微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| NF A91-701 | 表面處理.工廠水箱,管道和設備的識別.安全標志 | (Surface treatment. Identification of workshop tanks, piping and equipment. Safety marking.) |
| NF C75-300 | 手持電動工具的安全.第1部分:一般要求 | (SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS. PART 1 : GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN 50 144-1).) |
| NF C75-305 | 手提式電動工具的安全.第2-5部分:圓盤鋸和圓盤刀 | (Safety of hand-held electric motor operated tools. Part 2-5 : particular requirements for circular saws and circular knives.) |
| NF C79-133 | 機械安全.機器的電氣設備.第11部分:電壓超過1000V.a.c.或1500V.d.c和36KV以下的HV設備的要求 | (Safety of machinery - Electrical equipment of machines - Part 11 : requirements for HV equipement for voltages above 1000 V a.c. or 1500 V d.c. and not exceeding 36 kV.) |
| NF C95-230 | 陰極射線管的機械安全 | (Mechanical safety of cathode ray tubes.) |
| NF D61-061-3 | 室外家具.野營,家用和定約用座位和桌子.第3部分:機械安全要求和桌子的試驗方法 | (OUTDOOR FURNITURE. SEATING AND TABLES FOR CAMPING, DOMESTIC AND CONTRACT USE. PART 3 : MECHANICAL SAFETY REQUIREMENTS AND TEST METHODS FOR TABLES. (EUROPEAN STANDARD EN 581-3).) |
| NF D62-043-2 | 辦公家具.遮板.第2部分:機械安全要求 | (Office furniture - Screens - Part 2 : mechanical safety requirements.) |
| NF E09-010 | 機械安全.防止上肢觸及機器設備危險區的安全距離 | (Safety of machinery. Safety distances to prevent danger zones being reached by the upper limbs.) |
| NF E09-011 | 機械安全.避免人身體部分被擠壓的最小間隙.(歐洲標準EN 349) | (SAFETY OF MACHINERY. MINIMUM GAPS TO AVOID CRUSHING OF PARTS OF THE HUMAN BODY. (EUROPEAN STANDARD EN 349).) |
| NF E09-012 | 機械的安全.第012部分:防止下肢接觸危險區域的安全距離 | (SAFETY OF MACHINERY. SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE LOWER LIMBS. (EUROPEAN STANDARD EN 811).) |
| NF E09-025 | 機械安全.控制系統零部件安全.第1部分:設計的一般原理(歐洲標準EN 954-1) | (SAFETY OF MACHINERY. SAFETY RELATED PARTS OF CONTROL SYSTEMS. PART 1 : GENERAL PRINCIPLES FOR DESIGN. (EUROPEAN STANDARD EN 954-1).) |
| NF E09-037 | 機械安全.雙手控制設備.功能.設計原理(歐洲標準EN 574) | (SAFETY OF MACHINERY. TWO-HAND CONTROL DEVICES. FUNCTIONAL ASPECTS. PRINCIPLES FOR DESIGN. (EUROPEAN STANDARD EN 574).) |
| NF E09-041 | 機械安全.壓敏防護裝置.第2部分:壓敏墊和壓敏棒的設計和試驗通用規則 | (Safety of machinery - Pressure sensitive protective devices - Part 2 : general principles for the design and testing of pressure sensing edges and pressure sensitive bars.) |
| NF E09-070 | 機械安全.對由機器輻射產生的風險的評估和降低.第1部分:總則 | (Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 1 : general principles.) |
| NF E09-071 | 機械安全.機械輻射風險的評定和降低.第2部分:輻射發射測量規則 | (Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 2 : radiation emission measurement procedure.) |
| NF E09-072 | 機械安全.機械輻射風險的評定和降低.第3部分:通過衰減或屏蔽降低輻射 | (Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 3 : reduction of radiation by attenuation or screening.) |
