微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| IEC 60044-1 Edition 1.2 | 儀表用變壓器.第1部分:電流互感器 | Instrument transformers - Part 1: Current transformers |
| IEC 60044-2 Edition 1.2 | 儀表用變壓器.第2部分:感應電壓變壓器 | Instrument transformers - Part 2: Inductive voltage transformers |
| IEC 60044-2 | 儀表用變壓器.第2部分:感應電壓變壓器 | Instrument transformers - Part 2: Inductive voltage transformers |
| IEC 60050-421 | 國際電工詞匯 第421章:電力變壓器和電抗器 | International electrotechnical vocabulary; chapter 421: power transformers and reactors |
| IEC 60076-1 AMD 1 | 電力變壓器 第1部分:總則 修改1 | Power transformators - Part 1: General; Amendment 1 |
| IEC 60076-1 Corrigendum 1 | 電力變壓器.第1部分:總則 | Power transformators; part 1: general |
| IEC 60076-1 Edition 2.1 | 電力變壓器.第1部分:總則 | Power transformators - Part 1: General |
| IEC 60076-1 | 電力變壓器.第1部分:總則 | Power transformators; part 1: general |
| IEC 60076-10-1 | 電力變壓器.第10-1部分:聲級的測定.應用指南 | Power transformers - Part 10-1: Determination of sound levels - Application guide |
| IEC 60076-10 | 電力變壓器.第10部分:聲級的測定 | Power transformers - Part 10: Determination of sound levels |
| IEC 60076-11 | 電力變壓器.第11部分:干式變壓器 | Power transformers - Part 11: Dry-type transformers |
| IEC 60076-13 | 電力變壓器.第13部分:自我保護式充液變壓器 | Power transformers - Part 13: Self-protected liquid-filled transformers |
| IEC 60076-2 Corrigendum 1 | 電力變壓器.第2部分:溫升 | Power transformers; part 2: temperature rise |
| IEC 60076-2 | 電力變壓器 第2部分:溫升 | Power transformers; part 2: temperature rise |
| IEC 60076-3 Corrigendum 1 | 電力變壓器.第3部分:絕緣水平、電介質試驗和空氣中的外間隙 | Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air |
| IEC 60076-3 | 電力變壓器 第3部分:絕緣水平、電介質試驗和空氣中的外間隙 | Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air |
| IEC 60076-4 | 電力變壓器.第4部分:閃電脈沖和開關脈沖試驗指南.電力變壓器和反應器 | Power transformers - Part 4: Guide to the lightning impulse and switching impulse testing; Power transformers and reactors |
| IEC 60076-5 | 電力變壓器 第5部分:承受短路的能力 | Power transformers - Part 5: Ability to withstand short circuit |
| IEC 60076-7 | 電力變壓器.第7部分:油浸電力變壓器加載指南 | Power transformers - Part 7: Loading guide for oil-immersed power transformers |
| IEC 60076-8 | 電力變壓器 第8部分:應用指南 | Power transformers - Application guide |
| IEC 60092-303 AMD 1 | 船舶電氣設施 第303部分:設備 電力和照明變壓器 修改1 | Electrical installations in ships - Part 303: Equipment - Transformers for power and lighting; Amendment 1 |
| IEC 60092-303 | 船舶電氣設施 第303部分:設備 電力和照明變壓器 | Electrical installations in ships. Part 303 : Equipment - Transformers for power and lighting |
| IEC 60146-1-3 | 半導體變流器 一般要求和電網換相變流器 第1-3部分:變壓器和電抗器 | Semiconductor convertors; general requirements and line commutated convertors; part 1-3: transformers and reactors |
| IEC 60296 | 電工用液體.變壓器和開關設備用的未使用過的礦物絕緣油 | Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear |
| IEC 60310 | 鐵路設施.鐵路車輛用牽引變壓器和電感器 | Railway applications - Traction transformers and inductors on board rolling stock |
| IEC 60401-3 | 磁性軟鐵氧體制磁芯的術語和命名.第3部分:寫入變壓器和電感器磁芯制造廠產品目錄中的數據格式指南 | Terms and nomenclature for cores made of magnetically soft ferrites - Part 3: Guidelines on the format of data appearing in manufacturers' catalogues of transformer and inductor cores |
| IEC 60588-1 | 變壓器和電容器用氯化聯苯 第1部分:總則 | Askarels for transformers and capacitors. Part 1 : General |
| IEC 60588-2 | 變壓器和電容器用氯化聯苯 第2部分:試驗方法 | Askarels for transformers and capacitors. Part 2 : Test methods |
| IEC 60588-3 | 變壓器和電容器用氯化聯苯 第3部分:新氯化聯苯規范 | Askarels for transformers and capacitors. Part 3 : Specifications for new askarels |
