微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| EN 50289-3-17 | 通信電纜 試驗方法規范 第3-17部分：機械試驗方法 絕緣材料和包皮的粘合力 | Communication cables - Specifications for test methods - Part 3-17: Mechnical test methods; Adhesion of dielectric and sheath / Note: Applies in conjunction with EN 50289-3-1 |
| EN 60112 | 固體絕緣材料防漏電痕跡指數和比較漏電痕跡指數的測定方法 | Method for the determination of the proof and the comparative tracking indices of solid insulating materials (IEC 60112:2003) / Note: Endorsement notice |
| EN 60216-1 | 電氣絕緣材料 耐熱性能 第1部分：老化規程和試驗結果的評價 | Electrical insulating materials - Properties of thermal endurance - Part 1: Ageing procedures and evaluation of test results (IEC 60216-1:2001) |
| EN 60216-3 | 電氣絕緣材料 耐熱性能 第3部分：計算耐熱性特性參數的說明 | Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics (IEC 60216-3:2002) |
| EN 60216-4-2 | 電氣絕緣材料 耐熱性能 第4-2部分：老化烘箱 最高至300的精密烘爐 | Electrical insulating materials - Thermal endurance properties - Part 4-2: Ageing ovens; Precision ovens for use up to 300℃ (IEC 60216-4-2:2000) |
| EN 60216-4-3 | 電氣絕緣材料 耐熱性能 第4-3部分：老化烘箱 多室烘箱 | Electrical insulating materials - Thermal endurance properties - Part 4-3: Ageing ovens; Multi-chamber ovens (IEC 60216-4-3:2000) |
| EN 60216-5 | 電氣絕緣材料 耐熱性能 第5部分：絕緣材料相關耐熱指數的測定 | Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material (IEC 60216-5:2003) / Note: Endorsement notice |
| EN 60243-1 | 固體絕緣材料電氣強度 試驗方法 第1部分：工頻下試驗 | Electrical strength of insulating materials - Test methods - Part 1: Tests at power frequencies (IEC 60243-1:1998) |
| EN 60243-2 | 固體絕緣材料電氣強度試驗方法 第2部分：對直流電壓試驗的附加要求 | Electric strength of insulating materials - Test methods - Part 2: Additional requirements for tests using direct voltage (IEC 60243-2:2001) |
| EN 60243-3 | 固體絕緣材料電氣強度試驗方法 第3部分：用1,2/50沖擊試驗的附加要求 | Electrical strength of insulating materials - Test methods - Part 3: Additional requirements for 1,2/50 us impulse tests (IEC 60243-3:2001) |
| EN 60343 | 測定絕緣材料耐表面放電擊穿的相對電阻的推薦試驗方法 | Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges (IEC 60343:1991) |
| EN 60371-1 | 以云母為基材的絕緣材料規范 第1部分：定義和一般要求 | Specification for insulating materials based on mica - Part 1: Definitions and general requirements (IEC 60371-1:2003) / Note: Endorsement notice |
| EN 60371-2 | 以云母為基材的絕緣材料規范 第2部分：試驗方法 | Specification for insulating materials based on mica - Part 2: Methods of test (IEC 60371-2:1987 + A1:1994) |
| EN 60371-3-1 | 以云母為基材的絕緣材料規范 第3部分：單項材料規范 活頁1：換向器隔板及材料 | Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 1: Commutator separators and materials (IEC 60371-3-1:1984) |
| EN 60371-3-2 | 以云母為基材的絕緣材料規范 第3部分：單項材料規范 活頁2：云母紙 | Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 2: Mica paper (IEC 60371-3-2:1991) |
| EN 60371-3-3 | 以云母為基材的絕緣材料規范 第3部分：單項材料規范 活頁3：加熱設備用硬質云母材料 | Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 3: Specification for rigid mica materials for heating equipment (IEC 60371-3-3:1983) |
| EN 60371-3-4 | 以云母為基材的絕緣材料規范 第3部分：單項材料規范 活頁4：聚酯薄膜補強B階環氧樹脂粘合云母紙 | Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 4: Polyester film-backed mica paper with a B-stage epoxy resin binder (IEC 60371-3-4:1992) |
