微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| DIN 4000-70 | 小型變壓器和扼流圈用鐵芯疊片、鐵芯和線圈架的產品特性圖表 | Tabular layouts of article characteristics for core laminations, cores and coil formers for small transformers and chokes |
| DIN 41300-1 | 小型變壓器.M、EI、SM和SE形鐵芯特性數據(有微小材料浪費的EI型) | Small transformers - Characteristic data, M, EI, SM and SE cores (EI-type with small waste of material) |
| DIN 41307-1 | 小型變壓器和扼流圈用附件.EJ型固定搭接片 | Accessory parts for small transformers and chokes; fixing straps for type EI |
| DIN 41307-2 | 小型變壓器和扼流圈用附件.M、EI和UI型安裝角度 | Accessory parts for small transformers and chokes; fixing angles for types M, EI and UI |
| DIN 41307-3 | 小型變壓器和扼流圈的附件.EI.UI和3UI型鐵芯的連接片 | Accessory parts for small transformers and chokes; attachment straps for cores typ E, U and 3 U |
| DIN 41307-4 | 小型變壓器附件和電抗器.UI和3UI型鐵芯固定托架 | Accessory parts for small transformers and chockes; fixing brackets for cores type UI and 3UI |
| DIN 41307-5 | 小型變壓器和扼流圈用附件.E、ED、EE、EF及EK型鐵芯托架.印制電路、水平磁軸 | Accessory parts for small transformers and chokes; brackets for cores type E, ED, EE, EF and EK; printed circuits, magnetic axis horizontal |
| DIN 42402 | 變壓器和電抗器的端子標記 | Terminal markings for power transformers and reactors |
| DIN 42404 | 小型變壓器端子標記.安全絕緣變壓器.可調變壓器和小型扼流器 | Terminal markings for small transformers, safety isolating transformers, variable transformers and small chokes |
| DIN 42500-1 | 50Hz、50至2500kVA三相油浸式配電變壓器.一般要求和對Um小于24kV變壓器的要求 | Three-phase oil-immersed distribution transformers 50 Hz, 50 up to 2500 kVA; general requirements and requirements for transformers U<(Index)m> up to 24 kV; German version HD 428.1 S1:1992 |
| DIN 42500-1/A1 | 50Hz、50至2500kVA三相油浸式配電變壓器.第1部分:一般要求和對Um小于24kV變壓器的要求.修改件1 | Three-phase oil-immersed distribution transformers 50 Hz, 50 up to 2500 kVA - Part 1: General requirements and requirements for transformers U<(Index)m> up to 24 kV; Amendment A1:1995-03; German version HD 428.1 S1/A1:1995 |
| DIN 42500-21 | 最高電壓36Kv以下50Hz.50至2500kVA三相交流油浸式配電變壓器.第2部分:高壓和/或低壓端上帶電纜接線盒的配電 | Three phase oil-immersed distribution transformers 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Part 2: Distribution transformers with cable boxes on the high voltage and/or low voltage side; section 1: General requirements; German version HD 428.2.1 S1:1994 |
| DIN 42500-3 | 操作設備用最高電壓不超過 36 kV 的 50Hz、50 kVA - 2500 kVA 的三相交流油浸式配電變壓器.第3部分:操作設 | Three phase oil-immersed distribution transformers 50 Hz, from 50-up to 2500 kVA, with highest voltage for equipment not exceeding 36 kV - Part 3: Supplementary requirements for transformers with highest voltage for equipment equal to 36 kV; German version HD 428.3 S1:1994 |
| DIN 42500-4 | 操作設備用最高電壓不超過 36 kV 的 50Hz、50 kVA - 2500 kVA 的三相交流油浸式配電變壓器.第4部分:非正弦 | Three-phase oil-immersed distribution transformers 50 Hz, from 50 to 2500 kVA for equipment not exceeding 36 kV - Part 4: Determination of power rating of a transformer loaded with non-sinusoidal currents; German version HD 428.4 S1:1994 |
| DIN 42500-6 | 最高電壓不超過36Kv的設備用50Hz、50至2500kVA的三相油浸式配電變壓器.第6部分:有關增壓式波形槽的要求和試 | Three phase oil-immersed distribution transformers 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not excceeding 36 kV - Part 6: Requirements and tests concerning pressurised corrugated tanks; German version HD 428.6 S1:2002 |
| DIN 42504-1 | 變壓器.裝有斷路分接頭切換或帶載分接頭換接的50Hz、2000-10000KVA和Um小于123KV的三相油浸變壓器.性能參數 | Transformers; three-phase oil immersed type power transformers with off-circuit tapchanger or with on-load tap-changer 2000 to 10000 kVA for 50 Hz and U<(Index)m> up to 123 kV; characteristics |
| DIN 42504-2 | 分別帶斷路分接開關或載荷分接開關的功率變壓器.2000～10000KVA絕緣等級110N以下的主要尺寸和附件 | Powertransformers with off circuit tap-changer resp. on load tap changer; main dimensions and accessories, 2000 to 10000 kVA and up to insulation class 110 N |
| DIN 42508-1 | 變壓器.裝有斷路分接頭切換或帶載分接頭換接的50HZ、12500-80000KVA和Um小于123KV的三相油浸變壓器.性能參 | Transformers; three-phase oil immersed type power transformers with off-circuit tap-changer or with on-load tap-changer 12500 to 80000 kVA for 50 Hz and U<(Index)m> up to 123 kV; characteristics |
| DIN 42508-3 | 變壓器.50Hz、123kV以下用帶斷路分接開關或帶12500至80000kVA帶負荷分接開關的三相油浸變壓器.要求和附件 | Transformers; three-phase oil immersed transformers with off-circuit tap-changer or with on-load tap-changer 12500 to 80000 kVA for 50 Hz and U<(Index)m> up to 123 kV; requirements and accessories |
