微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| IEC 60268-8 | 聲系統設備 第8部分:自動增益控制器件 | Sound system equipment. Part 8 : Automatic gain control devices |
| IEC 60546-1 | 工業過程控制系統用模擬信號控制器 第1部分:性能評定方法 | Controllers with analogue signals for use in industrial-process control systems. Part 1: Methods of evaluating the performance. |
| IEC 60546-2 | 工業過程控制系統用模擬信號控制器 第2部分:檢驗和常規試驗指南 | Controllers with analogue signals for use in industrial-process control systems. Part 2: Guidance for inspection and routine testing. |
| IEC 60552 AMD 1 | 計算機輔助測量與控制 多機箱系統組織 分支總線和A1型計算機輔助測量與控制機箱控制器規范 修改1 | CAMAC - Organization of multi-crate systems. Specifications of the Branch-highway and CAMAC crate controller Type A1 |
| IEC 60552 | 計算機輔助測量與控制 多機箱系統組織 分支總線和A1型計算機輔助測量與控制機箱控制器規范 | CAMAC - Organization of multi-crate systems. Specifications of the Branch-highway and CAMAC crate controller Type A1 |
| IEC 60601-2-24 | 醫用電氣設備 第2-24部分:輸液泵及其控制器的安全專用要求 | Medical electrical equipment - Part 2-24: Particular requirements for the safety of infusion pumps and controllers |
| IEC 60729 | 計算機輔助測量與控制機箱中的多重控制器 | Multiple controllers in a CAMAC crate |
| IEC 60730-1 AMD 1 | 家用和類似用途電器自動控制器.第1部分:一般要求.修改1 | Automatic electrical controls for household and similar use - Part 1: General requirements; Amendment 1 |
| IEC 60730-1 AMD 2 | 家用和類似用途用自動電器控制器.第1部分:一般要求.修改件2 | Automatic electrical controls for household and similar use - Part 1: General requirements; Amendment 2 |
| IEC 60730-1 Edition 3.1 | 家用和類似用途的電自動控制器.第1部分:一般要求 | Automatic electrical controls for household and similar use - Part 1: General requirements |
| IEC 60730-1 Edition 3.2 | 家用和類似用途的自動電動控制器.第1部分:一般要求 | Automatic electrical controls for household and similar use - Part 1: General requirements |
| IEC 60730-1 | 家用和類似用途的電氣自動控制器 第1部分:一般要求 | Automatic electrical controls for household and similar use - Part 1: General requirements |
| IEC 60730-2-10 | 家用和類似用途的電氣自動控制器.第2-10部分:電動馬達啟動繼電器的特殊要求 | Automatic electrical controls for household and similar use - Part 2 10: Particular requirements for electrically operated motor-starting relays |
| IEC 60730-2-11 | 家用和類似用途的電氣自動控制器.第2-11部分:能量調制器的特殊要求 | Automatic electrical controls for household and similar use - Part 2-11: Particular requirements for energy regulators |
| IEC 60730-2-12 | 家用和類似用途的電氣自動控制器.第2-12部分:電動門鎖的特殊要求 | Automatic electrical controls for household and similar use - Part 2-12: Particular requirements for electrically operated door locks |
| IEC 60730-2-13 | 家用和類似用途的電器自動控制器.第2-13部分:濕度敏感控制器的特殊要求 | Automatic electrical controls for household and similar use - Part 2-13: Particular requirements for humidity sensing controls |
| IEC 60730-2-14 AMD 1 | 家用和類似用途的電氣自動控制器 第2-14部分:電驅動器的特殊要求 修改1 | Automatic electrical controls for household and similar use - Part 2-14: Particular requirements for electric actuators; Amendment 1 |
| IEC 60730-2-14 Edition 1.1 | 家用和類似用途的電自動控制器.第2-14部分:電傳動裝置的特殊要求 | Automatic electrical controls for household and similar use - Part 2-14: Particular requirements for electric actuators |
| IEC 60730-2-14 | 家用和類似用途的電氣自動控制器 第2-14部分:電驅動器的特殊要求 | Automatic electrical controls for household and similar use - Part 2: Particular requirements for electric actuators |
| IEC 60730-2-15 | 家用和類似用途的電氣自動控制器 第2-15部分:鍋爐用浮子或電極敏感式水位電氣自動敏感控制器的特殊要求 | Automatic electrical controls for household and similar use - Part 2: Particular requirements for automatic electrical water level sensing controls of the float or electrode-sensor type used in boiler applications |