| EN 60371-3-5 | 以云母為基材的絕緣材料規范 第3部分：單項材料規范 活頁5：后浸漬用玻璃布補強環氧樹脂粘合云母紙 | Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 5: Glass-backed mica paper with an epoxy resin binder for post-impregnation (VPI) (IEC 60371-3-5:1992) |
| EN 60371-3-6 | 以云母為基材的絕緣材料規范 第3部分：單項材料規范 活頁6：補強玻璃布B階環氧樹脂粘合云母紙 | Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 6: Glass-backed mica paper with a B-stage epoxy resin binder (IEC 60371-3-6:1992) |
| EN 60371-3-7 | 以云母為基材的絕緣材料 第3部分：單項材料規范 活頁7：單根導線纏繞用環氧樹脂粘合聚脂薄膜云母紙 | Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 7: Polyester film mica paper with an epoxy resin binder for single conductor taping (IEC 60371-3-7:1995 + Corrigendum 1995) |
| EN 60371-3-8 | 以云母為基材的絕緣材料 第3部分：單項材料規范 活頁8：耐燃燒安全電纜用云母紙帶 | Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 8: Mica paper tapes for flame-resistant security cables (IEC 60371-3-8:1995 + Corrigendum 1995) |
| EN 60371-3-9 | 以云母為基絕緣材料 第3部分：.單項材料規范 活頁9：.塑型云母板 | Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 9: Moulding micanite (IEC 60371-3-9:1995 + Corrigendum 1995) |
| EN 60544-1 | 電絕緣材料 離子輻射效應的測定 第1部分： 輻射相互作用和劑量 | Electrical insulating materials - Determination of the effects of ionizing radiation - Part 1: Radiation interaction and dosimetry (IEC 60544-1:1994) |
| EN 60544-4 | 電絕緣材料 致電離輻射效應的測定 第4部分：輻射環境中服務的分類體系 | Electrial insulating materiales - Determination of the effects of ionizing radiation - Part 4: Classification system for service in radiation environments (IEC 60544-4:2003) / Note: Endorsement notice |
| EN 60544-5 | 電絕緣材料 致電離輻射效應的測定 第5部分：服務過程中老化評估的程序 | Electrical insulating materials - Determination of the effects of ionizing radiation - Part 5: Procedures for assessment of ageing in service (IEC 60554-5:2003) / Note: Endorsement notice |
| EN 60672-1 | 陶瓷和玻璃絕緣材料 第1部分：定義和分類 | Ceramic and glass insulating materials - Part 1: Definitions and classification (IEC 60672-1:1995) |
| EN 60672-2 | 陶瓷和玻璃絕緣材料 第2部分：試驗方法 | Ceramic and glass insulating materials - Part 2: Methods of test (IEC 60672-2:1999) |
| EN 60672-3 | 陶瓷和玻璃絕緣材料 第3部分：專用材料規范 | Ceramic and glass-insulating materials - Part 3: Specifications for individual materials (IEC 60672-3:1997) |
| EN 60903-1992+A11 | 帶電作業用絕緣材料手套和連指手套的規范 | Specification for gloves and mitts of insulting material for live working (IEC 60903:1988, modified) |
| EN 60903/prAA | 帶電作業用絕緣材料手套和連指手套的規范 修改ＡＡ | Specification for gloves and mitts of insulating material for live working |
| EN 61006 | 測定電氣絕緣材料玻璃化轉變溫度的試驗方法 | Methods of test for the determination of the glass transition temperature of electrical insulating materials (IEC 61006:1991) |
| EN 61074 | 用差示掃描量熱法測定電氣絕緣材料熔融及結晶的熱量和溫度 | Determination of heats and temperatures of melting and crystallization of electrical insulating materials by differential scanning calorimetry (IEC 61074:1991) |
| EN 61181 | 浸漬絕緣材料 溶解氣體分析(DGA)應用于電氣設備的工廠試驗 | Impregnated insulating materials - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment (IEC 61181:1993) |