| DIN 42508-4 | 變壓器.裝有斷路分接頭切換或帶載分接接頭轉換的50Hz、12500至80000kVA和Um小于123kV的三相油浸變壓器.2500 | Transformers; three-phase oil immersed transformers with off-circuit tap-changer or with on-load tap-changer, 12500 to 80000 kVA for 50 Hz and U<(Index)m> 123 kV; main dimensions and weights for 25000 to 40000 kVA |
| DIN 42513 | 變壓器.變壓器和電抗器部件的標記 | Transformers; marking of components for transformers and reactors |
| DIN 42523-1/A1 | 50Hz、100至2500kVA干式變壓器.第1部分:一般要求和對Um小于24kV變壓器的要求.修改件1 | Dry-type transformers 50 Hz, 100 up to 2500 kVA - Part 1: General requirements and requirements for transformers U<(Index)m> up to 24 kV; Amendment 1:1995; German version HD 538.1 S1/A1:1995 |
| DIN 42523-2 | 50Hz100至2500kVA干式變壓器.第2部分:36kV設備用最高電壓變壓器補充規定 | Dry-type transformers 50 Hz, from 100 to 2500 kVA - Part 2: Supplementary requirements for transformers with highest voltage for equipment at 36 kV; German version HD 538.2 S1:1995 |
| DIN 42523-3 | 最高電壓不超過36KV設備用電阻為50Hz、電流100至2500kVA的三相，干式配電變壓器.第3部分:負載無正弦電流的 | Three-phase dry-type distribution transformers 50 Hz, from 100 to 2500 kVA, with highest voltage for equipment not exceeding 36 kV - Part 3: Determination of the power rating of a transformer loaded with non-sinusoidal current; German version HD 538.3 S1:1997 |
| DIN 42534 | 變壓器；戶內和戶外套管.串聯電壓45KV-1000A | Transformers; bushings for indoor and outdoor, series voltage 45 kV to 1000 A |
| DIN 42538 | 變壓器；套管的安裝裝置 | Transformers; Fixing Arrangement for Bushings |
| DIN 42539-1 | 變壓器；戶內和戶外型進線套管.250A至3150A用絕緣等級3N.組件 | Transformers; Bushings for Indoor and Outdoor Types; Insulation Class 3 N for 250 A to 3150 A, Assembly |
| DIN 42539-2 | 變壓器；戶內和戶外型進線套管.250A至3150A用絕緣等級3N.單個零件 | Transformers; Bushings for Indoor and Outdoor Types; Insulation Class 3 N for 250 A to 3150 A, Single Parts |
| DIN 42544 | 變壓器.直通旋塞.三通旋塞.要求 | Transformers; straight-way cocks, three-way cocks; requirements |
| DIN 42545 | 變壓器.集油槽DN25.要求和試驗 | Transformers; oil trap DN 25; requirements and test |
| DIN 42547 | 變壓器和電抗器.銘牌和設計 | Transformers and reactors; rating plates; design |
| DIN 42552 | 變壓器.油位指示器 | Transformers; oil-level-indicator |
| DIN 42553 | 變壓器.防雪放氣裝置.注油塞 | Transformers; de-aerator with snow protection; filling nozzle |
| DIN 42555 | 變壓器油位指示器 | Oil-level-indicator for transformers |
| DIN 42558 | 變壓器.通氣孔和排油孔的鎖緊件 | Transformers; locking pieces for air vent and drain for oil |
| DIN 42561-2 | 變壓器.輥輪.承載能力10噸 | Transformers; rollers; load carrying capacity 10 t |
| DIN 42561-3 | 變壓器.滾子.中心距和軌距 | Transformers; rollers; center-line spacings and rail gauges |
| DIN 42562-1 | 變壓器.帶填料1.2至4.8公斤的硅膠吸濕器變壓器.組件 | Transformers; silica gel breathers with fillings of 1,2 to 4,8 kg; assembly |
| DIN 42562-2 | 變壓器.帶填料1.2至4.8公斤的硅膠吸濕器變壓器.零件 | Transformers; silica gel breathers with fillings of 1,2 to 4,8 kg; components |
| DIN 42565 | 電力變壓器.戶外裝置用葉片直徑350mm風扇. | Power Transformers; Fans, Blade Diameter 350 mm, for Open-air Installation |
| DIN 42567 | 填充量1公斤的變壓器用吸濕器. | Dehydrating breathers for transformers, filling capacity 1 kg |
| DIN 42568 | 變壓器.取樣和排放用15和32公稱內徑的放出閥 | Transformers; outlet valve DN 15 and DN 32 for sampling and discharge |
| DIN 42600-1 | 50Hz儀表用變壓器.絕緣等級0.5-45N（系統最高電壓為0.6-52kV）.通用規范 | Instrument transformers for 50 Hz, insulation class 0,5 to 45 N (highest system voltages 0,6 to 52 kV); general directions |
| DIN 42600-2 | 50Hz、U<指數m>為0.6至52KV的儀表用變壓器.U<指數m>等于0.8KV的電流互感器.主要尺寸 | Instrument transformers for 50 Hz, U<(Index)m> 0,6 to 52 kV; current transformers U<(Index)m>=0,8 kV; main dimensions |
| DIN 42600-3 | 絕緣等級為 0.5、1 N - 45 N 的 50 c/s 的儀表變壓器.第3部分:最重要尺寸的絕緣等級為 10 N - 30 N 變壓器 | Instrument transformers for 50 c/s, insulation class 0,5, 1 N to 45 N; voltage transformers, insulation class 10 N to 30 N, most important dimensions |
| DIN 42600-4 | 50Hz、HSV0.6-52KV的儀表用變壓器.小型結構Um12KV電流互感器（支承式絕緣子）主要尺寸，戶內型 | Instrument transformers for 50 Hz, HSV 0,6 to 52 kV; currenttransformers (support-typ-insulator), HSV 12 kV, small design, main dimensions, indoor type |
| DIN 42600-5 | 50Hz、0.6-52KV的儀表用變壓器.電流互感器（支承式絕緣子）Um12-36KV.大型.主要尺寸.戶內型 | Instrument transformers for 50 Hz, HSV 0,6 to 52 kV; current transformers (support-type-insulator) HSV 12 to 36 kV, large design, main dimensions, indoor type |