| IEC 60730-2-16 AMD 1 | 家用和類似用途的電氣自動控制器 第2-16部分:家用和類似用途浮子式水位電氣自動控制器的特殊要求 修改1 | Automatic electrical controls for household and similar use - Part 2: Particular requirements for automatic electrical water level operating controls of the float type for household and similar applications; Amendment 1 |
| IEC 60730-2-16 AMD 2 | 家用和類似用途的電氣自動控制器 第2-16部分:家用和類似用途浮子式水位電氣自動控制器的特殊要求 修改2 | Automatic electrical controls for household and similar use - Part 2-16: Particular requirements for automatic electrical water level controls of the float type for household and similar applications; Amendment 2 |
| IEC 60730-2-16 Edition 1.2 | 家用和類似用途的電自動控制器.第2-16部分:家用和類似用途浮子式水位自動電控制器的特殊要求 | Automatic electrical controls for household and similar use - Part 2-16: Particular requirements for automatic electrical water level controls of the float type for household and similar applications |
| IEC 60730-2-16 | 家用和類似用途的電器自動控制器.第2部分:家用和類似用途浮子式水位自動電控制器的特殊要求 | Automatic electrical controls for household and similar use - Part 2: Particular requirements for automatic electrical water level operating controls of the float type for household and similar applications |
| IEC 60730-2-17 AMD 2 | 家用及類似用途的自動電氣控制器.第2部分:包括機械要求的電動氣閥用特殊要求 | Automatic electric controls for household and similar use - Part 2: Particular requirements for electrically operated gas valves, including mechanical requirements |
| IEC 60730-2-17 Edition 1.2 | 家用和類似用途電自動控制器.第2-17部分:電動煤氣閥門包括機械要求的特殊要求 | Automatic electrical controls for household and similar use - Part 2-17: Particular requirements for electrically operated gas valves, including mechanical requirements |
| IEC 60730-2-17 | 家用及類似用途的電氣自動控制器 第2-17部分:電動氣閥的特殊要求(包括機械要求) | Automatic electrical controls for household and similar use - Part 2: Particular requirements for electrically operated gas valves, including mechanical requirements |
| IEC 60730-2-18 | 家用及類似用途的電氣自動控制器 第2-18部分:電氣自動水流和氣流敏感控制器的特殊要求(包括機械要求) | Automatic electrical controls for household and similar use - Part 2: Particular requirements for automatic electrical water and air flow sensing controls, including mechanical requirements |
| IEC 60730-2-19 AMD 2 | 家用和類似用途的自動電氣控制器.第2-19部分:包括機械要求的電動油閥用特殊要求 | Automatic electric controls for household and similar use - Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements |
| IEC 60730-2-19 | 家用及類似用途的電氣自動控制器 第2-19部分:電動油閥的特殊要求(包括機械要求) | Automatic electric controls for household and similar use - Part 2: Particular requirements for electrically operated oil valves, including mechanical requirements |
| IEC 60730-2-2 AMD 1 | 修改件1.家用和類似用途的電氣自動控制器.第2-2部分:電動機熱保護器的特殊要求 | Amendment 1 - Automatic electrical controls for household and similar use - Part 2-2: Particular requirements for thermal motor protectors |
| IEC 60730-2-2 Edition 2.1 | 家用和類似用途的電氣自動控制器.第2-2部分:電動機熱保護器的特殊要求 | Automatic electrical controls for household and similar use - Part 2-2: Particular requirements for thermal motor protectors |
| IEC 60730-2-3 | 家用和類似用途的自動電控制器.第2-3部分:管式熒光燈鎮流器熱保護器的特殊要求 | Automatic electrical controls for household and similar use - Part 2-3: Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps |
| IEC 60730-2-4 | 家用和類似用途的電氣自動控制器.第2-4部分:封裝和半封裝電動機的壓縮機組的電動機熱保護器的特殊要求 | Automatic electrical controls for household and similar use - Part 2 4: Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type |
