微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| BS 10 | 管子、閥門和配件用法蘭和螺栓連接規范 | Specification for flanges and bolting for pipes, valves, and fittings |
| BS 1010-2 | 供水設備(旋壓式)用放水旋閥和截止閥規范.第2部分:放水旋閥和地面上截止閥 | Specification for draw-off taps and stopvalves for water services (screw-down pattern) - Draw-off taps and above-ground stopvalves |
| BS 1212-1 | 浮子閥.第1部分:活塞式浮子閥(銅合金閥體)(不含浮子)規范 | Float operated valves - Specification for piston type float operated valves (copper alloy body) (excluding floats) |
| BS 1212-2 | 浮子閥.第2部分:隔膜式浮子閥(銅合金閥體)(不含浮子)規范 | Float operated valves - Specification for diaphragm type float operated valves (copper alloy body) (excluding floats) |
| BS 1212-3 | 浮子閥.第3部分:僅供冷水用隔膜型塑料體浮子操作閥(不包括浮子) | Float operated valves - Specification for diaphragm type float operated valves (plastics bodied) for cold water services only (excluding floats) |
| BS 1212-4 | 浮子閥.第4部分:廁所沖水箱用小型浮子閥規范(包含浮子) | Float operated valves - Specification for compact type float operated valves for WC flushing cisterns (including floats) |
| BS 1552 | 壓力可達200毫巴家庭用一類、二類和三類燃?xì)獬诘撞垮F形旋塞閥規范 | Specification for open bottomed taper plug valves for 1st, 2nd and 3rd family gases up to 200 mbar |
| BS 1560-3.2 | 管子、閥門和接頭(規定等級)用圓法蘭.第3部分:鋼、鑄鐵和銅合金法蘭.第2節:鑄鐵法蘭規范 | Circular flanges for pipes, valves and fittings (Class designated) - Steel, cast iron and copper alloy flanges - Specification for cast iron flanges |
| BS 1655 | 過程控制工業用法蘭連接自動控制閥(面至面尺寸)規范 | Specification for flanged automatic control valves for the process control industry (face-to-face dimensions) |
| BS 1868 | 石油、石化及聯合企業用鋼制單向閥(有法蘭及對焊端)規范 | Specification for steel check valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries |
| BS 1873 | 石油、石化及有關工業用鋼球形閥、球形截止閥與單向閥(有法蘭及對接焊端)規范 | Specification for steel globe and globe stop and check valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries |
| BS 1968 | 球閥用浮球(銅)規范 | Specification for floats for ballvalves (copper) |
| BS 2456 | 冷水設備用浮子操作閥的浮子(塑料制品)規范 | Specification for floats (plastics) for float operated valves for cold water services |
| BS 2767 | 散熱器用手動控制銅合金閥的規范 | Specification for manually operated copper alloy valves for radiators |
| BS 2782-11 Method 1108A | 塑料試驗方法.第11部分:熱塑性塑料管、接頭和閥門.試驗方法1108A:管界面限定碰撞率 | Methods of testing plastics - Thermoplastics pipes, fittings and valves - True impact rate (TIR) boundaries of pipes |
| BS 2782-11 Method 1109A | 塑料試驗方法.第11部分:熱塑性塑料、接頭和閥門.試驗方法1109A:非承壓聚乙烯管和接頭耐壞境應力開裂性 | Methods of testing plastics - Thermoplastics pipes, fittings and valves - Resistance to environmental stress cracking of polyethylene pipes and fittings for non-pressure applications |
| BS 2782-11 Method 1110 | 塑料試驗方法.第11部分:熱塑性塑料管、接頭和閥門.試驗方法1110:非承壓聚氯乙烯槽形管啞鈴狀試樣的抗拉性能 | Methods of testing plastics - Thermoplastics pipes, fittings and valves - Tensile properties of dumb-bell specimens from PVC gutter profiles of pipes for non-pressure applications |
| BS 2782-11 Method 1121B | 塑料的試驗方法.第11部分:熱塑管、接頭和閥門.流體輸送用熱塑管.試驗方法1121B:額定外部直徑和額定壓力.米 | Methods of testing plastics - Thermoplastics pipes, fittings and valves - Thermoplastics pipes for the conveyance of fluids - Nominal outside diameters and nominal pressures - Metric series |
| BS 2782-11 Method 1121C | 塑料試驗方法.第11部分:熱塑管、接頭和閥門.流體輸送用熱塑管.試驗方法1121C:額定外部直徑和額定壓力.英尺 | Methods of testing plastics - Thermoplastics pipes, fittings and valves - Thermoplastics pipes for the conveyance of fluids - Nominal outside diameters and nominal pressures - Inch-based series |
| BS 2782-11 Method 1121H | 塑料試驗方法.第11部分:熱塑性塑料管、接頭和閥門.試驗方法1121H:非承壓液體輸送熱塑性塑料管.管頭損失計算 | Methods of testing plastics - Thermoplastics pipes, fittings and valves - Thermoplastics pipes for the transport of liquids under pressure - Calculation of head losses |
| BS 2782-11 Method 1127P | 塑料試驗方法.第11部分:熱塑管,接頭和閥門.液體輸送用熱塑材管.試驗方法1127P:抗內壓力.試驗方法 | Methods of testing plastics - Thermoplastics pipes, fittings and valves - Thermoplastics pipes, for the conveyance of fluids - Resistance to internal pressure - Test method |
| BS 2782-11 Method 1150B | 塑料試驗方法.第11部分:熱塑管,接頭和閥門.塑料管道和配件.試驗方法1150D:對接熔融法聚乙烯(PE)管/管或管道 | Methods of testing plastics - Thermoplastics pipes, fittings and valves - Plastics pipes and fittings - Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion |
| BS 2782-11 Method 1150E | 塑料試驗方法.第11部分:熱塑性塑料管,接頭和閥門.試驗方法1150E:塑料管和配件.聚乙烯管和電熔融接頭間試件 | Methods of testing plastics - Thermoplastics pipes, fittings and valves - Plastics pipes and fittings - Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting |
| BS 2S 111 | 飛機材料規范.鎳鉻鎢閥門鋼 | Specification for aircraft material - Nickel-chromium-tungsten valve steel |
| BS 341-3 | 可運輸氣體容器的閥門.閥門出口接頭 | Transportable gas container valves - Valve outlet connections |
| BS 341-4 | 可運輸氣體容器的閥門.減壓裝置 | Transportable gas container valves - Pressure relief devices |
| BS 3457 | 水龍頭與截止閥座墊圈材料規范 | Specification for materials for water tap and stopvalve seat washers |
| BS 3727-1 | 電子管和電子閥用鎳的分析方法.第1部分:鋁含量測定(光度測量法) | Methods for the analysis of nickel for use in electronic tubes and valves - Determination of aluminium (photometric method) |
| BS 3727-10 | 電子管和電子閥用鎳的分析方法.第10部分:0.020-0.25％硅含量測定(光度測量法) | Methods for the analysis of nickel for use in electronic tubes and valves - Determination of silicon 0.020-0.25 per cent (photometric method) |
| BS 3727-11 | 電子管和電子閥用鎳的分析方法.第11部分:0.001-0.020％硅含量測定(光度測量法) | Methods for the analysis of nickel for use in electronic tubes and valves - Determination of silicon 0.001-0.020 per cent (photometric method) |
| BS 3727-12 | 電子管和電子閥用鎳的分析方法.硫含量測定(燃燒法) | Methods for the analysis of nickel for use in electronic tubes and valves - Determination of sulphur (combustion method) |