| DIN 42600-7 | 50Hz、Um小于52KV的儀表用變壓器.電壓變壓器Um12KV.狹長型.主要尺寸.戶內型 | Instrument transformers for 50 Hz, U<(Index)m> to 52 kV; voltage transformers U<(Index)m> 12 kV; narrow design, main dimensions, indoor type |
| DIN 42600-8 | 50Hz、Um0.6-52KV的儀表用變壓器.電流互感器（支承式絕緣子）Um12和24KV.狹長型.主要尺寸.戶內型 | Instrument transformers for 50 Hz, U<(Index)m> 0,6 to 52 kV; current transformers (support-type-insulators) U<(Index)m> 12 and 24 kV; narrow design, main dimensions, indoor type |
| DIN 42600-9 | 50Hz、Um0.6-52KV的儀表用變壓器.電壓變壓器Um12和24KV.狹長型.主要尺寸.戶內型 | Instruments transformers for 50 Hz, U<(Index)m> 0,6 to 52 kV; voltage transformers U<(Index)m> 12 and 24 kV; narrow design, main dimensions, indoor type |
| DIN 42603 | 儀器變壓器.額定值銘牌 | Instrument transformers; rating plates |
| DIN 43101-5 | 電力牽引用機車車輛.第5部分:變壓器術語 | Rolling stock for electric traction; terms for transformers |
| DIN 43675-1 | 第1部分:變壓器用額定值在 400 和 3150 A 之間的連接螺栓和電壓小于 60 kV 穿墻套管的矩形斷面連接器 | Rectangular-section connectors for terminal studs rated between 400 and 3150 A for power transformer- and wallbushings below 60 kV |
| DIN 43675-2 | 柱螺栓用連接件.戶外變壓器套管的扁連接件.Um24和36KV.5和8kA | Connectors for terminal studs; flat connectors for outdoor transformer bushings; U<(Index)m> 24 and 36 kV, 5 and 8 kA |
| DIN 43675-5 | 第5部分:變壓器套管的額定為 1000 A 的終端接線柱用八角連接器 | Octagon connectors for terminal studs, rated over 10000 A, for transformer-bushings |
| DIN 43857-3 | 安裝在最大額定電流可達 60 A 的無儀表變壓器模壓絕緣外殼的瓦時計.第3部分:單相計終端電度表蓋的主要尺寸 | Watthour meters in moulded insulation case without instrument transformers, up to 60 A rated maximum current; principal dimensions for meter terminal cover for single-phase meters |
| DIN 43857-4 | 安裝在最大額定電流可達 60 A 的無儀表變壓器模壓絕緣外殼的瓦時計.第4部分:多相計終端電度表蓋的主要尺寸 | Watthour meters in moulded insulation case without instrument transformers, up to 60 A rated maximum current; principal dimensions for meter terminal cover for poly-phase meters |
| DIN 43857-5 | 最大額定電流在60A以下無儀表變壓器的模壓殼體的電度表.第5部分.端子蓋的主要尺寸 | Watthour meters in moulded case without instrument transformers up to 60 A rated maximum current - Part 5: Principal dimensions for terminal cover |
| DIN 44766-2 | 電阻焊變壓器；吊掛式.尺寸、特性 | Resistance welding transformers; suspension type, dimensions, characteristics |
| DIN 44766-3 | 電阻焊變壓器；法蘭連接的變壓器；尺寸.特性 | Resistance welding transformers; transformers with flanged joints; dimensions, characteristics |
| DIN 44767 | 200A.550V電阻焊接變壓器初級線圈連接裝置耦合器 | Appliance Coupling for the Primary Connection of Resistance Welding Transformers, 200 A 550 V |
| DIN EN 125200 | 分規范.線性變壓器用磁氧體鐵芯 | Sectional specification: magnetic oxide cores for linear transformers; german version EN 125200:1991 |
| DIN EN 125400 | 分規范.感應線圈和調諧變壓器中的磁氧體鐵芯用調節器 | Sectional specification: adjusters used with magnetic oxide cores for use in inductors and tuned transformers; german version EN 125400:1991 |
| DIN EN 125401 | 空白詳細規范.感應線圈和調諧變壓器中的磁氧體鐵芯用調節器 | Blank detail specification: adjusters used with magnetic oxide (ferrite) cores for use in inductors and tuned transformers; german version EN 125401:1991 |
| DIN EN 2591-704 | 航空航天系列.光電連接件.試驗方法.第704部分:電氣元件.耦合器變壓器轉換比測量 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 704: Electrical elements; Measurement of turns ratio on a transformer used in a coupler; German and English version EN 2591-704:2001 |
| DIN EN 50152-3-2 | 鐵路設施.固定裝置.交流電開關的特殊要求.第3-2部分:交流牽引系統專用測量、控制和保護裝置.單相電流變壓器 | Railway applications - Fixed installations; Particular requirements for AC switchgear - Part 3-2: Measurement, control and protection devices for specific use in AC traction systems; Single-phase current transformers; German version EN 50152-3-2:2001 |
| DIN EN 50152-3-3 | 鐵路設施.固定裝置.交流電開關的特殊要求.第3-3部分:交流牽引系統專用測量、控制和保護裝置.單相感應電壓變 | Railway applications - Fixed installations; Particular requirements for AC switchgear - Part 3-3: Measurement, control and protection devices for specific use in AC traction systems; Single-phase-inductive voltage transformers; German version EN 50152-3-3:2001 |
| DIN EN 50180 Bb.1 | 充液式變壓器用大于1kV小于等于36kV的250A到315KA的套管 | Bushings above 1 kV up to 36 kV and from 250 A to 3,15 kA for liquid filled transformers - Constructional details of components |