| NF E09-081-11 | 機械安全.空氣中有害物質排放的評估.第11部分:凈化指數 | (Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 11 : decontamination index.) |
| NF E09-081-4 | 機械安全.空氣有害物質排放評估.第4部分:排氣系統俘獲系數.示蹤方法 | (Safety of machinery. Evaluation of the emission of airborne hazardous substances. Part 4 : capture efficiency of an exhaust system. Tracer method.) |
| NF E48-202 | 機械安全.液力系統和部件的安全要求.液壓裝置(歐洲標準EN 982) | (SAFETY OF MACHINERY. SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS. HYDRAULICS. (EUROPEAN STANDARD EN 982).) |
| NF E49-202 | 機械安全.液力系統和部件的安全要求.氣壓裝置(歐洲標準EN 983) | (Safety of machinery. Safety requirements for fluid power systems and their components. Pneumatics.) |
| NF E58-014 | 土方機械.安全標志和危險圖示.一般規則 | (EARTH-MOVING MACHINERY. SAFETY SIGNS AND HAZARD PICTORIALS. GENERAL PRINCIPLES.) |
| NF E85-001 | 機械安全.允許接近機器的固定方式.第1部分:兩種水平之間固定接近方式的選擇 | (Safety of machinery - Permanent means of access to machinery - Part 1 : choice of a fixed means of access between two levels.) |
| NF E85-002 | 機械安全.允許接近機器的固定方式.第2部分:工作平臺和通路 | (Safety of machinery - Permanent means of access to machinery - Part 2 : working platforms and walkways.) |
| NF E85-003 | 機械安全.允許接近機器的固定方式.第3部分:樓梯、梯凳和護欄 | (Safety of machinery - Permanent means of access to machinery - Part 3 : stairs, stepladders and guard-rails.) |
| NF E90-407 | 機械安全.安全標準振動條款的起草指南 | (Safety of machinery - Guidance for the drafting of the vibration clauses of safety standards.) |
| NF Q40-002-3 | 機械安全.紙生產和修整機械設計和制造的安全要求.第3部分:卷紙機、切紙機和折紙機 | (Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3 : winders and slitters, plying machines.) |
| NF Q79-003-3 | 機械安全.印刷和卷紙機的設計和結構安全要求.第3部分:切紙機 | (Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 3 : cutting machines.) |
| NF S30-200 | 機械安全.安全標準的噪音條款的起草指南 | (Safety of machinery. Guidance for the drafting of the noise clauses of safety standards.) |
| NF S60-304 | 防火.安全標志 | (Fire protection. Safety signs.) |
| NF T81-008 | 液態化學產品的運輸和裝卸:內河航行罐船.運輸過程中的安全要求.壓縮空氣機械操作安全設備 | (TRANSPORT AND HANDLING OF LIQUID CHEMICAL PRODUCTS:TANKERS FOR INTERIOR NAVIGATION:SAFETY REQUIREMENTS DURING TRANSFER OPERATIONS - MECHANICALLY OPERATED SAFETY DEVICE BY COMPRESSED AIR.) |
| NF T81-107 | 運輸與裝卸.道路罐車.操作人員的安全.入口與操作安全 | (Transport and handling - Road tankers - Operators safety - Acces and handling securities.) |
| NF X35-005 | 機械安全.機械設計中人類工效學應用指南 | (Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery.) |
| NF X35-101-1 | 機械安全.顯示和控制調節器設計的人類工效學要求.第1部分:人與顯示和控制調節器相互作用的一般原則(歐洲標 | (SAFETY OF MACHINERY. ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS. PART 1 : GENERAL PRINCIPLES FOR HUMAN INTERACTIONS WITH DISPLAYS AND CONTROL ACTUATORS. (EUROPEAN STANDARD EN 894-1).) |
| NF X35-101-2 | 機械安全.顯示和控制調節器設計的人類工效學要求.第2部分:顯示 | (Safety of machinery. Ergonomics requirements for the design of displays and control actuators. Part 2 : displays.) |
| 編號 | 中文名稱 | 英文名稱 |