微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| BS 5731 | 農林拖拉機外部設備控制器安裝孔和基座規范 | Specification for mountings and apertures for external equipment controls on agricultural and forestry tractors |
| BS 5834-1 | 燃氣和給水廠用地面控制器和防護器及地下室.第1部分:包括基本構件的防護裝置規范 | Surface boxes, guards and underground chambers for gas and waterworks purposes - Specification for guards, including foundation units |
| BS 5834-2 | 燃氣和給水廠用地面控制器和防護器及地下室.第2部分:小型地面控制器規范 | Surface boxes, guards and underground chambers for gas and waterworks purposes - Specification for small surface boxes |
| BS 5834-3 | 燃氣和給水廠用地面控制器和防護器及地下室.第3部分:大型地面控制器規范 | Surface boxes, guards and underground chambers for gas and waterworks purposes - Specification for large surface boxes |
| BS 5834-4 | 燃氣和給水廠用地面控制器和防護器及地下室.第4部分:預制室規范 | Surface boxes, guards and underground chambers for gas and waterworks purposes - Specification for preformed chambers |
| BS 5836 | 計算機輔助測量和控制(CAMACA)指南.多格柵系統的組織規范:分類信息通路和CAMAC A1型格柵控制器規范 | Guide to CAMAC: organization of multi-crate systems: specification of the Branch-highway and CAMAC crate controller Type A1 |
| BS 7461 | 裝有流量調節器、閉路開關檢驗、閉合位置指示開關或氣流量控制器電動式氣體自動關閉閥規范 | Specification for electrically operated automatic gas shut-off valves fitted with throughput adjusters, proof of closure switches, closed position indicator switches or gas flow control |
| BS DD CEN/TS 15448 | 郵政服務.圖像控制器和動力系統間的開放標準接口(光學字符識別、視頻編碼系統、表決系統) | Postal services - Open standard interface between image controller and enrichment devices (OCRs, video coding systems, voting systems) |
| BS DD IEC TS 62091 | 低壓開關設備和控制設備.固定式消防泵驅動器用控制器 | Low-voltage switchgear and controlgear - Controllers for drivers of stationary fire pumps |
| BS DD IEC/TS 62228 | 集成電路.控制器局域網絡(CAN)無線電收發器的電磁兼容性(EMC)評估 | Integrated circuits - EMC evaluation of CAN transceivers |
| BS EN 12098-1 | 加熱系統用控制器.熱水加熱系統用外部溫度補償控制設備 | Controls for heating systems - Outside temperature compensated control equipment for hot water heating systems |
| BS EN 12098-2 | 加熱系統用控制器.熱水加熱系統用最佳啟-?？刂圃O備 | Controls for heating systems - Optimum start-stop control equipment for hot water heating systems |
| BS EN 12098-3 | 加熱系統用控制器.電加熱系統用外部溫度補償控制設備 | Controls for heating systems - Outside temperature compensated control equipment for electrical heating systems |
| BS EN 12098-4 | 加熱系統用控制器.電氣系統用最佳起止控制設備 | Controls for heating systems - Optimum start-stop control equipment for electrical systems |
| BS EN 12098-5 | 加熱系統用控制器.加熱系統用起止調度器 | Controls for heating systems - Start-stop schedulers for heating systems |
| BS EN 126 | 燃氣器具的多功能控制器 | Multifunctional controls for gas burning appliances |
| BS EN 12675 | 交通信號控制器.功能安全要求 | Traffic signal controllers - Functional safety requirements |
| BS EN 14597 | 制熱系統的溫度控制器和溫度限制器 | Temperature control devices and temperature limiters for heat generating systems |
| BS EN 14624 | 移動式檢漏器和鹵化制冷劑室內控制器的性能 | Performances of mobile leak detectors and of room controllers of halogenated refrigerants |
| BS EN 50295 | 低壓開關和控制設備.控制器和設備接口系統.傳動傳感器接口(AS-i) | Low-voltage switchgear and controlgear - Controller and device interface systems - Actuator sensor interface (AS-i) |
| BS EN 50325-1 | 根據ISO 11898：控制器裝置接口制定的工業通信子系統.一般要求 | Industrial communication subsystem based on ISO 11898 (CAN) for controller-device interfaces - General requirements |
