用塑料電纜扎帶安裝) | Cables, electrical, aircraft use — Test methods — Part 513: Deformation resistance (Installation with plastic cable ties) |
| BS EN 3475-603 | 航空航天系列.飛行器用電纜.試驗方法.耐濕弧光痕跡性能 | Aerospace series - Cables, electrical, aircraft use - Test methods - Resistance to wet arc tracking |
| BS EN 3475-604 | 航空航天系列.飛行器用電纜.試驗方法.耐干弧光的傳播性能 | Aerospace series - Cables, electrical, aircraft use - Test methods - Resistance to dry arc propagation |
| BS EN 3475-605 | 航空航天系列.飛行器用電纜.試驗方法.濕氣短路試驗 | Aerospace series - Cables, electrical, aircraft use - Test methods - Wet short circuit test |
| BS EN 3475-701 | 航空航天系列.飛行器用電纜.試驗方法.絕緣材料與導體的脫層和附著力 | Aerospace series - Cables, electrical, aircraft use - Test methods - Strippability and adherence of insulation to the conductor |
| BS EN 3475-702 | 航空航天系列.飛行器用電纜.試驗方法.屏蔽后推移能力 | Aerospace series - Cables, electrical, aircraft use - Test methods - Screen pushback capability |
| BS EN 3475-703 | 航空航天系列.飛行器用電纜.試驗方法.制造商標記的耐久性 | Aerospace series - Cables, electrical, aircraft use - Test methods - Permanence of manufacturer's marking |
| BS EN 3475-704 | 航空航天系列.飛行器用電纜.試驗方法.撓性 | Aerospace series - Cables, electrical, aircraft use - Test methods - Flexibility |
| BS EN 3475-705 | 航空系航天列.飛機用電纜.試驗方法.對比度測量 | Cables, electrical, aircraft use — Test methods — Part 705: Contrast measurement |
| BS EN 3475-706 | 航空航天系列.飛行器用電纜.試驗方法.激光可標記性 | Cables, electrical, aircraft use — Test methods — Part 706: Laser markability |
| BS EN 3475-801 | 航空航天系列.飛行器用電纜.試驗方法.單位長度導體的電容量 | Aerospace series - Cables, electrical, aircraft use - Test methods - Capacitance per unit length |
| BS EN 3475-802 | 航空航天系列.飛行器用電纜.試驗方法.不平衡導體的電容量 | Aerospace series - Cables, electrical, aircraft use - Test methods - Capacitance unbalance |
| BS EN 3475-803 | 航空航天系列.飛行器用電纜.試驗方法.導體的電容量的變化 | Aerospace series - Cables, electrical, aircraft use - Test methods - Capacitance variation |
| BS EN 3475-804 | 航空航天系列.飛行器用電纜.試驗方法.傳播速度 | Aerospace series - Cables, electrical, aircraft use - Test methods - Velocity of propagation |
| BS EN 3475-805 | 航空航天系列.飛行器用電纜.試驗方法.特性阻抗 | Aerospace series - Cables, electrical, aircraft use - Test methods - Characteristic impedance |
| BS EN 3475-806 | 航空航天系列.飛行器用電纜.試驗方法.衰減性 | Aerospace series - Cables, electrical, aircraft use - Test methods - Attenuation |
| BS EN 3475-807 | 航空航天系列.飛行器用電纜.試驗方法.轉移阻抗 | Aerospace series - Cables, electrical, aircraft use - Test methods - Transfer impedance |
| BS EN 3475-808 | 航空航天系列.飛行器用電纜.試驗方法.交叉談話 | Aerospace series - Cables, electrical, aircraft use - Test methods - Cross-talk |
| BS EN 3719 | 航空航天系列.電纜的鋁或鋁合金導體.產品標準 | Aluminium or aluminium alloy conductors for electrical cables — Product standard |
| BS EN 3745-511 | 航空航天系列.飛行器用光纖和光纜.試驗方法.電纜間的磨蝕 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Cable to cable abrasion |
| BS EN 4049-002 | 航空航天系列.熱電偶膨脹電纜.操作溫度在-65 °C 和260 °C之間.總則 | Thermocouple extension cable — Operating temperatures between -65 °C and 260 °C — Part 002: General |
| BS EN 4057-201 | 航空航天系列.導線電纜扎匝.試驗方法.外觀檢查 | Cable ties for harnesses — Test methods — Part 201: Visual examination |
| BS EN 4057-202 | 航空航天系列.導線電纜扎匝.試驗方法.質量和尺寸的檢查 | Cable ties for harnesses — Test methods — Part 202: Examination of mass and dimensions |
| BS EN 4057-301 | 航空航天系列.導線電纜扎匝.試驗方法.鹽霧試驗 | Cable ties for harnesses — Test methods — Part 301: Salt mist test |
| BS EN 4057-303 | 航空航天系列.導線電纜扎匝.試驗方法.防液 | Cable ties for harnesses — Test methods — Part 303: Resistance to fluids |
| BS EN 4057-305 | 航空航天系列.導線電纜扎匝.試驗方法.染色牢度 | Cable ties for harnesses -- Test methods -- Part 305: Coulor fastness?? |
| BS EN 4057-405 | 航空航天系列.導線電纜扎匝.試驗方法.羅盤安全距離 | Cable ties for harnesses — Test methods — Part 405: Compass safe distance |
| BS EN 4057-407 | 航空航天系列.導線電纜扎匝.試驗方法.使用工具調整校驗 | Cable ties for harnesses — Test methods — Part 407: Verification of application tool settings |
| BS EN 4165-013 | 航空航天系列.矩形模塊電連接器.連續操作溫度175 °C.系列2和系列3的連接器的模塊2和4的電纜夾.產品標準 | Connectors, electrical, rectangular, modular — Operating temperature 175 ℃ continuous??— Part 013: Cable clamp 2 and 4 modules for connectors, series 2 and series 3 — Product standard |
| BS EN 4434 | 航空航天系列.電纜的銅和銅合金輕型導體.產品質量（正常和緊公差） | Copper or copper alloy lightweight conductors for electrical cables — Product standard (Normal and tight tolerances) |
| BS EN 45510-2-8 | 發電站設備采購指南.電氣設備.電力電纜 | Guide for procurement of power station equipment - Electrical equipment - Power cables |
| BS EN 50083-10 | 電視和聲音信號的電纜分配系統.回程線路的系統性能 | Cabled distribution systems for television and sound signals - System performance for return paths |
| BS EN 50083-3 | 電視和聲信號用電纜分布系統.有源同軸電纜網絡的活動寬帶設備 | Cabled distribution systems for television and sound signals - Active wideband equipment for coaxial cable networks |
| BS EN 50083-4 | 電視和伴音信號的電纜配電系統.同軸電纜網絡無源寬帶設備 | Cabled distribution systems for television and sound signals - Passive wideband equipment for coaxial cable networks |
| BS EN 50083-5 | 電視和聲音信號電纜分配系統.輸入設備 | Cabled distribution systems for television and sound signals - Headend equipment |
| BS EN 50083-7 | 電視和聲信號用電纜分布系統.第7部分:系統性能 | Cabled distribution systems for television and sound signals - System performance |
| BS EN 50083-8 | 電視和音頻信號的電纜分配系統.安全性要求.網絡的電磁兼容性 | Cabled distribution systems for television and sound signals - Electromagnetic compatibility for networks |
| BS EN 50083-9 | 電視和聲信號用電纜分布系統.第9部分:CATV/SMATV 輸入端接口和DVB/MPEG-2輸送流用類似專業設備 | Cabled distribution systems for television and sound signals - Interfaces for CATV/SMATV headends and similar professional equipment for DVB/MPEG-2 transport streams |
| BS EN 50085-2-3 | 電氣裝置用電纜導管和電纜管道系統.配電箱內安裝的線槽電纜主干系統專門要求.第3節:配電箱內開槽 | Cable trunking and cable ducting systems for electrical installations - Particular requirements for slotted cable trunking systems intended for installation in cabinets - Section 3: Slotted in cabinets |
| BS EN 50090-9-1 | 家用和建筑物用電子系統.安裝要求.1類HBES雙扭線用通用電纜 | Home and building electronic systems (HBES) - Installation requirements - Generic cabling for HBES class 1 twisted pair |
| BS EN 50098-1 | 信息技術用戶室內電纜的敷設.ISDN基礎訪問 | Customer premises cabling for information technology - ISDN basic access |
| BS EN 50098-2 | 信息技術用用戶房屋電纜線路.2048kbit/s ISDN基本存取和租用專用通信網接口 | Customer premises cabling for information technology - 2048 kbit/s ISDN primary access and leased line network interface |
| BS EN 50109-1 | 手工壓接工具.低頻和射頻用電纜和電線終端壓接工具.一般要求和試驗 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - General requirements and tests |