| BS 3727-13 | 電子管和電子閥用鎳的分析方法.第13部分:鈦含量測定(光度測量法) | Methods for the analysis of nickel for use in electronic tubes and valves - Determination of titanium (photometric method) |
| BS 3727-14 | 電子管和電子閥用鎳的分析方法.第14部分:鎢含量測定(重量法) | Methods for the analysis of nickel for use in electronic tubes and valves - Determination of tungsten (gravimetric method) |
| BS 3727-15 | 電子管和電子閥用鎳的分析方法.第15部分:鋅含量測定(光度測量法) | Methods for the analysis of nickel for use in electronic tubes and valves - Determination of zinc (photometric method) |
| BS 3727-16 | 電子管和電子閥用鎳的分析方法.第16部分:化合鎂和游離鎂含量測定 | Methods for the analysis of nickel for use in electronic tubes and valves - Determination of combined and free magnesium |
| BS 3727-2 | 電子管和電子閥用鎳的分析方法.第2部分:硼含量測定(光度測量法) | Methods for the analysis of nickel for use in electronic tubes and valves - Determination of boron (photometric method) |
| BS 3727-20 | 電子管和電子閥用鎳的分析方法.第20部分:光譜法 | Methods for the analysis of nickel for use in electronic tubes and valves - Spectrographic method |
| BS 3727-21 | 電子管和電子閥用鎳的分析方法.第21部分:鎂含量測定(原子吸收法) | Methods for the analysis of nickel for use in electronic tubes and valves - Determination of magnesium (atomic absorption method) |
| BS 3727-3 | 電子管和電子閥用鎳的分析方法.第3部分:碳含量測定 | Methods for the analysis of nickel for use in electronic tubes and valves - Determination of carbon |
| BS 3727-4 | 電子管和電子閥用鎳的分析方法.第4部分:鉻含量測定(光度測量法) | Methods for the analysis of nickel for use in electronic tubes and valves - Determination of chromium (photometric method) |
| BS 3727-5 | 電子管和電子閥用鎳的分析方法.第5部分:鈷含量測定(光度測量法) | Methods for the analysis of nickel for use in electronic tubes and valves - Determination of cobalt (photometric method) |
| BS 3727-6 | 電子管和電子閥用鎳的分析方法.第6部分:銅含量測定(光度測量法) | Methods for the analysis of nickel for use in electronic tubes and valves - Determination of copper (photometric method) |
| BS 3727-7 | 電子管和電子閥用鎳的分析方法.第7部分:鐵含量測定(光度測量法) | Methods for the analysis of nickel for use in electronic tubes and valves - Determination of iron (photometric method) |
| BS 3727-8 | 電子管和電子閥用鎳的分析方法.第8部分:錳含量測定(光度測量法) | Methods for the analysis of nickel for use in electronic tubes and valves - Determination of manganese (photometric method) |
| BS 3727-9 | 電子管和電子閥用鎳的分析方法.第9部分:鎂含量測定(光度測量法) | Methods for the analysis of nickel for use in electronic tubes and valves - Determination of magnesium (photometric method) |
| BS 4062-2 | 液壓動力系統閥門.第2部分:性能測定方法 | Valves for hydraulic fluid power systems - Methods for determining performance |
| BS 4151 | 輸入信號為 3至15磅/平方英寸(壓力計)的氣動閥定位器的評定方法 | Method of evaluating pneumatic valve positioners with input signal of 3 to 15 lbf/in2 (gauge) |
| BS 4319-1 | 電子管和電子閥(包括微波器件)電氣特性測量方法.第1部分:測量等效輸入和輸出導納的基本條件 | Methods of measurement of the electrical properties of electronic tubes and valves (excluding microwave devices) - Essential conditions for measuring equivalent input and output admittances |
| BS 5041-1 | 消防栓系統設備.第1部分:濕式水嘴接地閥規范 | Fire hydrant systems equipment - Specification for landing valves for wet risers |
| BS 5041-2 | 消防栓系統設備.第2部分:干式水嘴接地閥規范 | Fire hydrant systems equipment - Specification for landing valves for dry risers |
| BS 5041-4 | 消防栓系統設備.第4部分:干式水嘴用接地閥箱規范 | Fire hydrant systems equipment - Specification for boxes for landing valves for dry risers |
| BS 5158 | 鑄鐵旋塞閥規范 | Specification for cast iron plug valves |
| BS 5159 | 通用鑄鐵和碳鋼球閥規范 | Specification for cast iron and carbon steel ball valves for general purposes |
| BS 5163-1 | 水廠用閥.主要鍵操作的鑄鐵閘閥.操作規范 | Valves for waterworks purposes - Predominantly key-operated cast iron gate valves - Code of practice |
| BS 5163-2 | 水廠用閥.隔離閥和相關控水設備用船首柱冠板.規范 | Valves for waterworks purposes - Stem caps for use on isolating valves and associated water control apparatus - Specification |
| BS 5353 | 鋼塞閥規范 | Specification for steel plug valves |
| BS 5433 | 供水用地下閘閥規范 | Specification for underground stopvalves for water services |
| BS 5672 | 往復式內燃機汽缸頭的汽缸和閥旋轉方向標示和左、右單列發動機定義的規范 | Specification for designation of the direction of rotation and of cylinders and valves in cylinder heads, and definition of right-hand and left-hand in-line engines and locations on an engine for reciprocating internal combustion engines |
| BS 5793-4 | 工業過程控制閥.第4部分:檢驗和例行試驗規范 | Industrial-process control valves - Specification for inspection and routine testing |
| BS 5944-4 | 液壓動力系統和部件空氣噪音測量.第4部分:流量和壓力控制閥聲功率級測定方法 | Measurement of airborne noise from hydraulic fluid power systems and components - Method of determining sound power levels from valves controlling flow and pressure |
| BS 5998 | 鋼閥鑄件的質量級規范 | Specification for quality levels for steel valve castings |
| BS 6023 | 自動疏水閥的技術術語詞匯 | Glossary of technical terms for automatic steam traps |
| BS 6282-1 | 防止回流水污染用帶動件裝置.第1部分:公稱尺寸小于等于DN54的單向閥規范 | Devices with moving parts for the prevention of contamination of water by backflow - Specification for check valves of nominal size up to and including DN 54 |
| BS 6282-2 | 防止回流水污染用帶動件裝置.第2部分:公稱尺寸小于等于DN54的終端反壓力閥規范 | Devices with moving parts for the prevention of contamination of water by backflow - Specification for terminal anti-vacuum valves of nominal size up to and including DN 54 |
| BS 6282-4 | 防止回流水污染用帶動件裝置.第4部分:公稱尺寸小于等于DN42的組合單向閥和反壓力閥規范 | Devices with moving parts for the prevention of contamination of water by backflow - Specification for combined check and anti-vacuum valves of nominal size up to and including DN 42 |
| BS 6283-2 | 熱水系統安全控制裝置.第2部分:壓力范圍從1bar到10bar的溫度減壓閥規范 | Safety and control devices for use in hot water systems - Specifications for temperature relief valves for pressures from 1 bar to 10 bar |
