微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| BS 5499-1 | 圖形符號和標志.包括消防安全標志在內的安全性標志.幾何圖形、顏色和布置規范 | Graphical symbols and signs - Safety signs, including fire safety signs - Specification for geometric shapes, colours and layout |
| BS 5499-10 | 包括防火安全標志的安全標志.包括防火安全標志的安全標志使用實施規則 | Safety signs, including fire safety signs - Code of practice for the use of safety signs, including fire safety signs |
| BS 5499-11 | 圖形符號和標志.安全標志，包括防火安全標志.水域安全性標志 | Graphical symbols and signs - Safety signs, including fire safety signs - Water safety signs |
| BS 5499-2 | 消防安全標志、通告和圖形符號.第2部分:自發光標記規范 | Fire safety signs, notices and graphic symbols - Specification for self-luminous fire safety signs |
| BS 5499-4 | 消防安全標志、包括防火災安全符號.逃離路線標記的實施規程 | Safety signs, including fire safety signs - Code of practice for escape route signing |
| BS 5499-5 | 圖形符號和標志.安全性標志，包括防火安全標志.含有特殊安全性意義的標志 | Graphical symbols and signs - Safety signs, including fire safety signs - Signs with specific safety meanings |
| BS 5499-6 | 圖形符號和標志.包括防火安全標志的安全標志.用于安全標志的圖形符號的形成和設計.要求 | Graphical symbols and signs - Safety signs, including fire safety signs - Creation and design of graphical symbols for use in safety signs - Requirements |
| BS 6854-1 | 木工機械安全裝置實用規程.第1部分:一般推薦標準 | Code of practice for safeguarding woodworking machines. General recommendations |
| BS 6854-2 | 木工機械安全裝置實用規程.第2部分:圓鋸木機(裝有旋轉刀具的圓形鋸木機) | Code of practice for safeguarding woodworking machines. Circular sawing machines (sawing machines with rotating tools) |
| BS 6854-3 | 木工機械安全裝置實用規程.第3部分:垂直主軸制模、造模銑和成形機械(用于單面修整的制模機) | Code of practice for safeguarding woodworking machines. Vertical spindle moulding, routing and shaping machines (moulding machines for one side dressing) |
| BS 6854-5 | 木工機械安全裝置實用規程.第5部分:窄帶鋸木機 | Code of practice for safeguarding woodworking machines. Narrow band sawing machines |
| BS 6912-19 | 土方機械安全.機械操作人員座椅的尺寸和要求用規范 | Safety of earth-moving machinery - Specification for dimensions and requirements for operator's seat |
| BS 6912-20 | 運土機械安全性.操作者控制系統 | Safety of earth-moving machinery - Specification for operator's controls |
| BS 6912-21 | 運土機械安全性.照明、信號燈和標記燈、以及反射式反射鏡裝置 | Safety of earth-moving machinery - Specification for lighting, signalling and marking lights, and reflex-reflector devices |
| BS 6912-22.1 | 運土機械安全性.第22部分:駕駛室環境.第1節:綜述和定義 | Safety of earth-moving machinery - Operator enclosure environment - General and definitions |
| BS 6912-22.2 | 運土機械安全性.第22部分:駕駛室環境.第2節:空氣過濾器試驗 | Safety of earth-moving machinery - Operator enclosure environment - Air filter test |
| BS 6912-22.3 | 運土機械安全性.第22部分:駕駛室環境.第3節:駕駛室增壓試驗方法 | Safety of earth-moving machinery - Operator enclosure environment - Operator enclosure pressurization test method |
| BS 6912-22.4 | 運土機械安全性.第22部分:駕駛室環境.第4節:駕駛室的通風、加熱和/或空調試驗法 | Safety of earth-moving machinery - Operator enclosure environment - Operator enclosure ventilation, heating and/or air-conditioning test method |
| BS 6912-22.5 | 運土機械安全性.第22部分:駕駛室環境.第5節:擋風玻璃解凍系統試驗方法 | Safety of earth-moving machinery - Operator enclosure environment - Windscreen defrosting system test method |
| BS 6912-22.6 | 運土機械安全性.第22部分:駕駛室環境.第6節:駕駛室上面太陽能加熱效應的測定 | Safety of earth-moving machinery - Operator enclosure environment - Determination of the effect of solar heating on the operator enclosure |