| BS EN 50109-2-1 | 手工壓接工具.低頻和射頻用電纜和電線終端壓接工具.特殊要求.射頻連接器和同軸接觸點.有固定模開式工具,規 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Particular requirements - Radio frequency connectors and concentric contacts - Open throat tools with fixed dies, sizes A to E, V and W |
| BS EN 50109-2-2 | 手工壓接工具.低頻和射頻用電纜和電線終端壓接工具.特殊要求.射頻連接器和同軸接觸點的手工壓接工具.有可拆 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Particular requirements - Radio frequency connectors and concentric contacts - Open throat tools with removable and interchangeable dies, sizes A to G, Q to T, V and W |
| BS EN 50109-2-3 | 手動壓接工具.低頻和高頻電線和電纜壓接連接工具.第2-3部分:電器插接件觸點專門要求 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Particular requirements - Contacts of electrical connectors |
| BS EN 50109-2-4 | 手動壓接工具.低頻和高頻電線和電纜壓接連接工具.專門要求.SMZ系列高頻插接連接的中間接點專門要求 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Particular requirements - Centre contacts of RF connectors, series SMZ |
| BS EN 50109-2-5 | 手動壓接工具.低頻和高頻用電線和電纜壓接連接用工具.專門要求.數據總線用帶2個內芯的電纜連接專門要求 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Particular requirements - Termination of twin-ax cable for databus applications |
| BS EN 50117-1 | 同軸電纜.總規范 | Coaxial cables - Part 1: Generic specification |
| BS EN 50117-2-1 | 同軸電纜.電纜配電網絡用電纜分規范.在 5MHz - 1000 MHz 工作的系統用室內安裝電纜 | Coaxial cables - Part 2-1: Sectional specification for cables used in cabled distribution networks - Indoor drop cables for systems operating at 5 MHz - 1000 MHz |
| BS EN 50117-2-2 | 同軸電纜.電纜配電網絡用電纜的分規范.在5 MHz - 1000 MHz上運行的系統用室外引入電纜 | Coaxial cables - Part 2-2: Sectional specification for cables used in cabled distribution networks - Outdoor drop cables for systems operating at 5 MHz - 1000 MHz |
| BS EN 50117-2-3 | 同軸電纜.電纜配電網絡用電纜的分規范.在5 MHz - 1000 MHz上運行的系統用配電電纜和中繼電纜 | Coaxial cables - Part 2-3: Sectional specification for cables used in cabled distribution networks - Distribution and trunk cables for systems operating at 5 MHz - 1000 MHz |
| BS EN 50117-2-4 | 同軸電纜.電纜配電網絡用電纜的分規范.在5 MHz - 3000 MHz上運行的系統用室內引入電纜 | Coaxial cables - Sectional specification for cables used in cabled distribution networks - Indoor drop cables for systems operating at 5 MHz - 3000 MHz |
| BS EN 50117-2-5 | 同軸電纜.電纜配電網絡用電纜的分規范.在5 MHz - 3000 MHz上運行的系統用室外引入電纜 | Coaxial cables - Sectional specification for cables used in cabled distribution networks - Outdoor drop cables for systems operating at 5 MHz - 3000 MHz |
| BS EN 50117-3-1 | 同軸電纜.電信用電纜分規范.數字電信系統用微型化的電纜 | Coaxial cables - Sectional specifications for cables used in telecom applications - Miniaturized cables used in digital communication systems |
| BS EN 50117-3 | 電纜分布網絡中用的同軸電纜.室外接地電纜的分規范 | Coaxial cables used in cabled distribution networks - Part 3: Sectional specification for outdoor drop cables |
| BS EN 50117-4 | 電纜配電設備用同軸電纜.第4部分:配電器和線路電纜用分規范 | Coaxial cables used in cabled distribution networks - Part 4: Sectional specification for distribution and trunk cables |
| BS EN 50117-5 | 電纜配電網絡用同軸電纜.用在頻率在5MHz-2150MHz之間電網操作室內分接電纜分規范 | Coaxial cables used in cabled distribution networks - Sectional specification for indoor drop cables for use in networks operating at frequencies between 5 MHz and 2150 MHz |
| BS EN 50117-6 | 電纜配電網絡用同軸電纜.用于頻率在5MHz-2150MHz之間電網操作室外分接電纜分規范 | Coaxial cables used in cabled distribution networks - Sectional specification for outdoor drop cables for use in networks operating at frequencies between 5 MHz and 2150 MHz |
| BS EN 50143 | 空載運行電壓1k以上但不超過10k的發光管裝置和發光管設備用電纜 | Cables for signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV |
| BS EN 50146 | 電力設備用電纜連接線 | Cable ties for electrical installations |
| BS EN 50173-1 | 信息技術.通用的電纜敷設系統.一般要求和辦公區 | Information technology - Generic cabling systems - General requirements and office areas |
| BS EN 50174-1 | 信息技術.電纜裝配.規范和質量保證 | Information technology - Cabling installation - Specification and quality assurance |
| BS EN 50174-2 | 信息技術.電纜裝配.建筑物內安裝規劃和慣例 | Information technology - Cabling installation - Installation planning and practices inside buildings |
| BS EN 50174-3 | 信息技術.電纜敷設裝置.安裝計劃和和建筑物外部的實施 | Installation technology - Cabling installation - Installation planning and practices outside buildings |
| BS EN 50200 | 緊急線路用非保護型小電纜的耐火性試驗方法 | Method of test for resistance to fire of unprotected small cables for use in emergency circuits |
| BS EN 50214 | 升降機用撓性電纜 | Flexible cables for lifts |
| BS EN 50249 | 地下管道和電纜用電磁波監測器.性能和安全 | Electromagnetic locators for buried pipes and cables - Performance and safety |
| BS EN 50262 | 電氣設備用米制電纜密封裝置 | Cable glands for electrical installations |
| BS EN 50264-1 | 鐵路設施.有特殊防火性能的鐵路機車車輛電纜.標準壁厚.一般要求 | Railway applications - Railway rolling stock cables having special fire performance - Standard wall - General requirements |
| BS EN 50264-2 | 鐵路設施.有特殊防火性能的鐵路機車車輛電纜.標準壁厚.單芯電纜 | Railway applications - Railway rolling stock cables having special fire performance - Standard wall - Single core cables |
| BS EN 50264-3 | 鐵路設施.有特殊防火性能的鐵路機車車輛電纜.標準壁厚.多芯電纜 | Railway applications - Railway rolling stock cables having special fire performance - Standard wall - Multicore cables |
| BS EN 50266-1 | 著火條件下電纜通用試驗方法.垂直固定的電線束或電纜的垂直火焰擴散試驗.裝置 | Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus |
| BS EN 50266-2-1 | 著火條件下電纜的通用試驗方法.垂直固定的垂直束狀電線和電纜的垂直火焰擴散的試驗.試驗程序.類別A,F/R | Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Procedures - Category A F/R |
| BS EN 50266-2-2 | 著火條件下電纜通用試驗方法.垂直固定的電線束和或電纜的垂直火焰擴散試驗.過程.類別A | Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Procedures - Category A |
| BS EN 50266-2-3 | 著火條件下電纜通用試驗方法.垂直固定的電線束或電纜的垂直火焰擴散試驗.過程.類別B | Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Procedures - Category B |
| BS EN 50266-2-4 | 著火條件下電纜通用試驗方法.垂直固定的電線束或電纜的垂直火焰擴散試驗.過程.類別C | Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Procedures - Category C |
| BS EN 50266-2-5 | 著火條件下電纜通用試驗方法.垂直固定的電線束或電纜的垂直火焰擴散試驗.過程.小電纜.類別D | Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Procedures - Small cables - Category D |
| BS EN 50267-1 | 失火情況下電纜的一般檢驗方法.電纜材料燃燒時產生的氣體的檢驗.儀器 | Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Apparatus |
| BS EN 50267-2-1 | 燃燒情況下電纜的一般檢驗方法.電纜材料燃燒時產生的氣體的試驗.程序.鹵氫酸氣體含量的測定 | Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Procedures - Determination of the amount of halogen acid gas - Determination of the amount of halogen acid gas |