| BS 6283-4 | 熱水系統中安全控制裝置.第4部分:最大供給壓力不超過12bar、標準尺寸不超過DN50的放松減壓閥規范 | Safety and control devices for use in hot water systems - Specification for drop-tight pressure reducing valves of nominal size up to and including DN 50 for supply pressures up to and including 12 bar |
| BS 6290-4 | 鉛酸固定電池和電池組.閥門調節類型分類規范 | Lead-acid stationary cells and batteries - Specification for classifying valve regulated types |
| BS 6364 | 制冷設備用閥門規范 | Specification for valves for cryogenic service |
| BS 6675 | 供水設備用供水閥門(銅合金)規范 | Specification for servicing valves (copper alloy) for water services |
| BS 6683 | 閥門安裝和使用指南 | Guide to installation and use of valves |
| BS 7016-3 | 往復式內燃機部件和系統.第3部分:閥門、凸輸軸傳動和驅動機構的術語詞匯 | Components and systems of reciprocating internal combustion engines - Glossary of terms for valves, camshaft drive and actuating mechanisms |
| BS 7296-1 | 液壓動力卡盤式閥的空腔.第1部分:二通鑲套滑動閥規范 | Cavities for hydraulic fluid power cartridge valves - Specification for two-port slip-in valves |
| BS 7350 | 加熱和冷卻水系統用雙調節球形閥和流量測量裝置規范 | Specification for double regulating globe valves and flow measurement devices for heating and chilled water systems |
| BS 7403-2 | 內燃機滿液流潤滑油過濾器.元件分支閥特性試驗方法 | Full-flow lubricating oil filters for internal combustion engines - Method of test for element by-pass valve characteristics |
| BS 7403-9 | 內燃機用全流式潤滑油過濾器.入口和出口防泄油閥試驗方法 | Full-flow lubricating oil filters for internal combustion engines - Method of test for inlet and outlet anti-drain valves |
| BS 7438 | 彈簧加載型鋼和銅合金單盤壓片止回閥規范 | Specification for steel and copper alloy wafer check valves, single-disk, spring-loaded type |
| BS 7461 | 裝有流量調節器、閉路開關檢驗、閉合位置指示開關或氣流量控制器電動式氣體自動關閉閥規范 | Specification for electrically operated automatic gas shut-off valves fitted with throughput adjusters, proof of closure switches, closed position indicator switches or gas flow control |
| BS 7478 | 恒溫散熱器閥的選擇和使用指南 | Guide to selection and use of thermostatic radiator valves |
| BS 759-1 | 鍋爐與鍋爐連接管路用閥門、水位計及其它安全管件.第1部分:閥門、安裝件和管件規范 | Valves, gauges and other safety fittings for application to boilers and to piping installations for and in connection with boilers - Specification for valves, mountings and fittings |
| BS 7942 | 檢修機構用恒溫混合閥 | Thermostatic mixing valves for use in care establishments |
| BS AU 50-3.1e | 輪胎和車輪.閥門.尺寸、名稱與符號、使用中閥門壓力等級和夾緊閥門扭矩 | Tyres and wheels - Valves - Dimensions, designation, valve pressure ratings by use and torque for clamp-in valves |
| BS C 22 | 航空用內胎輪胎和無內胎輪胎閥的試驗方法.氣門芯和帽 | Test methods for aircraft inner tube and tubeless tyre valves - Cores and caps |
| BS C 9 | 航空用高壓充氣閥連接尺寸規范 | Specification for coupling dimensions for high pressure air charging valves for aircraft |
| BS EN 10090 | 內燃機用閥門鋼和合金 | Valve steels and alloys for internal combustion engines |
| BS EN 1074-1 | 供水用閥門.對目的要求的符合性及合適的驗證試驗.一般要求 | Valves for water supply - Fitness for purpose requirements and appropriate verification tests - General requirements |
| BS EN 1074-2 | 供水用閥門.對目的要求的符合性及合適的驗證試驗.截止閥 | Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Isolating valves |
| BS EN 1074-3 | 供水用閥門.對目的要求的符合性及合適的驗證試驗.止回閥 | Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Check valves |
| BS EN 1074-4 | 供水系統用的閥門.產品與用途要求的適用性和合適的驗證試驗.空氣閥 | Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Air valves |
| BS EN 1074-5 | 供水閥門.與用途要求的適用性和合適的驗證試驗.控制閥門 | Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Control valves |
| BS EN 1074-6 | 供水用閥門.目的要求和適當檢定試驗的合理性.給水栓 | Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Hydrants |
| BS EN 1092-1 | 法蘭及其連接.按PN標示的管、閥門、配件和附件用的圓形法蘭.鋼法蘭 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Steel flanges |
| BS EN 1092-2 | 法蘭及其連接.按PN標注的管、閥門、管接頭和附件的圓形安裝法蘭.第2部分:鑄鐵法蘭 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Cast iron flanges |
| BS EN 1092-3 | 法蘭及其連接件.標注PN的管道、閥門、配件和附件用圓形法蘭.銅合金法蘭 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Copper alloy flanges |
| BS EN 1092-4 | 法蘭及其連接件.按PN標注的管道、閥門、配件和附件用圓形法蘭.鋁合金法蘭 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Aluminium alloy flanges |
| BS EN 1111 | 衛生用具龍頭.恒溫混合閥(PN10).一般技術規范 | Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification |
| BS EN 1171 | 工業閥門.鑄鐵閘閥 | Industrial valves - Cast iron gate valves |
| BS EN 12050-4 | 建筑物和工地用廢水處理設備.施工和試驗規則.不含糞便和含有糞便的廢水用止回閥 | Wastewater lifting plants for buildings and sites - Principles of construction and testing - Non-return valves for faecal-free wastewater and wastewater containing faecal matter |
| BS EN 12094-13 | 固定消防系統.氣體滅火系統元件.止回閥和非止回閥試驗方法和要求 | Fixed firefighting systems - Components for gas extinguishing systems - Requirements and test methods for check valves and non-return valves |
| BS EN 12094-4 | 固定式消防系統.氣體滅火系統用元件.容器閥組件及其傳動器的要求和試驗方法 | Fixed firefighting systems - Components for gas extinguishing systems - Requirements and test methods for container valve assemblies and their actuators |
| BS EN 12100 | 塑料管道系統.聚乙稀(PE)閥門.閥座間抗彎曲性的試驗方法 | Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports |
| BS EN 12106 | 塑料管道系統.聚乙稀(PE)閥門.擠壓后抗內壓力的試驗方法 | Plastics piping systems - Polyethylene (PE) pipes - Test method for the resistance to internal pressure after application of squeeze-off |
| BS EN 12107 | 塑料管道系統.注射模塑熱塑性塑料管件、閥門和輔助設備.注射模塑管道元件用熱塑性材料的長期液壓強度的測定 | Plastics piping systems - Injection-moulded thermoplastics fittings, valves and ancillary equipment - Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components |
| BS EN 12117 | 塑料管道系統.管件、閥門和附件.氣體流速與壓降之間關系的測定 | Plastics piping systems - Fittings, valves and ancillaries - Determination of gaseous flow rate/pressure drop relationships |