| BS 6912-23 | 運土機械安全性.第23部分:安全信號和危險圖號.一般原理 | Safety of earth-moving machinery - Safety signs and hazard pictorials - General principles |
| BS 6912-5 | 運土機械安全性.第5部分:最小入口尺寸推薦標準 | Safety of earth-moving machinery. Recommendations for minimum access dimensions |
| BS 6912-8 | 運土機械安全性.第8部分:鉸接式車架鎖緊裝置的性能要求規范 | Safety of earth-moving machinery - Specification for performance requirements of an articulated frame locking device |
| BS 7907 | 提高機械安全性的兒童服裝設計和生產實用規程 | Code of practice for the design and manufacture of children's clothing to promote mechanical safety |
| BS 848-5 | 一般用途風扇.機械安全專用(保護) | Fans for general purposes - Special for mechanical safety (guarding) |
| BS DD CLC/TS 50418 | 機械安全.電感防護設備.無源紅外線防護設備(PIPDs) | Safety of machinery - Electro-sensitive protective equipment - Passive infra-red protective devices (PIPDs) |
| BS DD CLC/TS 61496-2 | 機械安全.電感防護設備.使用有源光電防護器件的設備的特殊要求 | Safety of machinery - Electro-sensitive protective equipment - Particular requirements for equipment using active opto-electronic protective devices (AOPD) |
| BS DD CLC/TS 61496-3 | 機械安全.電感防護設備.響應漫反射的有源光電防護設備的特殊要求(AOPDDR) | Safety of machinery - Electro-sensitive protective equipment - Particular requirements for active opto-electronic protective devices responsive to diffuse reflection (AOPDDR) |
| BS DD CLC/TS 62046 | 機械安全.檢測時人的防護設備的應用 | Safety of machinery - Application of protective equipment to detect the presence of persons |
| BS DD ENV 581-2 | 室外家具.野營、家用和工作用桌椅.桌椅的機械安全性要求和試驗方法 | Outdoor furniture - Seating and tables for camping, domestic and contract use - Mechanical safety requirements and test methods for seating |
| BS EN 1005-2 | 機械安全.人體特性.機械和機械元部件的人工搬運 | Safety of machinery - Human physical performance - Manual handling of machinery and component parts of machinery |
| BS EN 1005-3 | 機械安全.人體特性.機械操作的推薦使用的力極限值 | Safety of machinery - Human physical performance - Recommended force limits for machinery operation |
| BS EN 1005-4 | 機械安全.人體特性.有關機械的工作姿勢和活動的評價 | Safety of machinery - Human physical performance - Evaluation of working postures and movements in relation to machinery |
| BS EN 1005-5 | 機械安全.人體特性.高頻率重復操作的風險評估 | Safety of machinery - Human physical performance - Risk assessment for repetitive handling at high frequency |
| BS EN 1010-1 | 機械安全.印刷和紙加工機械的設計和建造的安全要求.通用要求 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Common requirements |
| BS EN 1010-2 | 機械安全性.印刷機和換紙機的設計和建造的安全要求.包括預壓機械的印刷機和涂漆機 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery |
| BS EN 1010-3 | 機械安全.印刷和紙加工機械的設計和制造的安全要求.切紙機 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Cutting machines |
| BS EN 1010-4 | 機械安全.設計和生產打印機和紙加工機的安全要求.裝訂機、紙加工機和裝飾機 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Bookbinding, paper converting and finishing machines |
| BS EN 1023-2 | 辦公家具.遮板.機械安全性要求 | Office furniture - Screens - Mechanical safety requirements |
| BS EN 1034-13 | 機械安全.造紙和整飾機械的設計和建造用安全要求.第13部分:貨物和裝置除線用機器 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 13: Machines for de-wiring bales and units |
| BS EN 1034-14 | 機械安全.造紙機械和精整機設計和結構的安全要求.卷紙切紙機 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Reel splitter |
| BS EN 1034-2 | 機械安全.造紙機和修整機的設計和建造的安全要求.第2部分:鼓式剝皮機 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2: Barking drums |
