微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| BS 2067 | 絕緣材料的功率因子與電容率的測定(哈特遜和瓦德法) | Determination of power-factor and permittivity of insulating materials (Hartshorn & Ward method) |
| BS 2844 | 固體電絕緣材料試驗前與試驗時的標準條件 | Standard conditions for use prior to and during the testing of solid electrical insulating materials |
| BS 4542 | 薄型電絕緣材料損耗角正切值和介電常數的測定方法(楞氏法) | Method for determination of loss tangent and permittivity of electrical insulating materials in sheet form (Lynch method) |
| BS 4607-1 | 電氣裝置用非金屬導管及接頭規范.第1部分:絕緣材料接頭和元件規范 | Non-metallic conduits and fittings for electrical installations - Specification for fittings and components of insulating material |
| BS 4607-5 | 電氣裝置用非金屬導管及接頭規范.第5部分:絕緣材料剛性導管、接頭和元件規范 | Non-metallic conduits and fittings for electrical installations - Specification for rigid conduits, fittings and components of insulating material |
| BS 4678-4 | 電纜管道.第4部分:絕緣材料制電纜管道規范 | Cable trunking - Specification for cable trunking made of insulating material |
| BS 5591 | 用液體萃取法測定電絕緣材料中離子雜質的試驗方法 | Methods of test for determination of ionic impurities in electrical insulating materials by extraction with liquids |
| BS 5604 | 電絕緣材料在嚴酷環境條件下耐劃痕與侵蝕性評定方法 | Methods for evaluating resistance to tracking and erosion of electrical insulating materials used under severe ambient conditions |
| BS 5735 | 電絕緣材料電解腐蝕測定的試驗方法 | Test methods for determining electrolytic corrosion with electrical insulating materials |
| BS 5823 | 絕緣材料升溫度電阻和電阻率測試方法 | Method of test for electrical resistance and resistivity of insulating materials at elevated temperatures |
| BS 6233 | 固體電絕緣材料的體積電阻率與表面電阻率試驗方法 | Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials |
| BS 6921 | 使用包封管方法對撓性板材電氣絕緣材料的耐熱性評估方法 | Method for evaluation of the thermal endurance of flexible sheet electrical insulating materials using the wrapped tube method |
| BS 7663 | 片型和管型電絕緣材料介電常數和耗散因數測定試驗方法 | Methods of test for determination of permittivity and dissipation factor of electrical insulating material in sheet or tubular form |
| BS 7737-1 | 頻率大于300MHz的絕緣材料介電性能測定用推薦方法 | Recommended methods for the determination of the dielectric properties of insulating materials at frequencies above 300 MHz - General |
| BS 7808 | 電絕緣材料.耐交流電壓的評定.導言 | Electrical insulating materials - A.C. voltage endurance evaluation - Introduction |
| BS 7811-2 | 確定電離輻射對絕緣材料影響指南.第2部分:輻照和試驗程序 | Guide for determining the effects of ionizing radiation on insulating materials - Procedures for irradiation and test |
| BS 7819 | 電氣絕緣材料的耐熱測試分析試驗方法應用指南 | Guidelines for application of analytical test methods for thermal endurance testing of electrical insulating materials |
| BS DD ENV 61072 | 評價絕緣材料防樹形網絡生成的試驗方法 | Methods of test for evaluating the resistance of insulating materials against the initiation of electrical trees |
| BS DD ENV 61111 | 電氣用絕緣材料物 | Matting of insulating material for electrical purposes |
| BS DD ENV 61112 | 電氣用絕緣材料織毯 | Blankets of insulating material for electrical purposes |
| BS DD IEC/TS 61934 | 電子絕緣材料和系統.在短上升時間和反復電壓脈沖下局部放電(PD)的電子測量 | Electrical insulating materials and systems - Electrical measurement of partial discharges (PD) under short rise time and repetitive voltage impulses |