| BS EN 12119 | 塑料管道系統.聚乙烯(PE)閥.耐力熱循環抗性的測試方法 | Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to thermal cycling |
| BS EN 1213 | 建筑物閥門.建筑物內飲水供水用的銅合金斷流閥.試驗和要求 | Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements |
| BS EN 12201-4 | 供水用塑料管道系統.聚乙烯.閥門 | Plastic piping systems for water supply - Polyethylene (PE) - Valves |
| BS EN 12259-2 | 固定滅火系統.噴灑器和噴水系統元部件.報警濕閥組件 | Fixed firefighting systems - Components for sprinkler and water spray systems - Wet alarm valve assemblies |
| BS EN 12259-3 | 固定滅火系統.噴灑器和噴水系統用元部件.報警干閥組件 | Fixed firefighting systems - Components for sprinkler and water spray systems - Dry alarm valve assemblies |
| BS EN 12266-1 | 工業用閥門.閥門試驗.壓力試驗、試驗規程和驗收標準.強制要求 | Industrial valves - Testing of valves - Pressure tests, test procedures and acceptance criteria - Mandatory requirements |
| BS EN 12266-2 | 工業用閥門.閥門試驗.試驗、試驗規程和驗收標準.補充要求 | Industrial valves - Testing of valves - Tests, test procedures and acceptance criteria - Supplementary requirements |
| BS EN 12284 | 冷卻系統和加熱泵.閥.要求、試驗及標記 | Refrigerating systems and heat pumps - Valves - Requirements, testing and marking |
| BS EN 12288 | 工業用閥.銅合金閘閥 | Industrial valves - Copper alloy gate valves |
| BS EN 12334 | 工業閥門.鑄鐵單向閥門 | Industrial valves - Cast iron check valves |
| BS EN 12351 | 工業閥門.帶法蘭連接的閥門保護帽 | Industrial valves - Protective caps for valves with flanged connections |
| BS EN 12380 | 排水系統用進氣閥.要求、試驗方法和合格評定 | Air admittance valves for drainage systems - Requirements, test methods and evaluation of conformity |
| BS EN 12514-2 | 油燃燒器供油系統的安裝.安全性要求和試驗.部件、閥門、管道、過濾器、油空氣分離器、油量計 | Installations for oil supply systems for oil burners - Safety requirements and tests - Parts, valves, pipes, filters, oil de-aerators, meters |
| BS EN 12516-1 | 工業閥門.外殼設計強度.鋼制閥門外殼的列表法 | Industrial valves - Shell design strength - Tabulation method for steel valve shells |
| BS EN 12516-2 | 工業閥門.外殼設計強度.鋼制閥門外殼的計算方法 | Industrial vales - Shell design strength - Calculation method for steel valve shells |
| BS EN 12516-3 | 閥門.外殼設計強度.實驗方法 | Valves - Shell design strength - Experimental method |
| BS EN 12541 | 衛生設備配件.壓力沖洗閥和自動關閉便池沖水閥PN10 | Sanitary tapware - Pressure flushing valves and automatic closing urinal valves PN 10 |
| BS EN 12567 | 工業閥門.液化天然氣用隔離閥.適用性驗證試驗規范 | Industrial valves - Isolating valves for LNG - Specification for suitability and appropriate verification tests |
| BS EN 12569 | 工業閥門.化學和石油化學工藝工業閥門.要求和試驗 | Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests |
| BS EN 12570 | 工業閥門.操作元件尺寸控制方法 | Industrial valves - Method for sizing the operating element |
| BS EN 12627 | 工業閥門.鋼閥門的對接焊接端 | Industrial valves - Butt welding ends for steel valves |
| BS EN 1267 | 閥門.用水作為試驗流體的耐流動性能試驗 | Valves - Test of flow resistance using water as a test fluid |
| BS EN 12760 | 閥門.鋼閥門的套節焊接端 | Valves - Socket welding ends for steel valves |
| BS EN 1286 | 衛生排水塞.低壓機械混合閥.一般技術規范 | Sanitary tapware - Low pressure mechanical mixing valves - General technical specification |
| BS EN 1287 | 衛生排水塞.低壓恒溫混合閥.一般技術規范 | Sanitary tapware - Low pressure thermostatic mixing valves - General technical specifications |
| BS EN 12982 | 工業閥門.對焊尾閥一端至另一端和中心到端面的尺寸 | Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves |
| BS EN 13082 | 危險品運輸罐.裝罐設備.蒸汽傳輸閥門 | Tanks for transport of dangerous goods - Service equipment for tanks - Vapour transfer valve |
| BS EN 13152 | 液化石油氣瓶閥門規范和測試.自閉鎖 | Specification and testing of LPG cylinder valves - Self closing |
| BS EN 13153 | 液化石油氣瓶閥門規范和測試.手動操作 | Specification and testing of LPG cylinder valves - Manually operated |
| BS EN 13175 | 液化石油氣(LPG)罐閥和配件的規范和試驗 | Specification and testing for liquefied petroleum gas (LPG) tank valves and fittings |
| BS EN 13244-4 | 一般用途、排水和排污水的地下或地面壓力系統用塑料管道系統.聚乙烯.閥門 | Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Valves |
| BS EN 13308 | 危險物品運輸用槽罐車.槽罐車用輔助設備.無壓力平衡底閥 | Tanks for transport of dangerous goods - Service equipment for tanks - Non pressure balanced footvalve |
| BS EN 13312-5 | 生物技術.管道和儀表性能標準.閥門 | Biotechnology - Performance criteria for piping and instrumentation - Valves |
| BS EN 13316 | 危險物品運輸用槽罐車.槽罐車用輔助設備.壓力平衡底閥 | Tanks for transport of dangerous goods - Service equipment for tanks - Pressure balanced footvalve |
| BS EN 13397 | 工業閥.金屬材料制隔膜閥 | Industrial valves - Diaphragm valves made of metallic materials |
| BS EN 1349 | 工業用工序控制閥門 | Industrial process control valves |
| BS EN 13617-3 | 加油站.剪切閥的結構和性能的安全要求 | Petrol filling stations - Safety requirements for constuction and performance of shear valves |
| BS EN 13648-1 | 冷凝容器.防超壓安全保護裝置.冷凝設備的安全閥 | Cryogenic vessels - Safety devices for protection against excessive pressure - Safety valves for cryogenic service |
| BS EN 1366-2 | 服務設施的耐火試驗.防火閥 | Fire resistance tests for service installations - Fire dampers |
| BS EN 13709 | 工業用閥.鋼制球閥、球狀截止閥和止回閥 | Industrial valves - Steel globe and globe stop and check valves |
| BS EN 13774 | 最大工作壓力小于或等于16巴的配氣系統用閥門.性能要求 | Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements |
| BS EN 13786 | 丁烷、丙烷或它們的混合物用最大輸出壓力4巴及以下和100 kg/h及以下容積的自動轉換閥及其相關安全設備 | Automatic change-over valves having a maximum outlet pressure of up to and including 4 bar with a capacity of up to and including 100 kg/h, and their associated safety devices for butane, propane or their mixtures |
| BS EN 13789 | 工業用閥.鑄鐵球閥 | Industrial valves - Cast iron globe valves |
| BS EN 13792 | 實驗室內用水龍頭和閥門的識別色碼 | Colour coding of taps and valves for use in laboratories |
| BS EN 13828 | 建筑物用閥.建筑物內飲用水供給用手動銅合金及不銹鋼球閥.試驗及要求 | Building valves - Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings - Tests and requirements |