| BS EN 1034-22 | 機械安全.紙張制造和整飾機械設計和建造的安全要求.碎木機 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 22: Woodgrinders |
| BS EN 1034-4 | 機械安全.造紙機械和精整機設計和結構的安全要求.碎漿機和裝載工具 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Pulpers and their loading facilities |
| BS EN 1034-6 | 機械安全.造紙和整飾機械的設計和建造用安全要求.第6部分:砑光機 | Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 6: Calender |
| BS EN 1034-7 | 機械安全.紙張制造和整飾機械設計和建造的安全要求.箱 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 7: Chests |
| BS EN 1088 1995 + A1 | 機械安全.與保護裝置結合的聯鎖裝置.設計和選擇原則 | Safety of machinery - Interlocking devices associated with guards - Principles for design and selection |
| BS EN 1093-2 | 機械安全.空氣中有害物質排放的評估.特定污染物排放率測量用示蹤氣體法 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Tracer gas method for the measurement of the emission rate of a given pollutant |
| BS EN 1093-3 | 機械安全.空氣中有害物質排放的評估.第3部分:特定污染物排放率的測量用試驗臺方法 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3: Test bench method for the measurement of the emission rate of a given pollutant |
| BS EN 1093-4 | 機械安全.空氣中有害物質排放的評估.除塵系統的吸收效率.示蹤法 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Capture efficiency of an exhaust system - Tracer method |
| BS EN 12198-1 | 機械安全.評估和降低機器輻射產生的風險.總則 | Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - General principles |
| BS EN 12198-2 | 機械安全.由機器輻射而產生的危害的評估和降低.輻射測量規程 | Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Radiation emission measurement procedure |
| BS EN 12198-3 | 機械安全.機器輻射而產生的風險的評估和降低.通過衰減或屏蔽降低輻射 | Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Reduction of radiation by attenuation or screening |
| BS EN 12750 | 木工機械安全性.四邊造型機 | Safety of woodworking machines - Four-sided moulding machines |
| BS EN 12779 | 木工機械安全.帶固定裝置的碎屑和灰塵排放裝置.安全相關性能和安全要求 | Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety related performances and safety requirements |
| BS EN 12786 | 機械安全.安全標準中振動條款編寫指南 | Safety of machinery - Guidance for the drafting of vibration clauses of safety standards |
| BS EN 13210 | 兒童護理用品.兒童安全背帶、學步繩和類似物品.安全要求和試驗方法 | Child care articles - Children's safety harnesses, reins and similar type articles - Safety requirements and test methods |
| BS EN 13478 | 機械安全性.防火與消防措施 | Safety of machinery - Fire prevention and protection |
| BS EN 13675 | 機械安全.管道成型和軋制機及其精整作業線設備的安全要求 | Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment |
| BS EN 13861 | 機械安全.機械設計中人類工效學應用指南 | Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery |
| BS EN 14010 | 機械安全.摩托車的動力傳動停車設備.設計、生產、裝配和交付使用階段的安全和EMC要求 | Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages |
| BS EN 14656 | 機械安全.鋼和有色金屬用擠壓機的安全要求 | Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals |
| BS EN 14673 | 機械安全.鋼和有色金屬鍛制的液壓動力開模熱鍛鍛壓機的安全要求 | Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals |
| BS EN 1746 | 機械安全.安全標準噪聲條款編寫指南 | Safety of machinery - Guidance for the drafting of the noise clauses of safety standards |
| BS EN 1760-1 | 機械安全.壓力敏感防護裝置.壓力敏感墊和壓力敏感地板的設計和試驗通用規則 | Safety of machinery - Pressure sensitive protective devices - General principles for the design and testing of pressure sensitive mats and pressure sensitive floors |
| BS EN 1760-2 | 機械安全.壓敏防護裝置.壓敏墊和壓敏樓板設計和試驗通用規則 | Safety of machinery - Pressure sensitive protective devices - General principles for the design and testing of pressure sensitive edges and pressure sensitive bars |