| IEC 60588-4 | 變壓器和電容器用氯化聯苯 第4部分:設備中變壓器用氯化聯苯的維護指南 | Askarels for transformers and capacitors. Part 4 : Guide for maintenance of transformer askarels in equipment |
| IEC 60588-5 | 變壓器和電容器用氯化聯苯 第5部分:材料與變壓器用氯化聯苯相容性篩選試驗 | Askarels for transformers and capacitors. Part 5: Screening test for compatibility of materials and transformer askarels |
| IEC 60588-6 | 變壓器和電容器用氯化聯苯 第6部分:材料對電容器用氯化聯苯影響的篩選試驗 | Askarels for transformers and capacitors. Part 6 : Screening test for effects of materials on capacitor askarels |
| IEC 60598-2-6 AMD 1 | 燈具 第2部分:特殊要求 第6節:內裝變壓器的鎢絲燈燈具 修改1 | Luminaires - Part 2: Particular requirements - Section 6: Luminaires with built-in transformers for filament lamps; Amendment 1 |
| IEC 60598-2-6 Interpretation Sheet 1 | 燈具.第2部分:特殊要求.第6節:內裝變壓器的鎢絲燈燈具 | Luminaires - Part 2: Particular requirements - Section 6: Luminaires with built-in transformers for filament lamps |
| IEC 60598-2-6 | 燈具 第2部分:特殊要求 第6節:內裝變壓器的鎢絲燈燈具 | Luminaires - Part 2: Particular requirements - Section 6: Luminaires with built-in transformers for filament lamps |
| IEC 60723-1 | 通信用電感器和變壓器磁芯 第1部分:總規范 | Inductor and transformer cores for telecommunications. Part 1 : Generic specification |
| IEC 60723-2 AMD 1 | 通信用電感器和變壓器磁芯 第2部分:分規范:電感器用磁性氧化物磁芯 修改1 | Inductor and transformers cores for telecommunications; part 2: sectional specification; magnetic oxide cores for inductor applications; amendment No. 1 to publication 60723-2:1983 |
| IEC 60723-2-1 | 通信用電感器和變壓器磁芯 第2-1部分:分規范:電感器用磁性氧化物磁芯 空白詳細規范 評定水平A | Inductor and transformer cores for telecommunications. Part 2 : Sectional specification - Magnetic oxide cores for induction applications. Blank detail specification. Assessment level A |
| IEC 60723-2 | 通信用電感器和變壓器磁芯 第2部分:分規范:電感器用磁性氧化物磁芯 | Inductor and transformer cores for telecommunications. Part 2 : Sectional specification - Magnetic oxide cores for induction applications |
| IEC 60723-3-1 | 通信用電感器和變壓器磁芯 第3-1部分:分規范:寬帶變壓器用磁性氧化物磁芯 空白詳細規范 評定水平A和B | Inductor and transformer cores for telecommunications. Part 3 : Sectional specification: Magnetic oxide cores for broad-bandtransformers. Blank detail specification. Assessment levels A and B |
| IEC 60723-3 | 通信用電感器和變壓器磁芯 第3部分:分規范:寬帶變壓器用磁性氧化物磁芯 | Inductor and transformer cores for telecommunications. Part 3 : Sectional specification: Magnetic oxide cores for broad-bandtransformers |
| IEC 60723-4-1 | 通信用電感器和變壓器磁芯 第4-1部分:分規范:電源變壓器和扼流圈用磁性氧化物磁芯 空白詳細規范:評定水平A | Inductor and transformer cores for telecommunications. Part 4 : Sectional specification: magnetic oxide cores for transformers and chokes for power applications. Assessment level A |
| IEC 60723-4 | 通信用電感器和變壓器磁芯 第4部分:分規范:電源變壓器和扼流圈用磁性氧化物磁芯 | Inductor and transformer cores for telecommunications. Part 4 : Sectional specification: magnetic oxide cores for transformers and chokes for power applications |
| IEC 60723-5-1 | 通信用電感器和變壓器磁芯 第5部分:分規范:用于可調電感器和變壓器中的磁性氧化物磁芯的調節器 第1節:空白 | Inductor and transformer cores for telecommunications; part 5: sectional specification: adjusters used with magnetic oxide cores for use in adjustable inductors and transformers; section 1: blank detail specification; assessment level A |
| IEC 60723-5 | 通信用電感器和變壓器磁芯 第5部分:分規范:用于可調電感器和變壓器中的磁性氧化物磁芯的調節器 | Inductor and transformer cores for telecommunications; part 5: sectional specification: adjusters used with magnetic oxide cores for use in adjustable inductors and transformers |
| IEC 60740-1 | 變壓器和電感器用疊層鐵芯.第1部分:機械和電氣特性 | Laminations for transformers and inductors - Part 1: Mechanical and electrical characteristics |