| EN 61234-1 | 電氣絕緣材料水解穩定性的試驗方法 第1部分：塑料薄膜 | Method of test for the hydrolytic stability of electrical insulating materials- |
| EN 61234-2 | 電氣絕緣材料 水解穩定性的試驗方法 第2部分：模塑熱固性材料 | Electrical insulating materials - Methods of test for the hydrolytic stability - Part 2: Moulded thermosets (IEC 61234-2:1997) |
| EN 61302 | 電氣絕緣材料 評定耐起痕和耐腐蝕的方法 旋轉輪沉浸試驗 | Electrical insulating materials - Method to evaluate the resistance to tracking and erosion - Rotating wheel dip test (IEC 61302:1995) |
| EN 61478 | 帶電作業 絕緣材料制梯子 | Live working - Ladders of insulating material (IEC 61478:2001) / Note: Endorsement notice |
| EN 61479 | 帶電作業 絕緣材料制軟導線外皮(線軟管) | Live working - Flexible conductor covers (line hoses) of insulating material (IEC 61479:2001) |
| EN 61621 | 干燥實心絕緣材料 耐高壓、低電流、電弧放電的試驗 | Dry, solid insulating materials - Resistance test to high-voltage, low-current arc discharges (IEC 61621:1997) |
| EN 62011-1 | 絕緣材料 以熱固樹脂為基礎的電氣用矩形和六角形橫截面工業用、剛性的、模制的、層狀管和棒材 第1部分： | Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements (IEC 62011-1:2002) / |
| ENV 61072 | 評定絕緣材料耐電樹生成的試驗方法 | Methods of test for evaluating the resistance of insulating materials against the initiation of electrical trees (IEC 61072:1991) |
| ENV 61111 | 電工用絕緣材料墊 | Matting of insulating material for electrical purposes (IEC 61111:1992 + Corrigendum 2000, modified) |
| ENV 61112 | 電工用絕緣材料墊 | Blankets of insulating material for electrical purposes (IEC 61112:1992 + Corrigendum 2000, modified) |
| HD 380 S2 | 評價在嚴酷環境條件下使用的電絕緣材料的抗電蝕和抗腐蝕能力的試驗方法 | Test methods for evaluating resistance to tracking and erosion of electrical insulating materials used under severe ambient conditions |
| HD 381 S1 | 用液體萃取法測定電絕緣材料中離子雜質的試驗方法 | Methods of test for the determination of ionic impurities in electrical insulating materials by extraction with liquids |
| HD 429 S1 | 固體電絕緣材料體電阻率和表面電阻率的試驗方法 | Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials |
| HD 437 S1 | 固體電絕緣材料試驗中和試驗前使用的標準條件 | Standard conditions for use prior to and during the testing of solid electrical insulating materials |
| HD 438 S1 | 升溫狀態下絕緣材料的電阻和電阻率的試驗方法 | Method of test for electrical resistance and resistivity of insulating materials at elevated temperatures |
| HD 541 S1 | 測定固體電絕緣材料暴露于電熱絲時的可燃性的試驗方法 | Methods of test for the determination of the ignitability of solid electrical insulating materials when exposed to electrically heated wire sources (IEC 60829:1988, modified) |
| HD 568 S1 | 固體絕緣材料絕緣電阻測定的試驗方法 | Methods of test for the determination of the insulation resistance of solid insulating materials |
| HD 611.2 S1 | 電絕緣材料耐熱特性測定指南 第2部分：試驗標準的選擇 | Guide for the determination of thermal endurance properties of electrical insulating materials - Part 2: Choice of test criteria (IEC 60216-2:1990) |
| HD 611.4.1 S1 | 電絕緣材料耐熱特性測定指南 第4部分：老化烘箱 第1節：單室烘箱 | Guide for the determination of thermal endurance properties of electrical insulating materials - Part 4: Ageing ovens; section 1: single-chamber ovens (IEC 60216-4-1:1990) |
| prEN 60903 | 生活用 絕緣材料手套 | Live working - Gloves of insulating material |
| 編號 | 中文名稱 | 英文名稱 |