| BS EN 50267-2-2 | 燃燒情況下電纜的通用試驗方法.電纜材料燃燒時產生的氣體的試驗.程序.通過測量Ph值和傳導性測定材料燃燒產 | Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Procedures - Determination of degree of acidity of gases for materials by measuring pH and conductivity - Determination of degree of acidity of gases for materials by measuring pH and conductivity |
| BS EN 50267-2-3 | 燃燒情況下電纜的一般檢驗方法.電纜材料燃燒時產生的氣體的試驗.程序.通過測量Ph值和傳導率的加權平均值測 | Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Procedures - Determination of degree of acidity of gases for cables by determination of the weighted average of pH and conductivity - Determination of degree of acidity of gases for cables by determination of the weighted average of pH and conductivity |
| BS EN 50288-1 | 模擬和數字通訊及控制中使用的多元件金屬電纜.通用規范 | Multi-element metallic cables used in analogue and digital communication and control - Generic specification |
| BS EN 50288-2-1 | 模擬和數字通信及控制中使用的多元件金屬電纜.水平和建筑物的主電纜 | Multi-element metallic cables used in analogue and digital communication and control - Horizontal and building backbone cables - Horizontal and building backbone cables |
| BS EN 50288-2-2 | 模擬和數字通信及控制中使用的多元件金屬電纜.100MHz及以下的鎧裝電纜分規范.工作區域和臨時線路的軟線電纜 | Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for screened cables characterized up to 100 MHz - Work area and patch cord cables |
| BS EN 50288-3-1 | 模擬和數字通信及控制中使用的多元件金屬電纜.100MHz及以下的非鎧裝電纜分規范.水平和建筑物的主電纜 | Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for unscreened cables characterized up to 100 MHz - Horizontal and building backbone cables |
| BS EN 50288-3-2 | 模擬和數字通信及控制中使用的多元件金屬電纜.非屏蔽電纜分規范.工作區域和臨時線路的軟線電纜 | Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for unscreened cables - Work area and patch cord cables |
| BS EN 50288-4-1 | 模擬和數字通信及控制中使用的多元件金屬電纜.600MHz及以下的鎧裝電纜分規范.水平和建筑物的主電纜 | Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for screened cables characterized up to 600 MHz - Horizontal and building backbone cables |
| BS EN 50288-4-2 | 模擬和數字通信及控制中使用的多元件金屬電纜.600MHz及以下的屏蔽電纜分規范.工作區域和臨時線路的軟線電纜 | Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for screened cables characterized up to 600 MHz - Work area and patch cord cables |
| BS EN 50288-5-1 | 模擬和數字通信及控制中使用的多元件金屬電纜.不足250MHz的鎧裝電纜分規范.水平和建筑物主干電纜 | Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for screened cables characterized up to 250 MHz - Horizontal and building backbone cables |
| BS EN 50288-5-2 | 模擬和數字通信及控制中使用的多元件金屬電纜.250MHz及以下的鎧裝電纜分規范.工作區域和中繼電纜 | Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for screened cables characterized up to 250 MHz - Work area and patch cord cables |
| BS EN 50288-6-1 | 模擬和數字通信及控制中使用的多元件金屬電纜.250MHz及以下的非鎧裝電纜分規范.水平和建筑物主電纜 | Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for unscreened cables characterised up to 250 MHz - Horizontal and building backbone cables |
| BS EN 50288-6-2 | 模擬和數字通信及控制中使用的多元件金屬電纜.250MHz及以下的非鎧裝電纜分規范.工作區域和中繼電纜 | Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for unscreened cables characterised up to 250 MHz - Work area and patch cord cables |
| BS EN 50289-1-1 | 通信電纜.試驗方法規范.電氣試驗方法.一般要求 | Communication cables - Specifications for test methods - Electrical test methods - General requirements - General requirements |
| BS EN 50289-1-10 | 通信電纜.試驗方法規范.電氣試驗方法.串音 | Communication cables - Specifications for test methods - Electrical test methods - Crosstalk |
| BS EN 50289-1-11 | 通信電纜.試驗方法規范.電氣試驗方法.特性阻抗、輸入阻抗、回路損耗 | Communication cables - Specifications for test methods - Electrical test methods - Characteristic impedance, input impedance, return loss |
| BS EN 50289-1-12 | 通信電纜.試驗方法規范.電氣試驗方法.電感 | Communication cables - Specifications for test methods - Electrical test methods - Inductance |
| BS EN 50289-1-13 | 通信電纜.試驗方法規范.電氣試驗方法.接插線/同軸電纜配件/預連接電纜的耦合衰減或屏蔽衰減 | Communication cables - Specifications for test methods - Electrical test methods - Coupling attenuation or screening attenuation of patch cords/coaxial cable assemblies/pre-connectorised cables |
| BS EN 50289-1-14 | 通信電纜.試驗方法規范.連接硬件的耦合衰減或屏蔽衰減 | Communication cables - Specifications for test methods - Electrical test methods - Coupling attenuation or screening attenuation of connecting hardware |
| BS EN 50289-1-15 | 通信電纜.試驗方法規范.電磁性能.鏈路和信道的耦合衰減(實驗室條件) | Communication cables - Specifications for test methods - Electromagnetic performance - Coupling attenuation of links and channels (laboratory conditions) |
| BS EN 50289-1-2 | 通信電纜.試驗方法規范.電氣試驗方法.直流電阻 | Communication cables - Specifications for test methods - Electrical test methods - DC resistance - d.c.resistance |
| BS EN 50289-1-3 | 通信電纜.試驗方法規范.電氣試驗方法.介電強度 | Communication cables - Specifications for test methods - Electrical test methods - Dielectric strength - Dielectric strength |
| BS EN 50289-1-4 | 通信電纜.試驗方法規范.電氣試驗方法.耐絕緣性 | Communication cables - Specifications for test methods - Electrical test methods - Insulation resistance |
| BS EN 50289-1-5 | 通信電纜.試驗方法規范.電氣試驗方法.電容.第5節:電容 | Communication cables - Specifications for test methods - Electrical test methods - Capacitance - SEC5 : Capacitance |
| BS EN 50289-1-6 | 通信電纜.試驗方法規范.電氣試驗方法.電磁性能 | Communication cables - Specifications for test methods - Electrical test methods - Electromagnetic performance |
| BS EN 50289-1-7 | 通信電纜.試驗方法規范.電氣試驗方法.傳播速度.第7節:傳播速度 | Communication cables - Specifications for test methods - Electrical test methods - Velocity of propagation - sec7 : Velocity of propagation |
| BS EN 50289-1-8 | 通信電纜.試驗方法規范.電氣試驗方法.衰減.第8節:衰減 | Communication cables - Specifications for test methods - Electrical test methods - Attentuation - Sec8 : attentuation |
| BS EN 50289-1-9 | 通信電纜.試驗方法規范.電氣試驗方法.不平衡衰減(軸向轉換損耗,軸向轉換傳送損耗) | Communication cables - Specifications for test methods - Electrical test methods - Unbalance attenuation (longitudinal conversion loss, longitudinal conversion transfer loss) |
| BS EN 50289-3-1 | 通信電纜.試驗方法規范.機械試驗方法.一般要求 | Communication cables - Specifications for test methods - Mechanical test methods - General requirements - General requirements |
| BS EN 50289-3-10 | 通信電纜.試驗方法規范.機械試驗方法.扭轉 | Communication cables - Specifications for tests methods - Mechanical test methods - Torsion and twisting |
| BS EN 50289-3-11 | 通信電纜.試驗方法規范.機械試驗方法.電纜抗切通性 | Communication cables - Specifications for test methods - Mechanical test methods - Cable cut-through resistance |
| BS EN 50289-3-12 | 通信電纜.試驗方法規范.機械試驗方法.強迫性損傷 | Communication cables - Specifications for test methods - Mechanical test methods - Shot gun damage |
| BS EN 50289-3-13 | 通信電纜.試驗方法規范.機械試驗方法.風成振動 | Communication cables - Specifications for test methods - Mechanical test methods - Aeolian vibration |