| BS EN 13942 | 石油和天然氣工業.管道輸送.管道閥 | Petroleum and natural gas industries - Pipeline transportation - Pipeline valves |
| BS EN 13953 | 液化石油氣(LPG)用移動式可填充儲氣瓶的減壓安全閥 | Pressure relief valves for transportable refillable cylinders for liquefied petroleum gas (LPG) |
| BS EN 14071 | LPG罐用減壓閥.輔助設備 | Pressure relief valves for LPG tanks - Ancillary equipment |
| BS EN 14124 | 帶內溢流口的沖洗水箱的進水閥 | Inlet valves for flushing cisterns with internal overflow |
| BS EN 14129 | LPG罐用減壓閥 | Pressure relief valves for LPG tanks |
| BS EN 14141 | 天然氣輸送用管道閥.性能要求和試驗 | Valves for natural gas transportation in pipelines - Performance requirements and tests |
| BS EN 14189 | 可運輸氣瓶.氣瓶定期檢查時氣瓶閥的檢查和維修 | Transportable gas cylinders - Inspection and maintenance of cylinder valves at time of periodic inspection of gas cylinders |
| BS EN 14382 | 氣壓調節站和裝置用安全設備.進氣口壓力100巴及以下的氣體安全截止閥 | Safety devices for gas pressure regulating stations and installations — Gas safety shut-off devices for inlet pressures up to 100 bar |
| BS EN 144-1 | 呼吸保護裝置.氣瓶閥.插入式連接器用螺紋連接 | Respiratory protective devices - Gas cylinder valves - Thread connections for insert connector |
| BS EN 144-2 | 呼吸保護裝置.氣瓶閥.出口連接 | Respiratory protective devices - Gas cylinder valves - Outlet connections |
| BS EN 144-3 | 呼吸保護裝置.氣瓶閥.潛水用Nitrox和氧氣氣瓶的出口接頭 | Respiratory protective devices - Gas cylinder valves - Outlet connections for diving gases Nitrox and oxygen |
| BS EN 1452-4 | 供水塑料管道系統.非增塑的聚氯乙烯(PVC-U).閥門和附屬設備 | Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Valves and ancillary equipment |
| BS EN 14529 | 呼吸保護裝置.逃生用包含由需求閥控制的正壓呼吸器的帶半罩式面具的自持式開路壓縮氣體呼吸機 | Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only |
| BS EN 14593-1 | 呼吸防護裝置.帶用量閥的壓縮空氣管路呼吸裝置.全罩式裝置.要求、檢驗和標記 | Respiratory protective devices - Compressed air line breathing apparatus with demand valve - Apparatus with a full mask - Requirements, testing, marking |
| BS EN 14593-2 | 呼吸防護裝置.帶用量閥的壓縮空氣管路呼吸裝置.在正壓下半罩式裝置.要求、檢驗和標記 | Respiratory protective devices - Compressed air line breathing apparatus with demand valve - Apparatus with a half mask at positive pressure - Requirements, testing, marking |
| BS EN 14596 | 危險物品運輸用罐.罐用輔助設備.應急減壓閥 | Tanks for transport of dangerous goods - Service equipment for tanks - Emergency pressure relief valve |
| BS EN 14848 | 氣溶膠容器.25.4 mm孔徑的金屬容器.閥座尺寸 | Aerosol containers — Metal containers with 25,4 mm aperture — Dimensions of valve cups |
| BS EN 14849 | 氣溶膠容器.玻璃容器.氣溶膠閥門金屬箍尺寸 | Aerosol containers — Glass containers — Dimensions of aerosol valve ferrules |
| BS EN 1487 | 建筑物閥門.液壓安全組.試驗和要求 | Building valves - Hydraulic safety groups - Tests and requirements |
| BS EN 1488 | 建筑物閥門.膨脹組.試驗和要求 | Building valves - Expansion groups - Tests and requirements |
| BS EN 1489 | 建筑物閥門.安全閥.試驗和要求 | Building valves - Pressure safety valves - Tests and requirements |
| BS EN 1490 | 建筑物閥門.溫度和壓力結合型的釋放閥門.試驗和要求 | Building valves - Combined temperature and pressure relief valves - Tests and requirements |
| BS EN 1491 | 建筑物閥門.膨脹閥門.試驗和要求 | Building valves - Expansion valves - Tests and requirements |
| BS EN 1503-1 | 閥門.閥門體、帽和蓋用材料.歐洲標準中規定的鋼材 | Valves - Materials for bodies, bonnets and covers - Steels specified in European Standards |
| BS EN 1503-2 | 閥門.閥門體、帽和蓋用材料.歐洲標準中規定之外的鋼材 | Valves - Materials for bodies, bonnets and covers - Steels other than those specified in European Standards |
| BS EN 1503-3 | 閥門.閥門體,帽和蓋用材料.歐洲標準中規定的鑄鐵 | Valves - Materials for bodies, bonnets and covers - Cast irons specified in European Standards |
| BS EN 1503-4 | 閥門.閥體、閥帽和閥蓋用材料.歐洲標準中規定的銅合金 | Valves - Materials for bodies, bonnets and covers - Copper alloys specified in European Standards |
| BS EN 1555-4 | 供應氣體燃料用塑料管道系統.聚乙烯(PE).閥門 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Valves |
| BS EN 1567 | 建筑物閥門.供水減壓閥和組合減壓閥.要求和試驗 | Building valves - Water pressure reducing valves and combination water reducing valves - Requirements and tests |
| BS EN 161 | 氣體燃燒器和燃?xì)馄骶咦詣?dòng)關閉閥 | Automatic shut-off valves for gas burners and gas appliances |
| BS EN 1626 | 制冷容器.制冷用閥門 | Cryogenic vessels - Valves for cryogenic service |
| BS EN 1643 | 燃?xì)馊紵b置和燃?xì)馄骶叩淖詣?dòng)關閉閥的閥門檢驗系統 | Valve proving systems for automatic shut-off valves for gas burners and gas appliances |
| BS EN 1680 | 塑料軟管系統.聚乙烯(PE)管道系統用的閥門.彎曲力施加在工作機構上和之后的密封性的檢驗方法 | Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanism |
| BS EN 1704 | 塑料管道系統.熱塑料管閥.彎曲情況下溫度循環后閥門完整性的試驗方法 | Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after temperature cycling under bending |
| BS EN 1705 | 塑料管道系統.熱塑性閥門.經過外部沖擊后閥門的完整性試驗方法 | Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after an external blow |
| BS EN 1751 | 建筑物通風.出氣口設備.減振器和閥的空氣動力學試驗 | Ventilation for buildings - Air terminal devices - Aerodynamic testing of dampers and valves |
| BS EN 1759-1 | 法蘭及其連接件.等級標示的管、閥門、配件和附件用環形法蘭.NPS 1/2到24 鋼法蘭 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class-designated - Steel flanges, NPS 1/2 to 24 |
| BS EN 1759-3 | 法蘭及其連接件.標注等級的管道、閥門、配件和附件用圓形法蘭.銅合金法蘭 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class designated - Copper alloy flanges |
| BS EN 1759-4 | 法蘭及其連接件.標注等級的管道、閥門、配件及附件用圓形法蘭.鋁合金法蘭 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class designated - Aluminium alloy flanges |
| BS EN 1827 | 呼吸保護裝置.防氣體或氣體和顆?；蛑环李w粒的無吸氣閥帶分離式過濾器的半面罩.要求、試驗和標記 | Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking |
| BS EN 19 | 工業閥門.金屬閥門的標志 | Industrial valves - Marking of metallic valves |
| BS EN 1984 | 工業閥門.鋼插板閥門 | Industrial valves - Steel gate valves |
| BS EN 215 | 恒溫散熱器控制閥.要求和試驗方法 | Thermostatic radiator valves - Requirements and test methods |