| DIN EN 50180 Bb.2 | 充油變壓器用1kV-36kV及250A-3.15kA襯套.結構緊固件 | Bushings above 1 kV up to 36 kV and from 250 A to 3,15 kA for liquid filled transformers - Constructional details of fastening |
| DIN EN 50180 | 已充裝液體的變壓器用1kV以上至36kV和250A至3,15kA的套管 | Bushings above 1 kV up to 36 kV and from 250 A to 3,15 kA for liquid filled transformers; German version EN 50180:1997 + Corrigendum 1998 |
| DIN EN 50181 | 裝液變壓器除外的其它設備用電壓1kV以上至36kV,電流從250A至1,25kA的插接式套管 | Plug-in type bushings above 1 kV up to 36 kV and from 250 A to 1,25 kA for equipment other than filled transformers; German version EN 50181:1997 |
| DIN EN 50216-1 | 電力變壓器和電抗器配件.第1部分:總則; 德文版本 EN 50216-1:2002 | Power transformer and reactor fittings - Part 1: General; German version EN 50216-1:2002 |
| DIN EN 50216-2 | 電力變壓器和電抗器配件.第2部分:帶油枕的液體浸沒式變壓器和電抗器用氣動和油動繼電器; 德文版本 EN 50216 | Power transformer and reactor fittings - Part 2: Gas and oil actuated relay for liquid immersed transformers and reactors with conservator; German version EN 50216-2:2002 |
| DIN EN 50216-2/A1 | 電力變壓器和電抗器配件.第2部分:帶儲油箱的液浸變壓器和電抗器用氣體和油驅動的繼電器.修改件A1 | Power transformer and reactor fittings - Part 2: Gas and oil actuated relay for liquid immersed transformers and reactors with conservator; Amendment A1; German version EN 50216-2:2002/A1:2002 |
| DIN EN 50216-3 | 電力變壓器和電抗器配件.第3部分:無氣墊的密封液體浸沒式變壓器和電抗器用保護繼電器; 德文版本 EN 50216-3 | Power transformer and reactor fittings - Part 3: Protective relay for hermetically sealed liquid-immersed transformers and reactors without gaseous cushion; German version EN 50216-3:2002 |
| DIN EN 50216-3/A1 | 電力變壓器和電抗器配件.第3部分:密封液浸式變壓器和無氣墊電抗器用保護繼電器.修改件A1 | Power transformer and reactor fittings - Part 3: Protective relay for hermetically sealed liquid-immersed transformers and reactors without gaseous cushion; Amendment A1; German version EN 50216-3:2002/A1:2002 |
| DIN EN 50216-4 | 電力變壓器和電抗器配件.第4部分:基本附件(接地終端、排放和填充設備、溫度計套和輪組件); 德文版本 EN 502 | Power transformer and reactor fittings - Part 4: Basic accessories (earthing terminal, drain and filling devices, thermometer pocket, wheel assembly); German version EN 50216-4:2002 |
| DIN EN 50216-5 | 電力變壓器和電抗器配件.第5部分:液位計、壓力裝置和流量指示器、壓力釋放裝置和脫水通氣裝置 | Power transformer and reactor fittings - Part 5: Liquid level, pressure and flow indicators, pressure relief devices and dehydrating breathers; German version EN 50216-5:2002 + A1:2002 + A2:2005 |
| DIN EN 50216-6 | 電力變壓器和電抗器配件.第6部分:冷卻設備.油浸變壓器的可移動式散熱器; 德文版本 EN 50216-6:2002 | Power transformer and reactor fittings - Part 6: Cooling equipment; Removable radiators for oil-immersed transformers; German version EN 50216-6:2002 |
| DIN EN 50216-7 | 電力變壓器和電抗器配件.第7部分:變壓器油用電力泵; 德文版本 EN 50216-7:2002 | Power transformer and reactor fittings - Part 7: Electric pumps for transformer oil; German version EN 50216-7:2002 |
| DIN EN 50243 | 充液體變壓器用 24 kV、36 kV、5 kA 和 8 kA 的戶外套管; 德文版本 EN 50243:2002 | Outdoor bushings for 24 kV and 36 kV and for 5 kA and 8 kA, for liquid filled transformers; German version EN 50243:2002 |
| DIN EN 50299 Berichtigung 1 | 設備最高電壓為72.5kV到550kV的變壓器和反應器用油浸式電纜連接組件 | Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment U<(Index)m> from 72,5 kV to 550 kV; German version EN 50299:2002, Corrigenda to DIN EN 50299:2003-10 |
| DIN EN 50299 | U<指數m>設備的最高電壓從72.5kV-550kV的變壓器和電抗器用油浸式電纜連接組件 | Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment U<(Index)m> from 72,5 kV to 550 kV; German version EN 50299:2002 |
| DIN EN 50329 | 鐵路設施.固定式裝置.牽引式變壓器 | Railway applications - Fixed installations - Traction transformers; German version EN 50329:2003 |
| DIN EN 50336 | 不超過36kV的變壓器和電抗器電纜箱用套管; 德文版本 EN 50336:2002 | Bushings for transformer and reactor cable boxes not exceeding 36 kV; German version EN 50336:2002 |
| DIN EN 50386 | 液浸式變壓器用1kV及以下且250 A至5 kA的套管 | Bushings up to 1 kV and from 250 A to 5 kA, for liquid filled transformers; German version EN 50386:2002 |
| DIN EN 50387 | 液浸式變壓器用1kV及以下且1.25 KA至5 kA的母線套管 | Busbar bushings up to 1 kV and from 1,25 kA to 5 kA, for liquid filled transformers; German version EN 50387:2002 |
| DIN EN 60044-5 Berichtigung 1 | 儀表用變壓器.第5部分:電容電壓互感器.DIN EN 60044-5 (VDE 0414-44-5)-2005的技術勘誤 | Instrument transformers - Part 5: Capacitor voltage transformers (IEC 60044-5:2004); German version EN 60044-5:2004, Corrigenda to DIN EN 60044-5 (VDE 0414-44-5):2005-03 |