| IEC 60740-2 | 通信和電子設備用變壓器和電感器用鐵芯片 第2部分:軟磁金屬材料制鐵芯片的最小磁導率規范 | Laminations for transformers and inductors for use in telecommunication and electronic equipment; part 2: specification for the minimum permeabilities of laminations made of soft magnetic metallic materials |
| IEC 60747-16-3 | 半導體器件.第16-3部分:微波集成電路.頻率變壓器 | Semiconductor devices - Part 16-3: Microwave integrated circuits; Frequency converters |
| IEC 60787 AMD 1 | 變壓器電路用高壓熔斷器熔斷體選擇的應用指南 修改1 | Application guide for the selection of fuse-links of high-voltage fuses for transformer circuit applications |
| IEC 60787 | 變壓器電路用高壓熔斷器熔斷體選擇的應用指南 | Application guide for the selection of fuse-links of high-voltage fuses for transformer circuit applications |
| IEC 60852-1 | 通信和電子設備用變壓器和電感器的外形尺寸 第1部分:使用YEI-1型鐵芯片的變壓器和電感器 | Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment. Part 1 : Transformers and inductors using YEI-1 laminations |
| IEC 60852-2 | 通信和電子設備用變壓器和電感器的外形尺寸 第2部分:采用印制板安裝用YEx-2鐵芯片的變壓器和電感器 | Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment; part 2: transformers and inductors using YEx-2 laminations for printed wiring board mounting |
| IEC 60852-3 | 通信和電子設備用變壓器和電感器的外形尺寸 第3部分:使用YUI-1型鐵芯片的變壓器和電感器 | Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment; part 3: transformers and inductors using YUI-1 laminations |
| IEC 60852-4 | 通信和電子設備用變壓器和電感器的外形尺寸 第4部分:使用YUI-2型鐵芯片的變壓器和電感器 | Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 4: Transformers and inductors using YUI-2 laminations |
| IEC 60852-5 | 通信和電子設備用變壓器和電感器的外形尺寸 第5部分:使用C鐵芯的Q系列變壓器和電感器 | Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 5: Transformers and inductors using the series Q of C-cores |
| IEC 60905 | 干式電力變壓器負載指南 | Loading guide for dry-type power transformers. |
| IEC 60944 | 變壓器硅油的維護指南 | Guide for the maintenance of silicone transformer liquids |
| IEC 61007 | 電子和通信設備用變壓器和電感器 測量方法和試驗程序 | Transformers and inductors for use in electronic and telecommunication equipment - Measuring methods and test procedures |
| IEC 61021-1 | 通信和電子設備用變壓器和電感器的疊片鐵芯包 第1部分:尺寸 | Laminated core packages for transformers and inductors used in telecommunication and electronic equipment; part 1: dimensions |
| IEC 61021-2 | 通信和電子設備用變壓器和電感器的疊片鐵芯包 第2部分:用YEE 2疊片鐵芯的電性能 | Laminated core packages for transformers and inductors for use in telecommunication and electronic equipment - Part 2: Electrical characteristics for cores using YEE 2 laminations |
| IEC 61050 AMD 1 | 空載輸出電壓超過100OV的管形放電燈用變壓器(通稱霓虹燈變壓器) 一般要求和安全要求 修改1 | Transformers for tubular discharge lamps having a no-load output voltage exceeding 1000 V (generally called neon-tranformers) - General and safety requirements; Amendment 1 |
| IEC 61050 Corrigendum 1 | 空載輸出電壓超過100OV的管形放電燈用變壓器(通稱霓虹燈變壓器).一般要求和安全要求 | Transformers for tubular discharge lamps having a no-load output voltage exceeding 1000 kV (generally called neon-transformers); general and safety requirements |
| IEC 61050 | 空載輸出電壓超過1000V的管形放電燈用變壓器(通稱霓虹燈變壓器) 一般要求和安全要求 | Transformers for tubular discharge lamps having a no-load output voltage exceeding 1000 kV (generally called neon-transformers); general and safety requirements |
| IEC 61186-1 | 電子和通信設備用變壓器和電感器 鐵芯及其組件的命名 第1部分:疊片鐵芯 | Transformers and inductors for use in telecommunication and electronic equipment; designations for cores and assemblies; part 1: laminated cores |
| IEC 61203 | 電工用合成有機酯 設備中變壓器酯類的維護指南 | Synthetic organic esters for electrical purposes; guide for maintenance of transformer esters in equipment |