| BS EN 1760-3 | 機械安全.壓敏防護裝置.壓敏減震器、板材、線材和類似設備的設計和試驗通用規則 | Safety of machinery - Pressure sensitive protective devices - General principles for the design and testing of pressure sensitive bumpers, plates, wires and similar devices |
| BS EN 1807 | 木工機械安全.帶鋸機械 | Safety of woodworking machines - Band sawing machines |
| BS EN 1837 | 機械安全.機械的整體照明 | Safety of machinery - Integral lighting of machines |
| BS EN 1870-1 | 木工機械安全.圓盤鋸機床.圓盤鋸架(帶和不帶滑動臺)、方板鋸和建筑工地用鋸 | Safety of woodworking machines - Circular sawing machines - Circular saw benches (with and without sliding table), dimension saws and building site saws |
| BS EN 1870-16 | 木工機械安全.圓盤鋸床.V切割用雙斜角鋸床 | Safety of woodworking machines - Circular sawing machines - Double mitre sawing machines for V-cutting |
| BS EN 1870-3 | 木工機械安全.圓盤鋸床.下橫切鋸、兩用下橫切鋸和圓鋸臺 | Safety of woodworking machines - Circular sawing machines - Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches |
| BS EN 294 | 機械安全.避免上肢可觸及危險區的安全距離 | Safety of machinery - Safety distances to prevent danger zones being reached by the upper limbs |
| BS EN 294 | 機械安全.避免上肢可觸及危險區的安全距離 | Safety of machinery - Safety distances to prevent danger zones being reached by the upper limbs |
| BS EN 349 | 機械安全.避免擠壓人體各部位的最小空間 | Safety of machinery - Minimum gaps to avoid crushing of parts of the human body |
| BS EN 4057-405 | 導線電纜扎匝.試驗方法.第405部分:羅盤安全距離 | Cable ties for harnesses - Test methods - Part 405: Compass safe distance |
| BS EN 414 | 機械安全性.安全性標準的起草和報批規則 | Safety of machinery - Rules for the drafting and presentation of safety standards |
| BS EN 415-5 | 包裝機械安全.包裝機械 | Safety of packaging machines - Wrapping machines |
| BS EN 415-7 | 包裝機械安全.組件和二次包裝機械 | Safety of packaging machines - Group and secondary packaging machines |
| BS EN 474-3 | 土方機械安全性.第3部分:裝載機的要求 | Earth-moving machinery - Safety - Requirements for loaders |
| BS EN 474-4 | 土方機械安全性.第4部分:反鏟裝載機的要求 | Earth-moving machinery - Safety - Requirements for backhoe loaders |
| BS EN 50144-2-15 | 手持電動工具的安全.樹籬修剪機的特殊要求 | Safety of hand-held electric motor operated tools - Particular requirements for hedge trimmers |
| BS EN 50144-2-16 | 手持電動工具的安全.用平頭釘釘東西的工具的特殊要求 | Safety of hand-held electric motor operated tools - Particular requirements for tackers |
| BS EN 50144-2-3 | 手持電動工具的安全.研磨機、圓盤砂輪機和拋光機的特殊要求 | Safety of hand-held electric motor operated tools - Particular requirements for grinders, disk type sanders and polishers |
| BS EN 50144-2-7 | 手持電動工具的安全性.噴槍專門要求 | Safety of hand-held electric motor operated tools - Particular requirements for spray guns |
| BS EN 527-2 | 辦公家具.工作臺和寫字臺.機械安全要求 | Office furniture - Work tables and desks - Mechanical safety requirements |
| BS EN 574 | 機械安全性.雙柄控制裝置.功能特性.設計原理 | Safety of machinery - Two-hand control devices - Functional aspects - Principles for design |
| BS EN 581-3 | 戶外家具.野營、家用和辦公用座椅和桌子.桌子的機械安全要求和試驗方法 | Outdoor furniture - Seating and tables for camping, domestic and contract use - Mechanical safety requirements and test methods for tables |
| BS EN 60204-1 | 機械安全性.機械用電氣設備.一般要求 | Safety of machinery - Electrical equipment of machines - General requirements |
| BS EN 60204-32 | 機械安全性.機械用電氣設備.提升機要求 | Safety of machinery - Electrical equipment of machines - Requirements for hoisting machines |