| DIN EN 60044-8 | 儀表變壓器.第8部分:電子流變壓器 | Instrument transformers - Part 8: Electronic current transformers (IEC 60044-8:2002); German version EN 60044-8:2002 |
| DIN EN 60076-1 | 電力變壓器.第1部分:總則 (IEC 60076-1:1993、修訂版 + A1:1999); 德文版本 EN 60076-1:1997 + A1:2000 + A | Power transformers - Part 1: General (IEC 60076-1:1993, modified + A1:1999); German version EN 60076-1:1997 + A1:2000 + A12:2002 |
| DIN EN 60076-10 | 電力變壓器.第10部分:聲級測定 | Power transformers - Part 10: Determination of sound levels (IEC 60076-10:2001); German version EN 60076-10:2001 |
| DIN EN 60076-11 | 電力變壓器.第11部分:干式變壓器 | Power transformers - Part 11: Dry-type transformers (IEC 60076-11:2004); German version EN 60076-11:2004 |
| DIN EN 60076-2 | 電力變壓器.第2部分:升溫 | Power transformers - Part 2: Temperature rise (IEC 60076-2:1993, modified); German version EN 60076-2:1997 |
| DIN EN 60076-3 | 電力變壓器.第3部分:絕緣級別,露天介電試驗和外部間隙 | Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air (IEC 60076-3:2000 + Corrigendum 2000); German version EN 60076-3:2001 |
| DIN EN 60076-4 | 電力變壓器.第4部分:閃電脈沖和開關脈沖試驗指南.電力變壓器和電抗器 | Power transformers - Part 4: Guide to lightning impulse and switching impulse testing; Power transformers and reactors (IEC 60076-4:2002); German version EN 60076-4:2002 |
| DIN EN 60076-5 | 電力變壓器.第5部分:抗短路能力 | Power transformers - Part 5: Ability to withstand short circuit (IEC 60076-5:2000); German version EN 60076-5:2000 |
| DIN EN 60296 | 電工用液體.變壓器和開關設備用未使用過的礦物絕緣油 | Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear (IEC 60296:2003); German version EN 60296:2004 + Corrigendum:2004 |
| DIN EN 60310 | 鐵路設施.鐵路車輛用牽引變壓器和電感器 | Railway applications - Traction transformers and inductors on board rolling stock (IEC 60310:2004); German version EN 60310:2004 |
| DIN EN 60401-3 | 軟磁材料制芯的術語和命名.第3部分:寫入變壓器和電感器磁芯制造廠產品目錄中的數據格式指南 | Terms and nomenclature for cores made of magnetically soft ferrites - Part 3: Guidelines on the format of data appearing in manufacturers' catalogues of transformer and inductor cores (IEC 60401-3:2003); German version EN 60401-3:2003 |
| DIN EN 60598-2-6 | 燈具.第2部分:特殊要求.第6節:白熾燈用帶插入變壓器的燈具 | Luminaires - Part 2: Particular requirements; section 6: Luminaires with built-in transformers for filament lamps (IEC 60598-2-6:1994); German version EN 60598-2-6:1994 |
| DIN EN 60598-2-6/A1 | 燈具.第2部分:特殊要求.第6節:白熾燈用帶插入變壓器或變流器的燈具 | Luminaires - Part 2: Particular requirements; section 6: Luminaires with built-in transformers or converters for filament lamps (IEC 60598-2-6:1994/A1:1996); German version EN 60598-2-6/A1:1997 |
| DIN EN 60740-1 | 變壓器和電感器用疊層鐵芯.第1部分:機械和電氣特性(IEC 60740-1-2005).德文版本 EN 60740-1 | Laminations for transformers and inductors - Part 1: Mechanical and electrical characteristics (IEC 60740-1:2005); German version EN 60740-1:2005 |
| DIN EN 60852-4 | 電信和電子設備用變壓器和電感器的外形尺寸.第4部分:使用YEI-2型疊片的變壓器和電感器 | Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 4: Transformers and inductors using YUI-2 laminations (IEC 60852-4:1996); German version EN 60852-4:1996 |
| DIN EN 61007 | 電子和電信設備用變壓器和感應器.測量方法和試驗程序 | Transformers and inductors for use in electronic and telecommunication equipment - Measuring methods and test procedures (IEC 61007:1994, modified); German version EN 61007:1997 |
| DIN EN 61021-1 | 電信和電氣設備變壓器和電感器疊片鐵心包.第1部分:尺寸 | Laminated core packages for transformers and inductors used in telecommunication and electronic equipment - Part 1: Dimensions (IEC 61021-1:1990); German version EN 61021-1:1997 |
| DIN EN 61021-2 | 電信和電氣設備用的變壓器和電感器的疊片鐵心包.第2部分:用YEE 2 疊片鐵芯的電器性能 | Laminated core packages for transformers and inductors for use in telecommunication and electronic equipment - Part 2: Electrical characteristics for cores using YEE 2 laminations (IEC 61021-2:1995); German version EN 61021-2:1997 |
| DIN EN 61050 | 空載輸出電壓超過1000伏的管形放電燈變壓器(通稱霓虹燈變壓器).一般要求和安全要求 | Transformers for tubular discharge lamps having a no-load output voltage exceeding 1000 V (generally called neon-transformers) - General and safety requirements (IEC 61050:1991 + Corrigendum March:1992, modified); German version EN 61050:1994 |
| DIN EN 61203 | 電工用合成有機酯.設備變壓器酯維護指南 | Synthetic organic esters for electrical purposes - Guide for maintenance of transformer esters in equipment (IEC 61203:1992); German version EN 61203:1994 |