| BS EN 50289-3-15 | 通信電纜.試驗方法規范.機械試驗方法.海底電纜耐靜水壓力 | Communication cables - Specifications for test methods - Mechanical test methods - Underwater cable resistance to hydrostatic pressure |
| BS EN 50289-3-16 | 通信電纜.試驗方法規范.機械試驗方法.電纜抗拉性能 | Communication cables - Specifications for test methods - Mechanical test methods - Cable tensile performance |
| BS EN 50289-3-17 | 通信電纜.試驗方法規范.機械試驗方法.電介質和護套的粘合性 | Communication cables - Specifications for test methods - Mechanical test methods - Adhesion of dielectric and sheath |
| BS EN 50289-3-2 | 通信電纜.試驗方法規范.機械試驗方法.導體抗拉強度和彈性 | Communication cables - Specifications for test methods - Mechanical test methods - Tensile strength and elongation for conductor |
| BS EN 50289-3-4 | 通信電纜.試驗方法規范.機械試驗方法.絕緣護套抗拉強度、彈性和收縮性 | Communication cables - Specifications for test methods - Mechanical test methods - Tensile strength, elongation and shrinkage of insulation and sheath |
| BS EN 50289-3-5 | 通信電纜.試驗方法規范.機械試驗方法.電纜抗破碎性 | Communication cables - Specifications for test methods - Mechanical test methods - Crush resistance of the cable |
| BS EN 50289-3-6 | 通信電纜.試驗方法規范.機械試驗方法.電纜抗沖擊性 | Communication cables - Specifications for test methods - Mechanical test methods - Impact resistance of the cable |
| BS EN 50289-3-7 | 通信電纜.試驗方法規范.機械試驗方法.電纜護套耐磨性 | Communication cables - Specifications for test methods - Mechanical test methods - Abrasion resistance of the cable sheath |
| BS EN 50289-3-8 | 通信電纜.試驗方法規范.機械試驗方法.電纜護套標記耐磨性 | Communication cables - Specifications for test methods - Mechanical test methods - Abrasion resistance of cable sheath markings |
| BS EN 50289-3-9 | 通信電纜.試驗方法規范.機械試驗方法.彎曲試驗 | Communication cables - Specifications for test methods - Mechanical test methods - Bending tests |
| BS EN 50289-4-1 | 通信電纜.試驗方法規范.環境試驗方法.一般要求 | Communication cables - Specifications for test methods - Environmental test methods - General requirements |
| BS EN 50289-4-11 | 通信電纜.試驗方法規范.環境試驗方法.橫向組合燃燒試驗方法 | Communication cables - Specifications for test methods - Environmental test methods - A horizontal integrated fire test method |
| BS EN 50289-4-12 | 通信電纜.試驗方法規范.環境試驗方法.小型束狀通信電纜上的垂直火焰擴散試驗 | Communication cables - Specifications for test methods - Environmental test methods - Vertical flame spread test on bunched small communication cables |
| BS EN 50289-4-14 | 通信電纜.試驗方法規范.環境試驗方法.閃電 | Communication cables - Specifications for test methods - Environmental test methods - Lightning |
| BS EN 50289-4-2 | 通信電纜.試驗方法規范.環境試驗方法.水滲透性 | Communication cables - Specifications for test methods - Environmental test methods - Water penetration |
| BS EN 50289-4-6 | 通信電纜.試驗方法規范.環境試驗方法.溫度循環 | Communication cables - Specifications for test methods - Environmental test methods - Temperature cycling |
| BS EN 50289-4-9 | 通信電纜.試驗方法規范.環境試驗方法.耐氣動性 | Communication cables - Specifications for test methods - Environmental test methods - Pneumatic resistance |
| BS EN 50290-1-1 | 通信電纜.總則 | Communication cables - General |
| BS EN 50290-1-2 | 通信電纜.定義 | Communication cables - Definitions |
| BS EN 50290-2-1 | 通信電纜.通用設計原則和結構 | Communication cables - Common design rules and construction |
| BS EN 50290-2-20 | 通信電纜.通用設計規則和制造.總則 | Communication cables - Common design rules and construction - General |
| BS EN 50290-2-21 | 通信電纜.通用設計規則和制造.PVC絕緣化合物 | Communication cables - Part 2-21: Common design rules and construction - PVC insulation compounds |
| BS EN 50290-2-22 | 通信電纜.通用設計規則和制造.PVC鎧裝化合物 | Communication cables - Part 2-22: Common design rules and construction - PVC sheathing compounds |
| BS EN 50290-2-23 | 通信電纜.通用設計規則和制造.PE絕緣材料 | Communication cables - Part 2-23: Common design rules and construction - PE insulation |
| BS EN 50290-2-24 | 通信電纜.通用設計規則和制造.聚乙烯鎧裝化合物 | Communication cables - Common design rules and construction - PE sheathing |
| BS EN 50290-2-25 | 通信電纜.通用設計規則和制造.聚丙烯絕緣化合物 | Communication cables - Common design rules and construction - Polypropylene insulation compounds |
| BS EN 50290-2-26 | 通信電纜.通用設計規則和制造.無鹵素的阻燃絕緣化合物 | Communication cables - Common design rules and construction - Halogen free flame retardant insulation compounds |
| BS EN 50290-2-27 | 通信電纜.一般設計規則和制造.無鹵素的阻燃熱塑性鎧裝化合物 | Communication cables - Common design rules and construction - Halogen free flame retardant thermoplastic sheathing compounds |
| BS EN 50290-2-28 | 通信電纜.通用設計規則和制造.填充電纜用填充化合物 | Communication cables - Common design rules and construction - Filling compounds for filled cables |
| BS EN 50290-2-29 | 通信電纜.通用設計規則和制造.交聯聚乙烯絕緣化合物 | Communication cables - Common design rules and construction - Cross-linked PE insulation compounds |
| BS EN 50290-2-30 | 通信電纜.通用設計規則和制造.聚四氟乙烯 - 聚六氟丙烯（FEP）絕緣和鎧裝化合物 | Communication cables - Common design rules and construction - Poly(tetrafluoroethylene-hexafluoropropylene) (FEP) insulation and sheathing |
| BS EN 50290-4-1 | 通信電纜.電纜使用的全面考慮.環境條件和安全 | Communication cables - General considerations for the use of cables - Environmental conditions and safety aspects |
| BS EN 50299 | UDOWNm設備的最高電壓從72.5 kV - 550 kV的變壓器和電抗器用浸油式電纜連接組件 | Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment Um from 72,5 kV to 550 kV |
| BS EN 50300 | 低壓開關裝置和控制裝置組件.低壓變電所電纜分線板的一般要求 | Low-voltage switchgear and controlgear assemblies - General requirements for low-voltage substation cable distribution boards |
| BS EN 50306-1 | 鐵路設施.有專門防火性能的鐵路機車車輛電纜.薄壁.一般要求 | Railway applications - Railway rolling stock cables having special fire performance - Thin wall - General requirements |
| BS EN 50306-2 | 鐵路設施.有專門防火性能的鐵路機車車輛電纜.薄壁.單芯電纜 | Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Single core cables |
| BS EN 50306-3 | 鐵路設施.有專門防火性能的鐵路機車車輛電纜.薄壁.單芯和多芯電纜(雙芯、三芯和四芯)的屏障及薄壁護套 | Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Single core and multicore cables (pairs, triples and quads) screened and thin wall sheathed |
| BS EN 50306-4 | 鐵路設施.有專門防火性能的鐵路機車車輛電纜.薄壁.標準壁護套的多芯和多對電纜 | Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Multicore and multipair cables standard wall sheathed |
| BS EN 50307 | 鉛和鉛合金.電纜的鉛和鉛合金護套和套管 | Lead and lead alloys - Lead and lead alloy sheaths and sleeves of electric cables |
| BS EN 50334 | 電纜芯線識別用符號標記 | Marking by inscription for the identification of cores of electric cables |
| BS EN 50336 | 不超過36kV的變壓器和電抗器電纜盒用套管 | Bushings for transformers and reactor cable boxes not exceeding 36 kV |
| BS EN 50340 | 電纜切割液壓裝置.用于公稱電壓在交流30KV以下電氣設施的電纜切割裝置 | Hydraulic cable cutting devices - Devices to be used on electrical installations with nominal voltage up to AC 30 kV |