| BS EN 60745-2-1 | 手持式電動工具的安全.電鉆和沖擊鉆的特殊要求 | Hand-held motor-operated electric tools - Safety - Particular requirements for drills and impact drills |
| BS EN 60745-2-11 | 手持式電動工具的安全.往復鋸(曲線鋸和刀鋸)的特殊要求 | Hand-held motor-operated electric tools - Safety - Particular requirements for reciprocating saws (jig and sabre saws) |
| BS EN 60745-2-12 | 手持式電動工具的安全.混凝土振搗器的特殊要求 | Hand-held motor-operated electric tools - Safety Part 2-12:Particular requirements for concrete vibrators |
| BS EN 60745-2-17 | 手持式電動工具的安全.木銑和修整機的特殊要求 | Hand-held motor-operated electric tools - Safety - Particular requirements for routers and trimmers |
| BS EN 60745-2-2 | 手持式電動工具的安全.電動旋具和沖擊扳手的特殊要求 | Hand-held motor-operated electric tools - Safety - Particular requirements for screwdrivers and impact wrenches |
| BS EN 60745-2-4 | 手持式電動工具的安全.盤式除外的砂輪機和拋光機的特殊要求 | Hand-held motor-operated electric tools - Safety - Particular requirements for sanders and polishers other than disk type |
| BS EN 60745-2-5 | 手持式電動工具的安全.圓盤鋸的特殊要求 | Hand-held motor-operated electric tools - Safety - Particular requirements for circular saws |
| BS EN 60745-2-9 | 手持式電動工具的安全.攻絲機的特殊要求 | Hand-held motor-operated electric tools - Safety - Particular requirements for tappers |
| BS EN 61029-2-11 | 移動式電動工具的安全.組合橫切鋸和臺鋸的特殊要求 | Safety of transportable motor-operated tools - Particular requirements for combined mitre and bench saws |
| BS EN 61029-2-4 | 移動式電動工具的安全.臺式磨床的特殊要求 | Safety of transportable motor-operated tools - Particular requirements for bench grinders |
| BS EN 61029-2-8 | 移動式電動工具的安全.單芯軸垂直模壓機的特殊要求 | Safety of transportable motor-operated tools - Particular requirements for single spindle vertical moulders |
| BS EN 61029-2-9 | 移動式電動工具的安全.斜切鋸的特殊要求 | Safety of transportable motor-operated tools - Particular requirements for mitre saws |
| BS EN 61310-1 | 機械安全.指示,標志和活動.第1部分:可視,可聽和可觸模信號要求 | Safety of machinery - Indication, marking and actuation - Requirements for visual, auditory and tactile signals |
| BS EN 61310-2 | 機械安全性.指示,標志和作動.第2部分:標志要求 | Safety of machinery - Indication, marking and actuation - Requirements for marking |
| BS EN 61310-3 | 機械安全性.指示、標志和作動.作動位置和操作要求 | Safety of machinery - Indication, marking and actuation - Requirements for the location and operation of actuators |
| BS EN 61472 | 帶電作業.電壓范圍為72.5 kV至800 kV的交流系統的最小安全距離.計算方法 | Live working - Minimum approach distances for a.c. systems in the voltage range 72,5 kV to 800 kV - A method of calculation |
| BS EN 61496-1 | 機械安全.電敏保護設備.一般要求和試驗 | Safety of machinery - Electro-sensitive protective equipment - General requirements and tests |
| BS EN 61496-3 | 機械安全性.電敏防護設備.防漫反射有源光電子保護器件專門要求 | Safety of machinery - Electro-sensitive protective equipment - Particular requirements for active opto-electronic protective devices responsive to diffuse reflection (AOPDDR) |
| BS EN 61965 | 陰極射線管的機械安全 | Mechanical safety of cathode ray tubes |
| BS EN 62061 | 機械安全.與安全有關的電氣、電子和可編程序電子控制系統的功能安全 | Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems |
| BS EN 811 | 機械的安全性.預防被低處部件碰撞的危險區安全距離 | Safety of machinery - Safety distances to prevent danger zones being reached by the lower limbs |
| BS EN 848-1 | 木工機械安全.帶旋轉刀具的單面鏤銑機.第1部分:單軸立式鏤銑機 | Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: Single spindle vertical moulding machines |