| BS EN 50325-2 | 控制器裝置接口用基于ISO 11898的工業通信子系統.裝置網 | Industrial communication subsystem based on ISO 11898 (CAN) for controller-device interfaces - DeviceNet |
| BS EN 50325-3 | 控制器裝置接口用基于ISO 11898的工業通信子系統.智能分布系統 | Industrial communication subsystem based on ISO 11898 (CAN) for controller-device interfaces - Smart distributed systems (SDS) |
| BS EN 50325-4 | 基于ISO 11898：控制器裝置接口的工業通信子系統.CANopen | Industrial communication subsystem based on ISO 11898 (CAN) for controller-device interfaces - CANopen |
| BS EN 60534-6-1 | 工業過程控制閥 .控制閥位置控制器的安裝詳圖.位置控制器在線性執行機構上的安裝 | Industrial-process control valves - Mounting details for attachment of positioners to control valves - Positioner mounting on linear actuators |
| BS EN 60546-1 | 工業過程控制系統用模擬信號控制器.第1部分:性能評定方法 | Controllers with analogue signals for use in industrial-process control systems - Controllers with analogue signals for use in industrial-process control systems - Methods for evaluating performance |
| BS EN 60546-2 | 工業過程控制系統用模似信號控制器.第2部分:檢驗和常規試驗指南 | Controllers with analogue signals for use in industrial-process control systems - Guidance for inspection and routine testing |
| BS EN 60601-2-24 | 醫療電氣設備.特殊安全要求.輸液泵和控制器的特殊安全要求. | Medical electrical equipment - Particular requirements for safety - Particular requirements for the safety of infusion pumps and controllers |
| BS EN 60730-1 | 家用和類似用途的自動電控制器的規范.一般要求 | Specification for automatic electrical controls for household and similar use - General requirements |
| BS EN 60730-2-1 | 家用和類似用途自動電控制器規范.特殊要求.家用電器電控制器 | Specification for automatic electrical controls for household and similar use - Particular requirements - Electrical controls for electrical household appliances |
| BS EN 60730-2-13 | 家用和類似用途自動電控制器規范.特殊要求.濕敏控制器的特殊要求 | Automatic electrical controls for household and similar use - Particular requirements for humidity sensing controls |
| BS EN 60730-2-16 | 家用和類似用途自動電控制器.家用和類似用途浮子型電自動水位控制器的特殊要求 | Automatic electrical controls for household and similar use - Particular requirements for automatic electrical water level controls of the float type for household and similar applications |
| BS EN 60730-2-2 | 家用或類似用途的自動控制器.熱電動機保護器的特殊要求 | Automatic controls for household and similar use - Particular requirements for thermal motor protectors |
| BS EN 60730-2-3 | 家用和類似用途自動電氣控制器.管形熒光燈鎮流器用熱保護器的特殊要求 | Automatic electrical controls for household and similar use - Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps |
| BS EN 60730-2-6 | 家用和類似用途的自動電氣控制裝置規范.特殊要求.包括機械要求的電氣自動壓敏控制器 | Specification for automatic electrical controls for household and similar use - Particular requirements - Automatic electrical pressure sensing controls including mechanical requirements - Section 2.6: Automatic electrical pressure sensing controls including mechanical requirements |
| BS EN 60730-2-8 | 家用和類似用途的自動電控制器規范.特殊要求.電操作水閥門的特殊要求,包括機械要求 | Specification for automatic electrical controls for household and similar use - Particular requirements - Particular requirements for electrically operated water valves, including mechanical requirements |
| BS EN 60730-2-9 | 家用和類似用途的電氣自動控制器規范.特別要求.溫度感應控制的特別要求 | Automatic electrical controls for household and similar use - Particular requirements for temperature sensing controls |