| DIN EN 61248-1 | 電子和電信設備的變壓器和電感器.第1部份:總規范 | Transformers and inductors for use in electronic and telecommunication equipment - Part 1: Generic specification (IEC 61248-1:1996); German version EN 61248-1:1997 |
| DIN EN 61248-2 | 電子和電信設備的變壓器和電感器.第2部份:以性能批準程序為基礎的信號變壓器分規范 | Transformers and inductors for use in electronic and telecommunication equipment - Part 2: Sectional specification for signal transformers on the basis of the capability approval procedure (IEC 61248-2:1996); German version EN 61248-2:1997 |
| DIN EN 61248-3 | 電子和電信設備用變壓器和電感器.第3部份:以性能批準程序為基礎的電力變壓器分規范 | Transformers and inductors for use in electronic and telecommunication equipment - Part 3: Sectional specification for power transformers on the basis of the capability approval procedure (IEC 61248-3:1996); German version EN 61248-3:1997 |
| DIN EN 61248-4 | 電子和電信設備用變壓器和電感器.第4部分:以性能批準程序為基礎的開關模式供電用電力變壓器分規范 | Transformers and inductors for use in electronic and telecommunication equipment - Part 4: Sectional specification for power transformers for switched mode power supplies (SMPS) on the basis of the capability approval procedure (IEC 61248-4:1996); German version EN 61248-4:1997 |
| DIN EN 61248-5 | 電子和電信設備用變壓器和電感器.第5部分:以性能批準程序為基礎的脈沖變壓器分規范 | Transformers and inductors for use in electronic and telecommunication equipment - Part 5: Sectional specification for pulse transformers on the basis of the capability approval procedure (IEC 61248-5:1996); German version EN 61248-5:1997 |
| DIN EN 61248-6 | 電子和電信設備用變壓器和電感器.第6部分:以性能批準程序為基礎的電感器分規范 | Transformers and inductors for use in electronic and telecommunication equipment - Part 6: Sectional specification for inductors on the basis of the capability approval procedure (IEC 61248-6:1996); German version EN 61248-6:1997 |
| DIN EN 61248-7 | 電子和電信設備變壓器和電感器.第7部分:基于合格認證的HF-電感器和ZF-變壓器分規范 | Transformers and inductors for use in electronic and telecommunication equipment - Part 7: Sectional specification for high frequency inductors and intermediate frequency transformers on the basis of the capability approval procedure (IEC 61248-7:1996); German version EN 61248-7:1997 |
| DIN EN 61378-1 | 變頻變壓器.第1部分:工業用變壓器 | Convertor transformers - Part 1: Transformers for industrial applications (IEC 61378-1:1997); German version EN 61378-1:1998 + Corrigendum 1998 |
| DIN EN 61378-2 | 轉換器變壓器.第2部分:高壓直流轉換器(HVDC)用變壓器 (IEC 61378-2:2001); 德文版本 EN 61378-2:2001 | Convertor transformers - Part 2: Transformers for HVDC applications (IEC 61378-2:2001); German version EN 61378-2:2001 |
| DIN EN 61558-2-1 | 電力變壓器,供電設備及類似設備的安全.第2-1部分:一般用途網絡變壓器的特殊要求 | Safety of power transformers, power supply units and similar - Part 2-1: Particular requirements for separating transformers for general use (IEC 61558-2-1:1997); German version EN 61558-2-1:1997 |
| DIN EN 61558-2-12 | 電力變壓器、供電設備及類似裝置的安全性.第2-12部分:恒壓變壓器的特殊要求 (IEC 61558-2-12:2001); 德文版 | Safety of power transformers, power supply units and similar devices - Part 2-12: Particular requirements for constant voltage transformers (IEC 61558-2-12:2001); German version EN 61558-2-12:2001 |
| DIN EN 61558-2-13 | 電力變壓器、電源裝置及類似設備的安全.第2-13部分:通用自耦變壓器的特殊要求 | Safety of power transformers, power supply units and similar devices - Part 2-13: Particular requirements for auto-transformers for general use (IEC 61558-2-13:1999); German version EN 61558-2-13:2000 |
| DIN EN 61558-2-15 | 電力變壓器、供電裝置和類似件設備的安全性.第2-15部分:醫療場地供電用絕緣變壓器的特殊要求 (IEC 61558-2- | Safety of power transformers, power supply units and similar - Part 2-15: Particular requirements for isolating transformers for the supply of medical locations (IEC 61558-2-15:1999, modified); German version EN 61558-2-15:2001 |
| DIN EN 61558-2-17 | 電力變壓器、供電設備及類似設備的安全性.第2-17部分:開關式供電安全變壓器特殊要求 | Safety of power transformers, power supply units and similar - Part 2-17: Particular requirements for safety isolating transformers for switch mode power supplies (IEC 61558-2-17:1997); German version EN 61558-2-17:1997 |
| DIN EN 61558-2-19 | 電力變壓器、供電設備及類似設備的安全性.第2-19部分:擾動衰減變壓器特殊要求 | Safety of power transformers, power supply units and similar devices - Part 2-19: Particular requirements for perturbation attenuation transformers (IEC 61558-2-19:2000); German version EN 61558-2-19:2001 |