| BS EN 50343 | 鐵路設施.鐵路車輛.電纜敷設的安裝規則 | Railway applications - Rolling stock - Rules for installation of cabling |
| BS EN 50346 | 信息技術.電纜安裝.已安裝的電纜的檢驗 | Information technology - Cabling installation - Testing of installed cabling |
| BS EN 50355 | 鐵路設施.有特殊防火效能的鐵路機車電纜.薄壁和標準壁.使用指南 | Railway applications - Railway rolling stock cables having special fire performance - Thin wall and standard wall - Guide to use |
| BS EN 50356 | 電纜的火花試驗方法 | Method for spark testing of cables |
| BS EN 50362 | 應急電路中使用的大型無防護電力電電源和控制電纜的耐火性的試驗方法 | Method of test for resistance to fire of larger unprotected power and control cables for use in emergency circuits |
| BS EN 50363-0 | 低壓電纜用絕緣、鎧裝和包覆材料.一般介紹 | Insulating, sheathing and covering materials for low voltage energy cables - General introduction |
| BS EN 50363-1 | 低壓電纜用絕緣、鎧裝和包覆材料.交聯絕緣復合物 | Insulating, sheathing and covering materials for low voltage energy cables — Part 1: Cross-linked elastomeric insulating compounds |
| BS EN 50363-2-1 | 低壓電纜用絕緣、鎧裝和包覆材料.交聯彈性鎧裝復合物 | Insulating, sheathing and covering materials for low voltage energy cables — Part 2-1: Cross-linked elastomeric sheathing compounds |
| BS EN 50363-2-2 | 低壓電纜用絕緣、鎧裝和包覆材料.交聯彈性包覆復合物 | Insulating, sheathing and covering materials for low voltage energy cables — Part 2-2: Cross-linked elastomeric covering compounds |
| BS EN 50363-3 | 低壓電纜用絕緣、鎧裝和包覆材料.PVC絕緣復合物 | Insulating, sheathing and covering materials for low voltage energy cables - Part 3: PVC insulating compounds |
| BS EN 50363-4-1 | 低壓電纜用絕緣、鎧裝和包覆材料. PVC鎧裝復合物 | Insulating, sheathing and covering materials for low voltage energy cables — Part 4-1: PVC sheathing compounds |
| BS EN 50363-4-2 | 低壓電纜用絕緣、鎧裝和包覆材料.PVC包覆復合物 | Insulating, sheathing and covering materials for low voltage energy cables — Part 4-2: PVC covering compounds |
| BS EN 50368 | 電氣裝置用電纜夾具 | Cable cleats for electrical installations |
| BS EN 50369 | 電纜管理用防水鎧裝系統 | Liquid tight sheathing systems for cable management |
| BS EN 50406-1 | 高比特率電信網絡用端用戶多組電纜.架空電纜 | End user multi-pair cables used in high bit rate telecommunication networks - Aerial cables |
| BS EN 50406-2 | 高比特率電信網絡用端用戶多組電纜.管道和地下電纜 | End user multi-pair cables used in high bit rate telecommunication networks - Duct and buried cables |
| BS EN 50407-1 | 高比特率數字存取電信網絡用多組電纜.室外電纜 | Multi-pair cables used in high bit rate digital access telecommunication networks - Outdoor cables |
| BS EN 50414 | 聚氯乙烯絕緣和護套光電纖維電纜鉛分析的試驗方法.方法A:用火焰激發原子吸收光譜測定法測定法含鉛總量測定. | Test methods for analysis of lead in PVC taken from insulation and sheath of electric and optical fibre cables - Method A: Total lead content determination with flame excitation atomic absorption spectrometry - Method B: Qualitative analysis of lead by lead sulphide staining |
| BS EN 60169-24 | 射頻連接器.帶螺旋耦合器的射頻同軸連接器(主要用于75ΩF型電纜分配系統) | Radio-frequency connectors - Radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (Type F) |
| BS EN 60169-25 | 射頻連接器.同帶有內孔的外導體內徑為13.56mm(0.534in)TWHN型雙內導體屏蔽對稱電纜一起使用的雙柱螺旋(<3/4 | Radio-frequency connectors - Two-pole screw (3/4-20 UNEF) coupled connectors for use with shielded balanced cables having twin inner conductors with inner diameter of outer conductor 13,56 mm (0,534 in) (Type TWHN) |
| BS EN 60228 | 絕緣電纜導線 | Conductors of insulated cables |
| BS EN 60230 | 電纜及其附件的脈沖試驗 | Impulse tests on cables and their accessories |
| BS EN 60332-1-1 | 著火條件下電纜和光纜的試驗.單根絕緣電線或電纜的垂直火焰蔓延的試驗.裝置 | Tests on electrical and optical cables under fire conditions - Test for a vertical flame propagation for a single insulated wire or cable - Apparatus |
| BS EN 60332-1-2 | 著火條件下電纜和光纜的試驗.單股絕緣電線或電纜的垂直火焰蔓延的試驗.1kW預混合火焰規程 | Tests on electric and optical fibre cables under fire conditions - Test for vertfical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame |
| BS EN 60332-1-3 | 著火條件下電纜和光纜的試驗.單股絕緣電線或電纜的垂直火焰蔓延的試驗.燃燒的微滴/顆粒的測定程序 | Tests on electric and optical fibre cables under fire conditions - Test for vertical flame propagation for a single vertical insulated wire or cable - Procedure for determination of flaming droplets/particles |
| BS EN 60332-2-1 | 著火條件下電纜和光纜的試驗.單根小型絕緣電線或電纜的垂直火焰蔓延的試驗.裝置 | Tests on electric and optical fibre cables under fire conditions - Test for vertical flame propagation for a single small insulated wire or cable - Apparatus |
| BS EN 60332-2-2 | 著火條件下電纜和光纜的試驗.單股絕緣電線或電纜的垂直火焰蔓延的試驗.擴散火焰法 | Tests on electric and optical fibre cables under fire conditions - Tests for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion flame |
| BS EN 60371-3-8 | 云母基絕緣材料規范.第3部分:單項材料規范.第8活頁:耐燃燒安全電纜用云母紙帶 | Specification for insulating materials based on mica - Specifications for individual materials - Mica paper tapes for flame-resistant security cables |
| BS EN 60439-5 | 低壓開關設備和控制設備組件.第5部分:室外公共場所安裝用組件專門要求.網絡電力分配電纜交接箱 | Specification for low-voltage switchgear and controlgear assemblies - Particular requirements for assemblies intended to be installed outdoors in public places - Cable distribution cabinets (CDCs) for power distribution in networks |
| BS EN 60465 | 電纜用帶油導管的未使用過的絕緣礦物油規范 | Specification for unused insulating mineral oils for cables with oil ducts |
| BS EN 60526 | 醫用X射線設備高壓電纜插頭和插座的連接 | High-voltage cable plug and socket connections for medical X-ray equipment |
| BS EN 60603-9 | 印制板用頻率低于3MHz的連接器.2.54mm(0.1in)基本網格印制電路板、底板和電纜連接器用兩件連接器 | Connectors for frequencies below 3 MHz for use with printed boards - Two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in) |
| BS EN 60702-1 | 額定電壓不超過750V的礦物絕緣電纜及其終端.電纜 | Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V. Cables |
| BS EN 60702-2 | 額定電壓不超過750V的礦物絕緣電纜及其終端.終端 | Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V. Terminations |
| BS EN 60719 | 額定電壓達450/750V(含)圓銅導線電纜平均外部尺寸上限和下限的計算 | Calculation for the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V |
| BS EN 60728-6 | 電視和聲音信號及交互服務用電纜網絡.光學設備 | Cable networks for television signals, sound signals and interactive services - Optical equipment |
| BS EN 60728-7-1 | 電視信號、聲音信號和交互信號設備用電纜網絡.混合光纖同軸電纜外部設備狀況監測.物理層(PHY)規范 | Cable networks for television signals, sound signals and interactive services - Hybrid fibre coax outside plant status monitoring - Physical (PHY) layer specification |
| BS EN 60728-7-2 | 電視信號、聲音信號和交互設備用電纜網絡.混合光纖同軸電纜外部設備狀況監測.媒體訪問控制層(MAC)規范 | Cable networks for television signals, sound signals and interactive services - Hybrid fibre coax outside plant status monitoring - Media access control (MAC) layer specification |