| BS EN 13820 | 建筑物用熱絕緣材料.有機物含量測定 | Thermal insulating materials for building applications - Determination of organic content |
| BS EN 14063-1 | 熱絕緣材料和產品.現場成形膨脹粘土輕集料產品.松填裝產品安裝前的規范 | Thermal insulation materials and products - In-situ formed expanded clay lightweight aggregate products (LWA) - Specification for the loose-fill products before installation |
| BS EN 3475-701 | 航空航天系列.飛行器用電纜.試驗方法.絕緣材料與導體的脫層和附著力 | Aerospace series - Cables, electrical, aircraft use - Test methods - Strippability and adherence of insulation to the conductor |
| BS EN 50290-2-23 | 通信電纜.通用設計規則和制造.PE絕緣材料 | Communication cables - Part 2-23: Common design rules and construction - PE insulation |
| BS EN 60112 | 固體絕緣材料的比較起痕指數和驗證指數的測定方法 | Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
| BS EN 60216-1 | 電絕緣材料耐熱性能的測定指南.老化試驗程序和試驗結果的評定 | Guide for the determination of thermal endurance properties of electrical insulating materials - Ageing procedures and evaluation of test results |
| BS EN 60216-4-2 | 電絕緣材料耐熱性能測定導則.電絕緣材料,耐熱特性.溫度達300攝氏度的精密爐 | Guide for the determination of thermal endurance properties of electrical insulating materials - Electrical insulating materials - Thermal endurance properties - Precision ovens for use up to 300 °C |
| BS EN 60216-4-3 | 電絕緣材料耐熱性能測定導則.電氣絕緣材料.耐熱特性.老化爐.多室爐 | Guide for the determination of thermal endurance properties of electrical insulating materials - Electrical insulating materials - Thermal endurance properties - Ageing ovens - Multi-chamber ovens - Multi-chamber ovens |
| BS EN 60216-5 | 電絕緣材料.耐熱特性.絕緣材料的相對耐熱指數(RTE)的測定 | Electrical insulating materials - Thermal endurance properties - Determination of relative thermal endurance index (RTE) of an insulating material |
| BS EN 60216-6 | 電絕緣材料.耐熱性能.使用固定時間框法測定絕緣材料的耐熱指數(TI和RTE) | Electrical insulating materials - Thermal endurance properties - Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method |
| BS EN 60243-1 | 固體絕緣材料介電強度試驗方法.電源頻率下的試驗 | Methods of test for electric strength of solid insulating materials - Tests at power frequencies |
| BS EN 60243-2 | 固體絕緣材料介電強度試驗方法.直流電壓測試補充要求 | Methods of test for electric strength of solid insulating materials - Additional requirements for tests using direct voltage |
| BS EN 60243-3 | 固體絕緣材料介電強度試驗方法.1.2/50s沖擊試驗補充要求 | Methods of test for electric strength of solid insulating materials - Additional requirements for 1,2/50 ?s impulse tests |
| BS EN 60343 | 測定絕緣材料耐表面放電擊穿的相對電阻的推薦試驗方法 | Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges |
| BS EN 60371-1 | 云母基絕緣材料規范.定義和一般要求 | Specification for insulating materials based on mica - Definitions and general requirements |
| BS EN 60371-2 | 云母基絕緣材料規范.試驗方法 | Specification for insulating materials based on mica - Methods of test |
| BS EN 60371-3-1 | 云母基絕緣材料規范.第3部分:單項材料規范.第1節:換向器隔板和材料 | Specification for insulating materials based on mica - Specifications for individual materials - Commutator separators and materials |
| BS EN 60371-3-3 | 云母基絕緣材料規范.第3部分:單項材料規范.第3節:加熱設備用硬質云母材料 | Specification for insulating materials based on mica - Specifications for individual materials - Specification for rigid mica materials for heating equipment |