| IEC 60730-2-5 AMD 1 | 修改件1.家用及類似用途的電氣自動控制器.第2-5節:燃燒器電氣自動控制系統的特殊要求 | Amendment 1 - Automatic electrical controls for household and similar use - Part 2-5: Particular requirements for automatic electrical burner control systems |
| IEC 60730-2-5 Edition 3.1 | 家用和類似用途的電氣自動控制器.第2-5部分:燃燒器電氣自動控制系統的特殊要求 | Automatic electrical controls for household and similar use - Part 2-5: Particular requirements for automatic electrical burner control systems |
| IEC 60730-2-5 | 家用和類似用途的電氣自動控制器 第2-5部分:燃燒器電氣自動控制系統的特殊要求 | Automatic electrical controls for household and similar use - Part 2-5: Particular requirements for automatic electrical burner control systems |
| IEC 60730-2-6 | 家用和類似用途的自動電氣控制器.第2-6部分:包括機械要求的自動電氣壓力敏感控制器的特殊要求 | Automatic electrical controls for household and similar use - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements |
| IEC 60730-2-7 AMD 1 | 家用和類似用途的電氣自動控制器 第2-7部分:定時器和定時開關的特殊要求 修改1 | Automatic electrical controls for household and similar use; part 2: particular requirements for timers and time switches; amendment 1 |
| IEC 60730-2-7 | 家用和類似用途的電氣自動控制器 第2-7部分:定時器和定時開關的特殊要求 | Automatic electrical controls for household and similar use; part 2: particular requirements for timers and time switches |
| IEC 60730-2-8 AMD 1 | 家用和類似用途的電氣自動控制器.第2-8部分:電動水閥的特殊要求(包括機械要求).修改件1 | Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements; Amendment 1 |
| IEC 60730-2-8 Edition 2.1 | 家用和類似用途的電器自動控制器.第2-8部分:電動水閥的特殊要求(包括機械要求) | Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements |
| IEC 60730-2-8 | 家用和類似用途的電氣自動控制器 第2-8部分:電動水閥的特殊要求(包括機械要求) | Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements |
| IEC 60730-2-9 AMD 1 | 家用和類似用途的電氣自動控制器.第2-9部分:溫度敏感控制器的特殊要求.修改件1 | Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls; Amendment 1 |
| IEC 60730-2-9 AMD 2 | 修改件2.家用和類似用途的電氣自動控制器.第2-9部分:溫度敏感控制器的特殊要求 | Amendment 2 - Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls |
| IEC 60730-2-9 Edition 2.1 | 家用和類似用途的電氣自動控制器.第2-9部分:溫度敏感控制器的特殊要求.修改件1 | Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls |
| IEC 60730-2-9 Edition 2.2 | 家用和類似用途的電氣自動控制器.第2-9部分:溫敏控制器的特殊要求 | Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls |
| IEC 60730-2-9 | 家用和類似用途的電氣自動控制器 第2-9部分:溫度敏感控制器的特殊要求 | Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls |
| IEC 60947-4-1 AMD 2 | 修改件2.低壓開關設備和控制設備.第4-2部分:接觸器和電動機起動器.機電式控制器和電動機起動器 | Amendment 2 - Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters |
| IEC 60947-4-2 AMD 1 Corrigendum 1 | 低壓開關設備和控制裝置.第4-2部分:接觸器和電動啟動器.交流電半導體電動控制器和啟動器 | Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters |
| IEC 60947-4-2 AMD 1 | 低壓開關設備和控制設備 第4-2部分:接觸器和電動機起動器 交流半導體電動機控制器和起動器 修改1 | Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters; AC semiconductor motor controllers and starters; Amendment 1 |
| IEC 60947-4-2 AMD 2 | 低壓開關設備和控制設備.第4-2部分:接觸器和電動機起動器.交流半導體電動機控制器和起動器.修改件2 | Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters; Amendment 2 |
| IEC 60947-4-2 Corrigendum 1 | 低壓開關設備和控制設備.第4-2部分:接觸器和電動機起動器.交流半導體電動機控制器和起動器 | Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters |
| IEC 60947-4-2 Edition 2.1 | 低壓開關設備和控制設備.第4-2部分:接觸器和電動機起動器.交流半導體電動機控制器和起動器 | Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters; AC semiconductor motor controllers and starters |
| IEC 60947-4-2 Edition 2.2 | 低壓開關設備和控制設備.第4-2部分:電流接觸器和電動機起動器.交流半導體電動機控制器和起動器 | Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters |
| IEC 60947-4-2 | 低壓開關設備和控制設備 第4-2部分:接觸器和電動機起動器 交流半導體電動機控制器和起動器 | Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters |
| IEC 60947-4-3 AMD 1 | 低壓開關設備和控制設備.第4-3部分:連接器和電動機起動器.無電動機負荷的交流半導體控制器和連接器 | Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads; Amendment 1 |
| IEC 60947-4-3 Corrigendum 1 | 低壓開關設備和控制設備.第4-3部分:接觸器和電動機起動器.非電動機負載用交流半導體控制器和接觸器 | Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads |
| IEC 60947-4-3 Edition 1.1 | 低壓開關設備和控制設備.第4-3部分:電流接觸器和電動機起動器 非電動機負載用交流半導體控制器和電流接觸器 | Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads |
| IEC 60947-4-3 | 低壓開關設備和控制設備 第4-3部分:接觸器和電動機起動器 非電動機負載用交流半導體控制器和接觸器 | Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads |
| IEC 61131-1 | 可編程控制器 第1部分:一般說明 | Programmable controllers - Part 1: General information |
| IEC 61131-2 | 可編程控制器.第2部分:設備要求和試驗 | Programmable controllers - Part 2: Equipment requirements and tests |
| IEC 61131-3 | 程序控制器.第3部分:程序設計語言 | Programmable controllers - Part 3: Programming languages |
| IEC 61131-5 | 可編程控制器 第5部分:通信 | Programmable controllers - Part 5: Communications |
| IEC 61131-7 | 可編程控制器 第7部分:模糊控制編程 | Programmable controllers - Part 7: Fuzzy control programming |
| IEC 61227 | 核電廠 控制室 操縱員用控制器 | Nuclear power plants; control rooms; operator controls |
| IEC 61297 | 工業過程控制系統 評定用自適應控制器的分類 | Industrial-process control systems - Classification of adaptive controllers for the purpose of evaluation |
| IEC 62026-1 | 低壓開關裝置和控制裝置.控制器裝置接口(CDIs).第1部分:一般規則 | Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 1: General rules |
| IEC 62026-2 | 低壓開關設備和控制設備 控制器-器件的接口(CDIs) 第2部分:操動件敏感元件接口(AS-i) | Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 2: Actuator sensor interface (AS-i) |
| IEC 62026-3 | 低壓開關設備和控制設備 控制器-器件的接口(CDIs) 第3部分:器件網絡 | Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet |
| IEC 62091 | 低壓開關設備和控制器.固定消防泵啟動的控制器 | Low-voltage switchgear and controlgear - Controllers for drivers of stationary fire pumps |
| IEC 62271-1 | 高壓開關設備和控制器.第1部分:通用規范 | High-voltage switchgear and controlgear - Part 1: Common specifications |
| IEC 62271-100 Edition 1.2 | 高壓開關裝置和控制器.第100部分:高壓交流電流斷路器 | High-voltage switchgear and controlgear - Part 100: High-voltage alternating-current circuit-breakers |
| IEC/TR 60786 | 電動汽車用控制器 | Controllers for electric road vehicles |
| IEC/TR 61131-4 | 可編程控制器.第4部分:用戶指南 | Programmable controllers - Part 4: User guidelines |
| IEC/TR 61131-8 | 可編程控制器.第8部分:編程語言的執行和應用指南 | Programmable controllers - Part 8: Guidelines for the application and implementation of programming languages |
| IEC/TR 62271-300 | 高壓開關裝置和控制器.第300部分:交流電流斷路器的抗震鑒定 | High-voltage switchgear and controlgear - Part 300: Seismic qualification of alternating current circuit-breakers |
| IEC/TS 62228 | 集成電路.控制器局域網絡(CAN)無線電收發器的電磁兼容性(EMC)評估 | Integrated circuits - EMC evaluation of CAN transceivers |
| ISO 10296 | 航空器 混合式遙控電源控制器 一般要求 | Aircraft; hybrid remote power controllers; general requirements |
| ISO 11898-1 Technical Corrigendum 1 | 道路車輛.控制器局域網絡.第1部分:數據鏈層和物理信令.技術勘誤1 | Road vehicles - Controller area network (CAN) - Part 1: Data link layer and physical signalling; Technical Corrigendum 1 |
| ISO 11898-1 | 道路車輛.控制器局域網絡.第1部分:數據鏈層和物理信令 | Road vehicles - Controller area network (CAN) - Part 1: Data link layer and physical signalling |
| ISO 11898-2 | 道路車輛.控制器局域網絡.第2部分:高速媒體存取單元 | Road vehicles - Controller area network (CAN) - Part 2: High-speed medium access unit |
| ISO 11898-3 Technical Corrigendum 1 | 道路車輛.控制器局域網絡(CAN).第3部分:低速、耐故障、依賴媒介的界面.技術勘誤1 | Road vehicles - Controller area network (CAN) - Part 3: Low-speed, fault-tolerant, medium-dependent interface; Technical Corrigendum 1 |