| BS EN 60728-7-3 | 電視信號、聲音信號和交互設備用電纜網絡.混合光纖同軸電纜外部設備狀況監測.電力轉發器接口總線(PSTIB).規 | Cable networks for television signals, sound signals and interactive services - Hybrid fibre coax outside plant status monitoring - Power supply to transponder interface bus (PSTIB) - Specification |
| BS EN 60794-1-1 | 光纖電纜.一般規范.總則 | Optical fibre cables - Generic specification - General |
| BS EN 60794-1-2 | 光學纖維電纜.總規范.基礎光纜試驗規程 | Optical fibre cables - Generic specification - Basic optical cable test procedures |
| BS EN 60794-2-11 | 光纖電纜.室內電纜.規整化布線系用單雙電纜的詳細規范 | Optical fibre cables — Part 2-11: Indoor cables — Detailed specification for simplex and duplex cables for use in premises cabling |
| BS EN 60794-2-21 | 光纜.室內光纜.房屋布線用多纖維光學配電電纜的詳細規范 | Optical fibre cables - Part 2-21: Indoor cables - Detailed specification for multi-fibre optical distribution Cables for use in premises cabling |
| BS EN 60794-2-31 | 光纜.室內光纜.房屋布線用光纖帶狀電纜的詳細規范 | Optical fibre cables - Part 2-31: Indoor cables - Detailed specification for optical fibre ribbon cables for use in premises cabling |
| BS EN 60794-3-10 | 光纖電纜.戶外電纜.導管和直接掩埋的光通信電纜的系列規范 | Optical fibre cables - Outdoor cables - Family specification for duct and directly buried optical telecommunication cables |
| BS EN 60794-3-20 | 光纜.戶外電纜.自立式架空通信光纜的系列規范 | Optical fibre cables - Outdoor cables - Family specification for optical self-supporting aerial telecommunication cables |
| BS EN 60794-3 | 光纜.分規范.戶外電纜 | Optical fibre cables - Sectional specification - Outdoor cables |
| BS EN 60811-1-1 | 電纜絕緣和護套材料.通用試驗方法.一般應用.厚度和總尺寸測量.機械性能測定試驗 | Insulating and sheathing materials of electric cables - Common test methods - General application - Measurement of thickness and overall dimensions - Tests for determining the mechanical properties - Section 1: Measurement of thickness and overall dimensions - Tests for determining the mechanical properties |
| BS EN 60811-1-2 | 電纜絕緣和護套材料通用試驗方法.第1部分:一般應用.第2節:熱老化方法 | Insulating and sheathing materials of electric cables - Common test methods - General application - Thermal ageing methods |
| BS EN 60811-1-3 | 電纜絕緣和護套材料.通用試驗方法.一般應用.密度測定方法.吸水試驗.收縮試驗 | Insulating and sheathing materials of electric cables - Common test methods - General application - Methods for determining the density - Water absorption tests - Shrinkage test - Section 3: Methods for determining the density - Water absorption tests - Shrinking test |
| BS EN 60811-1-4 | 電纜絕緣和護套材料.通用試驗方法.第1部分:一般應用方法.第4節:低溫試驗 | Insulating and sheathing materials of electric cables - Common test methods - General application - Tests at low temperature |
| BS EN 60811-2-1 | 電纜絕緣和護套材料.通用試驗方法.彈性化合物專用試驗方法.耐臭氧性、熱固化及礦物油浸漬試驗 | Insulating and sheathing materials of electric cables - Common test methods - Methods specific to elastomeric compounds - Methods specific to elastomeric compounds - Ozone resistance, hot set and mineral oil immersion tests |
| BS EN 60811-3-1 | 電纜的絕緣和護套材料.通用試驗方法.聚氯乙烯專用方法.高溫下壓力試驗.耐裂性試驗 | Insulating and sheathing materials of electric cables - Common test methods - Methods specific to PVC compounds - Pressure test at high temperature - Tests for resistance to cracking |
| BS EN 60811-3-2 | 電纜絕緣和護套材料.通用試驗方法.聚氯乙烯(PVC)化合物專用方法.質量損失試驗.熱穩定性試驗 | Insulating and sheathing materials of electric cables - Common test methods - Methods specific to PVC compounds - Loss of mass test - Thermal stability test |
| BS EN 60811-4-1 | 電纜和光纜的絕緣和護套材料.通用試驗方法.聚丙烯和聚丙烯化合物專用方法.抗環境應力致裂.熔化流動指數測量 | Insulating and sheathing materials of electric and optical cables - Common test methods - Methods specific to polypropylene and polypropylene compounds - Resistance to environmental stress cracking - Measurement of the melt flow index - Carbon black and/or mineral filter content measurement in PE by direct combustion - Measurement of carbon black content by TGA - Assessment of carbon black dispersion in polyethylene using a microscope |
| BS EN 60811-4-2 | 電纜和光纜的絕緣和護套材料.通用試驗方法.聚乙烯和聚丙烯化合物專用方法.高溫處理后抗拉強度和斷裂伸長度. | Insulating and sheathing materials of electric and optical cables - Common test methods - Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature - Wrapping test after conditioning at elevated temperature - Wrapping test after thermal ageing in air - Measurement of mass increase - Long-term stability test - Test method for copper-catalyzed oxidative degradation |
| BS EN 60811-5-1 | 電纜的絕緣和護套材料.通用試驗方法.填充復合物的專用方法.滴點.油分離.低溫脆性.總酸值.無腐蝕性成分.23℃ | Insulating and sheathing materials of electric and optical fibre cables - Common test methods - Methods specific to filling compounds - Drop point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive components - Permittivity at 23 °C - D.C. resistivity at 23 °C and 100 °C |
| BS EN 60874-17 | 光纖和電纜的連接器.纖維光學連接器的部分規范.F-05型(磨擦鎖定) | Connectors for optical fibres and cables - Sectional specification for fibre optic connector - Type F-05 (friction lock) |
| BS EN 60885-2 | 電纜的電氣試驗方法.局部放電試驗 | Electrical test methods for electric cables - Partial discharge tests |
| BS EN 60885-3 | 電纜的電氣試驗方法.測量擠壓電力電纜段局部放電的試驗方法 | Electrical test methods for electric cables - Test methods for partial discharge measurements on lengths of extruded power cables |
| BS EN 60966-1 | 射頻與同軸電纜組件.通用規范.一般要求和試驗方法 | Radio frequency and coaxial cable assemblies - Generic specification - General requirements and test methods |
| BS EN 60966-2-1 | 射頻同軸電纜組件.柔軟同軸電纜組件分規范 | Radio frequency and coaxial cable assemblies - Sectional specification for flexible coaxial cable assemblies |
| BS EN 60966-2-2 | 射頻同軸電纜組件.柔軟同軸電纜組件空白詳細規范 | Radio frequency and coaxial cable assemblies - Blank detail specification for flexible coaxial cable assemblies |
| BS EN 60966-2-3 | 射頻同軸電纜組件.柔軟同軸電纜組件詳細規范 | Radio frequency and coaxial cable assemblies - Detail specification for flexible coaxial cable assemblies |
| BS EN 60966-2-4 | 射頻和同軸電纜組件.無線電和電視接收機用0-3000MHz、使用IEC 61169-2連接器的電纜組件的詳細規范 | Radio frequency and coaxial cable assemblies - Detail specification for cable assemblies for radio and TV receivers Frequency range 0 to 3000 MHz, IEC 61169-2 connectors |
| BS EN 60966-2-5 | 射頻和同軸電纜組件.無線電和電視接收機用0-1000MHz、使用IEC 61169-2連接器的電纜組件詳細規范 | Radio frequency and coaxial cable assemblies - Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 to 1000 MHz, IEC 61169-2 connectors |
| BS EN 60966-2-6 | 射頻和同軸電纜組件.無線電和電視接收機用0-3000MHz、使用IEC61169-24連接器的電纜組件詳細規范 | Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 to 3000 MHz, IEC 61169-24 connectors |