| BS EN 848-2 | 木工機械安全.帶旋轉刀具的單面鏤銑機.第2部分:單軸手動進料/一體進料鏤銑機 | Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: Single spindle hand fed/integrated fed routing machines |
| BS EN 848-3 | 木工機械安全.旋轉刀具單面模壓機械.數控鏜床和靠模銑床 | Safety of woodworking machines - One side moulding machines with rotating tools - Numerically controlled (NC) boring and routing machines |
| BS EN 859 | 木工機械安全.手送表面刨平機械 | Safety of woodworking machines - Handfed surface planing machines |
| BS EN 860 | 木工機械安全.單面厚度刨床 | Safety of woodworking machines - One side thickness planing machines |
| BS EN 861 | 木工機械安全.平面刨床和增厚機 | Safety of woodworking machines - Surface planing and thicknessing machines |
| BS EN 953 | 機械安全的性.防護裝置.固定和移動防護裝置的設計和構造的一般要求 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
| BS EN ISO 10418 | 石油和天然氣工業.近海生產裝置.基礎表面操作安全系統 | Petroleum and natural gas industries - Offshore production installations - Basic surface process safety systems |
| BS EN ISO 11161 | 機械安全.集成制造系統.基本要求 | Safety of machinery - Integrated manufacturing systems - Basic requirements |
| BS EN ISO 11553-1 | 機械安全.激光加工機械.一般安全要求 | Safety of machinery - Laser processing machines - General safety requirements |
| BS EN ISO 11553-2 | 機械安全.激光加工機械.手持式激光加工設備的安全要求 | Safety of machinery - Laser processing machines - Safety requirements for hand-held laser processing devices |
| BS EN ISO 12100-1 | 機械安全.設計基本概念和一般原理.基本術語和方法 | Safety of machinery - Basic concepts, general principles for design - Basic terminology, methodology |
| BS EN ISO 12100-2 | 機械安全.設計基本概念和一般原理.技術原理 | Safety of machinery - Basic concepts, general principles for design - Technical principles |
| BS EN ISO 13849-1 | 機械安全.安全相關的控制系統部件.一般設計原則 | Safety of machinery - Safety-related parts of control systems - General principles for design |
| BS EN ISO 13849-2 | 機械安全.控制系統有關安全部分.確認 | Safety of machinery - Safety-related parts of control systems - Validation |
| BS EN ISO 13850 | 機械安全.緊急停止.設計原則 | Safety of machinery - Emergency stop - Principles for design |
| BS EN ISO 14121-1 | 機械安全.危險評估.原則 | Safety of machinery - Risk assessment - Principles |
| BS EN ISO 14159 | 機械安全.機械設計的衛生要求 | Safety of machinery - Hygiene requirements for the design of machinery |
| BS EN ISO 21469 | 機械安全.附帶產品接觸的潤滑劑.衛生要求 | Safety of machinery - Lubricants with incidental product contact - Hygiene requirements |
| BS ISO 15870 | 工業用機動卡車.安全標志和危險圖示.一般原則 | Powered industrial trucks - Safety signs and hazard pictorials - General principles |
| BS ISO 16069 | 圖形符號.安全標志.安全路徑指示系統(SWGS) | Graphical symbols - Safety signs - Safety way guidance systems (SWGS) |
| BS ISO 17080 | 手持便攜式農業和林業機械與電動草坪和園藝設備.單面產品安全標簽的設計原則 | Manually portable agricultural and forestry machines and powered lawn and garden equipment - Design principles for single-panel product safety labels |
| DD ENV 581-2 | 戶外家具.野營、家用和訂做的座椅和桌子.座椅的機械安全要求和試驗方法 | Outdoor furniture. Seating and tables for camping, domestic and contract use. Mechanical safety requirements and test methods for seating |
| FD E09-027 | 機械安全性.控制系統與安全相關的零部件.第100部分:EN 954-1-1996的應用指南 | Safety of machinery - Safety-related parts of control systems - Part 100 : guide on the use and application of EN 954-1:1996. |
| KT 8 | 機械安全性 | Safety of machinery |
| 編號 | 中文名稱 | 英文名稱 |