| BS EN 26553 | 自動凝汽閥標志規范 | Specification for marking of automatic steam traps |
| BS EN 26554 | 法蘭式自動凝汽閥的面對面尺寸規范 | Specification for face-to-face dimensions for flanged automatic steam traps |
| BS EN 26704 | 自動凝汽閥分類 | Classification of automatic steam traps |
| BS EN 26948 | 自動凝汽閥生產和性能特點試驗規范 | Specification for production and performance characteristic tests for automatic steam traps |
| BS EN 27841 | 自動凝汽閥蒸汽損失的測定方法 | Methods for determination of steam loss of automatic steam traps |
| BS EN 27842 | 自動凝汽閥排放量的測定方法 | Methods for determination of discharge capacity of automatic steam traps |
| BS EN 28233 | 熱塑性塑料閥門的扭矩試驗方法 | Thermoplastics valves - Torque - Test method |
| BS EN 28659 | 熱塑性塑料閥門.疲勞強度.試驗方法 | Thermoplastics valves - Fatigue strength - Test method |
| BS EN 331 | 建筑物燃?xì)夤?yīng)設備用手動球閥和密封底部錐體旋塞閥 | Manually operated ball valves and closed bottom taper plug valves for gas installations in buildings |
| BS EN 405 | 呼吸保護裝置.防氣體或防氣體和顆粒的閥濾式半面罩.要求、試驗和標記 | Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles - Requirements, testing, marking |
| BS EN 417 | 與便攜式灶具配用的帶有或不帶閥門的一次性金屬液化石油氣瓶.制作、檢驗、試驗和標記 | Non-refillable metallic gas cartridges for liquefied petroleum gases, with or without a valve, for use with portable appliances - Construction, inspection, testing and marking |
| BS EN 45510-7-1 | 發電站設備采購指南.管道系統和閥門.高壓管道系統.第1節:高壓管道系統 | Guide for the procurement of power station equipment - Pipework and valves - High pressure piping systems - Section 1: High pressure piping systems |
| BS EN 45510-7-2 | 發電站設備采購指南.管道系統和閥門.鍋爐和高壓閥門.第2節:鍋爐和高壓閥門 | Guide for the procurement of power station equipment - Pipework and valves - Boiler and high pressure valves - Section 2: Boiler and high pressure valves |
| BS EN 488 | 區域供暖管道.直埋式熱水供應網用預先絕熱包覆的管道系統.聚氨基甲酸乙酯熱絕緣和聚乙烯外覆層鋼管用鋼閥門 | District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
| BS EN 50216-8 | 電力變換器和電抗器附件.絕緣液電路用蝶閥 | Power transformer and reactor fittings — Part 8: Butterfly valves for insulating liquid circuits |
| BS EN 558-1 | 工業用閥.法蘭管系統使用的金屬閥的面至面和中心至面的尺寸.PN設計閥 | Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN-designated valves |
| BS EN 558-2 | 工業用閥.法蘭管系統使用的金屬閥.面至面和中心至面的尺寸.分類設計閥 | Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - Class-designated valves |
| BS EN 561 | 氣焊設備.焊接、切割和類似加工工藝用斷路閥門快速連接器 | Gas welding equipment - Quick-action coupling with shut-off valves for welding, cutting and allied processes |
| BS EN 593 | 工業閥門.金屬蝶閥 | Industrial valves - Metallic butterfly valves |
| BS EN 60534-1 | 工業過程控制閥.控制閥術語和一般考慮 | Industrial-process control valves - Control valve terminology and general considerations |
| BS EN 60534-2-1 | 工業過程控制閥 .流量.在安裝條件下確定流體流量的規模方程 | Industrial-process control valves - Flow capacity - Flow capacity - Sizing equations for fluid flow under installed conditions |
| BS EN 60534-2-3 | 工業過程控制閥.流量.試驗程序 | Industrial-process control valves - Flow capacity - Test procedures |
| BS EN 60534-2-5 | 工業過程控制閥.流通能力.通過有段間恢復功能的多段控制閥的流體流量的校準公式 | Industrial-process control valves - Flow capacity - Sizing equations for fluid flow through multistage control valves with interstage recovery |
| BS EN 60534-3-1 | 工業過程控制閥.尺寸.帶法蘭的兩路、球型、直立式控制閥門端面間尺寸和帶法蘭的兩路、球型、角度控制閥門中 | Industrial-process control valves - Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves |
| BS EN 60534-3-2 | 工業過程控制閥.尺寸.蝶形閥除外的轉式控制閥端面距 | Industrial-process control valves - Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves |
| BS EN 60534-3-3 | 工業過程控制閥.尺寸.對接焊接,兩向,球型,垂直模式控制閥端對端尺寸 | Industrial-process control valves - Dimensions - End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves |
| BS EN 60534-5 | 工業過程控制閥.標記 | Industrial-process control valves - Marking |
| BS EN 60534-6-1 | 工業過程控制閥 .控制閥位置控制器的安裝詳圖.位置控制器在線性執行機構上的安裝 | Industrial-process control valves - Mounting details for attachment of positioners to control valves - Positioner mounting on linear actuators |
| BS EN 60534-6-2 | 工業過程控制閥.定位器裝到控制閥的安裝細則.旋轉傳動裝置上安裝的定位器 | Industrial-process control valves - Mounting details for attachment of positioners to control valves - Positioner mounting on rotary actuators - Positioner mounting on rotary actuators |
| BS EN 60534-8-1 | 工業過程控制閥.噪聲問題.氣動流流經控制閥產生的噪聲的實驗室測量 | Industrial-process control valves — Part 8-1: Noise considerations — Laboratory measurement of noise generated by aerodynamic flow through control valves |
| BS EN 60534-8-2 | 工業過程控制閥.第8部分:噪聲.第2節:控制閥氣動噪聲實驗室測量 | Industrial-process control valves - Noise considerations - Laboratory measurement of noise generated by hydrodynamic flow through control valves |
| BS EN 60534-8-3 | 工業流程控制閥.噪聲.控制閥氣動噪聲預測法 | Industrial-process control valves - Noise considerations - Control valve aerodynamic noise prediction method - Control valve aerodynamic noise prediction method |
| BS EN 60534-8-4 | 工業過程控制閥.第8部分:噪聲.第4節.氣動噪聲預測 | Industrial-process control valves - Noise considerations - Prediction of noise generated by hydrodynamic flow |
| BS EN 60700-1 | 高壓直流(HVDC)電力傳輸半導體閘流閥.電氣試驗 | Thyristor valves for high voltage direct current (HVDC) power transmission - Electrical testing |
| BS EN 60730-2-19 | 家用及類似用途的電自動控制裝置.特殊要求 .電動油閥的特殊要求，包括機械要求 | Specification for automatic electrical controls for household and similar use - Particular requirements - Particular requirements for electrically operated oil valves, including mechanical requirements |
| BS EN 60730-2-8 | 家用和類似用途的自動電控制器規范.特殊要求.電操作水閥門的特殊要求,包括機械要求 | Specification for automatic electrical controls for household and similar use - Particular requirements - Particular requirements for electrically operated water valves, including mechanical requirements |