| BS EN 60947-4-2 | 低壓開關裝置和控制裝置.電流接觸器和電動起動器.交流半導體電動控制器和電流起動器 | Low-voltage switchgear and controlgear - Contactors and motor-starters - AC semiconductor motor controllers and starters |
| BS EN 60947-4-3 | 低壓開關裝置和控制裝置.電流接觸器和電動起動器.非電動機負荷用交流半導體控制器和電流接觸器 | Low-voltage switchgear and controlgear - Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads |
| BS EN 61131-1 | 可編程控制器.一般說明 | Programmable controllers - General information |
| BS EN 61131-2 | 程序控制器.設備要求和試驗 | Programmable controllers - Equipment requirements and tests |
| BS EN 61131-3 | 可編程控制器.程序設計語言 | Programmable controllers - Programming languages |
| BS EN 61131-5 | 可編程控制器.通信 | Programmable controllers - Communications |
| BS EN 61131-7 | 可編程控制器.模糊控制程序 | Programmable controllers - Fuzzy control programming |
| BS EN 61297 | 工業過程控制系統.鑒定用自適應控制器分類 | Industrial-process control systems - Classification of adaptive controllers for the purpose of evaluation |
| BS EN 62271-101 | 高壓開關設備和控制器.綜合測試 | High-voltage switchgear and controlgear - Synthetic testing |
| BS EN 62271-201 | 高壓開關裝置和控制器.第201部分:額定電壓大于1KV、≤52KV的交流絕緣封閉開關和控制設備 | High voltage switchgear and controlgear — Part 201: AC insulation-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV |
| BS EN 62271-202 | 高壓開關設備和控制器.第202部分:高壓/低壓預制式變電站 | High-voltage switchgear and controlgear - Part 202: High voltage/low voltage prefabricated substation |
| BS G 217 | 座艙照明控制器的一般要求規范 | Specification for general requirements for cockpit lighting controllers |
| BS G 248 | 混合式遙控功率控制器規范.一般要求 | Specification for hybrid remote power controllers - General requirements |
| BS G 249 | 固態遙控功率控制器規范.一般要求 | Specification for solid-state remote power controllers - General requirements |
| BS ISO 11898-3 | 道路車輛.控制器區域網(CAN).低速、耐故障、依賴媒介的界面 | Road vehicles - Controller area network (CAN) - Low-speed, fault-tolerant, medium-dependent interface |
| BS ISO 11898-5 | 道路車輛.控制器局域網絡(CAN).低功率模式的高速媒體訪問單元 | Road vehicles - Controller area network (CAN) - High-speed medium access unit with low-power mode |
| BS ISO 13592 | 小型飛機.汽油發動機用回火火焰控制器 | Small craft - Backfire flame control for petrol engines |
| BS ISO 13990-1 | 紡織機械與附件.針織機用輸紗器和紗控制器.詞匯 | Textile machinery and accessories - Yarn feeders and yarn control for knitting machines - Vocabulary |
| BS ISO 13990-2 | 紡織機械與附件.針織機用輸紗器和紗控制器.輸紗器和紗控制器的連接尺寸 | Textile machinery and accessories - Yarn feeders and yarn control for knitting machines - Connecting dimensions for yarn feeders and yarn control devices |
| BS ISO 13990-3 | 紡織機械與附件.針織機用輸紗器和紗控制器.連接尺寸和互連電纜 | Textile machinery and accessories - Yarn feeders and yarn control for knitting machines - Dimensions for connecting and interconnection cables |
| BS ISO 16121-3 | 道路車輛.專用線公共汽車駕駛員工作場所的人體工效學要求.信息設備和控制器 | Road vehicles - Ergonomic requirements for the driver's workplace in line-service buses - Information devices and controls |
| BS ISO 6145-7 | 氣體分析.標定用混合氣體的制備.動態容量法.熱物流控制器 | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Thermal mass-flow controllers |
| DISC PD 0012-6 | 數據保護.數據控制器和數據處理器合同的指南 | Data protection - Guide to data controller and data processor contracts |
| PD IEC TR 61131-8 | 可編程控制器.編程語言的應用和執行指南 | Programmable controllers. Guidelines for the application and implementation of programming languages |
| 編號 | 中文名稱 | 英文名稱 |