| IEC 61248-1 | 電子和通信設備用變壓器和電感器 第1部分:總規范 | Transformers and inductors for use in electronic and telecommunication equipment - Part 1: Generic specification |
| IEC 61248-2 | 電子和通信設備用變壓器和電感器 第2部分:采用能力批準程序的信號變壓器分規范 | Transformers and inductors for use in electronic and telecommunication equipment - Part 2: Sectional specification for signal transformers on the basis of the capability approval procedure |
| IEC 61248-3 | 電子和通信設備用變壓器和電感器 第3部分:采用能力批準程序的電源變壓器分規范 | Transformers and inductors for use in electronic and telecommunication equipment - Part 3: Sectional specification for power transformers on the basis of the capability approval procedure |
| IEC 61248-4 | 電子和通信設備用變壓器和電感器 第4部分:采用能力批準程序的開關電源變壓器分規范 | Transformers and inductors for use in electronic and telecommunication equipment - Part 4: Sectional specification for power transformers for switched mode power supplies (SMPS) on the basis of the capability approval procedure |
| IEC 61248-5 | 電子和通信設備用變壓器和電感器 第5部分:采用能力批準程序的脈沖變壓器分規范 | Transformers and inductors for use in electronic and telecommunication equipment - Part 5: Sectional specification for pulse transformers on the basis of the capability approval procedure |
| IEC 61248-6 | 電子和通信設備用變壓器和電感器 第6部分:采用能力批準程序的電感器分規范 | Transformers and inductors for use in electronic and telecommunication equipment - Part 6: Sectional specification for inductors on the basis of the capability approval procedure |
| IEC 61248-7 | 電子和通信設備用變壓器和電感器 第7部分:采用能力批準程序的高頻電感器和中頻變壓器分規范 | Transformers and inductors for use in electronic and telecommunication equipment - Part 7: Sectional specification for high-frequency inductors and intermediate frequency transformers on the basis of the capability approval procedure |
| IEC 61378-1 | 變流變壓器 第1部分:工業用變流變壓器 | Convertor transformers - Part 1: Transformers for industrial applications |
| IEC 61378-2 | 變流變壓器 第2部分：高壓直流（HVDC）用變壓器 | Convertor transformers - Part 2: Transformers for HVDC applications |
| IEC 61378-3 | 變流變壓器.第2部分:應用指南 | Converter transformers - Part 3: Application guide |
| IEC 61558-1 Interpretation Sheet 1 | 電力變壓器、電源裝置及類似設備的安全.第1部分:一般要求和試驗.注釋單1 | Safety of power transformers, power supply units and similar - Part 1: General requirements and tests; Interpretation sheet 1 |
| IEC 61558-1 | 電力變壓器、電源裝置、電抗器及類似設備的安全.第1部分:一般要求和試驗 | Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests |
| IEC 61558-2-1 | 電力變壓器、電源裝置及類似設備的安全 第2-1部分:通用分離變壓器的特殊要求 | Safety of power transformers, power supply units and similar - Part 2: Particular requirements for separating transformers for general use |
| IEC 61558-2-12 | 電力變壓器、電源裝置及類似設備的安全 第2-12部分：恒變壓器的特殊要求 | Safety of power transformers, power supply units and similar devices - Part 2-12: Particular requirements for constant voltage transformers |
| IEC 61558-2-13 | 電力變壓器、電源裝置及類似設備的安全 第2-13部分:通用自耦變壓器的特殊要求 | Safety of power transformers, power supply units and similar devices - Part 2-13: Particular requirements for auto-transformers for general use |
| IEC 61558-2-15 | 電力變壓器、電源裝置及類似設備的安全 第2-15部分:醫療場所供電用隔離變壓器的特殊要求 | Safety of power transformers, power supply units and similar - Part 2-15: Particular requirements for isolating transformers for the supply of medical locations |
| IEC 61558-2-17 | 電力變壓器、電源裝置及類似設備的安全 第2-17部分:開關模式電源變壓器的特殊要求 | Safety of power transformers, power supply units and similar - Part 2: Particular requirements for transformers for switch mode power supplies |
| IEC 61558-2-19 | 電力變壓器、電源裝置及類似設備的安全 第2-19部分:擾動衰減變壓器的特殊要求 | Safety of power transformers, power supply units and similar devices - Part 2-19: Particular requirements for perturbation attenuation transformers |