| BS EN 60371-3-4 | 云母基絕緣材料規范.第3部分:單項材料規范.第4節:用B級環氧樹脂粘合劑粘結的聚酯薄膜襯底云母紙 | Specification for insulating materials based on mica - Specifications for individual materials - Polyester film-backed mica paper with a B-stage epoxy resin binder |
| BS EN 60371-3-5 | 云母基絕緣材料.單項材料規范.用環氧樹脂粘合劑粘結待浸漬處理的玻璃纖維織物襯底云母紙 | Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 5: Glass-backed mica paper with an epoxy resin binder for post-impregnation (VPI) |
| BS EN 60371-3-6 | 云母基絕緣材料規范.第3部分:單項材料規范.第6節:用B級環氧樹脂粘合劑粘結的玻璃纖維織物襯底云母紙 | Specification for insulating materials based on mica - Specifications for individual materials - Glass-backed mica paper with a B-stage epoxy resin binder |
| BS EN 60371-3-7 | 云母基絕緣材料規范.第3部分:單項材料規范.單根導線膠帶用帶有環氧樹脂粘結劑的聚脂薄膜云母紙 | Specification for insulating materials based on mica - Specifications for individual materials - Polyester film mica paper with an epoxy resin binder for single conductor taping |
| BS EN 60371-3-8 | 云母基絕緣材料規范.第3部分:單項材料規范.第8活頁:耐燃燒安全電纜用云母紙帶 | Specification for insulating materials based on mica - Specifications for individual materials - Mica paper tapes for flame-resistant security cables |
| BS EN 60371-3-9 | 云母基絕緣材料規范.單項材料規范.模壓成形的人造云母 | Specification for insulating materials based on mica - Specifications for individual materials - Moulding micanite |
| BS EN 60450 | 新舊纖維素電絕緣材料聚合的平均粘度測量 | Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials |
| BS EN 60544-1 | 電氣絕緣材料.離子輻射效應測定.輻射相互作用和劑量計 | Electrical insulating materials - Determination of the effects of ionizing radiation - Radiation interaction and dosimetry |
| BS EN 60544-4 | 電絕緣材料.電離輻射的效應測定.輻射環境中設備的分類系統 | Electrical insulating materials - Determination of the effects of ionizing radiation - Classification system for service in radiation environments |
| BS EN 60544-5 | 電絕緣材料.確定電離輻射的影響.在使用過程中老化的評定方法 | Electrical insulating materials - Determination of the effects of ionizing radiation - Procedures for assessment of ageing in service |
| BS EN 60672-1 | 陶瓷和玻璃絕緣材料.定義和分類 | Ceramic and glass insulating materials - Definitions and classification |
| BS EN 60672-2 | 陶瓷和玻璃絕緣材料.試驗方法 | Ceramic and glass insulating materials - Methods of test |
| BS EN 60672-3 | 陶瓷和玻璃絕緣材料.專用材料規范 | Ceramic and glass insulating materials - Specifications for individual materials |
| BS EN 60893-1 | 絕緣材料.電工用熱固性樹脂基工業硬質層壓薄板.定義、標記和一般要求 | Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Definitions, designations and general requirements |
| BS EN 60893-2 | 絕緣材料.電工用熱固性樹脂基工業硬質層壓薄板.試驗方法 | Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Methods of test |
| BS EN 60893-3-1 | 絕緣材料.電工用熱固性樹脂基工業硬質層壓薄板.單項材料規范.工業硬質層壓薄板類型要求 | Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for types of industrial rigid laminated sheets |
| BS EN 60893-3-2 | 絕緣材料.電工用熱固性樹脂基工業硬質層壓薄板.單項材料規范.環氧樹脂基硬質層壓薄板要求 | Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins |
| BS EN 60893-3-3 | 絕緣材料.電工用熱固性樹脂基工業硬質層壓薄板.單項材料規范.三聚氰胺樹脂基硬質層壓薄板要求 | Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins |
| BS EN 60893-3-4 | 絕緣材料.電工用熱固性樹脂基工業硬質層壓薄板.單項材料規范.酚醛樹脂基硬質層壓薄板要求 | Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins |
| BS EN 60893-3-5 | 絕緣材料.電工用熱固性樹脂基工業硬質層壓薄板.單項材料規范.聚酯樹脂基硬質層壓薄板要求 | Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins |
| BS EN 60893-3-6 | 絕緣材料.電工用熱固性樹脂基工業硬質層壓薄板.單項材料規范.硅酮樹脂基硬質層壓薄板要求 | Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins |
| BS EN 60893-3-7 | 絕緣材料.電工用熱固性樹脂基工業硬質層壓薄板.各種材料規范.對聚酰亞胺樹脂基剛性層壓薄板的要求 | Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on polymide resins |
| BS EN 60903 | 帶電作業.絕緣材料制手套 | Live working - Gloves of insulating material |
| BS EN 60984 | 帶電作業用絕緣材料套規范 | Specification for sleeves of insulating material for live working |
| BS EN 61006 | 電氣絕緣材料.玻璃化轉變溫度測定用試驗方法 | Electrical insulating materials - Methods of test for the determination of the glass transition temperature |
| BS EN 61074 | 用差示掃描量熱法測定電絕緣材料熔化和結晶時所產生的熱量和溫度的試驗方法 | Method of test for determination of heats and temperatures of melting and crystallization of electrical insulating materials by differential scanning calorimetry |
| BS EN 61181 | 浸漬絕緣材料.溶解氣體分析在電氣設備出廠試驗中的應用 | Impregnated insulating materials - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment |
| BS EN 61234-1 | 電絕緣材料水解穩定性的試驗方法.第1部分:塑料薄膜 | Method of test for hydrolytic stability of electrical insulating materials - Method of test for hydrolytic stability of electrical insulating materials - Plastic films |
| BS EN 61234-2 | 電絕緣材料水解穩定性試驗方法.模壓熱固性 | Method of test for hydrolytic stability of electrical insulating materials - Moulded thermosets |
| BS EN 61302 | 電氣絕緣材料.抗電弧和侵蝕性的評定.常規輪浸蝕試驗 | Electrical insulating materials - Method to evaluate the resistance to tracking and erosion - Rotating wheel dip test |
| BS EN 61478 | 帶電作業.絕緣材料制的梯子 | Live working - Ladders of insulating material |
| BS EN 61479 | 帶電作業.絕緣材料的柔性導體包覆物 | Live working - Flexible conductor covers (line hoses) of insulating material |
| BS EN 61621 | 干性固體絕緣材料.高電壓低電流電弧狀放電電阻試驗 | Dry, solid insulating materials - Resistance test to high-voltage , low-current arc discharges |
| BS EN 62011-1 | 絕緣材料.基于熱固樹脂材料的矩形和六角形截面的工業用剛性模塑的疊層管材和棒材.定義、符號和名及一般要求 | Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes - Definitions, designations and general requirements |
| BS EN 62011-2 | 絕緣材料.電工用熱固性樹脂基矩形和六邊形截面的工業硬質模塑層壓管材和桿材.試驗方法 | Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section, based on thermosetting resins for electrical purposes - Methods of test |
| BS EN 62011-3-1 | 絕緣材料.電工用熱固性樹脂基矩形和六邊形截面的工業硬質模塑層壓管材和桿材.矩形和六邊形橫截面的管材和桿 | Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical puroposes - Tubes and rods of rectangular and hexagonal cross-section |
| BS ISO 11561 | 熱絕緣材料的老化.閉孔塑料耐熱性能的長期變化量的測定(加速實驗室試驗方法) | Ageing of thermal insulation materials - Determination of the long-term change in thermal resistance of closed-cell plastics (accelerated laboratory test methods) |
| DD ENV 61072 | 防絕緣材料由電樹形網絡起燃性評價的試驗方法 | Methods of test for evaluating the resistance of insulating materials against the initiation of electrical trees |
| DD ENV 61111 | 電絕緣材料的無光澤表面 | Matting of insulating material for electrical purposes |
| DD ENV 61112 | 電絕緣材料的涂鍍層 | Blankets of insulating material for electrical purposes |
| PD 6621 | 熱絕緣材料用歐洲試驗方法標準指南 | Guidance on the new European test method standards for thermal insulation materials |
| PD IEC 61956 | 評價絕緣材料中水份枝狀組織的試驗方法 | Methods of test for the evaluaion of water treeing in insulating materials |
| 編號 | 中文名稱 | 英文名稱 |