| ISO 11898-3 | 道路車輛.控制器局域網絡(CAN).第3部分:低速、耐故障、依賴媒介的界面 | Road vehicles - Controller area network (CAN) - Part 3: Low-speed, fault-tolerant, medium-dependent interface |
| ISO 11898-4 | 道路車輛.控制器局域網絡.第4部分:時間觸發通信 | Road vehicles - Controller area network (CAN) - Part 4: Time-triggered communication |
| ISO 11898-5 | 道路車輛.控制器區域網絡(CAN).第5部分:低功率模式的高速媒體訪問單元 | Road vehicles - Controller area network (CAN) - Part 5: High-speed medium access unit with low-power mode |
| ISO 13851 | 機械安全.雙手控制器.功能問題和設計原理 | Safety of machinery - Two-hand control devices - Functional aspects and design principles |
| ISO 13990-1 | 紡織機械與附件.針織機用輸紗器和紗控制器.第1部分:詞匯 | Textile machinery and accessories - Yarn feeders and yarn control for knitting machines - Part 1: Vocabulary |
| ISO 13990-2 | 紡織機械與附件.針織機用輸紗器和紗控制器.第2部分:輸紗器和紗控制設備的連接尺寸 | Textile machinery and accessories - Yarn feeders and yarn control for knitting machines - Part 2: Connecting dimensions for yarn feeders and yarn control devices |
| ISO 13990-3 | 紡織機械與附件.針織機用輸紗器和紗控制器.第3部分:連接尺寸和互連電纜 | Textile machinery and accessories - Yarn feeders and yarn control for knitting machines - Part 3: Dimensions for connecting and interconnection cables |
| ISO 15078 | 林業機械 裝載機 雙向控制器控制操作的位置和方法 | Machinery for forestry - Log loaders - Location and method of operation of two-lever operator controls |
| ISO 15765-1 | 道路車輛.控制器區域網絡(CAN)診斷.第1部分:一般信息 | Road vehicles - Diagnostics on Controller Area Networks (CAN) - Part 1: General information |
| ISO 15765-2 | 道路車輛.控制器區域網絡(CAN)的診斷.第2部分:網絡層服務 | Road vehicles - Diagnostics on Controller Area Networks (CAN) - Part 2: Network layer services |
| ISO 15765-3 | 道路車輛.控制器區域網絡(CAN)的診斷.第3部分:統一標準診斷服務的實施 | Road vehicles - Diagnostics on Controller Area Networks (CAN) - Part 3: Implementation of unified diagnostic services (UDS on CAN) |
| ISO 15765-4 | 道路車輛.控制器區域網絡(CAN)診斷.第4部分:相關發射系統的要求 | Road vehicles - Diagnostics on Controller Area Networks (CAN) - Part 4: Requirements for emissions-related systems |
| ISO 16845 | 道路車輛.控制器區域網(CAN).合格試驗計劃 | Road vehicles - Controller area network (CAN) - Conformance test plan |
| ISO 23551-3 | 氣體燃燒器和燃?xì)庠O(shè)備用安全和控制設備.特殊要求.第3部分:氣動型燃?xì)?空氣比率控制器 | Safety and control devices for gas burners and gas-burning appliances - Particular requirements - Part 3: Gas/air ratio controls, pneumatic type |
| ISO 7643 | 旅居掛車和輕型掛車 帶有防撞擊主車的制動器的O1類和O2類掛車 制動控制器的線性臺架試驗法 | Caravans and light trailers; trailers of categories O<(Index)1> and O<(Index)2> with overrun brakes; linear bench test methods for brake controls |
| ISO 8816 | 航空器 固態遙控電源控制器 一般要求 | Aircraft; solid-state remote power controllers; general requirements |
| ISO 8935 | 農林用拖拉機 外部設備控制器的安裝座和開口 | Tractors for agriculture and forestry; mountings and apertures for external equipment controls |
| ISO 9315 | 信息處理系統 軟磁盤機和其主機控制器間的接口 | Information processing systems; interface between flexible disk cartridge drives and their host controllers |
| ISO/IEC 14776-341 | 信息技術.小型計算機系統接口-3(SCSI-3).第341部分:控制器命令(SCC) | Information technology - Small Computer System Interface-3 (SCSI-3) - Part 341: Controller Commands (SCC) |
| ISO/IEC 14776-342 | 信息技術 小型計算機系統接口 第342部分:控制器命令2(SCC-2) | () |
| ISO/TS 15077 | 農業和林業用拖拉機和自動機械.操作控制器的自動力量,移動,鎖定和操作方法 | Tractors and self-propelled machinery for agriculture and forestry - Operator controls - Actuating forces, displacement, location and method of operation |
| 編號 | 中文名稱 | 英文名稱 |