| BS EN 60896-21 | 固定式鉛酸蓄電池組.閥門調節型.試驗方法 | Stationary lead-acid batteries - Valve regulated types - Methods of test |
| BS EN 60896-22 | 固定式鉛酸蓄電池組.閥門調節型.要求 | Stationary lead-acid batteries - Valve regulated types - Requirements |
| BS EN 61056-1 | 便攜式鉛酸電池和蓄電池(閥調節型).一般要求、功能特性.試驗方法 | Portable lead-acid cells and batteries (valve-regulated types) - General requirements, functional characteristics - Methods of test |
| BS EN 61056-2 | 便攜式鉛酸電池和蓄電池(閥調節型).尺寸、接線端和標記 | Portable lead-acid cells and batteries (valve-regulated types) - Dimensions, terminals and marking |
| BS EN 61514-2 | 工業過程控制系統.氣動輸出智能閥門定位器性能評價的方法 | Industrial process control systems - Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs |
| BS EN 61514 | 工業過程控制系統.氣動輸出閥門定位器性能評價的方法 | Industrial-process control systems - Methods of evaluating the performance of valve positioners with pneumatic outputs |
| BS EN 61954 | 送電和配電系統用電力電子設備.靜態變量補償器用半導體閘流管閥門的試驗 | Power electronics for electrical transmission and distribution systems - Testing of thyristor valves for static VAR compensators |
| BS EN 629-1 | 可移動的儲氣瓶.連接儲氣瓶和閥用的25E錐螺紋.規范 | Transportable gas cylinders - 25E taper thread for connection of valves to gas cylinders - Specification |
| BS EN 629-2 | 可移動的儲氣瓶.連接儲氣瓶和閥用的25E錐螺紋.量規檢驗 | Transportable gas cylinders - 25E taper thread for connection of valves to gas cylinders - Gauge inspection |
| BS EN 736-1 | 閥門.術語.閥門類型定義 | Valves - Terminology - Definition of types of valves |
| BS EN 736-2 | 閥門.術語.閥門零部件的定義 | Valves - Terminology - Definition of components of valves |
| BS EN 736-3 | 閥門.術語.術語定義 | Valves - Terminology - Definition of terms |
| BS EN 738-3 | 醫療用氣體的壓力調節器.與氣瓶閥組合的壓力調節器 | Pressure regulators for use with medical gases - Pressure regulators integrated with cylinder valves |
| BS EN 816 | 衛生間水龍頭旋塞裝置.自動切斷閥 PN 10 | Sanitary tapware - Automatic shut-off valves PN 10 |
| BS EN 917 | 塑料管道系統.熱塑閥門.抗內壓和泄漏密封性的試驗方法 | Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leaktightness |
| BS EN 962 | 氣瓶.工業和醫用氣瓶的閥保護帽和閥罩 | Transportable gas cylinders - Valve protection caps and valve guards for industrial and medical gas cylinders - Design, construction and tests |
| BS EN ISO 10417 | 石油和天然氣工業.井下安全閥系統.設計、安裝、操作和矯正 | Petroleum and natural gas industries - Subsurface safety valve systems - Design, installation, operation and redress |
| BS EN ISO 10432 | 石油和天然氣工業.下降孔設備.地下安全閥設備 | Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment |
| BS EN ISO 10434 | 石油、石化和相關工業用螺栓帽狀鋼閘閥 | Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries |
| BS EN ISO 10497 | 閥門試驗.耐火試驗要求 | Testing of valves - Fire type-testing requirements |
| BS EN ISO 10692-2 | 氣瓶.用于微電子工業的儲氣瓶閥的連接接頭.接到鋼瓶連接接頭上的閥門的定型試驗和規范 | Gas cylinders - Gas cylinder valve connections for use in the microelectronics industry - Specification and type testing for valve to cylinder connections |
| BS EN ISO 11114-1 | 可運輸氣瓶.裝氣氣瓶和閥門材料的兼容性.金屬材料 | Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Metallic materials |
| BS EN ISO 11114-2 | 可運輸氣瓶.氣瓶和含氣閥門材料的可兼容性.非金屬材料 | Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Non-metallic materials |
| BS EN ISO 11114-3 | 可運輸氣瓶.裝氣氣瓶和閥門材料的兼容性.有氧環境中自燃試驗 | Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Autogenous ignition test in oxygen atmosphere |
| BS EN ISO 11116-1 | 氣瓶.閥門與氣瓶連接用17E錐型螺紋.規范 | Gas cylinders - 17E taper thread for connection of valves to gas cylinders - Specifications |
| BS EN ISO 11116-2 | 氣瓶.氣瓶與瓶閥連接用17E錐螺紋.檢驗量規 | Gas cylinders - 17E taper thread for connection of valves to gas cylinders - Inspection gauges |
| BS EN ISO 12209-1 | 氣瓶.壓縮可呼吸空氣用氣瓶閥的放氣連接器.叉形連接器 | Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Yoke type connections |
| BS EN ISO 12209-2 | 氣瓶.壓縮可呼吸空氣用氣瓶閥的放氣連接器.螺紋式連接器 | Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Threaded connections |
| BS EN ISO 12209-3 | 氣瓶.壓縮可呼吸氣體用氣瓶閥的出口連接.230巴閥門轉接器 | Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Adaptor for 230 bar valves |
| BS EN ISO 13340 | 可運輸燃?xì)馄?不可再填充氣體的鋼氣瓶的閥門.規范和原型件試驗 | Transportable gas cylinders - Cylinder valves for non-refillable cylinders - Specification and prototype testing |
| BS EN ISO 13341 | 可運輸儲氣瓶.儲氣瓶閥配件 | Transportable gas cylinders - Fitting of valves to gas cylinders |
| BS EN ISO 13758 | 石油和石油產品的試驗方法.液化石油氣.丙烷干燥性的評估.閥凍結法 | Methods of test for petroleum and its products - Liquefied petroleum gases - Assessment of the dryness of propane - Valve freeze method |
| BS EN ISO 14246 | 可運輸?shù)膬?chǔ)氣瓶.儲氣瓶閥門.生產試驗和檢驗 | Transportable gas cylinders - Gas cylinder valves - Manufacturing tests and inspections |
| BS EN ISO 14723 | 石油和天然氣工業.管道輸送系統.海下管道閥門 | Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves |
| BS EN ISO 15245-1 | 氣瓶.連接儲氣瓶閥門接頭用平行螺紋.規范 | Gas cylinders - Parallel threads for connection of valves to gas cylinders - Specification |
| BS EN ISO 15245-2 | 儲氣瓶.氣閥與儲氣瓶連接的平行螺紋.量規檢驗 | Gas cylinders - Parallel threads for connection of valves to gas cylinders - Gauge inspection |
| BS EN ISO 15364 | 船舶與海上技術.散貨船真空/壓力閥 | Ships and marine technology - Pressure/vacuum valves for cargo tanks |
| BS EN ISO 15761 | 石油和天然氣工業用尺寸為DN 100及更小的鋼閘閥、球閥和止回閥 | Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries |
| BS EN ISO 15848-1 | 工業閥門.漏氣的測量、試驗和鑒定程序.閥門定型試驗的分類系統和鑒定程序 | Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Classification system and qualification procedures for type testing of valves |
| BS EN ISO 15996 | 儲氣瓶.剩余壓力閥.一般要求和型式試驗 | Gas cylinders - Residual pressure valves - General requirements and type testing |
| BS EN ISO 17292 | 石油、石油化工和相關工業用金屬球閥 | Metal ball valves for the petroleum, petrochemical and allied industries |