| DIN EN 61558-2-2 | 電力變壓器、供電設備及類似設備的安全性.第2-2部分:控制變壓器特殊要求 | Safety of power transformers, power supply units and similar - Part 2-2: Particular requirements for control transformers (IEC 61558-2-2:1997); German version EN 61558-2-2:1998 + Corrigendum 1998-02 |
| DIN EN 61558-2-20 | 電力變壓器、供電裝置和類似裝置的安全性.第2-20部分:小型電抗器特殊要求 | Safety of power transformers, power supply units and similar devices - Part 2-20: Particular requirements for small reactors (IEC 61558-2-20:2000); German version EN 61558-2-20:2000 |
| DIN EN 61558-2-23 | 電力變壓器、供電裝置和類似裝置的安全性.第2-23部分:施工工地變壓器特殊要求 | Safety of power transformers, power supply units and similar devices - Part 2-23: Particular requirements for transformers for construction sites (IEC 61558-2-23:2000); German version EN 61558-2-23:2000 |
| DIN EN 61558-2-3 | 電力變壓器、電源裝置及類似設備的安全.第2-3部分:燃氣及燃油燃燒器用點火變壓器的特殊要求 | Safety of power transformers, power supply units and similar devices - Part 2-3: Particular requirements for ignition transformers for gas and oil burners (IEC 61558-2-3:1999); German version EN 61558-2-3:2000 |
| DIN EN 61558-2-4 | 電力變壓器安全性.供電設備及類似設備.第2-4部分:普通隔離變壓器特殊要求 | Safety of power transformers, power supply units and similar - Part 2-4: Particular requirements for isolating transformers for general use (IEC 61558-2-4:1997); German version EN 61558-2-4:1997 |
| DIN EN 61558-2-5 | 電力變壓器安全性.供電設備及類似設備.第2-5部分:電動剃須刀插座變壓器和電動剃須刀插座組件特殊要求 | Safety of power transformers, power supply units and similar - Part 2-5: Particular requirements for control transformers (IEC 61558-2-5:1997); German version EN 61558-2-5:1998 |
| DIN EN 61558-2-5/A11 | 電力變壓器、供電設備及類似設備的安全.第2-5部分:剃須刀變壓器和剃須刀電源裝置的特殊要求 | Safety of power transformers, power supply units and similar - Part 2-5: Particular requirements for shaver transformers and shaver supply units; German version EN 61558-2-5:1998/A11:2004 |
| DIN EN 61558-2-6 | 電力變壓器安全性.供電設備及類似設備.第2-6部分:普通安全變壓器特殊要求 | Safety of power transformers, power supply units and similar - Part 2-6: Particular requirements for safety isolating transformers for general use (IEC 61558-2-6:1997); German version EN 61558-2-6:1997 |
| DIN EN 61558-2-7 | 電力變壓器安全性.供電設備及類似設備.第2部分:玩具用變壓器特殊要求 | Safety of power transformers, power supply units and similar - Part 2-7: Particular requirements for transformers for toys (IEC 61558-2-7:1997, modified); German version EN 61558-2-7:1997 |
| DIN EN 61558-2-7/A11 | 電力變壓器、供電設備及類似設備安全性.第2-7部分:玩具變壓器特殊要求.修改件A11 | Safety of power transformers, power supply units and similar - Part 2-7: Particular requirements for transformers for toys; Amendment A11; German version EN 61558-2-7/A11:2002 |
| DIN EN 61558-2-8 | 電力變壓器安全性.供電設備及類似設備.第2-8部分:鈴和鐘變壓器的特殊要求 | Safety of small power transformers, power supply units and similar - Part 2-8: Particular requirements for bell and chime transformers (IEC 61558-2-8:1998); German version EN 61558-2-8:1998 |
| DIN EN 61558-2-9 | 電力變壓器、供電設備及類似設備安全性.第2-9部分:Ⅲ類手提鎢絲燈變壓器特殊要求 | Safety of power transformers, power supply units and similar products - Part 2-9: Particular requirements for transformers for class III handlamps for tungsten filament lamps (IEC 61558-2-9:2002); German version EN 61558-2-9:2003 |
| DIN EN 61596 | 電感器和變壓器用的磁氧化EP芯和相關部件.尺寸 | Magnetic oxide EP-cores and associated parts for use in inductors and transformers - Dimensions (IEC 61596:1995); German version EN 61596:1997 |
| DIN EN 61797-1 | 電信和電子設備變壓器和感應器.線圈架主要尺寸.第1部分:疊層鐵芯線圈架 | Transformers and inductors for use in telecommunication and electronic equipment - Main dimensions of coil formers - Part 1: Coil formers for laminated cores (IEC 61797-1:1996); German version EN 61797-1:1996 |
| DIN EN 61823 | 機場照明和航路信用電氣設備.AGL系列變壓器 | Electrical installations for lighting and beaconing of aerodromes - AGL series transformers (IEC 61823:2002, modified); German version EN 61823:2003 |
| DIN EN 62041 | 電力變壓器、電源器件、電抗器和類似產品.EMC要求 | Power transformers, power supply units, reactors and similar products - EMC requirements (IEC 62041:2003); German version EN 62041:2003 |
| DIN EN ISO 5826 | 電阻焊設備.變壓器.適用于所有變壓器的通用規范 | Resistance welding equipment - Transformers - General specifications applicable to all transformers (ISO 5826:1999); German version EN ISO 5826:2003 |
| DIN EN ISO 7284 | 電阻焊設備.汽車工業用多點點焊的兩個分立副線圈變壓器專用規范 | Resistance welding equipment - Particular specifications applicable to transformers with two separate secondary windings for multi-spot welding as used in the automobile industry (ISO 7284:1993); German version EN ISO 7284:1996 |