| IEC 61558-2-2 | 電力變壓器、電源裝置及類似設備的安全 第2-2部分:控制變壓器的特殊要求 | Safety of power transformers, power supply units and similar - Part 2-2: Particular requirements for control transformers |
| IEC 61558-2-20 | 電力變壓器、電源裝置及類似設備的安全 第2-20部分:小型電抗器的特殊要求 | Safety of power transformers, power supply units and similar devices - Part 2-20: Particular requirements for small reactors |
| IEC 61558-2-23 | 電力變壓器、電源裝置及類似設備的安全 第2-23部分:建筑工地用變壓器的特殊要求 | Safety of power transformers, power supply units and similar devices - Part 2-23: Particular requirements for transformers for construction sites |
| IEC 61558-2-3 | 電力變壓器、電源裝置及類似設備的安全 第2-3部分:燃?xì)夂腿加忘c(diǎn)火變壓器的特殊要求 | Safety of power transformers, power supply units and similar devices - Part 2-3: Particular requirements for ignition transformers for gas and oil burners |
| IEC 61558-2-4 | 電力變壓器、電源裝置及類似設備的安全 第2-4部分:通用隔離變壓器的特殊要求 | Safety of power transformers, power supply units and similar - Part 2: Particular requirements for isolating transformers for general use |
| IEC 61558-2-5 | 電力變壓器、電源裝置及類似設備的安全 第2-5部分:剃須刀變壓器和剃刀電源裝置的特殊要求 | Safety of power transformers, power supply units and similar - Part 2-5: Particular requirements for shaver transformers and shaver supply units |
| IEC 61558-2-6 | 電力變壓器、電源裝置及類似設備的安全 第2-6部分:通用安全隔離變壓器的特殊要求 | Safety of power transformers, power supply units and similar - Part 2: Particular requirements for safety isolating transformers for general use |
| IEC 61558-2-7 | 電力變壓器、電源裝置及類似設備的安全 第2-7部分:玩具用變壓器的特殊要求 | Safety of power transformers, power supply units and similar - Part 2: Particular requirements for transformers for toys |
| IEC 61558-2-8 | 電力變壓器、電源裝置及類似設備的安全 第2-8部分:電鈴和電鬧鐘變壓器的特殊要求 | Safety of small power transformers, power supply units and similar - Part 2-8: Particular requirements for bell and chime transformers |
| IEC 61558-2-9 | 電力變壓器、供電設備及類似設備的安全.第2-9部分:Ⅲ類手用鎢絲燈的壓變壓器的特殊要求 | Safety of power transformers, power supply units and similar products - Part 2-9: Particular requirements for transformers for class III handlamps for tungsten filament lamps |
| IEC 61596 | 電感器和變壓器用磁氧化EP磁芯及其附件 尺寸 | Magnetic oxide EP-cores and associated parts for use in inductors and transformers - Dimensions |
| IEC 61797-1 | 電子和通信設備用變壓器和電感器 線圈骨架的主要尺寸 第1部分:疊層鐵芯線圈骨架 | Transformers and inductors for use in telecommunication and electronic equipment - Main dimensions of coil formers - Part 1: Coil formers for laminated cores |
| IEC 61823 | 機場照明和信標導航用電氣設備.AGL系列變壓器 | Electrical installations for lighting and beaconing of aerodromes - AGL series transformers |
| IEC 62032 | 移相變壓器的應用、規范和測試指南 | Guide for the application, specification, and testing of phase-shifting transformers |
| IEC 62041 | 電力變壓器、電源裝置、電抗器和類似產品.電磁兼容性要求 | Power transformers, power supply units, reactors and similar products - EMC requirements |
| IEC/TR 60616 | 電力變壓器端子和分接標志 | Terminal and tapping markings for power transformers |
| IEC/TR2 61639 | 額定電壓72 5kV及以上氣體絕緣金屬封閉開關設備和電力變壓器之間的直接連接 | Direct connection between power transformers and gas-insulated metal-enclosed switchgear for rated voltages of 72,5 kV and above |
| IEC/TS 60071-5 | 絕緣配合.第5部分:高壓直流電流變壓器站的工作程序 | Insulation co-ordination - Part 5: Procedures for high-voltage direct current (HVDC) converter stations |
| IEC/TS 60076-14 | 電力變壓器.第14部分:使用高溫絕緣材料的液浸式電力變壓器的設計和應用 | Power transformers - Part 14: Design and application of liquid-immersed power transformers using high-temperature insulation materials |
| 編號 | 中文名稱 | 英文名稱 |