| BS EN ISO 3822-2 | 聲學.由供水設施和設備發出噪音的實驗室試驗.放水龍頭和混合閥的安裝和工作條件 | Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Mounting and operating conditions for draw-off taps and mixing valves |
| BS EN ISO 3822-3 | 聲學.供水設施中使用的設備和裝置發出噪音的實驗室試驗.管路閥門和裝置的安裝和工作條作 | Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Mounting and operating conditions for in-line valves and appliances |
| BS EN ISO 407 | 小型醫用氣瓶.針導軛式閥連接 | Small medical gas cylinders - Pin-index yoke-type valve connections |
| BS EN ISO 4126-1 | 防超壓安全裝置.安全閥 | Safety devices for protection against excessive pressure - Safety valves |
| BS EN ISO 4126-4 | 過壓保護安全設備.由伺服電動機控制的安全閥 | Safety devices for protection against excessive pressure - Pilot operated safety valves |
| BS EN ISO 5135 | 聲學.通過混響室測定空調終端設備、空調終端裝置、阻尼器和閥門噪音的聲音功率級 | Acoustics - Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room |
| BS EN ISO 5210 | 工業閥門.多回轉閥門驅動裝置的附件 | Industrial valves - Multi-turn valve actuator attachments |
| BS EN ISO 5211 | 工業用閥門.部分回轉閥門驅動裝置的附件 | Industrial valves - Part-turn actuator attachments |
| BS EN ISO 9093-1 | 小艇.金屬海水閥和通體配件 | Small craft - Seacocks and through-hull fittings - Metallic |
| BS ISO 10294-2 | 耐火試驗.空氣調節系統用防火閥.試驗結果的分類、標準和應用領域 | Fire-resistance tests - Fire dampers for air distribution systems - Classification, criteria and field of application of test results |
| BS ISO 10294-4 | 耐火試驗.用于空氣調節系統的防火閥.熱釋放裝置試驗 | Fire-resistance tests - Fire dampers for air distribution systems - Test of thermal release mechanism |
| BS ISO 10294-5 | 耐火試驗.用于空氣分配系統的防火閥.膨脹防火閥 | Fire-resistance tests - Fire dampers for air distribution systems - Intumescent fire dampers |
| BS ISO 10372 | 液壓流體動力.4孔和5孔伺服閥.安裝面 | Hydraulic fluid power - Four-and five-port servovalves - Mounting surfaces |
| BS ISO 10770-1 | 液壓流體動力.電動調節液壓控制閥.第1部分:四向流動控制閥的試驗方法 | Hydraulic fluid power - Electrically modulated hydraulic control valves - Test methods for four-way directional flow control valves |
| BS ISO 10770-2 | 液壓流體動力.電動調節液壓控制閥.第2部分:三向流動控制閥的試驗方法 | Hydraulic fluid power - Electrically modulated hydraulic control valves - Test methods for three-way directional flow control valves |
| BS ISO 11727 | 氣動流體力學.控制閥和其它元部件的氣門和控制機構的標識 | Pneumatic fluid power - Identification of ports and control mechanisms of control valves and other components |
| BS ISO 11929-4 | 電離輻射測量的檢測限和判斷閥的確定.在沒有樣品處理的影響下用模擬線性刻度輻射強度計測量的基本原理和方 | Determination of the detection limit and decision threshold for ionizing radiation measurements - Fundamentals and application to measurements by use of linear-scale analogue ratemeters, without the influence of sample treatment |
| BS ISO 12238 | 氣壓液動.方向控制閥門.轉換時間的測量 | Pneumatic fluid power - Directional control valves - Measurement of shifting time |
| BS ISO 14617-8 | 圖示的圖形符號.閥門和氣流調節器 | Graphical symbols for diagrams - Valves and dampers |
| BS ISO 15218 | 氣液傳動.3/2電磁閥.安裝接口表面 | Pneumatic fluid power - 3/2 solenoid valves - Mounting interface surfaces |
| BS ISO 15364 | 船舶技術.貨槽用壓力/真空閥 | Ships and marine technology. Pressure/vacuum valves for cargo tanks |
| BS ISO 15407-1 | 氣動流體動力.尺寸為18mm和26mm的五孔方向控制閥.無電氣連接器的安裝界面 | Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Mounting interface surfaces without electrical connector |
| BS ISO 15407-2 | 氣壓傳動.五氣口定向控制閥,規格18mm和26mm.有任選電連接器的安裝接口 | Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Mounting interface surfaces with optional electrical connector |
| BS ISO 15665 | 聲學.管、閥和法蘭隔聲 | Acoustics - Acoustic insulation for pipes, valves and flanges |
| BS ISO 17082 | 氣壓傳動.閥.供貨商文件中的數據 | Pneumatic fluid power - Valves - Data to be included in supplier literature |
| BS ISO 20401 | 氣動液壓驅動系統.方向控制閥.直徑為8mm-12mm的電動圓形連接器的管腳分布規范 | Pneumatic fluid power systems - Directional control valves - Specification of pin assignment for electrical round connectors of diameters 8 mm and 12 mm |
| BS ISO 4401 | 液壓流體動力.四孔定向控制閥.安裝面 | Hydraulic fluid power - Four-port directional control valves - Mounting surfaces |
| BS ISO 5599-1 | 氣壓流體動力.五通方向控制閥.不帶電連接器的安裝接口表面 | Pneumatic fluid power - Five-port directional control valves - Mounting interface surfaces without electrical connector |
| BS ISO 5599-2 | 氣壓流體動力.五通方向控制閥.帶選用電氣連接器的安裝接口面 | Pneumatic fluid power - Five-port directional control valves - Mounting interface surfaces with optional electrical connector |
| BS ISO 5781 | 液壓傳動.減壓閥、順序閥、卸荷閥、節流閥和單向閥.安裝面 | Hydraulic fluid power - Pressure reducing valves, sequence valves , unloading valves, throttle valves and check valves - Mounting surfaces |
| BS ISO 6263 | 液壓流體動力.補償式流量控制閥.安裝面 | Hydraulic fluid power - Compensated flow-control valves - Mounting surfaces |
| BS ISO 6264 | 液壓流體動力.減壓閥.安裝面 | Hydraulic fluid power - Pressure-relief valves - Mounting surfaces |
| BS ISO 6953-2 | 氣壓傳動.壓縮空氣調壓閥和帶過濾器的調壓閥.評定供應商文件中包括的主要特性的試驗方法 | Pneumatic fluid power - Compressed air pressure regulators and filter-regulators - Test methods to determine the main characteristics to be included in literature from suppliers |
| BS ISO 7789 | 液壓流體動力.二孔、三孔和四孔擰入式卡盤閥.孔腔 | Hydraulic fluid power - Two-, three- and four-port screw-in cartridge valves - Cavities |
| BS ISO 7790 | 液壓流體動力.規格為02、03和05型的四孔模數疊閥和四孔定向控制閥.夾緊尺寸 | Hydraulic fluid power - Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05 - Clamping dimensions |
| BS ISO 9393-1 | 工業用熱塑性閥門.壓力試驗方法和要求.總則 | Thermoplastics valves for industrial applications - Pressure test methods and requirements - General |
| BS ISO/TR 7470 | 儲氣瓶閥門出口.已標準化或使用中的供應目錄 | Valve outlets for gas cylinders - List of provisions which are either standardized or in use |
| BS MA 5 | 閥門黃銅名牌規范 | Specification for brass service nameplates for valves |
| 編號 | 中文名稱 | 英文名稱 |