| BS EN 60966-3-1 | 射頻同軸電纜組件.半柔軟同軸電纜組件空白詳細規范 | Radio frequency and coaxial cable assemblies - Blank detail specification for semi-flexible coaxial cable assemblies |
| BS EN 60966-3-2 | 射頻同軸電纜組件.GSM(0.8GHz-1GHz)用半柔軟同軸電纜組件詳細規范 | Radio frequency and coaxial cable assemblies - Detail specification for semi-flexible coaxial cable assemblies for GSM use (0,8 GHz - 1 GHz) |
| BS EN 60966-3 | 射頻同軸電纜組件.半柔軟同軸電纜組件分規范 | Radio frequency and coaxial cable assemblies - Sectional specification for semi-flexible coaxial cable assemblies |
| BS EN 60966-4-1 | 射頻同軸電纜組件.半硬同軸電纜組件空白詳細規范 | Radio frequency and coaxial cable assemblies - Blank detail specification for semi-rigid coaxial cable assemblies |
| BS EN 60966-4 | 射頻同軸電纜組件.半硬性同軸電纜組件分規范 | Radio frequency and coaxial cable assemblies - Sectional specification for semi-rigid coaxial cable assemblies |
| BS EN 61034-2 | 在規定條件下燃燒的電纜煙霧密度測量.試驗程序和要求 | Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements |
| BS EN 61076-3-103 | 有質量評定的直流低頻模擬及數字高速數據應用系統用連接器.矩形連接器.高速串行數據(HSSDC)用帶1.25mm間距 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Rectangular connectors - Detail specification for single row connectors with non-removable ribbon cable contacts on 1,25 mm pitch used for high speed serial data (HSSDC) |
| BS EN 61076-4-103 | 經過質量評定的直流低頻模擬及數字高速數據系統用連接器.印制電路板連接器.帶屏蔽和2.5mm基柵的兩件式連接 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Printed board connectors - Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm - Cable to board connectors, shielded against EMC ,grid 2,5 mm,for high speed data rates,for use with printed boards |
| BS EN 61076-4-108 | 電子設備連接器.經質量評定的印制板連接器.符合IEC 60917-1的基本網格為2.5mm、有25mm模數間距和集成屏蔽功 | Connectors for electronic equipment - Printed board connectors with assessed quality - Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1 |
| BS EN 61076-4-110 | 直流低頻模擬和數字高速數據設備用經質量評定的連接器.印制板連接器.2.0mm基本柵級的并具有完全屏蔽和鎖定 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Printed board connectors - Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function |
| BS EN 61076-7-001 | 電子設備連接器.電纜引出端附件.空白詳細規范 | Connectors for electronic equipment - Cable outlet accessories - Blank detail specification |
| BS EN 61138 | 便攜式接地設備和短路電流設備用電纜 | Cables for portable earthing and short-circuiting equipment |
| BS EN 61169-24 | 射頻連接器.分規范.通常用于75歐姆電纜配電系統帶螺紋連接的射頻同軸連接器(F型) | Radio-frequency connectors - Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (type F) |
| BS EN 61196-2 | 射頻電纜.規范.聚四氟乙烯(PTFE)絕緣半硬射頻同軸電纜分規范 | Radio-frequency cables - Specifications - Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation |
| BS EN 61196-3 | 射頻電纜.規范.局域網用同軸電纜分規范 | Radio-frequency cables - Specifications - Sectional specification for coaxial cables for local area networks |
| BS EN 61196-3-2 | 射頻電纜.規范.水平地面布線數字通信用同軸電纜.工作半徑為185m,每秒通過字節最高達10Mb的局域網用帶固體電 | Radio-frequency cables - Specifications - Coaxial cables for digital communication in horizontal floor wiring - Detail specification for coaxial cables with solid dielectric for local area networks of 185 m reach and up to 10 Mb/s |
| BS EN 61196-3-3 | 射頻電纜.規范.水平地面布線數字通信用同軸電纜.工作半徑為185m,每秒通過字節達10Mb的局域網用帶泡沫電介質 | Radio-frequency cables - Specifications - Coaxial cables for digital communication in horizontal floor wiring - Detail specification for coaxial cables with foamed dielectric for local area networks of 185 m reach and up to 10 Mb/s |
| BS EN 61196-4 | 同軸通信電纜.輻射電纜分規范 | Coaxial communication cables - Sectional specification for radiating cables |
| BS EN 61238-1 | 額定電壓為36KV(Um=42 kV)及以下的電力電纜用壓接和機械連接器.試驗方法和要求 | Compression and mechanical connectors for power cables for rated voltages up to 36 kV (Um = 42 kV) - Test methods and requirements |
| BS EN 61242 | 電氣附件.家用和類似用途電纜卷軸 | Electrical accessories - Cable reels for household and similar purposes |
| BS EN 61280-1-1 | 光纖放大器.基本光譜分析儀.單模光纖電纜用發射機光輸出功率測量 | Optical fibre amplifiers.Basic spectrum analyzers - Transmitter output optical power measurement for single-mode optical fibre cable |
| BS EN 61280-4-2 | 光纖通信分系統基本試驗程序.光纖電纜性能指標.單模光纖電纜性能指標的衰減 | Fibre optic communication subsystem basic test procedures - Fibre optic cable plant - Single-mode fibre optic cable plant attenuation |
| BS EN 61300-2-35 | 光纖互聯裝置和無源部件.基本試驗和測量程序.第2部分第35節:試驗.電纜下垂 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Cable nutation |
| BS EN 61300-2-37 | 光纖互聯裝置和無源部件.基本試驗和測量程序.第37節:試驗.閉路用電纜彎曲 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Cable bending for closures |
| BS EN 61300-2-4 | 光纖互聯裝置和無源部件.基本試驗和測量程序.試驗.纖維/電纜牢固性 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Fibre/cable retention |
| BS EN 61313-1 | 光纖無源部件和電纜組件.第1部分:能力鑒定.通用規范 | Fibre optic passive components and cable assemblies - Capability approval - Generic specification |
| BS EN 61316 | 工業電纜卷軸 | Industrial cable reels |
| BS EN 61386-1 | 電纜管理的導管系統.通用要求 | Conduit systems for cable management - General requirements |
| BS EN 61386-21 | 電纜管理用導管系統.特殊要求.剛性導管系統 | Conduit systems for cable management - Particular requirements - Rigid conduit systems |
| BS EN 61386-22 | 電纜管理用導管系統.特殊要求.可彎曲的導管系統 | Conduit systems for cable management - Particular requirements - Pliable conduit systems |
| BS EN 61386-23 | 電纜管理用導管系統.特殊要求.撓性導管系統 | Conduit systems for cable management - Particular requirements - Flexible conduit systems |
| BS EN 61442 | 額定電壓6-36kV(Um=7.2-42kV)的電力電纜附件的試驗方法 | Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 36 kV (Um = 42 kV) |
| BS EN 61515 | 礦物絕緣熱電偶電纜和熱電偶 | Mineral insulated thermocouple cables and thermocouples |
| BS EN 61537 | 電纜管理用電纜槽系統和電纜梯架系統 | Cable tray systems and cable ladder systems for cable management |
| BS EN 61726 | 電纜組件、電纜、連接器和無源微波元件.用混響室法測量濾屏衰減 | Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method |
| BS EN 61935-1 | 根據EN 50173標準系列:已安裝電纜的規定對對稱通信布線進行檢驗 | Testing of balanced communication cabling in accordance with standards series EN 50173 — Part 1: Installed cabling |
| BS EN 61935-2 | 根據EN 50173標準系列:接線電纜和工作區電纜規定對對稱通信布線進行檢驗 | Testing of balanced communication cabling in accordance with standards series EN 50173 — Part 2: Patch cords and work area cords |
| BS EN 62012-1 | 在條件惡劣環境中數字通信用兩芯/四芯電纜.總規范 | Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments - Generic specification |
| BS EN 62037 | 射頻連接器.連接器電纜組件和電纜.互調電平測量 | RF connectors, connector cable assemblies and cables - Intermodulation level measurement |
| BS EN 62153-1-1 | 金屬通信電纜試驗方法.電氣.用離散傅里葉逆變換測量頻域中的脈沖/分步回程損失 | Metallic communication cables test methods - Electrical - Measurement of the pulse/step return loss in the frequency domain using the inverse discrete fourier transformation(IDFT) |