| DIN IEC 60740-2 | 電信和電子設備變壓器和電感器鐵芯片.第2部分:軟磁金屬材料制鐵芯片最小漏磁性規范 | Laminations for transformers and inductors for use in telecommunication and electronic equipment - Part 2: Specification for the minimum permeabilities of laminations made of soft magnetic metallic materials (IEC 60740-2:1993) |
| DIN IEC 60852-1 | 電信和電子設備變壓器和電感器的外形尺寸.第1部分:使用YEI-1型疊片的變壓器和電感器 | Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment; part 1: transformers and inductors using YEI 1 laminations; identical with IEC 60852-1:1986 |
| DIN IEC 60852-2 | 電信和電子設備用變壓器和電感器的外形尺寸.第2部分:印制電路板安裝用帶YEx-2芯的變壓器和電感器 | Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment; part 2: transformers and inductors using YEx 2 laminations for printed wiring board mounting; identical with IEC 60852-2:1992 |
| DIN IEC 60852-5 | 電信和電子設備用變壓器和電感器的外形尺寸.第5部分:使用C鐵芯的Q系列變壓器和電感器 | Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 5: Transformers and inductors using the series Q of C-cores (IEC 60852-2:1994) |
| DIN IEC 60944 | 硅酮變壓器油維護指南 | Guide for the maintenance of silicone transformer liquids; identical with IEC 60944:1988 |
| DIN IEC 61186-1 | 電信和電子設備用變壓器和電感器.鐵芯和組件命名.第1部分:疊片鐵芯 | Transformers and inductors for use in telecommunication and electronic equipment; designations for cores and assemblies; part 1: laminated cores; identical with IEC 61186-1:1992 |
| DIN ISO 10656 | 電阻焊接.焊槍用集成變壓器(ISO 10656-1996, 包括技術勘誤表 1-2000) | Electric resistance welding - Integrated transformers for welding guns (ISO 10656:1996, including Technical Corrigendum 1:2000) |
| DIN ISO 12166 | 電阻焊設備.汽車工業中多點焊接用帶一個副線圈的變壓器的特殊規范 (ISO 12166-1997) | Resistance welding equipment - Particular specifications applicable to transformers with one secondary winding for multispot welding, as used in the automobile industry (ISO 12166:1997) |
| DIN VDE 0119-206-3 | 鐵路車輛狀況.電力和牽引系統、列車電氣設備.第206-3部分:主變壓器 | State of railway vehicles - Electric and traction systems, train electrical equipment - Part 206-3: Main transformers |
| DIN VDE 0370-2 | 絕緣油.變壓器和開關裝置用的絕緣油 | Insulating oils; Insulating oils in service in transformers and switchgear |
| DIN VDE 0414-6 | 儀表用變壓器.電壓電平Um52Kv以下用三相電壓變壓器 | Instrument transformers - Three-phase voltage transformers for voltage levels having U<(Index)m> up to 52 kV; German version HD 587 S1:1993 |
| DIN VDE 0532-14 | 變壓器與電抗器.第14部分:套管的外部保護火花間隙 | Transformers and reactors - Part 14: External protective spark gaps on bushings |
| DIN VDE 0532-21 | 變壓器和電抗器.起動變壓器和起動電抗器.[VDE 規范] | Transformers and reactors; starting transformers and starting reactors [VDE Specification] |
| DIN VDE 0532-222 | 設備最高電壓不超過36 kV的50 HZ,50至2500 kVA三相交流油浸配電變壓器.第2部分:高壓側和/或低壓側帶電纜接 | Three-phase oil-immersed distribution transformers 50 Hz, from 50 to 2500 kVA, with highest voltage for equipment not exceeding 36 kV - Part 2: Distribution transformers with cable boxes on the high-voltage and/or low-voltage side; section 2: Cable boxes type 1 for use on distribution transformers meeting the requirements of HD 428.2.1 S1; German version HD 428.2.2 S1:1997 |
| DIN VDE 0532-223 | 不超過36kV電壓的設備用的帶高壓的50Hz,50至2500kVA的三相油浸配電變壓器.第2部分:高壓側和/或低壓側上帶 | Three-phase oil-immersed distribution transformers 50 Hz, from 50 to 2500 kVA, with highest voltage for equipment not exceeding 36 kV - Part 2: Distribution transformers with cable boxes on the high-voltage and/or low-voltage side; Section 3: Cable boxes type 2 for use on distribution transformers meeting the requirements of HD 428.2.1; German version HD 428.2.3 S1:1998 |
| DIN VDE 0532-31 | 變壓器和電抗器.帶負荷分接開關的選擇和應用指南 | Transformers and reactors; guide to selection and application of on-load tap-changers |
| DIN VDE 0534 | 變壓器的規定 | Regulations for transductors |
| DIN VDE 0536 | 油浸式變壓器加載指南 | Loading guide for oil-immersed transformers |
| DIN VDE 0552 | 裝有可在繞線方向橫向移動集電器的可調無線電變壓器的規范 | Specifications for variable-ratio transformers having current collectors which are moved transversely in the direction of the windings |
| DIN VDE 0670-402 | 電壓1kV以上的交流電開關裝置和控制裝置.變壓器電路用溶斷體選用指南 | A.c. switchgear and controlgear for voltages above 1 kV; application guide for the selection of fuse-links for transformer circuits |
| 編號 | 中文名稱 | 英文名稱 |