| BS EN 62153-4-2 | 金屬通信電纜試驗方法.電磁兼容性(EMC).屏蔽和耦合衰減.注入夾緊法 | Metallic communication cable test methods - Electromagnetic compatibility - Screening and coupling attenuation - Injection clamp method |
| BS EN ISO 10807 | 管道工程.在爆燃性大氣中電纜保護用皺紋軟金屬管組件 | Pipework - Corrugated flexible metallic hose assemblies for the protection of electrical cables in explosive atmosphere |
| BS EN ISO 5828 | 電阻焊設備.連接水冷接頭的二次接線電纜.尺寸和特性 | Resistance welding equipment - Secondary connecting cables with terminals connected to water-cooled lugs - Dimensions and characteristics |
| BS EN ISO 6551 | 石油液體和氣體.動態測量的精確性可靠性.電脈沖數據和/或電子脈沖數據的電纜傳輸 | Petroleum liquids and gases - Fidelity and security of dynamic measurement - Cabled transmission of electric and/or electronic pulsed data |
| BS EN ISO 8205-1 | 電阻焊用水冷輔助連接電纜.雙芯連接電纜的尺寸和要求 | Water-cooled secondary connection cables for resistance welding - Dimensions and requirements for double-conductor connection cables |
| BS EN ISO 8205-2 | 電阻焊用水冷輔助連接電纜.單芯連接電纜的尺寸和要求 | Water-cooled secondary connection cables for resistance welding - Dimensions and requirements for single-conductor connection cables |
| BS EN ISO 8205-3 | 電阻焊接水冷次級線圈連接電纜.試驗要求 | Water-cooled secondary connection cables for resistance welding - Test requirements |
| BS G 177 | 飛行器用Nyvin 型電纜規范 | Specification for Nyvin type electrical cables for aircraft |
| BS G 184 to G 188 | 航空用六角形壓合鋁制電纜的鋁接線板端頭和嵌入式連接器規范 | Specification for aluminium terminal ends and in-line connectors for hexagonal crimping to aircraft aluminium electrical cables |
| BS G 189 | 航空用Tersil型電纜規范 | Specification for Tersil type electrical cables for aircraft |
| BS G 192 | 航空用銅導線Efglas型電纜規范 | Specification for Efglas type electric cables with copper conductors for aircraft |
| BS G 195 | 航空用Minyvin型電纜規范 | Specification for Minyvin type electric cables for aircraft |
| BS G 198-5 | 航空用電纜和設備電線套筒.熱收縮模型規范 | Sleeves for aircraft electric cables and equipment wires - Specification for heat shrinkable moulded shapes |
| BS G 212 | 航空用電纜的一般要求規范 | Specification for general requirements for aircraft electrical cables |
| BS G 222 | Efglas型電纜規范(公制單位) | Specification for Efglas type electric cables (metric units) |
| BS G 227 | Tersil型電纜規范(公制單位) | Specification for Tersil type electric cables (metric units) |
| BS G 235 | 一般機體或設備連接用鍍銀導體的150℃捆扎絕緣電纜規范 | Specification for electric cables for general airframe or equipment interconnect use (150 °C), wrapped insulation with silver plated conductors |
| BS G 236 | 一般機體或設備連接用鍍鎳導體的200℃捆扎絕緣電纜規范 | Specification for electric cables for general airframe or equipment interconnect use (200 °C), wrapped insulation with nickel plated conductors |
| BS G 237 | 一般機體或設備連接用鍍鎳導體的200℃擠制絕緣電纜規范 | Specification for electric cables for general airframe or equipment interconnect use (200 °C), extruded insulation with nickel plated conductors |
| BS G 241 | 發動機防火區和機體用耐火電纜規范 | Specification for fire proof electric cables for engine fire zone and airframe use |
| BS G 243 | 發動機用點火電纜規范(4kV直流) | Specification for igniter cables for engine use (4 kV d.c.) |
| BS G 246 | 航空用張力控制下電纜連接電纜配線規范 | Specification for cable ties for installation under controlled tension on aircraft electric cable harnesses |
| BS G 250 | 電纜的識別標記規范 | Specification for identification marking of electric cables |
| BS G 258 | 電纜和電纜線術語詞匯 | Glossary of terms for electrical cables and cable harnesses |
| BS IEC 60287-1-3 | 電纜.電流定額的計算.電流定額公式(100%負載因數)和損耗的計算.并聯單芯電纜間的電流分配和環流損耗的計算 | Electric cables - Calculation of the current rating - Current rating equations (100 % load factor) and calculation of losses - Current sharing between parallel single-core cables and calculation of circulating current losses |
| BS IEC 60313 | 核實驗室儀器用的同軸電纜連接器 | Coaxial connectors used in nuclear laboratory instrumentation |
| BS IEC 60853-3 | 電纜周期性和事故電流定額計算.不完全干燥土壤的一切電壓電纜用周期定額因數 | Calculation of the cyclic and emergency current rating of cables - Cyclic rating factor for cables of all voltages, with partial drying of the soil |
| BS IEC 60874-14-1 | 光纖和電纜連接器.連接A1a,A1b型多模式纖維的SC-PC型標準光纖連接器的詳細規范 | Connectors for optical fibres and cables - Detail specification for fibre optic connector type SC-PC standard terminated to multimode fibre type A1a, A1b |
| BS IEC 61000-5-2 | 電磁兼容性.安裝和緩解指南.接地和電纜敷設 | Electromagnetic compatibility (EMC) - Installation and mitigation guidelines - Earthing and cabling |
| BS ISO 13990-3 | 紡織機械與附件.針織機用輸紗器和紗控制器.連接尺寸和互連電纜 | Textile machinery and accessories - Yarn feeders and yarn control for knitting machines - Dimensions for connecting and interconnection cables |
| BS ISO 3808 | 道路車輛.無屏蔽高電壓點火電纜.總規范、試驗方法和要求 | Road vehicles - Unscreened high-voltage ignition cables - General specifications, test methods and requirements |
| BS ISO 4141-1 | 道路車輛.多芯連接電纜.基本性能鎧裝電纜的試驗方法和要求 | Road vehicles - Multi-core connecting cables - Test methods and requirements for basic performance sheathed cables |
| BS ISO 6856 | 道路車輛.非屏蔽高壓點火電纜組件.試驗方法和一般要求 | Road vehicles - Unscreened high-voltage ignition cable assemblies - Test methods and general requirements |
| BS ISO/IEC 11458 | 信息技術.微處理器系統.VIC母線.內插件電纜母線 | Information technology. Microprocessor systems. VICbus. Inter-crate cable bus |
| BS ISO/IEC 14709-1 | 信息技術.顧客房屋電纜應用布局.綜合服務數字網絡（ ISDN ）基本通路 | Information technology - Configuration of customer premises cabling (CPC) for applications - ISDN basic access |
| BS QC 221300 | 射頻連接器.外導體的內徑為3mm(0.12in),搭鎖固定的特性阻抗為50Ω的射頻同軸電纜連接器(SMB型) | Radio-frequency connectors - RF coaxial connectors with inner diameter of outer conductor 3 mm (0,12 in) with snap-on coupling - Characteristic impedance 50 ohms (Type SMB) |
| DD ENV 13149-2 | 公共運輸.道路車輛調度安排和控制系統.WORLDFIP敷設電纜規范 | Public transport. Road vehicle scheduling and control systems. WORLDFIP cabling specifications |
| DD IEC PAS 62255-1 | 高比特率數字接入電信網絡用多對電纜.戶外電纜 | Multi-pair cables used in high bit rate digital access telecommunication networks. Outdoor Cables |
| FD Z 86-154 | 數字視頻廣播.MPEG-2系統的使用執行指南.衛星和電纜廣播用的視頻和音頻 | DIGITAL VIDEO BROADCASTING (DVB). IMPLEMENTATION GUIDELINES FOR THE USE OF MPEG-2 SYSTEMS. VIDEO AND AUDIO IN SATELLITE AND CABLE BROADCASTING APPLICATIONS. |
| KIT 79 | 信息技術.電纜敷設裝置 | Information technology - Cabling systems pack |
| PD 6580-2 | 住房和建筑物的電氣系統.技術報告1.1類雙芯電纜專用設備指南 | Home and building electronic systems.Technical report 1. Guidelines for the professional installation of Twisted Pair cables class 1 |
| 編號 | 中文名稱 | 英文名稱 |